| Year |
Citation |
Score |
| 2022 |
Junaedi H, Baig M, Dawood A, Albahkali E, Almajid A. Effect of the Matrix Melt Flow Index and Fillers on Mechanical Properties of Polypropylene-Based Composites. Materials (Basel, Switzerland). 15. PMID 36363158 DOI: 10.3390/ma15217568 |
0.343 |
|
| 2020 |
Junaedi H, Baig M, Dawood A, Albahkali E, Almajid A. Mechanical and Physical Properties of Short Carbon Fiber and Nanofiller-Reinforced Polypropylene Hybrid Nanocomposites. Polymers. 12. PMID 33260431 DOI: 10.3390/polym12122851 |
0.319 |
|
| 2005 |
Kuga Y, Lee S-, Taya M, Almajid A, Lee S, Li J, Watanabe R. Experimental and numerical studies of dielectric properties of BaTiO/sub 3/-platinum composites at microwave frequencies Ieee Transactions On Dielectrics and Electrical Insulation. 12: 827-834. DOI: 10.1109/Tdei.2005.1511109 |
0.498 |
|
| 2003 |
Takagi K, Li JF, Watanabe R, Almajid AA, Taya M. Development of Piezoelectric Ceramic Actuators with Graded Porosity Materials Science Forum. 405-410. DOI: 10.4028/Www.Scientific.Net/Msf.423-425.405 |
0.555 |
|
| 2003 |
Li JF, Takagi K, Yokoyama S, Watanabe R, Almajid AA, Taya M. Piezoelectric Ceramic/Metal Bending Actuators with Functionally Graded Microstructures Materials Science Forum. 399-404. DOI: 10.4028/Www.Scientific.Net/Msf.423-425.399 |
0.521 |
|
| 2003 |
Li JF, Takagi K, Ono M, Pan W, Watanabe R, Almajid A, Taya M. Fabrication and Evaluation of Porous Piezoelectric Ceramics and Porosity-Graded Piezoelectric Actuators Journal of the American Ceramic Society. 86: 1094-1098. DOI: 10.1111/J.1151-2916.2003.Tb03430.X |
0.59 |
|
| 2003 |
Taya M, Almajid AA, Dunn M, Takahashi H. Design of bimorph piezo-composite actuators with functionally graded microstructure Sensors and Actuators, a: Physical. 107: 248-260. DOI: 10.1016/S0924-4247(03)00381-9 |
0.601 |
|
| 2002 |
Takagi K, Li JF, Yokoyama S, Watanabe R, Almajid A, Taya M. Design and fabrication of functionally graded PZT/Pt piezoelectric bimorph actuator Science and Technology of Advanced Materials. 3: 217-224. DOI: 10.1016/S1468-6996(02)00017-7 |
0.606 |
|
| 2001 |
Almajid AA, Taya M. 2D-Elasticity Analysis of FGM Piezo-Laminates Under Cylindrical Bending Journal of Intelligent Material Systems and Structures. 12: 341-351. DOI: 10.1106/La6T-Tej2-M3Gu-Xkpj |
0.568 |
|
| 2001 |
Almajid A, Taya M, Hudnut S. Analysis of out-of-plane displacement and stress field in a piezocomposite plate with functionally graded microstructure International Journal of Solids and Structures. 38: 3377-3391. DOI: 10.1016/S0020-7683(00)00264-X |
0.578 |
|
| 2001 |
Almajid AA, Taya M. 2D-elasticity analysis of FGM piezo-laminates under cylindrical bending Journal of Intelligent Material Systems and Structures. 12: 341-351. |
0.446 |
|
| Low-probability matches (unlikely to be authored by this person) |
| 2013 |
El-Danaf E, Baig M, Almajid A, Alshalfan W, Al-Mojil M, Al-Shahrani S. Mechanical, microstructure and texture characterization of API X65 steel Materials and Design. 47: 529-538. DOI: 10.1016/J.Matdes.2012.12.031 |
0.299 |
|
| 2021 |
Almajid A, Walter R, Kroos T, Junaedi H, Gurka M, Khalil KA. The Multiple Uses of Polypropylene/Polyethylene Terephthalate Microfibrillar Composite Structures to Support Waste Management-Composite Processing and Properties. Polymers. 13. PMID 33921061 DOI: 10.3390/polym13081296 |
0.286 |
|
| 2012 |
Khalil KA, Almajid AA. Effect of high-frequency induction heat sintering conditions on the microstructure and mechanical properties of nanostructured magnesium/hydroxyapatite nanocomposites Materials and Design. 36: 58-68. DOI: 10.1016/j.matdes.2011.11.008 |
0.272 |
|
| 2021 |
Almajid A, Walter R, Kroos T, Junaidi H, Gurka M, Abdelrazek Khalil K. Development of Polypropylene/Polyethylene Terephthalate Microfibrillar Composites Filament to Support Waste Management. Polymers. 13. PMID 33445424 DOI: 10.3390/polym13020233 |
0.264 |
|
| 2016 |
Meenashisundaram GK, Nai MH, Almajid A, Gupta M. Reinforcing Low-Volume Fraction Nano-TiN Particulates to Monolithical, Pure Mg for Enhanced Tensile and Compressive Response. Materials (Basel, Switzerland). 9. PMID 28773264 DOI: 10.3390/ma9030134 |
0.26 |
|
| 2014 |
Ahmad I, Islam M, Almajid AA, Yazdani B, Zhu Y. Investigation of yttria-doped alumina nanocomposites reinforced by multi-walled carbon nanotubes Ceramics International. 40: 9327-9335. DOI: 10.1016/j.ceramint.2014.01.156 |
0.258 |
|
| 2011 |
Soliman MS, El-Danaf EA, Almajid AA. Static and cyclic deformation of commercially pure Al processed by equal-channel angular pressing using two routes Materials Science Forum. 667: 833-838. DOI: 10.4028/www.scientific.net/MSF.667-669.833 |
0.256 |
|
| 2011 |
Latief FH, Sherif ESM, Almajid AA, Junaedi H. Fabrication of exfoliated graphite nanoplatelets-reinforced aluminum composites and evaluating their mechanical properties and corrosion behavior Journal of Analytical and Applied Pyrolysis. 92: 485-492. DOI: 10.1016/j.jaap.2011.09.003 |
0.252 |
|
| 2016 |
Junaedi H, Ibrahim MF, Ammar HR, Samuel AM, Soliman MS, Almajid AA, Samuel FH. Effect of testing temperature on the strength and fracture behavior of Al-B4C composites Journal of Composite Materials. 50: 2871-2880. DOI: 10.1177/0021998315613130 |
0.252 |
|
| 2012 |
Soliman MS, El-Danaf EA, Almajid AA. Enhancement of static and fatigue strength of 1050 Al processed by equal-channel angular pressing using two routes Materials Science and Engineering A. 532: 120-129. DOI: 10.1016/j.msea.2011.10.072 |
0.251 |
|
| 2012 |
Sherif ESM, Latief FH, Junaedi H, Almajid AA. Influence of exfoliated graphite nanoplatelets particles additions and sintering temperature on the mechanical properties of aluminum matrix composites International Journal of Electrochemical Science. 7: 4352-4361. |
0.247 |
|
| 2020 |
Almajid AA. Mechanical, Physical, and Wear Properties of 3D Printed Polyactic Acid Materials Key Engineering Materials. 833: 118-125. DOI: 10.4028/www.scientific.net/KEM.833.118 |
0.245 |
|
| 2015 |
Almajid A, Sorochynska L, Friedrich K, Wetzel B. Effects of graphene and CNT on mechanical, thermal, electrical and corrosion properties of vinylester based nanocomposites Plastics, Rubber and Composites. 44: 50-62. DOI: 10.1179/1743289814Y.0000000117 |
0.245 |
|
| 2007 |
El-Danaf EA, Soliman MS, Almajid AA, El-Rayes MM. Enhancement of mechanical properties and grain size refinement of commercial purity aluminum 1050 processed by ECAP Materials Science and Engineering A. 458: 226-234. DOI: 10.1016/j.msea.2006.12.077 |
0.244 |
|
| 2020 |
Junaedi H, Albahkali E, Baig M, Dawood A, Almajid A. Ductile to Brittle Transition of Short Carbon Fiber-Reinforced Polypropylene Composites Advances in Polymer Technology. 2020: 1-10. DOI: 10.1155/2020/6714097 |
0.243 |
|
| 2014 |
El-Danaf EA, Baig M, Almajid AA, Soliman MS. The fracture strength of cryomilled 99.7 Al nanopowders consolidated by high frequency induction sintering Iop Conference Series: Materials Science and Engineering. 63. DOI: 10.1088/1757-899X/63/1/012025 |
0.237 |
|
| 2013 |
Friedrich K, Almajid AA. Manufacturing aspects of advanced polymer composites for automotive applications Applied Composite Materials. 20: 107-128. DOI: 10.1007/s10443-012-9258-7 |
0.231 |
|
| 2011 |
El-Danaf EA, Soliman MS, AlMajid AA. Texture manipulation in commercial purity aluminum by deformation path change from ECAP to plane strain compression Materials Science Forum. 667: 445-450. DOI: 10.4028/www.scientific.net/MSF.667-669.445 |
0.223 |
|
| 2015 |
Junaedi H, Abdo HS, Khalil KA, Almajid AA. Aluminum-Carbon Metal Matrix Composites: Effect of Carbon Fiber and Aspect Ratio on the Mechanical Properties Advanced Materials Research. 1123: 119-122. DOI: 10.4028/WWW.SCIENTIFIC.NET/AMR.1123.119 |
0.219 |
|
| 2012 |
Soliman MS, El-Danaf EA, Almajid AA. Effect of equal-channel angular pressing process on properties of 1050 Al alloy Materials and Manufacturing Processes. 27: 746-750. DOI: 10.1080/10426914.2012.663150 |
0.219 |
|
| 2015 |
El Rayes MM, El-Danaf EA, Almajid AA. Characterization and correlation of mechanical, microstructural and ultrasonic properties of power plant steel Materials Characterization. 100: 120-134. DOI: 10.1016/j.matchar.2014.11.034 |
0.217 |
|
| 2010 |
El-Danaf EA, Soliman MS, Almajid AA. Effect of deformation path change on plastic response and texture evolution for 1050 Al pre-deformed by ECAP and subsequently plane strain compressed Materials Science and Engineering A. 527: 2547-2558. DOI: 10.1016/j.msea.2010.01.003 |
0.217 |
|
| 2014 |
Friedrich K, Almajid AA. Solid particle erosion of polymers and composites Aip Conference Proceedings. 1599: 2-5. DOI: 10.1063/1.4876762 |
0.216 |
|
| 2015 |
Baig M, El-Danaf E, Soliman M, Almajid A, Alshalfan W, Alhajeri K. Mechanical properties, microstructure and toughness assessment of a X70 pipeline steel Materials Testing-Materials and Components Technology and Application. DOI: 10.3139/120.110796 |
0.214 |
|
| 2013 |
Almajid A, Friedrich K, Noll A, Gyurova L. Poly-para-phenylene-copolymers (PPP) for extrusion and injection moulding. Part 2: Mechanical behaviour Plastics, Rubber and Composites. 42: 401-406. DOI: 10.1179/1743289813Y.0000000059 |
0.213 |
|
| 2013 |
Almajid A, Friedrich K, Noll A, Gyurova L. Poly-para-phenylene-copolymers (PPP) for extrusion and injection moulding: Part 1 - Molecular and rheological differences Plastics, Rubber and Composites. 42: 123-128. DOI: 10.1179/1743289812Y.0000000045 |
0.205 |
|
| 2021 |
Junaedi H, Baig M, Dawood A, Albahkali E, Almajid A. Modeling analysis of the tensile strength of polypropylene base Short Carbon Fiber reinforced composites Journal of Materials Research and Technology. 11: 1611-1621. DOI: 10.1016/J.JMRT.2021.02.010 |
0.202 |
|
| 2014 |
Almajid A, Friedrich K, Noll A, Gyurova L. Poly-para-phenylene-copolymers (PPPs). Part 3: Scratch and wear resistance Plastics, Rubber and Composites. 43: 138-144. DOI: 10.1179/1743289814Y.0000000077 |
0.198 |
|
| 2013 |
Friedrich K, Pei XQ, Almajid AA. Specific erosive wear rate of neat polymer films and various polymer composites Journal of Reinforced Plastics and Composites. 32: 631-643. DOI: 10.1177/0731684413478478 |
0.196 |
|
| 2018 |
Islam M, Khalid Y, Ahmad I, Almajid AA, Achour A, Dunn TJ, Akram A, Anwar S. Microstructural Evaluation of Inductively Sintered Aluminum Matrix Nanocomposites Reinforced with Silicon Carbide and/or Graphene Nanoplatelets for Tribological Applications Metallurgical and Materials Transactions A. 49: 2963-2976. DOI: 10.1007/s11661-018-4625-0 |
0.195 |
|
| 2015 |
El-Deen AG, Choi JH, Kim CS, Khalil KA, Almajid AA, Barakat NAM. TiO2 nanorod-intercalated reduced graphene oxide as high performance electrode material for membrane capacitive deionization Desalination. 361: 53-64. DOI: 10.1016/j.desal.2015.01.033 |
0.194 |
|
| 2018 |
Khan A, Baig M, AlMajid A. Effect of Transition Metals on Thermal Stability and Mechanical Properties of Aluminum International Journal of Materials, Mechanics and Manufacturing. 6: 369-372. DOI: 10.18178/Ijmmm.2018.6.6.409 |
0.193 |
|
| 2010 |
Soliman MS, EL-Danaf EA, Almajid AA. Effect of heat treatment conditions on the high temperature deformation of 6082-AL alloy Advanced Materials Research. 83: 407-414. DOI: 10.4028/www.scientific.net/AMR.83-86.407 |
0.189 |
|
| 2013 |
Friedrich K, Pei XQ, Almajid AA. Solid particle erosion of carbon fiber reinforced PEEK composites and possible protective polymeric films Tribologie Und Schmierungstechnik. 60: 5-13. |
0.189 |
|
| 2008 |
El-Danaf EA, Almajid AA, Soliman MS. Hot deformation of AA6082-T4 aluminum alloy Journal of Materials Science. 43: 6324-6330. DOI: 10.1007/s10853-008-2895-4 |
0.185 |
|
| 2012 |
Abdu MT, Soliman MS, El-Danaf EA, Almajid AA, Mohamed FA. Creep characteristics and microstructure in nano-particle strengthened AA6082 Materials Science and Engineering A. 531: 35-44. DOI: 10.1016/J.Msea.2011.09.115 |
0.184 |
|
| 2014 |
El Rayes MM, El-Danaf EA, Almajid AA. Ultrasonic non-destructive characterization of power plant steel Tms Annual Meeting. 199-208. |
0.182 |
|
| 2012 |
Friedrich K, Knör N, Almajid AA. Processing-Structure-Property Relationships of Thermoplastic Nanocomposites used in Friction and Wear Applications Mechanics of Composite Materials. 1-14. DOI: 10.1007/s11029-012-9264-8 |
0.18 |
|
| 2013 |
El-Danaf EA, Soliman MS, Almajid AA, Khalil KA. Mechanical characterization of cryomilled Al powder consolidated by high-frequency induction heat sintering Advances in Materials Science and Engineering. 2013. DOI: 10.1155/2013/397351 |
0.18 |
|
| 2016 |
El Rayes MM, El-Danaf EA, Almajid AA. Microstructural and mechanical characterization of artificially-aged power plant steel Materials Science Forum. 863: 31-39. DOI: 10.4028/www.scientific.net/MSF.863.31 |
0.179 |
|
| 2009 |
El-Danaf EA, Soliman MS, Almajid AA. Effect of solution heat treatment on the hot workability of Al-Mg-Si alloy Materials and Manufacturing Processes. 24: 637-643. DOI: 10.1080/10426910902769079 |
0.179 |
|
| 2009 |
Almajid AA, El-Danaf EA, Soliman MS. Effect of combining plane-strain compression with equal channel angular pressing on mechanical properties and texture development in an Al alloy Journal of Materials Science. 44: 5654-5661. DOI: 10.1007/s10853-009-3796-x |
0.178 |
|
| 2015 |
Ahmad I, Islam M, Abdo HS, Subhani T, Khalil KA, Almajid AA, Yazdani B, Zhu Y. Toughening mechanisms and mechanical properties of graphene nanosheet-reinforced alumina Materials and Design. 88: 1234-1243. DOI: 10.1016/j.matdes.2015.09.125 |
0.176 |
|
| 2008 |
El-Danaf EA, Almajid AA, Soliman MS. High-temperature deformation and ductility of a modified 5083 Al alloy Journal of Materials Engineering and Performance. 17: 572-579. DOI: 10.1007/s11665-007-9173-5 |
0.173 |
|
| 2011 |
Khalil KA, Sherif ESM, Almajid AA. Corrosion passivation in simulated body fluid of magnesium/hydroxyapatite nanocomposites sintered by high frequency induction heating International Journal of Electrochemical Science. 6: 6184-6199. |
0.171 |
|
| 2010 |
Harrass M, Friedrich K, Almajid AA. Tribological behavior of selected engineering polymers under rolling contact Tribology International. 43: 635-646. DOI: 10.1016/j.triboint.2009.10.003 |
0.171 |
|
| 2021 |
Almajid AA. High-Temperature Deformation of Naturally Aged 7010 Aluminum Alloy Metals. 11: 581. DOI: 10.3390/MET11040581 |
0.169 |
|
| 2015 |
El-Deen AG, Choi JH, Khalil KA, Almajid AA, Barakat NAM. A TiO2 nanofiber/activated carbon composite as a novel effective electrode material for capacitive deionization of brackish water Rsc Advances. 4: 64634-64642. DOI: 10.1039/c4ra09948f |
0.168 |
|
| 2010 |
Soliman MS, El-Danaf EA, Almajid AA. Deformation characteristics of A 6082-Al alloy at high temperatures Tms Annual Meeting. 1: 77-82. |
0.166 |
|
| 2011 |
Friedrich K, Almajid AA, Noll A, Burkhart T. Effect of thermal treatment on hardness and fracture toughness of a poly-para-phenylene-copolymer Journal of Materials Science. 46: 1714-1722. DOI: 10.1007/s10853-010-4989-z |
0.164 |
|
| 2012 |
Khalil KA, Almajid AA, El-Danaf EA, El Rayes MM, Sherif ESM. Direct fabrication of yttrium aluminium garnet nanofibers by electrospinning International Journal of Electrochemical Science. 7: 12218-12226. |
0.161 |
|
| 2016 |
Meenashisundaram GK, Nai MH, Almajid A, Khalil KA, Abdo HS, Gupta M. Effects of TiO2 powder morphology on the mechanical response of pure magnesium: 1D nanofibers versus 0D nanoparticulates Journal of Alloys and Compounds. 664: 45-58. DOI: 10.1016/j.jallcom.2015.12.176 |
0.158 |
|
| 2011 |
Sherif ESM, Almajid AA, Latif FH, Junaedi H. Effects of graphite on the corrosion behavior of aluminum-graphite composite in sodium chloride solutions International Journal of Electrochemical Science. 6: 1085-1099. |
0.157 |
|
| 2014 |
Hanna W, Maung K, El-Danaf EA, Almajid AA, Soliman MS, Mohamed FA. Nanocrystalline 6061 Al powder fabricated by cryogenic milling and consolidated via high frequency induction heat sintering Advances in Materials Science and Engineering. 2014. DOI: 10.1155/2014/921017 |
0.151 |
|
| 2012 |
Waluyo NS, Almajid AA, Soliman MA. Microwave sintering of barium ferrite nanoparticles processed via sol-gel method Advanced Materials Research. 463: 1468-1472. DOI: 10.4028/www.scientific.net/AMR.463-464.1468 |
0.15 |
|
| 2015 |
El Rayes MM, El-Danaf EA, Almajid AA. Ultrasonic characterization of heat-treatment effects on SAE-1040 and -4340 steels Journal of Materials Processing Technology. 216: 188-198. DOI: 10.1016/j.jmatprotec.2014.09.005 |
0.141 |
|
| 2011 |
Almajid AA. High temperature deformation of solution treated 7010 Al-alloy Journal of King Saud University - Engineering Sciences. 23: 21-25. DOI: 10.1016/J.JKSUES.2009.12.001 |
0.133 |
|
| 2015 |
Sankaranarayanan S, Sabat RK, Jayalakshmi S, Suwas S, Almajid A, Gupta M. Mg/BN nanocomposites: Nano-BN addition for enhanced room temperature tensile and compressive response Journal of Composite Materials. 49: 3045-3055. DOI: 10.1177/0021998314559278 |
0.131 |
|
| 2014 |
Tekumalla S, Seetharaman S, Almajid A, Gupta M. Mechanical Properties of Magnesium-Rare Earth Alloy Systems: A Review Metals. 5: 1-39. DOI: 10.3390/MET5010001 |
0.131 |
|
| 2015 |
Islam M, Azhar MR, Fredj N, Burleigh TD, Oloyede OR, Almajid AA, Ismat Shah S. Influence of SiO2 nanoparticles on hardness and corrosion resistance of electroless Ni-P coatings Surface and Coatings Technology. 261: 141-148. DOI: 10.1016/j.surfcoat.2014.11.044 |
0.127 |
|
| 2014 |
Hossain Seikh A, Soliman MS, AlMajid A, Alhajeri K, Alshalfan W. Austenite Grain Growth Kinetics in API X65 and X70 Line-Pipe Steels during Isothermal Heating Advances in Materials Science and Engineering. 2014: 1-8. DOI: 10.1155/2014/246143 |
0.125 |
|
| 2015 |
Barakat NAM, Moustafa HM, Nassar MM, Abdelkareem MA, Mahmoud MS, Almajid AA, Khalil KA. Distinct influence for carbon nano-morphology on the activity and optimum metal loading of Ni/C composite used for ethanol oxidation Electrochimica Acta. 182: 143-155. DOI: 10.1016/j.electacta.2015.09.079 |
0.124 |
|
| 2010 |
Friedrich K, Burkhart T, Almajid AA, Haupert F. Poly-para-phenylene-copolymer (PPP): A high-strength polymer with interesting mechanical and tribological properties International Journal of Polymeric Materials and Polymeric Biomaterials. 59: 680-692. DOI: 10.1080/00914037.2010.483211 |
0.123 |
|
| 2016 |
Sherif ESM, Mohammed JA, Abdo HS, Almajid AA. Corrosion behavior in highly concentrated sodium chloride solutions of nanocrystalline aluminum processed by high energy ball mill International Journal of Electrochemical Science. 11: 1355-1369. |
0.123 |
|
| 2015 |
Motlak M, Barakat NAM, Akhtar MS, Hamza AM, Kim BS, Kim CS, Khalil KA, Almajid AA. High performance of NiCo nanoparticles-doped carbon nanofibers as counter electrode for dye-sensitized solar cells Electrochimica Acta. 160: 1-6. DOI: 10.1016/j.electacta.2015.02.063 |
0.123 |
|
| 2024 |
Baig M, Almeshari B, Aabid A, Junaedi H, Almajid A. The effect of maleic anhydride grafted polypropylene addition on the degradation in the mechanical properties of the PP/wood composites. Heliyon. 10: e30510. PMID 38726142 DOI: 10.1016/j.heliyon.2024.e30510 |
0.12 |
|
| 2010 |
Almajid A, Friedrich K, Floeck J, Burkhart T. Surface Damage Characteristics and Specific Wear Rates of a New Continuous Carbon Fiber (CF) / Polyetheretherketone (PEEK) Composite under Sliding and Rolling Contact Conditions Applied Composite Materials. 18: 211-230. DOI: 10.1007/S10443-010-9147-X |
0.119 |
|
| 2012 |
Sherif ESM, Almajid AA, Bairamov AK, Al-Zahrani E. A comparative study on the corrosion of monel-400 in aerated and deaerated arabian gulf water and 3.5% sodium chloride solutions International Journal of Electrochemical Science. 7: 2796-2810. |
0.111 |
|
| 2014 |
Sankaranarayanan S, Pranav Nayak U, Sabat RK, Suwas S, Almajid A, Gupta M. Nano-ZnO particle addition to monolithic magnesium for enhanced tensile and compressive response Journal of Alloys and Compounds. 615: 211-219. DOI: 10.1016/j.jallcom.2014.06.163 |
0.108 |
|
| 2012 |
Huda Z, Edi P, Almajid AA, Al-Garni AZ. New Trends in Designing Markets, Configurations, and Materials for Very Light Jet Aircrafts Journal of Aerospace Engineering. 25: 369-375. DOI: 10.1061/(ASCE)AS.1943-5525.0000125 |
0.107 |
|
| 2013 |
Sherif ESM, Soliman MS, El-Danaf EA, Almajid AA. Effect of equal-channel angular pressing passes on the corrosion behavior of 1050 aluminum alloy in natural seawater International Journal of Electrochemical Science. 8: 1103-1116. |
0.106 |
|
| 2017 |
Dar M, Nam S, Abdo H, Almajid A, Kim D, Qurashi A, Kim W. Self-assembled Co3O4 nanoplatelets into micro-spheres via a simple solvothermal route: Structural and electrochemical properties Journal of Alloys and Compounds. 695: 329-336. DOI: 10.1016/J.JALLCOM.2016.10.174 |
0.105 |
|
| 2015 |
Motlak M, Barakat NAM, Akhtar MS, El-Deen AG, Obaid M, Kim CS, Khalil KA, Almajid AA. High-efficiency dye-sensitized solar cells based on nitrogen and graphene oxide co-incorporated TiO2 nanofibers photoelectrode Chemical Engineering Journal. 268: 153-161. DOI: 10.1016/j.cej.2015.01.065 |
0.104 |
|
| 2016 |
Obaid M, Ghouri ZK, Fadali OA, Khalil KA, Almajid AA, Barakat NA. Amorphous SiO2 NP-Incorporated Poly(vinylidene fluoride) Electrospun Nanofiber Membrane for High Flux Forward Osmosis Desalination. Acs Applied Materials & Interfaces. 8: 4561-74. PMID 26684268 DOI: 10.1021/acsami.5b09945 |
0.104 |
|
| 2015 |
Obaid M, Barakat NAM, Fadali OA, Motlak M, Almajid AA, Khalil KA. Effective and reusable oil/water separation membranes based on modified polysulfone electrospun nanofiber mats Chemical Engineering Journal. 259: 449-456. DOI: 10.1016/j.cej.2014.07.095 |
0.103 |
|
| 2015 |
Meenashisundaram GK, Nai MH, Almajid A, Gupta M. Development of high performance Mg–TiO2 nanocomposites targeting for biomedical/structural applications Materials & Design (1980-2015). 65: 104-114. DOI: 10.1016/J.MATDES.2014.08.041 |
0.102 |
|
| 2015 |
Obaid M, Tolba GMK, Motlak M, Fadali OA, Khalil KA, Almajid AA, Kim B, Barakat NAM. Effective polysulfone-amorphous SiO2 NPs electrospun nanofiber membrane for high flux oil/water separation Chemical Engineering Journal. 279: 631-638. DOI: 10.1016/J.Cej.2015.05.028 |
0.1 |
|
| 2015 |
Sherif ESM, Almajid AA. Electrochemical corrosion behavior of API X-70 5L grade steel in 4.0 wt. % sodium chloride solutions after different immersion periods of time International Journal of Electrochemical Science. 10: 34-45. |
0.099 |
|
| 2012 |
Sherif ESM, El-Danaf EA, Soliman MS, Almajid AA. Corrosion passivation in natural seawater of aluminum alloy 1050 processed by equal-channel-angular-press International Journal of Electrochemical Science. 7: 2846-2859. |
0.096 |
|
| 2011 |
Sherif ESM, Almajid AA. Corrosion of magnesium/manganese alloy in chloride solutions and its inhibition by 5-(3-aminophenyl)-tetrazole International Journal of Electrochemical Science. 6: 2131-2148. |
0.085 |
|
| 2013 |
Sherif ES, Almajid AA, Khalil KA, Junaedi H, Latief FH. Electrochemical studies on the corrosion behavior of API X65 pipeline steel in chloride solutions International Journal of Electrochemical Science. 8: 9360-9370. |
0.081 |
|
| 2011 |
Almajid AA. Microwave synthesis of nanocrystalline yttria World Academy of Science, Engineering and Technology. 74: 103-111. |
0.077 |
|
| 2016 |
Sherif ESM, Abdo HS, Mohammed JA, Almajid AA, Seikh AH. Corrosion of newly manufactured nanocrystalline al and two of its alloys in stagnant 4.0% NaCl solutions International Journal of Electrochemical Science. 11: 4598-4610. DOI: 10.20964/2016.06.21 |
0.077 |
|
| 2014 |
Sherif ESM, Almajid AA. Anodic dissolution of API X70 pipeline steel in Arabian Gulf seawater after different exposure intervals Journal of Chemistry. 2014. DOI: 10.1155/2014/753041 |
0.071 |
|
| 2016 |
Nishikawa H, Alhazaa AN, He S, Almajid AA, Soliman MS. Interfacial reaction between Sn-Ag-Cu-Mg solder and enig substrate Key Engineering Materials. 701: 216-219. DOI: 10.4028/www.scientific.net/KEM.701.216 |
0.067 |
|
| 2010 |
Sherif ESM, Almajid AA. Surface protection of copper in aerated 3.5% sodium chloride solutions by 3-amino-5-mercapto-1,2,4-triazole as a copper corrosion inhibitor Journal of Applied Electrochemistry. 40: 1555-1562. DOI: 10.1007/s10800-010-0140-8 |
0.065 |
|
| 2011 |
Sherif ESM, Almajid AA, Bairamov AK, Al-Zahrani E. Corrosion of Monel-400 in aerated stagnant Arabian Gulf seawater after different exposure intervals International Journal of Electrochemical Science. 6: 5430-5444. |
0.061 |
|
| 2015 |
Sherif ESM, Abdo HS, Almajid AA. Corrosion behavior of cast Iron in freely aerated stagnant Arabian gulf seawater Materials. 8: 2127-2138. DOI: 10.3390/ma8052127 |
0.057 |
|
| 2017 |
Dar MA, Gul R, Alfadda AA, Karim MR, Kim DW, Cheung CL, Almajid AA, Alharthi NH, Pulakat L. Size-Dependent Effect of Nanoceria on Their Antibacterial Activity Towards Escherichia coli Science of Advanced Materials. 9: 1248-1253. DOI: 10.1166/sam.2017.3098 |
0.056 |
|
| 2011 |
Friedrich K, Sue HJ, Liu P, Almajid AA. Scratch resistance of high performance polymers Tribology International. 44: 1032-1046. DOI: 10.1016/j.triboint.2011.04.008 |
0.049 |
|
| 2009 |
Shehata Aly M, Almajid A, Nakano S, Ochiai S. Fracture of open cell copper foams under tension Materials Science and Engineering: A. 519: 211-213. DOI: 10.1016/J.MSEA.2009.04.062 |
0.044 |
|
| 2011 |
Khalil KA, Almajid AA, Soliman MS. Effect of Hydroxide Ion Concentration on the Morphology of the Hydroxyapatite Nanorods Synthesized Using Electrophoretic Deposition Materials Sciences and Applications. 2: 105-110. DOI: 10.4236/MSA.2011.22014 |
0.035 |
|
| Hide low-probability matches. |