Year |
Citation |
Score |
2020 |
Lai Z, Tao W, Leu MC, Yin Z. Smart augmented reality instructional system for mechanical assembly towards worker-centered intelligent manufacturing Journal of Manufacturing Systems. 55: 69-81. DOI: 10.1016/J.Jmsy.2020.02.010 |
0.346 |
|
2018 |
Hu L, Nguyen N, Tao W, Leu MC, Liu XF, Shahriar MR, Al Sunny SMN. Modeling of Cloud-Based Digital Twins for Smart Manufacturing with MT Connect Procedia Manufacturing. 26: 1193-1203. DOI: 10.1016/J.Promfg.2018.07.155 |
0.389 |
|
2017 |
Motaparti KP, Taylor G, Leu MC, Chandrashekhara K, Castle J, Matlack M. Experimental investigation of effects of build parameters on flexural properties in fused deposition modelling parts Virtual and Physical Prototyping. 12: 207-220. DOI: 10.1080/17452759.2017.1314117 |
0.315 |
|
2017 |
Liu XF, Shahriar MR, Al Sunny SN, Leu MC, Hu L. Cyber-physical manufacturing cloud: Architecture, virtualization, communication, and testbed Journal of Manufacturing Systems. 43: 352-364. DOI: 10.1016/J.Jmsy.2017.04.004 |
0.374 |
|
2016 |
Li M, Ghazanfari A, Li W, Landers RG, Leu MC. Modeling and analysis of paste freezing in freeze-form extrusion fabrication of thin-wall parts via a lumped method Journal of Materials Processing Technology. 237: 163-180. DOI: 10.1016/J.Jmatprotec.2016.05.027 |
0.327 |
|
2015 |
Puthenveetil SC, Daphalapurkar CP, Zhu W, Leu MC, Liu XF, Gilpin-Mcminn JK, Snodgrass SD. Computer-automated ergonomic analysis based on motion capture and assembly simulation Virtual Reality. 19: 119-128. DOI: 10.1007/S10055-015-0261-9 |
0.353 |
|
2014 |
Li M, Landers RG, Leu MC. Modeling, Analysis, and Simulation of Paste Freezing in Freeze-Form Extrusion Fabrication of Thin-Wall Parts Journal of Manufacturing Science and Engineering, Transactions of the Asme. 136. DOI: 10.1115/1.4028577 |
0.315 |
|
2013 |
Leu MC, Garcia DA. Development of Freeze-form Extrusion Fabrication with use of sacrificial material 24th International Sff Symposium - An Additive Manufacturing Conference, Sff 2013. 326-345. DOI: 10.1115/1.4028542 |
0.333 |
|
2013 |
Zhu W, Vader AM, Chadda A, Leu MC, Liu XF, Vance JB. Wii remote-based low-cost motion capture for automated assembly simulation Virtual Reality. 17: 125-136. DOI: 10.1007/S10055-011-0204-Z |
0.326 |
|
2012 |
Leu MC, Deuser BK, Tang L, Landers RG, Hilmas GE, Watts JL. Freeze-form extrusion fabrication of functionally graded materials Cirp Annals - Manufacturing Technology. 61: 223-226. DOI: 10.1016/J.Cirp.2012.03.050 |
0.318 |
|
2011 |
Joshi A, Leu MC, Murray SL. Fastening ergonomics study based on state-space modelling of hand-arm system International Journal of Human Factors Modelling and Simulation. 2: 26. DOI: 10.1504/Ijhfms.2011.041636 |
0.31 |
|
2009 |
Huang T, Mason MS, Zhao X, Hilmas GE, Leu MC. Aqueous‐based freeze‐form extrusion fabrication of alumina components Rapid Prototyping Journal. 15: 88-95. DOI: 10.1108/13552540910943388 |
0.332 |
|
2009 |
Mason MS, Huang T, Landers RG, Leu MC, Hilmas GE. Aqueous-based extrusion of high solids loading ceramic pastes: Process modeling and control Journal of Materials Processing Technology. 209: 2946-2957. DOI: 10.1016/J.Jmatprotec.2008.07.004 |
0.326 |
|
2009 |
Zhang W, Leu MC. A spatial warping method for freeform modeling based on a level-set method Cad Computer Aided Design. 41: 765-771. DOI: 10.1016/J.Cad.2009.04.013 |
0.327 |
|
2008 |
Niu Q, Chi X, Leu MC, Ochoa J. Image processing, geometric modeling and data management for development of a virtual bone surgery system. Computer Aided Surgery : Official Journal of the International Society For Computer Aided Surgery. 13: 30-40. PMID 18240053 DOI: 10.3109/10929080701882598 |
0.307 |
|
2008 |
Joshi A, Guttenberg R, Leu M, Murray S. Modeling of the hand–arm system for impact loading in shear fastener installation International Journal of Industrial Ergonomics. 38: 715-725. DOI: 10.1016/J.Ergon.2007.10.012 |
0.346 |
|
2007 |
Zhang W, Peng X, Leu MC, Zhang W. A Novel Contour Generation Algorithm for Surface Reconstruction From Dexel Data Journal of Computing and Information Science in Engineering. 7: 203-210. DOI: 10.1115/1.2752817 |
0.352 |
|
2006 |
Bajaj G, Saygin C, Grasman SE, Leu MC. Performance evaluation of an auction-based job allocation model for small- And medium-sized enterprises International Journal of Networking and Virtual Organisations. 3: 202-219. DOI: 10.1504/Ijnvo.2006.009535 |
0.31 |
|
2006 |
Huang T, Mason MS, Hilmas GE, Leu MC. Freeze-form extrusion fabrication of ceramic parts Virtual and Physical Prototyping. 1: 93-100. DOI: 10.1080/17452750600649609 |
0.313 |
|
2005 |
Leu MC, Peng X, Zhang W. Surface reconstruction for interactive modeling of freeform solids by virtual sculpting Cirp Annals - Manufacturing Technology. 54: 131-134. DOI: 10.1016/S0007-8506(07)60066-3 |
0.316 |
|
2001 |
Leu MC, Maiteh BY, Blackmore D, Fu L. Creation of freeform solid models in virtual reality Cirp Annals - Manufacturing Technology. 50: 73-76. DOI: 10.1016/S0007-8506(07)62074-5 |
0.646 |
|
1999 |
Maiteh BY, Blackmore D, Abdel-Malek L, Leu MC. Swept-Volume Computation for Machining Simulation and Virtual Reality Application Journal of Materials Processing & Manufacturing Science. 7: 380-390. DOI: 10.1106/Nqb5-K0Gq-Tu5D-95Aa |
0.631 |
|
1998 |
Fan K, Leu MC. Intelligent planning of CAD-directed inspection for coordinate measuring machines Computer Integrated Manufacturing Systems. 11: 43-51. DOI: 10.1016/S0951-5240(98)00008-1 |
0.36 |
|
1998 |
Leu MC, Lu F, Blackmore D. Simulation of NC machining with cutter deflection by modelling deformed swept volumes Cirp Annals - Manufacturing Technology. 47: 441-445. DOI: 10.1016/S0007-8506(07)62870-4 |
0.309 |
|
1997 |
Leu MC, Wang L, Blackmore D. A verification program for 5-axis NC machining with general APT tools Cirp Annals - Manufacturing Technology. 46: 419-X88. DOI: 10.1016/S0007-8506(07)60856-7 |
0.344 |
|
1992 |
Pai DK, Leu MC. Genericity and Singularities of Robot Manipulators Ieee Transactions On Robotics and Automation. 8: 545-559. DOI: 10.1109/70.163780 |
0.491 |
|
1984 |
Leu MC, Mote CD. Origin of idling noise in circular saws and its suppression Wood Science and Technology. 18: 33-49. DOI: 10.1007/BF00632129 |
0.463 |
|
1982 |
Leu MC, Mote CD. VORTEX SHEDDING: THE SOURCE OF NOISE AND VIBRATION IN IDLING CIRCULAR SAWS American Society of Mechanical Engineers (Paper). |
0.434 |
|
1980 |
Mote CD, Leu MC. WHISTLING INSTABILITY IN IDLING CIRCULAR SAWS Journal of Dynamic Systems, Measurement and Control, Transactions of the Asme. 102: 114-122. |
0.465 |
|
Show low-probability matches. |