| Year |
Citation |
Score |
| 2020 |
Joshi P, Tillman M, Kumar N, Murty K, Cinbiz N. Biaxial Creep Behavior of Nb-Modified Zircaloys Nuclear Technology. 206: 706-716. DOI: 10.1080/00295450.2019.1674581 |
0.419 |
|
| 2020 |
Tjayadi L, Kumar N, Murty KL. Accelerated crack growth experiments of SS304H for dry storage canister in substitute ocean water – Effect of temperature Materials Today Communications. 23: 100929. DOI: 10.1016/J.Mtcomm.2020.100929 |
0.326 |
|
| 2020 |
Joshi P, Kombaiah B, Cinbiz MN, Murty KL. Characterization of stress-rupture behavior of nuclear-grade C26M2 FeCrAl alloy for accident-tolerant fuel cladding via burst testing Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 791: 139753. DOI: 10.1016/J.Msea.2020.139753 |
0.465 |
|
| 2020 |
Liao Z, Luan B, Zhang X, Liu R, Murty KL, Liu Q. Effect of varying α phase fraction on the mechanical properties and deformation mechanisms in a metastable β-ZrTiAlV alloy Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 772: 138784. DOI: 10.1016/J.Msea.2019.138784 |
0.351 |
|
| 2020 |
Alsmadi ZY, Alomari A, Kumar N, Murty KL. Effect of hold time on high temperature creep-fatigue behavior of Fe–25Ni–20Cr (wt.%) austenitic stainless steel (Alloy 709) Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 771: 138591. DOI: 10.1016/J.Msea.2019.138591 |
0.428 |
|
| 2020 |
Li S, Luan B, Chu L, Zhang X, Yuan G, Liu R, Murty KL, Liu Q. Twinning behaviors and grain refinement mechanisms during friction stir processing of Zr alloy Materials Characterization. 163: 110277. DOI: 10.1016/J.Matchar.2020.110277 |
0.494 |
|
| 2020 |
Xiang K, Chai L, Wang Y, Wang H, Guo N, Ma Y, Murty KL. Microstructural characteristics and hardness of CoNiTi medium-entropy alloy coating on pure Ti substrate prepared by pulsed laser cladding Journal of Alloys and Compounds. 849: 156704. DOI: 10.1016/J.Jallcom.2020.156704 |
0.371 |
|
| 2020 |
Liao Z, Luan B, Zhang X, Liu R, Murty KL, Liu Q. A multi-deformation mechanisms assisted metastable β-ZrTiAlV alloy exhibits high yield strength and high work hardening rate Journal of Alloys and Compounds. 816: 152642. DOI: 10.1016/J.Jallcom.2019.152642 |
0.477 |
|
| 2020 |
Dai J, Xia J, Chai L, Murty KL, Guo N, Daymond MR. Correlation of microstructural, textural characteristics and hardness of Ti–6Al–4V sheet β-cooled at different rates Journal of Materials Science. 55: 8346-8362. DOI: 10.1007/S10853-020-04603-9 |
0.323 |
|
| 2019 |
Chai L, Xiang K, Xia J, Fallah V, Murty KL, Yao Z, Gan B. Effects of pulsed laser surface treatments on microstructural characteristics and hardness of CrCoNi medium-entropy alloy Philosophical Magazine. 99: 3015-3031. DOI: 10.1080/14786435.2019.1649499 |
0.328 |
|
| 2019 |
Wang J, Luan B, Xin R, Xing Q, Murty K, Cayron C, Liu Q. Experimental and theoretical investigation of crystallography and variant selection during massive transformation in Zr alloy Philosophical Magazine. 99: 1163-1183. DOI: 10.1080/14786435.2019.1574408 |
0.397 |
|
| 2019 |
Kombaiah B, Sarkar A, Murty KL. Effect of hydriding on the creep behavior of HANA-4 Zirconium alloy Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 767: 138435. DOI: 10.1016/J.Msea.2019.138435 |
0.459 |
|
| 2019 |
Alomari AS, Kumar N, Murty KL. Serrated yielding in an advanced stainless steel Fe-25Ni-20Cr (wt%) Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 751: 292-302. DOI: 10.1016/J.Msea.2019.02.023 |
0.451 |
|
| 2019 |
Liao Z, Luan B, Zhang X, Xing Q, Liu R, Murty KL, Liu Q. Study of deformation mechanisms in a metastable β Zr alloy during compression Materials Letters. 237: 172-175. DOI: 10.1016/J.Matlet.2018.11.043 |
0.442 |
|
| 2019 |
Liao Z, Luan B, Zhang X, Liu R, Murty KL, Liu Q. The effects of increasing deformation strain on the microstructural evolution of a metastable β-Zr alloy Journal of Alloys and Compounds. 800: 208-218. DOI: 10.1016/J.Jallcom.2019.05.334 |
0.392 |
|
| 2019 |
Alomari AS, Kumar N, Murty KL. Creep Behavior and Microstructural Evolution of a Fe-20Cr-25Ni (Mass Percent) Austenitic Stainless Steel (Alloy 709) at Elevated Temperatures Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 50: 641-654. DOI: 10.1007/S11661-018-5044-Y |
0.496 |
|
| 2019 |
Dai J, Zeng L, Li Z, Chai L, Zheng Z, Wu H, Murty KL, Guo N. Misorientation characteristics and textural changes induced by dense twins in high-purity Ti sheet after small strain rolling Science China-Technological Sciences. 62: 1968-1975. DOI: 10.1007/S11431-019-9555-9 |
0.427 |
|
| 2018 |
Sarkar A, Murty KL. Anisotropic grain growth kinetics in nanocrystalline nickel Philosophical Magazine Letters. 98: 494-501. DOI: 10.1080/09500839.2019.1583391 |
0.434 |
|
| 2018 |
Alomari AS, Kumar N, Murty KL. Enhanced ductility in dynamic strain aging regime in a Fe-25Ni-20Cr austenitic stainless steel Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 729: 157-160. DOI: 10.1016/J.Msea.2018.05.060 |
0.4 |
|
| 2018 |
Zeng Q, Luan B, Wang Y, Zhang X, Liu R, Murty KL, Liu Q. Effect of initial orientation on dynamic recrystallization of a zirconium alloy during hot deformation Materials Characterization. 145: 444-453. DOI: 10.1016/J.Matchar.2018.09.008 |
0.455 |
|
| 2018 |
Kumar N, Alomari A, Murty KL. Understanding thermally activated plastic deformation behavior of Zircaloy-4 Journal of Nuclear Materials. 504: 41-49. DOI: 10.1016/J.Jnucmat.2018.03.031 |
0.451 |
|
| 2018 |
Chai L, Chen K, Zhi Y, Murty KL, Chen L, Yang Z. Nanotwins induced by pulsed laser and their hardening effect in a Zr alloy Journal of Alloys and Compounds. 748: 163-170. DOI: 10.1016/J.Jallcom.2018.03.126 |
0.38 |
|
| 2017 |
Qiu R, Song Z, Luan B, Yue Q, Wang L, Yuan G, Murty KL, Liu Q. Evolution of microstructure and second-phase particles in Zr–Sn–Nb–Fe alloy tube during Pilger processing Journal of Nuclear Science and Technology. 54: 1321-1329. DOI: 10.1080/00223131.2017.1365023 |
0.409 |
|
| 2017 |
Kumar N, Fusco M, Komarasamy M, Mishra R, Bourham M, Murty K. Understanding effect of 3.5 wt.% NaCl on the corrosion of Al0.1CoCrFeNi high-entropy alloy Journal of Nuclear Materials. 495: 154-163. DOI: 10.1016/J.Jnucmat.2017.08.015 |
0.426 |
|
| 2017 |
Chai L, Wang S, Wu H, Guo N, Pan H, Chen L, Murty KL, Song B. α→β Transformation characteristics revealed by pulsed laser-induced non-equilibrium microstructures in duplex-phase Zr alloy Science China Technological Sciences. 60: 1255-1262. DOI: 10.1007/S11431-016-9038-Y |
0.347 |
|
| 2016 |
Mohamed W, Miller B, Porter D, Murty K. The Role of Grain Size on Neutron Irradiation Response of Nanocrystalline Copper. Materials (Basel, Switzerland). 9. PMID 28773270 DOI: 10.3390/Ma9030144 |
0.42 |
|
| 2016 |
Zhang M, Luan BF, Song ZL, Xin RL, Murty KL, Liu Q. 112̅1-101̅2 double twinning in a Zircaloy-4 alloy during rolling at ambient temperature Scripta Materialia. 122: 77-81. DOI: 10.1016/J.Scriptamat.2016.05.003 |
0.416 |
|
| 2016 |
Roodposhti PS, Sarkar A, Murty KL, Brody H, Scattergood R. Grain boundary sliding mechanism during high temperature deformation of AZ31 Magnesium alloy Materials Science and Engineering A. 669: 171-177. DOI: 10.1016/J.Msea.2016.05.076 |
0.499 |
|
| 2016 |
Sarkar A, Eapen J, Raj A, Murty KL, Burchell TD. Modeling irradiation creep of graphite using rate theory Journal of Nuclear Materials. 473: 197-205. DOI: 10.1016/J.Jnucmat.2016.01.036 |
0.353 |
|
| 2016 |
Chai L, Chen B, Wang S, Zhang Z, Murty KL. Microstructural, textural and hardness evolution of commercially pure Zr surface-treated by high current pulsed electron beam Applied Surface Science. 390: 430-434. DOI: 10.1016/J.Apsusc.2016.08.128 |
0.342 |
|
| 2016 |
Shahbeigi Roodposhti P, Sarkar A, Murty KL, Scattergood RO. Effects of Microstructure and Processing Methods on Creep Behavior of AZ91 Magnesium Alloy Journal of Materials Engineering and Performance. 25: 3697-3709. DOI: 10.1007/S11665-016-2222-1 |
0.478 |
|
| 2015 |
Roodposhti PS, Farahbakhsh N, Sarkar A, Murty KL. Microstructural approach to equal channel angular processing of commercially pure titanium—A review Transactions of Nonferrous Metals Society of China. 25: 1353-1366. DOI: 10.1016/S1003-6326(15)63734-7 |
0.396 |
|
| 2015 |
Sarkar A, Maloy SA, Murty KL. Investigation of Portevin-Le Chatelier effect in HT-9 steel Materials Science and Engineering A. 631: 120-125. DOI: 10.1016/J.Msea.2015.02.022 |
0.371 |
|
| 2015 |
Roodposhti PS, Sarkar A, Murty KL. Microstructural development of high temperature deformed AZ31 magnesium alloys Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 626: 195-202. DOI: 10.1016/J.Msea.2014.12.064 |
0.504 |
|
| 2015 |
Chai L, Luan B, Xiao D, Zhang M, Murty KL, Liu Q. Microstructural and textural evolution of commercially pure Zr sheet rolled at room and liquid nitrogen temperatures Materials and Design. 85: 296-308. DOI: 10.1016/J.Matdes.2015.06.088 |
0.475 |
|
| 2015 |
Chai L, Chen B, Zhou Z, Murty KL, Ma Y, Huang W. A special twin relationship or a common Burgers misorientation between α plates after β quenching in Zr alloy? Materials Characterization. 104: 61-65. DOI: 10.1016/J.Matchar.2015.04.008 |
0.366 |
|
| 2015 |
Sarkar A, Murty KL. Microstructure-mechanical property correlation of cryo rolled Zircaloy-4 Journal of Nuclear Materials. 456: 287-291. DOI: 10.1016/J.Jnucmat.2014.09.071 |
0.455 |
|
| 2015 |
Roodposhti PS, Sarkar A, Murty KL, Scattergood RO. Dislocation Density Evolution During Creep of AZ31 Mg Alloy: A Study by X-ray Diffraction Line Profile Analysis Metallography, Microstructure, and Analysis. 4: 337-343. DOI: 10.1007/S13632-015-0220-6 |
0.402 |
|
| 2015 |
Roodposhti PS, Sarkar A, Murty KL. Fracture Behavior of AZ31 Magnesium Alloy During Low-Stress High-Temperature Deformation Metallography, Microstructure, and Analysis. 4: 91-101. DOI: 10.1007/S13632-015-0189-1 |
0.476 |
|
| 2015 |
Kombaiah B, Murty KL. Coble, Orowan Strengthening, and Dislocation Climb Mechanisms in a Nb-Modified Zircaloy Cladding Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 46: 4646-4660. DOI: 10.1007/S11661-015-3060-8 |
0.382 |
|
| 2015 |
Roodposhti PS, Sarkar A, Murty KL. Creep Deformation Mechanisms and Related Microstucture Development of AZ31 Magnesium Alloy Magnesium Technology. DOI: 10.1002/9781119093428.Ch9 |
0.452 |
|
| 2014 |
Alsabbagh A, Sarkar A, Miller B, Burns J, Squires L, Porter D, Cole JI, Murty KL. Microstructure and mechanical behavior of neutron irradiated ultrafine grained ferritic steel Materials Science and Engineering A. 615: 128-138. DOI: 10.1016/J.Msea.2014.07.070 |
0.761 |
|
| 2014 |
Sarkar A, Alsabbagh AH, Murty KL. Investigation of microstructure and mechanical properties of low dose neutron irradiated HT-9 steel Annals of Nuclear Energy. 65: 91-96. DOI: 10.1016/J.Anucene.2013.11.008 |
0.738 |
|
| 2014 |
Sarkar A, Boopathy K, Eapen J, Murty KL. Creep behavior of hydrogenated zirconium alloys Journal of Materials Engineering and Performance. 23: 3649-3656. DOI: 10.1007/S11665-014-1129-Y |
0.409 |
|
| 2014 |
Varam S, Rajulapati KV, Bhanu Sankara Rao K, Scattergood RO, Murty KL, Koch CC. Loading rate-dependent mechanical properties of bulk two-phase nanocrystalline Al-Pb alloys studied by nanoindentation Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 45: 5249-5258. DOI: 10.1007/S11661-014-2425-8 |
0.432 |
|
| 2013 |
Eapen J, Krishna R, Burchell TD, Murty KL. Early Damage Mechanisms in Nuclear Grade Graphite under Irradiation Materials Research Letters. 2: 43-50. DOI: 10.1080/21663831.2013.841782 |
0.344 |
|
| 2013 |
Chai L, Luan B, Murty KL, Liu Q. Twinning during recrystallization cooling in α-Zr alloy Materials Science and Engineering A. 576: 320-325. DOI: 10.1016/J.Msea.2013.04.010 |
0.489 |
|
| 2013 |
Alsabbagh A, Valiev RZ, Murty KL. Influence of grain size on radiation effects in a low carbon steel Journal of Nuclear Materials. 443: 302-310. DOI: 10.1016/J.Jnucmat.2013.07.049 |
0.745 |
|
| 2013 |
Chai L, Luan B, Zhang M, Murty KL, Liu Q. Experimental observation of 12 α variants inherited from one β grain in a Zr alloy Journal of Nuclear Materials. 440: 377-381. DOI: 10.1016/J.Jnucmat.2013.05.053 |
0.385 |
|
| 2013 |
Chai L, Luan B, Murty KL, Liu Q. Effect of predeformation on microstructural evolution of a Zr alloy during 550-700 °c aging after β quenching Acta Materialia. 61: 3099-3109. DOI: 10.1016/J.Actamat.2013.02.001 |
0.416 |
|
| 2011 |
Sahoo SK, Gaffney VN, Chatterjee A, Murty KL. Annealing Behaviour of Ferritic HT-9 Steel Materials Science Forum. 794-797. DOI: 10.4028/Www.Scientific.Net/Msf.702-703.794 |
0.458 |
|
| 2011 |
Seok CS, Marple B, Song YJ, Gollapudi S, Charit I, Murty KL. High temperature deformation characteristics of Zirlo™ tubing via ring-creep and burst tests Nuclear Engineering and Design. 241: 599-602. DOI: 10.1016/J.Nucengdes.2010.04.017 |
0.431 |
|
| 2011 |
Chatterjee A, Murty KL, Gayathri N, Mukherjee P, Barat P. Temperature Dependence of the Dynamics of Portevin-Le Chatelier Effect in Al-2.5 Pct Mg Alloy Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 42: 1184-1190. DOI: 10.1007/S11661-010-0530-X |
0.394 |
|
| 2010 |
Gobien JM, Murty KL, Scattergood RO, Goodwin F, Koch CC. Creep behavior of ultra-fine grained Zn-4.5Al Materials Science and Engineering A. 527: 7382-7386. DOI: 10.1016/J.Msea.2010.08.020 |
0.464 |
|
| 2010 |
Gollapudi S, Rajulapati KV, Charit I, Koch CC, Scattergood RO, Murty KL. Creep in nanocrystalline materials: Role of stress assisted grain growth Materials Science and Engineering A. 527: 5773-5781. DOI: 10.1016/J.Msea.2010.05.048 |
0.426 |
|
| 2010 |
Gollapudi S, Rajulapati KV, Charit I, Youssef KM, Koch CC, Scattergood RO, Murty KL. Understanding creep in nanocrystalline materials Transactions of the Indian Institute of Metals. 63: 373-378. DOI: 10.1007/S12666-010-0050-9 |
0.409 |
|
| 2010 |
Burchell TD, Murty KL, Eapen J. Irradiation induced creep of graphite Jom. 62: 93-99. DOI: 10.1007/S11837-010-0145-0 |
0.388 |
|
| 2010 |
Chant I, Murty KL. Structural materials issues for the next generation fission reactors Jom. 62: 67-74. DOI: 10.1007/S11837-010-0142-3 |
0.336 |
|
| 2008 |
Scattergood RO, Koch CC, Murty KL, Brenner D. Strengthening mechanisms in nanocrystalline alloys Materials Science and Engineering A. 493: 3-11. DOI: 10.1016/J.Msea.2007.04.132 |
0.429 |
|
| 2008 |
Murty KL, Charit I. Structural materials for Gen-IV nuclear reactors: Challenges and opportunities Journal of Nuclear Materials. 383: 189-195. DOI: 10.1016/J.Jnucmat.2008.08.044 |
0.401 |
|
| 2008 |
Murty KL, Charit I. Static strain aging and dislocation-impurity interactions in irradiated mild steel Journal of Nuclear Materials. 382: 217-222. DOI: 10.1016/J.Jnucmat.2008.08.008 |
0.392 |
|
| 2008 |
Charit I, Murty KL. Creep behavior of niobium-modified zirconium alloys Journal of Nuclear Materials. 374: 354-363. DOI: 10.1016/J.Jnucmat.2007.08.019 |
0.467 |
|
| 2008 |
Gollapudi S, Charit I, Murty KL. Creep mechanisms in Ti-3Al-2.5V alloy tubing deformed under closed-end internal gas pressurization Acta Materialia. 56: 2406-2419. DOI: 10.1016/J.Actamat.2008.01.052 |
0.446 |
|
| 2008 |
Rajulapati KV, Scattergood RO, Murty KL, Horita Z, Langdon TG, Koch CC. Mechanical properties of bulk nanocrystalline aluminum-tungsten alloys Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 39: 2528-2534. DOI: 10.1007/S11661-008-9593-3 |
0.422 |
|
| 2007 |
Srikant G, Marple B, Charit I, Murty KL. Characterization of stress rupture behavior of commercial-purity-Ti via burst testing Materials Science and Engineering A. 463: 203-207. DOI: 10.1016/J.Msea.2006.06.145 |
0.389 |
|
| 2007 |
Charit I, Seok CS, Murty KL. Synergistic effects of interstitial impurities and radiation defects on mechanical characteristics of ferritic steels Journal of Nuclear Materials. 361: 262-273. DOI: 10.1016/J.Jnucmat.2006.12.003 |
0.446 |
|
| 2007 |
Guduru RK, Darling KA, Scattergood RO, Koch CC, Murty KL. Mechanical properties of electrodeposited nanocrystalline copper using tensile and shear punch tests Journal of Materials Science. 42: 5581-5588. DOI: 10.1007/S10853-006-1095-3 |
0.416 |
|
| 2007 |
Guduru RK, Wong PZ, Darling KA, Koch CC, Murty KL, Scattergood RO. Determination of activation volume in noncrystalline Cu using the shear punch test Advanced Engineering Materials. 9: 855-859. DOI: 10.1002/Adem.200700181 |
0.442 |
|
| 2007 |
Guduru RK, Nagasekhar AV, Scattergood RO, Koch CC, Murty KL. Thickness and clearance effects in shear punch testing Advanced Engineering Materials. 9: 157-160. DOI: 10.1002/Adem.200600255 |
0.367 |
|
| 2006 |
Rajulapati KV, Scattergood RO, Murty KL, Duscher G, Koch CC. Effect of Pb on the mechanical properties of nanocrystalline Al Scripta Materialia. 55: 155-158. DOI: 10.1016/J.Scriptamat.2006.03.051 |
0.318 |
|
| 2006 |
Guduru RK, Scattergood RO, Koch CC, Murty KL, Guruswamy S, McCarter MK. Mechanical properties of nanocrystalline Fe-Pb and Fe-Al2O 3 Scripta Materialia. 54: 1879-1883. DOI: 10.1016/J.Scriptamat.2006.02.014 |
0.309 |
|
| 2006 |
Youssef KM, Scattergood RO, Murty KL, Koch CC. Nanocrystalline Al-Mg alloy with ultrahigh strength and good ductility Scripta Materialia. 54: 251-256. DOI: 10.1016/J.Scriptamat.2005.09.028 |
0.434 |
|
| 2006 |
Guduru RK, Darling KA, Scattergood RO, Koch CC, Murty KL, Bakkal M, Shih AJ. Shear punch tests for a bulk metallic glass Intermetallics. 14: 1411-1416. DOI: 10.1016/J.Intermet.2006.01.052 |
0.373 |
|
| 2006 |
Guduru RK, Nagasekhar AV, Scattergood RO, Koch CC, Murty KL. Finite element analysis of a shear punch test Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 37: 1477-1483. DOI: 10.1007/S11661-006-0092-0 |
0.341 |
|
| 2005 |
Trichy GR, Scattergood RO, Koch CC, Murty KL. Ball indentation tests for a Zr-based bulk metallic glass Scripta Materialia. 53: 1461-1465. DOI: 10.1016/J.Scriptamat.2005.08.010 |
0.366 |
|
| 2005 |
Guduru RK, Darling KA, Kishore R, Scattergood RO, Koch CC, Murty KL. Evaluation of mechanical properties using shear-punch testing Materials Science and Engineering A. 395: 307-314. DOI: 10.1016/J.Msea.2004.12.048 |
0.417 |
|
| 2005 |
Mathew MD, Yang H, Movva S, Murty KL. Creep Deformation Characteristics of Tin and Tin-Based Electronic Solder Alloys Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 36: 99-105. DOI: 10.1007/S11661-005-0142-Z |
0.445 |
|
| 2005 |
Koch CC, Youssef KM, Scattergood RO, Murty KL. Breakthroughs in optimization of mechanical properties of nanostructured metals and alloys Advanced Engineering Materials. 7: 787-794. DOI: 10.1002/Adem.200500094 |
0.447 |
|
| 2004 |
Zhou Y, Devarajan B, Murty KL. Short-term rupture studies of Zircaloy-4 and Nb-modified Zircaloy-4 tubing using closed-end internal pressurization Nuclear Engineering and Design. 228: 3-13. DOI: 10.1016/J.Nucengdes.2003.06.013 |
0.457 |
|
| 2000 |
Seok C, Murty KL. A study on the decrease of fracture resistance curve under reversed cyclic loading International Journal of Pressure Vessels and Piping. 77: 303-311. DOI: 10.1016/S0308-0161(00)00018-1 |
0.325 |
|
| 2000 |
Murty KL. The internal pressurization creep of Zr alloys for spent-fuel dry storage feasibility Jom. 52: 34-38. DOI: 10.1007/S11837-000-0185-Y |
0.446 |
|
| 1999 |
Mathew MD, Murty KL. Non-destructive studies on tensile and fracture properties of molybdenum at low temperatures (148 to 423 K) Journal of Materials Science. 34: 1497-1503. DOI: 10.1023/A:1004547709783 |
0.344 |
|
| 1999 |
Mathew MD, Lietzan LM, Murty KL, Shah VN. Low temperature aging embrittlement of CF-8 stainless steel Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 269: 186-196. DOI: 10.1016/S0921-5093(99)00140-9 |
0.405 |
|
| 1999 |
Mathew MD, Murty KL, Rao KBS, Mannan SL. Ball indentation studies on the effect of aging on mechanical behavior of alloy 625 Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 264: 159-166. DOI: 10.1016/S0921-5093(98)01098-3 |
0.439 |
|
| 1999 |
Seok CS, Murty KL. Effect of dynamic strain aging on mechanical and fracture properties of A516Gr70 steel International Journal of Pressure Vessels and Piping. 76: 945-953. DOI: 10.1016/S0308-0161(99)00075-7 |
0.434 |
|
| 1999 |
Murty KL, Miraglia PQ, Mathew MD, Shah VN, Haggag FM. Characterization of gradients in mechanical properties of SA-533B steel welds using ball indentation International Journal of Pressure Vessels and Piping. 76: 361-369. DOI: 10.1016/S0308-0161(99)00006-X |
0.433 |
|
| 1998 |
Malow T, Koch C, Miraglia P, Murty K. Compressive mechanical behavior of nanocrystalline Fe investigated with an automated ball indentation technique Materials Science and Engineering: A. 252: 36-43. DOI: 10.1016/S0921-5093(98)00661-3 |
0.469 |
|
| 1998 |
Murty KL, Mathew MD, Wang Y, Shah VN, Haggag FM. Nondestructive determination of tensile properties and fracture toughness of cold worked A36 steel International Journal of Pressure Vessels and Piping. 75: 831-840. DOI: 10.1016/S0308-0161(98)00093-3 |
0.387 |
|
| 1998 |
Murty KL, Mathew MD, Haggag FM. An investigation of the deformation mechanisms in sn5% sb alloy using tensile, creep and abi tests from ambient to 473k Metals and Materials. 4: 799-802. DOI: 10.1007/Bf03026401 |
0.438 |
|
| 1998 |
Wang Y, Murty KL. Effect of temperature on mechanical anisotropy of zircaloy-4 sheet Metals and Materials. 4: 723-726. DOI: 10.1007/Bf03026387 |
0.323 |
|
| 1997 |
Haggag FM, Wang JA, Sokolov MA, Murty KL. Use of Portable/ in situ Stress-Strain Microprobe System to Measure Stress-Strain Behavior and Damage in Metallic Materials and Structures Astm Special Technical Publications. 85-98. DOI: 10.1520/Stp11894S |
0.48 |
|
| 1996 |
Murty KL, Detemple K, Kanert O, Peters G, Hosson JTMd. In situ nuclear magnetic resonance study of defect dynamics during deformation of materials Journal of Materials Science. 31: 3289-3297. DOI: 10.1007/Bf00354681 |
0.374 |
|
| 1994 |
Murty KL, Tanikella BV, Earthman JC. Effect of grain shape and texture on equi-biaxial creep of stress relieved and recrystallized zircaloy-4 Acta Metallurgica Et Materialia. 42: 3653-3661. DOI: 10.1016/0956-7151(94)90431-6 |
0.425 |
|
| 1994 |
Earthman JC, Murty KL, Tanikella BV, Britt JC. Effects of grain-shape anisotropy and texture on balanced-biaxial creep of Ti and Zr alloys Jom. 46: 48-54. DOI: 10.1007/Bf03222610 |
0.493 |
|
| 1993 |
Murty KL. Significance and Role of Deformation Micromechanisms in Life-Predictive Modeling of Aging Structures Applied Mechanics Reviews. 46: 194-200. DOI: 10.1115/1.3120336 |
0.352 |
|
| 1989 |
Wechsler MS, Murty KL. Impurity-defect interactions and radiation hardening and embrittlement in BCC metals Metallurgical Transactions A. 20: 2637-2649. DOI: 10.1007/Bf02670157 |
0.421 |
|
| 1988 |
Daugherty WL, Murty KL. Application of texture in predicting nuclear fuel cladding creep Nuclear Technology. 80: 443-450. DOI: 10.13182/Nt88-A34068 |
0.313 |
|
| 1979 |
Murty KL, Yoon KK. Creep transients in zircaloy cladding Scripta Metallurgica. 13: 299-302. DOI: 10.1016/0036-9748(79)90316-8 |
0.312 |
|
| Show low-probability matches. |
