Year |
Citation |
Score |
2023 |
Korkolis YP, Knysh P, Sasaki K, Furushima T, Knezevic M. Deformation-Induced Surface Roughening of an Aluminum-Magnesium Alloy: Experimental Characterization and Crystal Plasticity Modeling. Materials (Basel, Switzerland). 16. PMID 37629891 DOI: 10.3390/ma16165601 |
0.421 |
|
2020 |
Ferreri NC, Vogel SC, Knezevic M. Determining volume fractions of γ, γ′, γ″, δ, and MC-carbide phases in Inconel 718 as a function of its processing history using an advanced neutron diffraction procedure Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 781: 139228. DOI: 10.1016/J.Msea.2020.139228 |
0.356 |
|
2020 |
Kudzal AD, McWilliams BA, Taggart-Scarff J, Knezevic M. Fabrication of a low alloy ultra-high strength (>1500 MPa yield) steel using powder bed fusion additive manufacturing Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 770: 138512. DOI: 10.1016/J.Msea.2019.138512 |
0.38 |
|
2020 |
Feng Z, Yoon S, Choi J, Barrett TJ, Zecevic M, Barlat F, Knezevic M. A comparative study between elasto-plastic self-consistent crystal plasticity and anisotropic yield function with distortional hardening formulations for sheet metal forming Mechanics of Materials. 148: 103422. DOI: 10.1016/J.Mechmat.2020.103422 |
0.535 |
|
2020 |
Ferreri NC, Savage DJ, Knezevic M. Non-acid, alcohol-based electropolishing enables high-quality electron backscatter diffraction characterization of titanium and its alloys: Application to pure Ti and Ti-6Al-4V Materials Characterization. 166: 110406. DOI: 10.1016/J.Matchar.2020.110406 |
0.391 |
|
2020 |
Barrett TJ, McCabe RJ, Brown DW, Clausen B, Vogel SC, Knezevic M. Predicting deformation behavior of α-uranium during tension, compression, load reversal, rolling, and sheet forming using elasto-plastic, multi-level crystal plasticity coupled with finite elements Journal of the Mechanics and Physics of Solids. 138: 103924. DOI: 10.1016/J.Jmps.2020.103924 |
0.518 |
|
2020 |
Eghtesad A, Knezevic M. High-performance full-field crystal plasticity with dislocation-based hardening and slip system back-stress laws: Application to modeling deformation of dual-phase steels Journal of the Mechanics and Physics of Solids. 134: 103750. DOI: 10.1016/J.Jmps.2019.103750 |
0.53 |
|
2020 |
Barrett TJ, Takagi S, Islam N, Kuwabara T, Hassan T, Kinsey BL, Knezevic M, Korkolis YP. Material modeling and simulation of continuous-bending-under-tension of AA6022-T4 Journal of Materials Processing Technology. 116658. DOI: 10.1016/J.Jmatprotec.2020.116658 |
0.474 |
|
2020 |
Feng Z, Zecevic M, Knezevic M. Stress-assisted (γ→α′) and strain-induced (γ→ε→α’) phase transformation kinetics laws implemented in a crystal plasticity model for predicting strain path sensitive deformation of austenitic steels International Journal of Plasticity. 102807. DOI: 10.1016/J.Ijplas.2020.102807 |
0.471 |
|
2020 |
Zecevic M, Knezevic M, McWilliams B, Lebensohn RA. Modeling of the thermo-mechanical response and texture evolution of WE43 Mg alloy in the dynamic recrystallization regime using a viscoplastic self-consistent formulation International Journal of Plasticity. 130: 102705. DOI: 10.1016/J.Ijplas.2020.102705 |
0.473 |
|
2020 |
Wang J, Zecevic M, Knezevic M, Beyerlein IJ. Polycrystal plasticity modeling for load reversals in commercially pure titanium International Journal of Plasticity. 125: 294-313. DOI: 10.1016/J.Ijplas.2019.09.013 |
0.437 |
|
2020 |
Ghorbanpour S, Alam ME, Ferreri NC, Kumar A, McWilliams BA, Vogel SC, Bicknell J, Beyerlein IJ, Knezevic M. Experimental characterization and crystal plasticity modeling of anisotropy, tension-compression asymmetry, and texture evolution of additively manufactured Inconel 718 at room and elevated temperatures International Journal of Plasticity. 125: 63-79. DOI: 10.1016/J.Ijplas.2019.09.002 |
0.519 |
|
2020 |
Savage DJ, Beyerlein IJ, Mara NA, Vogel SC, McCabe RJ, Knezevic M. Microstructure and texture evolution in Mg/Nb layered materials made by accumulative roll bonding International Journal of Plasticity. 125: 1-26. DOI: 10.1016/J.Ijplas.2019.08.015 |
0.472 |
|
2020 |
Tam KJ, Vaughan MW, Shen L, Knezevic M, Karaman I, Proust G. Modelling the temperature and texture effects on the deformation mechanisms of magnesium alloy AZ31 International Journal of Mechanical Sciences. 182: 105727. DOI: 10.1016/J.Ijmecsci.2020.105727 |
0.484 |
|
2020 |
Barrett TJ, Knezevic M. Modeling material behavior during continuous bending under tension for inferring the post-necking strain hardening response of ductile sheet metals: Application to DP 780 steel International Journal of Mechanical Sciences. 174: 105508. DOI: 10.1016/J.Ijmecsci.2020.105508 |
0.451 |
|
2020 |
Vasilev E, Zecevic M, McCabe RJ, Knezevic M. Experimental verification of a crystal plasticity-based simulation framework for predicting microstructure and geometric shape changes: Application to bending and Taylor impact testing of Zr International Journal of Impact Engineering. 144: 103655. DOI: 10.1016/J.Ijimpeng.2020.103655 |
0.524 |
|
2020 |
Savage DJ, McWilliams BA, Vogel SC, Trujillo CP, Beyerlein IJ, Knezevic M. Mechanical behavior and texture evolution of WE43 magnesium-rare earth alloy in Split-Hopkinson Pressure Bar and Taylor Impact Cylinder Testing International Journal of Impact Engineering. 143: 103589. DOI: 10.1016/J.Ijimpeng.2020.103589 |
0.463 |
|
2020 |
Ghorbanpour S, McWilliams BA, Knezevic M. Effects of environmental temperature and sample pre-straining on high cycle fatigue strength of WE43-T5 magnesium alloy International Journal of Fatigue. 141: 105903. DOI: 10.1016/J.Ijfatigue.2020.105903 |
0.404 |
|
2020 |
Eghtesad A, Germaschewski K, Lebensohn RA, Knezevic M. A multi-GPU implementation of a full-field crystal plasticity solver for efficient modeling of high-resolution microstructures Computer Physics Communications. 254: 107231. DOI: 10.1016/J.Cpc.2020.107231 |
0.418 |
|
2020 |
Su Y, Ardeljan M, Knezevic M, Jain M, Pathak S, Beyerlein IJ. Elastic constants of pure body-centered cubic Mg in nanolaminates Computational Materials Science. 174: 109501. DOI: 10.1016/J.Commatsci.2019.109501 |
0.601 |
|
2020 |
Ferreri NC, Pokharel R, Livescu V, Brown DW, Knezevic M, Park J, Torrez MA, Gray GT. Effects of heat treatment and build orientation on the evolution of ϵ and α′ martensite and strength during compressive loading of additively manufactured 304L stainless steel Acta Materialia. 195: 59-70. DOI: 10.1016/J.Actamat.2020.04.036 |
0.44 |
|
2020 |
Poulin CM, Vogel SC, Korkolis YP, Kinsey BL, Knezevic M. Experimental studies into the role of cyclic bending during stretching of dual-phase steel sheets International Journal of Material Forming. 13: 1-16. DOI: 10.1007/S12289-019-01530-2 |
0.394 |
|
2020 |
Vasilev E, Ferreri NC, Decker R, Beyerlein IJ, Knezevic M. Strain-Rate Sensitivity, Tension-Compression Asymmetry, r -Ratio, Twinning, and Texture Evolution of a Rolled Magnesium Alloy Mg-1.3Zn-0.4Ca-0.4Mn Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 51: 3858-3868. DOI: 10.1007/S11661-020-05841-X |
0.438 |
|
2020 |
Poulin CM, Barrett TJ, Knezevic M. Inferring Post-Necking Strain Hardening Behavior of Sheets by a Combination of Continuous Bending Under Tension Testing and Finite Element Modeling Experimental Mechanics. 60: 459-473. DOI: 10.1007/S11340-019-00577-1 |
0.417 |
|
2020 |
Feather WG, Lim H, Knezevic M. A numerical study into element type and mesh resolution for crystal plasticity finite element modeling of explicit grain structures Computational Mechanics. 1-23. DOI: 10.1007/S00466-020-01918-X |
0.406 |
|
2019 |
Jain M, Velisavljevic N, Baldwin JK, Knezevic M, Mara NA, Beyerlein IJ, Pathak S. Structure and properties of pseudomorphically transformed bcc Mg in Mg/Nb multilayered nanolaminates studied using synchrotron X-ray diffraction Journal of Applied Physics. 126: 025302. DOI: 10.1063/1.5097249 |
0.55 |
|
2019 |
Barrett TJ, Eghtesad A, McCabe RJ, Clausen B, Brown DW, Vogel SC, Knezevic M. A generalized spherical harmonics-based procedure for the interpolation of partial datasets of orientation distributions to enable crystal mechanics-based simulations Materialia. 6: 100328. DOI: 10.1016/J.Mtla.2019.100328 |
0.428 |
|
2019 |
Knezevic M, Poulin CM, Zheng X, Zheng S, Beyerlein IJ. Strengthening of alloy AA6022-T4 by continuous bending under tension Materials Science and Engineering: A. 758: 47-55. DOI: 10.1016/J.Msea.2019.04.109 |
0.441 |
|
2019 |
Ghorbanpour S, McWilliams BA, Knezevic M. Effect of hot working and aging heat treatments on monotonic, cyclic, and fatigue behavior of WE43 magnesium alloy Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 747: 27-41. DOI: 10.1016/J.Msea.2019.01.056 |
0.376 |
|
2019 |
Zecevic M, Knezevic M. An implicit formulation of the elasto-plastic self-consistent polycrystal plasticity model and its implementation in implicit finite elements Mechanics of Materials. 136: 103065. DOI: 10.1016/J.Mechmat.2019.103065 |
0.481 |
|
2019 |
Poulin CM, Korkolis YP, Kinsey BL, Knezevic M. Over five-times improved elongation-to-fracture of dual-phase 1180 steel by continuous-bending-under-tension Materials & Design. 161: 95-105. DOI: 10.1016/J.Matdes.2018.11.022 |
0.383 |
|
2019 |
Gribbin S, Ghorbanpour S, Ferreri NC, Bicknell J, Tsukrov I, Knezevic M. Role of grain structure, grain boundaries, crystallographic texture, precipitates, and porosity on fatigue behavior of Inconel 718 at room and elevated temperatures Materials Characterization. 149: 184-197. DOI: 10.1016/J.Matchar.2019.01.028 |
0.404 |
|
2019 |
Roemer TJ, Barrett TJ, Knezevic M, Kinsey BL, Korkolis YP. Experimental study of continuous-bending-under-tension of AA6022-T4 Journal of Materials Processing Technology. 266: 707-714. DOI: 10.1016/J.Jmatprotec.2018.11.046 |
0.355 |
|
2019 |
Ferreri NC, Ghorbanpour S, Bhowmik S, Lussier R, Bicknell J, Patterson BM, Knezevic M. Effects of build orientation and heat treatment on the evolution of microstructure and mechanical properties of alloy Mar-M-509 fabricated via laser powder bed fusion International Journal of Plasticity. 121: 116-133. DOI: 10.1016/J.Ijplas.2019.06.002 |
0.417 |
|
2019 |
Feather WG, Ghorbanpour S, Savage DJ, Ardeljan M, Jahedi M, McWilliams BA, Gupta N, Xiang C, Vogel SC, Knezevic M. Mechanical response, twinning, and texture evolution of WE43 magnesium-rare earth alloy as a function of strain rate: Experiments and multi-level crystal plasticity modeling International Journal of Plasticity. 120: 180-204. DOI: 10.1016/J.Ijplas.2019.04.019 |
0.52 |
|
2019 |
Chelladurai I, Adams D, Fullwood DT, Miles MP, Niezgoda S, Beyerlein IJ, Knezevic M. Modeling of trans-grain twin transmission in AZ31 via a neighborhood-based viscoplastic self-consistent model International Journal of Plasticity. 117: 21-32. DOI: 10.1016/J.Ijplas.2018.03.012 |
0.441 |
|
2019 |
Cantara AM, Zecevic M, Eghtesad A, Poulin CM, Knezevic M. Predicting elastic anisotropy of dual-phase steels based on crystal mechanics and microstructure International Journal of Mechanical Sciences. 151: 639-649. DOI: 10.1016/J.Ijmecsci.2018.12.021 |
0.47 |
|
2019 |
Knysh P, Sasaki K, Furushima T, Knezevic M, Korkolis YP. A shape interpolation procedure: Application to creating explicit grain structure models based on partial data sets Computational Materials Science. 167: 42-51. DOI: 10.1016/J.Commatsci.2019.05.014 |
0.381 |
|
2019 |
Barrett TJ, Knezevic M. Deep drawing simulations using the finite element method embedding a multi-level crystal plasticity constitutive law: Experimental verification and sensitivity analysis Computer Methods in Applied Mechanics and Engineering. 354: 245-270. DOI: 10.1016/J.Cma.2019.05.035 |
0.463 |
|
2019 |
Zecevic M, Upadhyay MV, Polatidis E, Panzner T, Swygenhoven HV, Knezevic M. A crystallographic extension to the Olson-Cohen model for predicting strain path dependence of martensitic transformation Acta Materialia. 166: 386-401. DOI: 10.1016/J.Actamat.2018.12.060 |
0.458 |
|
2019 |
Zecevic M, Lebensohn RA, McCabe RJ, Knezevic M. Modelling recrystallization textures driven by intragranular fluctuations implemented in the viscoplastic self-consistent formulation Acta Materialia. 164: 530-546. DOI: 10.1016/J.Actamat.2018.11.002 |
0.454 |
|
2019 |
Leu B, Savage DJ, Wang J, Alam ME, Mara NA, Kumar MA, Carpenter JS, Vogel SC, Knezevic M, Decker R, Beyerlein IJ. Processing of Dilute Mg–Zn–Mn–Ca Alloy/Nb Multilayers by Accumulative Roll Bonding Advanced Engineering Materials. 22: 1900673. DOI: 10.1002/Adem.201900673 |
0.306 |
|
2018 |
Beyerlein IJ, Knezevic M. Review of microstructure and micromechanism-based constitutive modeling of polycrystals with a low-symmetry crystal structure Journal of Materials Research. 33: 3711-3738. DOI: 10.1557/Jmr.2018.333 |
0.401 |
|
2018 |
Ardeljan M, Knezevic M, Jain M, Pathak S, Kumar A, Li N, Mara NA, Baldwin JK, Beyerlein IJ. Room temperature deformation mechanisms of Mg/Nb nanolayered composites Journal of Materials Research. 33: 1311-1332. DOI: 10.1557/Jmr.2018.107 |
0.575 |
|
2018 |
Jahedi M, McWilliams BA, Knezevic M. Deformation and fracture mechanisms in WE43 magnesium-rare earth alloy fabricated by direct-chill casting and rolling Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 726: 194-207. DOI: 10.1016/J.Msea.2018.04.090 |
0.378 |
|
2018 |
Nugmanov D, Knezevic M, Zecevic M, Sitdikov O, Markushev M, Beyerlein IJ. Origin of plastic anisotropy in (ultra)-fine-grained Mg–Zn–Zr alloy processed by isothermal multi-step forging and rolling: Experiments and modeling Materials Science and Engineering: A. 713: 81-93. DOI: 10.1016/J.Msea.2017.12.045 |
0.458 |
|
2018 |
Jahedi M, McWilliams BA, Kellogg FR, Beyerlein IJ, Knezevic M. Rate and temperature dependent deformation behavior of as-cast WE43 magnesium-rare earth alloy manufactured by direct-chill casting Materials Science and Engineering: A. 712: 50-64. DOI: 10.1016/J.Msea.2017.11.092 |
0.472 |
|
2018 |
Savage DJ, Chandola N, Cazacu O, McWilliams BA, Knezevic M. Validation of recent analytical dilatational models for porous polycrystals using crystal plasticity finite element models with Schmid and non-Schmid activation laws Mechanics of Materials. 126: 148-162. DOI: 10.1016/J.Mechmat.2018.08.004 |
0.479 |
|
2018 |
Zecevic M, Beyerlein IJ, Knezevic M. Activity of pyramidal I and II slip in Mg alloys as revealed by texture development Journal of the Mechanics and Physics of Solids. 111: 290-307. DOI: 10.1016/J.Jmps.2017.11.004 |
0.408 |
|
2018 |
Zecevic M, Lebensohn RA, McCabe RJ, Knezevic M. Modeling of intragranular misorientation and grain fragmentation in polycrystalline materials using the viscoplastic self-consistent formulation International Journal of Plasticity. 109: 193-211. DOI: 10.1016/J.Ijplas.2018.06.004 |
0.468 |
|
2018 |
Zecevic M, Knezevic M. Latent hardening within the elasto-plastic self-consistent polycrystal homogenization to enable the prediction of anisotropy of AA6022-T4 sheets International Journal of Plasticity. 105: 141-163. DOI: 10.1016/J.Ijplas.2018.02.007 |
0.485 |
|
2018 |
Barrett TJ, Savage DJ, Ardeljan M, Knezevic M. An automated procedure for geometry creation and finite element mesh generation: Application to explicit grain structure models and machining distortion Computational Materials Science. 141: 269-281. DOI: 10.1016/J.Commatsci.2017.09.048 |
0.457 |
|
2018 |
Zecevic M, Knezevic M. A new visco-plastic self-consistent formulation implicit in dislocation-based hardening within implicit finite elements: Application to high strain rate and impact deformation of tantalum Computer Methods in Applied Mechanics and Engineering. 341: 888-916. DOI: 10.1016/J.Cma.2018.07.027 |
0.486 |
|
2018 |
Eghtesad A, Barrett TJ, Germaschewski K, Lebensohn RA, McCabe RJ, Knezevic M. OpenMP and MPI implementations of an elasto-viscoplastic fast Fourier transform-based micromechanical solver for fast crystal plasticity modeling Advances in Engineering Software. 126: 46-60. DOI: 10.1016/J.Advengsoft.2018.09.010 |
0.371 |
|
2018 |
Eghtesad A, Germaschewski K, Beyerlein IJ, Hunter A, Knezevic M. Graphics processing unit accelerated phase field dislocation dynamics: Application to bi-metallic interfaces Advances in Engineering Software. 115: 248-267. DOI: 10.1016/J.Advengsoft.2017.09.010 |
0.343 |
|
2018 |
Ardeljan M, Knezevic M. Explicit modeling of double twinning in AZ31 using crystal plasticity finite elements for predicting the mechanical fields for twin variant selection and fracture analyses Acta Materialia. 157: 339-354. DOI: 10.1016/J.Actamat.2018.07.045 |
0.496 |
|
2018 |
Eghtesad A, Barrett TJ, Knezevic M. Compact reconstruction of orientation distributions using generalized spherical harmonics to advance large-scale crystal plasticity modeling: Verification using cubic, hexagonal, and orthorhombic polycrystals Acta Materialia. 155: 418-432. DOI: 10.1016/J.Actamat.2018.06.017 |
0.487 |
|
2018 |
Eghtesad A, Knezevic M. A new approach to fluid–structure interaction within graphics hardware accelerated smooth particle hydrodynamics considering heterogeneous particle size distribution Computational Particle Mechanics. 5: 387-409. DOI: 10.1007/S40571-017-0176-1 |
0.315 |
|
2018 |
Eghtesad A, Zecevic M, Lebensohn RA, McCabe RJ, Knezevic M. Spectral database constitutive representation within a spectral micromechanical solver for computationally efficient polycrystal plasticity modelling Computational Mechanics. 61: 89-104. DOI: 10.1007/S00466-017-1413-4 |
0.464 |
|
2018 |
Knezevic M, Beyerlein IJ. Multiscale Modeling of Microstructure-Property Relationships of Polycrystalline Metals during Thermo-Mechanical Deformation Advanced Engineering Materials. 20: 1700956. DOI: 10.1002/Adem.201700956 |
0.413 |
|
2017 |
Barrett T, Kinsey BL, Knezevic M, Korkolis YP. Numerical and experimental investigation of formability enhancement during continuous-bending-under-tension (CBT) of AA6022-T4 Procedia Engineering. 207: 1940-1945. DOI: 10.1016/J.Proeng.2017.10.965 |
0.411 |
|
2017 |
Steiner MA, Klein RW, Calhoun CA, Knezevic M, Garlea E, Agnew SR. Efficient rolling texture predictions and texture-sensitive thermomechanical properties of α-uranium foils Journal of Nuclear Materials. 495: 234-243. DOI: 10.1016/J.Jnucmat.2017.08.006 |
0.473 |
|
2017 |
Savage DJ, Beyerlein IJ, Knezevic M. Coupled texture and non-Schmid effects on yield surfaces of body-centered cubic polycrystals predicted by a crystal plasticity finite element approach International Journal of Solids and Structures. 109: 22-32. DOI: 10.1016/J.Ijsolstr.2017.01.003 |
0.472 |
|
2017 |
Knezevic M, Bhattacharyya A. Characterization of microstructure in Nb rods processed by rolling: Effect of grooved rolling die geometry on texture uniformity International Journal of Refractory Metals & Hard Materials. 66: 44-51. DOI: 10.1016/J.Ijrmhm.2017.02.007 |
0.61 |
|
2017 |
Ghorbanpour S, Zecevic M, Kumar A, Jahedi M, Bicknell J, Jorgensen L, Beyerlein IJ, Knezevic M. A crystal plasticity model incorporating the effects of precipitates in superalloys: Application to tensile, compressive, and cyclic deformation of Inconel 718 International Journal of Plasticity. 99: 162-185. DOI: 10.1016/J.Ijplas.2017.09.006 |
0.537 |
|
2017 |
Ardeljan M, Beyerlein IJ, Knezevic M. Effect of dislocation density-twin interactions on twin growth in AZ31 as revealed by explicit crystal plasticity finite element modeling International Journal of Plasticity. 99: 81-101. DOI: 10.1016/J.Ijplas.2017.09.002 |
0.454 |
|
2017 |
Zecevic M, Beyerlein IJ, Knezevic M. Coupling elasto-plastic self-consistent crystal plasticity and implicit finite elements: Applications to compression, cyclic tension-compression, and bending to large strains International Journal of Plasticity. 93: 187-211. DOI: 10.1016/J.Ijplas.2016.07.016 |
0.523 |
|
2017 |
Zecevic M, Pantleon W, Lebensohn RA, McCabe RJ, Knezevic M. Predicting intragranular misorientation distributions in polycrystalline metals using the viscoplastic self-consistent formulation Acta Materialia. 140: 398-410. DOI: 10.1016/J.Actamat.2017.08.056 |
0.446 |
|
2017 |
Jahedi M, McWilliams BA, Moy P, Knezevic M. Deformation twinning in rolled WE43-T5 rare earth magnesium alloy: Influence on strain hardening and texture evolution Acta Materialia. 131: 221-232. DOI: 10.1016/J.Actamat.2017.03.075 |
0.496 |
|
2017 |
Chelladurai I, Miles MP, Fullwood DT, Carsley JE, Mishra RK, Beyerlein IJ, Knezevic M. Microstructure Correlation with Formability for Biaxial Stretching of Magnesium Alloy AZ31B at Mildly Elevated Temperatures Jom. 69: 907-914. DOI: 10.1007/S11837-017-2309-7 |
0.364 |
|
2017 |
Knezevic M, Kalidindi SR. Crystal Plasticity Modeling of Microstructure Evolution and Mechanical Fields During Processing of Metals Using Spectral Databases Jom. 69: 830-838. DOI: 10.1007/S11837-017-2289-7 |
0.648 |
|
2017 |
Zecevic M, Knezevic M. Modeling of Sheet Metal Forming Based on Implicit Embedding of the Elasto-Plastic Self-Consistent Formulation in Shell Elements: Application to Cup Drawing of AA6022-T4 Jom. 69: 922-929. DOI: 10.1007/S11837-017-2255-4 |
0.459 |
|
2017 |
Jahedi M, Beyerlein IJ, Paydar MH, Zheng S, Xiong T, Knezevic M. Effects of Pressure and Number of Turns on Microstructural Homogeneity Developed in High-Pressure Double Torsion Metallurgical and Materials Transactions A. 48: 1249-1263. DOI: 10.1007/S11661-016-3923-7 |
0.343 |
|
2017 |
Risse M, Lentz M, Fahrenson C, Reimers W, Knezevic M, Beyerlein IJ. Elevated Temperature Effects on the Plastic Anisotropy of an Extruded Mg-4 Wt Pct Li Alloy: Experiments and Polycrystal Modeling Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 48: 446-458. DOI: 10.1007/S11661-016-3780-4 |
0.462 |
|
2017 |
Jahedi M, Beyerlein IJ, Paydar MH, Knezevic M. Effect of Grain Shape on Texture Formation during Severe Plastic Deformation of Pure Copper Advanced Engineering Materials. 20: 1600829. DOI: 10.1002/Adem.201600829 |
0.408 |
|
2016 |
Zecevic M, Roemer TJ, Knezevic M, Korkolis YP, Kinsey BL. Residual Ductility and Microstructural Evolution in Continuous-Bending-under-Tension of AA-6022-T4. Materials (Basel, Switzerland). 9. PMID 28773257 DOI: 10.3390/Ma9030130 |
0.426 |
|
2016 |
Zecevic M, Roemer TJ, Knezevic M, Korkolis YP, Kinsey BL. Residual ductility and microstructural evolution in Continuous-Bending-under-Tension of AA-6022-T4 Materials. 9. DOI: 10.3390/ma9030130 |
0.317 |
|
2016 |
Knezevic M, Daymond MR, Beyerlein IJ. Modeling discrete twin lamellae in a microstructural framework Scripta Materialia. 121: 84-88. DOI: 10.1016/J.Scriptamat.2016.04.026 |
0.456 |
|
2016 |
Zare H, Jahedi M, Toroghinejad MR, Meratian M, Knezevic M. Microstructure and mechanical properties of carbon nanotubes reinforced aluminum matrix composites synthesized via equal-channel angular pressing Materials Science and Engineering A. 670: 205-216. DOI: 10.1016/J.Msea.2016.06.027 |
0.332 |
|
2016 |
Zecevic M, Knezevic M, Beyerlein IJ, McCabe RJ. Origin of texture development in orthorhombic uranium Materials Science and Engineering A. 665: 108-124. DOI: 10.1016/J.Msea.2016.04.018 |
0.439 |
|
2016 |
Zare H, Jahedi M, Toroghinejad MR, Meratian M, Knezevic M. Compressive, shear, and fracture behavior of CNT reinforced Al matrix composites manufactured by severe plastic deformation Materials and Design. 106: 112-119. DOI: 10.1016/J.Matdes.2016.05.109 |
0.381 |
|
2016 |
Smith DH, Bicknell J, Jorgensen L, Patterson BM, Cordes NL, Tsukrov I, Knezevic M. Microstructure and mechanical behavior of direct metal laser sintered Inconel alloy 718 Materials Characterization. 113: 1-9. DOI: 10.1016/J.Matchar.2016.01.003 |
0.46 |
|
2016 |
Zecevic M, Knezevic M, Beyerlein IJ, McCabe RJ. Texture formation in orthorhombic alpha-uranium under simple compression and rolling to high strains Journal of Nuclear Materials. 473: 143-156. DOI: 10.1016/J.Jnucmat.2016.02.021 |
0.459 |
|
2016 |
Zecevic M, Korkolis YP, Kuwabara T, Knezevic M. Dual-phase steel sheets under cyclic tension–compression to large strains: Experiments and crystal plasticity modeling Journal of the Mechanics and Physics of Solids. 96: 65-87. DOI: 10.1016/J.Jmps.2016.07.003 |
0.506 |
|
2016 |
Zecevic M, Beyerlein IJ, McCabe RJ, McWilliams BA, Knezevic M. Transitioning rate sensitivities across multiple length scales: Microstructure-property relationships in the Taylor cylinder impact test on zirconium International Journal of Plasticity. DOI: 10.1016/J.Ijplas.2016.05.005 |
0.51 |
|
2016 |
Knezevic M, Crapps J, Beyerlein IJ, Coughlin DR, Clarke KD, McCabe RJ. Anisotropic modeling of structural components using embedded crystal plasticity constructive laws within finite elements International Journal of Mechanical Sciences. 105: 227-238. DOI: 10.1016/J.Ijmecsci.2015.11.021 |
0.457 |
|
2016 |
Gribbin S, Bicknell J, Jorgensen L, Tsukrov I, Knezevic M. Low cycle fatigue behavior of direct metal laser sintered Inconel alloy 718 International Journal of Fatigue. 93: 156-167. DOI: 10.1016/J.Ijfatigue.2016.08.019 |
0.423 |
|
2016 |
Knezevic M, Zecevic M, Beyerlein IJ, Lebensohn RA. A numerical procedure enabling accurate descriptions of strain rate-sensitive flow of polycrystals within crystal visco-plasticity theory Computer Methods in Applied Mechanics and Engineering. 308: 468-482. DOI: 10.1016/J.Cma.2016.05.025 |
0.471 |
|
2016 |
Ardeljan M, Savage DJ, Kumar A, Beyerlein IJ, Knezevic M. The plasticity of highly oriented nano-layered Zr/Nb composites Acta Materialia. 115: 189-203. DOI: 10.1016/J.Actamat.2016.05.058 |
0.488 |
|
2016 |
Lebensohn RA, Zecevic M, Knezevic M, McCabe RJ. Average intragranular misorientation trends in polycrystalline materials predicted by a viscoplastic self-consistent approach Acta Materialia. 104: 228-236. DOI: 10.1016/J.Actamat.2015.10.035 |
0.464 |
|
2015 |
Landry NW, Knezevic M. Delineation of First-Order Elastic Property Closures for Hexagonal Metals Using Fast Fourier Transforms. Materials (Basel, Switzerland). 8: 6326-6345. PMID 28793566 DOI: 10.3390/Ma8095303 |
0.379 |
|
2015 |
Jahedi M, Ardeljan M, Beyerlein IJ, Paydar MH, Knezevic M. Enhancement of orientation gradients during simple shear deformation by application of simple compression Journal of Applied Physics. 117. DOI: 10.1063/1.4922032 |
0.528 |
|
2015 |
Zecevic M, Knezevic M, Beyerlein IJ, Tomé CN. An elasto-plastic self-consistent model with hardening based on dislocation density, twinning and de-twinning: Application to strain path changes in HCP metals Materials Science and Engineering A. 638: 262-274. DOI: 10.1016/J.Msea.2015.04.066 |
0.497 |
|
2015 |
Lentz M, Klaus M, Wagner M, Fahrenson C, Beyerlein IJ, Zecevic M, Reimers W, Knezevic M. Effect of age hardening on the deformation behavior of an Mg-Y-Nd alloy: In-situ X-ray diffraction and crystal plasticity modeling Materials Science and Engineering A. 628: 396-409. DOI: 10.1016/J.Msea.2015.01.069 |
0.434 |
|
2015 |
Knezevic M, Landry NW. Procedures for reducing large datasets of crystal orientations using generalized spherical harmonics Mechanics of Materials. 88: 73-86. DOI: 10.1016/J.Mechmat.2015.04.014 |
0.436 |
|
2015 |
Zecevic M, McCabe RJ, Knezevic M. A new implementation of the spectral crystal plasticity framework in implicit finite elements Mechanics of Materials. 84: 114-126. DOI: 10.1016/J.Mechmat.2015.01.018 |
0.473 |
|
2015 |
Jahedi M, Paydar MH, Knezevic M. Enhanced microstructural homogeneity in metal-matrix composites developed under high-pressure-double-torsion Materials Characterization. 104: 92-100. DOI: 10.1016/J.Matchar.2015.04.012 |
0.364 |
|
2015 |
McCabe RJ, Richards AW, Coughlin DJ, Clarke KD, Beyerlein IJ, Knezevic M. Microstructure effects on the recrystallization of low-symmetry alpha-uranium Journal of Nuclear Materials. 465: 189-195. DOI: 10.1016/J.Jnucmat.2015.04.055 |
0.39 |
|
2015 |
Ardeljan M, Beyerlein IJ, McWilliams BA, Knezevic M. Strain rate and temperature sensitive multi-level crystal plasticity model for large plastic deformation behavior: Application to AZ31 magnesium alloy International Journal of Plasticity. DOI: 10.1016/J.Ijplas.2016.04.005 |
0.551 |
|
2015 |
Ardeljan M, Knezevic M, Nizolek T, Beyerlein IJ, Mara NA, Pollock TM. A study of microstructure-driven strain localizations in two-phase polycrystalline HCP/BCC composites using a multi-scale model International Journal of Plasticity. 74: 35-57. DOI: 10.1016/J.Ijplas.2015.06.003 |
0.495 |
|
2015 |
Zecevic M, Knezevic M. A dislocation density based elasto-plastic self-consistent model for the prediction of cyclic deformation: Application to AA6022-T4 International Journal of Plasticity. 72: 200-217. DOI: 10.1016/J.Ijplas.2015.05.018 |
0.461 |
|
2015 |
Zecevic M, McCabe RJ, Knezevic M. Spectral database solutions to elasto-viscoplasticity within finite elements: Application to a cobalt-based FCC superalloy International Journal of Plasticity. 70: 151-165. DOI: 10.1016/J.Ijplas.2015.03.007 |
0.515 |
|
2015 |
Ardeljan M, McCabe RJ, Beyerlein IJ, Knezevic M. Explicit incorporation of deformation twins into crystal plasticity finite element models Computer Methods in Applied Mechanics and Engineering. 295: 396-413. DOI: 10.1016/J.Cma.2015.07.003 |
0.51 |
|
2015 |
Carpenter JS, Nizolek T, McCabe RJ, Knezevic M, Zheng SJ, Eftink BP, Scott JE, Vogel SC, Pollock TM, Mara NA, Beyerlein IJ. Bulk texture evolution of nanolamellar Zr-Nb composites processed via accumulative roll bonding Acta Materialia. 92: 97-108. DOI: 10.1016/J.Actamat.2015.03.020 |
0.417 |
|
2015 |
Knezevic M, Zecevic M, Beyerlein IJ, Bingert JF, McCabe RJ. Strain rate and temperature effects on the selection of primary and secondary slip and twinning systems in HCP Zr Acta Materialia. 88: 55-73. DOI: 10.1016/J.Actamat.2015.01.037 |
0.431 |
|
2015 |
Lentz M, Klaus M, Beyerlein IJ, Zecevic M, Reimers W, Knezevic M. In situ X-ray diffraction and crystal plasticity modeling of the deformation behavior of extruded Mg-Li-(Al) alloys: An uncommon tension-compression asymmetry Acta Materialia. 86: 254-268. DOI: 10.1016/J.Actamat.2014.12.003 |
0.448 |
|
2015 |
Knezevic M, Zecevic M, Beyerlein IJ, Bhattacharyya A, McCabe RJ. Predicting Texture Evolution in Ta and Ta-10W Alloys Using Polycrystal Plasticity Jom. DOI: 10.1007/S11837-015-1613-3 |
0.651 |
|
2015 |
Jahedi M, Knezevic M, Paydar MH. High-Pressure Double Torsion as a Severe Plastic Deformation Process: Experimental Procedure and Finite Element Modeling Journal of Materials Engineering and Performance. 24: 1471-1482. DOI: 10.1007/S11665-015-1426-0 |
0.391 |
|
2015 |
Savage DJ, Knezevic M. Computer implementations of iterative and non-iterative crystal plasticity solvers on high performance graphics hardware Computational Mechanics. 56: 677-690. DOI: 10.1007/S00466-015-1194-6 |
0.354 |
|
2014 |
Jahedi M, Paydar MH, Zheng S, Beyerlein IJ, Knezevic M. Texture evolution and enhanced grain refinement under high-pressure-double-torsion Materials Science and Engineering A. 611: 29-36. DOI: 10.1016/J.Msea.2014.05.081 |
0.438 |
|
2014 |
Ardeljan M, Beyerlein IJ, Knezevic M. A dislocation density based crystal plasticity finite element model: Application to a two-phase polycrystalline HCP/BCC composites Journal of the Mechanics and Physics of Solids. 66: 16-31. DOI: 10.1016/J.Jmps.2014.01.006 |
0.56 |
|
2014 |
Knezevic M, Beyerlein IJ, Lovato ML, Tomé CN, Richards AW, McCabe RJ. A strain-rate and temperature dependent constitutive model for BCC metals incorporating non-Schmid effects: Application to tantalum-tungsten alloys International Journal of Plasticity. 62: 93-104. DOI: 10.1016/J.Ijplas.2014.07.007 |
0.509 |
|
2014 |
Knezevic M, Nizolek T, Ardeljan M, Beyerlein IJ, Mara NA, Pollock TM. Texture evolution in two-phase Zr/Nb lamellar composites during accumulative roll bonding International Journal of Plasticity. 57: 16-28. DOI: 10.1016/J.Ijplas.2014.01.008 |
0.457 |
|
2014 |
Knezevic M, Jahedi M, Korkolis YP, Beyerlein IJ. Material-based design of the extrusion of bimetallic tubes Computational Materials Science. 95: 63-73. DOI: 10.1016/J.Commatsci.2014.07.021 |
0.415 |
|
2014 |
Knezevic M, Savage DJ. A high-performance computational framework for fast crystal plasticity simulations Computational Materials Science. 83: 101-106. DOI: 10.1016/J.Commatsci.2013.11.012 |
0.425 |
|
2014 |
Knezevic M, Drach B, Ardeljan M, Beyerlein IJ. Three dimensional predictions of grain scale plasticity and grain boundaries using crystal plasticity finite element models Computer Methods in Applied Mechanics and Engineering. 277: 239-259. DOI: 10.1016/J.Cma.2014.05.003 |
0.418 |
|
2014 |
Knezevic M, Carpenter JS, Lovato ML, McCabe RJ. Deformation behavior of the cobalt-based superalloy Haynes 25: Experimental characterization and crystal plasticity modeling Acta Materialia. 63: 162-168. DOI: 10.1016/J.Actamat.2013.10.021 |
0.536 |
|
2014 |
Bhattacharyya A, Knezevic M, Abouaf M. Characterization of Crystallographic Texture and Intra-Grain Morphology in Cross-Rolled Tantalum Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 46: 1085-1096. DOI: 10.1007/S11661-014-2686-2 |
0.589 |
|
2014 |
Mihaila B, Knezevic M, Cardenas A. Three orders of magnitude improved efficiency with high-performance spectral crystal plasticity on GPU platforms International Journal For Numerical Methods in Engineering. 97: 785-798. DOI: 10.1002/Nme.4592 |
0.453 |
|
2013 |
Knezevic M, Beyerlein IJ, Nizolek T, Mara NA, Pollock TM. Anomalous Basal Slip Activity in Zirconium under High-strain Deformation Materials Research Letters. 1: 133-140. DOI: 10.1080/21663831.2013.794375 |
0.432 |
|
2013 |
Knezevic M, Lebensohn RA, Cazacu O, Revil-Baudard B, Proust G, Vogel SC, Nixon ME. Modeling bending of α-titanium with embedded polycrystal plasticity in implicit finite elements Materials Science and Engineering A. 564: 116-126. DOI: 10.1016/J.Msea.2012.11.037 |
0.473 |
|
2013 |
Knezevic M, McCabe RJ, Lebensohn RA, Tomé CN, Liu C, Lovato ML, Mihaila B. Integration of self-consistent polycrystal plasticity with dislocation density based hardening laws within an implicit finite element framework: Application to low-symmetry metals Journal of the Mechanics and Physics of Solids. 61: 2034-2046. DOI: 10.1016/J.Jmps.2013.05.005 |
0.478 |
|
2013 |
Knezevic M, Beyerlein IJ, Brown DW, Sisneros TA, Tomé CN. A polycrystal plasticity model for predicting mechanical response and texture evolution during strain-path changes: Application to beryllium International Journal of Plasticity. 49: 185-198. DOI: 10.1016/J.Ijplas.2013.03.008 |
0.507 |
|
2013 |
Knezevic M, McCabe RJ, Tomé CN, Lebensohn RA, Chen SR, Cady CM, Gray GT, Mihaila B. Modeling mechanical response and texture evolution of α-uranium as a function of strain rate and temperature using polycrystal plasticity International Journal of Plasticity. 43: 70-84. DOI: 10.1016/J.Ijplas.2012.10.011 |
0.467 |
|
2012 |
Knezevic M, Capolungo L, Tomé CN, Lebensohn RA, Alexander DJ, Mihaila B, McCabe RJ. Anisotropic stress-strain response and microstructure evolution of textured α-uranium Acta Materialia. 60: 702-715. DOI: 10.1016/J.Actamat.2011.10.041 |
0.481 |
|
2012 |
Knezevic M, McCabe RJ, Lebensohn RA, Tomé CN, Mihaila B. Finite element implementation of a self-consistent polycrystal plasticity model: Application to α-uranium Tms Annual Meeting. 2: 789-796. |
0.301 |
|
2010 |
Al-Harbi HF, Knezevic M, Kalidindi SR. Spectral approaches for the fast computation of yield surfaces and first-order plastic property closures for polycrystalline materials with cubic-triclinic textures Computers, Materials and Continua. 15: 153-172. DOI: 10.3970/Cmc.2010.015.153 |
0.595 |
|
2010 |
Shaffer JB, Knezevic M, Kalidindi SR. Building texture evolution networks for deformation processing of polycrystalline fcc metals using spectral approaches: Applications to process design for targeted performance International Journal of Plasticity. 26: 1183-1194. DOI: 10.1016/J.Ijplas.2010.03.010 |
0.623 |
|
2010 |
Knezevic M, Levinson A, Harris R, Mishra RK, Doherty RD, Kalidindi SR. Deformation twinning in AZ31: Influence on strain hardening and texture evolution Acta Materialia. 58: 6230-6242. DOI: 10.1016/J.Actamat.2010.07.041 |
0.774 |
|
2009 |
Kalidindi SR, Knezevic M, Niezgoda S, Shaffer J. Representation of the orientation distribution function and computation of first-order elastic properties closures using discrete Fourier transforms Acta Materialia. 57: 3916-3923. DOI: 10.1016/J.Actamat.2009.04.055 |
0.587 |
|
2009 |
Fromm BS, Adams BL, Ahmadi S, Knezevic M. Grain size and orientation distributions: Application to yielding of α-titanium Acta Materialia. 57: 2339-2348. DOI: 10.1016/J.Actamat.2008.12.037 |
0.411 |
|
2009 |
Knezevic M, Al-Harbi HF, Kalidindi SR. Crystal plasticity simulations using discrete Fourier transforms Acta Materialia. 57: 1777-1784. DOI: 10.1016/J.Actamat.2008.12.017 |
0.617 |
|
2008 |
Knezevic M, Kalidindi SR, Fullwood D. Computationally efficient database and spectral interpolation for fully plastic Taylor-type crystal plasticity calculations of face-centered cubic polycrystals International Journal of Plasticity. 24: 1264-1276. DOI: 10.1016/J.Ijplas.2007.12.002 |
0.597 |
|
2008 |
Knezevic M, Kalidindi SR, Mishra RK. Delineation of first-order closures for plastic properties requiring explicit consideration of strain hardening and crystallographic texture evolution International Journal of Plasticity. 24: 327-342. DOI: 10.1016/J.Ijplas.2007.05.002 |
0.661 |
|
2008 |
Fast T, Knezevic M, Kalidindi SR. Application of microstructure sensitive design to structural components produced from hexagonal polycrystalline metals Computational Materials Science. 43: 374-383. DOI: 10.1016/J.Commatsci.2007.12.002 |
0.572 |
|
2007 |
Duvvuru HK, Knezevic M, Mishra RK, Kalidindi SR. Application of microstructure sensitive design to FCC polycrystals Materials Science Forum. 546: 675-680. DOI: 10.4028/Www.Scientific.Net/Msf.546-549.675 |
0.741 |
|
2007 |
Knezevic M, Kalidindi SR. Fast computation of first-order elastic-plastic closures for polycrystalline cubic-orthorhombic microstructures Computational Materials Science. 39: 643-648. DOI: 10.1016/J.Commatsci.2006.08.025 |
0.614 |
|
2007 |
Wu X, Proust G, Knezevic M, Kalidindi SR. Elastic-plastic property closures for hexagonal close-packed polycrystalline metals using first-order bounding theories Acta Materialia. 55: 2729-2737. DOI: 10.1016/J.Actamat.2006.12.010 |
0.71 |
|
2006 |
Kalidindi SR, Duvvuru HK, Knezevic M. Spectral calibration of crystal plasticity models Acta Materialia. 54: 1795-1804. DOI: 10.1016/J.Actamat.2005.12.018 |
0.747 |
|
Show low-probability matches. |