Year |
Citation |
Score |
2019 |
Üstünyagiz E, Nielsen CV, Christiansen P, Martins PAF, Altan T, Bay NO. A combined numerical and experimental approach for determining the contact temperature in an industrial ironing operation Journal of Materials Processing Technology. 264: 249-258. DOI: 10.1016/J.Jmatprotec.2018.09.015 |
0.404 |
|
2019 |
Fallahiarezoodar A, Gupta T, Goertemiller C, Altan T. Residual stresses and springback reduction in U-channel drawing of Al5182-O by using a servo press and a servo hydraulic cushion Production Engineering. 13: 219-226. DOI: 10.1007/S11740-019-00878-3 |
0.363 |
|
2018 |
Üstünyagiz E, Altan T. Design of Progressive Die Sequence by Considering the Effect of Friction, Temperature and Contact Pressure Key Engineering Materials. 767: 232-239. DOI: 10.4028/Www.Scientific.Net/Kem.767.232 |
0.321 |
|
2018 |
Konzack S, Radonjic R, Liewald M, Altan T. Prediction and reduction of springback in 3D hat shape forming of AHSS Procedia Manufacturing. 15: 660-667. DOI: 10.1016/J.Promfg.2018.07.296 |
0.432 |
|
2016 |
Fallahiarezoodar A, Peker R, Altan T. Temperature Increase in Forming of Advanced High-Strength Steels Effect of Ram Speed Using a Servodrive Press Journal of Manufacturing Science and Engineering-Transactions of the Asme. 138: 94503. DOI: 10.1115/1.4033996 |
0.427 |
|
2016 |
Yang X, Choi C, Sever NK, Altan T. Prediction of springback in air-bending of Advanced High Strength steel (DP780) considering Youngs modulus variation and with a piecewise hardening function International Journal of Mechanical Sciences. 105: 266-272. DOI: 10.1016/J.Ijmecsci.2015.11.028 |
0.407 |
|
2015 |
Fallahiarezoodar A, Ju L, Altan T. Use of FE Simulation and Servo Press Capabilities in Forming of AHSS and Aluminum Alloys Key Engineering Materials. 639: 13-20. DOI: 10.4028/Www.Scientific.Net/Kem.639.13 |
0.389 |
|
2015 |
Ju L, Mao T, Malpica J, Altan T. Evaluation of lubricants for stamping of Al 5182-O aluminum sheet using cup drawing test Journal of Manufacturing Science and Engineering, Transactions of the Asme. 137. DOI: 10.1115/1.4030750 |
0.383 |
|
2015 |
Ju L, Patil S, Dykeman J, Altan T. Forming of Al 5182-o in a servo press at room and elevated temperatures Journal of Manufacturing Science and Engineering, Transactions of the Asme. 137. DOI: 10.1115/1.4030334 |
0.342 |
|
2014 |
Kim H, Altan T. Effects of surface finish and die temperature on friction and lubrication in forging Procedia Engineering. 81: 1848-1853. DOI: 10.1016/J.Proeng.2014.10.244 |
0.598 |
|
2014 |
Groseclose A, Son HS, Dykeman J, Altan T. Determination of biaxial flow stress using frictionless dome test Procedia Engineering. 81: 1079-1083. DOI: 10.1016/J.Proeng.2014.10.144 |
0.318 |
|
2013 |
Subramonian S, Altan T, Campbell C, Ciocirlan B. Determination of forces in high speed blanking using FEM and experiments Journal of Materials Processing Technology. 213: 2184-2190. DOI: 10.1016/J.Jmatprotec.2013.06.014 |
0.765 |
|
2013 |
Subramonian S, Altan T, Ciocirlan B, Campbell C. Optimum selection of variable punch-die clearance to improve tool life in blanking non-symmetric shapes International Journal of Machine Tools and Manufacture. 75: 63-71. DOI: 10.1016/J.Ijmachtools.2013.09.004 |
0.758 |
|
2012 |
Choi C, Groseclose A, Altan T. Estimation of plastic deformation and abrasive wear in warm forging dies Journal of Materials Processing Technology. 212: 1742-1752. DOI: 10.1016/J.Jmatprotec.2012.03.023 |
0.406 |
|
2011 |
Altan T, Kardes N, Kim H. Investigation of Galling In Forming Galvanized Steel Sheet Corrosion Science and Technology. 10: 1-5. DOI: 10.14773/Cst.2011.10.1.001 |
0.579 |
|
2011 |
Subramonian S, Kardes N, Demiralp Y, Jurich M, Altan T. Evaluation of stamping lubricants in forming galvannealed steels for industrial application Journal of Manufacturing Science and Engineering, Transactions of the Asme. 133. DOI: 10.1115/1.4003948 |
0.771 |
|
2010 |
Nasser A, Yadav A, Pathak P, Altan T. Determination of the flow stress of five AHSS sheet materials (DP 600, DP 780, DP 780-CR, DP 780-HY and TRIP 780) using the uniaxial tensile and the biaxial Viscous Pressure Bulge (VPB) tests Journal of Materials Processing Technology. 210: 429-436. DOI: 10.1016/J.Jmatprotec.2009.10.003 |
0.344 |
|
2009 |
Al-Zkeri I, Rech J, Altan T, Hamdi H, Valiorgue F. Optimization Of The Cutting Edge Geometry Of Coated Carbide Tools In Dry Turning Of Steels Using A Finite Element Analysis Machining Science and Technology. 13: 36-51. DOI: 10.1080/10910340902776051 |
0.454 |
|
2009 |
Kountanya R, Al-Zkeri I, Altan T. Effect of tool edge geometry and cutting conditions on experimental and simulated chip morphology in orthogonal hard turning of 100Cr6 steel Journal of Materials Processing Technology. 209: 5068-5076. DOI: 10.1016/J.Jmatprotec.2009.02.011 |
0.749 |
|
2009 |
Kim H, Altan T, Yan Q. Evaluation of stamping lubricants in forming advanced high strength steels (AHSS) using deep drawing and ironing tests Journal of Materials Processing Technology. 209: 4122-4133. DOI: 10.1016/J.Jmatprotec.2008.10.007 |
0.588 |
|
2008 |
Kaya S, Spampinato G, Altan T. An Experimental Study on Nonisothermal Deep Drawing Process Using Aluminum and Magnesium Alloys Journal of Manufacturing Science and Engineering-Transactions of the Asme. 130: 61001. DOI: 10.1115/1.2975228 |
0.317 |
|
2008 |
Kim H, Sung J, Goodwin FE, Altan T. Investigation of galling in forming galvanized advanced high strength steels (AHSSs) using the twist compression test (TCT) Journal of Materials Processing Technology. 205: 459-468. DOI: 10.1016/J.Jmatprotec.2007.11.281 |
0.611 |
|
2008 |
Kaya S, Altan T, Groche P, Klöpsch C. Determination of the flow stress of magnesium AZ31-O sheet at elevated temperatures using the hydraulic bulge test International Journal of Machine Tools & Manufacture. 48: 550-557. DOI: 10.1016/J.Ijmachtools.2007.06.011 |
0.32 |
|
2008 |
Kim H, Han S, Yan Q, Altan T. Evaluation of tool materials, coatings and lubricants in forming galvanized advanced high strength steels (AHSS) Cirp Annals-Manufacturing Technology. 57: 299-304. DOI: 10.1016/J.Cirp.2008.03.029 |
0.388 |
|
2007 |
Altan T, Kaya S, Aue-u-Ian Y. Forming Al and Mg Alloy Sheet and Tube at Elevated Temperatures Key Engineering Materials. 344: 317-324. DOI: 10.4028/Www.Scientific.Net/Kem.344.317 |
0.35 |
|
2007 |
Sartkulvanich P, Altan T, Jasso F, Rodriguez C. Finite Element Modeling of Hard Roller Burnishing: An Analysis on the Effects of Process Parameters Upon Surface Finish and Residual Stresses Journal of Manufacturing Science and Engineering-Transactions of the Asme. 129: 705-716. DOI: 10.1115/1.2738121 |
0.42 |
|
2007 |
Kim H, Nargundkar N, Altan T. Prediction of bend allowance and springback in air bending Journal of Manufacturing Science and Engineering-Transactions of the Asme. 129: 342-351. DOI: 10.1115/1.2673527 |
0.574 |
|
2007 |
Sartkulvanich P, Sahlan H, Altan T. A Finite Element Analysis Of Burr Formation In Face Milling Of A Cast Aluminum Alloy Machining Science and Technology. 11: 157-181. DOI: 10.1080/10910340701339895 |
0.424 |
|
2007 |
Schrader T, Shirgaokar M, Altan T. A critical evaluation of the double cup extrusion test for selection of cold forging lubricants Journal of Materials Processing Technology. 189: 36-44. DOI: 10.1016/J.Jmatprotec.2006.11.229 |
0.81 |
|
2007 |
Kim H, Sung JH, Sivakumar R, Altan T. Evaluation of stamping lubricants using the deep drawing test International Journal of Machine Tools and Manufacture. 47: 2120-2132. DOI: 10.1016/J.Ijmachtools.2007.04.014 |
0.625 |
|
2007 |
Gariety M, Ngaile G, Altan T. Evaluation of new cold forging lubricants without zinc phosphate precoat International Journal of Machine Tools and Manufacture. 47: 673-681. DOI: 10.1016/J.Ijmachtools.2006.04.016 |
0.411 |
|
2007 |
Hwang Y, Lin Y, Altan T. Evaluation of tubular materials by a hydraulic bulge test International Journal of Machine Tools & Manufacture. 47: 343-351. DOI: 10.1016/J.Ijmachtools.2006.03.009 |
0.408 |
|
2007 |
Altan T, Palaniswamy H. Process modeling and optimization in sheet metal forming - Selected applications and challenges Steel Research International. 78: 733-739. DOI: 10.1002/Srin.200706278 |
0.81 |
|
2006 |
Altan T, Jain N, Shi X, Ngaile G, Pax B, Harman B, Homan G. Progressive die sequence design for deep drawing round cups using finite element analysis Journal of Manufacturing Science and Engineering, Transactions of the Asme. 128: 366-369. DOI: 10.1115/1.2039942 |
0.39 |
|
2006 |
Palaniswamy H, Braedel M, AThandapani, Altan T. Optimal programming of multi-point cushion systems for sheet metal forming Cirp Annals - Manufacturing Technology. 55: 249-254. DOI: 10.1016/S0007-8506(07)60409-0 |
0.77 |
|
2006 |
Koç M, Culp J, Altan T. Prediction of residual stresses in quenched aluminum blocks and their reduction through cold working processes Journal of Materials Processing Technology. 174: 342-354. DOI: 10.1016/J.Jmatprotec.2006.02.007 |
0.339 |
|
2005 |
Altan T, Palaniswamy H, Ambrogio G, Aue-u-Ian Y. Tube and Sheet Hydroforming-Advances in Material Modeling, Tooling and Process Simulation Advanced Materials Research. 1-12. DOI: 10.4028/Www.Scientific.Net/Amr.6-8.1 |
0.811 |
|
2005 |
Sartkulvanich P, Altan T, Soehner J. Flow stress data for finite element simulation in metal cutting : A progress report on madams Machining Science and Technology. 9: 271-288. DOI: 10.1081/Mst-200059068 |
0.47 |
|
2005 |
Sartkulvanich P, Altan T, Göcmen A. Effects of flow stress and friction models in finite element simulation of orthogonal cutting - A sensitivity analysis Machining Science and Technology. 9: 1-26. DOI: 10.1081/Mst-200051211 |
0.43 |
|
2005 |
Yen YC, Sartkulvanich P, Altan T. Finite element modeling of roller burnishing process Cirp Annals - Manufacturing Technology. 54: 237-240. DOI: 10.1016/S0007-8506(07)60092-4 |
0.403 |
|
2005 |
Cho H, Altan T. Determination of flow stress and interface friction at elevated temperatures by inverse analysis technique Journal of Materials Processing Technology. 170: 64-70. DOI: 10.1016/J.Jmatprotec.2005.04.091 |
0.391 |
|
2005 |
Chandrasekharan S, Palaniswamy H, Jain N, Ngaile G, Altan T. Evaluation of stamping lubricants at various temperature levels using the ironing test International Journal of Machine Tools and Manufacture. 45: 379-388. DOI: 10.1016/J.Ijmachtools.2004.09.014 |
0.788 |
|
2005 |
Altan T, Palaniswamy H, Cho H. Process modeling for precision forming of discrete parts - State of the technology and critical issues Steel Research International. 76: 191-198. DOI: 10.1002/Srin.200505995 |
0.807 |
|
2005 |
Altan T, Palaniswamy H, Yadav A. Recent R&D and applications in sheet & tube hydroforming Technical Paper - Society of Manufacturing Engineers. |
0.79 |
|
2004 |
Hwang YM, Altan T. Process fusion: Tube hydroforming and crushing in a square die Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 218: 169-174. DOI: 10.1243/095440504322886497 |
0.309 |
|
2004 |
Ngaile G, Gariety M, Altan T. Enhancing tribological conditions in tube hydroforming by using textured tubes Proceedings of the Asme/Stle International Joint Tribology Conference, Ijtc 2004. 1559-1566. DOI: 10.1115/1.2197849 |
0.385 |
|
2004 |
Yen Y-, Jain A, Chigurupati P, Wu W-, Altan T. Computer Simulation of Orthogonal Cutting using a Tool with Multiple Coatings Machining Science and Technology. 8: 305-326. DOI: 10.1081/Mst-200029230 |
0.399 |
|
2004 |
Aue-u-Lan Y, Ngaile G, Altan T. Optimizing tube hydroforming using process simulation and experimental verification Journal of Materials Processing Technology. 146: 137-143. DOI: 10.1016/S0924-0136(03)00854-9 |
0.446 |
|
2004 |
Strano M, Jirathearanat S, Shr SG, Altan T. Virtual process development in tube hydroforming Journal of Materials Processing Technology. 146: 130-136. DOI: 10.1016/S0924-0136(03)00853-7 |
0.784 |
|
2004 |
Jirathearanat S, Hartl C, Altan T. Hydroforming of Y-shapes - Product and process design using FEA simulation and experiments Journal of Materials Processing Technology. 146: 124-129. DOI: 10.1016/S0924-0136(03)00852-5 |
0.779 |
|
2004 |
Ngaile G, Jaeger S, Altan T. Lubrication in tube hydroforming (THF): Part II. Performance evaluation of lubricants using LDH test and pear-shaped tube expansion test Journal of Materials Processing Technology. 146: 116-123. DOI: 10.1016/S0924-0136(03)00851-3 |
0.363 |
|
2004 |
Ngaile G, Jaeger S, Altan T. Lubrication in tube hydroforming (THF): Part I. Lubrication mechanisms and development of model tests to evaluate lubricants and die coatings in the transition and expansion zones Journal of Materials Processing Technology. 146: 108-115. DOI: 10.1016/S0924-0136(03)00850-1 |
0.41 |
|
2004 |
Ahmetoglu M, Hua J, Kulukuru S, Altan T. Hydroforming of sheet metal using a viscous pressure medium Journal of Materials Processing Technology. 146: 97-107. DOI: 10.1016/S0924-0136(03)00849-5 |
0.455 |
|
2004 |
Yen YC, Söhner J, Lilly B, Altan T. Estimation of tool wear in orthogonal cutting using the finite element analysis Journal of Materials Processing Technology. 146: 82-91. DOI: 10.1016/S0924-0136(03)00847-1 |
0.692 |
|
2004 |
Yen YC, Jain A, Altan T. A finite element analysis of orthogonal machining using different tool edge geometries Journal of Materials Processing Technology. 146: 72-81. DOI: 10.1016/S0924-0136(03)00846-X |
0.7 |
|
2004 |
Sartkulvanich P, Koppka F, Altan T. Determination of flow stress for metal cutting simulation - A progress report Journal of Materials Processing Technology. 146: 61-71. DOI: 10.1016/S0924-0136(03)00845-8 |
0.408 |
|
2004 |
Palaniswamy H, Ngaile G, Altan T. Finite element simulation of magnesium alloy sheet forming at elevated temperatures Journal of Materials Processing Technology. 146: 52-60. DOI: 10.1016/S0924-0136(03)00844-6 |
0.781 |
|
2004 |
Shirgaokar M, Ngaile G, Altan T, Yu JH, Balconi J, Rentfrow R, Worrell WJ. Hydraulic crimping: Application to the assembly of tubular components Journal of Materials Processing Technology. 146: 44-51. DOI: 10.1016/S0924-0136(03)00843-4 |
0.809 |
|
2004 |
Shirgaokar M, Cho H, Ngaile G, Altan T, Yu JH, Balconi J, Rentfrow R, Worrell WJ. Optimization of mechanical crimping to assemble tubular components Journal of Materials Processing Technology. 146: 35-43. DOI: 10.1016/S0924-0136(03)00842-2 |
0.808 |
|
2004 |
Palaniswamy H, Ngaile G, Altan T. Optimization of blank dimensions to reduce springback in the flexforming process Journal of Materials Processing Technology. 146: 28-34. DOI: 10.1016/S0924-0136(03)00841-0 |
0.795 |
|
2004 |
Livatyali H, Laxhuber T, Altan T. Experimental investigation of forming defects in flat surface-convex edge hemming Journal of Materials Processing Technology. 146: 20-27. DOI: 10.1016/S0924-0136(03)00840-9 |
0.403 |
|
2004 |
Wu HC, Altan T. Process optimization in stamping - A case study for flanging a clutch hub from steel plate Journal of Materials Processing Technology. 146: 8-19. DOI: 10.1016/S0924-0136(03)00839-2 |
0.5 |
|
2004 |
Gutscher G, Wu HC, Ngaile G, Altan T. Determination of flow stress for sheet metal forming using the viscous pressure bulge (VPB) test Journal of Materials Processing Technology. 146: 1-7. DOI: 10.1016/S0924-0136(03)00838-0 |
0.4 |
|
2004 |
Strano M, Altan T. An inverse energy approach to determine the flow stress of tubular materials for hydroforming applications Journal of Materials Processing Technology. 146: 92-96. DOI: 10.1016/J.Jmatprotec.2003.07.016 |
0.397 |
|
2004 |
Sheng ZQ, Jirathearanat S, Altan T. Adaptive FEM simulation for prediction of variable blank holder force in conical cup drawing International Journal of Machine Tools and Manufacture. 44: 487-494. DOI: 10.1016/J.Ijmachtools.2003.11.001 |
0.784 |
|
2003 |
Livatyali H, Kinzel GL, Altan T. Computer aided die design of straight flanging using approximate numerical analysis Journal of Materials Processing Technology. 142: 532-543. DOI: 10.1016/S0924-0136(03)00655-1 |
0.469 |
|
2003 |
Hwang YM, Altan T. Finite element analysis of tube hydroforming processes in a rectangular die Finite Elements in Analysis and Design. 39: 1071-1082. DOI: 10.1016/S0168-874X(02)00157-9 |
0.477 |
|
2003 |
Cho H, Ngalle G, Altan T. Simultaneous Determination of Flow Stress and Interface Friction by Finite Element Based Inverse Analysis Technique Cirp Annals. 52: 221-224. DOI: 10.1016/S0007-8506(07)60570-8 |
0.402 |
|
2002 |
Yen Y-, Söhner J, Weule H, Schmidt J, Altan T. Estimation Of Tool Wear Of Carbide Tool In Orthogonal Cutting Using Fem Simulation Machining Science and Technology. 6: 467-486. DOI: 10.1081/Mst-120016256 |
0.473 |
|
2002 |
Hwang YM, Altan T. FE simulations of the crushing of circular tubes into triangular cross-sections Journal of Materials Processing Technology. 125: 833-838. DOI: 10.1016/S0924-0136(02)00385-0 |
0.453 |
|
2002 |
Livatyali H, Wu HC, Altan T. Prediction and elimination of springback in straight flanging using computer-aided design methods: Part 2: FEM predictions and tool design Journal of Materials Processing Technology. 120: 348-354. DOI: 10.1016/S0924-0136(01)01161-X |
0.438 |
|
2002 |
Koç M, Altan T. Application of two dimensional (2D) FEA for the tube hydroforming process International Journal of Machine Tools and Manufacture. 42: 1285-1295. DOI: 10.1016/S0890-6955(02)00033-0 |
0.459 |
|
2002 |
Koç M, Altan T. Prediction of forming limits and parameters in the tube hydroforming process International Journal of Machine Tools and Manufacture. 42: 123-138. DOI: 10.1016/S0890-6955(01)00048-7 |
0.388 |
|
2001 |
Livatyali H, Altan T. Prediction and elimination of springback in straight flanging using computer aided design methods: Part 1. Experimental investigations Journal of Materials Processing Technology. 117: 262-268. DOI: 10.1016/S0924-0136(01)01164-5 |
0.45 |
|
2001 |
Koç M, Altan T. Overall review of the tube hydroforming (THF) technology Journal of Materials Processing Technology. 108: 384-393. DOI: 10.1016/S0924-0136(00)00830-X |
0.386 |
|
2001 |
Shatla M, Kerk C, Altan T. Process modeling in machining. Part II: Validation and applications of the determined flow stress data International Journal of Machine Tools and Manufacture. 41: 1659-1680. DOI: 10.1016/S0890-6955(01)00017-7 |
0.446 |
|
2001 |
Shatla M, Kerk C, Altan T. Process modeling in machining. Part I: determination of flow stress data International Journal of Machine Tools & Manufacture. 41: 1511-1534. DOI: 10.1016/S0890-6955(01)00016-5 |
0.417 |
|
2001 |
Koç M, Aue-u-lan Y, Altan T. On the characteristics of tubular materials for hydroforming—experimentation and analysis International Journal of Machine Tools & Manufacture. 41: 761-772. DOI: 10.1016/S0890-6955(00)00070-5 |
0.361 |
|
2001 |
Altan T, Lilly B, Yen YC. Manufacturing of dies and molds Cirp Annals - Manufacturing Technology. 50: 405-423. DOI: 10.1016/S0007-8506(07)62988-6 |
0.455 |
|
2001 |
Strano M, Jirathearanat S, Altan T. Adaptive fem simulation for tube hydroforming: A geometry-based approach for wrinkle detection Cirp Annals - Manufacturing Technology. 50: 185-190. DOI: 10.1016/S0007-8506(07)62101-5 |
0.768 |
|
2000 |
Shulkin LB, Mendelsohn DA, Kinzel GL, Altan T. A useful solution for estimating contact pressure between a plate and foundation Journal of Manufacturing Science and Engineering, Transactions of the Asme. 122: 781-789. DOI: 10.1115/1.1286167 |
0.355 |
|
2000 |
Shatla M, Altan T. Analytical modeling of drilling and ball end milling Journal of Materials Processing Technology. 98: 125-133. DOI: 10.1016/S0924-0136(99)00313-1 |
0.445 |
|
2000 |
Jirathearanat S, Vazquez V, Rodríguez CA, Altan T. Virtual processing - application of rapid prototyping for visualization of metal forming processes Journal of Materials Processing Technology. 98: 116-124. DOI: 10.1016/S0924-0136(99)00312-X |
0.782 |
|
2000 |
Fallböhmer P, Rodrı́guez CA, Özel T, Altan T. High-speed machining of cast iron and alloy steels for die and mold manufacturing Journal of Materials Processing Technology. 98: 104-115. DOI: 10.1016/S0924-0136(99)00311-8 |
0.417 |
|
2000 |
Ceretti E, Lazzaroni C, Menegardo L, Altan T. Turning simulations using a three-dimensional FEM code Journal of Materials Processing Technology. 98: 99-103. DOI: 10.1016/S0924-0136(99)00310-6 |
0.491 |
|
2000 |
Vazquez V, Hannan D, Altan T. Tool life in cold forging - an example of design improvement to increase service life Journal of Materials Processing Technology. 98: 90-96. DOI: 10.1016/S0924-0136(99)00309-X |
0.381 |
|
2000 |
Vazquez V, Altan T. Die design for flashless forging of complex parts Journal of Materials Processing Technology. 98: 81-89. DOI: 10.1016/S0924-0136(99)00308-8 |
0.43 |
|
2000 |
Hauk S, Vazquez VH, Altan T. Finite element simulation of the Flow-Splitting-Process Journal of Materials Processing Technology. 98: 70-80. DOI: 10.1016/S0924-0136(99)00307-6 |
0.459 |
|
2000 |
Livatyali H, Duggal N, Ahmetoglu M, Altan T. Investigation of crack formation on the Galvalume coating of roll formed roof panels Journal of Materials Processing Technology. 98: 53-61. DOI: 10.1016/S0924-0136(99)00305-2 |
0.374 |
|
2000 |
Livatyali H, Müderrisoglu A, Ahmetoglu MA, Akgerman N, Kinzel GL, Altan T. Improvement of hem quality by optimizing flanging and pre-hemming operations using computer aided die design Journal of Materials Processing Technology. 98: 41-52. DOI: 10.1016/S0924-0136(99)00304-0 |
0.49 |
|
2000 |
Sokolowski T, Gerke K, Ahmetoglu M, Altan T. Evaluation of tube formability and material characteristics: hydraulic bulge testing of tubes Journal of Materials Processing Technology. 98: 34-40. DOI: 10.1016/S0924-0136(99)00303-9 |
0.468 |
|
2000 |
Ahmetoglu M, Altan T. Tube hydroforming: State-of-the-art and future trends Journal of Materials Processing Technology. 98: 25-33. DOI: 10.1016/S0924-0136(99)00302-7 |
0.404 |
|
2000 |
Esche SK, Ahmetoglu MA, Kinzel GL, Altan T. Numerical and experimental investigation of redrawing of sheet metals Journal of Materials Processing Technology. 98: 17-24. DOI: 10.1016/S0924-0136(99)00301-5 |
0.44 |
|
2000 |
Shulkin LB, Posteraro RA, Ahmetoglu MA, Kinzel GL, Altan T. Blank holder force (BHF) control in viscous pressure forming (VPF) of sheet metal Journal of Materials Processing Technology. 98: 7-16. DOI: 10.1016/S0924-0136(99)00300-3 |
0.422 |
|
2000 |
Liu J, Ahmetoglu M, Altan T. Evaluation of sheet metal formability, viscous pressure forming (VPF) dome test Journal of Materials Processing Technology. 98: 1-6. DOI: 10.1016/S0924-0136(99)00299-X |
0.387 |
|
2000 |
Thomas W, Oenoki T, Altan T. Process simulation in stamping - Recent applications for product and process design Journal of Materials Processing Technology. 98: 232-243. DOI: 10.1016/S0924-0136(99)00204-6 |
0.495 |
|
2000 |
Ahmetoglu M, Sutter K, Li XJ, Altan T. Tube hydroforming: current research, applications and need for training Journal of Materials Processing Technology. 98: 224-231. DOI: 10.1016/S0924-0136(99)00203-4 |
0.398 |
|
2000 |
Vazquez V, Altan T. New concepts in die design - Physical and computer modeling applications Journal of Materials Processing Technology. 98: 212-223. DOI: 10.1016/S0924-0136(99)00202-2 |
0.397 |
|
2000 |
Özel T, Altan T. Process simulation using finite element method - prediction of cutting forces, tool stresses and temperatures in high-speed flat end milling International Journal of Machine Tools and Manufacture. 40: 713-738. DOI: 10.1016/S0890-6955(99)00080-2 |
0.486 |
|
2000 |
Özel T, Altan T. Determination of workpiece flow stress and friction at the chip-tool contact for high-speed cutting International Journal of Machine Tools and Manufacture. 40: 133-152. DOI: 10.1016/S0890-6955(99)00051-6 |
0.419 |
|
2000 |
Koç M, Allen T, Jiratheranat S, Altan T. The use of FEA and design of experiments to establish design guidelines for simple hydroformed parts International Journal of Machine Tools & Manufacture. 40: 2249-2266. DOI: 10.1016/S0890-6955(00)00047-X |
0.423 |
|
1999 |
Thomas W, Altan T. Implementing computer simulation into the concept to product process Sae Technical Papers. DOI: 10.4271/1999-01-1003 |
0.499 |
|
1998 |
Thomas W, Altan T. Application of computer modelling in part, die, and process design for manufacturing of automotive stampings Steel Research. 69: 181-187. DOI: 10.1002/Srin.199801470 |
0.485 |
|
1998 |
Altan T, Fallböhmer P, Rodriguez C, Özel T. High speed cutting of cast iron and alloy steels - State of research Vdi Berichte. 309-332. |
0.303 |
|
1998 |
Özel T, Lucchi M, Rodríguez CA, Altan T. Prediction of chip formation and cutting forces in flat end milling: Comparison of process simulations with experiments Technical Paper - Society of Manufacturing Engineers. Ad. 1-6. |
0.386 |
|
1997 |
Ahmetoglu MA, Kinzel G, Altan T. Forming of aluminum alloys—application of computer simulations and blank holding force control Journal of Materials Processing Technology. 71: 147-151. DOI: 10.1016/S0924-0136(97)00161-1 |
0.348 |
|
1997 |
Breitling J, Chernauskas V, Taupin E, Altan T. Precision shearing of billets—special equipment and process simulation Journal of Materials Processing Technology. 71: 119-125. DOI: 10.1016/S0924-0136(97)00157-X |
0.46 |
|
1997 |
Altan T, Vazquez V. Status of process simulation using 2D and 3D finite element method 'what is practical today? What can we expect in the future?' Journal of Materials Processing Technology. 71: 49-63. DOI: 10.1016/S0924-0136(97)00142-8 |
0.474 |
|
1997 |
Siegert K, Altan T, Nakagawa T. Development and manufacture of dies for car body production Cirp Annals - Manufacturing Technology. 46: 535-543. DOI: 10.1016/S0007-8506(07)60879-8 |
0.357 |
|
1997 |
Ceretti E, Taupin E, Altan T. Simulation of metal flow and fracture applications in orthogonal cutting, blanking, and cold extrusion Cirp Annals - Manufacturing Technology. 46: 187-X42. DOI: 10.1016/S0007-8506(07)60805-1 |
0.375 |
|
1997 |
Esche SK, Kinzel GL, Altan T. Issues in convergence improvement for non-linear finite element programs International Journal For Numerical Methods in Engineering. 40: 4577-4594. DOI: 10.1002/(Sici)1097-0207(19971230)40:24<4577::Aid-Nme273>3.0.Co;2-D |
0.364 |
|
1997 |
Altan T, Fallboehmer P, Kumar S. Computer simulation of orthogonal metal cutting process: Determination of material properties and effects of tool geometry on chip flow Technical Paper - Society of Manufacturing Engineers. Mr. 97. |
0.369 |
|
1997 |
Breitling J, Chernauskas V, Taupin E, Altan T. Precision shearing of billets - Special equipment and process simulation Journal of Materials Processing Technology. 71: 119-125. |
0.361 |
|
1996 |
Altan T, Vazquez V. Numerical process simulation for tool and process design in bulk metal forming Cirp Annals - Manufacturing Technology. 45. DOI: 10.1016/S0007-8506(07)60514-9 |
0.477 |
|
1996 |
Fallböhmer P, Altan T, Tönshoff HK, Nakagawa T. Survey of the die and mold manufacturing industry - Practices in Germany, Japan, and the United States - Journal of Materials Processing Technology. 59: 158-168. DOI: 10.1016/0924-0136(96)02297-2 |
0.31 |
|
1996 |
Ceretti E, Fallböhmer P, Wu WT, Altan T. Application of 2D FEM to chip formation in orthogonal cutting Journal of Materials Processing Technology. 59: 169-180. DOI: 10.1016/0924-0136(96)02296-0 |
0.462 |
|
1996 |
Vazquez V, Sweeney K, Wallace D, Wolff C, Ober M, Altan T. Tooling and process design to cold forge a cross groove inner race for a constant velocity joint — physical modeling and FEM process simulation Journal of Materials Processing Technology. 59: 144-157. DOI: 10.1016/0924-0136(96)02295-9 |
0.469 |
|
1996 |
Painter B, Shivpuri R, Altan T. Prediction of die wear during hot-extrusion of engine valves Journal of Materials Processing Technology. 59: 132-143. DOI: 10.1016/0924-0136(96)02294-7 |
0.451 |
|
1996 |
Kim H, Lee SM, Altan T. Prediction of hardness distribution in cold backward extruded cups Journal of Materials Processing Technology. 59: 113-121. DOI: 10.1016/0924-0136(96)02292-3 |
0.343 |
|
1996 |
Koç M, Vazquez V, Witulski T, Altan T. Application of the finite element method to predict material flow and defects in the semi-solid forging of A356 aluminum alloys Journal of Materials Processing Technology. 59: 106-112. DOI: 10.1016/0924-0136(96)02291-1 |
0.405 |
|
1996 |
Takemasu T, Vazquez V, Painter B, Altan T. Investigation of metal flow and preform optimization in flashless forging of a connecting rod Journal of Materials Processing Technology. 59: 95-105. DOI: 10.1016/0924-0136(96)02290-X |
0.438 |
|
1996 |
O'Connell M, Painter B, Maul G, Altan T. Flashless closed-die upset forging-load estimation for optimal cold header selection Journal of Materials Processing Technology. 59: 81-94. DOI: 10.1016/0924-0136(96)02289-3 |
0.344 |
|
1996 |
Taupin E, Breitling J, Wu WT, Altan T. Material fracture and burr formation in blanking results of FEM simulations and comparison with experiments Journal of Materials Processing Technology. 59: 68-78. DOI: 10.1016/0924-0136(96)02288-1 |
0.448 |
|
1996 |
Heislitz F, Livatyali H, Ahmetoglu MA, Kinzel GL, Altan T. Simulation of roll forming process with the 3-D FEM code PAM-STAMP Journal of Materials Processing Technology. 59: 59-67. DOI: 10.1016/0924-0136(96)02287-X |
0.463 |
|
1996 |
Liu J, Westhoff B, Ahmetoglu MA, Altan T. Application of viscous pressure forming (VPF) to low volume stamping of difficult-to-form alloys —results of preliminary FEM simulations Journal of Materials Processing Technology. 59: 49-58. DOI: 10.1016/0924-0136(96)02286-8 |
0.451 |
|
1996 |
Duggal N, Ahmetoglu MA, Kinzel GL, Altan T. Computer aided simulation of cold roll forming - A computer program for simple section profiles Journal of Materials Processing Technology. 59: 41-48. DOI: 10.1016/0924-0136(96)02285-6 |
0.384 |
|
1996 |
Shulkin L, Jansen SW, Ahmetoglu MA, Kinzel GL, Altan T. Elastic deflections of the blank holder in deep drawing of sheet metal Journal of Materials Processing Technology. 59: 34-40. DOI: 10.1016/0924-0136(96)02284-4 |
0.441 |
|
1996 |
Esche SK, Khamitkar S, Kinzel GL, Altan T. Process and die design for multi-step forming of round parts from sheet metal Journal of Materials Processing Technology. 59: 24-33. DOI: 10.1016/0924-0136(96)02283-2 |
0.441 |
|
1996 |
Breitling J, Wallace D, Altan T. Investigations of different loading conditions in a high speed mechanical press Journal of Materials Processing Technology. 59: 18-23. DOI: 10.1016/0924-0136(96)02282-0 |
0.374 |
|
1996 |
Muderrisoglu A, Murata M, Ahmetoglu MA, Kinzel G, Altan T. Bending, flanging, and hemming of aluminum sheet − an experimental study Journal of Materials Processing Technology. 59: 10-17. DOI: 10.1016/0924-0136(96)02281-9 |
0.4 |
|
1996 |
Schünemann M, Ahmetoglu MA, Altan T. Prediction of process conditions in drawing and ironing of cans Journal of Materials Processing Technology. 59: 1-9. DOI: 10.1016/0924-0136(96)02280-7 |
0.438 |
|
1996 |
Darendeliler H, Altan T. Analysis of axisymmetric cup drawing in relation to friction Journal of Materials Processing Technology. 58: 293-301. DOI: 10.1016/0924-0136(95)02154-X |
0.476 |
|
1996 |
Mantripragada R, Kinzel G, Altan T. A computer-aided engineering system for feature-based design of box-type sheet metal parts Journal of Materials Processing Technology. 57: 241-248. DOI: 10.1016/0924-0136(95)02071-3 |
0.356 |
|
1995 |
Tufekci SS, Ahmetoglu MA, Kinzel G, Altan T. Process Simulation for Can Manufacturing by Deep Drawing and Ironing Sae Transactions. 104: 532-540. DOI: 10.4271/950696 |
0.37 |
|
1995 |
Ahmetoglu M, Broek TR, Kinzel G, Altan T. Control of Blank Holder Force to Eliminate Wrinkling and Fracture in Deep-Drawing Rectangular Parts Cirp Annals - Manufacturing Technology. 44: 247-250. DOI: 10.1016/S0007-8506(07)62318-X |
0.307 |
|
1995 |
Ahmetoglu MA, Brouwers D, Shulkin L, Taupin L, Kinzel GL, Altan T. Deep drawing of round cups from tailor-welded blanks Journal of Materials Processing Tech.. 53: 684-694. DOI: 10.1016/0924-0136(94)01767-U |
0.405 |
|
1995 |
Wang CT, Kinzel G, Altan T. Failure and wrinkling criteria and mathematical modeling of shrink and stretch flanging operations in sheet-metal forming Journal of Materials Processing Tech.. 53: 759-780. DOI: 10.1016/0924-0136(94)01766-T |
0.367 |
|
1994 |
Tufekci SS, Wang CT, Kinzel GL, Altan T. Estimation and control of drawbead forces in sheet metal forming Sae Technical Papers. DOI: 10.4271/940941 |
0.378 |
|
1994 |
Wang CT, Tufekci S, Kinzel GL, Altan T. Investigation of shrink flanging-prediction of wrinkling and experimental verification Sae Technical Papers. DOI: 10.4271/940939 |
0.363 |
|
1994 |
Wu WT, Li GJ, Tang JP, Altan T. Finite Element Analysis of Three-Dimensional Metal Flow in Cold and Hot Forming Processes Cirp Annals - Manufacturing Technology. 43: 235-239. DOI: 10.1016/S0007-8506(07)62203-3 |
0.335 |
|
1994 |
Ahmetoglu MA, Kinzel G, Altan T. Computer simulation for tool and process design in sheet forming Journal of Materials Processing Tech.. 46: 421-441. DOI: 10.1016/0924-0136(94)90126-0 |
0.465 |
|
1994 |
Kim H, Sweeney K, Altan T. Application of computer aided simulation to investigate metal flow in selected forging operations Journal of Materials Processing Tech.. 46: 127-154. DOI: 10.1016/0924-0136(94)90107-4 |
0.425 |
|
1994 |
Nagao Y, Knoerr M, Altan T. Improvement of tool life in cold forging of complex automotive parts Journal of Materials Processing Tech.. 46: 73-85. DOI: 10.1016/0924-0136(94)90103-1 |
0.356 |
|
1994 |
Knoerr M, Lange K, Altan T. Fatigue failure of cold forging tooling: causes and possible solutions through fatigue analysis Journal of Materials Processing Tech.. 46: 57-71. DOI: 10.1016/0924-0136(94)90102-3 |
0.388 |
|
1994 |
Yazar Z, Koch KF, Merrick T, Altan T. Feed rate optimization based on cutting force calculations in 3-axis milling of dies and molds with sculptured surfaces International Journal of Machine Tools and Manufacture. 34: 365-377. DOI: 10.1016/0890-6955(94)90006-X |
0.417 |
|
1994 |
Wang CT, Kinzel G, Altan T. Wrinkling criterion for an anisotropic shell with compound curvatures in sheet forming International Journal of Mechanical Sciences. 36: 945-960. DOI: 10.1016/0020-7403(94)90056-6 |
0.33 |
|
1993 |
Altan T, Lilly BW, Kruth JP, König W, Tönshoff HK, van Luttervelt CA, Khairy AB. Advanced Techniques for Die and Mold Manufacturing Cirp Annals - Manufacturing Technology. 42: 707-716. DOI: 10.1016/S0007-8506(07)62533-5 |
0.412 |
|
1993 |
Ghobrial MI, Lee JY, Altan T, Bay N, Hansen BG. Factors Affecting the Double Cup Extrusion Test for Evaluation of Friction in Cold and Warm Forging Cirp Annals. 42: 347-351. DOI: 10.1016/S0007-8506(07)62459-7 |
0.357 |
|
1993 |
Shen G, Shivpuri R, Semiatin SL, Lee JY, Altan T. Investigation of Microstructure and Thermomechanical History in the Hammer Forging of an Incoloy 901 Disk Cirp Annals - Manufacturing Technology. 42: 343-346. DOI: 10.1016/S0007-8506(07)62458-5 |
0.373 |
|
1993 |
Wang C, Kinzel G, Altan T. Mathematical modeling of plane-strain bending of sheet and plate Journal of Materials Processing Tech.. 39: 279-304. DOI: 10.1016/0924-0136(93)90164-2 |
0.377 |
|
1993 |
Shen G, Semiatin SL, Altan T. Investigation of flow stress and microstructure development in non-isothermal forging of Ti-6242 Journal of Materials Processing Tech.. 36: 303-319. DOI: 10.1016/0924-0136(93)90036-6 |
0.307 |
|
1992 |
Shivpuri R, Momin S, Altan T. Computer-Aided Design of Dies to Control Dimensional Quality of Extruded Shapes Cirp Annals - Manufacturing Technology. 41: 275-279. DOI: 10.1016/S0007-8506(07)61203-7 |
0.413 |
|
1992 |
Altan T, Knoerr M. Application of the 2D finite element method to simulation of cold-forging processes Journal of Materials Processing Tech.. 35: 275-302. DOI: 10.1016/0924-0136(92)90323-K |
0.473 |
|
1992 |
Ahmetoglu MA, Altan T, Kinzel GL. Improvement of part quality in stamping by controlling blank-holder force and pressure Journal of Materials Processing Tech.. 33: 195-214. DOI: 10.1016/0924-0136(92)90319-N |
0.351 |
|
1992 |
Yossifon S, Sweeney K, Ahmetoglu M, Altan T. On the acceptable blank-holder force range in the deep-drawing process Journal of Materials Processing Tech.. 33: 175-194. DOI: 10.1016/0924-0136(92)90318-M |
0.412 |
|
1992 |
Udagawa T, Kropp E, Altan T. Investigation of metal flow and temperatures by FEM in the extrusion of Ti-6Al-4V tubes Journal of Materials Processing Tech.. 33: 155-174. DOI: 10.1016/0924-0136(92)90317-L |
0.427 |
|
1992 |
Shin W, Lee SM, Shivpuri R, Altan T. Finite-slab element investigation of square-to-round multi-pass shape rolling Journal of Materials Processing Tech.. 33: 141-154. DOI: 10.1016/0924-0136(92)90316-K |
0.412 |
|
1992 |
Shen G, Semiatin SL, Kropp E, Altan T. A technique to compensate for temperature history effects in the simulation of non-isothermal forging processes Journal of Materials Processing Technology. 33: 125-139. DOI: 10.1016/0924-0136(92)90315-J |
0.413 |
|
1992 |
Shen G, Vedhanayagam A, Kropp E, Altan T. A method for evaluating friction using a backward extrusion-type forging Journal of Materials Processing Tech.. 33: 109-123. DOI: 10.1016/0924-0136(92)90314-I |
0.355 |
|
1992 |
Buschhausen A, Weinmann K, Lee JY, Altan T. Evaluation of lubrication and friction in cold forging using a double backward-extrusion process Journal of Materials Processing Technology. 33: 95-108. DOI: 10.1016/0924-0136(92)90313-H |
0.475 |
|
1992 |
Meidert M, Knoerr M, Westphal K, Altan T. Numerical and physical modelling of cold forging of bevel gears Journal of Materials Processing Tech.. 33: 75-93. DOI: 10.1016/0924-0136(92)90312-G |
0.457 |
|
1992 |
Kim H, Altan T, Sevenler K. Computer-aided part and processing-sequence design in cold forging Journal of Materials Processing Tech.. 33: 57-74. DOI: 10.1016/0924-0136(92)90311-F |
0.381 |
|
1992 |
Knoerr M, Lee J, Altan T. Application of the 2D finite element method to simulation of various forming processes Journal of Materials Processing Tech.. 33: 31-55. DOI: 10.1016/0924-0136(92)90310-O |
0.323 |
|
1992 |
Pale JA, Shivpuri R, Altan T. Recent developments in tooling, machines and research in cold forming of complex parts Journal of Materials Processing Tech.. 33: 1-29. DOI: 10.1016/0924-0136(92)90309-G |
0.45 |
|
1991 |
Shivpuri R, Altan T. Process simulation to improve quality and increase productivity in rolling, ring rolling and forging Sae Technical Papers. DOI: 10.4271/910142 |
0.46 |
|
1991 |
Sitaraman SK, Kinzel GL, Altan T. A knowledge-based system for process-sequence design in axisymmetric sheet-metal forming Journal of Materials Processing Tech.. 25: 247-271. DOI: 10.1016/0924-0136(91)90111-Q |
0.38 |
|
1991 |
Tszeng TC, Altan T. Investigation of ring rolling by pseudo plane-strain FEM analysis Journal of Materials Processing Tech.. 27: 151-161. DOI: 10.1016/0924-0136(91)90050-O |
0.34 |
|
1991 |
Yossifon S, Messerly D, Kropp E, Shivpuri R, Altan T. A servo motor driven multi-action press for sheet metal forming International Journal of Machine Tools and Manufacture. 31: 345-359. DOI: 10.1016/0890-6955(91)90080-M |
0.387 |
|
1991 |
Kim N, Kobayashi S, Altan T. Three-dimensional analysis and computer simulation of shape rolling by the finite and slab element method International Journal of Machine Tools and Manufacture. 31: 553-563. DOI: 10.1016/0890-6955(91)90036-3 |
0.427 |
|
1990 |
Altan T, Miller RA. Design for Forming and other Near Net Shape Manufacturing Processes Cirp Annals - Manufacturing Technology. 39: 609-620. DOI: 10.1016/S0007-8506(07)62998-9 |
0.426 |
|
1989 |
Jenkins BL, Oh SI, Altan T. Investigation of Defect Formation in a 3-Station Closed Die Forging Operation Cirp Annals - Manufacturing Technology. 38: 243-247. DOI: 10.1016/S0007-8506(07)62695-X |
0.433 |
|
1989 |
Vemuri KR, Oh SI, Altan T. BID: A knowledge-based system to automate blocker design International Journal of Machine Tools and Manufacture. 29: 505-518. DOI: 10.1016/0890-6955(89)90068-0 |
0.346 |
|
1988 |
Im YT, Vardan O, Shen G, Altan T. Investigation of Metal Flow in Non-Isothermal Forging Using Ring and Spike Tests Cirp Annals - Manufacturing Technology. 37: 225-230. DOI: 10.1016/S0007-8506(07)61623-0 |
0.362 |
|
1988 |
Altan T. Advances in metal forming processes Robotics and Computer Integrated Manufacturing. 4: 121-128. DOI: 10.1016/0736-5845(88)90066-X |
0.413 |
|
1988 |
Shivpuri R, Raghupathi PS, Altan T. Characteristics of forming presses and recent developments for precision and net shape forming Journal of Materials Shaping Technology. 5: 259-267. DOI: 10.1007/Bf02836006 |
0.383 |
|
1988 |
Tang J, Oh S, Altan T, Miller RA. A knowledge based approach to automate forging design Journal of Materials Shaping Technology. 6: 7-17. DOI: 10.1007/Bf02833579 |
0.334 |
|
1988 |
Sitaraman SK, Kinzel GL, Altan T. Finite-difference method for rigid-plastic analysis of sheet metal stretching American Society of Mechanical Engineers, Production Engineering Division (Publication) Ped. 32: 167-183. |
0.326 |
|
1988 |
Sitaraman SK, Kinzel GL, Altan T. Finite-difference method for rigid-plastic analysis of sheet metal stretching American Society of Mechanical Engineers, Production Engineering Division (Publication) Ped. 32: 167-183. |
0.326 |
|
1987 |
Park JJ, Oh SI, Altan T. ANALYSES OF AXISYMMETRIC SHEET FORMING PROCESSES BY RIGID-VISCOPLASTIC FINITE ELEMENT METHOD Journal of Engineering For Industry. 109: 347-354. DOI: 10.1115/1.3187138 |
0.398 |
|
1987 |
Altan T. Design and Manufacture of Dies and Molds Cirp Annals - Manufacturing Technology. 36: 455-462. DOI: 10.1016/S0007-8506(07)60747-1 |
0.422 |
|
1987 |
Sevenler K, Raghupathi PS, Altan T. Forming-sequence design for multistage cold forging Journal of Mechanical Working Technology. 14: 121-135. DOI: 10.1016/0378-3804(87)90055-6 |
0.351 |
|
1985 |
Badawy AA, Raghupathi PS, Kuhlmann DJ, Altan T. Computer-aided design of multistage forging operations for round parts Journal of Mechanical Working Technology. 11: 259-274. DOI: 10.1016/0378-3804(85)90001-4 |
0.402 |
|
1984 |
Gunasekera JS, Gegel HL, Doraivelu SM, Malas JC, Graham JC, Altan T. Computer Aided Design of “Multi-Holed”, Streamlined Extrusion Dies Cirp Annals. 33: 129-131. DOI: 10.1016/S0007-8506(07)61394-8 |
0.347 |
|
1984 |
Ficke JA, Oh SI, Altan T. Use of Electronic Geometry Transfer and FEM Simulation in the Design of Hot Forming Dies for a Gear Blank Cirp Annals - Manufacturing Technology. 33: 123-127. DOI: 10.1016/S0007-8506(07)61393-6 |
0.423 |
|
1984 |
Wu WT, Oh SI, Altan T. INVESTIGATION OF DEFECT FORMATION IN RIB-WEB TYPE FORGING BY 'ALPID' Manufacturing Engineering Transactions. 159-165. |
0.303 |
|
1983 |
Oh SI, Park JJ, Kobayashi S, Altan T. Application of FEM Modeling to Simulate Metal Flow in Forging a Titanium Alloy Engine Disk Journal of Engineering For Industry. 105: 251-258. DOI: 10.1115/1.3185895 |
0.34 |
|
1982 |
Subramanian TL, Nagpal V, Altan T. COMPUTER-AIDED MODELING OF SELECTED SHEET METAL FORMING PROCESS Astm Special Technical Publication. 263-278. DOI: 10.1520/Stp28399S |
0.444 |
|
1982 |
Sabroff AM, Douglas JR, Badawy A, Altan T. Application of CAD/CAM Techniques to Close Tolerance Forging of Spiral Bevel Gears Cirp Annals - Manufacturing Technology. 31: 141-144. DOI: 10.1016/S0007-8506(07)63285-5 |
0.435 |
|
1982 |
Gunasekera JS, Gegel HL, Malas JC, Doraivelu SM, Morgan JT, Altan T. Computer-Aided Process Modelling of Hot Forging and Extrusion of Aluminum Alloys Cirp Annals. 31: 131-135. DOI: 10.1016/S0007-8506(07)63283-1 |
0.403 |
|
1982 |
Oh SI, Lahoti GD, Altan T. Application of a rigid-plastic finite-element method to some metalforming operations Journal of Mechanical Working Technology. 6: 277-290. DOI: 10.1016/0378-3804(82)90028-6 |
0.462 |
|
1982 |
Altan T. Computer aided design and manufacturing (CAD/CAM) of hot forging dies Journal of Applied Metalworking. 2: 77-85. DOI: 10.1007/Bf02834204 |
0.397 |
|
1981 |
Altan T, Semiatin SL, Lahoti GD. Determination of Flow Stress Data for Practical Metal Forming Analysis Cirp Annals - Manufacturing Technology. 30: 129-134. DOI: 10.1016/S0007-8506(07)60909-3 |
0.366 |
|
1980 |
Duncan JL, Altan T. New Directions in Sheet Metal Forming Research Cirp Annals - Manufacturing Technology. 29: 153-156. DOI: 10.1016/S0007-8506(07)61313-4 |
0.4 |
|
1980 |
Lahoti GD, Akgerman N, Oh SI, Altan T. Computer-aided analysis of metal flow and stresses in plate rolling Journal of Mechanical Working Technology. 4: 105-119. DOI: 10.1016/0378-3804(80)90029-7 |
0.411 |
|
1980 |
Subramanian TL, Altan T. A practical method for estimating forging loads with the use of a programmable calculator Journal of Applied Metalworking. 1: 60-68. DOI: 10.1007/Bf02833610 |
0.335 |
|
1979 |
Nagpal V, Billhardt CF, Altan T. LUBRICATED EXTRUSION OF ″T″ SECTIONS FROM ALUMINUM, TITANIUM AND STEEL USING COMPUTER-AIDED TECHNIQUES Journal of Engineering For Industry. 101: 319-325. DOI: 10.1115/1.3439513 |
0.4 |
|
1979 |
Subramanian TL, Akgerman N, Altan T. APPLICATION OF INTERACTIVE GRAPHICS IN CAD/CAM FOR SOME METAL FORMING PROCESSES AND TOOLING Iee Conference Publication. 57-69. |
0.362 |
|
1978 |
Nagpal V, Lahoti GD, Altan T. NUMERICAL METHOD FOR SIMULTANEOUS PREDICTION OF METAL FLOW AND TEMPERATURES IN UPSET FORGING OF RINGS J Eng Ind Trans Asme. 100: 413-420. DOI: 10.1115/1.3439455 |
0.323 |
|
1978 |
Lahoti GD, Shah SN, Altan T. COMPUTER AIDED ANALYSIS OF THE DEFORMATIONS AND TEMPERATURE IN STRIP ROLLING J Eng Ind Trans Asme. 100: 159-166. DOI: 10.1115/1.3439404 |
0.309 |
|
1978 |
Altan T, Lahoti GD, Nagpal V. Systems approach in massive forming and application to modeling of forging processes Journal of Applied Metalworking. 1: 29-40. DOI: 10.1007/Bf02833957 |
0.377 |
|
1978 |
Lahoti GD, Subramanian TL, Altan T. COMPUTER-AIDED PREDICTION OF METAL FLOW, TEMPERATURES AND FORMING LOAD IN SELECTED METAL-FORMING PROCESSES American Society of Mechanical Engineers, Applied Mechanics Division, Amd. 28: 183-195. |
0.321 |
|
1977 |
Lahoti GD, Liuzzi L, Altan T. Design of dies for radial forging of rods and tubes Journal of Mechanical Working Technology. 1: 99-109. DOI: 10.1016/0378-3804(77)90016-X |
0.495 |
|
1977 |
Nagpal V, Altan T, Gagne R. Computer-aided design and manufacturing of dies for lubricated extrusion of shapes Journal of Mechanical Working Technology. 1: 183-201. DOI: 10.1016/0378-3804(77)90005-5 |
0.435 |
|
1975 |
Akgerman N, Altan T. APPLICATION OF CAD/CAM IN FORGING TURBINE AND COMPRESSOR BLADES American Society of Mechanical Engineers (Paper). DOI: 10.1115/1.3446165 |
0.375 |
|
1975 |
Lahoti GD, Altan T. ANALYSIS OF THE RADIAL FORGING PROCESS FOR MANUFACTURING RODS AND TUBES American Society of Mechanical Engineers (Paper). DOI: 10.1115/1.3438830 |
0.412 |
|
1974 |
Lahoti GD, Altan T. PREDICTION OF TEMPERATURE DISTRIBUTIONS IN AXISYMMETRIC COMPRESSION AND TORSION American Society of Mechanical Engineers (Paper). DOI: 10.1115/1.3443270 |
0.342 |
|
1973 |
Altan T, Boulger FW. FLOW STRESS OF METALS AND ITS APPLICATION IN METAL FORMING ANALYSES Asme Pap. DOI: 10.1115/1.3438245 |
0.353 |
|
1970 |
Altan T, Henning HJ, Sabroff AM. The Use Of Model Materials In Predicting Forming Loads In Metalworking Journal of Engineering For Industry. 92: 444-451. DOI: 10.1115/1.3427776 |
0.367 |
|
1970 |
Akgerman N, Lahoti GD, Altan T. Computer-aided roll pass design in rolling of airfoil shapes Journal of Applied Metalworking. 1: 30-40. DOI: 10.1007/Bf02833903 |
0.431 |
|
Show low-probability matches. |