☰

Leijun Li - Publications

Affiliations: 
Mechanical Engineering Utah State University, Logan, UT, United States 
Area:
Mechanical Engineering
Tree Info Similar researchers PubMed Report error

44 high-probability publications. We are testing a new system for linking publications to authors. You can help! If you notice any inaccuracies, please sign in and mark papers as correct or incorrect matches. If you identify any major omissions or other inaccuracies in the publication list, please let us know.

Year Citation  Score
2024 Li J, Yu P, Saini N, Li L. Crack-Tip Opening Displacement of Girth Welds in a Lean X70 Pipeline Steel. Materials (Basel, Switzerland). 17. PMID 38255559 DOI: 10.3390/ma17020391  0.322
2021 Shi M, Di M, Zhang J, Kannan R, Li J, Yuan X, Li L. Effect of Initial Microstructure on the Toughness of Coarse-Grained Heat-Affected Zone in a Microalloyed Steel. Materials (Basel, Switzerland). 14. PMID 34443282 DOI: 10.3390/ma14164760  0.311
2020 Saini N, Mulik RS, Mahapatra MM, Sharma NK, Li L. Dissolution of laves phase by re-austenitization and tempering of creep strength enhanced ferritic steel Materials Science and Technology. 36: 631-644. DOI: 10.1080/02670836.2020.1724404  0.348
2020 Saini N, Mulik RS, Mahapatra MM, Kannan R, Sharma NK, Li L. Dissolution of δ-ferrite and its effect on mechanical properties of P92 steel welds Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 796: 139370. DOI: 10.1016/J.Msea.2020.139370  0.418
2020 Li J, Kannan R, Shi M, Lyu Z, Li L. Viability of button melting for accelerated development of chromium carbide overlay Materials Letters. 278: 128455. DOI: 10.1016/J.Matlet.2020.128455  0.424
2020 Wang Y, Kannan R, Li L. Insight into Type IV cracking in Grade 91 steel weldments Materials & Design. 190: 108570. DOI: 10.1016/J.Matdes.2020.108570  0.46
2020 Unsworth D, Driver RG, Li L. Measurement and prediction of residual stresses in welded girders Journal of Constructional Steel Research. 169: 106007. DOI: 10.1016/J.Jcsr.2020.106007  0.414
2020 Li J, Kannan R, Shi M, Li L. Solidified Microstructure of Wear-Resistant Fe-Cr-C-B Overlays Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science. 51: 1291-1300. DOI: 10.1007/S11663-020-01863-3  0.355
2019 Huda N, Wang Y, Li L, Gerlich AP. Effect of martensite-austenite (MA) distribution on mechanical properties of inter-critical Reheated Coarse Grain heat affected zone in X80 linepipe steel Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 765: 138301. DOI: 10.1016/J.Msea.2019.138301  0.43
2019 Liu D, Wang J, Zhang Y, Kannan R, Long W, Wu M, Wang Y, Li L. Effect of Mo on microstructure and wear resistance of slag-free self-shielded metal-cored welding overlay Journal of Materials Processing Technology. 270: 82-91. DOI: 10.1016/J.Jmatprotec.2019.02.024  0.367
2019 Liu D, Long W, Wu M, Li L, Wang J, Zhang Y. Microstructure and Wear Performance of Cobalt-Containing Iron-Based Slag-Free Self-shielded Flux-Cored Wire Journal of Materials Engineering and Performance. 28: 2158-2166. DOI: 10.1007/S11665-019-04002-5  0.331
2019 Shi M, Kannan R, Zhang J, Yuan X, Li L. Effect of Zr Microalloying on Austenite Grain Size of Low-Carbon Steels Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science. 50: 2574-2585. DOI: 10.1007/S11663-019-01701-1  0.41
2019 Li Y, Qin F, Liu C, Li L, Zhao X, Wu Z. Influence of Annealing Treatment on Microstructure Evolution and Mechanical Property of Friction Stir Weld AZ31 Mg Alloys Journal of Wuhan University of Technology-Materials Science Edition. 34: 417-425. DOI: 10.1007/S11595-019-2068-0  0.414
2018 Kannan R, Wang Y, Bannister R, Rashid M, Li L. Homogenisation of austenite during non-equilibrium heating in hypereutectoid steels Materials Science and Technology. 34: 2271-2286. DOI: 10.1080/02670836.2018.1530422  0.324
2018 Liu D, Wu M, Long W, Li L, Wei P. Effect of simultaneous addition of ferroniobium and ferrotitanium on properties of hardfacing Materials Science and Technology. 34: 2231-2240. DOI: 10.1080/02670836.2018.1524053  0.323
2018 Wang Y, Park D, Li L. Microstructural analysis of fracture in heat-affected zone of two ×70 pipeline steel weldments Canadian Metallurgical Quarterly. 57: 129-139. DOI: 10.1080/00084433.2017.1390643  0.415
2018 Wang Y, Li L, Kannan R. Transition from Type IV to Type I cracking in heat-treated grade 91 steel weldments Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 714: 1-13. DOI: 10.1016/J.Msea.2017.12.088  0.421
2018 Wang Y, Kannan R, Li L, Suzuk Y, Ting D, Yuen S, Garcia M. Jagged cracking in the heat-affected zone of weld overlay on coke drum cladding Engineering Failure Analysis. 85: 14-25. DOI: 10.1016/J.Engfailanal.2017.12.006  0.47
2018 Li Y, Qin F, Liu C, Li L, Wu Z. Influence of Rotation Rate on Microstructure and Comprehensive Performance of FSWed Mg Alloy Journal of Materials Engineering and Performance. 27: 5635-5643. DOI: 10.1007/S11665-018-3704-0  0.401
2018 Wang Y, Kannan R, Li L. Correlation Between Intercritical Heat-Affected Zone and Type IV Creep Damage Zone in Grade 91 Steel Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 49: 1264-1275. DOI: 10.1007/S11661-018-4490-X  0.454
2017 DiGiovanni C, Li L, Driver R, Callele L. Cracking in welded steel platform structures during hot-dip galvanization Engineering Failure Analysis. 79: 1031-1042. DOI: 10.1016/J.Engfailanal.2017.06.021  0.406
2017 Wu M, Liu F, Pu J, Anderson NE, Li L, Liu D. The Microstructure and Pitting Resistance of Weld Joints of 2205 Duplex Stainless Steel Journal of Materials Engineering and Performance. 26: 5341-5347. DOI: 10.1007/S11665-017-2976-0  0.423
2017 Kannan R, Wang Y, Li L. Microstructural Evolution of Inverse Bainite in a Hypereutectoid Low-Alloy Steel Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 48: 6038-6054. DOI: 10.1007/S11661-017-4373-6  0.314
2017 Park D, Amirkhiz BS, Gravel J, Wang Y, Li L, Zavadil R, Liang J, Liu P, He A, Arafin M. Effects of Heat-Affected Zone Microstructure on Fracture Toughness of Two X70 Pipe Girth Welds Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 48: 3248-3260. DOI: 10.1007/S11661-017-4100-3  0.422
2017 Kannan R, Wang Y, Li L. Identification of Inverse Bainite in Fe-0.84C-1Cr-1Mn Hypereutectoid Low Alloy Steel Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 48: 948-952. DOI: 10.1007/S11661-016-3924-6  0.301
2016 Wang Y, Kannan R, Li L. Characterization of as-welded microstructure of heat-affected zone in modified 9Cr–1Mo–V–Nb steel weldment Materials Characterization. 118: 225-234. DOI: 10.1016/J.Matchar.2016.05.024  0.432
2016 Li L, Silwal B, Deceuster A. Creep rates of heat-affected zone of grade 91 pipe welds as determined by stress-relaxation test International Journal of Pressure Vessels and Piping. 146: 95-103. DOI: 10.1016/J.Ijpvp.2016.07.008  0.674
2016 Carvalho MC, Wang Y, Souza JAS, Braga EM, Li L. Characterization of phases and defects in chromium carbide overlays deposited by SAW process Engineering Failure Analysis. 60: 374-382. DOI: 10.1016/J.Engfailanal.2015.11.058  0.361
2016 Wang Y, Kannan R, Li L. Identification and Characterization of Intercritical Heat-Affected Zone in As-Welded Grade 91 Weldment Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 47: 5680-5684. DOI: 10.1007/S11661-016-3736-8  0.42
2016 Wang Y, Rao M, Li L, Luo G, Shen Q, Zhang L. Accelerated Bonding of Magnesium and Aluminum with a CuNi/Ag/CuNi Sandwich Interlayer by Plasma-Activated Sintering Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 47: 631-636. DOI: 10.1007/S11661-015-3223-7  0.33
2015 Chen H, Li L, Kemps R, Michielsen B, Jacobs M, Snijkers F, Middelkoop V. Reactive air brazing for sealing mixed ionic electronic conducting hollow fibre membranes Acta Materialia. 88: 74-82. DOI: 10.1016/J.Actamat.2015.01.029  0.331
2014 Xu P, Li L, Zhang C(. Microstructure characterization of laser welded Ti-6Al-4V fusion zones Materials Characterization. 87: 179-185. DOI: 10.1016/J.Matchar.2013.11.005  0.43
2014 Wang Y, Luo G, Li L, Shen Q, Zhang L. Formation of intermetallic compounds in Mg–Ag–Al joints during diffusion bonding Journal of Materials Science. 49: 7298-7308. DOI: 10.1007/S10853-014-8440-8  0.332
2012 Zhang C(, Kallam R, Deceuster A, Dasu A, Li L. A thermal-mechanical coupled finite element model with experimental temperature verification for vertically stacked FPGAs Microelectronic Engineering. 91: 24-32. DOI: 10.1016/J.Mee.2011.11.011  0.711
2012 Li L, Deceuster A, Zhang C. Effect of Process Parameters on Pulsed-Laser Repair of a Directionally Solidified Superalloy Metallography, Microstructure, and Analysis. 1: 92-98. DOI: 10.1007/S13632-012-0016-X  0.724
2011 Zhang C(, Li L, Deceuster A. Thermomechanical analysis of multi-bead pulsed laser powder deposition of a nickel-based superalloy Journal of Materials Processing Technology. 211: 1478-1487. DOI: 10.1016/J.Jmatprotec.2011.03.023  0.741
2010 Zhang CS, Li L. Effect of substrate dimensions on dynamics of ultrasonic consolidation. Ultrasonics. 50: 811-23. PMID 20605182 DOI: 10.1016/J.Ultras.2010.04.005  0.33
2009 Chen H, Li L, Yu W. Multiscale finite element analysis of bulk nano-particle fabrication by a mechanical method Journal of Materials Processing Technology. 209: 4243-4247. DOI: 10.1016/J.Jmatprotec.2008.11.008  0.306
2009 Zhang C(, Deceuster A, Li L. A Method for Bond Strength Evaluation for Laminated Structures with Application to Ultrasonic Consolidation Journal of Materials Engineering and Performance. 18: 1124-1132. DOI: 10.1007/S11665-008-9342-1  0.691
2009 Zhang C(, Li L. A Coupled Thermal-Mechanical Analysis of Ultrasonic Bonding Mechanism Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science. 40: 196-207. DOI: 10.1007/S11663-008-9224-9  0.435
2008 Zaveri N, Mahapatra M, Deceuster A, Peng Y, Li L, Zhou A. Corrosion resistance of pulsed laser-treated Ti–6Al–4V implant in simulated biofluids Electrochimica Acta. 53: 5022-5032. DOI: 10.1016/J.Electacta.2008.01.086  0.714
2006 Li L. Repair of directionally solidified superalloy GTD-111 by laser-engineered net shaping Journal of Materials Science. 41: 7886-7893. DOI: 10.1007/S10853-006-0948-0  0.368
2005 Li L, Orme K, Yu W. Effect of joint design on mechanical properties of AL7075 weldment Journal of Materials Engineering and Performance. 14: 322-326. DOI: 10.1361/10599490523940  0.382
2004 Li L. Failure analysis of aluminum alloy swing arm welded joints Journal of Failure Analysis and Prevention. 4: 52-57. DOI: 10.1007/S11668-996-0015-9  0.437
Show low-probability matches.