| Year |
Citation |
Score |
| 2006 |
Srinivasagupta D, Kardos JL, Joseph B. Analysis of pull-force in injected pultrusion Journal of Advanced Materials. 38: 39-46. |
0.772 |
|
| 2005 |
Dudukovic MP, Kardos JL, McKelvey JM, Motard RL. Washington University in St. Louis Chemical Engineering Education. 39: 170-177. |
0.64 |
|
| 2004 |
Srinivasagupta D, Kardos JL. Ecologically and economically conscious design of the injected pultrusion process via multi-objective optimization Modelling and Simulation in Materials Science and Engineering. 12. DOI: 10.1088/0965-0393/12/3/S10 |
0.766 |
|
| 2003 |
Srinivasagupta D, Kardos JL, Joseph B. Rigorous dynamic model-based economic design of the injected pultrusion process with controllability considerations Journal of Composite Materials. 37: 1851-1880. DOI: 10.1177/002199803036241 |
0.793 |
|
| 2003 |
Srinivasagupta D, Potaraju S, Kardos JL, Joseph B. Steady state and dynamic analysis of a bench-scale injected pultrusion process Composites Part a: Applied Science and Manufacturing. 34: 835-846. DOI: 10.1016/S1359-835X(03)00182-9 |
0.652 |
|
| 2001 |
Lin B, Sureshkumar R, Kardos JL. Electropolymerization of pyrrole on PAN-based carbon fibers: Experimental observations and a multiscale modeling approach Chemical Engineering Science. 56: 6563-6575. DOI: 10.1016/S0009-2509(01)00313-X |
0.362 |
|
| 2000 |
Potaraju S, Joseph B, Khomami B, Kardos JL. A flexible approach to modeling and simulation of polymeric composite materials processing using object oriented techniques Computers and Chemical Engineering. 24: 1961-1980. DOI: 10.1016/S0098-1354(00)00595-0 |
0.682 |
|
| 1999 |
Voorakaranam S, Joseph B, Kardos JL. Modeling and Control of an Injection Pultrusion Process Journal of Composite Materials. 33: 1173-1204. DOI: 10.1177/002199839903301302 |
0.628 |
|
| 1999 |
Mustafa I, Khomami B, Kardos JL. 3-D nonisothermal flow simulation model for injected pultrusion processes Aiche Journal. 45: 151-163. DOI: 10.1002/Aic.690450113 |
0.647 |
|
| 1999 |
Voorakaranam S, Joseph B, Kardos JL. Use of process models to control and optimize pultrusion-type processes Sampe Journal. 35: 64-72. |
0.386 |
|
| 1999 |
Voorakaranam S, Joseph B, Kardos JL. Modeling and control of an injection pultrusion process Journal of Composite Materials. 33: 1173-1204. |
0.353 |
|
| 1998 |
Voorakaranam S, Kardos JL, Joseph B. Model-based control of injection pultrusion process Proceedings of the American Control Conference. 6: 3376-3380. DOI: 10.1109/ACC.1998.703203 |
0.384 |
|
| 1998 |
Kommu S, Khomami B, Kardos JL. Modeling of injected pultrusion processes: A numerical approach Polymer Composites. 19: 335-346. DOI: 10.1002/Pc.10106 |
0.61 |
|
| 1997 |
Lai YH, Khomami B, Kardos JL. Accurate permeability characterization of preforms used in polymer matrix composite fabrication processes Polymer Composites. 18: 368-377. DOI: 10.1002/Pc.10288 |
0.581 |
|
| 1997 |
Thomas MM, Joseph B, Kardos JL. Experimental characterization of autoclave-cured glass-epoxy composite laminates: Cure cycle effects upon thickness, void content, and related phenomena Polymer Composites. 18: 283-299. DOI: 10.1002/Pc.10282 |
0.582 |
|
| 1997 |
Thomas MM, Joseph B, Kardos JL. Batch chemical process quality control applied to curing of composite materials Aiche Journal. 43: 2535-2545. DOI: 10.1002/Aic.690431015 |
0.602 |
|
| 1997 |
Vasat JL, Kardos JL. Devolatilization in the processing of AFR700B polyimide resin composites International Sampe Technical Conference. 29: 665-674. |
0.371 |
|
| 1997 |
Thomas MM, Joseph B, Kardos JL. Batch Chemical Process Quality Control Applied to Curing of Composite Materials Aiche Journal. 43: 2535-2545. |
0.305 |
|
| 1995 |
Joseph B, Hanratty FW, Kardos JL. Model Based Control of Voids and Product Thickness during Autoclave Curing of Carbon/Epoxy Composite Laminates Journal of Composite Materials. 29: 1000-1024. DOI: 10.1177/002199839502900801 |
0.64 |
|
| 1995 |
Cho B‐, Kardos JL. Consolidation and self‐bonding in poly(ether ether ketone) (PEEK) Journal of Applied Polymer Science. 56: 1435-1454. DOI: 10.1002/App.1995.070561106 |
0.314 |
|
| 1994 |
Yoon IS, Yang Y, Duduković MP, Kardos JL. The devolatilization of polyimide fiber composites: Model and experimental verification Polymer Composites. 15: 184-196. DOI: 10.1002/Pc.750150304 |
0.419 |
|
| 1994 |
Skartsis L, Khomami B, Kardos JL. Semi-analytical one-dimensional model for viscoelastic impregnation of fibrous media Journal of Advanced Materials. 25: 38-44. |
0.563 |
|
| 1992 |
Skartsis L, Khomami B, Kardos JL. Polymeric flow through fibrous media Journal of Rheology. 36: 589-620. DOI: 10.1122/1.550365 |
0.607 |
|
| 1992 |
Skartsis L, Khomami B, Kardos JL. Resin flow through fiber beds during composite manufacturing processes. Part II: Numerical and experimental studies of newtonian flow through ideal and actual fiber beds Polymer Engineering and Science. 32: 231-239. DOI: 10.1002/Pen.760320403 |
0.608 |
|
| 1992 |
Skartsis L, Kardos JL, Khomami B. Resin flow through fiber beds during composite manufacturing processes. Part I: Review of newtonian flow through fiber beds Polymer Engineering and Science. 32: 221-230. DOI: 10.1002/Pen.760320402 |
0.585 |
|
| 1991 |
Lam RC, Kardos JL. The permeability and compressibility of aligned and cross‐plied carbon fiber beds during processing of composites Polymer Engineering and Science. 31: 1064-1070. DOI: 10.1002/Pen.760311411 |
0.336 |
|
| 1990 |
Duduković MP, Kardos JL, Yoon IS, Yang YB. Autoclave processing of long fiber thermoplastic composites Chemical Engineering Science. 45: 2519-2526. DOI: 10.1016/0009-2509(90)80137-4 |
0.426 |
|
| 1987 |
Pollard M, Kardos JL. ANALYSIS OF EPOXY RESIN CURING KINETICS USING THE AVRAMI THEORY OF PHASE CHANGE Polymer Engineering and Science. 27: 829-836. DOI: 10.1002/Pen.760271110 |
0.41 |
|
| 1987 |
Dave R, Kardos JL, Duduković MP. A model for resin flow during composite processing part 2: Numerical analysis for unidirectional graphite/epoxy laminates Polymer Composites. 8: 123-132. DOI: 10.1002/Pc.750080209 |
0.393 |
|
| 1987 |
Dave R, Kardos JL, Duduković MP. A model for resin flow during composite processing: Part 1—general mathematical development Polymer Composites. 8: 29-38. DOI: 10.1002/Pc.750080106 |
0.39 |
|
| 1987 |
Dave R, Kardos JL, Choi SJ, Dudukovic MP. AUTOCLAVE VS. NON-AUTOCLAVE COMPOSITE PROCESSING Int Sampe Symp Exhib. 32: 325-337. |
0.34 |
|
| 1984 |
Dave R, Kardos JL, Dudukovic MP. VOID STABILITY AND TRANSPORT DURING PROCESSING OF THERMOSETTING-MATRIX COMPOSITES American Institute of Chemical Engineers, National Meeting. |
0.321 |
|
| 1983 |
Halpin JC, Kardos JL, Dudukovic’ MP. Processing science: An approach for prepreg composite systems Pure and Applied Chemistry. 55: 893-906. DOI: 10.1351/Pac198355050893 |
0.406 |
|
| 1979 |
Kardos JL, Raisoni J, Piccarlo S, Halpin JC. PREDICTION AND MEASUREMENT OF THE THERMAL EXPANSION COEFFICIENT OF CRYSTALLINE POLYMERS Polymer Engineering and Science. 19: 1000-1009. DOI: 10.1002/Pen.760191407 |
0.327 |
|
| 1978 |
Kardos JL, Piccarolo S, Halpin JC. Strength of discontinuous reinforced composites: II. Isotropic crystalline polymers Polymer Engineering and Science. 18: 505-511. DOI: 10.1002/Pen.760180613 |
0.324 |
|
| 1978 |
Mehta BS, Dibenedetto AT, Kardos JL. PREDICTION OF TRANSPORT PROPERTIES OF COMPOSITES FROM EQUATIONS OF ELASTICITY Polymer Engineering and Science. 18: 114-119. DOI: 10.1002/Pen.760180209 |
0.309 |
|
| 1975 |
Kardos JL, Raisoni J. The potential mechanical response of macromolecular systems—A composite analogy Polymer Engineering and Science. 15: 183-190. DOI: 10.1002/Pen.760150310 |
0.328 |
|
| 1973 |
Kardos JL. Structure property relations in short-fiber reinforced plastics C R C Critical Reviews in Solid State Sciences. 3: 419-450. DOI: 10.1080/10408437308244870 |
0.328 |
|
| 1973 |
Kardos JL, Cheng FS, Tolbert TL. Tailoring the interface in graphite‐reinforced polycarbonate Polymer Engineering &Amp; Science. 13: 455-461. DOI: 10.1002/Pen.760130610 |
0.339 |
|
| 1966 |
Kardos JL, Christiansen AW, Baer E. Structure of pressure-crystallized polypropylene Journal of Polymer Science Part a-2: Polymer Physics. 4: 777-788. DOI: 10.1002/Pol.1966.160040509 |
0.323 |
|
| 1965 |
Kardos JL, Baer E, Geil PH, Koenig JL. Differential thermal analysis of pressure crystallized polyethylene Kolloid-Zeitschrift & Zeitschrift FüR Polymere. 204: 1-7. DOI: 10.1007/BF01500371 |
0.335 |
|
| 1965 |
Baer E, Kardos JL. Melting of homopolymers under pressure Journal of Polymer Science Part A. 3: 2827-2841. DOI: 10.1002/Pol.1965.100030810 |
0.364 |
|
| Show low-probability matches. |
