Year |
Citation |
Score |
2019 |
Foley KA, Shambaugh RL. Fiber spinning with airfields enhanced by airfoil louvers Textile Research Journal. 89: 3150-3158. DOI: 10.1177/0040517518807444 |
0.648 |
|
2015 |
Shambaugh RL, Krutty JD, Singleton SM. Melt Blowing Dies with Louvers Industrial and Engineering Chemistry Research. 54: 12999-13004. DOI: 10.1021/Acs.Iecr.5B03400 |
0.5 |
|
2012 |
Shambaugh BR, Papavassiliou DV, Shambaugh RL. Modifying air fields to improve melt blowing Industrial and Engineering Chemistry Research. 51: 3472-3482. DOI: 10.1021/Ie202501U |
0.499 |
|
2011 |
Vangordon SB, Voronov RS, Blue TB, Shambaugh RL, Papavassiliou DV, Sikavitsas VI. Effects of scaffold architecture on preosteoblastic cultures under continuous fluid shear Industrial and Engineering Chemistry Research. 50: 620-629. DOI: 10.1021/Ie902041V |
0.333 |
|
2011 |
Shambaugh BR, Papavassiliou DV, Shambaugh RL. Next-generation modeling of melt blowing Industrial and Engineering Chemistry Research. 50: 12233-12245. DOI: 10.1021/Ie200836A |
0.558 |
|
2009 |
Marla VT, Shambaugh RL, Papavassiliou DV. Online measurement of fiber diameter and temperature in the melt-spinning and melt-blowing processes Industrial and Engineering Chemistry Research. 48: 8736-8744. DOI: 10.1021/Ie900615N |
0.649 |
|
2009 |
Marla VT, Shambaugh RL, Papavassiliou DV. Unsteady state heat transfer from cylinders to air in normal and parallel flow Industrial and Engineering Chemistry Research. 48: 4119-4126. DOI: 10.1021/Ie800946A |
0.41 |
|
2009 |
Shambaugh BR, Marla VT, Papavassiliou DV, Shambaugh RL. On-line measurement of fiber diameter and temperature in the melt spinning and melt blowing processes Inda Association of the Nonwoven Fabrics Industry - Inda/Tappi International Nonwovens Technical Conference 2009, Intc 2009. 2: 1034-1090. |
0.573 |
|
2008 |
Krutka HM, Shambaugh RL, Papavassiliou DV. Effects of the polymer fiber on the flow field from a slot melt blowing die Industrial and Engineering Chemistry Research. 47: 935-945. DOI: 10.1021/Ie070871I |
0.599 |
|
2008 |
Beard JH, Shambaugh RL, Papavassiliou DV, Shambaugh BR. On-line measurement of fiber motion during melt blowing Inda Association of the Nonwoven Fabrics Industry - International Nonwovens Technical Conference, Intc 2008. 249-275. |
0.48 |
|
2007 |
Alvarez-Barreto JF, Linehan SM, Shambaugh RL, Sikavitsas VI. Flow perfusion improves seeding of tissue engineering scaffolds with different architectures. Annals of Biomedical Engineering. 35: 429-42. PMID 17216348 DOI: 10.1007/S10439-006-9244-Z |
0.331 |
|
2007 |
Shambaugh RL, Ortiz DL. Characterization of Fibers Produced from Blends of Polybutylene and Polypropylene Journal of Engineered Fibers and Fabrics. 2: 155892500700200. DOI: 10.1177/155892500700200303 |
0.596 |
|
2007 |
Beard JH, Shambaugh RL, Shambaugh BR, Schmidtke DW. On-line measurement of fiber-motion during melt blowing Industrial and Engineering Chemistry Research. 46: 7340-7352. DOI: 10.1021/Ie070588J |
0.556 |
|
2007 |
Krutka HM, Shambaugh RL, Papavassiliou DV. Effects of the polymer fiber on the flow field from an annular melt-blowing die Industrial and Engineering Chemistry Research. 46: 655-666. DOI: 10.1021/ie061021q |
0.456 |
|
2007 |
Marla VT, Shambaugh RL, Papavassiliou DV. Use of an infrared camera for accurate determination of the temperature of polymer filaments Industrial and Engineering Chemistry Research. 46: 336-344. DOI: 10.1021/Ie060703A |
0.458 |
|
2006 |
Krutka HM, Shambaugh RL, Papavassiliou DV. Analysis of the temperature field from multiple jets in the Schwarz melt blowing die using computational fluid dynamics Industrial and Engineering Chemistry Research. 45: 5098-5109. DOI: 10.1021/Ie060194C |
0.453 |
|
2006 |
Maria VT, Shambaugh RL, Papavassiliou DV. Modeling the melt blowing of hollow fibers Industrial and Engineering Chemistry Research. 45: 407-415. DOI: 10.1021/Ie058047M |
0.557 |
|
2006 |
Marla VT, Shambaugh RL, Papavassiliou DV. Using swirl dies to spin solid and hollow fibers Industrial and Engineering Chemistry Research. 45: 2331-2340. DOI: 10.1021/Ie051231N |
0.638 |
|
2006 |
Krutka HM, Shambaugh RL, Papavassiliou DV. Velocity and temperature fields from multiple row melt blowing dies International Nonwovens Technical Conference, Intc 2006. 492-500. |
0.419 |
|
2005 |
Krutka HM, Shambaugh RL, Papavassiliou DV. Analysis of multiple jets in the schwarz melt-blowing die using computational fluid dynamics Industrial and Engineering Chemistry Research. 44: 8922-8932. DOI: 10.1021/ie0505864 |
0.301 |
|
2004 |
Tate BD, Shambaugh RL. Temperature fields below melt-blowing dies of various geometries Industrial and Engineering Chemistry Research. 43: 5405-5410. DOI: 10.1021/Ie040066T |
0.441 |
|
2004 |
Marla VT, Shambaugh RL. Modeling of the melt blowing performance of slot dies Industrial and Engineering Chemistry Research. 43: 2789-2797. DOI: 10.1021/Ie030767A |
0.581 |
|
2004 |
Moore EM, Shambaugh RL, Papavassiliou DV. Analysis of isothermal annular jets: Comparison of computational fluid dynamics and experimental data Journal of Applied Polymer Science. 94: 909-922. DOI: 10.1002/App.20963 |
0.316 |
|
2004 |
Moore EM, Ortiz DL, Marla VT, Shambaugh RL, Grady BP. Enhancing the strength of polypropylene fibers with carbon nanotubes Journal of Applied Polymer Science. 93: 2926-2933. DOI: 10.1002/App.20703 |
0.549 |
|
2003 |
Marla VT, Shambaugh RL. Three-Dimensional Model of the Melt-Blowing Process Industrial and Engineering Chemistry Research. 42: 6993-7005. DOI: 10.1021/Ie030517U |
0.43 |
|
2002 |
Krutka HM, Shambaugh RL, Papavassiliou DV. Analysis of a melt-blowing die: Comparison of CFD and experiments Industrial and Engineering Chemistry Research. 41: 5125-5138. DOI: 10.1021/Ie020366F |
0.387 |
|
2002 |
Kearns JC, Shambaugh RL. Polypropylene fibers reinforced with carbon nanotubes Journal of Applied Polymer Science. 86: 2079-2084. DOI: 10.1002/App.11160 |
0.577 |
|
2002 |
De Rovere A, Grady BP, Shambaugh RL. The influence of processing parameters on the properties of melt-spun polypropylene hollow fibers Journal of Applied Polymer Science. 83: 1759-1772. DOI: 10.1002/App.10128 |
0.486 |
|
2001 |
De Rovère A, Shambaugh RL. Melt-spun hollow fibers for use in nonwoven structures Industrial and Engineering Chemistry Research. 40: 176-187. DOI: 10.1021/Ie000503D |
0.643 |
|
2001 |
De Rovère A, Shambaugh RL. Melt-spun hollow fibers: Modeling and experiments Polymer Engineering and Science. 41: 1206-1219. DOI: 10.1002/Pen.10822 |
0.624 |
|
2000 |
De Rovère A, Shambaugh RL, O'Rear EA. Investigation of gravity-spun, melt-spun, and melt-blown polypropylene fibers using atomic force microscopy Journal of Applied Polymer Science. 77: 1921-1937. DOI: 10.1002/1097-4628(20000829)77:9<1921::Aid-App8>3.0.Co;2-1 |
0.579 |
|
1998 |
Tate BD, Shambaugh RL. Modified dual rectangular jets for fiber production Industrial and Engineering Chemistry Research. 37: 3772-3779. DOI: 10.1021/Ie980219A |
0.346 |
|
1998 |
Bansal V, Shambaugh RL. On-line determination of diameter and temperature during melt blowing of polypropylene Industrial and Engineering Chemistry Research. 37: 1799-1806. DOI: 10.1021/Ie9709042 |
0.448 |
|
1998 |
Kelley SL, Shambaugh RL. Sheath-core differences caused by rapid thermoxidation during melt blowing of fibers Industrial & Engineering Chemistry Research. 37: 1140-1153. DOI: 10.1021/Ie970549F |
0.522 |
|
1998 |
Bansal V, Shambaugh RL. On-line density and crystallinity of polyethylene terephthalate during melt spinning Polymer Engineering and Science. 38: 1959-1968. DOI: 10.1002/Pen.10365 |
0.652 |
|
1998 |
Shambaugh RL, Chhabra R. Fiber vibrations and distributions in melt blowing Tappi Journal. 81: 199-201. |
0.509 |
|
1997 |
Harpham AS, Shambaugh RL. Velocity and Temperature Fields of Dual Rectangular Jets Industrial and Engineering Chemistry Research. 36: 3937-3943. DOI: 10.1021/Ie970145N |
0.303 |
|
1997 |
Shambaugh RL. Modeling of the next generation of melt blowing Tappi Journal. 80: 163-166. |
0.33 |
|
1996 |
Chhabra R, Shambaugh RL. Experimental measurements of fiber threadline vibrations in the melt-blowing process Industrial and Engineering Chemistry Research. 35: 4366-4374. DOI: 10.1021/Ie960309K |
0.62 |
|
1996 |
Harpham AS, Shambaugh RL. Flow field of practical dual rectangular jets Industrial and Engineering Chemistry Research. 35: 3776-3781. DOI: 10.1021/Ie960074C |
0.314 |
|
1996 |
Bansal V, Shambaugh RL. On-line determination of density and crystallinity during melt spinning Polymer Engineering and Science. 36: 2785-2798. DOI: 10.1002/Pen.10679 |
0.617 |
|
1995 |
Tyagi MK, Shambaugh RL. Use of oscillating gas jets in fiber processing Industrial and Engineering Chemistry Research. 34: 656-660. DOI: 10.1021/Ie00041A027 |
0.465 |
|
1994 |
Mohammed A, Shambaugh RL. Three-dimensional temperature field of a rectangular array of practical air jets Industrial &Amp; Engineering Chemistry Research. 33: 730-735. DOI: 10.1021/Ie00027A036 |
0.364 |
|
1994 |
Ju YD, Shambaugh RL. Air drag on fine filaments at oblique and normal angles to the air stream Polymer Engineering and Science. 34: 958-964. DOI: 10.1002/Pen.760341203 |
0.518 |
|
1993 |
Rao RS, Shambaugh RL. Vibration and stability in the melt blowing process Industrial and Engineering Chemistry Research. 32: 3100-3111. DOI: 10.1021/Ie00024A020 |
0.493 |
|
1992 |
Wu TT, Shambaugh RL. Characterization of the melt blowing process with laser Doppler velocimetry Industrial &Amp; Engineering Chemistry Research. 31: 379-389. DOI: 10.1021/Ie00001A052 |
0.558 |
|
1991 |
Majumdar B, Shambaugh RL. Velocity and temperature fields of annular jets Industrial & Engineering Chemistry Research. 30: 1300-1306. DOI: 10.1021/Ie00054A034 |
0.321 |
|
1991 |
Kayser JC, Shambaugh RL. Discharge coefficients for compressible flow through small-diameter orifices and convergent nozzles Chemical Engineering Science. 46: 1697-1711. DOI: 10.1016/0009-2509(91)87017-7 |
0.3 |
|
1990 |
Majumdar B, Shambaugh RL. Air drag on filaments in the melt blowing process Journal of Rheology. 34: 591-601. DOI: 10.1122/1.550097 |
0.347 |
|
1990 |
Kayser JC, Shambaugh RL. The manufacture of continuous polymeric filaments by the melt‐blowing process Polymer Engineering and Science. 30: 1237-1251. DOI: 10.1002/Pen.760301908 |
0.522 |
|
1989 |
Uyttendaele MAJ, Shambaugh RL. The flow field of annular jets at moderate reynolds numbers Industrial and Engineering Chemistry Research®. 28: 1735-1740. DOI: 10.1021/Ie00095A027 |
0.313 |
|
1988 |
Shambaugh RL. A macroscopic view of the melt-blowing process for producing microfibers Industrials and Engineering Chemistry Research®. 27: 2363-2372. DOI: 10.1021/Ie00084A021 |
0.558 |
|
Show low-probability matches. |