| Year |
Citation |
Score |
| 2015 |
Matsuno T, Teodosiu C, Maeda D, Uenishi A. Mesoscale simulation of the early evolution of ductile fracture in dual-phase steels International Journal of Plasticity. 74: 17-34. DOI: 10.1016/J.Ijplas.2015.06.004 |
0.436 |
|
| 2011 |
Sun Z, Teodosiu C, Takamura M, Makinouchi A. Development of Complex Elements for 3D Elastoplastic FEM Analysis Transactions of the Japan Society of Mechanical Engineers. A. 77: 4-15. DOI: 10.1299/Kikaia.77.4 |
0.342 |
|
| 2011 |
Butuc MC, Teodosiu C, Barlat F, Gracio JJ. Analysis of sheet metal formability through isotropic and kinematic hardening models European Journal of Mechanics a-Solids. 30: 532-546. DOI: 10.1016/J.Euromechsol.2011.03.005 |
0.521 |
|
| 2010 |
Morita SY, Nishidate Y, Nagata T, Yamagata Y, Teodosiu C. Ray-tracing simulation method using piecewise quadratic interpolant for aspheric optical systems. Applied Optics. 49: 3442-51. PMID 20563195 DOI: 10.1364/Ao.49.003442 |
0.34 |
|
| 2009 |
Rabahallah M, Balan T, Bouvier S, Bacroix B, Barlat F, Chung K, Teodosiu C. Parameter identification of advanced plastic strain rate potentials and impact on plastic anisotropy prediction International Journal of Plasticity. 25: 491-512. DOI: 10.1016/J.Ijplas.2008.03.006 |
0.447 |
|
| 2008 |
Hama T, Takamura M, Makinouchi A, Teodosiu C, Takuda H. Effect of Tool-Modeling Accuracy on Square-Cup Deep-Drawing Simulation Materials Transactions. 49: 278-283. DOI: 10.2320/Matertrans.P-Mra2007885 |
0.469 |
|
| 2008 |
Hama T, Takamura M, Makinouchi A, Teodosiu C, Takuda H. Formulation of Contact Problems in Sheet Metal Forming Simulation Using Local Interpolation for Tool Surfaces Journal of Computational Science and Technology. 2: 68-80. DOI: 10.1299/Jcst.2.68 |
0.368 |
|
| 2008 |
Hama T, Nagata T, Teodosiu C, Makinouchi A, Takuda H. Finite-element simulation of springback in sheet metal forming using local interpolation for tool surfaces International Journal of Mechanical Sciences. 50: 175-192. DOI: 10.1016/J.Ijmecsci.2007.07.005 |
0.484 |
|
| 2007 |
Hama T, Takamura M, Makinouchi A, Teodosiu C, Takuda H. Effect of Tool Modeling Accuracy on Square Cup Deep-Drawing Simulation Journal of the Japan Society For Technology of Plasticity. 48: 61-65. DOI: 10.9773/Sosei.48.61 |
0.42 |
|
| 2007 |
Hama T, Takamura M, Teodosiu C, Makinouchi A, Takuda H. Effect of Tool Modeling Accuracy on Sheet Metal Forming Simulation Key Engineering Materials. 743-748. DOI: 10.4028/Www.Scientific.Net/Kem.340-341.743 |
0.501 |
|
| 2007 |
Rabahallah M, Balan T, Bouvier S, Bacroix B, Teodosiu C. Finite element simulation of sheet metal forming using anisotropic strain-rate potentials Aip Conference Proceedings. 908: 643-648. DOI: 10.1063/1.2740883 |
0.407 |
|
| 2006 |
Takamura M, Ohura K, Sunaga H, Kuwabara T, Makinouchi A, Teodosiu C. Sheet Forming Simulation Using Static Explicit FEM Program Coupled with Elastic Deformation of Tools Journal of the Japan Society For Technology of Plasticity. 47: 64-68. DOI: 10.9773/Sosei.47.64 |
0.394 |
|
| 2006 |
Hama T, Takamura M, Makinouchi A, Teodosiu C, Takuda H. Formulation of Contact Problems in Sheet Metal Forming Simulation Using Local Interpolation for Tool Surfaces Transactions of the Japan Society of Mechanical Engineers. A. 72: 216-223. DOI: 10.1299/Kikaia.72.216 |
0.464 |
|
| 2006 |
Banu M, Takamura M, Hama T, Naidim O, Teodosiu C, Makinouchi A. Simulation of springback and wrinkling in stamping of a dual phase steel rail-shaped part Journal of Materials Processing Technology. 173: 178-184. DOI: 10.1016/J.Jmatprotec.2005.11.023 |
0.613 |
|
| 2006 |
Bouvier S, Haddadi H, Levée P, Teodosiu C. Simple shear tests: Experimental techniques and characterization of the plastic anisotropy of rolled sheets at large strains Journal of Materials Processing Technology. 172: 96-103. DOI: 10.1016/J.Jmatprotec.2005.09.003 |
0.464 |
|
| 2006 |
Bouvier S, Gardey B, Haddadi H, Teodosiu C. Characterization of the strain-induced plastic anisotropy of rolled sheets by using sequences of simple shear and uniaxial tensile tests Journal of Materials Processing Technology. 174: 115-126. DOI: 10.1016/J.Jmatprotec.2005.04.086 |
0.501 |
|
| 2006 |
Haddadi H, Bouvier S, Banu M, Maier C, Teodosiu C. Towards an accurate description of the anisotropic behaviour of sheet metals under large plastic deformations: Modelling, numerical analysis and identification International Journal of Plasticity. 22: 2226-2271. DOI: 10.1016/J.Ijplas.2006.03.010 |
0.641 |
|
| 2005 |
Miyamura T, Yamada T, Akiba H, Makinouchi A, Teodosiu C. Finite Element Analysis Based on Volume CAD Jsme International Journal Series C-Mechanical Systems Machine Elements and Manufacturing. 48: 209-217. DOI: 10.1299/Jsmec.48.209 |
0.337 |
|
| 2005 |
Hama T, Asakawa M, Takamura M, Makinouchi A, Teodosiu C. Effect of Force Correction Algorithm Arising from Change of Tool Normal on Sheet Metal Forming Simulation Jsme International Journal Series a-Solid Mechanics and Material Engineering. 48: 329-334. DOI: 10.1299/Jsmea.48.329 |
0.385 |
|
| 2004 |
Uenishi A, Teodosiu C. Constitutive modelling of the high strain rate behaviour of interstitial-free steel International Journal of Plasticity. 20: 915-936. DOI: 10.1016/J.Ijplas.2003.06.004 |
0.468 |
|
| 2003 |
Bouvier S, Teodosiu C, Haddadi H, Tabacaru V. Anisotropic work-hardening behaviour of structural steels and aluminium alloys at large strains Journal De Physique Iv. 105: 215-222. DOI: 10.1051/Jp4:20030190 |
0.495 |
|
| 2003 |
Li S, Hoferlin E, Bael AV, Houtte PV, Teodosiu C. Finite element modeling of plastic anisotropy induced by texture and strain-path change International Journal of Plasticity. 19: 647-674. DOI: 10.1016/S0749-6419(01)00079-1 |
0.543 |
|
| 2002 |
Peeters B, Kalidindi SR, Teodosiu C, Van Houtte P, Aernoudt E. Modelling microstructure-based anisotropy in BCC polycrystals during changing strain paths Solid State Phenomena. 87: 163-168. DOI: 10.4028/Www.Scientific.Net/Ssp.87.163 |
0.437 |
|
| 2002 |
Reis A, Santos AD, Duarte JF, Rocha AB, Li SY, Hoferlin E, Bael AV, Houtte Pv, Teodosiu C. Finite-Element Simulation and Experimental Validation of a Plasticity Model of Texture and Strain-Induced Anisotropy Key Engineering Materials. 501-504. DOI: 10.4028/Www.Scientific.Net/Kem.230-232.501 |
0.518 |
|
| 2002 |
Zisman A, Nesterova E, Rybin V, Teodosiu C. Interfacial misorientations and underlying slip activity of a shear microband in mild steel: TEM analysis and numerical simulation Scripta Materialia. 46: 729-733. DOI: 10.1016/S1359-6462(02)00061-1 |
0.451 |
|
| 2002 |
Peeters B, Kalidindi SR, Teodosiu C, Houtte PV, Aernoudt E. A theoretical investigation of the influence of dislocation sheets on evolution of yield surfaces in single-phase B.C.C. polycrystals Journal of the Mechanics and Physics of Solids. 50: 783-807. DOI: 10.1016/S0022-5096(01)00094-1 |
0.459 |
|
| 2001 |
Peeters B, Teodosiu C, Kalidindi SR, Van Houtte P, Aernoudt E. Modelling of the evolution of dislocation sheets during strain-path changes and their influence on the Bauschinger effect of B.C.C. polycrystals Journal De Physique. Iv : Jp. 11. DOI: 10.1051/Jp4:2001515 |
0.393 |
|
| 2001 |
Peeters B, Bacroix B, Teodosiu C, Houtte PV, Aernoudt E. Work-hardening/softening behaviour of B.C.C. polycrystals during changing strain paths: II. TEM observations of dislocation sheets in an if steel during two-stage strain paths and their representation in terms of dislocation densities Acta Materialia. 49: 1621-1632. DOI: 10.1016/S1359-6454(01)00067-2 |
0.471 |
|
| 2001 |
Peeters B, Seefeldt M, Teodosiu C, Kalidindi SR, Van Houtte P, Aernoudt E. Work-hardening/softening behaviour of b.c.c. polycrystals during changing strain paths: I. An integrated model based on substructure and texture evolution, and its prediction of the stress-strain behaviour of an if steel during two-stage strain paths Acta Materialia. 49: 1607-1619. DOI: 10.1016/S1359-6454(01)00066-0 |
0.485 |
|
| 1999 |
Haddadi H, Teodosiu C. 3D-analysis of the effect of interfacial debonding on the plastic behaviour of two-phase composites Computational Materials Science. 16: 315-322. DOI: 10.1016/S0927-0256(99)00074-9 |
0.342 |
|
| 1999 |
Zisman A, Teodosiu C, Rybin V. Micromechanics of shear microbands under strain-path changes in mild steel Computational Materials Science. 16: 307-314. DOI: 10.1016/S0927-0256(99)00073-7 |
0.408 |
|
| 1998 |
Hiwatashi S, Bael AV, Houtte PV, Teodosiu C. Prediction of forming limit strains under strain-path changes: Application of an anisotropic model based on texture and dislocation structure International Journal of Plasticity. 14: 647-669. DOI: 10.1016/S0749-6419(98)00031-X |
0.466 |
|
| 1997 |
Hiwatashi S, Bael AV, Houtte PV, Teodosiu C. Modelling of plastic anisotropy based on texture and dislocation structure Computational Materials Science. 9: 274-284. DOI: 10.1016/S0927-0256(97)00069-4 |
0.491 |
|
| 1995 |
Teodosiu C, Daniel D, Cao H, Duval J. Modelling and simulation of the can-making process using solid finite elements Journal of Materials Processing Technology. 50: 133-143. DOI: 10.1016/0924-0136(94)01375-B |
0.332 |
|
| 1992 |
Hu Z, Rauch EF, Teodosiu C. Work-hardening behavior of mild steel under stress reversal at large strains International Journal of Plasticity. 8: 839-856. DOI: 10.1016/0749-6419(92)90006-X |
0.439 |
|
| Show low-probability matches. |