☰

Guoqun Zhao - Publications

Affiliations: 
Department of Materials Science & Engineering Shandong University, Jinan Shi, Shandong Sheng, China 
Tree Info Similar researchers PubMed Report error

235 high-probability publications. We are testing a new system for linking publications to authors. You can help! If you notice any inaccuracies, please sign in and mark papers as correct or incorrect matches. If you identify any major omissions or other inaccuracies in the publication list, please let us know.

Year Citation  Score
2021 Lin J, Li J, Liu T, Zhu L, Chu X, Zhao G, Guan Y. Evaluation of friction reduction and frictionless stress in ultrasonic vibration forming process Journal of Materials Processing Technology. 288: 116881. DOI: 10.1016/J.Jmatprotec.2020.116881  0.314
2020 Zheng C, Tian Z, Zhao X, Tan Y, Zhang G, Zhao G, Ji Z. Effect of pulsed laser parameters on deformation inhomogeneity in laser shock incremental forming of pure copper foil Optics and Laser Technology. 127: 106205. DOI: 10.1016/J.Optlastec.2020.106205  0.31
2020 Zhang S, Chen L, Li Z, Zhao G, Zhang C. Investigation on microstructure and mechanical properties of in-situ TiB2/Al–Cu–Mg composite profile fabricated by porthole die extrusion Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 786: 139449. DOI: 10.1016/J.Msea.2020.139449  0.34
2020 Tang J, Chen L, Zhao G, Zhang C, Chu X. Formation mechanism of abnormal coarse grains on weld seam of extruded ZK60 alloy and the effects on mechanical properties Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 773: 138718. DOI: 10.1016/J.Msea.2019.138718  0.333
2020 Shi Z, Ma X, Zhao G, Wang G, Zhang L, Li B. Fabrication of high porosity Nanocellular polymer foams based on PMMA/PVDF blends Materials & Design. 195: 109002. DOI: 10.1016/J.Matdes.2020.109002  0.376
2020 Chen X, Ma X, Xi H, Zhao G, Wang Y, Xu X. Effects of heat treatment on the microstructure and mechanical properties of extruded 2196 Al-Cu-Li alloy Materials & Design. 192: 108746. DOI: 10.1016/J.Matdes.2020.108746  0.339
2020 Liu M, Zhang C, He H, Zhao G, Chen L, Ma X. Interface microstructure evolution and mechanical properties of the extruded fiber-reinforced aluminum-based composite bar Materials & Design. 188: 108446. DOI: 10.1016/J.Matdes.2019.108446  0.371
2020 Mu Y, Hang L, Zhao G, Wang X, Zhou Y, Cheng Z. Modeling and simulation for the investigation of polymer film casting process using finite element method Mathematics and Computers in Simulation. 169: 88-102. DOI: 10.1016/J.Matcom.2019.09.012  0.337
2020 Hu F, Zhang W, Xue Y, Lin K, Lu B, Xu J, Zhao G. Tuning optoelectronic performances for 3-methylselenophene-EDOT hybrid polymer Materials Chemistry and Physics. 244: 122699. DOI: 10.1016/J.Matchemphys.2020.122699  0.626
2020 Zhang C, Guo R, Liu M, Zhang Z, Chen L, Zhao G. Influence of isothermal and non-isothermal aging treatments on microstructure and properties of Al-Zn-Mg alloy helical profile Materials Characterization. 110613. DOI: 10.1016/J.Matchar.2020.110613  0.344
2020 Xu X, Ma X, Yu S, Zhao G, Wang Y, Chen X. Bonding mechanism and mechanical properties of 2196 Al-Cu-Li alloy joined by hot compression deformation Materials Characterization. 167: 110486. DOI: 10.1016/J.Matchar.2020.110486  0.347
2020 Li Z, Chen L, Tang J, Zhao G, Zhang C, Chu X. Microstructure evolution, plastic anisotropy, and intergranular corrosion of Al-Mg-Si sheet processed through a combination of hot extrusion and cold rolling Materials Characterization. 164: 110299. DOI: 10.1016/J.Matchar.2020.110299  0.367
2020 Chen L, Yuan S, Li Z, Zheng W, Zhao G, Zhang C. Influence of homogenization treatment on microstructure and mechanical properties of Al-Zn-Mg alloy extruded by porthole die Materials Characterization. 161: 110148. DOI: 10.1016/J.Matchar.2020.110148  0.381
2020 Tang J, Chen L, Zhao G, Zhang C, Chu X. Formation mechanism and evolution of surface coarse grains on a ZK60 Mg profile extruded by a porthole die Journal of Materials Science & Technology. 47: 88-102. DOI: 10.1016/J.Jmst.2019.11.037  0.357
2020 Wang Y, Zhang C, Yang Y, Wang Y, Zhao G, Chen L. The identification of improved Johnson-Cook constitutive model in a wide range of temperature and its application in predicting FLCs of Al–Mg–Li sheet Journal of Materials Research and Technology. 9: 3782-3795. DOI: 10.1016/J.Jmrt.2020.02.005  0.332
2020 Xu X, Zhao G, Yu S, Wang Y, Chen X, Zhang W. Effects of extrusion parameters and post-heat treatments on microstructures and mechanical properties of extrusion weld seams in 2195 Al-Li alloy profiles Journal of Materials Research and Technology. 9: 2662-2678. DOI: 10.1016/J.Jmrt.2019.12.095  0.368
2020 Li S, Chen L, Chu X, Tang J, Zhao G, Zhang C. Improvement in mechanical properties of Al-Zn-Mg alloy by applying electric pulse during hot extrusion Journal of Materials Research and Technology. 9: 1210-1220. DOI: 10.1016/J.Jmrt.2019.11.048  0.316
2020 Chen L, Li Y, Zhao G, Zhang C, Gao F. Multi-objective optimization and experimental investigation on hot extruded plate of high strength Al-Zn-Mg alloy Journal of Materials Research and Technology. 9: 507-519. DOI: 10.1016/J.Jmrt.2019.10.080  0.377
2020 Li Y, Zhai W, Wang Z, Li X, Sun L, Li J, Zhao G. Investigation on the material flow and deformation behavior during ultrasonic-assisted incremental forming of straight grooves Journal of Materials Research and Technology. 9: 433-454. DOI: 10.1016/J.Jmrt.2019.10.072  0.343
2020 Zhang C, Liu M, Meng Z, Zhang Q, Zhao G, Chen L, Zhang H, Wang J. Microstructure evolution and precipitation characteristics of spray-formed and subsequently extruded 2195 Al-Li alloy plate during solution and aging process Journal of Materials Processing Technology. 283: 116718. DOI: 10.1016/J.Jmatprotec.2020.116718  0.354
2020 Chen X, Zhao G, Liu G, Sun L, Chen L, Zhang C. Microstructure evolution and mechanical properties of 2196 Al-Li alloy in hot extrusion process Journal of Materials Processing Technology. 275: 116348. DOI: 10.1016/J.Jmatprotec.2019.116348  0.398
2020 Tang J, Chen L, Zhao G, Zhang C, Sun L. Achieving three-layered Al/Mg/Al sheet via combining porthole die co-extrusion and hot forging Journal of Magnesium and Alloys. 8: 654-666. DOI: 10.1016/J.Jma.2020.02.016  0.314
2020 Li Z, Chen L, Tang J, Zhao G, Zhang C. Response of mechanical properties and corrosion behavior of Al–Zn–Mg alloy treated by aging and annealing: A comparative study Journal of Alloys and Compounds. 848: 156561. DOI: 10.1016/J.Jallcom.2020.156561  0.344
2020 Xu Z, Zhang C, Wang K, Zhang K, Zhao G, Chen L. Crystal plasticity prediction of texture evolution during helical extrusion process of aluminium alloys under three-dimensional deformation path Journal of Alloys and Compounds. 830: 154598. DOI: 10.1016/J.Jallcom.2020.154598  0.36
2020 Liang M, Chen L, Zhao G, Guo Y. Effects of solution treatment on the microstructure and mechanical properties of naturally aged EN AW 2024 Al alloy sheet Journal of Alloys and Compounds. 824: 153943. DOI: 10.1016/J.Jallcom.2020.153943  0.339
2020 Lu B, Jian N, Qu K, Hu F, Liu X, Xu J, Zhao G. Stepwise enhancement on optoelectronic performances of polyselenophene via electropolymerization of mono-, bi-, and tri-selenophene Electrochimica Acta. 340: 135974. DOI: 10.1016/J.Electacta.2020.135974  0.634
2020 Ge C, Wang G, Li X, Chai J, Li B, Wan G, Zhao G, Wang G. Large cyclic deformability of microcellular TPU/MWCNT composite film with conductive stability, and electromagnetic interference shielding and self-cleaning performance Composites Science and Technology. 197: 108247. DOI: 10.1016/J.Compscitech.2020.108247  0.361
2020 Wang G, Zhao J, Wang G, Zhao H, Lin J, Zhao G, Park CB. Strong and super thermally insulating in-situ nanofibrillar PLA/PET composite foam fabricated by high-pressure microcellular injection molding Chemical Engineering Journal. 390: 124520. DOI: 10.1016/J.Cej.2020.124520  0.349
2020 Wang X, Yu J, Liu J, Chen L, Yang Q, Wei H, Sun J, Wang Z, Zhang Z, Zhao G, Van Humbeeck J. Effect of process parameters on the phase transformation behavior and tensile properties of NiTi shape memory alloys fabricated by selective laser melting Additive Manufacturing. 36: 101545. DOI: 10.1016/J.Addma.2020.101545  0.37
2020 Zheng C, Pan C, Wang J, Zhao G, Ji Z. Mechanical joining behavior of Cu–Fe dissimilar metallic foils in laser shock clinching The International Journal of Advanced Manufacturing Technology. 110: 1001-1014. DOI: 10.1007/S00170-020-05920-8  0.314
2020 Zheng C, Zhang Y, Zhao G, Ji Z, Sun Y. Influence of process parameters on forming quality of Cu-Fe joints by laser shock hole-clinching The International Journal of Advanced Manufacturing Technology. 110: 887-898. DOI: 10.1007/S00170-020-05915-5  0.324
2019 Wang J, Chai J, Wang G, Zhao J, Zhang D, Li B, Zhao H, Zhao G. Strong and thermally insulating polylactic acid/glass fiber composite foam fabricated by supercritical carbon dioxide foaming. International Journal of Biological Macromolecules. PMID 31306706 DOI: 10.1016/J.Ijbiomac.2019.07.071  0.343
2019 Wang G, Zhang D, Li B, Wan G, Zhao G, Zhang A. Strong and thermal-resistance glass fiber-reinforced polylactic acid (PLA) composites enabled by heat treatment. International Journal of Biological Macromolecules. PMID 30731162 DOI: 10.1016/J.Ijbiomac.2019.02.020  0.347
2019 Chen L, Li Y, Tang J, Zhao G, Zhang C. Investigation on microstructure and mechanical properties of Al–5.50Zn–2.35Mg–1.36Cu alloy fabricated by hot extrusion process Journal of Materials Research. 34: 3151-3162. DOI: 10.1557/Jmr.2019.268  0.374
2019 Mu Y, Chen A, Zhao G, Cui Y, Feng J, Ren F. Prediction for the mechanical property of short fiber-reinforced polymer composites through process modeling method: Journal of Thermoplastic Composite Materials. 32: 1525-1546. DOI: 10.1177/0892705718799815  0.315
2019 Dong G, Zhao G, Hou J, Wang G, Mu Y. Effects of dynamic mold temperature control on melt pressure, cellular structure, and mechanical properties of microcellular injection-molded parts: An experimental study: Cellular Polymers. 38: 111-130. DOI: 10.1177/0262489319871741  0.322
2019 Xu X, Zhao G, Wang Y, Chen X, Zhang C. Microstructural evolution and its effect on mechanical properties of spray deposited 2195 alloy during porthole die extrusion process Vacuum. 167: 28-39. DOI: 10.1016/J.Vacuum.2019.05.032  0.37
2019 Zhang C, Wen M, Zhao G, Chen L, Sun W, Bai K. One-time determination of 20 material parameters in a strain-compensated constitutive model and its application in extrusion for an Al-Zn-Mg thin-walled profile Thin-Walled Structures. 135: 65-77. DOI: 10.1016/J.Tws.2018.10.034  0.375
2019 Wang G, Wan G, Chai J, Li B, Zhao G, Mu Y, Park CB. Structure-tunable thermoplastic polyurethane foams fabricated by supercritical carbon dioxide foaming and their compressive mechanical properties Journal of Supercritical Fluids. 149: 127-137. DOI: 10.1016/J.Supflu.2019.04.004  0.339
2019 Hou J, Zhao G, Wang G, Zhang L, Dong G, Li B. Ultra-high expansion linear polypropylene foams prepared in a semi-molten state under supercritical CO2 Journal of Supercritical Fluids. 145: 140-150. DOI: 10.1016/J.Supflu.2018.11.017  0.351
2019 Li S, Chen L, Tang J, Zhao G, Zhang C. Microstructure and mechanical properties of hot extruded Mg-8.89Li-0.96Zn alloy Results in Physics. 13: 102148. DOI: 10.1016/J.Rinp.2019.02.084  0.402
2019 Chen L, Sun W, Lin J, Zhao G, Wang G. Modelling of constitutive relationship, dynamic recrystallization and grain size of 40Cr steel during hot deformation process Results in Physics. 12: 784-792. DOI: 10.1016/J.Rinp.2018.12.046  0.375
2019 Wang G, Zhang D, Wan G, Li B, Zhao G. Glass fiber reinforced PLA composite with enhanced mechanical properties, thermal behavior, and foaming ability Polymer. 181: 121803. DOI: 10.1016/J.Polymer.2019.121803  0.355
2019 Zhang Q, Zhang C, Lin J, Zhao G, Chen L, Zhang H. Microstructure analysis and low-cycle fatigue behavior of spray-formed Al–Li alloy 2195 extruded plate Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 742: 773-787. DOI: 10.1016/J.Msea.2018.11.053  0.343
2019 Chen L, Li S, Chu X, Zhao G, Gao J. Grain refinement and strength enhancing of hot extruded Mg alloy by application of electric pulse Materials Letters. 241: 104-107. DOI: 10.1016/J.Matlet.2019.01.047  0.344
2019 Chen L, Chen G, Tang J, Zhao G, Zhang C. Evolution of grain structure, micro-texture and second phase during porthole die extrusion of Al–Zn–Mg alloy Materials Characterization. 158: 109953. DOI: 10.1016/J.Matchar.2019.109953  0.382
2019 Lu X, Zhao G, Xi H, Zhang C, Chen L, Sun L. Microstructure, mechanical properties and welding quality evaluation of longitudinal welds in hollow magnesium alloy profiles extruded at different ram speeds Materials Characterization. 151: 414-428. DOI: 10.1016/J.Matchar.2019.03.030  0.356
2019 Wang Y, Zhao G, Chen X, Xu X, Chen L, Zhang C. Effect of inter-annealing between two stages of extrusion on the microstructure and mechanical property for spray deposited Al–Cu–Li alloy 2195 Journal of Materials Research and Technology. 8: 3891-3907. DOI: 10.1016/J.Jmrt.2019.06.052  0.41
2019 Zhang C, Wang C, Zhang Q, Zhao G, Chen L. Influence of extrusion parameters on microstructure, texture, and second-phase particles in an Al-Mg-Si alloy Journal of Materials Processing Technology. 270: 323-334. DOI: 10.1016/J.Jmatprotec.2019.03.014  0.387
2019 Yu J, Zhao G, Zhao X, Chen L, Chen M. Microstructures of longitudinal/transverse welds and back-end defects and their influences on the corrosion resistance and mechanical properties of aluminum alloy extrusion profiles Journal of Materials Processing Technology. 267: 1-16. DOI: 10.1016/J.Jmatprotec.2018.12.006  0.361
2019 Yu J, Zhao G, Cui W, Chen L, Chen X. Evaluating the welding quality of longitudinal welds in a hollow profile manufactured by porthole die extrusion: Experiments and simulation Journal of Manufacturing Processes. 38: 502-515. DOI: 10.1016/J.Jmapro.2019.01.044  0.35
2019 Chai J, Wang G, Li B, Wan G, Zhang L, Zhao G. Strong and ductile poly (lactic acid) achieved by carbon dioxide treatment at room temperature Journal of Co 2 Utilization. 33: 292-302. DOI: 10.1016/J.Jcou.2019.06.006  0.343
2019 Tang J, Chen L, Zhao G, Zhang C, Yu J. Study on Al/Mg/Al sheet fabricated by combination of porthole die co-extrusion and subsequent hot rolling Journal of Alloys and Compounds. 784: 727-738. DOI: 10.1016/J.Jallcom.2019.01.005  0.306
2019 Wang Y, Zhao G, Xu X, Chen X, Zhang C. Constitutive modeling, processing map establishment and microstructure analysis of spray deposited Al-Cu-Li alloy 2195 Journal of Alloys and Compounds. 779: 735-751. DOI: 10.1016/J.Jallcom.2018.11.289  0.377
2019 Zhang C, Wang C, Guo R, Zhao G, Chen L, Sun W, Wang X. Investigation of dynamic recrystallization and modeling of microstructure evolution of an Al-Mg-Si aluminum alloy during high-temperature deformation Journal of Alloys and Compounds. 773: 59-70. DOI: 10.1016/J.Jallcom.2018.09.263  0.373
2019 Zhao J, Wang G, Zhang L, Li B, Wang C, Zhao G, Park CB. Lightweight and strong fibrillary PTFE reinforced polypropylene composite foams fabricated by foam injection molding European Polymer Journal. 119: 22-31. DOI: 10.1016/J.Eurpolymj.2019.07.016  0.358
2019 Mu Y, Chen A, Zhao G, Cui Y, Feng J, Ren F. Finite element simulation of three-dimensional viscoelastic flow at high Weissenberg number based on the log-conformation formulation Mechanics of Time-Dependent Materials. 23: 477-495. DOI: 10.1007/S11043-018-9401-4  0.326
2019 Yuan S, Chen L, Tang J, Zhao G, Zhang C, Yu J. Correlation between homogenization treatment and subsequent hot extrusion of Al–Mg–Si alloy Journal of Materials Science. 54: 9843-9856. DOI: 10.1007/S10853-019-03570-0  0.374
2019 Zhang W, Zhao G, Fu Q. Optimization of roll forming process for high-strength V channel steels The International Journal of Advanced Manufacturing Technology. 105: 2469-2480. DOI: 10.1007/S00170-019-04462-Y  0.347
2019 Yu J, Zhao G, Chen X, Liang M. A comparative study on hot deformation and solid-state bonding behavior of aluminum alloys for the integration of solid-state joining and forming processes The International Journal of Advanced Manufacturing Technology. 104: 3849-3866. DOI: 10.1007/S00170-019-04153-8  0.363
2019 Mu Y, Li N, Hang L, Zhao G, Gao J, Niu Z. Investigation of the Rheological Behaviors of Polymeric Materials in the Film Casting Process through Multiscale Modeling and Simulation Method Macromolecular Theory and Simulations. 28: 1900001. DOI: 10.1002/Mats.201900001  0.33
2018 Lu X, Zhao G, Zhou J, Zhang C, Yu J. Microstructure and Mechanical Properties of the As-Cast and As-Homogenized Mg-Zn-Sn-Mn-Ca Alloy Fabricated by Semicontinuous Casting. Materials (Basel, Switzerland). 11. PMID 29710818 DOI: 10.3390/Ma11050703  0.369
2018 Wang G, Zhao G, Dong G, Song L, Park CB. Lightweight, thermally insulating, and low dielectric microcellular high-impact polystyrene (HIPS) foams fabricated by high-pressure foam injection molding with mold opening Journal of Materials Chemistry C. 6: 12294-12305. DOI: 10.1039/C8Tc04248A  0.344
2018 Wang G, Zhao G, Wang S, Zhang L, Park CB. Injection-molded microcellular PLA/graphite nanocomposites with dramatically enhanced mechanical and electrical properties for ultra-efficient EMI shielding applications Journal of Materials Chemistry C. 6: 6847-6859. DOI: 10.1039/C8Tc01326H  0.374
2018 Hou J, Zhao G, Zhang L, Dong G, Wang G. Foaming Mechanism of Polypropylene in Gas-Assisted Microcellular Injection Molding Industrial & Engineering Chemistry Research. 57: 4710-4720. DOI: 10.1021/Acs.Iecr.7B05389  0.326
2018 Dong G, Zhao G, Zhang L, Hou J, Li B, Wang G. Morphology Evolution and Elimination Mechanism of Bubble Marks on Surface of Microcellular Injection-Molded Parts with Dynamic Mold Temperature Control Industrial & Engineering Chemistry Research. DOI: 10.1021/Acs.Iecr.7B04199  0.332
2018 Lu X, Zhao G, Zhou J, Zhang C, Sun L. Effect of extrusion speeds on the microstructure, texture and mechanical properties of high-speed extrudable MgZnSnMnCa alloy Vacuum. 157: 180-191. DOI: 10.1016/J.Vacuum.2018.08.041  0.376
2018 Chen L, Liang M, Zhao G, Zhou J, Zhang C. Microstructure evolution of AZ91 alloy during hot extrusion process with various ram velocity Vacuum. 150: 136-143. DOI: 10.1016/J.Vacuum.2018.01.036  0.367
2018 Li B, Zhao G, Wang G, Zhang L, Gong J. Fabrication of high-expansion microcellular PLA foams based on pre-isothermal cold crystallization and supercritical CO2 foaming Polymer Degradation and Stability. 156: 75-88. DOI: 10.1016/J.Polymdegradstab.2018.08.009  0.347
2018 Zhang W, Zhao G, Fu Q. Study on the effects and mechanisms of induction heat treatment cycles on toughness of high frequency welded pipe welds Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 736: 276-287. DOI: 10.1016/J.Msea.2018.09.004  0.358
2018 Wang Y, Zhao G, Xu X, Chen X, Zhang W. Microstructures and mechanical properties of spray deposited 2195 Al-Cu-Li alloy through thermo-mechanical processing Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 727: 78-89. DOI: 10.1016/J.Msea.2018.04.116  0.362
2018 Chen L, Zhang J, Zhao G, Wang Z, Zhang C. Microstructure and mechanical properties of Mg-Al-Zn alloy extruded by porthole die with different initial billets Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 718: 390-397. DOI: 10.1016/J.Msea.2018.01.129  0.389
2018 Wu H, Zhao G, Wang G, Zhang W, Li Y. A new core-back foam injection molding method with chemical blowing agents Materials & Design. 144: 331-342. DOI: 10.1016/J.Matdes.2018.02.043  0.347
2018 Yu J, Zhao G. Interfacial structure and bonding mechanism of weld seams during porthole die extrusion of aluminum alloy profiles Materials Characterization. 138: 56-66. DOI: 10.1016/J.Matchar.2018.01.052  0.338
2018 Chen L, Zhang J, Tang J, Chen G, Zhao G, Zhang C. Microstructure and texture evolution during porthole die extrusion of Mg-Al-Zn alloy Journal of Materials Processing Technology. 259: 346-352. DOI: 10.1016/J.Jmatprotec.2018.05.003  0.36
2018 Tang J, Chen L, Fan X, Zhao G, Zhang C. Co-extrusion of dissimilar AA6063/AA7075 by porthole die at various temperatures Journal of Alloys and Compounds. 764: 162-169. DOI: 10.1016/J.Jallcom.2018.06.068  0.358
2018 Li Y, Chen L, Tang J, Zhao G, Zhang C. Effects of asymmetric feeder on microstructure and mechanical properties of high strength Al-Zn-Mg alloy by hot extrusion Journal of Alloys and Compounds. 749: 293-304. DOI: 10.1016/J.Jallcom.2018.03.188  0.396
2018 Lu X, Zhao G, Zhou J, Zhang C, Chen L, Tang S. Microstructure and mechanical properties of Mg-3.0Zn-1.0Sn-0.3Mn-0.3Ca alloy extruded at different temperatures Journal of Alloys and Compounds. 732: 257-269. DOI: 10.1016/J.Jallcom.2017.10.210  0.37
2018 Wang G, Hui Y, Zhang L, Zhao G. Research on temperature and pressure responses in the rapid mold heating and cooling method based on annular cooling channels and electric heating International Journal of Heat and Mass Transfer. 116: 1192-1203. DOI: 10.1016/J.Ijheatmasstransfer.2017.09.126  0.304
2018 Wang G, Zhao G, Dong G, Mu Y, Park CB, Wang G. Lightweight, super-elastic, and thermal-sound insulation bio-based PEBA foams fabricated by high-pressure foam injection molding with mold-opening European Polymer Journal. 103: 68-79. DOI: 10.1016/J.Eurpolymj.2018.04.002  0.354
2018 Lin J, Li J, Guan Y, Zhao G, Naceur H, Coutellier D. Geometrically nonlinear bending analysis of functionally graded beam with variable thickness by a meshless method Composite Structures. 189: 239-246. DOI: 10.1016/J.Compstruct.2018.01.063  0.309
2018 Wang G, Zhao G, Dong G, Mu Y, Park CB. Lightweight and strong microcellular injection molded PP/talc nanocomposite Composites Science and Technology. 168: 38-46. DOI: 10.1016/J.Compscitech.2018.09.009  0.375
2018 Li J, Guan Y, Wang G, Zhao G, Lin J, Naceur H, Coutellier D. Meshless modeling of bending behavior of bi-directional functionally graded beam structures Composites Part B-Engineering. 155: 104-111. DOI: 10.1016/J.Compositesb.2018.08.029  0.315
2018 Wang G, Zhao G, Zhang L, Mu Y, Park CB. Lightweight and tough nanocellular PP/PTFE nanocomposite foams with defect-free surfaces obtained using in situ nanofibrillation and nanocellular injection molding Chemical Engineering Journal. 350: 1-11. DOI: 10.1016/J.Cej.2018.05.161  0.381
2018 Zhang W, Zhao G, Zhai Z, Zhao C, Fu Q. Calculation method of spatial configuration of tube billet in roll forming process of a high strength steel drive shaft tube The International Journal of Advanced Manufacturing Technology. 97: 3339-3358. DOI: 10.1007/S00170-018-2209-1  0.313
2018 Sun W, Chen L, Zhang T, Zhang K, Zhao G, Wang G. Preform optimization and microstructure analysis on hot precision forging process of a half axle flange The International Journal of Advanced Manufacturing Technology. 95: 2157-2167. DOI: 10.1007/S00170-017-1377-8  0.387
2018 Wang D, Zhang C, Wang C, Zhao G, Chen L, Sun W. Application and analysis of spread die and flat container in the extrusion of a large-size, hollow, and flat-wide aluminum alloy profile The International Journal of Advanced Manufacturing Technology. 94: 4247-4263. DOI: 10.1007/S00170-017-1127-Y  0.412
2017 Wang G, Wang L, Mark LH, Shaayegan V, Wang G, Li H, Zhao G, Park CB. Ultra-low threshold and lightweight biodegradable porous PLA/MWCNT with segregated conductive networks for high-performance thermal insulation and electromagnetic interference shielding applications. Acs Applied Materials & Interfaces. PMID 29206437 DOI: 10.1021/Acsami.7B14111  0.324
2017 Wang G, Wang C, Zhao J, Wang G, Park CB, Zhao G. Modelling of thermal transport through a nanocellular polymer foam: toward the generation of a new superinsulating material. Nanoscale. PMID 28440837 DOI: 10.1039/C7Nr00327G  0.324
2017 Zhang A, Zhao G, Hui Y, Guan Y. Mechanical and Thermal Properties of ABS/PMMA/Potassium Titanate Whisker Composites Polymer-Plastics Technology and Engineering. 56: 382-390. DOI: 10.1080/03602559.2016.1211698  0.322
2017 Li Y, Chen X, Sun J, Li J, Zhao G. Effects of ultrasonic vibration on deformation mechanism of incremental point-forming process Procedia Engineering. 207: 777-782. DOI: 10.1016/J.Proeng.2017.10.828  0.353
2017 Yu J, Zhao G. Study on the welding quality in the porthole die extrusion process of aluminum alloy profiles Procedia Engineering. 207: 401-406. DOI: 10.1016/J.Proeng.2017.10.795  0.372
2017 Zhang C, Dong Y, Zhao G, Chen L. Experimental and numerical investigations on transverse weld of hollow aluminum profile during porthole extrusion process Procedia Engineering. 207: 1653-1658. DOI: 10.1016/J.Proeng.2017.10.1095  0.4
2017 Wang G, Zhao J, Yu K, Mark LH, Wang G, Gong P, Park CB, Zhao G. Role of elastic strain energy in cell nucleation of polymer foaming and its application for fabricating sub-microcellular TPU microfilms Polymer. 119: 28-39. DOI: 10.1016/J.Polymer.2017.05.016  0.318
2017 Yu J, Zhao G, Zhang C, Chen L. Dynamic evolution of grain structure and micro-texture along a welding path of aluminum alloy profiles extruded by porthole dies Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 682: 679-690. DOI: 10.1016/J.Msea.2016.11.089  0.361
2017 Hou J, Zhao G, Wang G, Dong G, Xu J. A novel gas-assisted microcellular injection molding method for preparing lightweight foams with superior surface appearance and enhanced mechanical performance Materials & Design. 127: 115-125. DOI: 10.1016/J.Matdes.2017.04.073  0.329
2017 Fan X, Chen L, Chen G, Zhao G, Zhang C. Joining of 1060/6063 aluminum alloys based on porthole die extrusion process Journal of Materials Processing Technology. 250: 65-72. DOI: 10.1016/J.Jmatprotec.2017.07.009  0.349
2017 Zhang C, Dong Y, Wang C, Zhao G, Chen L, Sun W. Evolution of transverse weld during porthole extrusion of AA7N01 hollow profile Journal of Materials Processing Technology. 248: 103-114. DOI: 10.1016/J.Jmatprotec.2017.05.017  0.365
2017 Yu J, Zhao G, Cui W, Zhang C, Chen L. Microstructural evolution and mechanical properties of welding seams in aluminum alloy profiles extruded by a porthole die under different billet heating temperatures and extrusion speeds Journal of Materials Processing Technology. 247: 214-222. DOI: 10.1016/J.Jmatprotec.2017.04.030  0.404
2017 Chen G, Chen L, Zhao G, Zhang C. Microstructure evolution during solution treatment of extruded Al-Zn-Mg profile containing a longitudinal weld seam Journal of Alloys and Compounds. 729: 210-221. DOI: 10.1016/J.Jallcom.2017.09.143  0.32
2017 Chen G, Chen L, Zhao G, Zhang C, Cui W. Microstructure analysis of an Al-Zn-Mg alloy during porthole die extrusion based on modeling of constitutive equation and dynamic recrystallization Journal of Alloys and Compounds. 710: 80-91. DOI: 10.1016/J.Jallcom.2017.03.240  0.393
2017 Zhang L, Zhao G, Wang G, Dong G, Wu H. Investigation on bubble morphological evolution and plastic part surface quality of microcellular injection molding process based on a multiphase-solid coupled heat transfer model International Journal of Heat and Mass Transfer. 104: 1246-1258. DOI: 10.1016/J.Ijheatmasstransfer.2016.09.043  0.389
2017 Wang G, Zhao J, Wang G, Mark LH, Park CB, Zhao G. Low-density and structure-tunable microcellular PMMA foams with improved thermal-insulation and compressive mechanical properties European Polymer Journal. 95: 382-393. DOI: 10.1016/J.Eurpolymj.2017.08.025  0.36
2017 Wang G, Zhao J, Mark LH, Wang G, Yu K, Wang C, Park CB, Zhao G. Ultra-tough and super thermal-insulation nanocellular PMMA/TPU Chemical Engineering Journal. 325: 632-646. DOI: 10.1016/J.Cej.2017.05.116  0.36
2017 Zhang L, Zhao G, Wang G. Formation mechanism of porous structure in plastic parts injected by microcellular injection molding technology with variable mold temperature Applied Thermal Engineering. 114: 484-497. DOI: 10.1016/J.Applthermaleng.2016.11.180  0.399
2017 Zhang J, Chen L, Zhao G, Zhang C, Zhou J. Study on solid bonding behavior of AZ31 Mg alloy during porthole die extrusion process The International Journal of Advanced Manufacturing Technology. 93: 2791-2799. DOI: 10.1007/S00170-017-0722-2  0.391
2017 Li Y, Chen X, Liu Z, Sun J, Li F, Li J, Zhao G. A review on the recent development of incremental sheet-forming process The International Journal of Advanced Manufacturing Technology. 92: 2439-2462. DOI: 10.1007/S00170-017-0251-Z  0.303
2017 Zhang C, Yang S, Zhang Q, Zhao G, Lu P, Sun W. Automatic optimization design of a feeder extrusion die with response surface methodology and mesh deformation technique The International Journal of Advanced Manufacturing Technology. 91: 3181-3193. DOI: 10.1007/S00170-017-0018-6  0.365
2017 Chen G, Chen L, Zhao G, Lu B. Investigation on longitudinal weld seams during porthole die extrusion process of high strength 7075 aluminum alloy The International Journal of Advanced Manufacturing Technology. 91: 1897-1907. DOI: 10.1007/S00170-016-9902-8  0.373
2017 Mu Y, Hang L, Chen A, Zhao G, Xu D. Influence of die geometric structure on flow balance in complex hollow plastic profile extrusion The International Journal of Advanced Manufacturing Technology. 91: 1275-1287. DOI: 10.1007/S00170-016-9790-Y  0.358
2017 Liu J, Zhang S, Zhao G, Wang G. Numerical and experimental investigations on polymer melt flow phenomenon in a vario‐thermal mold cavity Journal of Applied Polymer Science. 134: 45193. DOI: 10.1002/App.45193  0.364
2016 Li S, Zhao G, Dong G, Wang J. Study on reducing sink mark depth of a microcellular injection molded part with many reinforcing ribs Journal of Cellular Plastics. 52: 479-502. DOI: 10.1177/0021955X15579244  0.359
2016 Wang J, Zhao G, Li M. Establishment of processing map and analysis of microstructure on multi-crystalline tungsten plastic deformation process at elevated temperature Materials and Design. 103: 268-277. DOI: 10.1016/J.Matdes.2016.04.055  0.37
2016 Dong Y, Zhang C, Zhao G, Guan Y, Gao A, Sun W. Constitutive equation and processing maps of an Al-Mg-Si aluminum alloy: Determination and application in simulating extrusion process of complex profiles Materials and Design. 92: 983-997. DOI: 10.1016/J.Matdes.2015.12.113  0.387
2016 Wang J, Zhao G, Chen L, Li J. A comparative study of several constitutive models for powder metallurgy tungsten at elevated temperature Materials & Design. 90: 91-100. DOI: 10.1016/J.Matdes.2015.10.114  0.354
2016 Yu J, Zhao G, Chen L. Analysis of longitudinal weld seam defects and investigation of solid-state bonding criteria in porthole die extrusion process of aluminum alloy profiles Journal of Materials Processing Technology. 237: 31-47. DOI: 10.1016/J.Jmatprotec.2016.05.024  0.404
2016 Yu J, Zhao G, Chen L. Investigation of interface evolution, microstructure and mechanical properties of solid-state bonding seams in hot extrusion process of aluminum alloy profiles Journal of Materials Processing Technology. 230: 153-166. DOI: 10.1016/J.Jmatprotec.2015.11.020  0.393
2016 Huang L, Zhao G, Wang Z, Zhang X. Adaptive hexahedral mesh generation and regeneration using an improved grid-based method Advances in Engineering Software. 102: 49-70. DOI: 10.1016/J.Advengsoft.2016.09.004  0.3
2016 Dong Y, Zhang C, Lu X, Wang C, Zhao G. Constitutive Equations and Flow Behavior of an As-Extruded AZ31 Magnesium Alloy Under Large Strain Condition Journal of Materials Engineering and Performance. 1-15. DOI: 10.1007/S11665-016-2092-6  0.342
2016 Dong Y, Zhang C, Luo W, Yang S, Zhao G. Material flow analysis and extrusion die modifications for an irregular and multitooth aluminum alloy radiator International Journal of Advanced Manufacturing Technology. 1-9. DOI: 10.1007/S00170-016-8666-5  0.329
2016 Zhang C, Yang S, Wang C, Zhao G, Gao A, Wang L. Numerical and experimental investigation on thermo-mechanical behavior during transient extrusion process of high-strength 7 × × × aluminum alloy profile International Journal of Advanced Manufacturing Technology. 1-12. DOI: 10.1007/S00170-016-8595-3  0.439
2016 Zhang C, Chen H, Zhao G, Zhang L, Lou S. Optimization of porthole extrusion dies with the developed algorithm based on finite volume method International Journal of Advanced Manufacturing Technology. 1-13. DOI: 10.1007/S00170-016-8522-7  0.371
2016 Zhao H, Yan X, Zhao G, Guo Z. Microcellular injection molded polylactic acid/poly (ε‐caprolactone) blends with supercritical CO2: Correlation between rheological properties and their foaming behavior Polymer Engineering and Science. 56: 939-946. DOI: 10.1002/Pen.24323  0.347
2015 Lu B, Zhen S, Ming S, Xu J, Zhao G. Effect of electrolytes on the electropolymerization and optoelectronic properties of poly(3-methylselenophene) Rsc Advances. 5: 70649-70660. DOI: 10.1039/C5Ra11849B  0.634
2015 Zhang L, Zhao G, Dong G, Li S, Wang G. Bubble morphological evolution and surface defect formation mechanism in the microcellular foam injection molding process Rsc Advances. 5: 70032-70050. DOI: 10.1039/C5Ra07512B  0.372
2015 Zhao H, Zhao G, Turng LS, Peng X. Enhancing Nanofiller Dispersion Through Prefoaming and Its Effect on the Microstructure of Microcellular Injection Molded Polylactic Acid/Clay Nanocomposites Industrial and Engineering Chemistry Research. 54: 7122-7130. DOI: 10.1021/Acs.Iecr.5B01130  0.337
2015 Chen L, Zhao G, Yu J. Hot deformation behavior and constitutive modeling of homogenized 6026 aluminum alloy Materials & Design. 74: 25-35. DOI: 10.1016/J.Matdes.2015.02.024  0.364
2015 Zhang C, Chu X, Guines D, Leotoing L, Ding J, Zhao G. Dedicated linear – Voce model and its application in investigating temperature and strain rate effects on sheet formability of aluminum alloys Materials & Design. 67: 522-530. DOI: 10.1016/J.Matdes.2014.10.074  0.354
2015 Chen L, Zhao G, Yu J, Zhang W. Constitutive analysis of homogenized 7005 aluminum alloy at evaluated temperature for extrusion process Materials & Design. 66: 129-136. DOI: 10.1016/J.Matdes.2014.10.045  0.39
2015 Zhang C, Ding J, Dong Y, Zhao G, Gao A, Wang L. Identification of friction coefficients and strain-compensated Arrhenius-type constitutive model by a two-stage inverse analysis technique International Journal of Mechanical Sciences. 98: 195-204. DOI: 10.1016/J.Ijmecsci.2015.04.015  0.339
2015 Mu Y, Zhao G, Wu X, Hang L, Chu H. Continuous modeling and simulation of flow-swell-crystallization behaviors of viscoelastic polymer melts in the hollow profile extrusion process Applied Mathematical Modelling. 39: 1352-1368. DOI: 10.1016/J.Apm.2014.09.008  0.369
2015 Chen L, Zhao G, Yu J, Zhang W. Evaluation of a pyramid die extrusion for a hollow aluminum profile using FE simulation Journal of Mechanical Science and Technology. 29: 2195-2203. DOI: 10.1007/S12206-015-0440-3  0.381
2015 Chen L, Zhao G, Gong J, Chen X, Chen M. Hot Deformation Behaviors and Processing Maps of 2024 Aluminum Alloy in As-cast and Homogenized States Journal of Materials Engineering and Performance. DOI: 10.1007/S11665-015-1734-4  0.354
2015 Wang W, Zhao G, Guan Y, Wu X, Hui Y. Effect of rapid heating cycle injection mold temperature on crystal structures, morphology of polypropylene and surface quality of plastic parts Journal of Polymer Research. 22. DOI: 10.1007/S10965-015-0731-5  0.326
2015 Chen L, Zhao G, Yu J. Effects of ram velocity on pyramid die extrusion of hollow aluminum profile The International Journal of Advanced Manufacturing Technology. 79: 2117-2125. DOI: 10.1007/S00170-015-7059-5  0.368
2015 Guan Y, Bai X, Liu M, Song L, Zhao G. Preform design in forging process of complex parts by using quasi-equipotential field and response surface methods International Journal of Advanced Manufacturing Technology. 79: 21-29. DOI: 10.1007/S00170-014-6775-6  0.302
2015 Zhang C, Zhao G, Guan Y, Gao A, Wang L, Li P. Virtual tryout and optimization of the extrusion die for an aluminum profile with complex cross-sections The International Journal of Advanced Manufacturing Technology. 78: 927-937. DOI: 10.1007/S00170-014-6691-9  0.376
2015 Wang GL, Zhao GQ, Wang JC, Zhang L. Research on formation mechanisms and control of external and inner bubble morphology in microcellular injection molding Polymer Engineering and Science. 55: 807-835. DOI: 10.1002/Pen.23948  0.365
2015 Zhao H, Zhao G, Turng LS, Peng X. Structural evolution of uniaxial tensile-deformed injection molded poly(e{open}-caprolactone)/hydroxyapatite composites Polymer Composites. DOI: 10.1002/Pc.23747  0.346
2015 Wang W, Zhao G, Wu X, Li X, Wang C. Investigation on phosphorus halogen‐free flame‐retardancy systems in short glass fiber‐reinforced PC/ABS composites under rapid thermal cycle molding process condition Polymer Composites. 36: 1653-1663. DOI: 10.1002/Pc.23075  0.309
2015 Wang W, Zhao G, Wu X, Zhai Z. The effect of high temperature annealing process on crystallization process of polypropylene, mechanical properties, and surface quality of plastic parts Journal of Applied Polymer Science. 132. DOI: 10.1002/App.42773  0.374
2015 Zhang A, Zhao G, Guan Y. Effects of mold cavity temperature on surface quality and mechanical properties of nanoparticle‐filled polymer in rapid heat cycle molding Journal of Applied Polymer Science. 132. DOI: 10.1002/App.41420  0.387
2014 Meng W, Zhao G, Guan Y. The effects of forming parameters on conical ring rolling process. Thescientificworldjournal. 2014: 235656. PMID 25202716 DOI: 10.1155/2014/235656  0.343
2014 Meng W, Zhao G, Guan Y. A Mandrel Feeding Strategy in Conical Ring Rolling Process Mathematical Problems in Engineering. 2014: 1-13. DOI: 10.1155/2014/364274  0.322
2014 Lu B, Zhen S, Zhang S, Xu J, Zhao G. Highly stable hybrid selenophene-3,4-ethylenedioxythiophene as electrically conducting and electrochromic polymers Polymer Chemistry. 5: 4896-4908. DOI: 10.1039/C4Py00529E  0.627
2014 Zhang C, Chu X, Guines D, Leotoing L, Ding J, Zhao G. Effects of Temperature and Strain Rate on the Forming Limit Curves of AA5086 Sheet Procedia Engineering. 81: 772-778. DOI: 10.1016/J.Proeng.2014.10.075  0.376
2014 Guan Y, Bai X, Liu M, Song L, Zhao G. 3D Preform Design in Forging Process based on Quasi-quipotential Field and Response Surface Methods Procedia Engineering. 81: 468-473. DOI: 10.1016/J.Proeng.2014.10.024  0.303
2014 Meng W, Zhao GQ. Effects of key simulation parameters on conical ring rolling process Procedia Engineering. 81: 286-291. DOI: 10.1016/J.Proeng.2014.09.165  0.309
2014 Wang Gl, Zhao Gq, Wang Xx. Heating/cooling channels design for an automotive interior part and its evaluation in rapid heat cycle molding Materials and Design. 59: 310-322. DOI: 10.1016/J.Matdes.2014.02.047  0.324
2014 Wang G, Zhao G, Wang X. Development and evaluation of a new rapid mold heating and cooling method for rapid heat cycle molding International Journal of Heat and Mass Transfer. 78: 99-111. DOI: 10.1016/J.Ijheatmasstransfer.2014.06.062  0.343
2014 Mu Y, Zhao G, Chen A, Dong G, Li S. Numerical investigation of the crystallization and orientation behavior in polymer processing with a two-phase model Computers & Chemical Engineering. 63: 91-107. DOI: 10.1016/J.Compchemeng.2013.12.010  0.362
2014 Mu Y, Zhao G, Chen A, Dong G, Li S. Finite element simulation of three-dimensional viscoelastic planar contraction flow with multi-mode FENE-P constitutive model Polymer Bulletin. 71: 3131-3150. DOI: 10.1007/S00289-014-1241-Z  0.314
2014 Chen L, Zhao G, Yu J, Zhang W, Wu T. Analysis and porthole die design for a multi-hole extrusion process of a hollow, thin-walled aluminum profile The International Journal of Advanced Manufacturing Technology. 74: 383-392. DOI: 10.1007/S00170-014-6003-4  0.384
2014 Zhao G, Chen H, Zhang C, Guan Y, Anjiang G, Peng L. Die optimization design and experimental study of a large wallboard aluminum alloy profile used for high-speed train The International Journal of Advanced Manufacturing Technology. 74: 539-549. DOI: 10.1007/S00170-014-5903-7  0.373
2014 Mu Y, Zhao G, Chen A, Li S. Modeling and simulation of morphology variation during the solidification of polymer melts with amorphous and semi-crystalline phases Polymers For Advanced Technologies. 25: 1471-1483. DOI: 10.1002/Pat.3389  0.377
2014 Dong G, Zhao G, Guan Y, Wang G, Wang X. The cell forming process of microcellular injection‐molded parts Journal of Applied Polymer Science. 131. DOI: 10.1002/App.40365  0.336
2013 Zhang C, Zhao G, Li T, Guan Y, Chen H, Li P. An Investigation of Die Wear Behavior During Aluminum Alloy 7075 Tube Extrusion Journal of Tribology-Transactions of the Asme. 135: 11602. DOI: 10.1115/1.4023081  0.368
2013 Sun X, Zhao G, Zhang C, Guan Y, Gao A. Optimal Design of Second-Step Welding Chamber for a Condenser Tube Extrusion Die Based on the Response Surface Method and the Genetic Algorithm Materials and Manufacturing Processes. 28: 823-834. DOI: 10.1080/10426914.2012.736657  0.338
2013 Li W, Zhao G, Ma X, Gao J. Study on Forming Limit Diagrams of AZ31B Alloy Sheet at Different Temperatures Materials and Manufacturing Processes. 28: 306-311. DOI: 10.1080/10426914.2012.689453  0.347
2013 Li T, Zhao G, Zhang C, Guan Y, Sun X, Li H. Effect of Process Parameters on Die Wear Behavior of Aluminum Alloy Rod Extrusion Materials and Manufacturing Processes. 28: 312-318. DOI: 10.1080/10426914.2012.675536  0.383
2013 Lu B, Chen S, Xu J, Zhao G. Thermoelectric Performances of Different Types of Polyselenophene and its Copolymers with 3-Methylthiophene via Electropolymerization Synthetic Metals. 183: 8-15. DOI: 10.1016/J.Synthmet.2013.09.013  0.636
2013 Li H, He L, Zhao G, Zhang L. Constitutive relationships of hot stamping boron steel B1500HS based on the modified Arrhenius and Johnson–Cook model Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 580: 330-348. DOI: 10.1016/J.Msea.2013.05.023  0.349
2013 Wang X, Zhao G, Wang G. Research on the reduction of sink mark and warpage of the molded part in rapid heat cycle molding process Materials & Design. 47: 779-792. DOI: 10.1016/J.Matdes.2012.12.047  0.387
2013 Wang G, Zhao G, Wang X. Effects of cavity surface temperature on mechanical properties of specimens with and without a weld line in rapid heat cycle molding Materials & Design. 46: 457-472. DOI: 10.1016/J.Matdes.2012.10.054  0.369
2013 Wang G, Zhao G, Wang X. Effects of cavity surface temperature on reinforced plastic part surface appearance in rapid heat cycle moulding Materials & Design. 44: 509-520. DOI: 10.1016/J.Matdes.2012.08.039  0.329
2013 Zhang C, Zhao G, Chen H, Guan Y, Cai H, Gao B. Investigation on Effects of Die Orifice Layout on Three-Hole Porthole Extrusion of Aluminum Alloy 6063 Tubes Journal of Materials Engineering and Performance. 22: 1223-1232. DOI: 10.1007/S11665-012-0405-Y  0.385
2013 Zhao G, Chen H, Zhang C, Guan Y. Multiobjective optimization design of porthole extrusion die using Pareto-based genetic algorithm The International Journal of Advanced Manufacturing Technology. 69: 1547-1556. DOI: 10.1007/S00170-013-5124-5  0.313
2013 Mu Y, Zhao G, Chen A, Wu X. Modeling and simulation of polymer melts flow in the extrusion process of plastic profile with metal insert The International Journal of Advanced Manufacturing Technology. 67: 629-646. DOI: 10.1007/S00170-012-4511-7  0.401
2013 Guan Y, Yuan G, Sun S, Zhao G. Process simulation and optimization of laser tube bending The International Journal of Advanced Manufacturing Technology. 65: 333-342. DOI: 10.1007/S00170-012-4172-6  0.308
2013 Mu Y, Zhao G, Chen A, Wu X. Modeling and Simulation of the Crystallization Behavior of Polymer Melts in the Hollow‐Profile Extrusion Process Using the Coexistence Model of Spherulite and Shish‐Kebab Macromolecular Theory and Simulations. 22: 36-51. DOI: 10.1002/Mats.201200028  0.311
2013 Mu Y, Zhao G, Chen A, Wu X. Modeling and simulation of three-dimensional extrusion swelling of viscoelastic fluids with PTT, Giesekus and FENE-P constitutive models International Journal For Numerical Methods in Fluids. 72: 846-863. DOI: 10.1002/Fld.3760  0.323
2013 Zhang A, Zhao G, Guan Y. Effect of surface modifiers and surface modification methods on properties of acrylonitrile–butadiene–styrene/poly(methyl methacrylate)/nano‐calcium carbonate composites Journal of Applied Polymer Science. 127: 2520-2528. DOI: 10.1002/App.37577  0.334
2013 Mu Y, Zhao G, Wu X, Zhai J. Finite-Element Simulation of Polymer Flow and Extrudate Swell Through Hollow Profile Extrusion Die with the Multimode Differential Viscoelastic Model Advances in Polymer Technology. 32. DOI: 10.1002/Adv.20265  0.363
2012 Li H, He L, Zhao G, Zhang L. Optimization of Heat Treatment Parameters of Boron Steel B1500HS Using Response Surface Methodology Materials Performance and Characterization. 1: 104359. DOI: 10.1520/Mpc104359  0.357
2012 Guan Y, Zhang C, Zhao G, Sun X, Li P. Design of a Multihole Porthole Die for Aluminum Tube Extrusion Materials and Manufacturing Processes. 27: 147-153. DOI: 10.1080/10426914.2011.564252  0.357
2012 Zhang C, Zhao G, Chen Z, Chen H, Kou F. Effect of extrusion stem speed on extrusion process for a hollow aluminum profile Materials Science and Engineering B-Advanced Functional Solid-State Materials. 177: 1691-1697. DOI: 10.1016/J.Mseb.2011.09.041  0.349
2012 Mu Y, Zhao G, Chen A, Wu X. Numerical investigation of the thermally and flow induced crystallization behavior of semi-crystalline polymers by using finite element–finite difference method Computers & Chemical Engineering. 46: 190-204. DOI: 10.1016/J.Compchemeng.2012.06.026  0.358
2012 Mu Y, Zhao G, Wu X, Zhai J. Modeling and simulation of three-dimensional planar contraction flow of viscoelastic fluids with PTT, Giesekus and FENE-P constitutive models Applied Mathematics and Computation. 218: 8429-8443. DOI: 10.1016/J.Amc.2012.01.067  0.309
2012 Zhang C, Zhao G, Chen H, Guan Y, Li H. Optimization of an aluminum profile extrusion process based on Taguchi’s method with S/N analysis The International Journal of Advanced Manufacturing Technology. 60: 589-599. DOI: 10.1007/S00170-011-3622-X  0.369
2012 Zhang C, Zhao G, Chen H, Guan Y, Kou F. Numerical simulation and metal flow analysis of hot extrusion process for a complex hollow aluminum profile The International Journal of Advanced Manufacturing Technology. 60: 101-110. DOI: 10.1007/S00170-011-3609-7  0.346
2012 Wang G, Zhao G, Guan Y. Thermal response of an electric heating rapid heat cycle molding mold and its effect on surface appearance and tensile strength of the molded part Journal of Applied Polymer Science. 128: 1339-1352. DOI: 10.1002/App.38274  0.381
2011 Cheng G, Zhao G, Guan Y, Wang Z. Study on Deflection Performance of Radial Tire by Finite Element Method Noise & Vibration Worldwide. 42: 30-35. DOI: 10.1260/0957-4565.42.11.30  0.305
2011 Liu J, Zhao G, Guan Y. Influence of Mold Temperature on Melt Filling Process of a Thin Plate Part with Microstructures in Injection Molding Advanced Science Letters. 4: 2681-2685. DOI: 10.1166/Asl.2011.1648  0.368
2011 Wang G, Zhao G, Guan Y. Development and Experimental Study of a New Electric-Heating Rapid Thermal Response Mold for RHCM Process Advanced Science Letters. 4: 2082-2086. DOI: 10.1166/Asl.2011.1418  0.304
2011 Chen H, Zhao G, Zhang C, Guan Y, Liu H, Kou F. Numerical Simulation of Extrusion Process and Die Structure Optimization for a Complex Aluminum Multicavity Wallboard of High-Speed Train Materials and Manufacturing Processes. 26: 1530-1538. DOI: 10.1080/10426914.2011.551950  0.347
2011 Liu J, Zhao G, Wang G, Guan Y. Fully Coupled Transient Heat Transfer and Melt Filling Simulations in Rapid Heat Cycle Molding with Steam Heating Polymer-Plastics Technology and Engineering. 50: 423-437. DOI: 10.1080/03602559.2010.543233  0.335
2011 cheng G, Wang W, Zhao G, Guan Y, Wang Z. Influence of Camber Angle on Rolling Radial Tire under Braking State Procedia Engineering. 15: 4310-4315. DOI: 10.1016/J.Proeng.2011.08.809  0.33
2011 Wang G, Zhao G, Li H, Guan Y. Multi-objective optimization design of the heating/cooling channels of the steam-heating rapid thermal response mold using particle swarm optimization International Journal of Thermal Sciences. 50: 790-802. DOI: 10.1016/J.Ijthermalsci.2011.01.005  0.335
2011 Wang G, Zhao G, Li H, Guan Y. Research on optimization design of the heating/cooling channels for rapid heat cycle molding based on response surface methodology and constrained particle swarm optimization Expert Systems With Applications. 38: 6705-6719. DOI: 10.1016/J.Eswa.2010.11.063  0.313
2011 He L, Zhao G, Li H, Xiang N. Research on mechanical properties of 22MnB5 steel quenched in a steel die Journal of Shanghai Jiaotong University (Science). 16: 129-132. DOI: 10.1007/S12204-011-1106-7  0.354
2011 Zhang C, Leotoing L, Zhao G, Guines D, Ragneau E. A Comparative Study of Different Necking Criteria for Numerical and Experimental Prediction of FLCs Journal of Materials Engineering and Performance. 20: 1036-1042. DOI: 10.1007/S11665-010-9729-7  0.325
2011 Lu P, Zhao G, Guan Y, Wu X. Research on rigid/visco-plastic element-free Galerkin method and key simulation techniques for three-dimensional bulk metal forming processes The International Journal of Advanced Manufacturing Technology. 53: 485-503. DOI: 10.1007/S00170-010-2859-0  0.344
2011 Zhao G, Wang G, Guan Y, Li H. Research and application of a new rapid heat cycle molding with electric heating and coolant cooling to improve the surface quality of large LCD TV panels Polymers For Advanced Technologies. 22: 476-487. DOI: 10.1002/Pat.1536  0.335
2011 Wang G, Zhao G, Guan Y. Research on optimum heating system design for rapid thermal response mold with electric heating based on response surface methodology and particle swarm optimization Journal of Applied Polymer Science. 119: 902-921. DOI: 10.1002/App.32771  0.32
2010 Li H, He L, Zhao G. Metallo-Thermo-Mechanical Coupled Analysis of Quenching Process for the Plane Strain Problems Journal of Astm International. 7: 1-20. DOI: 10.1520/Jai103079  0.334
2010 Zhao G, Li X, Guan Y. Multi-Objective Optimization of the Heating Rods Layout for Rapid Electrical Heating Cycle Injection Mold Journal of Mechanical Design. 132: 61001. DOI: 10.1115/1.4001529  0.321
2010 Zhang A, Zhao G, Gao J, Guan Y. Effect of Acrylonitrile-Butadiene-Styrene High-Rubber Powder and Strain Rate on the Morphology and Mechanical Properties of Acrylonitrile-Butadiene-Styrene/Poly (Methyl Methacrylate) Blends Polymer-Plastics Technology and Engineering. 49: 296-304. DOI: 10.1080/03602550903413979  0.343
2010 Zhang C, Leotoing L, Zhao G, Guines D, Ragneau E. A methodology for evaluating sheet formability combining the tensile test with the M–K model Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 528: 480-485. DOI: 10.1016/J.Msea.2010.09.001  0.334
2010 Wang G, Zhao G, Li H, Guan Y. Research of thermal response simulation and mold structure optimization for rapid heat cycle molding processes, respectively, with steam heating and electric heating Materials & Design. 31: 382-395. DOI: 10.1016/J.Matdes.2009.06.010  0.338
2010 Mu Y, Zhao G, Wu X, Zhang C. An optimization strategy for die design in the low-density polyethylene annular extrusion process based on FES/BPNN/NSGA-II The International Journal of Advanced Manufacturing Technology. 50: 517-532. DOI: 10.1007/S00170-010-2556-Z  0.356
2010 Zhang A, Zhao G, Guan Y, Chen G. Study on Mechanical and Flow Properties of Acrylonitrile-butadiene-styrene/Poly(methyl methacrylate)/Nano-Calcium Carbonate Composites Polymer Composites. 31: 1593-1602. DOI: 10.1002/Pc.20947  0.316
2010 Li X, Zhao G, Guan Y, Ma M. Multi‐objective optimization of heating channels for rapid heating cycle injection mold using Pareto‐based genetic algorithm Polymers For Advanced Technologies. 21: 669-678. DOI: 10.1002/Pat.1488  0.32
2009 Dean SW, Li H, Zhao G, He L. Finite Element Method Numerical Simulation of the Carburizing Process Journal of Astm International. 6: 101748. DOI: 10.1520/Jai101748  0.304
2009 Wang G, Zhao G, Li H, Guan Y. Research on a New Variotherm Injection Molding Technology and its Application on the Molding of a Large LCD Panel Polymer-Plastics Technology and Engineering. 48: 671-681. DOI: 10.1080/03602550902824549  0.36
2009 Li X, Zhao G, Guan Y, Ma M. Optimal design of heating channels for rapid heating cycle injection mold based on response surface and genetic algorithm Materials & Design. 30: 4317-4323. DOI: 10.1016/J.Matdes.2009.04.016  0.336
2009 Li H, Zhao G, He L, Mo Y. Solution of non-linear thermal transient problems by a new adaptive time-step method in quenching process Applied Mathematical Modelling. 33: 329-342. DOI: 10.1016/J.Apm.2007.11.004  0.365
2009 Li X, Zhao G, Guan Y, Li H. Research on thermal stress, deformation, and fatigue lifetime of the rapid heating cycle injection mold. The International Journal of Advanced Manufacturing Technology. 45: 261-275. DOI: 10.1007/S00170-009-1969-Z  0.379
2009 Yanjin G, Xin W, Zhao G, Ping L. A nonlinear numerical analysis for metal-forming process using the rigid-(visco)plastic element-free Galerkin method The International Journal of Advanced Manufacturing Technology. 42: 83-92. DOI: 10.1007/S00170-008-1585-3  0.368
2008 Lu P, Zhao G, Guan Y, Wu X. Bulk metal forming process simulation based on rigid-plastic/viscoplastic element free Galerkin method Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 479: 197-212. DOI: 10.1016/J.Msea.2007.06.059  0.361
2008 Li H, Zhao G, He L. Finite element method based simulation of stress–strain field in the quenching process Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 478: 276-290. DOI: 10.1016/J.Msea.2007.05.101  0.365
2008 Xu S, Zhao G, Ren X, Guan Y. Numerical investigation of aluminum deformation behavior in three-dimensional continuous confined strip shearing process Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 476: 281-289. DOI: 10.1016/J.Msea.2007.05.003  0.401
2008 Li H, Zhao G, He L, Mu Y. High-speed data acquisition of the cooling curves and evaluation of heat transfer coefficient in quenching process Measurement. 41: 676-686. DOI: 10.1016/J.Measurement.2007.10.003  0.329
2008 Lou S, Zhao G, Wang R, Wu X. Modeling of aluminum alloy profile extrusion process using finite volume method Journal of Materials Processing Technology. 206: 481-490. DOI: 10.1016/J.Jmatprotec.2007.12.084  0.413
2008 Wu L, Jia Y, Sun S, Zhang G, Zhao G, An L. Numerical Simulation of Reactive Extrusion Processes for Activated Anionic Polymerization Journal of Materials Processing Technology. 199: 56-63. DOI: 10.1016/J.Jmatprotec.2007.07.026  0.323
2007 Wu L, Jia Y, Sun S, Zhang G, Zhao G, An L. Study on reactive extrusion processes of block copolymer Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 454: 221-226. DOI: 10.1016/J.Msea.2006.11.154  0.347
2007 Guan Y, Zhao G, Wu X, Lu P. Massive metal forming process simulation based on rigid/visco-plastic element-free Galerkin method Journal of Materials Processing Technology. 187: 412-416. DOI: 10.1016/J.Jmatprotec.2006.11.075  0.356
2007 Xu S, Zhao G, Ma X, Ren G. Finite element analysis and optimization of equal channel angular pressing for producing ultra-fine grained materials Journal of Materials Processing Technology. 184: 209-216. DOI: 10.1016/J.Jmatprotec.2006.11.025  0.37
2007 Zhang H, Zhao G, Ma X. Adaptive generation of hexahedral element mesh using an improved grid-based method Computer-Aided Design. 39: 914-928. DOI: 10.1016/J.Cad.2007.05.016  0.313
2007 Jia Y, Zhang G, Wu L, Sun S, Zhao G, An L. Analysis of chemical calorific effect during reactive extrusion processes for free radical polymerization Polymer International. 56: 1553-1557. DOI: 10.1002/Pi.2303  0.327
2007 Jia Y, Zhang G, Wu L, Sun S, Zhao G, An L. Computer simulation of reactive extrusion processes for free radical polymerization Polymer Engineering and Science. 47: 667-674. DOI: 10.1002/Pen.20739  0.325
2007 Mu Y, Zhao G, Qin S, Chen A. Numerical simulation of three‐dimensional polymer extrusion flow with differential viscoelastic model Polymers For Advanced Technologies. 18: 1004-1014. DOI: 10.1002/Pat.959  0.361
2007 Zhang G, Jia Y, Sun S, Wu L, Zhao G, An L. Investigation of the gel effect in reactive extrusion processes for free radical polymerization Macromolecular Reaction Engineering. 1: 321-330. DOI: 10.1002/Mren.200600030  0.32
2007 Wu L, Jia Y, Sun S, Zhang G, Zhao G, An L. Numerical simulation of reactive extrusion processes of PA6 Journal of Applied Polymer Science. 103: 2331-2336. DOI: 10.1002/App.24815  0.348
2006 Zhang M, Jia Y, Sun S, Zhao G. Three-Dimensional Nonisothermal Simulation of Multi-Layer Extrusion Processes of Polymer Melts Polymer-Plastics Technology and Engineering. 45: 1257-1262. DOI: 10.1080/03602550600916993  0.335
2006 Zhao G, Xu S, Luan Y, Guan Y, Lun N, Ren X. Grain refinement mechanism analysis and experimental investigation of equal channel angular pressing for producing pure aluminum ultra-fine grained materials Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 437: 281-292. DOI: 10.1016/J.Msea.2006.07.138  0.404
2006 Xu S, Zhao G, Luan Y, Guan Y. Numerical studies on processing routes and deformation mechanism of multi-pass equal channel angular pressing processes Journal of Materials Processing Technology. 176: 251-259. DOI: 10.1016/J.Jmatprotec.2006.03.167  0.349
2005 Guan Y, Sun S, Zhao G, Luan Y. Influence of material properties on the laser-forming process of sheet metals Journal of Materials Processing Technology. 167: 124-131. DOI: 10.1016/J.Jmatprotec.2004.10.003  0.377
2004 Zhao G, Ma X, Zhao X, Grandhi RV. Studies on optimization of metal forming processes using sensitivity analysis methods Journal of Materials Processing Technology. 147: 217-228. DOI: 10.1016/J.Jmatprotec.2003.12.018  0.327
2003 Jia Y, Sun S, Xue S, Liu L, Zhao G. Numerical Simulation of Moldable Silicone Rubber Vulcanization Process Based on Thermal Coupling Analysis Polymer-Plastics Technology and Engineering. 42: 883-898. DOI: 10.1081/Ppt-120025001  0.337
2003 Jia Y, Sun S, Liu L, Xue S, Zhao G. Investigation of computer-aided engineering of silicone rubber vulcanizing (I)—vulcanization degree calculation based on temperature field analysis Polymer. 44: 319-326. DOI: 10.1016/S0032-3861(02)00704-8  0.317
2002 Zhao X, Zhao G, Wang G, Wang T. Preform die shape design for uniformity of deformation in forging based on preform sensitivity analysis Journal of Materials Processing Technology. 128: 25-32. DOI: 10.1016/S0924-0136(02)00054-7  0.333
2002 Jia Y, Sun S, Xue S, Liu L, Zhao G. Investigation of computer-aided engineering of silicone rubber vulcanizing (II)—finite element simulation of unsteady vulcanization field Polymer. 43: 7515-7520. DOI: 10.1016/S0032-3861(02)00705-X  0.306
1997 Zhao G, Wright E, Grandhi RV. Sensitivity analysis based preform die shape design for net-shape forging International Journal of Machine Tools & Manufacture. 37: 1251-1271. DOI: 10.1016/S0890-6955(96)00087-9  0.337
1996 Zhao G, Wright E, Grandhi RV. Computer aided preform design in forging using the inverse die contact tracking method International Journal of Machine Tools & Manufacture. 36: 755-769. DOI: 10.1016/0890-6955(96)00123-X  0.357
1995 Zhao G, Wright E, Grandhi RV. Forging preform design with shape complexity control in simulating backward deformation International Journal of Machine Tools & Manufacture. 35: 1225-1239. DOI: 10.1016/0890-6955(94)00117-3  0.333
Show low-probability matches.