Year |
Citation |
Score |
2019 |
Rashidi S, Choi JP, Stevenson JW, Pandey A, Gupta RK. Effect of Aluminizing on the High-Temperature Oxidation Behavior of an Alumina-Forming Austenitic Stainless Steel Jom. 71: 109-115. DOI: 10.1007/S11837-018-3155-Y |
0.346 |
|
2018 |
Müller BR, Cooper RC, Lange A, Kupsch A, Wheeler M, Hentschel MP, Staude A, Pandey A, Shyam A, Bruno G. Stress-induced microcrack density evolution in β-eucryptite ceramics: Experimental observations and possible route to strain hardening Acta Materialia. 144: 627-641. DOI: 10.1016/J.Actamat.2017.10.030 |
0.429 |
|
2018 |
Aphale AN, Hu B, Reisert M, Pandey A, Singh P. Oxidation Behavior and Chromium Evaporation From Fe and Ni Base Alloys Under SOFC Systems Operation Conditions Jom. 71: 116-123. DOI: 10.1007/S11837-018-3188-2 |
0.317 |
|
2017 |
Cooper RC, Bruno G, Wheeler MR, Pandey A, Watkins TR, Shyam A. Effect of microcracking on the uniaxial tensile response of β-eucryptite ceramics: Experiments and constitutive model Acta Materialia. 135: 361-371. DOI: 10.1016/J.Actamat.2017.06.033 |
0.421 |
|
2016 |
Pandey A, Wheeler R, Shyam A, Stoughton TB. Erratum to: Onset of Plasticity via Relaxation Analysis (OPRA) Experimental Mechanics. 56: 1109-1109. DOI: 10.1007/S11340-016-0166-X |
0.309 |
|
2016 |
Pandey A, Wheeler R, Shyam A, Stoughton TB. Onset of Plasticity via Relaxation Analysis (OPRA) Experimental Mechanics. 1-13. DOI: 10.1007/S11340-016-0152-3 |
0.462 |
|
2015 |
Pandey A, Kabirian F, Hwang J, Choi S, Khan AS. Mechanical responses and deformation mechanisms of an AZ31 Mg alloy sheet under dynamic and simple shear deformations International Journal of Plasticity. 68: 111-131. DOI: 10.1016/J.Ijplas.2014.12.001 |
0.658 |
|
2015 |
Boegelein T, Dryepondt SN, Pandey A, Dawson K, Tatlock GJ. Mechanical response and deformation mechanisms of ferritic oxide dispersion strengthened steel structures produced by selective laser melting Acta Materialia. 87: 201-215. DOI: 10.1016/J.Actamat.2014.12.047 |
0.385 |
|
2015 |
Pandey A. In Situ Mechanical Testing in Electron Microscopes: Current Progress and Future Opportunities in Small-Scale Experimentation Jom. 67: 1682-1683. DOI: 10.1007/S11837-015-1513-6 |
0.346 |
|
2015 |
Pandey A, Hemker KJ. Temperature Dependence of the Anisotropy and Creep in a Single-Crystal Nickel Superalloy Jom. 67: 1617-1623. DOI: 10.1007/S11837-015-1414-8 |
0.396 |
|
2015 |
Wheeler R, Pandey A, Shyam A, Tan T, Lara-Curzio E. Small Scale Mechanical Characterization of Thin Foil Materials via Pin Load Microtesting Experimental Mechanics. 55: 1375-1387. DOI: 10.1007/S11340-015-0020-6 |
0.396 |
|
2014 |
Pandey A, Shyam A, Watkins TR, Lara-Curzio E, Stafford RJ, Hemker KJ. The uniaxial tensile response of porous and microcracked ceramic materials Journal of the American Ceramic Society. 97: 899-906. DOI: 10.1111/Jace.12720 |
0.423 |
|
2014 |
Kabirian F, Khan AS, Pandey A. Negative to positive strain rate sensitivity in 5xxx series aluminum alloys: Experiment and constitutive modeling International Journal of Plasticity. 55: 232-246. DOI: 10.1016/J.Ijplas.2013.11.001 |
0.631 |
|
2013 |
Pandey A, Khan AS, Kim E, Choi S, Gnäupel-Herold T. Experimental and numerical investigations of yield surface, texture, and deformation mechanisms in AA5754 over low to high temperatures and strain rates International Journal of Plasticity. 41: 165-188. DOI: 10.1016/J.Ijplas.2012.09.006 |
0.663 |
|
2013 |
Pandey A, Tolpygo VK, Hemker KJ. Thermomechanical behavior of developmental thermal barrier coating bond coats Jom. 65: 542-549. DOI: 10.1007/S11837-013-0551-1 |
0.356 |
|
2012 |
Shyam A, Lara-Curzio E, Pandey A, Watkins TR, More KL. The thermal expansion, elastic and fracture properties of porous cordierite at elevated temperatures Journal of the American Ceramic Society. 95: 1682-1691. DOI: 10.1111/J.1551-2916.2012.05125.X |
0.31 |
|
2011 |
Khan AS, Pandey A, Gnäupel-Herold T, Mishra RK. Mechanical response and texture evolution of AZ31 alloy at large strains for different strain rates and temperatures International Journal of Plasticity. 27: 688-706. DOI: 10.1016/J.Ijplas.2010.08.009 |
0.654 |
|
2010 |
Khan AS, Pandey A, Stoughton T. Evolution of subsequent yield surfaces and elastic constants with finite plastic deformation. Part II: A very high work hardening aluminum alloy (annealed 1100 Al) International Journal of Plasticity. 26: 1421-1431. DOI: 10.1016/J.Ijplas.2009.07.008 |
0.657 |
|
2010 |
Khan AS, Pandey A, Stoughton T. Evolution of subsequent yield surfaces and elastic constants with finite plastic deformation. Part III: Yield surface in tension–tension stress space (Al 6061–T 6511 and annealed 1100 Al) International Journal of Plasticity. 26: 1432-1441. DOI: 10.1016/J.Ijplas.2009.07.007 |
0.636 |
|
2009 |
Khan AS, Kazmi R, Pandey A, Stoughton T. Evolution of subsequent yield surfaces and elastic constants with finite plastic deformation. Part-I: A very low work hardening aluminum alloy (Al6061-T6511) International Journal of Plasticity. 25: 1611-1625. DOI: 10.1016/J.Ijplas.2008.07.003 |
0.658 |
|
Show low-probability matches. |