| Year |
Citation |
Score |
| 2021 |
Arafat ME, Al Badour F, Merah N. Fully coupled thermo-mechanical finite element modeling of friction stir processing of super duplex stainless steel The International Journal of Advanced Manufacturing Technology. 112: 3485-3500. DOI: 10.1007/S00170-020-06574-2 |
0.338 |
|
| 2020 |
Al-Badour FA, Adesina AY, Ibrahim AB, Suleiman RK, Merah N, Sorour AA. Electrochemical Investigation of the Effect of Process Parameters on the Corrosion Behavior of Aluminum-Cladded Pressure Vessel Steel Using a Friction Stir Diffusion Cladding Process Metals. 10: 623. DOI: 10.3390/met10050623 |
0.321 |
|
| 2020 |
Abubaker HM, Merah N, Al-Badour FA, Albinmousa J, Sorour AA. Influence of Friction Stir Processing on Mechanical Behavior of 2507 SDSS Metals. 10: 369. DOI: 10.3390/met10030369 |
0.342 |
|
| 2019 |
Albinmousa J, Adinoyi MJ, Merah N. Multiaxial fatigue of extruded ZK60 magnesium alloy Fatigue & Fracture of Engineering Materials & Structures. 42: 2276-2289. DOI: 10.1111/Ffe.13048 |
0.38 |
|
| 2019 |
Tuffaha M, Bazoune A, Al-Badour F, Merah N, Shuaib A. Dynamic Modeling and Analysis of a Horizontal Operating 3-Axis Machine for Friction Stir Welding Ieee Access. 7: 129874-129882. DOI: 10.1109/Access.2019.2939300 |
0.714 |
|
| 2019 |
Adinoyi MJ, Merah N, Albinmousa J. Strain-controlled fatigue and fracture of AISI 410 stainless steel Engineering Failure Analysis. 106: 104166. DOI: 10.1016/J.Engfailanal.2019.104166 |
0.377 |
|
| 2019 |
Mahgoub A, Bazoune A, Merah N, Al-Badour F, Shuaib A. Effect of Welding Parameters on the Mechanical and Metallurgical Properties of Friction Stir Spot Welding of Copper Lap Joint Arabian Journal For Science and Engineering. 44: 1283-1292. DOI: 10.1007/S13369-018-3472-Z |
0.768 |
|
| 2019 |
Iqbal Z, Bazoune A, Al-Badour F, Shuaib A, Merah N. Effect of Tool Rotational Speed on Friction Stir Welding of ASTM A516-70 Steel Using W–25%Re Alloy Tool Arabian Journal For Science and Engineering. 44: 1233-1242. DOI: 10.1007/S13369-018-3452-3 |
0.765 |
|
| 2018 |
Ibrahim AB, Al-Badour FA, Adesina AY, Merah N. Effect of process parameters on microstructural and mechanical properties of friction stir diffusion cladded ASTM A516-70 steel using 5052 Al alloy Journal of Manufacturing Processes. 34: 451-462. DOI: 10.1016/J.Jmapro.2018.06.020 |
0.76 |
|
| 2018 |
Adinoyi MJ, Merah N, Albinmousa J. Shear fatigue behavior of AW2099-T83 aluminum-lithium alloy International Journal of Fatigue. 117: 101-110. DOI: 10.1016/J.Ijfatigue.2018.07.028 |
0.389 |
|
| 2017 |
Iqbal Z, Merah N, Nouari S, Shuaib AR, Al-Aqeeli N. Investigation of wear characteristics of spark plasma sintered W-25wt%Re alloy and W-25wt%Re-3.2wt%HfC composite Tribology International. 116: 129-137. DOI: 10.1016/J.Triboint.2017.06.042 |
0.368 |
|
| 2017 |
Rafiq A, Merah N, Boukhili R, Al-Qadhi M. Impact resistance of hybrid glass fiber reinforced epoxy/nanoclay composite Polymer Testing. 57: 1-11. DOI: 10.1016/J.Polymertesting.2016.11.005 |
0.317 |
|
| 2016 |
Alshahrani RF, Merah N, Khan SMA, Al-Nassar Y. On the impact-induced damage in glass fiber reinforced epoxy pipes International Journal of Impact Engineering. 97: 57-65. DOI: 10.1016/J.Ijimpeng.2016.06.002 |
0.348 |
|
| 2016 |
bin Ali A, Mohammed AS, Merah N. Tribological investigations of UHMWPE nanocomposites reinforced with three different organo-modified clays Polymer Composites. DOI: 10.1002/Pc.24186 |
0.302 |
|
| 2015 |
Ali Y, Al-Qadhi M, Merah N, Rafiq A. Influence of degassing and nanoclay loading on physical and flexural properties of epoxy Defect and Diffusion Forum. 365: 237-243. DOI: 10.4028/Www.Scientific.Net/Ddf.365.237 |
0.356 |
|
| 2015 |
Shuaib AR, Al-Badour F, Merah N. Friction stir seal welding (FSSW) tube-tubesheet joints made of steel American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) Pvp. 6. DOI: 10.1115/PVP201545550 |
0.48 |
|
| 2015 |
Al-Badour FA, Merah N, Shuaib A, Bazoune A. Experimental investigation of friction stir seal welding of tube-tubesheet joints Journal of Pressure Vessel Technology, Transactions of the Asme. 137. DOI: 10.1115/1.4027807 |
0.783 |
|
| 2015 |
Nateche T, Hadj Meliani M, Khan SMA, Matvienko YG, Merah N, Pluvinage G. Residual harmfulness of a defect after repairing by a composite patch Engineering Failure Analysis. 48: 166-173. DOI: 10.1016/J.Engfailanal.2014.11.010 |
0.34 |
|
| 2014 |
Rafiq A, Al-Qadhi M, Merah N, Ali Y. Mechanical behavior of hybrid glass Fibre/Epoxy Clay nanocomposites Advanced Materials Research. 894: 336-341. DOI: 10.4028/Www.Scientific.Net/Amr.894.336 |
0.317 |
|
| 2014 |
Meriem-Benziane M, Abdul-Wahab SA, Merah N, Babaziane B. Numerical analysis of the performances of bonded composite repair with adhesive band in pipeline API X65 Advanced Materials Research. 875: 1101-1105. DOI: 10.4028/Www.Scientific.Net/Amr.875-877.1101 |
0.389 |
|
| 2014 |
Gordon S, Boukhili R, Merah N. Impact behavior and finite element prediction of the compression after impact strength of foam/vinylester-glass composite sandwiches Journal of Sandwich Structures and Materials. 16: 551-574. DOI: 10.1177/1099636214541575 |
0.359 |
|
| 2014 |
Al-Badour FA, Merah N, Shuaib A, Bazoune A. Residual stresses in friction stir welded tube-tubesheet joint American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) Pvp. 6. DOI: 10.1115/PVP2014-28488 |
0.753 |
|
| 2014 |
Iqbal Z, Shuaib AR, Al-Badour F, Merah N, Bazoune A. Experimental evaluation of wear features of W-25%RE pin tool used in friction stir welding mild steel Asme International Mechanical Engineering Congress and Exposition, Proceedings (Imece). 2. DOI: 10.1115/IMECE2014-38916 |
0.483 |
|
| 2014 |
Karrar G, Shuaib AN, Al-Badour FA, Merah N, Mahgoub AK. Friction stir butt welding of commercially pure copper plates Asme International Mechanical Engineering Congress and Exposition, Proceedings (Imece). 2. DOI: 10.1115/IMECE2014-38378 |
0.789 |
|
| 2014 |
Iqbal Z, Shuaib AN, Al-Badour F, Merah N, Bazoune A. Microstructure and hardness of friction stir weld bead on steel plate using W-25%Re Pin tool Asme 2014 12th Biennial Conference On Engineering Systems Design and Analysis, Esda 2014. 3. DOI: 10.1115/ESDA2014-20546 |
0.471 |
|
| 2014 |
Al-Badour F, Merah N, Shuaib A, Bazoune A. Thermo-mechanical finite element model of friction stir welding of dissimilar alloys International Journal of Advanced Manufacturing Technology. 72: 607-617. DOI: 10.1007/S00170-014-5680-3 |
0.772 |
|
| 2013 |
Merah N, Al-Qadhi M. Effects of processing techniques on morphology and mechanical properties of epoxy-clay nanocomposites Advanced Materials Research. 652: 167-174. DOI: 10.4028/Www.Scientific.Net/Amr.652-654.167 |
0.304 |
|
| 2013 |
Al-Badour FA, Merah N, Shuaib A, Bazoune A. Experimental investigation of friction stir seal welding of tubetubesheet joints American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) Pvp. 6. DOI: 10.1115/PVP2013-97762 |
0.778 |
|
| 2013 |
Al-Badour F, Merah N, Shuaib A, Bazoune A. Coupled Eulerian Lagrangian finite element modeling of friction stir welding processes Journal of Materials Processing Technology. 213: 1433-1439. DOI: 10.1016/J.Jmatprotec.2013.02.014 |
0.777 |
|
| 2013 |
Khan SMA, Merah N, Adinoyi MJ. 3D effects on crack front core regions, stress intensity factors and crack initiation angles International Journal of Solids and Structures. 50: 1449-1459. DOI: 10.1016/J.Ijsolstr.2013.01.019 |
0.352 |
|
| 2013 |
Al-Qadhi M, Merah N, Gasem ZM. Mechanical properties and water uptake of epoxy-clay nanocomposites containing different clay loadings Journal of Materials Science. 48: 3798-3804. DOI: 10.1007/S10853-013-7180-5 |
0.318 |
|
| 2012 |
Al-Badour F, Merah N, Shuaib AN, Bazoune A. Experimental and finite element modeling of friction stir seal welding of tube-tubesheet joint Advanced Materials Research. 445: 771-776. DOI: 10.4028/Www.Scientific.Net/Amr.445.771 |
0.789 |
|
| 2011 |
Shuaib AN, Duffuaa OM, Merah N, Al-Nassar Y. Residual stresses in roller expanded tube-tubesheet joints with large initial clearance and grooves Journal of Pressure Vessel Technology, Transactions of the Asme. 133. DOI: 10.1115/1.4003465 |
0.325 |
|
| 2011 |
Albinmousa J, Merah N, Khan SMA. A model for calculating geometry factors for a mixed-mode I-II single edge notched tension specimen Engineering Fracture Mechanics. 78: 3300-3307. DOI: 10.1016/J.Engfracmech.2011.09.005 |
0.342 |
|
| 2010 |
Merah N, Nizamuddin S, Khan Z, Al-Sulaiman F, Mehdi M. Effects of harsh weather and seawater on glass fiber reinforced epoxy composite Journal of Reinforced Plastics and Composites. 29: 3104-3110. DOI: 10.1177/0731684410366172 |
0.327 |
|
| 2010 |
Al-Aboodi A, Merah N, Shuaib AN, Al-Nassar Y. Effects of friction on roller expanded tube-tubesheet joint strength International Journal of Material Forming. 3: 253-257. DOI: 10.1007/S12289-010-0686-3 |
0.475 |
|
| 2010 |
Merah N, Nizamuddin S, Khan Z, Al-Sulaiman F, Mehdi M. Natural weathering and sea water effects on the durability of glass fiber reinforced vinylester: Fractographic analysis Applied Composite Materials. 17: 363-372. DOI: 10.1007/S10443-010-9125-3 |
0.336 |
|
| 2009 |
Merah N, Albinmousa J. Experimental and numerical determination of mixed mode crack extension angle Journal of Testing and Evaluation. 37: 95-107. DOI: 10.1520/Jte101668 |
0.357 |
|
| 2009 |
Al-Aboodi AS, Merah N, Shuaib ARN, Al-Nassar Y. FE evaluation of effect of groove geometry on roller and hydraulically expanded joint strength International Journal of Precision Technology. 1: 201. DOI: 10.1504/Ijptech.2009.026378 |
0.444 |
|
| 2009 |
Merah N, Al-Aboodi A, Shuaib AN, Al-Nassar Y, Al-Anizi SS. Combined effects of tube projection, initial tube-tubesheet clearance, and tube material strain hardening on rolled joint strength Journal of Pressure Vessel Technology, Transactions of the Asme. 131. DOI: 10.1115/1.3142387 |
0.41 |
|
| 2008 |
Khan Z, Al-Habib F, Merah N, Allam I. The effect of thermal ageing on the microstructure and fatigue strength of alloy 800HT International Journal of Microstructure and Materials Properties. 3: 616-629. DOI: 10.1504/Ijmmp.2008.022040 |
0.347 |
|
| 2008 |
Merah N, Al-Qahtani T, Khan Z. Effects of strain rate and temperature on tensile properties of CPVC pipe material Plastics, Rubber and Composites. 37: 353-358. DOI: 10.1179/174328908X314352 |
0.37 |
|
| 2008 |
Al-Aboodi A, Merah N, Shuaib AR, Al-Nassar Y, Al-Anizi SS. Modeling the effects of initial tube-tubesheet clearance, wall reduction and material strain hardening on rolled joint strength Journal of Pressure Vessel Technology, Transactions of the Asme. 130: 0412041-0412046. DOI: 10.1115/1.2967809 |
0.418 |
|
| 2008 |
Shuaib AN, Merah N, Ahmed M, Al-Nassar YN, Al-Anizi SS. Integrity of roller-expanded tube-to-tubesheet joints with overenlarged tubesheet holes Journal of Pressure Vessel Technology, Transactions of the Asme. 130: 0112031-0112036. DOI: 10.1115/1.2826429 |
0.445 |
|
| 2007 |
Merah N. Natural weathering effects on some properties of CPVC pipe material Journal of Materials Processing Technology. 191: 198-201. DOI: 10.1016/J.Jmatprotec.2007.03.031 |
0.354 |
|
| 2006 |
Merah N, Saghir F, Khan Z, Bazoune A. Effect of temperature on tensile properties of HDPE pipe material Plastics, Rubber and Composites. 35: 226-230. DOI: 10.1179/174328906X103178 |
0.371 |
|
| 2006 |
Shuaib AN, Merah N, Ahmed M, Al-Nassar YN, Al-Anizi SS. Integrity of roller expanded tube-to-tubesheet joints with over-enlarged tubesheet holes American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) Pvp. 2006. DOI: 10.1115/PVP2006-ICPVT-11-93296 |
0.344 |
|
| 2006 |
Al-Aboodi A, Merah N, Shuaib AR, Al-Nassar Y, Al-Anizi SS. FEA of the effects of initial tube-tubesheet clearance, wall reduction and material strain hardening on rolled joint strength American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) Pvp. 2006. DOI: 10.1115/PVP2006-ICPVT-11-93202 |
0.301 |
|
| 2005 |
Merah N, Saghir F, Khan Z, Bazoune A. A study of frequency and temperature effects on fatigue crack growth resistance of CPVC Engineering Fracture Mechanics. 72: 1691-1701. DOI: 10.1016/J.Engfracmech.2004.12.002 |
0.359 |
|
| 2004 |
Merah N, Irfan-Ul-Haq M, Khan Z. Effects of injection molding weld on fatigue crack resistance of CPVC at different temperatures Journal of Materials Processing Technology. 155: 1261-1265. DOI: 10.1016/J.Jmatprotec.2004.04.257 |
0.462 |
|
| 2003 |
Shuaib AN, Merah N, Khraisheh MK, Allam IM, Al-Anizi SS. Experimental investigation of heat exchanger tubesheet hole enlargement Journal of Pressure Vessel Technology, Transactions of the Asme. 125: 19-25. DOI: 10.1115/1.1533799 |
0.421 |
|
| 2003 |
Merah N, Irfan-ul-Haq M, Khan Z. Temperature and weld-line effects on mechanical properties of CPVC Journal of Materials Processing Technology. 142: 247-255. DOI: 10.1016/S0924-0136(03)00567-3 |
0.371 |
|
| 2003 |
Merah N, Al-Zayer A, Shuaib A, Arif A. Finite element evaluation of clearance effect on tube-to-tubesheet joint strength International Journal of Pressure Vessels and Piping. 80: 879-885. DOI: 10.1016/J.Ijpvp.2003.08.007 |
0.458 |
|
| 2002 |
Khan R, Khan Z, Al-Sulaiman F, Merah N. Fatigue life estimates in woven carbon fabric/epoxy composites at non-ambient temperatures Journal of Composite Materials. 36: 2517-2536. DOI: 10.1177/002199802761405277 |
0.369 |
|
| 2001 |
Merah N, Khan Z, Mezghani K, Budair MO, Younas M, Olabisi O. Fatigue crack propagation in weld zone of CPVC pipe fittings at different temperatures Journal of Polymer Engineering. 21: 521-542. DOI: 10.1515/Polyeng.2001.21.6.521 |
0.405 |
|
| 2000 |
Merah N. DC Potential Drop Calibration in Creep-Fatigue Loading Conditions Journal of Testing and Evaluation. 28: 301-306. DOI: 10.1520/Jte12108J |
0.393 |
|
| 2000 |
Merah N. Notch-strengthening phenomenon under creep-fatigue loading conditions Journal of Pressure Vessel Technology, Transactions of the Asme. 122: 15-21. DOI: 10.1115/1.556140 |
0.37 |
|
| 2000 |
Irfan-ul-Haq M, Merah N. Effect of temperature on fatigue crack growth in CPVC American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) Pvp. 430: 393-401. DOI: 10.1115/1.1523070 |
0.363 |
|
| 1999 |
Merah N, Bui-Quoc T, Bernard M. Notch and temperature effects on crack propagation in SS 304 under LCF conditions Journal of Pressure Vessel Technology, Transactions of the Asme. 121: 42-48. DOI: 10.1115/1.2883666 |
0.36 |
|
| 1999 |
Merah N, Bui-Quoc T, Bernard M. Creep-fatigue crack growth in notched SS-304 plates at 600°C Engineering Fracture Mechanics. 63: 39-55. DOI: 10.1016/S0013-7944(99)00004-1 |
0.344 |
|
| 1995 |
Merah N, Bui-Quoc T, Bernard M. Calibration of DC potential technique using an optical image processing system in LCF testing Journal of Testing and Evaluation. 23: 160-167. DOI: 10.1520/Jte10405J |
0.374 |
|
| 1994 |
Merah N, Bui-Quoc T, Bernard M. Kt-based method for calculating LCF life of notched specimens Journal of Pressure Vessel Technology, Transactions of the Asme. 116: 403-408. DOI: 10.1115/1.2929608 |
0.355 |
|
| 1994 |
Ranganathan N, Jendoubi K, Merah N. Experimental characterization of the elastic-plastic strain fields at the crack tip due to cyclic loading Journal of Engineering Materials and Technology, Transactions of the Asme. 116: 187-192. DOI: 10.1115/1.2904271 |
0.392 |
|
| 1991 |
Jendoubi K, Ranganathan N, Merah N. Effect of Thickness on Elasto-Plastic Deformation and Hysteretic Energy Dissipated at Crack Tip Journal of Testing and Evaluation. 19: 201-209. DOI: 10.1520/Jte12557J |
0.397 |
|
| 1982 |
Shadley JR, Merah N, Rybicki EF. The Effect of Induction Heating Stress Remedies on Existing Flaws in Pipes Journal of Pressure Vessel Technology-Transactions of the Asme. 104: 193-197. DOI: 10.1115/1.3264203 |
0.42 |
|
| Show low-probability matches. |