Year |
Citation |
Score |
2018 |
Anza I, Makhlouf MM. Synthesis of Aluminum-Titanium Carbide Micro and Nanocomposites by the Rotating Impeller In-Situ Gas–Liquid Reaction Method Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science. 49: 466-480. DOI: 10.1007/S11663-017-1148-9 |
0.408 |
|
2017 |
Koutsoukis T, Makhlouf MM. Rendering wrought aluminium alloys castable by means of minimum composition adjustments International Journal of Cast Metals Research. 30: 231-243. DOI: 10.1080/13640461.2017.1287645 |
0.483 |
|
2017 |
Fan Y, Makhlouf MM. Stabilizing the strengthening precipitates in aluminum-manganese alloys by the addition of tungsten Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 691: 1-7. DOI: 10.1016/J.Msea.2017.03.025 |
0.428 |
|
2017 |
Fan Y, Makhlouf MM. Precipitation strengthening in aluminum-zirconium-vanadium alloys Journal of Alloys and Compounds. 725: 171-180. DOI: 10.1016/J.Jallcom.2017.07.144 |
0.403 |
|
2016 |
Fan Y, Makhlouf MM. The effect of introducing the Al-Ni eutectic composition into Al-Zr-V alloys on microstructure and tensile properties Materials Science and Engineering A. 654: 228-235. DOI: 10.1016/J.Msea.2015.12.044 |
0.492 |
|
2016 |
Koutsoukis T, Makhlouf MM. Alternatives to the al-si eutectic system in aluminum casting alloys International Journal of Metalcasting. 10: 329-337. DOI: 10.1007/S40962-016-0042-6 |
0.49 |
|
2016 |
Borgonovo C, Makhlouf MM. Synthesis of Aluminum-Aluminum Nitride Nanocomposites by Gas-Liquid Reactions I. Thermodynamic and Kinetic Considerations Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 47: 5125-5135. DOI: 10.1007/S11661-016-3665-6 |
0.414 |
|
2016 |
Borgonovo C, Makhlouf MM. Synthesis of Aluminum–Aluminum Nitride Nanocomposites by a Gas–Liquid Reaction II. Microstructure and Mechanical Properties Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 1-10. DOI: 10.1007/S11661-016-3328-7 |
0.432 |
|
2015 |
Spence TW, Makhlouf MM. The effect of machining-induced residual stresses on the creep characteristics of aluminum alloys Materials Science and Engineering A. 630: 125-130. DOI: 10.1016/J.Msea.2015.02.020 |
0.399 |
|
2015 |
Fan Y, Huang K, Makhlouf MM. Precipitation Strengthening in Al-Ni-Mn Alloys Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 46: 5830-5841. DOI: 10.1007/S11661-015-3119-6 |
0.494 |
|
2015 |
Fan Y, Makhlouf MM. The Al-Al3Ni Eutectic Reaction: Crystallography and Mechanism of Formation Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 46: 3808-3812. DOI: 10.1007/S11661-015-3051-9 |
0.32 |
|
2015 |
Koutsoukis T, Makhlouf MM. An alternative eutectic system for casting aluminum alloys II. Modification of the eutectic morphology Tms Light Metals. 2015: 283-287. DOI: 10.1007/978-3-319-48248-4_48 |
0.472 |
|
2015 |
Koutsoukis T, Makhlouf MM. An alternative eutectic system for casting aluminum alloys I. Casting ability and tensile properties Tms Light Metals. 2015: 277-281. |
0.396 |
|
2013 |
Fan Y, Makhlouf MM. Castable aluminium alloys for high temperature applications Materials Science Forum. 765: 8-12. DOI: 10.4028/Www.Scientific.Net/Msf.765.8 |
0.463 |
|
2013 |
Spence T, Makhlouf M. Modelling creep induced by machining residual stresses in aluminium alloys Materials Science Forum. 765: 585-589. DOI: 10.4028/Www.Scientific.Net/Msf.765.585 |
0.407 |
|
2013 |
Wu CK, Makhlouf MM. Mathematical modeling and prediction of the heat-treated mechanical properties of aluminum alloy castings Materials Science and Technology Conference and Exhibition 2013, Ms and T 2013. 1: 126-133. |
0.307 |
|
2012 |
Saleem M, Makhlouf M. Helium-Assisted Sand Casting International Journal of Metalcasting. 6: 43-59. DOI: 10.1007/Bf03355538 |
0.351 |
|
2012 |
Wu C, Makhlouf MM. A Mathematical Model and Computer Simulations for Predicting the Response of Aluminum Casting Alloys to Heat Treatment Light Metals 2012. 977-982. DOI: 10.1002/9781118359259.ch170 |
0.328 |
|
2011 |
Warke VS, Sisson RD, Makhlouf MM. The effect of porosity on the austenite to ferrite transformation in powder metallurgy steels Materials Science and Engineering A. 528: 3533-3538. DOI: 10.1016/J.Msea.2011.01.092 |
0.364 |
|
2011 |
Borgonovo C, Apelian D, Makhlouf MM. Aluminum nanocomposites for elevated temperature applications Jom. 63: 57-64. DOI: 10.1007/S11837-011-0030-5 |
0.449 |
|
2010 |
Mandal A, Makhlouf MM. Chemical modification of morphology of Mg2Si phase in hypereutectic aluminium-silicon-magnesium alloys International Journal of Cast Metals Research. 23: 303-309. DOI: 10.1179/136404610X12693537270019 |
0.507 |
|
2010 |
Makhlouf M. On the Mechanism of Modification of the Aluminum-Silicon Eutectic by Strontium: The Role of Nucleation International Journal of Metalcasting. 4: 47-50. DOI: 10.1007/Bf03355485 |
0.441 |
|
2009 |
Wang L, Apelian D, Makhlouf MM. Optimization of aluminium die casting alloys for enhanced properties Materials Science Forum. 618: 601-605. DOI: 10.4028/Www.Scientific.Net/Msf.618-619.601 |
0.473 |
|
2009 |
Warke VS, Sisson RD, Makhlouf MM. The effect of porosity on the austenite to bainite transformation in powder metallurgy steels Journal of Materials Research. 24: 3213-3219. DOI: 10.1557/Jmr.2009.0379 |
0.342 |
|
2009 |
Warke VS, Sisson RD, Makhlouf MM. FEA model for predicting the response of powder metallurgy steel components to heat treatment Materials Science and Engineering A. 518: 7-15. DOI: 10.1016/J.Msea.2009.04.003 |
0.351 |
|
2009 |
Warke VS, Sisson RD, Makhlouf MM. A model for converting dilatometric strain measurements to the fraction of phase formed during the transformation of austenite to martensite in powder metallurgy steels Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 40: 569-572. DOI: 10.1007/S11661-008-9727-7 |
0.33 |
|
2009 |
Tonmukayakul N, Makhlouf M, Shankar S. Characterization of the Flow Behavior of Near Eutectic Composition Aluminum-Silicon Alloys International Journal of Metalcasting. 3: 7-16. DOI: 10.1007/Bf03355444 |
0.468 |
|
2009 |
Mandal A, Makhlouf MM. Development of a novel hypereutectic aluminum-silicon-magnesium alloy for die casting Transactions of the Indian Institute of Metals. 62: 357-360. |
0.386 |
|
2009 |
Mandal A, Makhlouf MM. Microstructure and mechanical properties of cast hypereutectic Al-Si alloys with high magnesium content Tms Annual Meeting. 57-62. |
0.385 |
|
2006 |
Apelian D, Makhlouf MM, Saha D. CDS method for casting aluminum-based wrought alloy compositions: theoretical framework Materials Science Forum. 519: 1771-1776. DOI: 10.4028/Www.Scientific.Net/Msf.519-521.1771 |
0.472 |
|
2006 |
Shankar S, Makhlouf MM. Authors’ reply to reply of discussion on “nucleation mechanism of eutectic phases in aluminum-silicon hypoeutectic alloys” Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 37: 1353-1356. DOI: 10.1007/S11661-006-1088-5 |
0.307 |
|
2006 |
Shankar S, Makhlouf MM. Authors' reply to reply of discussion on "Nucleation mechanism of eutectic phases in aluminum-silicon hypoeutectic alloys" Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 37: 1353-1356. |
0.356 |
|
2005 |
Warke VS, Tryggvason G, Makhlouf MM. Mathematical modeling and computer simulation of molten metal cleansing by the rotating impeller degasser: Part I. Fluid flow Journal of Materials Processing Technology. 168: 112-118. DOI: 10.1016/J.Jmatprotec.2004.10.017 |
0.343 |
|
2005 |
Warke VS, Shankar S, Makhlouf MM. Mathematical modeling and computer simulation of molten aluminum cleansing by the rotating impeller degasser: Part II. Removal of hydrogen gas and solid particles Journal of Materials Processing Technology. 168: 119-126. DOI: 10.1016/J.Jmatprotec.2004.10.016 |
0.356 |
|
2005 |
Shankar S, Riddle Y, Makhlouf MM. Chemical modification of the morphology of the eutectic phases in hypoeutectic aluminum-silicon alloys Tms Annual Meeting. 145-154. |
0.359 |
|
2005 |
Shankar S, Riddle Y, Makhlouf MM. Mechanism of eutectic solidification of aluminum-silicon alloys Tms Annual Meeting. 135-144. |
0.391 |
|
2005 |
Saha D, Shankar S, Apelian D, Makhlouf MM. Controlled diffusion solidification - Manufacturing net shaped al-based wrought alloy parts Tms Annual Meeting. 415-422. |
0.323 |
|
2005 |
Dahle AK, Hillert M, Shankar S, Riddle YW, Makhlouf MM. Discussion of "nucleation mechanism of eutectic phases in aluminum-silicon hypoeutectic alloys" Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 36: 1612-1617. |
0.362 |
|
2004 |
Shankar S, Riddle YW, Makhlouf MM. Nucleation mechanism of the eutectic phases in aluminum-silicon hypoeutectic alloys Acta Materialia. 52: 4447-4460. DOI: 10.1016/J.Actamat.2004.05.045 |
0.441 |
|
2004 |
Saha D, Shankar S, Apelian D, Makhlouf MM. Casting of aluminum-based wrought alloys using controlled diffusion solidification Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 35: 2174-2180. DOI: 10.1007/S11661-004-0167-8 |
0.421 |
|
2004 |
Shankar S, Riddle YW, Makhlouf MM. Eutectic Solidification of Aluminum-Silicon Alloys Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 35: 3038-3043. DOI: 10.1007/S11661-004-0048-1 |
0.429 |
|
2004 |
Riddle YW, Barber LP, Makhlouf MM. Characterization of mg alloy solidification and as-cast microstructures Magnesium Technology 2004. 203-208. |
0.363 |
|
2004 |
Pan QY, Apelian D, Makhlouf MM. AlB2 grain refined Al-Si alloys: Rheocasting/thixocasting applications Proceedings of the 8th International Conference On Semi-Solid Processing of Alloys and Composites, S2p 2004. 511-519. |
0.353 |
|
2004 |
Shankar S, Riddle YW, Makhlouf MM. Eutectic solidification of aluminum-silicon alloys Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 35: 3038-3043. |
0.394 |
|
2004 |
Shankar S, Saha D, Makhlouf MM, Apelian D. Casting of wrought aluminum-based alloys Die Casting Engineer. 48: 52-54+56. |
0.396 |
|
2004 |
Makhlouf MM, Apelian D, Wang L. iSelect-Al - An electronic tool for the selection and design of aluminum die casting alloys Die Casting Engineer. 48: 26-28+30. |
0.316 |
|
2003 |
Riddle YW, Shankar S, Makhlouf M. Application of FIB to Metal Alloy TEM Sample Preparation Microscopy and Microanalysis. 9: 880-881. DOI: 10.1017/S1431927603444401 |
0.39 |
|
2003 |
Shankar S, Apelian D, Makhlouf MM. Evolution of microstructure during solidification of Al-Si cast alloys Microscopy and Microanalysis. 9: 556-557. DOI: 10.1017/S1431927603442785 |
0.51 |
|
2003 |
Shankar S, Riddle YW, Makhlouf MM. Focused ion beam milling: A practical method for preparing cast Al-Si alloy samples for transmission electron microscopy Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 34: 705-707. DOI: 10.1007/S11661-003-0105-1 |
0.373 |
|
2003 |
Shankar S, Riddle YW, Makhlouf MM. Focused ion beam milling: A practical method for preparing cast Al-Si alloy samples for transmission electron microscopy Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 34: 705-707. |
0.318 |
|
2002 |
Maniruzzaman MD, Makhlouf MM. Mathematical Modeling and Computer Simulation of the Rotating Impeller Particle Flotation Process: Part II. Particle Agglomeration and Flotation Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science. 33: 305-314. DOI: 10.1007/S11663-002-0014-5 |
0.305 |
|
2001 |
Olson JM, Makhlouf MM. Grain growth at the free surface of WC-Co materials Journal of Materials Science. 36: 3027-3033. DOI: 10.1023/A:1017975025221 |
0.321 |
|
2001 |
Olson JM, Makhlouf MM. Characterization of the kinetic and mechanistic differences between free-surface and bulk grain growth in WC-Co materials Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 32: 1261-1270. DOI: 10.1007/S11661-001-0216-5 |
0.316 |
|
2000 |
Pech-Canul MI, Katz RN, Makhlouf MM, Pickard S. Role of silicon in wetting and pressureless infiltration of SiCp preforms by aluminum alloys Journal of Materials Science. 35: 2167-2173. DOI: 10.1023/A:1004758305801 |
0.465 |
|
2000 |
Pech-Canul MI, Katz RN, Makhlouf MM. Optimum conditions for pressureless infiltration of SiCp preforms by aluminum alloys Journal of Materials Processing Technology. 108: 68-77. DOI: 10.1016/S0924-0136(00)00664-6 |
0.357 |
|
2000 |
Pech-Canul MI, Katz RN, Makhlouf MM. Optimum parameters for wetting silicon carbide by aluminum alloys Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 31: 565-573. DOI: 10.1007/S11661-000-0291-Z |
0.448 |
|
2000 |
Pech-Canul MI, Katz RN, Makhlouf MM. Optimized wetting of silicon carbide by aluminum alloys Proceedings of the Tms Fall Meeting. 115-128. |
0.323 |
|
Show low-probability matches. |