Year |
Citation |
Score |
2021 |
Pedgaonkar A, Darrall BT, Dargush GF. Mixed displacement and couple stress finite element method for anisotropic centrosymmetric materials European Journal of Mechanics a-Solids. 85: 104074. DOI: 10.1016/J.Euromechsol.2020.104074 |
0.43 |
|
2020 |
Guarín-Zapata N, Gomez J, Valencia C, Dargush GF, Hadjesfandiari AR. Finite element modeling of micropolar-based phononic crystals Wave Motion. 92: 102406. DOI: 10.1016/J.Wavemoti.2019.102406 |
0.467 |
|
2019 |
Damiano RJ, Tutino VM, Lamooki SR, Paliwal N, Dargush GF, Davies JM, Siddiqui AH, Meng H. Improving accuracy for finite element modeling of endovascular coiling of intracranial aneurysm. Plos One. 14: e0226421. PMID 31881029 DOI: 10.1371/Journal.Pone.0226421 |
0.335 |
|
2019 |
Hadjesfandiari AR, Furlani EP, Hajesfandiari A, Dargush GF. Size Effects in Vibrating Silicon Crystal Microbeams Journal of Engineering Mechanics. 145: 04018136. DOI: 10.1061/(Asce)Em.1943-7889.0001565 |
0.759 |
|
2018 |
Chakravarty S, Das S, Hadjesfandiari AR, Dargush GF. VARIATIONAL INEQUALITIES FOR HETEROGENEOUS MICROSTRUCTURES BASED ON COUPLE-STRESS THEORY International Journal For Multiscale Computational Engineering. 16: 101-119. DOI: 10.1615/Intjmultcompeng.2018022854 |
0.331 |
|
2018 |
Rafiee-Dehkharghani R, Bansal D, Aref AJ, Dargush GF. Analysis and Optimal Design of Stress Wave Intensity Attenuation in Layered Structures International Journal of Structural Stability and Dynamics. 18: 1850015. DOI: 10.1142/S0219455418500153 |
0.376 |
|
2018 |
Hajesfandiari A, Hadjesfandiari A, Dargush G. Couple stress Rayleigh–Bénard convection in a square cavity Journal of Non-Newtonian Fluid Mechanics. 259: 91-110. DOI: 10.1016/J.Jnnfm.2018.03.008 |
0.815 |
|
2018 |
Wetherhold RC, Dargush GF, Mhatre TS. Effects of free-edge interface angle on bi-material shear strength International Journal of Mechanical Sciences. 144: 262-273. DOI: 10.1016/J.Ijmecsci.2018.05.048 |
0.325 |
|
2018 |
Darrall BT, Dargush GF. Variational principle and time-space finite element method for dynamic thermoelasticity based on mixed convolved action European Journal of Mechanics - a/Solids. 71: 351-364. DOI: 10.1016/J.Euromechsol.2018.03.002 |
0.536 |
|
2017 |
Kim J, Dargush GF, Roh H, Ryu J, Kim D. Unified Space–Time Finite Element Methods for Dissipative Continua Dynamics International Journal of Applied Mechanics. 9: 1750019. DOI: 10.1142/S1758825117500193 |
0.695 |
|
2017 |
Apostolakis G, Dargush GF. Mixed Lagrangian Formalism for Temperature-Dependent Dynamic Thermoplasticity Journal of Engineering Mechanics. 143: 04017094. DOI: 10.1061/(Asce)Em.1943-7889.0001293 |
0.602 |
|
2017 |
Chakravarty S, Hadjesfandiari AR, Dargush GF. A penalty-based finite element framework for couple stress elasticity Finite Elements in Analysis and Design. 130: 65-79. DOI: 10.1016/J.Finel.2016.11.004 |
0.505 |
|
2017 |
Hajesfandiari A, Hadjesfandiari AR, Dargush GF. Boundary element formulation for steady state plane problems in size-dependent thermoelasticity Engineering Analysis With Boundary Elements. 82: 210-226. DOI: 10.1016/J.Enganabound.2017.02.004 |
0.829 |
|
2016 |
Bansal D, Aref A, Dargush G, Delaire O. Modeling non-harmonic behavior of materials from experimental inelastic neutron scattering and thermal expansion measurements. Journal of Physics. Condensed Matter : An Institute of Physics Journal. 28: 385201. PMID 27438881 DOI: 10.1088/0953-8984/28/38/385201 |
0.331 |
|
2016 |
Darrall BT, Dargush GF. Mixed Convolved Action Variational Methods for Poroelasticity Journal of Applied Mechanics. 83. DOI: 10.1115/1.4033753 |
0.523 |
|
2016 |
Rafiee-Dehkharghani R, Aref AJ, Dargush GF. Stress wave attenuation in noncollinear structures subjected to impulsive transient loadings Journal of Engineering Mechanics. 142. DOI: 10.1061/(Asce)Em.1943-7889.0001064 |
0.329 |
|
2016 |
Dargush GF, Soom A. Contact modeling in boundary element analysis including the simulation of thermomechanical wear Tribology International. 100: 360-370. DOI: 10.1016/J.Triboint.2016.04.001 |
0.366 |
|
2016 |
Kim J, Dargush G, Lee HS. Extended framework of Hamilton's principle in heat diffusion International Journal of Mechanical Sciences. 114: 166-176. DOI: 10.1016/J.Ijmecsci.2016.04.007 |
0.717 |
|
2016 |
Dargush GF, Apostolakis G, Darrall BT, Kim J. Mixed convolved action variational principles in heat diffusion International Journal of Heat and Mass Transfer. 100: 790-799. DOI: 10.1016/J.Ijheatmasstransfer.2016.03.101 |
0.78 |
|
2016 |
Deng G, Dargush GF. Mixed Lagrangian formulation for size-dependent couple stress elastodynamic response Acta Mechanica. 1-23. DOI: 10.1007/S00707-016-1644-Z |
0.498 |
|
2016 |
Deng G, Dargush GF. Mixed Lagrangian formulation for size-dependent couple stress elastodynamic and natural frequency analyses International Journal For Numerical Methods in Engineering. 109: 809-836. DOI: 10.1002/Nme.5310 |
0.358 |
|
2016 |
Hajesfandiari A, Hadjesfandiari AR, Dargush GF. Boundary element formulation for plane problems in size-dependent piezoelectricity International Journal For Numerical Methods in Engineering. DOI: 10.1002/Nme.5227 |
0.827 |
|
2015 |
Hajesfandiari A, Dargush GF, Hadjesfandiari AR. Size-dependent fluid dynamics with application to lid-driven cavity flow Journal of Non-Newtonian Fluid Mechanics. 223: 98-115. DOI: 10.1016/J.Jnnfm.2015.05.008 |
0.8 |
|
2015 |
Darrall BT, Hadjesfandiari AR, Dargush GF. Size-dependent piezoelectricity: A 2D finite element formulation for electric field-mean curvature coupling in dielectrics European Journal of Mechanics, a/Solids. 49: 308-320. DOI: 10.1016/J.Euromechsol.2014.07.013 |
0.488 |
|
2015 |
Ahn IS, Chen SS, Dargush GF, Cheng L. Dynamic Ratcheting in SDOF hysteretic damping systems induced by earthquake excitations Engineering Structures. 100: 665-673. DOI: 10.1016/J.Engstruct.2015.06.048 |
0.306 |
|
2015 |
Rafiee-Dehkharghani R, Bansal D, Aref AJ, Dargush GF. Interface profile optimization for planar stress wave attenuation in bi-layered plates Composites Part B: Engineering. 82: 129-142. DOI: 10.1016/J.Compositesb.2015.08.010 |
0.336 |
|
2015 |
Rafiee-Dehkharghani R, Aref AJ, Dargush GF. Planar stress wave attenuation in plates with circular voids and inclusions Composites Part B: Engineering. 75: 307-318. DOI: 10.1016/J.Compositesb.2015.01.051 |
0.373 |
|
2015 |
Dargush GF, Darrall BT, Kim J, Apostolakis G. Mixed convolved action principles in linear continuum dynamics Acta Mechanica. 226: 4111-4137. DOI: 10.1007/S00707-015-1468-2 |
0.793 |
|
2015 |
Hadjesfandiari AR, Hajesfandiari A, Dargush GF. Skew-symmetric couple-stress fluid mechanics Acta Mechanica. 226: 871-895. DOI: 10.1007/S00707-014-1223-0 |
0.799 |
|
2014 |
Apostolakis G, Dargush GF, Filiatrault A. Computational framework for automated seismic design of steel frames with self-centering connections Journal of Computing in Civil Engineering. 28: 170-181. DOI: 10.1061/(Asce)Cp.1943-5487.0000226 |
0.596 |
|
2014 |
Darrall BT, Dargush GF, Hadjesfandiari AR. Finite element Lagrange multiplier formulation for size-dependent skew-symmetric couple-stress planar elasticity Acta Mechanica. 225: 195-212. DOI: 10.1007/S00707-013-0944-9 |
0.501 |
|
2013 |
Nasiri P, Dargush GF. Variational integrators for piezoelectricity Asme International Mechanical Engineering Congress and Exposition, Proceedings (Imece). 9. DOI: 10.1115/IMECE2013-65356 |
0.413 |
|
2013 |
Hadjesfandiari AR, Dargush GF, Hajesfandiari A. Consistent skew-symmetric couple stress theory for size-dependent creeping flow Journal of Non-Newtonian Fluid Mechanics. 196: 83-94. DOI: 10.1016/J.Jnnfm.2012.12.012 |
0.822 |
|
2013 |
Kim J, Dargush GF, Ju YK. Extended framework of Hamilton's principle for continuum dynamics International Journal of Solids and Structures. 50: 3418-3429. DOI: 10.1016/J.Ijsolstr.2013.06.015 |
0.68 |
|
2013 |
Hadjesfandiari AR, Dargush GF. Fundamental solutions for isotropic size-dependent couple stress elasticity International Journal of Solids and Structures. 50: 1253-1265. DOI: 10.1016/J.Ijsolstr.2012.12.021 |
0.415 |
|
2013 |
Apostolakis G, Dargush GF. Mixed variational principles for dynamic response of thermoelastic and poroelastic continua International Journal of Solids and Structures. 50: 642-650. DOI: 10.1016/J.Ijsolstr.2012.10.021 |
0.663 |
|
2013 |
Kim D, Dargush GF, Basaran C. A cyclic two-surface thermoplastic damage model with application to metallic plate dampers Engineering Structures. 52: 608-620. DOI: 10.1016/J.Engstruct.2013.02.030 |
0.367 |
|
2013 |
Rezaei-Bazkiaei A, Dehghan-Niri E, Kolahdouz EM, Weber AS, Dargush GF. A passive design strategy for a horizontal ground source heat pump pipe operation optimization with a non-homogeneous soil profile Energy and Buildings. 61: 39-50. DOI: 10.1016/J.Enbuild.2013.01.040 |
0.306 |
|
2013 |
Kim DK, Dargush GF, Hu JW. Cyclic damage model for E-shaped dampers in the seismic isolation system Journal of Mechanical Science and Technology. 27: 2275-2281. DOI: 10.1007/S12206-013-0610-0 |
0.345 |
|
2013 |
Apostolakis G, Dargush GF. Variational methods in irreversible thermoelasticity: Theoretical developments and minimum principles for the discrete form Acta Mechanica. 224: 2065-2088. DOI: 10.1007/S00707-013-0843-0 |
0.641 |
|
2012 |
Dargush GF, Kim J. Mixed convolved action. Physical Review. E, Statistical, Nonlinear, and Soft Matter Physics. 85: 066606. PMID 23005236 DOI: 10.1103/Physreve.85.066606 |
0.652 |
|
2012 |
Ma D, Dargush GF, Natarajan SK, Levy EI, Siddiqui AH, Meng H. Computer modeling of deployment and mechanical expansion of neurovascular flow diverter in patient-specific intracranial aneurysms. Journal of Biomechanics. 45: 2256-63. PMID 22818662 DOI: 10.1016/J.Jbiomech.2012.06.013 |
0.327 |
|
2012 |
Kim DK, Shin SW, Dargush GF. A two surface plasticity model for uniaxial ratchetting of cyclically stabilized material Advanced Science Letters. 8: 783-788. DOI: 10.1166/Asl.2012.2433 |
0.31 |
|
2012 |
Kim DK, Dargush GF. An elastoplastic damage model for energy dissipation devices Advanced Science Letters. 8: 666-670. DOI: 10.1166/Asl.2012.2423 |
0.387 |
|
2012 |
Dargush GF. Mixed convolved action for classical and fractional-derivative dissipative dynamical systems Physical Review E - Statistical, Nonlinear, and Soft Matter Physics. 86. DOI: 10.1103/Physreve.86.066606 |
0.416 |
|
2012 |
Apostolakis G, Dargush GF. Mixed Lagrangian Formulation for Linear Thermoelastic Response of Structures Journal of Engineering Mechanics. 138: 508-518. DOI: 10.1061/(Asce)Em.1943-7889.0000346 |
0.663 |
|
2012 |
Luo X, Aref AJ, Dargush GF. Optimal design of bundled layered elastic stress wave attenuators Journal of Computing in Civil Engineering. 26: 387-395. DOI: 10.1061/(Asce)Cp.1943-5487.0000143 |
0.313 |
|
2012 |
Rezaei B. A, Kolahdouz EM, Dargush GF, Weber AS. Ground source heat pump pipe performance with Tire Derived Aggregate International Journal of Heat and Mass Transfer. 55: 2844-2853. DOI: 10.1016/J.Ijheatmasstransfer.2012.02.004 |
0.363 |
|
2012 |
Kim DK, Dargush GF, Shin SW, Hu JW. A two surface plasticity model for the simulation of uniaxial ratchetting response Journal of Mechanical Science and Technology. 26: 145-152. DOI: 10.1007/S12206-011-1019-2 |
0.301 |
|
2012 |
Hu Y, Dargush GF, Shao X. A conceptual evolutionary aseismic decision support framework for hospitals Earthquake Engineering and Engineering Vibration. 11: 499-512. DOI: 10.1007/S11803-012-0137-X |
0.432 |
|
2012 |
Hadjesfandiari AR, Dargush GF. Boundary element formulation for plane problems in couple stress elasticity International Journal For Numerical Methods in Engineering. 89: 618-636. DOI: 10.1002/Nme.3256 |
0.537 |
|
2011 |
Hadjesfandiari AR, Dargush GF. Couple stress theory for solids International Journal of Solids and Structures. 48: 2496-2510. DOI: 10.1016/J.Ijsolstr.2011.05.002 |
0.464 |
|
2011 |
Hadjesfandiari AR, Dargush GF. Analysis of bi-material interface cracks with complex weighting functions and non-standard quadrature International Journal of Solids and Structures. 48: 1499-1512. DOI: 10.1016/J.Ijsolstr.2011.01.036 |
0.418 |
|
2010 |
Ballantyne GJ, Whittaker AS, Dargush GF, Aref AJ. Air-blast effects on structural shapes of finite width Journal of Structural Engineering. 136: 152-159. DOI: 10.1061/(Asce)St.1943-541X.0000049 |
0.359 |
|
2010 |
Apostolakis G, Dargush GF. Optimal seismic design of moment-resisting steel frames with hysteretic passive devices Earthquake Engineering and Structural Dynamics. 39: 355-376. DOI: 10.1002/Eqe.944 |
0.595 |
|
2009 |
Lavan O, Dargush GF. Multi-objective evolutionary seismic design with passive energy dissipation systems Journal of Earthquake Engineering. 13: 758-790. DOI: 10.1080/13632460802598545 |
0.328 |
|
2009 |
Ahn IS, Chen SS, Dargush GF. An iterated maps approach for dynamic ratchetting in sdof hysteretic damping systems Journal of Sound and Vibration. 323: 896-909. DOI: 10.1016/J.Jsv.2009.01.009 |
0.328 |
|
2009 |
Luo X, Aref AJ, Dargush GF. Analysis and optimal design of layered structures subjected to impulsive loading Computers and Structures. 87: 543-551. DOI: 10.1016/J.Compstruc.2009.01.016 |
0.303 |
|
2009 |
Lavan O, Sivaselvan MV, Reinhorn AM, Dargush GF. Progressive collapse analysis through strength degradation and fracture in the Mixed Lagrangian Formulation Earthquake Engineering and Structural Dynamics. 38: 1483-1504. DOI: 10.1002/Eqe.914 |
0.338 |
|
2009 |
Sivaselvan MV, Lavan O, Dargush GF, Kurino H, Hyodo Y, Fukuda R, Sato K, Apostolakis G, Reinhorn AM. Numerical collapse simulation of large-scale structural systems using an optimization-based algorithm Earthquake Engineering and Structural Dynamics. 38: 655-677. DOI: 10.1002/Eqe.895 |
0.61 |
|
2008 |
Barham W, Aref A, Dargush G. On the elastoplastic cyclic analysis of plane beam structures using a flexibility-based finite element approach International Journal of Solids and Structures. 45: 5688-5704. DOI: 10.1016/J.Ijsolstr.2008.06.021 |
0.466 |
|
2008 |
Dogruel S, Dargush GF. A Framework for multi-hazard design and retrofit of passively damped structures Proceedings of the Aei 2008 Conference - Aei 2008: Building Integration Solutions. 328. |
0.712 |
|
2007 |
Marin-Artieda CC, Dargush GF. Approximate limit load evaluation of structural frames using linear elastic analysis Engineering Structures. 29: 296-304. DOI: 10.1016/J.Engstruct.2006.03.013 |
0.339 |
|
2006 |
Grigoriev MM, Dargush GF. Multi-level boundary element method: Novel computational tool for large-scale heat conduction simulations Journal of Computational and Theoretical Nanoscience. 3: 525-537. DOI: 10.1166/Jctn.2006.3038 |
0.728 |
|
2006 |
Ahn IS, Chen SS, Dargush GF. Dynamic ratcheting in elastoplastic single-degree-of-freedom systems Journal of Engineering Mechanics. 132: 411-421. DOI: 10.1061/(Asce)0733-9399(2006)132:4(411) |
0.315 |
|
2005 |
Hadjesfandiari AR, Dargush GF. Boundary element analysis of interface cracks American Society of Mechanical Engineers, Applied Mechanics Division, Amd. 256: 507-515. DOI: 10.1115/IMECE2005-82155 |
0.331 |
|
2005 |
Dargush GF, Grigoriev MM. A multi-level multi-integral algorithm for the Helmholtz equation American Society of Mechanical Engineers, Noise Control and Acoustics Division (Publication) Nca. 32: 41-48. DOI: 10.1115/IMECE2005-81889 |
0.679 |
|
2005 |
Grigoriev MM, Dargush GF. Multi-level boundary element methods for steady heat diffusion in three-dimensions American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 376: 183-190. DOI: 10.1115/IMECE2005-81884 |
0.678 |
|
2005 |
Grigoriev MM, Dargush GF. Accurate boundary element solutions for highly convective unsteady heat flows Journal of Heat Transfer. 127: 1138-1150. DOI: 10.1115/1.2035109 |
0.738 |
|
2005 |
Dargush GF, Grigoriev MM. Fast and accurate solutions of steady stokes flows using multilevel boundary element methods Journal of Fluids Engineering, Transactions of the Asme. 127: 640-646. DOI: 10.1115/1.1949648 |
0.712 |
|
2005 |
Barham WS, Aref AJ, Dargush GF. Development of the large increment method for elastic perfectly plastic analysis of plane frame structures under monotonic loading International Journal of Solids and Structures. 42: 6586-6609. DOI: 10.1016/J.Ijsolstr.2005.06.020 |
0.466 |
|
2005 |
Barham WS, Aref AJ, Dargush GF. Flexibility-based large increment method for analysis of elastic-perfectly plastic beam structures Computers and Structures. 83: 2453-2462. DOI: 10.1016/J.Compstruc.2005.03.037 |
0.484 |
|
2005 |
Grigoriev MM, Dargush GF. A multi-level boundary element method for Stokes flows in irregular two-dimensional domains Computer Methods in Applied Mechanics and Engineering. 194: 3553-3581. DOI: 10.1016/J.Cma.2004.08.012 |
0.728 |
|
2005 |
Grigoriev MM, Dargush GF. A boundary element method for steady convective heat diffusion in three-dimensions Computer Methods in Applied Mechanics and Engineering. 194: 2109-2125. DOI: 10.1016/J.Cma.2004.07.010 |
0.731 |
|
2005 |
Wang CH, Grigoriev MM, Dargush GF. A fast multi-level convolution boundary element method for transient diffusion problems International Journal For Numerical Methods in Engineering. 62: 1895-1926. DOI: 10.1002/Nme.1253 |
0.702 |
|
2005 |
Dargush GF, Sant RS. Evolutionary aseismic design and retrofit of structures with passive energy dissipation Earthquake Engineering and Structural Dynamics. 34: 1601-1626. DOI: 10.1002/Eqe.497 |
0.732 |
|
2005 |
Grigoriev MM, Dargush GF. Efficiency of boundary element methods for time-dependent convective heat diffusion at high Peclet numbers Communications in Numerical Methods in Engineering. 21: 149-161. DOI: 10.1002/Cnm.734 |
0.727 |
|
2005 |
Grigoriev MM, Dargush GF. Developments of multi-level boundary element methods for steady heat diffusion problems 3rd M.I.T. Conference On Computational Fluid and Solid Mechanics. 1126-1132. |
0.708 |
|
2005 |
Barham W, Aref AJ, Dargush GF. A finite element based large increment method for nonlinear structural dynamic analysis Proceedings of the 10th International Conference On Civil, Structural and Environmental Engineering Computing, Civil-Comp 2005. |
0.343 |
|
2004 |
Grigoriev MM, Dargush GF. A time-space multi-level boundary element approach for time-dependent heat diffusion American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 375: 161-168. DOI: 10.1115/IMECE2004-60033 |
0.376 |
|
2004 |
Grigoriev MM, Dargush GF. A higher-order poly-region boundary element method for steady thermoviscous fluid flows American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 375: 155-160. DOI: 10.1115/IMECE2004-60022 |
0.43 |
|
2004 |
Dargush GF, Hadjesfandiari AR. Generalized stress intensity factors for strength analysis of Bi-material interfaces Mechanics of Advanced Materials and Structures. 11: 1-15. DOI: 10.1080/15376490490257675 |
0.467 |
|
2004 |
Grigoriev MM, Dargush GF. A multilevel boundary-element method for two-dimensional steady heat diffusion Numerical Heat Transfer, Part B: Fundamentals. 46: 329-356. DOI: 10.1080/10407790490475346 |
0.743 |
|
2004 |
Grigoriev MM, Dargush GF. Efficiency and accuracy of higher-order boundary-element methods for steady convective heat diffusion Numerical Heat Transfer, Part B: Fundamentals. 45: 109-133. DOI: 10.1080/10407790490253874 |
0.728 |
|
2004 |
Wang CH, Dargush GF, Soom A, Grigoriev MM. Multiscale thermomechanical analysis of sliding rings from short-time transients to steady-state Tribology Series. 43: 519-528. DOI: 10.1016/S0167-8922(03)80079-2 |
0.672 |
|
2004 |
Soom A, Serpe CI, Dargush GF. High frequency noise generation from components in sliding contact: Flutter instabilities including the role of surface roughness and friction Tribology Series. 43: 477-485. DOI: 10.1016/S0167-8922(03)80075-5 |
0.369 |
|
2004 |
Grigoriev MM, Dargush GF. Accuracy and efficiency of higher-order boundary element methods for steady convective heat diffusion in three-dimensions Engineering Analysis With Boundary Elements. 28: 1475-1491. DOI: 10.1016/J.Enganabound.2004.07.002 |
0.73 |
|
2004 |
Grigoriev MM, Dargush GF. A fast multi-level boundary element method for the Helmholtz equation Computer Methods in Applied Mechanics and Engineering. 193: 165-203. DOI: 10.1016/J.Cma.2003.09.004 |
0.727 |
|
2004 |
Dargush GF, Grigoriev MM. A fast multi-level boundary element algorithm for stokes flows in two-dimensions Proceedings of the Asme Heat Transfer/Fluids Engineering Summer Conference 2004, Ht/Fed 2004. 2: 663-674. |
0.711 |
|
2004 |
Grigoriev MM, Dargush GF. A Boundary element method for three-dimensional steady convective heat diffusion Proceedings of the Asme Heat Transfer/Fluids Engineering Summer Conference 2004, Ht/Fed 2004. 2: 681-690. |
0.435 |
|
2004 |
Wang CH, Grigoriev MM, Dargush GF. A fast time convolution algorithm for unsteady heat diffusion problems Proceedings of the Asme Heat Transfer/Fluids Engineering Summer Conference 2004, Ht/Fed 2004. 2: 641-651. |
0.664 |
|
2003 |
Grigoriev MM, Dargush GF. Boundary element methods for transient convective diffusion. Part III: Numerical examples Computer Methods in Applied Mechanics and Engineering. 192: 4313-4335. DOI: 10.1016/S0045-7825(03)00390-6 |
0.739 |
|
2003 |
Grigoriev MM, Dargush GF. Boundary element methods for transient convective diffusion. Part II: 2D implementation Computer Methods in Applied Mechanics and Engineering. 192: 4299-4312. DOI: 10.1016/S0045-7825(03)00389-X |
0.719 |
|
2003 |
Grigoriev MM, Dargush GF. Boundary element methods for transient convective diffusion. Part I: General formulation and 1D implementation Computer Methods in Applied Mechanics and Engineering. 192: 4281-4298. DOI: 10.1016/S0045-7825(03)00388-8 |
0.716 |
|
2003 |
Hadjesfandiari AR, Dargush GF. Boundary eigensolutions in elasticity II. Application to computational mechanics International Journal of Solids and Structures. 40: 1001-1031. DOI: 10.1016/S0020-7683(02)00586-3 |
0.54 |
|
2003 |
Grigoriev MM, Dargush GF. A fast multi-level multi-grid method for the Laplace equation Computational Fluid and Solid Mechanics 2003. 1973-1977. DOI: 10.1016/B978-008044046-0.50484-X |
0.429 |
|
2003 |
Dargush GF, Grigoriev MM. Boundary element methods for highly convective unsteady flows Computational Fluid and Solid Mechanics 2003. 882-885. DOI: 10.1016/B978-008044046-0.50216-5 |
0.389 |
|
2003 |
Hadjesfandiari AR, Dargush GF. Weighted traction boundary element methods for strength analysis of bi-materials Computational Fluid and Solid Mechanics 2003. 308-312. DOI: 10.1016/B978-008044046-0.50077-4 |
0.474 |
|
2003 |
Dargush GF, Grigoriev MM. Boundary element methods for unsteady convective heat diffusion 36th Aiaa Thermophysics Conference. |
0.41 |
|
2003 |
Grigoriev MM, Dargush GF. Efficient multi-grid method for the steady heat diffusion equation 36th Aiaa Thermophysics Conference. |
0.415 |
|
2003 |
Grigoriev MM, Dargush GF. A fast multi-level boundary element method for the steady heat diffusion equation Proceedings of the Asme Summer Heat Transfer Conference. 2003: 865-873. |
0.444 |
|
2003 |
Dargush GF, Grigoriev MM. Efficient boundary element methods for the time-dependent convective diffusion equation Proceedings of the Asme Summer Heat Transfer Conference. 2003: 875-886. |
0.411 |
|
2002 |
Stephenson MJ, Dargush GF. Development of a curvilinear viscoelastic constitutive relationship for time dependent materials. Part B: Example problems Polymer Engineering and Science. 42: 529-538. DOI: 10.1002/pen.10969 |
0.419 |
|
2002 |
Dargush GF, Grigoriev MM. Higher-order boundary element methods for transient diffusion problems. Part II: Singular flux formulation International Journal For Numerical Methods in Engineering. 55: 41-54. DOI: 10.1002/Nme.481 |
0.727 |
|
2002 |
Grigoriev MM, Dargush GF. Higher-order boundary element methods for transient diffusion problems. Part I: Bounded flux formulation International Journal For Numerical Methods in Engineering. 55: 1-40. DOI: 10.1002/nme.477 |
0.435 |
|
2001 |
Hadjesfandiari AR, Dargush GF. Theory of boundary eigensolutions in engineering mechanics Journal of Applied Mechanics, Transactions Asme. 68: 101-108. DOI: 10.1115/1.1331059 |
0.512 |
|
2001 |
Dargush GF, Soom A, Serpe CI. Thermomechanical finite element analysis to describe the engagement and wear of electromagnetic clutches Tribology Series. 39: 141-149. DOI: 10.1016/S0167-8922(01)80101-2 |
0.426 |
|
2001 |
Hadjesfandiari AR, Dargush GF. Boundary eigensolutions in elasticity. I. Theoretical development International Journal of Solids and Structures. 38: 6589-6625. DOI: 10.1016/S0020-7683(01)00028-2 |
0.528 |
|
2001 |
Hadjesfandiari AR, Dargush GF. Computational mechanics based on the theory of boundary eigensolutions International Journal For Numerical Methods in Engineering. 50: 325-346. DOI: 10.1002/1097-0207(20010120)50:2<325::Aid-Nme27>3.0.Co;2-0 |
0.538 |
|
2001 |
Dargush GF, Grigoriev MM. Higher-order boundary element methods for unsteady convective transport American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 369: 53-63. |
0.452 |
|
2000 |
Gupta H, Soong TT, Dargush GF. Active aerodynamic bi-directional control of structures II: : Tall buildings Engineering Structures. 22: 389-399. DOI: 10.1016/S0141-0296(98)00113-8 |
0.351 |
|
2000 |
Dargush GF, Grigoriev MM. Poly-region boundary element method for two-dimensional Boussinesq flows Computer Methods in Applied Mechanics and Engineering. 190: 1261-1287. DOI: 10.1016/S0045-7825(00)00162-6 |
0.735 |
|
1999 |
Grigoriev MM, Dargush GF. A poly-region boundary element method for incompressible viscous fluid flows International Journal For Numerical Methods in Engineering. 46: 1127-1158. DOI: 10.1002/(Sici)1097-0207(19991110)46:7<1127::Aid-Nme746>3.0.Co;2-G |
0.7 |
|
1999 |
Grigoriev MM, Dargush GF. Benchmark boundary element solutions for some problems governed by the Boussinesq equations American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 364: 331-336. |
0.431 |
|
1999 |
Stephenson MJ, Dargush GF, Ryan ME. Application of one-dimensional mechanical formulations to model the sagging behavior of a polymer sheet Polymer Engineering and Science. 39: 2199-2221. |
0.332 |
|
1996 |
Dargush GF, Chopra MB. Dynamic analysis of axisymmetric foundations on poroelastic media Journal of Engineering Mechanics. 122: 623-632. DOI: 10.1061/(Asce)0733-9399(1996)122:7(623) |
0.467 |
|
1995 |
Dargush GF, Soong TT. Behavior of Metallic Plate Dampers in Seismic Passive Energy Dissipation Systems Earthquake Spectra. 11: 545-568. DOI: 10.1193/1.1585827 |
0.332 |
|
1995 |
Stephenson DA, Barone MR, Dargush GF. Thermal expansion of the workpiece in turning Journal of Engineering For Industry. 117: 542-550. DOI: 10.1115/1.2803532 |
0.311 |
|
1995 |
Makris N, Dargush GF, Constantinou MC. Dynamic analysis of viscoelastic-fluid dampers Journal of Engineering Mechanics. 121: 1114-1121. DOI: 10.1061/(Asce)0733-9399(1995)121:10(1114) |
0.418 |
|
1995 |
Chen J, Dargush GF. Boundary element method for dynamic poroelastic and thermoelastic analyses International Journal of Solids and Structures. 32: 2257-2278. DOI: 10.1016/0020-7683(94)00227-N |
0.53 |
|
1995 |
Chopra MB, Dargush GF. Boundary element analysis of stresses in an axisymmetric soil mass undergoing consolidation International Journal For Numerical &Amp; Analytical Methods in Geomechanics. 19: 195-218. DOI: 10.1002/Nag.1610190304 |
0.47 |
|
1994 |
Chopra MB, Dargush GF. Development of bem for thermoplasticity International Journal of Solids and Structures. 31: 1635-1656. DOI: 10.1016/0020-7683(94)90212-7 |
0.503 |
|
1994 |
Makris N, Dargush GF, Constantinou MC. Dynamic analysis of generalized viscoelastic systems with the boundary element method International Conference On Computational Structures Technology - Proceedings. 283-290. |
0.323 |
|
1993 |
Makris N, Constantinou MC, Dargush GF. Analytical model of viscoelastic fluid dampers Journal of Structural Engineering (United States). 119: 3310-3325. DOI: 10.1061/(Asce)0733-9445(1993)119:11(3310) |
0.372 |
|
1993 |
Makris N, Dargush GF, Constantinou MC. Dynamic analysis of generalized viscoelastic fluids Journal of Engineering Mechanics. 119: 1663-1679. DOI: 10.1061/(Asce)0733-9399(1993)119:8(1663) |
0.401 |
|
1993 |
Chopra MB, Dargush GF. Thermal stress analysis of axisymmetric bodies via the boundary element method Computer Methods in Applied Mechanics and Engineering. 108: 53-71. DOI: 10.1016/0045-7825(93)90153-O |
0.5 |
|
1993 |
Raveendra ST, Banerjee PK, Dargush GF. Three-dimensional analysis of thermally loaded cracks International Journal For Numerical Methods in Engineering. 36: 1909-1926. DOI: 10.1002/Nme.1620361108 |
0.608 |
|
1993 |
Dargush GF, Raveendra ST, Banerjee PK. Boundary element formulations for structural acoustics including mean flow effects American Society of Mechanical Engineers, Applied Mechanics Division, Amd. 178: 39-50. |
0.459 |
|
1992 |
Dargush GF, Banerjee PK. Time dependent axisymmetric thermoelastic boundary element analysis International Journal For Numerical Methods in Engineering. 33: 695-717. DOI: 10.1002/Nme.1620330403 |
0.67 |
|
1992 |
Chopra MB, Dargush GF. Finite-element analysis of time-dependent large-deformation problems International Journal For Numerical &Amp; Analytical Methods in Geomechanics. 16: 101-130. DOI: 10.1002/Nag.1610160203 |
0.446 |
|
1991 |
Dargush GF, Banerjee PK. A New Boundary Element Method for Three-Dimensional Coupled Problems of Consolidation and Thermoelasticity Journal of Applied Mechanics. 58: 28-36. DOI: 10.1115/1.2897169 |
0.677 |
|
1991 |
Dargush GF, Banerjee PK. Boundary element methods for three-dimensional thermoplasticity International Journal of Solids and Structures. 28: 549-565. DOI: 10.1016/0020-7683(91)90171-B |
0.68 |
|
1991 |
Dargush GF, Banerjee PK. A boundary element method for axisymmetric soil consolidation International Journal of Solids and Structures. 28: 897-915. DOI: 10.1016/0020-7683(91)90007-3 |
0.677 |
|
1991 |
Israil ASM, Dargush GF. Dynamic fracture mechanics studies by time-domain BEM Engineering Fracture Mechanics. 39: 315-328. DOI: 10.1016/0013-7944(91)90046-4 |
0.46 |
|
1991 |
Dargush GF, Banerjee PK. Time-dependent incompressible viscous bem for moderate Reynolds numbers International Journal For Numerical Methods in Engineering. 31: 1627-1648. DOI: 10.1002/Nme.1620310812 |
0.642 |
|
1991 |
Dargush GF, Banerjee PK. Boundary element method for steady incompressible thermoviscous flow International Journal For Numerical Methods in Engineering. 31: 1605-1626. DOI: 10.1002/Nme.1620310811 |
0.662 |
|
1991 |
Dargush GF, Banerjee PK. Application of the boundary element method to transient heat conduction International Journal For Numerical Methods in Engineering. 31: 1231-1247. DOI: 10.1002/Nme.1620310613 |
0.67 |
|
1991 |
Dibble MF, Dargush GF, Banerjee PK. Borehole mining. Improved technology expands horizon consolidation and thermoelasticity Journal of Applied Mechanics, Transactions Asme. 58: 28-36. |
0.32 |
|
1990 |
Dargush GF, Banerjee PK. Boundary element methods in three-dimensional thermoelasticity International Journal of Solids and Structures. 26: 199-216. DOI: 10.1016/0020-7683(90)90052-W |
0.683 |
|
1989 |
Dargush GF, Banerjee PK. Development of an integrated BEM for hot fluid-structure interaction Proceedings of the Asme Turbo Expo. 5. DOI: 10.1115/1.2906170 |
0.664 |
|
1989 |
Dargush GF, Banerjee PK. Development of a boundary element method for time-dependent planar thermoelasticity International Journal of Solids and Structures. 25: 999-1021. DOI: 10.1016/0020-7683(89)90018-8 |
0.691 |
|
1989 |
Dargush GF, Banerjee PK. Time domain boundary element method for poroelasticity International Journal For Numerical Methods in Engineering. 28: 2423-2449. DOI: 10.1002/Nme.1620281014 |
0.662 |
|
1989 |
Dargush GF, Banerjee PK. Advanced development of the boundary element method for steady-state heat conduction International Journal For Numerical Methods in Engineering. 28: 2123-2142. DOI: 10.1002/Nme.1620280910 |
0.651 |
|
Low-probability matches (unlikely to be authored by this person) |
2014 |
Seo J, Lee GC, Liang Z, Dargush GF. Configuration and size effects on bond stress-slip and failure modes of RC connections Journal of Engineering Mechanics. 140. DOI: 10.1061/(Asce)Em.1943-7889.0000790 |
0.298 |
|
2006 |
Escobar-Sandoval ED, Whittaker AS, Dargush GF. Concentrically loaded circular steel plates bearing on plain concrete Journal of Structural Engineering. 132: 1784-1792. DOI: 10.1061/(Asce)0733-9445(2006)132:11(1784) |
0.297 |
|
2006 |
Wang Y, Dargush GF. Efficient analysis and evolutionary optimization of passive control system for building structures 8th Us National Conference On Earthquake Engineering 2006. 8: 4748-4757. |
0.294 |
|
2015 |
Wetherhold RC, Dargush GF. Improvement of adhesive strength at a bi-material interface by adjusting the interface angles at the free edge Theoretical and Applied Fracture Mechanics. 77: 69-73. DOI: 10.1016/J.Tafmec.2015.02.002 |
0.294 |
|
2002 |
Stephenson MJ, Dargush GF. Development of a curvilinear viscoelastic constitutive relationship for time dependent materials. Part A: Theoretical discussion Polymer Engineering and Science. 42: 519-528. DOI: 10.1002/pen.10968 |
0.292 |
|
2012 |
Kim DK, Shin SW, Dargush GF. Damage progress of structural steel under cyclic loading using an elastoplastic damage model Advanced Science Letters. 8: 638-642. DOI: 10.1166/Asl.2012.2409 |
0.288 |
|
2000 |
Gupta H, Soong TT, Dargush GF. Active aerodynamic bidirectional control of structures I: modeling and experiments Engineering Structures. 22: 379-388. DOI: 10.1016/S0141-0296(98)00112-6 |
0.288 |
|
2006 |
Xu X, Singh T, Dargush GF. Cubic control for phase I smart base-isolated benchmark building with emphasis on nonstructural performance Structural Control and Health Monitoring. 13: 758-774. DOI: 10.1002/Stc.110 |
0.277 |
|
2014 |
Rafiee-Dehkharghani R, Aref AJ, Dargush GF. Characterization of multilayered stress wave attenuators subjected to impulsive transient loadings Journal of Engineering Mechanics. 141. DOI: 10.1061/(Asce)Em.1943-7889.0000859 |
0.27 |
|
1994 |
Chopra MB, Dargush GF. Application of the BEM to problems of elastoplasticity and nonlinear soil consolidation International Conference On Boundary Element Technology. 189-196. |
0.257 |
|
2014 |
Campillo-Funollet M, Dargush GF, VanSlooten RA, Mollendorf JC, Kim H, Makowka SR. Size-dependent strength of dental adhesive systems. Dental Materials : Official Publication of the Academy of Dental Materials. 30: e216-28. PMID 24786647 DOI: 10.1016/J.Dental.2014.03.010 |
0.254 |
|
2013 |
Nasiri P, Dargush GF. Maximizing strength of bimaterial interfaces Asme International Mechanical Engineering Congress and Exposition, Proceedings (Imece). 9. DOI: 10.1115/IMECE2013-65388 |
0.253 |
|
1982 |
Drury CG, Brodsky K, Dargush G. Analysis of glass breakage in window accidents Accident Analysis and Prevention. 14: 443-456. DOI: 10.1016/0001-4575(82)90058-6 |
0.249 |
|
2004 |
Wang CH, Soom A, Dargush GF. Transient thermoelastic contact of sliding rings with axisymmetric surface roughness Journal of Tribology. 126: 217-224. DOI: 10.1115/1.1645871 |
0.238 |
|
2003 |
Soom A, Serpe CI, Dargush GF. Understanding the effects of friction and surface roughness on noise generation from elastic components in sliding contact Contact Mechanics - Friction: Modeling and Experiment. 31-33. |
0.234 |
|
2012 |
Maneshi MM, Rezaei-Bazkiaei A, Weber AS, Dargush GF. A numerical investigation of impact of architectural and climatic parameters of windcatcher systems on induced ventilation Asme International Mechanical Engineering Congress and Exposition, Proceedings (Imece). 6: 1103-1117. DOI: 10.1115/IMECE2012-87139 |
0.213 |
|
1991 |
Banerjee PK, Henry DP, Dargush GF. Micromechanical studies of composites by BEM American Society of Mechanical Engineers (Publication) Nde. 10: 221-228. |
0.212 |
|
2012 |
Rezaei-Bazkiaei A, Dehghan-Niri E, Kolahdouz EM, Dargush GF, Weber AS. A new control strategy to improve the ground source heat pump's efficiency with a recycled product Asme International Mechanical Engineering Congress and Exposition, Proceedings (Imece). 10: 225-234. DOI: 10.1115/IMECE2012-93086 |
0.199 |
|
2010 |
Kim D, Dargush GF, Basaran C. A thermoplastic damage model for metallic energy dissipation devices 9th Us National and 10th Canadian Conference On Earthquake Engineering 2010, Including Papers From the 4th International Tsunami Symposium. 6: 4245-4254. |
0.199 |
|
2006 |
Xu X, Dargush GF, Singh T. Cubic nonlinear structural control with emphasis on non-structural performance 8th Us National Conference On Earthquake Engineering 2006. 11: 6708-6717. |
0.175 |
|
2006 |
Dargush GF, Hu Y. Evolutionary methodologies for aseismic decision support 8th Us National Conference On Earthquake Engineering 2006. 10: 6200-6209. |
0.171 |
|
2021 |
Abdehkakha A, Hammond AL, Patel TR, Siddiqui AH, Dargush GF, Meng H. Cerebral aneurysm flow diverter modeled as a thin inhomogeneous porous medium in hemodynamic simulations. Computers in Biology and Medicine. 139: 104988. PMID 34717230 DOI: 10.1016/j.compbiomed.2021.104988 |
0.161 |
|
2013 |
Kim D, Dargush GF. A Rate Dependent Plasticity Model under Cyclic Loading of Metals Journal of the Korean Society For Advanced Composite Structures. 4: 25-32. DOI: 10.11004/kosacs.2013.4.1.025 |
0.059 |
|
Hide low-probability matches. |