Year |
Citation |
Score |
2013 |
Raman S, Gilbert RC, Trafalis TB. Coordinate metrology for adaptive form verification Manufacturing Letters. 1: 59-61. DOI: 10.1016/J.Mfglet.2013.10.003 |
0.439 |
|
2013 |
Aguirre-Cruz JA, Raman S. Origin offset and axes misalignment compensation in complex form parameter estimation using CMM. The International Journal of Advanced Manufacturing Technology. 68: 2771-2790. DOI: 10.1007/S00170-013-4838-8 |
0.373 |
|
2011 |
Parthasarathy J, Starly B, Raman S. A design for the additive manufacture of functionally graded porous structures with tailored mechanical properties for biomedical applications Journal of Manufacturing Processes. 13: 160-170. DOI: 10.1016/J.Jmapro.2011.01.004 |
0.746 |
|
2011 |
Obeidat SM, Raman S. Process-guided coordinate sampling of end-milled flat plates International Journal of Advanced Manufacturing Technology. 53: 979-991. DOI: 10.1007/S00170-010-2885-Y |
0.743 |
|
2011 |
Gilbert RC, Raman S, Trafalis TB. Mathematical framework for form inspection International Journal of Advanced Manufacturing Technology. 52: 637-649. DOI: 10.1007/S00170-010-2737-9 |
0.441 |
|
2010 |
Parthasarathy J, Starly B, Raman S, Christensen A. Mechanical evaluation of porous titanium (Ti6Al4V) structures with electron beam melting (EBM). Journal of the Mechanical Behavior of Biomedical Materials. 3: 249-59. PMID 20142109 DOI: 10.1016/J.Jmbbm.2009.10.006 |
0.748 |
|
2010 |
Gilbert RC, Raman S, Trafalis TB. Form inspection using kernel methods Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 224: 847-852. DOI: 10.1243/09544054JEM1433 |
0.314 |
|
2009 |
Parthasarathy J, Starly B, Raman S. Computer aided biomodeling and analysis of patient specific porous titanium mandibular implants Journal of Medical Devices, Transactions of the Asme. 3. DOI: 10.1115/1.3192104 |
0.718 |
|
2009 |
Gilbert RC, Raman S, Trafalis TB, Obeidat SM, Aguirre-Cruz JA. Mathematical foundations for form inspection and adaptive sampling Journal of Manufacturing Science and Engineering, Transactions of the Asme. 131: 0410011-0410018. DOI: 10.1115/1.3160582 |
0.727 |
|
2009 |
Agbaraji C, Raman S. Basic observations in the flat lapping of aluminum and steels using standard abrasives The International Journal of Advanced Manufacturing Technology. 44: 293-305. DOI: 10.1007/S00170-008-1827-4 |
0.735 |
|
2009 |
Obeidat SM, Raman S. An intelligent sampling method for inspecting free-form surfaces International Journal of Advanced Manufacturing Technology. 40: 1125-1136. DOI: 10.1007/S00170-008-1427-3 |
0.738 |
|
2008 |
Deshpande LS, Raman S, Sunanta O, Agbaraji C. Observations in the flat lapping of stainless steel and bronze Wear. 265: 105-116. DOI: 10.1016/J.Wear.2007.09.004 |
0.735 |
|
2008 |
Aguirre-Cruz JA, Raman S. Mathematical tolerance verification of N-sided prisms using Fourier analysis The International Journal of Advanced Manufacturing Technology. 36: 114-131. DOI: 10.1007/S00170-006-0824-8 |
0.354 |
|
2008 |
Balakrishna P, Raman S, Trafalis TB, Santosa B. Support vector regression for determining the minimum zone sphericity International Journal of Advanced Manufacturing Technology. 35: 916-923. DOI: 10.1007/S00170-006-0774-1 |
0.424 |
|
2007 |
Raman S, Basu A, Kilic DS. Analysis of fractal frictional contact in machining Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 221: 1119-1128. DOI: 10.1243/09544054JEM740 |
0.766 |
|
2007 |
Kilic DS, Raman S. Observations of the tool-chip boundary conditions in turning of aluminum alloys Wear. 262: 889-904. DOI: 10.1016/J.Wear.2006.08.019 |
0.759 |
|
2007 |
Kilic B, Aguirre-Cruz JA, Raman S. Inspection of the cylindrical surface feature after turning using coordinate metrology International Journal of Machine Tools and Manufacture. 47: 1893-1903. DOI: 10.1016/J.Ijmachtools.2007.03.007 |
0.423 |
|
2006 |
Balakrishna P, Raman S. An integrated approach for the estimation of spherical form tolerance Journal of Manufacturing Systems. 25: 172-183. DOI: 10.1016/S0278-6125(08)00004-6 |
0.42 |
|
2005 |
Raman S, Trafalis TB, Gilbert RC. Adaptive methods in coordinate metrology Proceedings of Spie - the International Society For Optical Engineering. 5999. DOI: 10.1117/12.631522 |
0.314 |
|
2005 |
Aguirre-Cruz JA, Raman S. Torus Form Inspection Using Coordinate Sampling Journal of Manufacturing Science and Engineering-Transactions of the Asme. 127: 84-95. DOI: 10.1115/1.1842134 |
0.403 |
|
2005 |
Badar MA, Raman S, Pulat PS, Shehab RL. Experimental analysis of search-based selection of sample points for straightness and flatness estimation Journal of Manufacturing Science and Engineering, Transactions of the Asme. 127: 96-103. DOI: 10.1115/1.1828051 |
0.746 |
|
2005 |
Badar MA, Raman S, Pulat PS. Experimental verification of manufacturing error pattern and its utilization in form tolerance sampling International Journal of Machine Tools and Manufacture. 45: 63-73. DOI: 10.1016/J.Ijmachtools.2004.06.017 |
0.751 |
|
2004 |
Prakasvudhisarn C, Raman S. Framework for cone feature measurement using coordinate measuring machines Journal of Manufacturing Science and Engineering, Transactions of the Asme. 126: 169-177. DOI: 10.1115/1.1644541 |
0.78 |
|
2003 |
Prakasvudhisarn C, Trafalis TB, Raman S. Support vector regression for determination of minimum zone Journal of Manufacturing Science and Engineering, Transactions of the Asme. 125: 736-739. DOI: 10.1115/1.1596572 |
0.769 |
|
2003 |
Badar MA, Raman S, Pulat PS. Intelligent search-based selection of sample points for straightness and flatness estimation Journal of Manufacturing Science and Engineering, Transactions of the Asme. 125: 263-271. DOI: 10.1115/1.1556859 |
0.732 |
|
2002 |
Malyscheff AM, Trafalis TB, Raman S. From support vector machine learning to the determination of the minimum enclosing zone Computers and Industrial Engineering. 42: 59-74. DOI: 10.1016/S0360-8352(02)00003-7 |
0.372 |
|
2002 |
Raman S, Longstreet A, Guha D. A fractal view of tool–chip interfacial friction in machining Wear. 253: 1111-1120. DOI: 10.1016/S0043-1648(02)00238-7 |
0.372 |
|
2001 |
Gupta M, Raman S. Machine vision assisted characterization of machined surfaces International Journal of Production Research. 39: 759-784. DOI: 10.1080/00207540010011045 |
0.384 |
|
2000 |
Kim WS, Raman S. On the selection of flatness measurement points in coordinate measuring machine inspection International Journal of Machine Tools and Manufacture. 40: 427-443. DOI: 10.1016/S0890-6955(99)00059-0 |
0.426 |
|
1995 |
Nagarwala MY, Pulat PS, Raman S. A Slope-Based Method for Least Cost Tolerance Allocation: Concurrent Engineering. 3: 319-328. DOI: 10.1177/1063293X9500300407 |
0.303 |
|
1995 |
Irani SA, Koo HY, Raman S. Feature-based operation sequence generation in CAPP International Journal of Production Research. 33: 17-39. DOI: 10.1080/00207549508930135 |
0.309 |
|
1995 |
Shaik AR, Raman S, Civan F, Cohen PH. A new forward temperature estimator for remote thermocouple sensing in machining International Journal of Mechanical Sciences. 37: 511-526. DOI: 10.1016/0020-7403(94)00076-V |
0.305 |
|
1993 |
Raman S, Cohen PH. Remote sensing for on-line temperature estimation in machining: A basic framework Journal of Materials Processing Technology. 38: 613-632. DOI: 10.1016/0924-0136(93)90073-F |
0.333 |
|
1993 |
Raman S, Lakkaraju R. The effect of tool life and other process variables in NC path planning Computers and Industrial Engineering. 24: 315-328. DOI: 10.1016/0360-8352(93)90017-R |
0.355 |
|
1993 |
Damodarasamy S, Raman S. An inexpensive system for classifying tool wear states using pattern recognition Wear. 170: 149-160. DOI: 10.1016/0043-1648(93)90235-E |
0.318 |
|
1992 |
Raman S, Lakkaraju RK. Incorporation of tool-life variables in NC path planning International Journal of Production Research. 30: 2545-2558. DOI: 10.1080/00207549208948175 |
0.332 |
|
1992 |
Singh R, Raman S. METEX—An expert system for machining planning International Journal of Production Research. 30: 1501-1516. DOI: 10.1080/00207549208948104 |
0.359 |
|
1992 |
Lakkaraju RK, Raman S, Irani SA. An analytical model for optimization of nc tool cutting path International Journal of Production Research. 30: 109-127. DOI: 10.1080/00207549208942881 |
0.347 |
|
1991 |
Damodarasamy S, Raman S. Texture analysis using computer vision Computers in Industry. 16: 25-34. DOI: 10.1016/0166-3615(91)90005-T |
0.366 |
|
1989 |
Bidanda B, Rubinovitz J, Raman S. Development of a spatter index for automated welding inspection using computer vision Computers and Industrial Engineering. 16: 215-224. DOI: 10.1016/0360-8352(89)90140-X |
0.325 |
|
1988 |
Anand S, Raman S. An algorithm for vertex detection Computers & Industrial Engineering. 14: 77-83. DOI: 10.1016/0360-8352(88)90016-2 |
0.302 |
|
1988 |
Anand S, Raman S, Wysk RA. Vision assisted NC milling path generation Journal of Manufacturing Systems. 7: 233-240. DOI: 10.1016/0278-6125(88)90007-6 |
0.313 |
|
Show low-probability matches. |