| Year |
Citation |
Score |
| 2023 |
Li Y, Li W, Wang B, Min N, Liu W, Liu H, Jin X, Furuhara T. Transformable nanoprecipitates induced large ductility in a metastable cryogenic steel. Science Bulletin. PMID 37248097 DOI: 10.1016/j.scib.2023.05.027 |
0.301 |
|
| 2020 |
Zhou P, Yan Z, Wu Y, Li W, Jin X. Communication—The mechanism of hydrogen permeation resistance of Ni coating enhanced by the incorporation of graphene Ecs Journal of Solid State Science and Technology. 9: 93004. DOI: 10.1149/2162-8777/Ab96Ae |
0.319 |
|
| 2020 |
Jin M, Song Y, Wang X, Chen P, Pang G, Jin X. Ultrahigh damping capacity achieved by modulating R phase in Ti49.2Ni50.8 shape memory alloy wires Scripta Materialia. 183: 102-106. DOI: 10.1016/J.Scriptamat.2020.03.017 |
0.42 |
|
| 2020 |
Li Y, Li W, Min N, Liu W, Zhang C, Jin X. Mechanical response of a medium manganese steel with encapsulated austenite Scripta Materialia. 178: 211-217. DOI: 10.1016/J.Scriptamat.2019.11.033 |
0.47 |
|
| 2020 |
Xiao F, Li Z, Chen H, Li Z, Huang K, Jin X, Fukuda T. Martensitic transformation and elastocaloric effect of Ti–Ni–Cu–Al microwire Materialia. 9: 100547. DOI: 10.1016/J.Mtla.2019.100547 |
0.439 |
|
| 2020 |
Li Y, Li W, Xu C, Min N, Liu W, Liu H, Jin X. Investigation of hierarchical precipitation on bimodal-grained austenite and mechanical properties in quenching-partitioning-tempering steel Materials Science and Engineering: A. 781: 139207. DOI: 10.1016/J.Msea.2020.139207 |
0.385 |
|
| 2020 |
Li Y, Li W, Min N, Liu H, Jin X. Homogeneous elasto-plastic deformation and improved strain compatibility between austenite and ferrite in a co-precipitation hardened medium Mn steel with enhanced hydrogen embrittlement resistance International Journal of Plasticity. 133: 102805. DOI: 10.1016/J.Ijplas.2020.102805 |
0.387 |
|
| 2020 |
Xu Y, Gong Y, Du H, Ding W, Zhu B, Jin X, Zhang Y, Wang L. A newly-designed hot stamping plus non-isothermal Q&P process to improve mechanical properties of commercial QP980 steel International Journal of Lightweight Materials and Manufacture. 3: 26-35. DOI: 10.1016/J.Ijlmm.2019.11.003 |
0.377 |
|
| 2020 |
Du H, Gong Y, Liang T, Li Y, Xu Y, Lu X, Zeng Q, Jin X. Enhancement of Impact Toughness Via Tailoring Deformation Compatibility of Constituent Phases in Duplex Q&P Steel with Excellent Strength and Ductility Metallurgical and Materials Transactions A. 51: 2097-2117. DOI: 10.1007/S11661-020-05701-8 |
0.436 |
|
| 2020 |
Yang K, Ding W, Liu S, Li W, Jin X. Dominating Role of Film‐Like Carbon‐Enriched Austenite for the Simultaneous Improvement of Strength and Toughness in Low‐Carbon Steel Steel Research International. 2000344. DOI: 10.1002/Srin.202000344 |
0.394 |
|
| 2019 |
Liu B, Li W, Lu X, Jia X, Jin X. An integrated model of impact-abrasive wear in bainitic steels containing retained austenite Wear. 203088. DOI: 10.1016/J.Wear.2019.203088 |
0.359 |
|
| 2019 |
Liu B, Li W, Lu X, Jia X, Jin X. The effect of retained austenite stability on impact-abrasion wear resistance in carbide-free bainitic steels Wear. 127-136. DOI: 10.1016/J.Wear.2019.02.032 |
0.372 |
|
| 2019 |
Xiao F, Liang X, Chen H, Li Z, Li Z, Jin X, Fukuda T. Orientation dependence of elastocaloric effect in an aged Ni-rich Ti-Ni alloy Scripta Materialia. 168: 86-90. DOI: 10.1016/J.Scriptamat.2019.04.030 |
0.41 |
|
| 2019 |
Liang X, Xiao F, Chen H, Li Z, Li Z, Jin X, Fukuda T. Internal friction of the R-phase in single crystalline Ti-50.8Ni (at.%) alloy containing controlled precipitate of Ti3Ni4 Scripta Materialia. 166: 44-47. DOI: 10.1016/J.Scriptamat.2019.03.004 |
0.375 |
|
| 2019 |
Xu Y, Li W, Zuo X, Li Y, Zhang C, Min N, Chen H, Jin X. Nanoprecipitation-suppressed ferrite transformation (γ → α) during tempering in a medium‑manganese steel Scripta Materialia. 162: 391-396. DOI: 10.1016/J.Scriptamat.2018.11.050 |
0.341 |
|
| 2019 |
Chen H, Xiao F, Liang X, Li Z, Li Z, Jin X, Min N, Fukuda T. Improvement of the stability of superelasticity and elastocaloric effect of a Ni-rich Ti-Ni alloy by precipitation and grain refinement Scripta Materialia. 162: 230-234. DOI: 10.1016/J.Scriptamat.2018.11.024 |
0.429 |
|
| 2019 |
Liang X, Xiao F, Chen H, Li Z, Jin X, Fukuda T. Growth of B2 parent phase grain assisted by martensitic transformation in a nanocrystalline Ti-50.8Ni (at.%) shape memory alloy Scripta Materialia. 159: 37-40. DOI: 10.1016/J.Scriptamat.2018.09.002 |
0.408 |
|
| 2019 |
Luo L, Li W, Liu S, Wang L, Jin X. Effect of intermediate temperature annealing on the stability of retained austenite and mechanical properties of medium Mn-TRIP steel Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 742: 69-77. DOI: 10.1016/J.Msea.2018.10.102 |
0.462 |
|
| 2019 |
Wu D, Huang C, Zhang O, Zhao L, Li W, Jin X. Investigation of hydrogen diffusion and trapping behavior under tensile stresses in a container steel Materials Letters. 256: 126533. DOI: 10.1016/J.Matlet.2019.126533 |
0.333 |
|
| 2019 |
Song YW, Jin M, Zuo S, Jin X. Elinvar effect in severely-deformed Ti-50.8(at%)Ni thin belt Materials Letters. 252: 96-99. DOI: 10.1016/J.Matlet.2019.05.109 |
0.398 |
|
| 2019 |
Lu X, Qian D, Li W, Jin X. Enhanced toughness of bearing steel by combining prior cold deformation with martensite pre-quenching and bainite transformation Materials Letters. 234: 5-8. DOI: 10.1016/J.Matlet.2018.09.017 |
0.459 |
|
| 2019 |
Zhang K, Li W, Xu Y, Liu B, Li Y, Liu D, Ding X, Jin X. Rapid construction of multicomponent TRIP stainless steel by powder feeding laser deposition for comprehensive properties Materials & Design. 184: 108171. DOI: 10.1016/J.Matdes.2019.108171 |
0.364 |
|
| 2019 |
Pang G, Jin M, Zuo S, Jin X. Martensitic transformation and superelasticity in Au7Cu5Al4 shape memory alloy microwires Intermetallics. 112: 106527. DOI: 10.1016/J.Intermet.2019.106527 |
0.399 |
|
| 2019 |
Chen H, Xiao F, Liang X, Li Z, Li Z, Jin X, Fukuda T. Giant elastocaloric effect with wide temperature window in an Al-doped nanocrystalline Ti–Ni–Cu shape memory alloy Acta Materialia. 177: 169-177. DOI: 10.1016/J.Actamat.2019.07.033 |
0.457 |
|
| 2019 |
Xu Y, Li W, Wang M, Zhang X, Wu Y, Min N, Liu W, Jin X. Nano-sized MX carbonitrides contribute to the stability of mechanical properties of martensite ferritic steel in the later stages of long-term aging Acta Materialia. 175: 148-159. DOI: 10.1016/J.Actamat.2019.06.012 |
0.333 |
|
| 2019 |
Gonzalez CLJ, Li W, Gong Y, Jin X. A Finite-Element Approach for the Partitioning of Carbon in Q&P Steel Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science. 50: 1417-1427. DOI: 10.1007/S11663-019-01567-3 |
0.349 |
|
| 2019 |
Li Z, Xiao F, Liang X, Chen H, Li Z, Jin X, Fukuda T. Effect of Hydrogen Doping on Stress-Induced Martensitic Transformation in a Ti-Ni Shape Memory Alloy Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 50: 3033-3037. DOI: 10.1007/S11661-019-05258-1 |
0.419 |
|
| 2018 |
Xiao F, Chen H, Jin X, Nie Z, Kakeshita T, Fukuda T. Stress-induced reverse martensitic transformation in a Ti-51Ni (at%) alloy aged under uniaxial stress. Scientific Reports. 8: 6099. PMID 29666459 DOI: 10.1038/S41598-018-24411-1 |
0.383 |
|
| 2018 |
Li Y, Li W, Zhu X, Zhou H, Jin X. Mechanism of improved hydrogen embrittlement resistance of low-temperature plasma carburised stainless steel Surface Engineering. 34: 189-192. DOI: 10.1080/02670844.2016.1227520 |
0.351 |
|
| 2018 |
Liu B, Lu X, Li W, Jin X. Enhanced wear resistance of nanotwinned austenite in higher Si nanostructured bainitic steel Wear. 22-28. DOI: 10.1016/J.Wear.2017.11.021 |
0.425 |
|
| 2018 |
Xiao F, Chu K, Jin X, Ren F, Fukuda T, Kakeshita T, Sun Q. Size effect on the mechanical behavior of single crystalline Fe-31.2Pd (at.%) micropillars Scripta Materialia. 152: 141-145. DOI: 10.1016/J.Scriptamat.2018.04.026 |
0.323 |
|
| 2018 |
Khedr M, Li W, Zhu X, Zhou P, Gao S, Jin X. Improving hydrogen embrittlement resistance of Hadfield steel by thermo-mechanical flash-treatment Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 712: 133-139. DOI: 10.1016/J.Msea.2017.11.036 |
0.403 |
|
| 2018 |
Zuo S, Xiao F, Jin X, Fukuda T, Kakeshita T. High damping capacity of single crystalline iron-palladium alloy exhibiting a weak first-order martensitic transformation Journal of Alloys and Compounds. 740: 1007-1011. DOI: 10.1016/J.Jallcom.2017.12.304 |
0.421 |
|
| 2018 |
Zhou P, Li W, Zhao H, Jin X. Role of microstructure on electrochemical hydrogen permeation properties in advanced high strength steels International Journal of Hydrogen Energy. 43: 10905-10914. DOI: 10.1016/J.Ijhydene.2018.04.241 |
0.385 |
|
| 2018 |
Chen H, Xiao F, Liang X, Li Z, Jin X, Fukuda T. Stable and large superelasticity and elastocaloric effect in nanocrystalline Ti-44Ni-5Cu-1Al (at%) alloy Acta Materialia. 158: 330-339. DOI: 10.1016/J.Actamat.2018.08.003 |
0.431 |
|
| 2018 |
Li Y, Lu Y, Li W, Khedr M, Liu H, Jin X. Hierarchical microstructure design of a bimodal grained twinning-induced plasticity steel with excellent cryogenic mechanical properties Acta Materialia. 158: 79-94. DOI: 10.1016/J.Actamat.2018.06.019 |
0.425 |
|
| 2018 |
Li Y, Li W, Liu W, Wang X, Hua X, Liu H, Jin X. The austenite reversion and co-precipitation behavior of an ultra-low carbon medium manganese quenching-partitioning-tempering steel Acta Materialia. 146: 126-141. DOI: 10.1016/J.Actamat.2017.12.035 |
0.477 |
|
| 2018 |
Zheng H, Li W, Gong Y, Wang L, Jin X. Microstructure-based finite element modeling of effect of metastable austenite on mechanical properties of quenching and partitioning (Q&P) 980 steel Journal of Iron and Steel Research International. 25: 1140-1148. DOI: 10.1007/S42243-018-0181-5 |
0.414 |
|
| 2018 |
Xiao F, Fukuda T, Jin X, Liu J, Kakeshita T. Elastocaloric Effect Associated with Different Types of Martensitic Transformations: Typical First-Order and Weak First-Order Ones Physica Status Solidi B-Basic Solid State Physics. 255: 1700246. DOI: 10.1002/Pssb.201700246 |
0.425 |
|
| 2017 |
Zhou P, Li W, Li Y, Lu X, Jin X, Chen J. Fabrication and Corrosion Performances of Pure Ni and Ni-Based Coatings Containing Rare Earth Element Ce and Graphene by Reverse Pulse Electrodeposition Journal of the Electrochemical Society. 164. DOI: 10.1149/2.1261702Jes |
0.309 |
|
| 2017 |
Zhou P, Li W, Jin X. Comparison of Hydrogen Permeation Properties of Pure Ni, Ni-MoS2, Ni-Graphene Composite Coatings Deposited on Quenching and Partitioning Steel and the Hot-Dipping Galvanized Steel Journal of the Electrochemical Society. 164. DOI: 10.1149/2.0501707Jes |
0.377 |
|
| 2017 |
Zhou P, Li W, Li Y, Jin X. The Effect of MoS2Content on the Protective Performance of Ni-MoS2Composite Coatings against Hydrogen Embrittlement in High Strength Steel Journal of the Electrochemical Society. 164. DOI: 10.1149/2.0421702Jes |
0.387 |
|
| 2017 |
Wu K, Lu X, Zhou P, Li W, Jin X. Improved resistance to hydrogen embrittlement by tailoring the stability of retained austenite Materials Science and Technology. 33: 1497-1504. DOI: 10.1080/02670836.2017.1280119 |
0.368 |
|
| 2017 |
Luo L, Li W, Gong Y, Wang L, Jin X. Tensile behavior and deformation mechanism of quenching and partitioning treated steels at different deforming temperatures Journal of Iron and Steel Research International. 24: 1104-1108. DOI: 10.1016/S1006-706X(17)30160-7 |
0.447 |
|
| 2017 |
Liang X, Xiao F, Jin M, Jin X, Fukuda T, Kakeshita T. Elastocaloric effect induced by the rubber-like behavior of nanocrystalline wires of a Ti-50.8Ni (at.%) alloy Scripta Materialia. 134: 42-46. DOI: 10.1016/J.Scriptamat.2017.02.026 |
0.434 |
|
| 2017 |
Wang J, Wang Z, Wang X, Yang Q, Jin X, Wang L. Strengthening effect of nanoscale precipitation and transformation induced plasticity in a hot rolled copper-containing ferrite-based lightweight steel Scripta Materialia. 129: 25-29. DOI: 10.1016/J.Scriptamat.2016.10.025 |
0.442 |
|
| 2017 |
Luo L, Li W, Wang L, Zhou S, Jin X. Tensile behaviors and deformation mechanism of a medium Mn-TRIP steel at different temperatures Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 682: 698-703. DOI: 10.1016/J.Msea.2016.11.017 |
0.445 |
|
| 2017 |
Li Y, Li W, Min N, Liu W, Jin X. Effects of hot/cold deformation on the microstructures and mechanical properties of ultra-low carbon medium manganese quenching-partitioning-tempering steels Acta Materialia. 139: 96-108. DOI: 10.1016/J.Actamat.2017.08.003 |
0.473 |
|
| 2017 |
Xu Y, Nie Y, Wang M, Li W, Jin X. The effect of microstructure evolution on the mechanical properties of martensite ferritic steel during long-term aging Acta Materialia. 131: 110-122. DOI: 10.1016/J.Actamat.2017.03.045 |
0.363 |
|
| 2017 |
Liang X, Xiao F, Jin X, Fukuda T, Kakeshita T. Suppression of Martensitic Transformation in Co2Cr(Ga,Si) Heusler Alloys by Thermal Cycling Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 48: 2105-2108. DOI: 10.1007/S11661-017-4048-3 |
0.391 |
|
| 2016 |
Lu X, Li W, Zhao H, Jin X. Local Plastic Indentation Resistance of Retained Austenite in Bearing Steel Isij International. 56: 851-854. DOI: 10.2355/Isijinternational.Isijint-2015-480 |
0.354 |
|
| 2016 |
Zuo S, Jin M, Song Y, Jin X. B19-phase transition and related tensile properties of Ti50Ni30Cu20 shape memory alloy doped with hydrogen: Journal of Intelligent Material Systems and Structures. 27: 2517-2523. DOI: 10.1177/1045389X16633768 |
0.431 |
|
| 2016 |
Zhou P, Li W, Zhu X, Li Y, Jin X, Chen J. Graphene Containing Composite Coatings as a Protective Coatings against Hydrogen Embrittlement in Quenching & Partitioning High Strength Steel Journal of the Electrochemical Society. 163. DOI: 10.1149/2.0551605Jes |
0.324 |
|
| 2016 |
Wu R, Jin X, Wu X, Li W, Deng J, Shen Y, Wang L. Enhancement of mechanical properties for quenched and partitioned steels via intragranular austenite Ironmaking and Steelmaking. 43: 616-620. DOI: 10.1080/03019233.2015.1132124 |
0.459 |
|
| 2016 |
Zhu X, Zhang K, Li W, Jin X. Effect of retained austenite stability and morphology on the hydrogen embrittlement susceptibility in quenching and partitioning treated steels Materials Science and Engineering A. 658: 400-408. DOI: 10.1016/J.Msea.2016.02.026 |
0.389 |
|
| 2016 |
Wu R, Li J, Li W, Wu X, Jin X, Zhou S, Wang L. Effect of metastable austenite on fracture resistance of quenched and partitioned (Q and P) sheet steels Materials Science and Engineering A. 657: 57-63. DOI: 10.1016/J.Msea.2016.01.051 |
0.383 |
|
| 2016 |
Ni C, Ding H, Jin X. Super-plasticity via secondary twinning in magnesium nanowire revealed by molecular dynamics simulations Computational Materials Science. 111: 163-174. DOI: 10.1016/J.Commatsci.2015.09.016 |
0.348 |
|
| 2016 |
Liu G, Jin X, Qiu W, Ruan G, Li Y. The impact of bonite aggregate on the properties of lightweight cement-bonded bonite-alumina-spinel refractory castables Ceramics International. 42: 4941-4951. DOI: 10.1016/J.Ceramint.2015.12.008 |
0.332 |
|
| 2016 |
Xiao F, Liang X, Jin X, Nie Z, Kakeshita T, Fukuda T. Stable elastocaloric effect under tensile stress of iron-palladium alloy and its in situ X-ray observation Acta Materialia. 118: 88-94. DOI: 10.1016/J.Actamat.2016.07.030 |
0.375 |
|
| 2016 |
Wu R, Jin X, Wang C, Wang L. Effect of Intercritical Annealing on Microstructural Evolution and Properties of Quenched & Partitioned (Q&P) Steels Journal of Materials Engineering and Performance. 25: 1603-1610. DOI: 10.1007/S11665-016-1985-8 |
0.446 |
|
| 2016 |
Zhu X, Li W, Zhao H, Han Q, Wang L, Jiao H, Jin X. Unveiling the Origin of Work Hardening Behavior in an Ultrafine-Grained Manganese Transformation-Induced Plasticity Steel by Hydrogen Investigation Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 47: 4362-4367. DOI: 10.1007/S11661-016-3633-1 |
0.422 |
|
| 2016 |
Zhao H, Li W, Wang L, Zhou S, Jin X. The Deformation Behavior Analysis and Mechanical Modeling of Step/Intercritical Quenching and Partitioning-Treated Multiphase Steels Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 47: 3943-3955. DOI: 10.1007/S11661-016-3585-5 |
0.419 |
|
| 2016 |
Liu H, Sun F, Sun H, Liu B, Wang Y, Jin X. Analysis of microstructure and mechanical properties of ultrafine grained low carbon steel Journal Wuhan University of Technology, Materials Science Edition. 31: 1099-1104. DOI: 10.1007/S11595-016-1496-3 |
0.426 |
|
| 2015 |
Jin M, Li Q, Ying R, Lu X, Jin X, Ding X. Internal Friction Of Phase Transformations Observed Around Room Temperature In Ga-In-Sn Eutectic Alloys Archives of Metallurgy and Materials. 60: 2097-2100. DOI: 10.1515/Amm-2015-0354 |
0.422 |
|
| 2015 |
Lu X, Li W, Lu X, Jin M, Min N, Jin X. Mechanical Spectroscopy Of Bearing Steel Archives of Metallurgy and Materials. 60: 2085-2092. DOI: 10.1515/Amm-2015-0352 |
0.38 |
|
| 2015 |
Zuo S, Jin M, Chen D, Jin X. Origin of the anelastic behavior in Ti50Ni44Fe6 alloy Scripta Materialia. DOI: 10.1016/J.Scriptamat.2015.06.030 |
0.403 |
|
| 2015 |
Zhu X, Li W, Hsu TY, Zhou S, Wang L, Jin X. Improved resistance to hydrogen embrittlement in a high-strength steel by quenching-partitioning-tempering treatment Scripta Materialia. 97: 21-24. DOI: 10.1016/J.Scriptamat.2014.10.030 |
0.371 |
|
| 2015 |
Jin M, Geng Y, Zuo S, Jin X. Precipitation and its Effects on Martensitic Transformation in Fe-Ni-Co-Ti Alloys Materials Today: Proceedings. 2: S837-S840. DOI: 10.1016/J.Matpr.2015.07.412 |
0.435 |
|
| 2015 |
Li W, Zhu X, Wang C, Jin X. Effect of S-phase on the Hydrogen Induced Phase Transition and Hydrogen Embrittlement Susceptibility in AISI 304 Stainless Steel☆ Materials Today: Proceedings. 2. DOI: 10.1016/J.Matpr.2015.07.377 |
0.372 |
|
| 2015 |
Liu H, Sun H, Liu B, Li D, Sun F, Jin X. An ultrahigh strength steel with ultrafine-grained microstructure produced through intercritical deformation and partitioning process Materials and Design. 83: 760-767. DOI: 10.1016/J.Matdes.2015.06.047 |
0.446 |
|
| 2015 |
Xiao F, Fukuda T, Kakeshita T, Jin M, Jin X. Dynamic mechanical analysis of weak first-order martensitic transformation in an iron-palladium alloy Journal of Alloys and Compounds. 649: 211-215. DOI: 10.1016/J.Jallcom.2015.07.105 |
0.401 |
|
| 2015 |
Geng Y, Lee D, Xu X, Nagasako M, Jin M, Jin X, Omori T, Kainuma R. Coherency of ordered γ′ precipitates and thermoelastic martensitic transformation in FeNiCoAlTaB alloys Journal of Alloys and Compounds. 628: 287-292. DOI: 10.1016/J.Jallcom.2014.12.172 |
0.414 |
|
| 2015 |
Xiao F, Jin M, Liu J, Jin X. Elastocaloric effect in Ni50Fe19Ga27Co4 single crystals Acta Materialia. 96: 292-300. DOI: 10.1016/J.Actamat.2015.05.054 |
0.34 |
|
| 2015 |
Xiao F, Fukuda T, Kakeshita T, Jin X. Elastocaloric effect by a weak first-order transformation associated with lattice softening in an Fe-31.2Pd (at.%) alloy Acta Materialia. 87: 8-14. DOI: 10.1016/J.Actamat.2015.01.004 |
0.43 |
|
| 2015 |
Lu X, Li W, Wang C, Zhao H, Jin X. Effects of Sub-zero Celsius Treatment and Tempering on the Stability of Retained Austenite in Bearing Steel Acta Metallurgica Sinica (English Letters). 28: 787-792. DOI: 10.1007/S40195-015-0264-2 |
0.382 |
|
| 2015 |
Wu R, Li W, Wang C, Xiao Y, Wang L, Jin X. Stability of Retained Austenite Through a Combined Intercritical Annealing and Quenching and Partitioning (IAQP) Treatment Acta Metallurgica Sinica (English Letters). 28: 386-393. DOI: 10.1007/S40195-015-0217-9 |
0.443 |
|
| 2014 |
Liu J, Liu Z, Jin X. Origin of tweed in Au–Cu–Al alloys Philosophical Magazine. 94: 56-72. DOI: 10.1080/14786435.2013.839890 |
0.376 |
|
| 2014 |
Liu H, Liu B, Li D, Sun H, Sun F, Jin X. Microstructural Characterization of Welded Joint in Duplex Stainless Steel by Laser Continuous Heat Treatment Journal of Iron and Steel Research International. 21: 710-714. DOI: 10.1016/S1006-706X(14)60110-2 |
0.39 |
|
| 2014 |
Lu X, Jin M, Zhao H, Li W, Jin X. Origin of low-temperature shoulder internal friction peak of Snoek-Köster peak in a medium carbon high alloyed steel Solid State Communications. 195: 31-34. DOI: 10.1016/J.Ssc.2014.06.018 |
0.375 |
|
| 2014 |
Zhu X, Li W, Zhao H, Wang L, Jin X. Hydrogen trapping sites and hydrogen-induced cracking in high strength quenching & partitioning (Q&P) treated steel International Journal of Hydrogen Energy. 39: 13031-13040. DOI: 10.1016/J.Ijhydene.2014.06.079 |
0.35 |
|
| 2014 |
Wu R, Li W, Zhou S, Zhong Y, Wang L, Jin X. Effect of Retained Austenite on the Fracture Toughness of Quenching and Partitioning (Q&P)-Treated Sheet Steels Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 45: 1892-1902. DOI: 10.1007/S11661-013-2113-0 |
0.314 |
|
| 2014 |
Liu H, Liu B, Li D, Sun H, Sun F, Jin X, Zhang Y. Hot Deformation Behavior of Low Carbon Steel during Compression at Elevated Temperature Journal of Wuhan University of Technology-Materials Science Edition. 29: 601-605. DOI: 10.1007/S11595-014-0964-X |
0.374 |
|
| 2013 |
Wang L, Cui YG, Wan JF, Rong YH, Zhang JH, Jin X, Cai MM. In situ atomic force microscope study of high-temperature untwinning surface relief in Mn-Fe-Cu antiferromagnetic shape memory alloy Applied Physics Letters. 102: 181901. DOI: 10.1063/1.4804259 |
0.354 |
|
| 2013 |
Jin M, Zhou W, Jin X, Fukuda T, Kakeshita T. Promoting martensitic transformation in Fe–Ni nanoparticles prepared by a Sol–gel and Reduction method Materials Letters. 109: 190-194. DOI: 10.1016/J.Matlet.2013.07.058 |
0.317 |
|
| 2013 |
Lu X, Liu H, Jin X. Preliminary study on kinetics of carbon partitioning in a high Ni Q&P steel Journal of Alloys and Compounds. 577. DOI: 10.1016/J.Jallcom.2012.05.038 |
0.428 |
|
| 2013 |
Jin X, Liu J, Jin M. Martensitic transformation and precursor phenomena in Au7Cu5Al4 alloys Journal of Alloys and Compounds. 577. DOI: 10.1016/J.Jallcom.2012.04.072 |
0.443 |
|
| 2013 |
Geng Y, Jin M, Ren W, Zhang W, Jin X. Effects of aging treatment on martensitic transformation of Fe–Ni–Co–Al–Ta–B alloys Journal of Alloys and Compounds. 577: S631-S635. DOI: 10.1016/J.Jallcom.2012.03.033 |
0.406 |
|
| 2013 |
Li J, Liu J, Jin M, Jin X. Grain size dependent phase stability of pulse electrodeposited nano-grained Co–Ni films Journal of Alloys and Compounds. 577. DOI: 10.1016/J.Jallcom.2012.02.002 |
0.411 |
|
| 2013 |
Zhu X, Li W, Zhao H, Jin X. Effects of cryogenic and tempered treatment on the hydrogen embrittlement susceptibility of TRIP-780 steels International Journal of Hydrogen Energy. 38: 10694-10703. DOI: 10.1016/J.Ijhydene.2013.05.113 |
0.387 |
|
| 2012 |
Liu H, Jin X. Secondary Austenite Morphologies in Fusion Zone of Welded Joint after Postweld Heat Treatment with a Continuous Wave Laser Journal of Materials Science & Technology. 28: 249-254. DOI: 10.1016/S1005-0302(12)60049-8 |
0.4 |
|
| 2012 |
Zhang J, Jin M, Xiao F, Li C, Jin X. Martensitic transformation in Fe–Ni nanoparticles prepared by a sol–gel process Materials Letters. 80: 152-154. DOI: 10.1016/J.Matlet.2012.02.133 |
0.311 |
|
| 2012 |
Wan H, Shen Y, Wang J, Shen Z, Jin X. A predictive model for microstructure evolution in metallic multilayers with immiscible constituents Acta Materialia. 60: 6869-6881. DOI: 10.1016/J.Actamat.2012.08.062 |
0.32 |
|
| 2011 |
Liu J, Jin M, Ni C, Shen Y, Fan G, Wang Z, Zhang Y, Li C, Liu Z, Jin X. Strain glassy behavior and premartensitic transition in Au(7)Cu(5)Al(4) alloy Physical Review B. 84: 140102. DOI: 10.1103/Physrevb.84.140102 |
0.38 |
|
| 2011 |
Liu H, Lu X, Jin X, Dong H, Shi J. Enhanced mechanical properties of a hot stamped advanced high-strength steel treated by quenching and partitioning process Scripta Materialia. 64: 749-752. DOI: 10.1016/J.Scriptamat.2010.12.037 |
0.44 |
|
| 2011 |
Liu H, Lu X, Jin X. Phase transformation and mechanical properties in laser continuous heat treatment welds Materials & Design. 32: 2269-2276. DOI: 10.1016/J.Matdes.2010.11.016 |
0.377 |
|
| 2011 |
Liu H, Jin X, Dong H, Shi J. Martensitic microstructural transformations from the hot stamping, quenching and partitioning process Materials Characterization. 62: 223-227. DOI: 10.1016/J.Matchar.2010.12.003 |
0.421 |
|
| 2011 |
Ding H, Xu B, Ni C, Wang J, Jin X. Monte Carlo simulation of B2-L21 ordering transitions in Au-Cu-Al alloy systems Journal of Shanghai Jiaotong University (Science). 16: 186-189. DOI: 10.1007/S12204-011-1115-6 |
0.321 |
|
| 2011 |
Liu H, Jin X. Electrochemical corrosion behavior of the laser continuous heat treatment welded joints of 2205 duplex stainless steel Journal of Wuhan University of Technology-Materials Science Edition. 26: 1140-1147. DOI: 10.1007/S11595-011-0378-Y |
0.388 |
|
| 2010 |
Min N, Li W, Li H, Jin X. Atom Probe and Mössbauer Spectroscopy Investigations of Cementite Dissolution in a Cold Drawn Eutectoid Steel Journal of Materials Science & Technology. 26: 776-782. DOI: 10.1016/S1005-0302(10)60123-5 |
0.39 |
|
| 2010 |
Jin M, Liu J, Jin X. Ordering transitions in quenched Au7Cu5Al4 alloy and effect of order on martensitic transformation Intermetallics. 18: 846-850. DOI: 10.1016/J.Intermet.2009.12.008 |
0.421 |
|
| 2009 |
Jin M, Gu Y, Jin X. Characterization of ordering transitions in Au–Cu–Al alloys Materials Characterization. 60: 1395-1399. DOI: 10.1016/J.Matchar.2009.06.013 |
0.541 |
|
| 2009 |
Gu Y, Jin M, Jin X. A2 → B2 → L21 ordering transitions in Au–Cu–Al alloys Intermetallics. 17: 704-707. DOI: 10.1016/J.Intermet.2009.02.012 |
0.542 |
|
| 2008 |
Min N, Li W, Jin X. α to γ transformation in the nanostructured surface layer of pearlitic steels near room temperature Scripta Materialia. 59: 806-809. DOI: 10.1016/J.Scriptamat.2008.05.038 |
0.387 |
|
| 2008 |
Peng Z, Jin X, Hsu TY, Pagounis E. Relaxation of twin boundaries in a Ni2MnGa single crystalline Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 481: 310-313. DOI: 10.1016/J.Msea.2006.11.180 |
0.352 |
|
| 2007 |
Stanford NE, Chen K, Dunne DP, Jin X. Effect of Alloying Additions on the SFE, Neel Temperature and Shape Memory Effect in Fe-Mn-Si-based Alloys Isij International. 47: 883-889. DOI: 10.2355/Isijinternational.47.883 |
0.388 |
|
| 2005 |
Jin X. Martensitic transformation in zirconia containing ceramics and its applications Current Opinion in Solid State & Materials Science. 9: 313-318. DOI: 10.1016/J.Cossms.2006.02.012 |
0.306 |
|
| 2004 |
Peng Z, Jin X, Fan Y, Hsu TY, Allen SM, O'Handley RC. Internal friction and modulus changes associated with martensitic and reverse transformations in a single crystal Ni 48.5Mn 31.4Ga 20.1 alloy Journal of Applied Physics. 95: 6960-6962. DOI: 10.1063/1.1676056 |
0.401 |
|
| 2003 |
Jin X, Bono D, Henry C, Feuchtwanger J, Allen SM, O'Handley RC. Relaxation in Ni-Mn-Ga ferromagnetic shape memory alloys Philosophical Magazine. 83: 3193-3199. DOI: 10.1080/14786430310001603463 |
0.385 |
|
| 2003 |
Jin X, Bono D, O'Handley RC, Allen SM, Hsu TY. Magnetic field effects on strain and resistivity during the martensitic transformation in Ni-Mn-Ga single crystals Journal of Applied Physics. 93: 8630-8632. DOI: 10.1063/1.1558243 |
0.331 |
|
| 2002 |
Jin X, Marioni M, Bono D, Allen SM, O'Handley RC, Hsu TY. Empirical mapping of Ni-Mn-Ga properties with composition and valence electron concentration Journal of Applied Physics. 91: 8222-8224. DOI: 10.1063/1.1453943 |
0.373 |
|
| Show low-probability matches. |