| Year |
Citation |
Score |
| 2021 |
Méité N, Konan LK, Tognonvi MT, Doubi BIHG, Gomina M, Oyetola S. Properties of hydric and biodegradability of cassava starch-based bioplastics reinforced with thermally modified kaolin. Carbohydrate Polymers. 254: 117322. PMID 33357883 DOI: 10.1016/j.carbpol.2020.117322 |
0.305 |
|
| 2020 |
Baley C, Gomina M, Breard J, Bourmaud A, Davies P. Variability of mechanical properties of flax fibres for composite reinforcement. A review Industrial Crops and Products. 145: 111984. DOI: 10.1016/J.Indcrop.2019.111984 |
0.379 |
|
| 2019 |
Poullain P, Leklou N, Laibi A, Gomina M. Properties of Compressed Earth Blocks Made of Traditional Materials from Benin Revue Des Composites Et Des MatéRiaux AvancéS. 29: 233-241. DOI: 10.18280/rcma.290407 |
0.302 |
|
| 2019 |
Zerbo L, Seynou M, Sorgho B, Lecomte-Nana G, Gomina M, Blanchart P. Microstructure and Weibull distribution of rupture strength of clay-talc ceramics CerâMica. 65: 240-245. DOI: 10.1590/0366-69132019653742518 |
0.37 |
|
| 2019 |
Ouedraogo M, Dao K, Millogo Y, Aubert J, Messan A, Seynou M, Zerbo L, Gomina M. Physical, thermal and mechanical properties of adobes stabilized with fonio (Digitaria exilis) straw Journal of Building Engineering. 23: 250-258. DOI: 10.1016/J.Jobe.2019.02.005 |
0.475 |
|
| 2019 |
Page J, Khadraoui F, Gomina M, Boutouil M. Influence of different surface treatments on the water absorption capacity of flax fibres: Rheology of fresh reinforced-mortars and mechanical properties in the hardened state Construction and Building Materials. 199: 424-434. DOI: 10.1016/J.Conbuildmat.2018.12.042 |
0.333 |
|
| 2019 |
Baley C, Gomina M, Breard J, Bourmaud A, Drapier S, Ferreira M, Duigou AL, Liotier PJ, Ouagne P, Soulat D, Davies P. Specific features of flax fibres used to manufacture composite materials International Journal of Material Forming. 12: 1023-1052. DOI: 10.1007/S12289-018-1455-Y |
0.412 |
|
| 2018 |
Kenfaui D, Gomina M, Noudem JG, Chateigner D. Anisotropy of Transport Properties Correlated to Grain Boundary Density and Quantified Texture in Thick Oriented Ca₃Co₄O₉ Ceramics. Materials (Basel, Switzerland). 11. PMID 30018194 DOI: 10.3390/Ma11071224 |
0.799 |
|
| 2018 |
Dao K, Ouedraogo M, Millogo Y, Aubert J, Gomina M. Thermal, hydric and mechanical behaviours of adobes stabilized with cement Construction and Building Materials. 158: 84-96. DOI: 10.1016/J.Conbuildmat.2017.10.001 |
0.447 |
|
| 2018 |
Pucci MF, Duchemin B, Gomina M, Bréard J. Temperature effect on dynamic wetting of cellulosic substrates by molten polymers for composite processing Composites Part a-Applied Science and Manufacturing. 114: 307-315. DOI: 10.1016/J.Compositesa.2018.08.031 |
0.363 |
|
| 2017 |
Bensadoun F, Verpoest I, Baets J, Müssig J, Graupner N, Davies P, Gomina M, Kervoelen A, Baley C. Impregnated fibre bundle test for natural fibres used in composites Journal of Reinforced Plastics and Composites. 36: 942-957. DOI: 10.1177/0731684417695461 |
0.341 |
|
| 2017 |
Barbulée A, Gomina M. Variability of the mechanical properties among flax fiber bundles and strands Procedia Engineering. 200: 487-493. DOI: 10.1016/J.Proeng.2017.07.068 |
0.333 |
|
| 2015 |
Kenfaui D, Sibeud PF, Gomina M, Louradour E, Chaud X, Noudem JG. Fostered Thermomagnetic Stabilities and Boosted Mechanical Reliability Related to High Trapped Field in Composite Bulk YBa2Cu3O(7-δ) Cryomagnets. The Journal of Physical Chemistry Letters. 6: 2999-3005. PMID 26267194 DOI: 10.1021/Acs.Jpclett.5B00906 |
0.754 |
|
| 2015 |
Sonnenfeld C, Luyckx G, Sulejmani S, Geernaert T, Eve S, Gomina M, Chah K, Mergo P, Urbanczyk W, Thienpont H, Degrieck J, Berghmans F. Microstructured optical fiber Bragg grating as an internal three-dimensional strain sensor for composite laminates Smart Materials and Structures. 24: 55003. DOI: 10.1088/0964-1726/24/5/055003 |
0.314 |
|
| 2015 |
Kenfaui D, Chateigner D, Gomina M, Noudem JG, BachirOuladdiaf, Dauscher A, Lenoir B. Volume Texture and Anisotropic Thermoelectric Properties in Ca3Co4O9 Bulk Materials Materials Today: Proceedings. 2: 637-646. DOI: 10.1016/J.Matpr.2015.05.089 |
0.792 |
|
| 2014 |
Sorgho B, Zerbo L, Keita I, Dembelé C, Pléa M, Sol V, Gomina M, Blanchart P. Strength and creep behavior of geomaterials for building with tannin addition Materials and Structures. 47: 937-946. DOI: 10.1617/S11527-013-0104-7 |
0.355 |
|
| 2014 |
Thuault A, Bazin J, Eve S, Bréard J, Gomina M. Numerical study of the influence of structural and mechanical parameters on the tensile mechanical behaviour of flax fibres Journal of Industrial Textiles. 44: 22-39. DOI: 10.1177/1528083713481835 |
0.315 |
|
| 2014 |
Blond D, Vieille B, Gomina M, Taleb L. Correlation between physical properties, microstructure and thermo-mechanical behavior of PPS-based composites processed by stamping Journal of Reinforced Plastics and Composites. 33: 1656-1668. DOI: 10.1177/0731684414541846 |
0.344 |
|
| 2014 |
Thuault A, Eve S, Blond D, Bréard J, Gomina M. Effects of the hygrothermal environment on the mechanical properties of flax fibres Journal of Composite Materials. 48: 1699-1707. DOI: 10.1177/0021998313490217 |
0.395 |
|
| 2014 |
Sonnenfeld C, Sulejmani S, Geernaert T, Eve S, Gomina M, Mergo P, Makara M, Skorupski K, Thienpont H, Berghmans F. Mechanical Strength of Microstructured Optical Fibers Journal of Lightwave Technology. 32: 2193-2201. DOI: 10.1109/Jlt.2014.2322201 |
0.321 |
|
| 2014 |
Keita I, Sorgho B, Dembele C, Plea M, Zerbo L, Guel B, Ouedraogo R, Gomina M, Blanchart P. Ageing of clay and clay–tannin geomaterials for building Construction and Building Materials. 61: 114-119. DOI: 10.1016/J.Conbuildmat.2014.03.005 |
0.394 |
|
| 2014 |
Barbulée A, Jernot J, Bréard J, Gomina M. Damage to flax fibre slivers under monotonic uniaxial tensile loading Composites Part a-Applied Science and Manufacturing. 64: 107-114. DOI: 10.1016/J.Compositesa.2014.04.024 |
0.311 |
|
| 2014 |
Kenfaui D, Gomina M, Chateigner D, Noudem JG. Mechanical properties of Ca3Co4O9 bulk oxides intended to be used in thermoelectric generators Ceramics International. 40: 10237-10246. DOI: 10.1016/J.Ceramint.2014.02.112 |
0.783 |
|
| 2013 |
Thuault A, Eve S, Jouannot-Chesney P, Bréard J, Gomina M. Interrelation Between the Variety and the Mechanical Properties of Flax Fibres Journal of Biobased Materials and Bioenergy. 7: 609-618. DOI: 10.1166/Jbmb.2013.1396 |
0.406 |
|
| 2013 |
Sonnenfeld C, Luyckx G, Collombet F, Grunevald Y-, Douchin B, Crouzeix L, Torres M, Geernaert T, Sulejmani S, Eve S, Gomina M, Chah K, Mergo P, Thienpont H, Berghmans F. Embedded fiber Bragg gratings in photonic crystal fiber for cure cycle monitoring of carbon fiber-reinforced polymer materials Proceedings of Spie. 8775. DOI: 10.1117/12.2020900 |
0.31 |
|
| 2012 |
Noudem JG, Kenfaui D, Chateigner D, Gomina M. Toward the enhancement of thermoelectric properties of lamellar Ca3Co4O9 by edge-free spark plasma texturing Scripta Materialia. 66: 258-260. DOI: 10.1016/J.Scriptamat.2011.11.004 |
0.781 |
|
| 2012 |
Kenfaui D, Lenoir B, Chateigner D, Ouladdiaf B, Gomina M, Noudem JG. Development of multilayer textured Ca3Co4O9 materials for thermoelectric generators: Influence of the anisotropy on the transport properties Journal of the European Ceramic Society. 32: 2405-2414. DOI: 10.1016/J.Jeurceramsoc.2012.03.022 |
0.772 |
|
| 2011 |
Bizet L, Bréard J, Bouquet G, Jernot J, Gomina M. Serial Sections Through A Continuous Fiber-Reinforced Polymer Composite Image Analysis & Stereology. 23: 167-176. DOI: 10.5566/Ias.V23.P167-176 |
0.359 |
|
| 2011 |
Kenfaui D, Chateigner D, Gomina M, Noudem JG. Anisotropy of the Mechanical and Thermoelectric Properties of Hot‐Pressed Single‐Layer and Multilayer Thick Ca3Co4O9 Ceramics International Journal of Applied Ceramic Technology. 8: 214-226. DOI: 10.1111/J.1744-7402.2009.02431.X |
0.787 |
|
| 2011 |
Noudem JG, Kenfaui D, Quetel-Weben S, Sanmathi CS, Retoux R, Gomina M. Spark Plasma Sintering of n-Type Thermoelectric Ca0.95Sm0.05MnO3 Journal of the American Ceramic Society. 94: 2608-2612. DOI: 10.1111/J.1551-2916.2011.04465.X |
0.779 |
|
| 2011 |
Noudem JG, Kenfaui D, Chateigner D, Gomina M. Granular and Lamellar Thermoelectric Oxides Consolidated by Spark Plasma Sintering Journal of Electronic Materials. 40: 1100-1106. DOI: 10.1007/S11664-011-1550-Z |
0.778 |
|
| 2010 |
Marinel S, Savary E, Gomina M. Sintering of CuO and ZnO in a single mode microwave cavity with shrinkage control. The Journal of Microwave Power and Electromagnetic Energy : a Publication of the International Microwave Power Institute. 44: 57-63. PMID 21721329 DOI: 10.1080/08327823.2010.11689770 |
0.389 |
|
| 2010 |
Charlet K, Jernot J, Gomina M, Bizet L, Bréard J. Mechanical Properties of Flax Fibers and of the Derived Unidirectional Composites Journal of Composite Materials. 44: 2887-2896. DOI: 10.1177/0021998310369579 |
0.328 |
|
| 2010 |
Kenfaui D, Bonnefont G, Chateigner D, Fantozzi G, Gomina M, Noudem JG. Ca3Co4O9 ceramics consolidated by SPS process: Optimisation of mechanical and thermoelectric properties Materials Research Bulletin. 45: 1240-1249. DOI: 10.1016/J.Materresbull.2010.05.006 |
0.796 |
|
| 2010 |
Kenfaui D, Chateigner D, Gomina M, Noudem JG. Texture, mechanical and thermoelectric properties of Ca3Co4O9 ceramics Journal of Alloys and Compounds. 490: 472-479. DOI: 10.1016/J.Jallcom.2009.10.048 |
0.81 |
|
| 2010 |
Charlet K, Jernot J, Breard J, Gomina M. Scattering of morphological and mechanical properties of flax fibres Industrial Crops and Products. 32: 220-224. DOI: 10.1016/J.Indcrop.2010.04.015 |
0.427 |
|
| 2010 |
Charlet K, Jernot JP, Eve S, Gomina M, Bréard J. Multi-scale morphological characterisation of flax: From the stem to the fibrils Carbohydrate Polymers. 82: 54-61. DOI: 10.1016/J.Carbpol.2010.04.022 |
0.378 |
|
| 2009 |
Charlet K, Eve S, Jernot JP, Gomina M, Breard J. Tensile deformation of a flax fiber Procedia Engineering. 1: 233-236. DOI: 10.1016/J.Proeng.2009.06.055 |
0.314 |
|
| 2009 |
Charlet K, Jernot JP, Gomina M, Bréard J, Morvan C, Baley C. Influence of an Agatha flax fibre location in a stem on its mechanical, chemical and morphological properties Composites Science and Technology. 69: 1399-1403. DOI: 10.1016/J.Compscitech.2008.09.002 |
0.356 |
|
| 2009 |
Kam S, Zerbo L, Bathiébo JD, Soro J, Naba S, Wenmenga U, Traoré K, Gomina M, Blanchart P. Permeability to water of sintered clay ceramics Applied Clay Science. 46: 351-357. DOI: 10.1016/J.Clay.2009.09.005 |
0.401 |
|
| 2008 |
Millogo Y, Hajjaji M, Ouedraogo R, Gomina M. Cement-lateritic gravels mixtures: Microstructure and strength characteristics Construction and Building Materials. 22: 2078-2086. DOI: 10.1016/J.Conbuildmat.2007.07.019 |
0.386 |
|
| 2007 |
Noudem JG, Meslin S, Horvath D, Harnois C, Chateigner D, Eve S, Gomina M, Chaud X, Murakami M. Fabrication of textured YBCO bulks with artificial holes Physica C-Superconductivity and Its Applications. 463: 301-307. DOI: 10.1016/J.Physc.2007.03.503 |
0.625 |
|
| 2007 |
Traoré K, Ouédraogo GV, Blanchart P, Jernot J-, Gomina M. Influence of calcite on the microstructure and mechanical properties of pottery ceramics obtained from a kaolinite-rich clay from Burkina Faso Journal of the European Ceramic Society. 27: 1677-1681. DOI: 10.1016/J.Jeurceramsoc.2006.04.147 |
0.45 |
|
| 2007 |
Eve S, Gomina M, Ozouf J-, Orange G. Microstructure of latex-filled plaster composites Journal of the European Ceramic Society. 27: 1395-1398. DOI: 10.1016/J.Jeurceramsoc.2006.04.022 |
0.331 |
|
| 2007 |
Eve S, Gomina M, Jernot J-, Ozouf J-, Orange G. Microstructure characterization of polyamide fibre/latex-filled plaster composites Journal of the European Ceramic Society. 27: 3517-3525. DOI: 10.1016/J.Jeurceramsoc.2005.04.026 |
0.371 |
|
| 2007 |
Arib A, Sarhiri A, Moussa R, Remmal T, Gomina M. Caractéristiques structurales et mécaniques de céramiques à base d'argiles : influence de la source de feldspath Comptes Rendus Chimie. 10: 502-510. DOI: 10.1016/J.Crci.2006.01.005 |
0.473 |
|
| 2007 |
Charlet K, Baley C, Morvan C, Jernot JP, Gomina M, Bréard J. Characteristics of Hermès flax fibres as a function of their location in the stem and properties of the derived unidirectional composites Composites Part a: Applied Science and Manufacturing. 38: 1912-1921. DOI: 10.1016/J.Compositesa.2007.03.006 |
0.411 |
|
| 2006 |
Eve S, Gomina M, Hamel J, Orange G. Investigation of the setting of polyamide fibre/latex-filled plaster composites Journal of the European Ceramic Society. 26: 2541-2546. DOI: 10.1016/J.Jeurceramsoc.2005.07.063 |
0.354 |
|
| 2005 |
Pinot L, Gomina M, Jernot J-, Moreau R, Nakache E. Cyclic fatigue behaviour of fibre reinforced rubber-toughened nylon composite materials Journal De Physique Iv. 123: 273-280. DOI: 10.1051/Jp4:2005123049 |
0.413 |
|
| 2005 |
El Kanouni MA, Aazzab B, Tricha L, Samdi A, Moussa R, Hamel J, Gomina M. Elaboration and characterization of dental plasters obtained from a Moroccan gypsum Journal De Physique Iv (Proceedings). 123: 245-249. DOI: 10.1051/Jp4:2005123044 |
0.348 |
|
| 2004 |
Eve S, Gomina M, Orange G. Effects of Polyamide and Polypropylene Fibres on the Setting and the Mechanical Properties of Plaster Key Engineering Materials. 2531-2536. DOI: 10.4028/Www.Scientific.Net/Kem.264-268.2531 |
0.382 |
|
| 2004 |
Eve S, Gomina M, Orange G. Microstructural and Mechanical Characterisation of Polyamide Fibre-Reinforced Latex-Filled Plaster Composite Materials Key Engineering Materials. 1479-1482. DOI: 10.4028/Www.Scientific.Net/Kem.264-268.1479 |
0.437 |
|
| 2003 |
Gomina M, Pinot L, Moreau R, Nakache E. Fracture Behaviour of Short Glass Fibre-Reinforced Rubber-Toughened Nylon Composites European Structural Integrity Society. 32: 399-418. DOI: 10.1016/S1566-1369(03)80112-7 |
0.391 |
|
| 2003 |
Gmouh A, Eve S, Samdi A, Moussa R, Hamel J, Gomina M. Changes in plaster microstructure by pre-stressing or by adding gypsum grains: microstructural and mechanical investigations Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 352: 325-332. DOI: 10.1016/S0921-5093(02)00938-3 |
0.433 |
|
| 2002 |
Eve S, Gomina M, Gmouh A, Samdi A, Moussa R, Orange G. Microstructural and mechanical behaviour of polyamide fibre-reinforced plaster composites Journal of the European Ceramic Society. 22: 2269-2275. DOI: 10.1016/S0955-2219(02)00014-6 |
0.415 |
|
| 2001 |
Moussa R, Assifaoui A, Sarhiri A, Gomina M. White Pastes Designed from Morrocan Raw-Materials for Ceramic Tiles Fabrication Key Engineering Materials. 1835-1840. DOI: 10.4028/Www.Scientific.Net/Kem.206-213.1835 |
0.35 |
|
| 2001 |
Gmouh A, Eve S, Samdi A, Moussa R, Orange G, Gomina M. Influences of the Nature and Concentration of Synthetic Fibres on the Mechanical Properties of Plaster-Based Composites Key Engineering Materials. 1193-1198. DOI: 10.4028/Www.Scientific.Net/Kem.206-213.1193 |
0.398 |
|
| 1998 |
Rouessac V, Poullain G, Provost J, Gomina M, Desgardin G. Influence of the secondary phases and post-annealing on the transport current density of sinter-forged (Bi, Pb)-2223 ceramics European Physical Journal-Applied Physics. 2: 145-149. DOI: 10.1051/Epjap:1998177 |
0.35 |
|
| 1998 |
Rouessac V, Gomina M. Anisotropic mechanical properties in sinter-forged bulk highly textured (Bi,Pb)-2223 ceramics Journal of the European Ceramic Society. 18: 81-85. DOI: 10.1016/S0955-2219(97)00095-2 |
0.486 |
|
| 1997 |
Zanzoun H, Gomina M, Moussa R. Influences of a CaCo3 Sintering Additive on the Physical and Mechanical Properties of Clay-Based Ceramics Key Engineering Materials. 2188-2191. DOI: 10.4028/Www.Scientific.Net/Kem.132-136.2188 |
0.419 |
|
| 1997 |
Rouessac V, Desgardin G, Gomina M. Influence of the sinter-forging conditions on the mechanical properties of textured bulk (Bi,Pb)-2223 ceramics Physica C-Superconductivity and Its Applications. 2573-2574. DOI: 10.1016/S0921-4534(97)01423-8 |
0.436 |
|
| 1994 |
Drissi-Habti M, Despierres T, Foubert J, Gomina M. Damage investigations in unidirectional SiC-MAS.L composite materials under quasi-static tensile loading Journal of the European Ceramic Society. 14: 91-96. DOI: 10.1016/0955-2219(94)90049-3 |
0.37 |
|
| 1993 |
Despierres T, Habti MD, Gomina M. Damage characterization of a 2D SiCSiC composite material Journal of the European Ceramic Society. 12: 309-314. DOI: 10.1016/0955-2219(93)90106-2 |
0.389 |
|
| 1992 |
Chermant J, Gomina M. Microstructure and thermomechanical behavior of a new class of materials: ceramic matrix composites Journal of Alloys and Compounds. 188: 49-59. DOI: 10.1016/0925-8388(92)90642-M |
0.434 |
|
| 1991 |
Vicens J, Rouillon M, Fourvel P, Abbé F, Gomina M, Chermant J. TEM observations of SiC-SiC materials with a carbon interphase after tests at high temperature Microscopy Microanalysis Microstructures. 2: 75-85. DOI: 10.1051/Mmm:019910020107500 |
0.438 |
|
| 1991 |
Gomina M, Fourvel P, Rouillon MH. High temperature mechanical behaviour of an uncoated SiC-SiC composite material Journal of Materials Science. 26: 1891-1898. DOI: 10.1007/Bf00543620 |
0.43 |
|
| 1990 |
Abbé F, Chermant L, Coster M, Gomina M, Chermant JL. Morphological characterization of ceramic-ceramic composites by image analysis Composites Science and Technology. 37: 109-127. DOI: 10.1016/0266-3538(90)90095-M |
0.385 |
|
| 1990 |
Fourvel P, Sylvestrini P, Rouillon MH, Vicens J, Gomina M. Structural modifications of a SiC-SiC material exposed to high temperatures in air Journal of Materials Science. 25: 5163-5165. DOI: 10.1007/Bf00580145 |
0.352 |
|
| 1987 |
Gomina M. Crack length measurements in a c/sic composite material International Journal of Fracture. 35. DOI: 10.1007/Bf00276361 |
0.349 |
|
| 1987 |
Gomina M, Themines D, Chermant JL, Osterstock F. An energy evaluation for C/SiC composite materials International Journal of Fracture. 34: 219-228. DOI: 10.1007/Bf00019719 |
0.389 |
|
| Show low-probability matches. |