Year |
Citation |
Score |
2014 |
Hou C, Czubernat K, Jin SY, Altenhof W, Maeva E, Seviaryna I, Bandyopadhyay-Ghosh S, Sain M, Gu R. Mechanical response of hard bio-based PU foams under cyclic quasi-static compressive loading conditions International Journal of Fatigue. 59: 76-89. DOI: 10.1016/J.Ijfatigue.2013.09.012 |
0.635 |
|
2012 |
Jin SY, Altenhof W, Li Z. A parametric study on extrusion geometry and blade quantity during axial cutting deformation of circular AA6061-T6 extrusions under impact and quasi-static loading International Journal of Impact Engineering. 49: 165-178. DOI: 10.1016/J.Ijimpeng.2012.03.008 |
0.722 |
|
2011 |
Jin SY, Altenhof W. Mechanical Performance of Circular AA6061-T6 Extrusions Under Axial Cutting Deformation Sae International Journal of Materials and Manufacturing. 4: 84-97. DOI: 10.4271/2011-01-0022 |
0.675 |
|
2011 |
Jin SY, Altenhof W. An analytical model on the steady-state deformation of circular tubes under an axial cutting deformation mode International Journal of Solids and Structures. 48: 269-279. DOI: 10.1016/J.Ijsolstr.2010.10.001 |
0.688 |
|
2011 |
Jin SY, Altenhof W. Control of load/displacement responses of AA6061-T6 and T4 circular extrusions under axial compressive loads International Journal of Impact Engineering. 38: 1-12. DOI: 10.1016/J.Ijimpeng.2010.09.001 |
0.736 |
|
2011 |
Turton N, Jin SY, Majumder A, An H, Vijayan V, Altenhof W, Green D. Experimentally Observed Strain Distributions Near Circular Discontinuities of AA6061-T6 Extrusions During Axial Crush Experimental Mechanics. 51: 111-129. DOI: 10.1007/S11340-010-9343-5 |
0.653 |
|
2010 |
Jin SY, Altenhof WJ. An Experimental Study Investigating the Influence of the Number of Blades in a Cutter Used in Axial Cutting of AA6061-T6 and T4 Round Tubes Sae International Journal of Materials and Manufacturing. 3: 174-185. DOI: 10.4271/2010-01-0380 |
0.653 |
|
2010 |
Jin SY, Majumder A, Altenhof W, Green D. Axial cutting of AA6061-T6 circular extrusions under impact using single- and dual-cutter configurations International Journal of Impact Engineering. 37: 735-753. DOI: 10.1016/J.Ijimpeng.2009.01.003 |
0.734 |
|
2009 |
Majumder A, Altenhof W, Jin SY, Kapoor T, Green D. Simulation of the axial cutting deformation of AA6061-T6 round tubes utilizing eulerian and mesh free finite element formulations Sae International Journal of Materials and Manufacturing. 1: 525-536. DOI: 10.4271/2008-01-1117 |
0.632 |
|
2008 |
Jin SY, Altenhof W. Experimental observations of AA6061-T6 round extrusions under a cutting deformation mode with a deflector International Journal of Crashworthiness. 13: 127-138. DOI: 10.1080/13588260701740113 |
0.725 |
|
2007 |
Jin SY, Altenhof W. Comparison of the load/displacement and energy absorption performance of round and square AA6061-T6 extrusions under a cutting deformation mode International Journal of Crashworthiness. 12: 265-278. DOI: 10.1080/13588260701441183 |
0.712 |
|
2006 |
Cheng Q, Altenhof W, Jin SY, Powell C, Harte A. Energy absorption of aluminum foam filled braided stainless steel tubes under quasi-static tensile loading conditions International Journal of Mechanical Sciences. 48: 1223-1233. DOI: 10.1016/J.Ijmecsci.2006.06.009 |
0.669 |
|
Show low-probability matches. |