Year |
Citation |
Score |
2020 |
Han J, Kim W, Bae C, Lee D, Shin S, Nam Y, Lee C. Contact time on curved superhydrophobic surfaces. Physical Review. E. 101: 043108. PMID 32422796 DOI: 10.1103/Physreve.101.043108 |
0.363 |
|
2020 |
Shin S, Chergui J, Juric D. Interaction of a Deformable Solid with Two‐Phase Flows: An Eulerian based Numerical Model for Fluid‐Structure Interaction using the Level Contour Reconstruction Method International Journal For Numerical Methods in Fluids. DOI: 10.1002/Fld.4836 |
0.319 |
|
2018 |
Kahouadji L, Nowak E, Kovalchuk N, Chergui J, Juric D, Shin S, Simmons MJH, Craster RV, Matar OK. Simulation of immiscible liquid-liquid flows in complex microchannel geometries using a front-tracking scheme. Microfluidics and Nanofluidics. 22: 126. PMID 30930706 DOI: 10.1007/S10404-018-2149-Y |
0.416 |
|
2018 |
Shin S, Chergui J, Juric D, Kahouadji L, Matar OK, Craster RV. A hybrid interface tracking – level set technique for multiphase flow with soluble surfactant Journal of Computational Physics. 359: 409-435. DOI: 10.1016/J.Jcp.2018.01.010 |
0.394 |
|
2018 |
Choi B, Choi J, Heo S, Shin S. Parametric investigation of the effect from controlling variables on thermal deformation during stamping process in automotive body part Applied Thermal Engineering. 140: 373-385. DOI: 10.1016/J.Applthermaleng.2018.05.056 |
0.301 |
|
2018 |
Choi J, Choi B, Heo S, Oh Y, Shin S. Numerical modeling of the thermal deformation during stamping process of an automotive body part Applied Thermal Engineering. 128: 159-172. DOI: 10.1016/J.Applthermaleng.2017.09.001 |
0.352 |
|
2018 |
Lee T, Shin S, Abdel-Khalik SI. Parametric investigation of particulate flow in interconnected porous media for central particle-heating receiver Journal of Mechanical Science and Technology. 32: 1181-1186. DOI: 10.1007/S12206-018-0221-X |
0.583 |
|
2018 |
Shin S, Chergui J, Juric D. Direct simulation of multiphase flows with modeling of dynamic interface contact angle Theoretical and Computational Fluid Dynamics. 32: 655-687. DOI: 10.1007/S00162-018-0470-4 |
0.395 |
|
2017 |
Seo D, Oh S, Shin S, Nam Y. Dynamic heat transfer analysis of condensed droplets growing and coalescing on water repellent surfaces International Journal of Heat and Mass Transfer. 114: 934-943. DOI: 10.1016/J.Ijheatmasstransfer.2017.06.129 |
0.413 |
|
2017 |
Shin S, Chergui J, Juric D. A solver for massively parallel direct numerical simulation of three-dimensional multiphase flows Journal of Mechanical Science and Technology. 31: 1739-1751. DOI: 10.1007/S12206-017-0322-Y |
0.418 |
|
2016 |
Shin S, Choi B. Numerical simulation of a rising bubble with phase change Applied Thermal Engineering. 100: 256-266. DOI: 10.1016/J.Applthermaleng.2016.02.025 |
0.377 |
|
2016 |
Yoon I, Shin S. Numerical investigation of interaction between rising bubbles in a viscous liquid Journal of Mechanical Science and Technology. 30: 3165-3172. DOI: 10.1007/S12206-016-0627-2 |
0.397 |
|
2016 |
Xu B, Chergui J, Shin S, Juric D. Three-dimensional simulations of viscous folding in diverging microchannels Microfluidics and Nanofluidics. 20. DOI: 10.1007/S10404-016-1803-5 |
0.372 |
|
2015 |
Lee C, Nam Y, Lastakowski H, Hur JI, Shin S, Biance AL, Pirat C, Kim CJ, Ybert C. Two types of Cassie-to-Wenzel wetting transitions on superhydrophobic surfaces during drop impact. Soft Matter. 11: 4592-9. PMID 25959867 DOI: 10.1039/C5Sm00825E |
0.38 |
|
2015 |
Nam Y, Seo D, Lee C, Shin S. Droplet coalescence on water repellant surfaces. Soft Matter. 11: 154-60. PMID 25375970 DOI: 10.1039/C4Sm01647E |
0.324 |
|
2015 |
Lee T, Lim S, Shin S, Sadowski DL, Abdel-Khalik SI, Jeter SM, Al-Ansary H. Numerical simulation of particulate flow in interconnected porous media for central particle-heating receiver applications Solar Energy. 113: 14-24. DOI: 10.1016/J.Solener.2014.12.017 |
0.601 |
|
2015 |
Lim S, Park S, Chung H, Kim M, Baik YJ, Shin S. Dynamic modeling of building heat network system using Simulink Applied Thermal Engineering. 84: 375-389. DOI: 10.1016/J.Applthermaleng.2015.03.068 |
0.353 |
|
2015 |
Lee PH, Lee SW, Lim SH, Lee SH, Ko HS, Shin SW. A study on thermal characteristics of micro-scale grinding process using nanofluid minimum quantity lubrication (MQL) International Journal of Precision Engineering and Manufacturing. 16: 1899-1909. DOI: 10.1007/S12541-015-0247-2 |
0.432 |
|
2014 |
Jang B, Shin S, Lee J, Kim J. Numerical and experimental evaluations on new direct growth process of polycrystalline silicon wafer from liquid silicon Journal of Crystal Growth. 394: 145-152. DOI: 10.1016/J.Jcrysgro.2014.02.006 |
0.303 |
|
2014 |
Lim S, Kang Y, Lee H, Shin S. Design optimization of a tubular solar receiver with a porous medium Applied Thermal Engineering. 62: 566-572. DOI: 10.1016/J.Applthermaleng.2013.10.025 |
0.391 |
|
2014 |
Shin S, Chung H, Kim M. Exergy performance analysis of the conceptual district energy network system with heat pump Journal of Mechanical Science and Technology. 28: 3325-3333. DOI: 10.1007/S12206-014-0743-9 |
0.304 |
|
2013 |
Lee C, Yoon W, Shin S, Lee J, Jang BY, Kim J, Ahn Y, Lee J. Numerical simulation of solid liquid interface behavior during continuous strip casting process. Journal of Nanoscience and Nanotechnology. 13: 3346-9. PMID 23858856 DOI: 10.1166/Jnn.2013.7313 |
0.434 |
|
2013 |
Lee C, Yoon W, Shin S, Lee J, Song HE. Analysis of Solid-Liquid Interface Behavior during Continuous Strip-Casting Process Using Sharp-Interface Technique International Journal of Photoenergy. 2013: 171936. DOI: 10.1155/2013/171936 |
0.407 |
|
2013 |
Chung H, Shin S. Heat transfer enhancement in a high aspect ratio channel with system optimization Numerical Heat Transfer Part a-Applications. 63: 604-622. DOI: 10.1080/10407782.2012.750996 |
0.376 |
|
2013 |
Nam Y, Kim H, Shin S. Energy and hydrodynamic analyses of coalescence-induced jumping droplets Applied Physics Letters. 103: 161601. DOI: 10.1063/1.4825273 |
0.349 |
|
2013 |
Lee D, Ahn J, Shin S. Uneven longitudinal pitch effect on tube bank heat transfer in cross flow Applied Thermal Engineering. 51: 937-947. DOI: 10.1016/J.Applthermaleng.2012.10.031 |
0.406 |
|
2012 |
Jang HB, Yoon I, Kim CH, Shin S, Chung SW. Quantifying Architectural Impact of Liquid Cooling for 3D Multi-Core Processors Journal of Semiconductor Technology and Science. 12: 297-312. DOI: 10.5573/Jsts.2012.12.3.297 |
0.363 |
|
2012 |
Shin S. Direct numerical simulation of rising bubble interaction with free surface using level contour reconstruction method Journal of Mechanical Science and Technology. 26: 3141-3148. DOI: 10.1007/S12206-012-0819-3 |
0.447 |
|
2011 |
Lee J, Shin S, Chung H. Numerical Prediction of Product Deformation and Identification of Major Controlling Factors during the IML Process Including Thermal Impact Numerical Heat Transfer Part a-Applications. 60: 485-498. DOI: 10.1080/10407782.2011.609083 |
0.385 |
|
2011 |
Shin S, Yoon I, Juric D. The Local Front Reconstruction Method for direct simulation of two- and three-dimensional multiphase flows Journal of Computational Physics. 230: 6605-6646. DOI: 10.1016/J.Jcp.2011.04.040 |
0.356 |
|
2010 |
Lee J, Jang E, Shin S, Park S, Chung H. Prediction of Residual Stress Caused by IML Process and Deformation Due to Thermal Impact Transactions of the Korean Society of Mechanical Engineers A. 34: 375-382. DOI: 10.3795/Ksme-A.2010.34.3.375 |
0.385 |
|
2009 |
Yoon I, Shin S. Numerical simulation of dendritic growth of the multiple seeds with fluid flow Transactions of the Korean Society of Mechanical Engineers, B. 33: 469-476. DOI: 10.3795/Ksme-B.2009.33.7.469 |
0.376 |
|
2009 |
Shin S, Chung H. Modeling of melting, evaporating, and resolidifying procedure in laser-induced metal processing Journal of Manufacturing Science and Engineering-Transactions of the Asme. 131: 24501. DOI: 10.1115/1.3063654 |
0.432 |
|
2009 |
Shin S, Juric D. Simulation of droplet impact on a solid surface using the level contour reconstruction method Journal of Mechanical Science and Technology. 23: 2434-2443. DOI: 10.1007/S12206-009-0621-Z |
0.402 |
|
2009 |
Shin S. Direct numerical simulation of multiphase flow for arbitrary geometry using level contour reconstruction method Journal of Mechanical Science and Technology. 23: 1795-1800. DOI: 10.1007/S12206-009-0605-Z |
0.393 |
|
2009 |
Shin S, Juric D. A hybrid interface method for three-dimensional multiphase flows based on front tracking and level set techniques International Journal For Numerical Methods in Fluids. 60: 753-778. DOI: 10.1002/Fld.1912 |
0.388 |
|
2008 |
Abdel-Khalik SI, Crosatti L, Sadowski DL, Shin S, Weathers JB, Yoda M. Thermal-hydraulic studies in support of the ARIES-CS T-tube divertor design Fusion Science and Technology. 54: 864-877. DOI: 10.13182/Fst08-A1907 |
0.711 |
|
2008 |
Novak V, Sadowski DL, Schoonover KG, Shin S, Abdel-Khalik SI, Ghiaasiaan SM. Heat transfer in two-component internal mist cooling. Part II. Mechanistic modeling Nuclear Engineering and Design. 238: 2351-2358. DOI: 10.1016/J.Nucengdes.2008.03.009 |
0.65 |
|
2007 |
Shin S, Abdel-Khalik SI. Numerical modeling of evaporating thin liquid film instability on a heated cylindrical rod with parallel and cross vapor flow Nuclear Science and Engineering. 156: 24-39. DOI: 10.13182/Nse07-A2682 |
0.686 |
|
2007 |
Koehler T, Yoda M, Abdel-Khalik SI, Sadowski DL, Shin S. Investigation of thin liquid layer rupture for liquid-protected divertors Fusion Science and Technology. 52: 526-530. DOI: 10.13182/Fst07-A1542 |
0.694 |
|
2007 |
Shin S. Computation of the curvature field in numerical simulation of multiphase flow Journal of Computational Physics. 222: 872-878. DOI: 10.1016/J.Jcp.2006.08.009 |
0.372 |
|
2007 |
Ihli T, Raffray AR, Abdel-Khalik SI, Shin S. Design and performance study of the helium-cooled T-tube divertor concept Fusion Engineering and Design. 82: 249-264. DOI: 10.1016/J.Fusengdes.2006.11.004 |
0.568 |
|
2007 |
Shin S, Juric D. High Order Level Contour Reconstruction Method Journal of Mechanical Science and Technology. 21: 311-326. DOI: 10.1007/Bf02916292 |
0.354 |
|
2006 |
Abdelall FF, Abdel-Khalik SI, Sadowski DL, Shin S, Yoda M. On the Rayleigh-Taylor instability for confined liquid films with injection through the bounding surfaces International Journal of Heat and Mass Transfer. 49: 1529-1546. DOI: 10.1016/J.Ijheatmasstransfer.2005.07.055 |
0.643 |
|
2005 |
Shin S, Abdel-Khalik SI, Yoda M. Design Constraints for Liquid-Protected Divertors Fusion Science and Technology. 47: 708-712. DOI: 10.13182/Fst05-A768 |
0.665 |
|
2005 |
Novak V, Sadowski D, Shin S, Schoonover K, Abdel-Khalik SI. Experimental and numerical investigation of mist cooling for the electra hibachi Fusion Science and Technology. 47: 610-615. DOI: 10.13182/Fst05-A753 |
0.653 |
|
2005 |
Shin S, Abdel-Khalik SI, Daru V, Juric D. Accurate representation of surface tension using the level contour reconstruction method Journal of Computational Physics. 203: 493-516. DOI: 10.1016/J.Jcp.2004.09.003 |
0.603 |
|
2005 |
Shin S, Abdel-Khalik SI, Juric D. Direct three-dimensional numerical simulation of nucleate boiling using the level contour reconstruction method International Journal of Multiphase Flow. 31: 1231-1242. DOI: 10.1016/J.Ijmultiphaseflow.2005.06.005 |
0.627 |
|
2003 |
Shin S, Abdel-Khalik SI, Juric D, Yoda M. Effects of surface evaporation and condensation on the dynamics of thin liquid films for the porous wetted wall protection scheme in IFE reactors Fusion Science and Technology. 44: 117-126. DOI: 10.13182/Fst03-A320 |
0.679 |
|
2003 |
Shin S, Abdelall F, Juric D, Abdel-Khalik SI, Yoda M, Sadowski D. Fluid dynamic aspects of the porous wetted wall protection scheme for inertial fusion energy reactors Fusion Science and Technology. 43: 366-377. DOI: 10.13182/Fst03-A280 |
0.693 |
|
2003 |
Shin S, Juric D, Abdel-Khalik SI. Hydrodynamic stability of the porous wetted wall protection schemes in IFE reactors Fusion Engineering and Design. 65: 611-627. DOI: 10.1016/S0920-3796(03)00050-4 |
0.689 |
|
2002 |
Shin S, Juric D. Modeling three-dimensional multiphase flow using a level contour reconstruction method for front tracking without connectivity Journal of Computational Physics. 180: 427-470. DOI: 10.1006/Jcph.2002.7086 |
0.432 |
|
Show low-probability matches. |