Year |
Citation |
Score |
2020 |
Loureiro MV, Attaei M, Rocha S, Vale M, Bordado JC, Simões R, Pinho I, Marques AC. The role played by different active hydrogen sources in the microencapsulation of a commercial oligomeric diisocyanate Journal of Materials Science. 55: 4607-4623. DOI: 10.1007/S10853-019-04301-1 |
0.301 |
|
2018 |
Barbosa CN, Simoes R, Franzen M, Baranowski T, Viana JC. Comprehensive study on the relationships between the processing, the microstructure, and mechanical properties of injection molded polypropylenes Polymer Engineering and Science. 58. DOI: 10.1002/Pen.24650 |
0.364 |
|
2017 |
Mirkhalaf SM, Pires FMA, Simoes R. Modelling of the post yield response of amorphous polymers under different stress states International Journal of Plasticity. 88: 159-187. DOI: 10.1016/J.Ijplas.2016.10.008 |
0.352 |
|
2017 |
Brostow W, Khoja S, Simoes R. Sliding wear behavior of polymers studied with mesoscopic molecular dynamics Journal of Materials Science. 52: 1203-1213. DOI: 10.1007/S10853-016-0418-2 |
0.568 |
|
2016 |
Silva PE, Trigueiros JL, Trindade AC, Simoes R, Dias RG, Godinho MH, de Abreu FV. Perversions with a twist. Scientific Reports. 6: 23413. PMID 27025549 DOI: 10.1038/Srep23413 |
0.302 |
|
2016 |
Mirkhalaf SM, Pires FMA, Simoes R. Determination of the size of the Representative Volume Element (RVE) for the simulation of heterogeneous polymers at finite strains Finite Elements in Analysis and Design. 119: 30-44. DOI: 10.1016/J.Finel.2016.05.004 |
0.334 |
|
2015 |
Marques M, Terroso M, Freitas R, Marques AT, Gabriel J, Simoes R. A procedure for a mechanical evaluation of an undefined osteo-protective material. Accident; Analysis and Prevention. 75: 285-91. PMID 25541683 DOI: 10.1016/J.Aap.2014.12.009 |
0.359 |
|
2015 |
Horta J, Brostow W, Simoes R, Castaño VM. 3D molecular dynamics/finite element simulation of carbon nanotubes-reinforced polymer composites Journal of Computational and Theoretical Nanoscience. 12: 3363-3369. DOI: 10.1166/Jctn.2015.4126 |
0.553 |
|
2015 |
Barbosa CN, Carvalho F, Viana JC, Franzen M, Simoes R. Impact performance prediction of injection-molded talc-filled polypropylene through thermomechanical environment assessment The International Journal of Advanced Manufacturing Technology. 77: 873-883. DOI: 10.1007/S00170-014-6495-Y |
0.364 |
|
2014 |
Araújo MC, Martins JP, Mirkhalaf SM, Lanceros-Mendez S, Pires FMA, Simoes R. Predicting the mechanical behavior of amorphous polymeric materials under strain through multi-scale simulation Applied Surface Science. 306: 37-46. DOI: 10.1016/J.Apsusc.2014.03.072 |
0.377 |
|
2014 |
Ferreira V, Santos LP, Franzen M, Ghouati OO, Simoes R. Improving FEM crash simulation accuracy through local thickness estimation based on CAD data Advances in Engineering Software. 71: 52-62. DOI: 10.1016/J.Advengsoft.2014.02.003 |
0.318 |
|
2013 |
Rocha JR, Yang KZ, Hilbig T, Brostow W, Simoes R. Polymer indentation with mesoscopic molecular dynamics Journal of Materials Research. 28: 3043-3052. DOI: 10.1557/Jmr.2013.307 |
0.511 |
|
2013 |
Simões CL, Simoes R, Carvalho J, Pontes AJ, Bernardo CA. The quest for a sustainable product: An environmental study of tyre recyclates Materials & Design. 52: 196-206. DOI: 10.1016/J.Matdes.2013.05.051 |
0.326 |
|
2013 |
Hilbig T, Brostow W, Simoes R. Simulating scratch behavior of polymers with mesoscopic molecular dynamics Materials Chemistry and Physics. 139: 118-124. DOI: 10.1016/J.Matchemphys.2012.12.072 |
0.556 |
|
2013 |
Simões CL, Pinto LMC, Simoes R, Bernardo CA. Integrating environmental and economic life cycle analysis in product development: a material selection case study International Journal of Life Cycle Assessment. 18: 1734-1746. DOI: 10.1007/S11367-013-0561-9 |
0.315 |
|
2013 |
Barbosa CN, Simoes R, Franzen M, Viana JC. Thermomechanical environment characterisation in injection moulding and its relation to the mechanical properties of talc-filled polypropylene Journal of Materials Science. 48: 2597-2607. DOI: 10.1007/S10853-012-7052-4 |
0.328 |
|
2013 |
Costa PFR, Silva J, Sencadas VJGS, Simões R, Viana JC, Lanceros-Méndez S. Mechanical, electrical and electro-mechanical properties of thermoplastic elastomer styrene–butadiene–styrene/multiwall carbon nanotubes composites Journal of Materials Science. 48: 1172-1179. DOI: 10.1007/S10853-012-6855-7 |
0.337 |
|
2013 |
Brostow W, Deshpande S, Hilbig T, Simoes R. Molecular dynamics computer simulation of scratch resistance testing of polymers: visualization Polymer Bulletin. 70: 1457-1464. DOI: 10.1007/S00289-013-0949-5 |
0.523 |
|
2012 |
Correia A, Valashani SM, Pires F, Simões R. Modelling the mechanical behavior of polymer-based nanocomposites Materials Science Forum. 543-548. DOI: 10.4028/Www.Scientific.Net/Msf.730-732.543 |
0.402 |
|
2012 |
Simões R, Viana JC, Dias GR, Cunha AM. Mechanical Behavior of the Lamellar Structure in Semi-Crystalline Polymers Materials Science Forum. 1006-1011. DOI: 10.4028/Www.Scientific.Net/Msf.730-732.1006 |
0.431 |
|
2012 |
Silva J, Cardoso P, Paleo AJ, Hattum FWJv, Simões R, Lanceros-Méndez S. On the origin of the electrical response of vapor grown carbon nanofiber + epoxy composites E-Polymers. 12: 892-898. DOI: 10.1515/Epoly.2012.12.1.892 |
0.339 |
|
2012 |
Cardoso P, Silva J, Agostinho Moreira J, Klosterman D, Van Hattum FWJ, Simoes R, Lanceros-Mendez S. Temperature dependence of the electrical conductivity of vapor grown carbon nanofiber/epoxy composites with different filler dispersion levels Physics Letters, Section a: General, Atomic and Solid State Physics. 376: 3290-3294. DOI: 10.1016/J.Physleta.2012.09.045 |
0.308 |
|
2011 |
Cardoso P, Silva J, Klosterman D, Covas JA, van Hattum FW, Simoes R, Lanceros-Mendez S. The influence of the dispersion method on the electrical properties of vapor-grown carbon nanofiber/epoxy composites. Nanoscale Research Letters. 6: 370. PMID 21711873 DOI: 10.1186/1556-276X-6-370 |
0.307 |
|
2011 |
Silva J, Ribeiro S, Lanceros-Méndez S, Simões R. The influence of matrix mediated hopping conductivity, filler concentration, aspect ratio and orientation on the electrical response of carbon nanotube/polymer nanocomposites Composites Science and Technology. 71: 643-646. DOI: 10.1016/J.Compscitech.2011.01.005 |
0.345 |
|
2010 |
Simoes R, Silva J, Vaia R. A complex network based simulation approach to predict the electrical properties of nanocomposites. Journal of Nanoscience and Nanotechnology. 10: 2451-2457. PMID 20355447 DOI: 10.1166/Jnn.2010.1373 |
0.346 |
|
2010 |
Simoes R, Silva J, Cadilhe A, Vaia R. Applications of the graph theory to the prediction of electrical and dielectric properties of nano-filled polymers Composite Interfaces. 17: 407-422. DOI: 10.1163/092764410X513431 |
0.343 |
|
2010 |
Silva PES, De Abreu FV, Simões R, Dias RG. A first approach to filament dynamics European Journal of Physics. 31: 1473-1483. DOI: 10.1088/0143-0807/31/6/013 |
0.323 |
|
2010 |
Simoes R, Silva J, Lanceros-Mendez S, Vaia R. Influence of fiber aspect ratio and orientation on the dielectric properties of polymer-based nanocomposites Journal of Materials Science. 45: 268-270. DOI: 10.1007/S10853-009-3937-2 |
0.316 |
|
2010 |
Cardoso P, Silva J, Paleo AJ, Hattum FWJv, Simões R, Lanceros-Méndez S. The dominant role of tunneling in the conductivity of carbon nanofiber-epoxy composites Physica Status Solidi (a). 207: 407-410. DOI: 10.1002/Pssa.200925334 |
0.308 |
|
2009 |
Simoes R, Silva J, Vaia R, Sencadas V, Costa P, Gomes J, Lanceros-Méndez S. Low percolation transitions in carbon nanotube networks dispersed in a polymer matrix: dielectric properties, simulations and experiments. Nanotechnology. 20: 35703. PMID 19417305 DOI: 10.1088/0957-4484/20/3/035703 |
0.363 |
|
2009 |
Viana JC, Simões R, Mano JF, Oliveira MJ, Denchev ZZ, Brostow W, Cunha AM. Thermomechanical processing environment and morphology development of a thermotropic polymer liquid crystal Journal of Applied Polymer Science. 115: 2991-3004. DOI: 10.1002/App.30087 |
0.524 |
|
2006 |
Simões R, Viana JC, Dias GR, Cunha AM. Influence of the interaction potential parameters on the mechanical response of simulated semi-crystalline polymeric materials Materials Science Forum. 810-814. DOI: 10.4028/Www.Scientific.Net/Msf.514-516.810 |
0.357 |
|
2006 |
Simões R, Cunha AM, Brostow W. Computer simulations of true stress development and viscoelastic behavior in amorphous polymeric materials Computational Materials Science. 36: 319-328. DOI: 10.1016/J.Commatsci.2005.04.007 |
0.519 |
|
2004 |
Brostow W, Hinze JA, Simões R. Tribological behavior of polymers simulated by molecular dynamics Journal of Materials Research. 19: 851-856. DOI: 10.1557/Jmr.2004.19.3.851 |
0.552 |
|
2004 |
Simões R, Cunha AM, Brostow W. Molecular deformation mechanisms and mechanical properties of polymers simulated by molecular dynamics E-Polymers. DOI: 10.1515/Epoly.2004.4.1.761 |
0.575 |
|
2004 |
Simões R, Cunha AM, Brostow W. Morphological features and mechanical behavior of one- and two-phase polymeric materials simulated by molecular dynamics Polymer. 45: 7767-7777. DOI: 10.1016/J.Polymer.2004.08.063 |
0.565 |
|
2003 |
Brostow W, Cunha AM, Simões R. Generation of polymeric structures on a computer Materials Research Innovations. 7: 19-26. DOI: 10.1007/S10019-002-0218-Y |
0.557 |
|
2002 |
Brostow W, Cunha AM, Quintanilla J, Simões R. Crack formation and propagation in molecular dynamics simulations of polymer liquid crystals Macromolecular Theory and Simulations. 11: 308-314. DOI: 10.1002/1521-3919(20020301)11:3<308::Aid-Mats308>3.0.Co;2-Z |
0.502 |
|
2001 |
Brostow W, Donahue M, Karashin CE, Simoes R. Graphical modeling and computer animation of tensile deformation in polymer liquid crystals (PLCs) Materials Research Innovations. 4: 75-81. DOI: 10.1007/Pl00010784 |
0.355 |
|
Show low-probability matches. |