| Year |
Citation |
Score |
| 2020 |
Du X, Hardt D, Anthony B. Real-Time Imaging of Invisible Micron-Scale Monolayer Patterns on a Moving Web Using Condensation Figures Ieee Transactions On Industrial Electronics. 67: 4077-4087. DOI: 10.1109/Tie.2019.2914632 |
0.316 |
|
| 2015 |
Nietner LF, Hardt DE. Direct-Write Photolithography for Cylindrical Tooling Fabrication in Roll-to-Roll Microcontact Printing Journal of Micro and Nano-Manufacturing. 3. DOI: 10.1115/1.4030766 |
0.345 |
|
| 2015 |
Saha B, Toh WQ, Liu E, Tor SB, Hardt DE, Lee J. A review on the importance of surface coating of micro/nano-mold in micro/nano-molding processes Journal of Micromechanics and Microengineering. 26. DOI: 10.1088/0960-1317/26/1/013002 |
0.358 |
|
| 2013 |
Mazzeo AD, Hardt DE. Centrifugal Casting of Microfluidic Components With PDMS Journal of Micro and Nano-Manufacturing. 1. DOI: 10.1115/1.4023754 |
0.677 |
|
| 2012 |
Petrzelka JE, Hale MR, Hardt DE. Contact pattern sensitivity and precision machine control in roll-to-roll microcontact printing Materials Research Society Symposium Proceedings. 1529: 51-57. DOI: 10.1557/Opl.2013.166 |
0.331 |
|
| 2012 |
Mazzeo AD, Lustrino ME, Hardt DE. Bubble removal in centrifugal casting: Combined effects of buoyancy and diffusion Polymer Engineering and Science. 52: 80-90. DOI: 10.1002/Pen.22049 |
0.656 |
|
| 2011 |
Dirckx ME, Hardt DE. Analysis and characterization of demolding of hot embossed polymer microstructures Journal of Micromechanics and Microengineering. 21. DOI: 10.1088/0960-1317/21/8/085024 |
0.328 |
|
| 2011 |
Fu G, Tor SB, Hardt DE, Loh NH. Effects of processing parameters on the micro-channels replication in microfluidic devices fabricated by micro injection molding Microsystem Technologies. 17: 1791-1798. DOI: 10.1007/S00542-011-1363-2 |
0.368 |
|
| 2010 |
Hardt DE, Anthony BW, Tor SB. A teaching factory for polymer microfabrication - μFac International Journal of Nanomanufacturing. 6: 137-151. DOI: 10.1504/Ijnm.2010.034779 |
0.341 |
|
| 2010 |
Tor SB, Fu G, Loh NH, Tay BY, Hardt DE. Metallic mould inserts for fabrication of polymer microfluidic devices International Journal of Nanomanufacturing. 6: 66-74. DOI: 10.1504/Ijnm.2010.034773 |
0.33 |
|
| 2010 |
Eusner T, Hale M, Hardt DE. Process robustness of hot embossing microfluidic devices Journal of Manufacturing Science and Engineering, Transactions of the Asme. 132: 0309201-0309208. DOI: 10.1115/1.4001421 |
0.332 |
|
| 2010 |
Fu G, Tor SB, Loh NH, Hardt DE. Fabrication of robust tooling for mass production of polymeric microfluidic devices Journal of Micromechanics and Microengineering. 20. DOI: 10.1088/0960-1317/20/8/085019 |
0.377 |
|
| 2010 |
Saha B, Liu E, Tor SB, Hardt DE, Chun JH, Khun NW. Improvement in lifetime and replication quality of Si micromold using N:DLC:Ni coatings for microfluidic devices Sensors and Actuators, B: Chemical. 150: 174-182. DOI: 10.1016/J.Snb.2010.07.019 |
0.301 |
|
| 2009 |
Henann DL, Srivastava V, Taylor HK, Hale MR, Hardt DE, Anand L. Metallic glasses: Viable tool materials for the production of surface microstructures in amorphous polymers by micro-hot-embossing Journal of Micromechanics and Microengineering. 19. DOI: 10.1088/0960-1317/19/11/115030 |
0.33 |
|
| 2009 |
Fu G, Tor SB, Loh NH, Hardt DE. Micro-hot-embossing of 316L stainless steel micro-structures Applied Physics a: Materials Science and Processing. 97: 925-931. DOI: 10.1007/S00339-009-5363-3 |
0.33 |
|
| 2008 |
Rzepniewski AK, Hardt DE. Development of general multivariable run-by-run control methods with application to a sheet metal forming process International Journal of Machine Tools and Manufacture. 48: 599-608. DOI: 10.1016/J.Ijmachtools.2007.06.014 |
0.353 |
|
| 2007 |
Dirckx M, Mazzeo AD, Hardt DE. Production of micro-molding tooling by hot embossing Proceedings of the Asme International Manufacturing Science and Engineering Conference 2007, Msec2007. 141-150. DOI: 10.1115/MSEC2007-31046 |
0.639 |
|
| 2007 |
Fu G, Tor S, Loh N, Tay B, Hardt DE. A micro powder injection molding apparatus for high aspect ratio metal micro-structure production Journal of Micromechanics and Microengineering. 17: 1803-1809. DOI: 10.1088/0960-1317/17/9/008 |
0.328 |
|
| 2007 |
Mazzeo AD, Dirckx M, Hardt DE. Process selection for microfluidic device manufacturing Annual Technical Conference - Antec, Conference Proceedings. 4: 1997-2001. |
0.64 |
|
| 2007 |
Mazzeo AD, Dirckx M, Hardt DE. Single-step through-hole punching by hot embossing Annual Technical Conference - Antec, Conference Proceedings. 5: 2931-2935. |
0.628 |
|
| 2001 |
Hardt DE, Norfleet WA, Valentin VM, Parris A. In process control of strain in a stretch forming process Journal of Engineering Materials and Technology, Transactions of the Asme. 123: 496-503. DOI: 10.1115/1.1397780 |
0.36 |
|
| 1999 |
Walczyk DF, Hardt DE. A comparison of rapid fabrication methods for sheet metal forming dies Journal of Manufacturing Science and Engineering, Transactions of the Asme. 121: 214-224. DOI: 10.1115/1.2831208 |
0.344 |
|
| 1998 |
Walczyk DF, Hardt DE. Rapid tooling for sheet metal forming using profiled edge laminations - Design principles and demonstration Journal of Manufacturing Science and Engineering, Transactions of the Asme. 120: 746-754. DOI: 10.1115/1.2830215 |
0.337 |
|
| 1998 |
Walczyk DF, Hardt DE. Design and Analysis of Reconfigurable Discrete Dies for Sheet Metal Forming Journal of Manufacturing Systems. 17: 436-454. DOI: 10.1016/S0278-6125(99)80003-X |
0.305 |
|
| 1994 |
Song J, Hardt DE. Dynamic Modeling and Adaptive Control of the Gas Metal Arc Welding Process Journal of Dynamic Systems, Measurement, and Control. 116: 405-413. DOI: 10.1115/1.2899235 |
0.366 |
|
| 1993 |
Hardt DE. Modeling and Control of Manufacturing Processes: Getting More Involved Journal of Dynamic Systems, Measurement, and Control. 115: 291-300. DOI: 10.1115/1.2899069 |
0.374 |
|
| 1993 |
Sharon A, Hogan N, Hardt DE. The macro/micro manipulator: An improved architecture for robot control Robotics and Computer Integrated Manufacturing. 10: 209-222. DOI: 10.1016/0736-5845(93)90056-P |
0.46 |
|
| 1992 |
Hardt DE, Constantine E, Wright A. Model of the sequential bending process for manufacturing simulation Journal of Engineering For Industry. 114: 181-187. DOI: 10.1115/1.2899770 |
0.303 |
|
| 1992 |
Hardt DE. Closed-Loop Sheet Metal Forming Processes Ifac Proceedings Volumes. 25: 187-192. DOI: 10.1016/S1474-6670(17)49490-0 |
0.372 |
|
| 1991 |
Webb RD, Hardt DE. Transfer function description of sheet metal forming for process control Journal of Engineering For Industry. 113: 44-52. DOI: 10.1115/1.2899621 |
0.331 |
|
| 1991 |
Suzuki A, Hardt DE, Valavani L. Application of adaptive control theory to on-line GTA weld geometry regulation Journal of Dynamic Systems, Measurement and Control, Transactions of the Asme. 113: 93-103. DOI: 10.1115/1.2896365 |
0.332 |
|
| 1991 |
Sharon A, Hogan N, Hardt DE. Controller design in the physical domain Journal of the Franklin Institute. 328: 697-721. DOI: 10.1016/0016-0032(91)90049-9 |
0.479 |
|
| 1989 |
Hardt D, Wright A, Constantine E. A Design Oriented Model of Plate Forming for Shipbbuilding Journal of Ship Production. 6: 212-218. DOI: 10.21236/Ada450627 |
0.323 |
|
| 1987 |
Hale M, Hardt DE. Dynamic Analysis and Control of a Roll Bending Process Ieee Control Systems Magazine. 7: 3-11. DOI: 10.1109/Mcs.1987.1105329 |
0.369 |
|
| 1987 |
Hardt DE, Jenne T, Domroese M, Farra R. Real-Time Control of Twist Deformation Cirp Annals - Manufacturing Technology. 36: 177-180. DOI: 10.1016/S0007-8506(07)62580-3 |
0.376 |
|
| 1985 |
Hardt DE, Chen B. CONTROL OF A SEQUENTIAL BRAKEFORMING PROCESS. Journal of Engineering For Industry. 107: 141-145. DOI: 10.1115/1.3185977 |
0.327 |
|
| 1985 |
Bates BE, Hardt DE. REAL-TIME CALIBRATED THERMAL MODEL FOR CLOSED-LOOP WELD BEAD GEOMETRY CONTROL. Journal of Dynamic Systems, Measurement and Control, Transactions of the Asme. 107: 25-33. DOI: 10.1115/1.3140703 |
0.31 |
|
| 1984 |
Hardt DE, Hale M, Cook NH. Closed Loop Control of a Roll Straightening Process Cirp Annals - Manufacturing Technology. 33: 137-140. DOI: 10.1016/S0007-8506(07)61396-1 |
0.399 |
|
| 1983 |
Hardt DE. SHAPE CONTROL IN METAL BENDING PROCESSES: THE MODEL MEASUREMENT TRADEOFF. . 35-40. DOI: 10.1016/S1474-6670(17)62773-3 |
0.348 |
|
| 1982 |
Zacksenhouse M, Hardt D. WELD POOL IMPEDANCE IDENTIFICATION FOR SIZE MEASUREMENT AND CONTROL. . 77-88. DOI: 10.1115/1.3140652 |
0.301 |
|
| 1982 |
Hardt DE, Roberts MA, Stelson KA. CLOSED-LOOP SHAPE CONTROL OF A ROLL-BENDING PROCESS. Journal of Dynamic Systems, Measurement and Control, Transactions of the Asme. 104: 317-322. DOI: 10.1115/1.3139715 |
0.348 |
|
| 1982 |
Hardt DE, Webb RD, Suh NP. Sheet Metal Die Forming Using Closed-Loop Shape Control Cirp Annals - Manufacturing Technology. 31: 165-169. DOI: 10.1016/S0007-8506(07)63290-9 |
0.349 |
|
| 1980 |
Hardt DE, Mann RW. A five body--three dimensional dynamic analysis of walking. Journal of Biomechanics. 13: 455-7. PMID 7400173 DOI: 10.1016/0021-9290(80)90040-8 |
0.48 |
|
| 1980 |
Hardt DE, Gossard DC. A variable geometry die for sheet metal forming: Machine design and control Ieee Transactions On Automatic Control. 123. DOI: 10.1109/Jacc.1980.4232204 |
0.306 |
|
| Show low-probability matches. |