Year |
Citation |
Score |
2020 |
Shin YC, Wu B, Lei S, Cheng GJ, Yao YL. Overview of Laser Applications in Manufacturing and Materials Processing in Recent Years Journal of Manufacturing Science and Engineering-Transactions of the Asme. 1-92. DOI: 10.1115/1.4048397 |
0.586 |
|
2020 |
Zhang B, Hong K, Shin YC. Deep-learning-based porosity monitoring of laser welding process Manufacturing Letters. 23: 62-66. DOI: 10.1016/J.Mfglet.2020.01.001 |
0.387 |
|
2020 |
Katinas C, Shin YC. Prediction of initial transient behavior with stationary heating during laser powder bed fusion processes International Journal of Heat and Mass Transfer. 153: 119663. DOI: 10.1016/J.Ijheatmasstransfer.2020.119663 |
0.41 |
|
2020 |
Liu S, Shin YC. Integrated 2D cellular automata-phase field modeling of solidification and microstructure evolution during additive manufacturing of Ti6Al4V Computational Materials Science. 183: 109889. DOI: 10.1016/J.Commatsci.2020.109889 |
0.311 |
|
2020 |
Bailey NS, Hong K, Shin YC. Comparative assessment of dendrite growth and microstructure predictions during laser welding of Al 6061 via 2D and 3D phase field models Computational Materials Science. 172: 109291. DOI: 10.1016/J.Commatsci.2019.109291 |
0.38 |
|
2020 |
Liu S, Shin YC. Prediction of 3D microstructure and phase distributions of Ti6Al4V built by the directed energy deposition process via combined multi-physics models Additive Manufacturing. 34: 101234. DOI: 10.1016/J.Addma.2020.101234 |
0.388 |
|
2020 |
Ajri A, Rohatgi N, Shin YC. Analysis of defect formation mechanisms and their effects on weld strength during friction stir welding of Al 6061-T6 via experiments and finite element modeling The International Journal of Advanced Manufacturing Technology. 107: 4621-4635. DOI: 10.1007/S00170-020-05353-3 |
0.31 |
|
2019 |
Lei S, Zhao X, Yu X, Hu A, Vukelic S, Jun MBG, Joe H, Yao YL, Shin YC. Ultrafast Laser Applications in Manufacturing Processes: A State-of-the-Art Review Journal of Manufacturing Science and Engineering-Transactions of the Asme. 142: 1-43. DOI: 10.1115/Msec2019-2968 |
0.414 |
|
2019 |
Elkhateeb MG, Shin YC. Investigation of the Machining Behavior of Ti6Al4V/TiC Composites During Conventional and Laser-Assisted Machining Journal of Manufacturing Science and Engineering. 141. DOI: 10.1115/1.4042608 |
0.433 |
|
2019 |
Jahan S, Wu T, Shin Y, Tovar A, El-Mounayri H. Thermo-fluid Topology Optimization and Experimental Study of Conformal Cooling Channels for 3D Printed Plastic Injection Molds Procedia Manufacturing. 34: 631-639. DOI: 10.1016/J.Promfg.2019.06.120 |
0.344 |
|
2019 |
Xu H, Guo X, Lei Y, Lin J, Fu H, Xiao R, Huang T, Shin YC. Welding deformation of ultra-thin 316 stainless steel plate using pulsed laser welding process Optics and Laser Technology. 119: 105583. DOI: 10.1016/J.Optlastec.2019.105583 |
0.343 |
|
2019 |
Liu S, Shin YC. Additive manufacturing of Ti6Al4V alloy: A review Materials & Design. 164: 107552. DOI: 10.1016/J.Matdes.2018.107552 |
0.371 |
|
2019 |
Pellone L, Inamke G, Hong K, Shin YC. Effects of interface gap and shielding gas on the quality of alloy AA6061 fiber laser lap weldings Journal of Materials Processing Technology. 268: 201-212. DOI: 10.1016/J.Jmatprotec.2019.01.025 |
0.388 |
|
2019 |
Pachaury Y, Shin YC. Assessment of sub-surface damage during machining of additively manufactured Fe-TiC metal matrix composites Journal of Materials Processing Technology. 266: 173-183. DOI: 10.1016/J.Jmatprotec.2018.11.001 |
0.471 |
|
2019 |
Liu S, Hong K, Katinas C, Shin YC. Multiphysics modeling of phase transformation and microhardness evolution in laser direct deposited Ti6Al4V Journal of Manufacturing Processes. 45: 579-587. DOI: 10.1016/J.Jmapro.2019.07.027 |
0.401 |
|
2019 |
Ning J, Hong K, Inamke G, Shin Y, Zhang L. Analysis of microstructure and mechanical strength of lap joints of TZM alloy welded by a fiber laser Journal of Manufacturing Processes. 39: 146-159. DOI: 10.1016/J.Jmapro.2019.02.015 |
0.349 |
|
2019 |
Liu S, Dhiman A, Shin YC, Tomar V, Zhang ST. In-situ synthesis of Zr-based bulk metallic glass composites with periodic amorphous-crystalline microstructure for improved ductility via laser direct deposition Intermetallics. 111: 106503. DOI: 10.1016/J.Intermet.2019.106503 |
0.415 |
|
2019 |
Dong X, Shin YC. Predictive modeling of microstructure evolution within multi-phase steels during rolling processes International Journal of Mechanical Sciences. 150: 576-583. DOI: 10.1016/J.Ijmecsci.2018.10.061 |
0.696 |
|
2019 |
Zhang B, Liu S, Shin YC. In-Process monitoring of porosity during laser additive manufacturing process Additive Manufacturing. 28: 497-505. DOI: 10.1016/J.Addma.2019.05.030 |
0.423 |
|
2019 |
Inamke GV, Pellone L, Ning J, Shin YC. Enhancement of weld strength of laser-welded joints of AA6061-T6 and TZM alloys via novel dual-laser warm laser shock peening The International Journal of Advanced Manufacturing Technology. 104: 907-919. DOI: 10.1007/S00170-019-03868-Y |
0.375 |
|
2018 |
Katinas C, Liu S, Shin YC. Self-Sufficient Modeling of Single Track Deposition of Ti–6Al–4V With the Prediction of Capture Efficiency Journal of Manufacturing Science and Engineering. 141. DOI: 10.1115/1.4041423 |
0.392 |
|
2018 |
Liu Z, Wu B, Xu R, Zhao K, Shin YC. Microhole Drilling by Double Laser Pulses With Different Pulse Energies Journal of Manufacturing Science and Engineering. 140. DOI: 10.1115/1.4040483 |
0.568 |
|
2018 |
Zhang B, Katinas C, Shin YC. Robust Tool Wear Monitoring Using Systematic Feature Selection in Turning Processes With Consideration of Uncertainties Journal of Manufacturing Science and Engineering. 140. DOI: 10.1115/1.4040267 |
0.401 |
|
2018 |
Katinas C, Shang W, Shin YC, Chen J. Modeling Particle Spray and Capture Efficiency for Direct Laser Deposition Using a Four Nozzle Powder Injection System Journal of Manufacturing Science and Engineering. 140. DOI: 10.1115/1.4038997 |
0.383 |
|
2018 |
Ai Y, Zheng K, Shin YC, Wu B. Analysis of weld geometry and liquid flow in laser transmission welding between polyethylene terephthalate (PET) and Ti6Al4V based on numerical simulation Optics & Laser Technology. 103: 99-108. DOI: 10.1016/J.Optlastec.2018.01.022 |
0.595 |
|
2018 |
Liu Z, Wu B, Samanta A, Shen N, Ding H, Shin YC. Manufacturing of hourglass-shaped through holes with varying diameters at different depths by dual-pulse laser drilling and laser-induced plasma-hole interaction Manufacturing Letters. 16: 18-22. DOI: 10.1016/J.Mfglet.2018.02.007 |
0.692 |
|
2018 |
Liu S, Shin YC. Simulation and experimental studies on microstructure evolution of resolidified dendritic TiC in laser direct deposited Ti-TiC composite Materials & Design. 159: 212-223. DOI: 10.1016/J.Matdes.2018.08.053 |
0.407 |
|
2018 |
Elkhateeb MG, Shin YC. Molecular dynamics-based cohesive zone representation of Ti6Al4V/TiC composite interface Materials & Design. 155: 161-169. DOI: 10.1016/J.Matdes.2018.05.054 |
0.339 |
|
2018 |
Dong X, Shin YC. Predictions of thermal conductivity and degradation of irradiated SiC/SiC composites by materials-genome-based multiscale modeling Journal of Nuclear Materials. 512: 268-275. DOI: 10.1016/J.Jnucmat.2018.10.021 |
0.68 |
|
2018 |
Zhang B, Shin YC. A multimodal intelligent monitoring system for turning processes Journal of Manufacturing Processes. 35: 547-558. DOI: 10.1016/J.Jmapro.2018.08.021 |
0.358 |
|
2018 |
Wei S, Wang G, Shin YC, Rong Y. Comprehensive modeling of transport phenomena in laser hot-wire deposition process International Journal of Heat and Mass Transfer. 125: 1356-1368. DOI: 10.1016/J.Ijheatmasstransfer.2018.04.164 |
0.412 |
|
2018 |
Dong X, Shin YC. Crack formation within ceramics via coupled multiscale genome and XFEM predictions under various loading conditions Engineering Fracture Mechanics. 204: 517-530. DOI: 10.1016/J.Engfracmech.2018.10.036 |
0.678 |
|
2018 |
Dong X, Shin YC. Multi-scale genome modeling for predicting fracture strength of silicon carbide ceramics Computational Materials Science. 141: 10-18. DOI: 10.1016/J.Commatsci.2017.09.012 |
0.689 |
|
2018 |
Parmar V, Shin YC. Wideband anti-reflective silicon surface structures fabricated by femtosecond laser texturing Applied Surface Science. 459: 86-91. DOI: 10.1016/J.Apsusc.2018.07.189 |
0.371 |
|
2018 |
Shah PN, Shin YC, Sun T. Investigation on temporal evolution of the grain refinement in copper under high strain rate loading via in-situ synchrotron measurement and predictive modeling Acta Materialia. 143: 43-54. DOI: 10.1016/J.Actamat.2017.10.005 |
0.331 |
|
2018 |
Liu WK, Shin YC. Special issue on Additive manufacturing: progress in modeling and simulation with experimental validations in additive manufacturing Computational Mechanics. 61: 519-520. DOI: 10.1007/S00466-018-1546-0 |
0.36 |
|
2018 |
Shin YC, Bailey N, Katinas C, Tan W. Predictive modeling capabilities from incident powder and laser to mechanical properties for laser directed energy deposition Computational Mechanics. 61: 617-636. DOI: 10.1007/S00466-018-1545-1 |
0.67 |
|
2017 |
Dong X, Shin YC. Multi-scale modeling of thermal conductivity of SiC-reinforced aluminum metal matrix composite Journal of Composite Materials. 51: 3941-3953. DOI: 10.1177/0021998317695873 |
0.676 |
|
2017 |
Ajri A, Shin YC. Investigation on the Effects of Process Parameters on Defect Formation in Friction Stir Welded Samples Via Predictive Numerical Modeling and Experiments Journal of Manufacturing Science and Engineering. 139. DOI: 10.1115/1.4037240 |
0.306 |
|
2017 |
Hong K, Shin YC. Investigation on Weld Pool Dynamics in Laser Welding of AISI 304 Stainless Steel With an Interface Gap Via a Three-Dimensional Dynamic Model and Experiments Journal of Manufacturing Science and Engineering. 139. DOI: 10.1115/1.4036521 |
0.4 |
|
2017 |
Liu S, Shin YC. The influences of melting degree of TiC reinforcements on microstructure and mechanical properties of laser direct deposited Ti6Al4V-TiC composites Materials & Design. 136: 185-195. DOI: 10.1016/J.Matdes.2017.09.063 |
0.362 |
|
2017 |
Bailey NS, Katinas C, Shin YC. Laser direct deposition of AISI H13 tool steel powder with numerical modeling of solid phase transformation, hardness, and residual stresses Journal of Materials Processing Technology. 247: 223-233. DOI: 10.1016/J.Jmatprotec.2017.04.020 |
0.416 |
|
2017 |
Hong K, Shin YC. Prospects of laser welding technology in the automotive industry: A review Journal of Materials Processing Technology. 245: 46-69. DOI: 10.1016/J.Jmatprotec.2017.02.008 |
0.379 |
|
2017 |
Sarbada S, Shin YC. Superhydrophobic contoured surfaces created on metal and polymer using a femtosecond laser Applied Surface Science. 405: 465-475. DOI: 10.1016/J.Apsusc.2017.02.019 |
0.312 |
|
2017 |
Zhang S, Shin YC. Effective methods for fabricating trapezoidal shape microchannel of arbitrary dimensions on polymethyl methacrylate (PMMA) substrate by a CO2 laser The International Journal of Advanced Manufacturing Technology. 93: 1079-1094. DOI: 10.1007/S00170-017-0445-4 |
0.342 |
|
2016 |
Dong X, Shin YC. Multiscale Finite Element Modeling of Alumina Ceramics Undergoing Laser-Assisted Machining Journal of Manufacturing Science and Engineering, Transactions of the Asme. 138. DOI: 10.1115/1.4029858 |
0.754 |
|
2016 |
Dong X, Shin YC. Multiscale Genome Modeling for Predicting the Thermal Conductivity of Silicon Carbide Ceramics Journal of the American Ceramic Society. 99: 4073-4082. DOI: 10.1111/Jace.14458 |
0.699 |
|
2016 |
Dong X, Shin YC. Multiscale Modeling for Predicting the Mechanical Properties of Silicon Carbide Ceramics Journal of the American Ceramic Society. 99: 1006-1014. DOI: 10.1111/Jace.14047 |
0.682 |
|
2016 |
Dabir-Moghaddam N, Tao S, Wu B, Shin YC. Amplification of Plasma at Different Initial Temperatures inside a Microhole by a Short Laser Pulse and the Effect on the Hole Sidewall Procedia Manufacturing. 5: 724-733. DOI: 10.1016/J.Promfg.2016.08.059 |
0.603 |
|
2016 |
Dabir-Moghaddam N, Tao S, Wu B, Shin YC. Modeling of picosecond laser-induced plasma amplification inside a microhole and an implied novel technology to drill microholes with varying diameters with depth Manufacturing Letters. 7: 1-5. DOI: 10.1016/J.Mfglet.2015.11.004 |
0.603 |
|
2016 |
Hong KM, Shin YC. Analysis of microstructure and mechanical properties change in laser welding of Ti6Al4V with a multiphysics prediction model Journal of Materials Processing Technology. 237: 420-429. DOI: 10.1016/J.Jmatprotec.2016.06.034 |
0.427 |
|
2016 |
Sarbada S, Huang Z, Shin YC, Ruan X. Low-reflectance laser-induced surface nanostructures created with a picosecond laser Applied Physics a: Materials Science and Processing. 122. DOI: 10.1007/S00339-016-0004-0 |
0.387 |
|
2016 |
Hong K, Shin YC. The effects of interface gap on weld strength during overlapping fiber laser welding of AISI 304 stainless steel and AZ31 magnesium alloys The International Journal of Advanced Manufacturing Technology. 90: 3685-3696. DOI: 10.1007/S00170-016-9681-2 |
0.352 |
|
2016 |
Dong X, Shin YC. Improved machinability of SiC/SiC ceramic matrix composite via laser-assisted micromachining International Journal of Advanced Manufacturing Technology. 1-9. DOI: 10.1007/S00170-016-9415-5 |
0.755 |
|
2016 |
Ngo PD, Shin YC. Modeling and robust controlling of laser welding process on high strength titanium alloy using fuzzy basis function networks and robust Takagi-Sugeno fuzzy controller The International Journal of Advanced Manufacturing Technology. 89: 1089-1102. DOI: 10.1007/S00170-016-9104-4 |
0.356 |
|
2016 |
Dong X, Liao C, Shin YC, Zhang HH. Machinability improvement of gear hobbing via process simulation and tool wear predictions International Journal of Advanced Manufacturing Technology. 1-9. DOI: 10.1007/S00170-016-8400-3 |
0.729 |
|
2015 |
Cao Y, Xie X, Antonaglia J, Winiarski B, Wang G, Shin YC, Withers PJ, Dahmen KA, Liaw PK. Laser Shock Peening on Zr-based Bulk Metallic Glass and Its Effect on Plasticity: Experiment and Modeling. Scientific Reports. 5: 10789. PMID 25991412 DOI: 10.1038/Srep10789 |
0.45 |
|
2015 |
Tan W, Shin YC. Laser keyhole welding of stainless steel thin plate stack for applications in fuel cell manufacturing Science and Technology of Welding and Joining. 20: 313-318. DOI: 10.1179/1362171815Y.0000000005 |
0.608 |
|
2015 |
Bailey NS, Tan W, Shin YC. A parametric study on laser welding of magnesium alloy AZ31 by a fiber laser Journal of Manufacturing Science and Engineering, Transactions of the Asme. 137. DOI: 10.1115/1.4029052 |
0.624 |
|
2015 |
Dong X, Shin YC. Coupled thermomechanical multiscale modeling of alumina ceramics to predict thermally induced fractures under laser heating Journal of the American Ceramic Society. 98: 920-928. DOI: 10.1111/Jace.13349 |
0.707 |
|
2015 |
Luo M, Shin YC. Vision-based weld pool boundary extraction and width measurement during keyhole fiber laser welding Optics and Lasers in Engineering. 64: 59-70. DOI: 10.1016/J.Optlaseng.2014.07.004 |
0.351 |
|
2015 |
Tan W, Shin YC. Multi-scale modeling of solidification and microstructure development in laser keyhole welding process for austenitic stainless steel Computational Materials Science. 98: 446-458. DOI: 10.1016/J.Commatsci.2014.10.063 |
0.66 |
|
2015 |
Cao Y, Shin YC. Multi-scale modeling of phase explosion in high fluence nanosecond laser ablation and clarification of ablation depth prediction criterion Applied Surface Science. 357: 74-85. DOI: 10.1016/J.Apsusc.2015.08.251 |
0.387 |
|
2015 |
Ye X, Bae H, Shin YC, Stanciu LA. In Situ Synthesis and Characterization of Zr-Based Amorphous Composite by Laser Direct Deposition Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 46: 4316-4325. DOI: 10.1007/S11661-015-3047-5 |
0.366 |
|
2015 |
Zhao X, Shin YC. Laser–plasma interaction and plasma enhancement by ultrashort double-pulse ablation Applied Physics B: Lasers and Optics. 120: 81-87. DOI: 10.1007/S00340-015-6102-4 |
0.348 |
|
2015 |
Luo M, Shin YC. Estimation of keyhole geometry and prediction of welding defects during laser welding based on a vision system and a radial basis function neural network International Journal of Advanced Manufacturing Technology. 81: 263-276. DOI: 10.1007/S00170-015-7079-1 |
0.335 |
|
2015 |
Hedberg GK, Shin YC, Xu L. Laser-assisted milling of Ti-6Al-4V with the consideration of surface integrity International Journal of Advanced Manufacturing Technology. 79: 1645-1658. DOI: 10.1007/S00170-015-6942-4 |
0.468 |
|
2014 |
Dong X, Shin YC. Multi-scale finite element modeling of alumina ceramics undergoing laser-assisted machining Asme 2014 International Manufacturing Science and Engineering Conference, Msec 2014 Collocated With the Jsme 2014 International Conference On Materials and Processing and the 42nd North American Manufacturing Research Conference. 2. DOI: 10.1115/MSEC2014-3956 |
0.696 |
|
2014 |
Zhao X, Cao Y, Nian Q, Cheng G, Shin YC. Control of ablation depth and surface structure in P3 scribing of thin-film solar cells by a picosecond laser Asme 2014 International Manufacturing Science and Engineering Conference, Msec 2014 Collocated With the Jsme 2014 International Conference On Materials and Processing and the 42nd North American Manufacturing Research Conference. 1. DOI: 10.1115/1.4027733 |
0.37 |
|
2014 |
Ding H, Shin YC. Dislocation density-based grain refinement modeling of orthogonal cutting of titanium Journal of Manufacturing Science and Engineering, Transactions of the Asme. 136. DOI: 10.1115/1.4027207 |
0.634 |
|
2014 |
Tan W, Shin YC. Analysis of multi-phase interaction and its effects on keyhole dynamics with a multi-physics numerical model Journal of Physics D: Applied Physics. 47. DOI: 10.1088/0022-3727/47/34/345501 |
0.652 |
|
2014 |
Zhao X, Shin YC. Ablation enhancement of silicon by ultrashort double-pulse laser ablation Applied Physics Letters. 105. DOI: 10.1063/1.4896350 |
0.398 |
|
2014 |
Ye X, Shin YC. Synthesis and characterization of Fe-based amorphous composite by laser direct deposition Surface and Coatings Technology. 239: 34-40. DOI: 10.1016/J.Surfcoat.2013.11.013 |
0.339 |
|
2014 |
Wilson JM, Piya C, Shin YC, Zhao F, Ramani K. Remanufacturing of turbine blades by laser direct deposition with its energy and environmental impact analysis Journal of Cleaner Production. 80: 170-178. DOI: 10.1016/J.Jclepro.2014.05.084 |
0.365 |
|
2014 |
Zhao X, Cao Y, Nian Q, Shin YC, Cheng G. Precise selective scribing of thin-film solar cells by a picosecond laser Applied Physics a: Materials Science and Processing. 116: 671-681. DOI: 10.1007/S00339-014-8330-6 |
0.427 |
|
2013 |
Wilson JM, Jones N, Jin L, Shin YC. Laser deposited coatings of Co-Cr-Mo onto Ti-6Al-4V and SS316L substrates for biomedical applications. Journal of Biomedical Materials Research. Part B, Applied Biomaterials. 101: 1124-32. PMID 23564675 DOI: 10.1002/Jbm.B.32921 |
0.309 |
|
2013 |
Cao Y, Zhao X, Shin YC. Analysis of nanosecond laser ablation of aluminum with and without phase explosion in air and water Journal of Laser Applications. 25: 032002. DOI: 10.2351/1.4794032 |
0.45 |
|
2013 |
Zhao X, Shin YC. Ablation dynamics of silicon by femtosecond laser and the role of early plasma Asme 2013 International Manufacturing Science and Engineering Conference Collocated With the 41st North American Manufacturing Research Conference, Msec 2013. 1. DOI: 10.1115/1.4025805 |
0.438 |
|
2013 |
Tan W, Bailey NS, Shin YC. Investigation of keyhole plume and molten pool based on a three-dimensional dynamic model with sharp interface formulation Journal of Physics D: Applied Physics. 46. DOI: 10.1088/0022-3727/46/5/055501 |
0.662 |
|
2013 |
Zhao X, Shin YC. Coulomb explosion and early plasma generation during femtosecond laser ablation of silicon at high laser fluence Journal of Physics D: Applied Physics. 46: 335501. DOI: 10.1088/0022-3727/46/33/335501 |
0.421 |
|
2013 |
Ding H, Shin YC. IMPROVING MACHINABILITY OF HIGH CHROMIUM WEAR-RESISTANT MATERIALS VIA LASER–ASSISTED MACHINING Machining Science and Technology. 17: 246-269. DOI: 10.1080/10910344.2013.780549 |
0.658 |
|
2013 |
Zhang MY, Nian Q, Shin Y, Cheng GJ. Direct pulsed laser crystallization of nanocrystals for absorbent layers in photovoltaics: Multiphysics simulation and experiment Journal of Applied Physics. 113: 193506. DOI: 10.1063/1.4805039 |
0.363 |
|
2013 |
Halani PR, Kaya I, Shin YC, Karaca HE. Phase transformation characteristics and mechanical characterization of nitinol synthesized by laser direct deposition Materials Science and Engineering: A. 559: 836-843. DOI: 10.1016/J.Msea.2012.09.031 |
0.385 |
|
2013 |
Ding H, Shin YC. Multi-physics modeling and simulations of surface microstructure alteration in hard turning Journal of Materials Processing Technology. 213: 877-886. DOI: 10.1016/J.Jmatprotec.2012.12.016 |
0.622 |
|
2013 |
Dandekar CR, Shin YC. Multi-scale modeling to predict sub-surface damage applied to laser-assisted machining of a particulate reinforced metal matrix composite Journal of Materials Processing Technology. 213: 153-160. DOI: 10.1016/J.Jmatprotec.2012.09.010 |
0.808 |
|
2013 |
Wou SJ, Shin YC, El-Mounayri H. Ball end milling mechanistic model based on a voxel-based geometric representation and a ray casting technique Journal of Manufacturing Processes. 15: 338-347. DOI: 10.1016/J.Jmapro.2012.12.003 |
0.401 |
|
2013 |
Subrahmanya N, Shin YC. A data-based framework for fault detection and diagnostics of non-linear systems with partial state measurement Engineering Applications of Artificial Intelligence. 26: 446-455. DOI: 10.1016/J.Engappai.2012.09.004 |
0.727 |
|
2013 |
Zhao X, Shin YC. Femtosecond laser ablation of aluminum in vacuum and air at high laser intensity Applied Surface Science. 283: 94-99. DOI: 10.1016/J.Apsusc.2013.06.037 |
0.437 |
|
2013 |
Cao Y, Shin YC, Pipes RB. Etching of long fiber polymeric composite materials by nanosecond laser induced water breakdown plasma Applied Surface Science. 268: 6-10. DOI: 10.1016/J.Apsusc.2012.11.061 |
0.365 |
|
2013 |
Subrahmanya N, Shin YC. A variational Bayesian framework for group feature selection International Journal of Machine Learning and Cybernetics. 4: 609-619. DOI: 10.1007/S13042-012-0121-9 |
0.742 |
|
2013 |
Dandekar CR, Shin YC. Experimental evaluation of laser-assisted machining of silicon carbide particle-reinforced aluminum matrix composites International Journal of Advanced Manufacturing Technology. 66: 1603-1610. DOI: 10.1007/S00170-012-4443-2 |
0.802 |
|
2012 |
Hu W, Shin YC, King GB. Investigation of early plasma evolution induced by ultrashort laser pulses. Journal of Visualized Experiments : Jove. PMID 22806170 DOI: 10.3791/4033 |
0.537 |
|
2012 |
Ding H, Shin YC. A Metallo-Thermomechanically Coupled Analysis of Orthogonal Cutting of AISI 1045 Steel Journal of Manufacturing Science and Engineering. 134. DOI: 10.1115/1.4007464 |
0.636 |
|
2012 |
Tan W, Bailey NS, Shin YC. Numerical Modeling of Transport Phenomena and Dendritic Growth in Laser Spot Conduction Welding of 304 Stainless Steel Journal of Manufacturing Science and Engineering. 134. DOI: 10.1115/1.4007101 |
0.642 |
|
2012 |
Xu C, Shin YC. A Multilevel Fuzzy Control Design for a Class of Multiinput Single-Output Systems Ieee Transactions On Industrial Electronics. 59: 3113-3123. DOI: 10.1109/Tie.2011.2158033 |
0.463 |
|
2012 |
Hu W, Shin YC, King G. Characteristics of plume plasma and its effects on ablation depth during ultrashort laser ablation of copper in air Journal of Physics D: Applied Physics. 45: 355204. DOI: 10.1088/0022-3727/45/35/355204 |
0.549 |
|
2012 |
Zhao X, Shin YC. A two-dimensional comprehensive hydrodynamic model for femtosecond laser pulse interaction with metals Journal of Physics D: Applied Physics. 45: 105201. DOI: 10.1088/0022-3727/45/10/105201 |
0.436 |
|
2012 |
Wilson JM, Shin YC. Microstructure and wear properties of laser-deposited functionally graded Inconel 690 reinforced with TiC Surface and Coatings Technology. 207: 517-522. DOI: 10.1016/J.Surfcoat.2012.07.058 |
0.35 |
|
2012 |
Ding H, Shen N, Shin YC. Predictive modeling of grain refinement during multi-pass cold rolling Journal of Materials Processing Technology. 212: 1003-1013. DOI: 10.1016/J.Jmatprotec.2011.12.005 |
0.613 |
|
2012 |
Ding H, Shen N, Shin YC. Thermal and mechanical modeling analysis of laser-assisted micro-milling of difficult-to-machine alloys Journal of Materials Processing Technology. 212: 601-613. DOI: 10.1016/J.Jmatprotec.2011.07.016 |
0.686 |
|
2012 |
Dandekar CR, Shin YC. Modeling of machining of composite materials: A review International Journal of Machine Tools and Manufacture. 57: 102-121. DOI: 10.1016/J.Ijmachtools.2012.01.006 |
0.796 |
|
2012 |
Ding H, Shin YC. Dislocation density-based modeling of subsurface grain refinement with laser-induced shock compression Computational Materials Science. 53: 79-88. DOI: 10.1016/J.Commatsci.2011.08.038 |
0.633 |
|
2012 |
Ding H, Shin YC. Improvement of machinability of Waspaloy via laser-assisted machining The International Journal of Advanced Manufacturing Technology. 64: 475-486. DOI: 10.1007/S00170-012-4012-8 |
0.648 |
|
2012 |
Davis TA, Ngo PD, Shin YC. Multi-level fuzzy control of friction stir welding power International Journal of Advanced Manufacturing Technology. 59: 559-567. DOI: 10.1007/S00170-011-3522-0 |
0.335 |
|
2012 |
Shin YC, Dandekar C. Mechanics and modeling of chip formation in machining of MMC Machining of Metal Matrix Composites. 1-49. DOI: 10.1007/978-0-85729-938-3_1 |
0.783 |
|
2011 |
Wen S, Shin YC. Comprehensive predictive modeling and parametric analysis of multitrack direct laser deposition processes Journal of Laser Applications. 23: 022003. DOI: 10.2351/1.3567962 |
0.592 |
|
2011 |
Winiarski B, Wang G, Xie X, Cao Y, Shin Y, Liaw PK, Withers PJ. Mapping Residual-Stress Distributions in a Laser-Peened Vit-105 Bulk-Metallic Glass Using the Focused-Ion-Beam Micro-Slitting Method Mrs Proceedings. 1300. DOI: 10.1557/Opl.2011.329 |
0.316 |
|
2011 |
Ding H, Shen N, Shin YC. Experimental and modeling analysis of micro-milling of hardened H13 tool steel Asme 2011 International Manufacturing Science and Engineering Conference, Msec 2011. 2: 373-386. DOI: 10.1115/MSEC2011-50244 |
0.597 |
|
2011 |
Ding H, Shen N, Shin YC. Experimental Evaluation and Modeling Analysis of Micromilling of Hardened H13 Tool Steels Journal of Manufacturing Science and Engineering. 133. DOI: 10.1115/1.4004499 |
0.634 |
|
2011 |
Davis TA, Shin YC, Yao B. Observer-based adaptive robust control of friction stir welding axial force Ieee/Asme Transactions On Mechatronics. 16: 1032-1039. DOI: 10.1109/Tmech.2010.2071417 |
0.343 |
|
2011 |
Hippalgaonkar RR, Shin YC. Robust optimisation of machining conditions with tool life and surface roughness uncertainties International Journal of Production Research. 49: 3963-3978. DOI: 10.1080/00207543.2010.495207 |
0.306 |
|
2011 |
Hu W, Shin YC, King G. Effect of air breakdown with a focusing lens on ultrashort laser ablation Applied Physics Letters. 99: 234104. DOI: 10.1063/1.3665631 |
0.522 |
|
2011 |
Hu W, Shin YC, King G. Early-stage plasma dynamics with air ionization during ultrashort laser ablation of metal Physics of Plasmas. 18: 093302. DOI: 10.1063/1.3633067 |
0.541 |
|
2011 |
Rao B, Dandekar CR, Shin YC. An experimental and numerical study on the face milling of Ti-6Al-4V alloy: Tool performance and surface integrity Journal of Materials Processing Technology. 211: 294-304. DOI: 10.1016/J.Jmatprotec.2010.10.002 |
0.807 |
|
2011 |
Wen S, Shin YC. Modeling of transport phenomena in direct laser deposition of metal matrix composite International Journal of Heat and Mass Transfer. 54: 5319-5326. DOI: 10.1016/J.Ijheatmasstransfer.2011.08.011 |
0.56 |
|
2011 |
Xu C, Shin YC. A self-tuning fuzzy controller for a class of multi-input multi-output nonlinear systems Engineering Applications of Artificial Intelligence. 24: 238-250. DOI: 10.1016/J.Engappai.2010.10.021 |
0.443 |
|
2011 |
Dandekar CR, Shin YC. Effect of porosity on the interface behavior of an Al2O3-aluminum composite: A molecular dynamics study Composites Science and Technology. 71: 350-356. DOI: 10.1016/J.Compscitech.2010.11.029 |
0.772 |
|
2011 |
Dandekar CR, Shin YC. Molecular dynamics based cohesive zone law for describing Al-SiC interface mechanics Composites Part a: Applied Science and Manufacturing. 42: 355-363. DOI: 10.1016/J.Compositesa.2010.12.005 |
0.783 |
|
2011 |
Ding H, Shen N, Shin YC. Modeling of grain refinement in aluminum and copper subjected to cutting Computational Materials Science. 50: 3016-3025. DOI: 10.1016/J.Commatsci.2011.05.020 |
0.626 |
|
2011 |
Tan W, Bailey NS, Shin YC. A novel integrated model combining Cellular Automata and Phase Field methods for microstructure evolution during solidification of multi-component and multi-phase alloys Computational Materials Science. 50: 2573-2585. DOI: 10.1016/J.Commatsci.2011.03.044 |
0.631 |
|
2011 |
Tan W, Wen S, Bailey N, Shin YC. Multiscale Modeling of Transport Phenomena and Dendritic Growth in Laser Cladding Processes Metallurgical and Materials Transactions B. 42: 1306-1318. DOI: 10.1007/S11663-011-9545-Y |
0.721 |
|
2011 |
Halani PR, Shin YC. In Situ Synthesis and Characterization of Shape Memory Alloy Nitinol by Laser Direct Deposition Metallurgical and Materials Transactions A. 43: 650-657. DOI: 10.1007/S11661-011-0890-X |
0.346 |
|
2011 |
Zhao X, Shin YC. Femtosecond laser drilling of high-aspect ratio microchannels in glass Applied Physics A. 104: 713-719. DOI: 10.1007/S00339-011-6326-Z |
0.423 |
|
2010 |
Subrahmanya N, Shin YC. Sparse multiple kernel learning for signal processing applications. Ieee Transactions On Pattern Analysis and Machine Intelligence. 32: 788-98. PMID 20299705 DOI: 10.1109/Tpami.2009.98 |
0.726 |
|
2010 |
Cao Y, Shin YC, Wu B. Parametric Study on Single Shot and Overlapping Laser Shock Peening on Various Metals via Modeling and Experiments Journal of Manufacturing Science and Engineering. 132. DOI: 10.1115/1.4002850 |
0.634 |
|
2010 |
Dandekar CR, Shin YC. Laser-assisted machining of a fiber reinforced metal matrix composite Journal of Manufacturing Science and Engineering, Transactions of the Asme. 132. DOI: 10.1115/1.4002548 |
0.811 |
|
2010 |
Wen S, Shin YC. Modeling of the Off-Axis High Power Diode Laser Cladding Process Journal of Heat Transfer. 133. DOI: 10.1115/1.4002447 |
0.575 |
|
2010 |
Cao Y, Shin YC. Shock Wave Propagation and Spallation Study in Laser Shock Peening Journal of Engineering Materials and Technology. 132. DOI: 10.1115/1.4002048 |
0.341 |
|
2010 |
Shelton JA, Shin YC. Experimental evaluation of laser-assisted micromilling in a slotting configuration Journal of Manufacturing Science and Engineering, Transactions of the Asme. 132: 0210081-0210089. DOI: 10.1115/1.4001142 |
0.464 |
|
2010 |
Hu W, Shin YC, King GB. Micromachining of metals, alloys, and ceramics by picosecond laser ablation Journal of Manufacturing Science and Engineering, Transactions of the Asme. 132: 0110091-0110097. DOI: 10.1115/1.4000836 |
0.587 |
|
2010 |
Hu W, Shin YC, King G. Energy transport analysis in ultrashort pulse laser ablation through combined molecular dynamics and Monte Carlo simulation Physical Review B. 82. DOI: 10.1103/Physrevb.82.094111 |
0.554 |
|
2010 |
Shelton JA, Shin YC. Comparative evaluation of laser-assisted micro-milling for AISI 316, AISI 422, TI-6AL-4V and Inconel 718 in a side-cutting configuration Journal of Micromechanics and Microengineering. 20. DOI: 10.1088/0960-1317/20/7/075012 |
0.487 |
|
2010 |
Wen S, Shin YC. Modeling of transport phenomena during the coaxial laser direct deposition process Journal of Applied Physics. 108: 044908. DOI: 10.1063/1.3474655 |
0.583 |
|
2010 |
Subrahmanya N, Shin YC, Meckl PH. A Bayesian machine learning method for sensor selection and fusion with application to on-board fault diagnostics Mechanical Systems and Signal Processing. 24: 182-192. DOI: 10.1016/J.Ymssp.2009.06.010 |
0.722 |
|
2010 |
Subrahmanya N, Shin YC. Constructive training of recurrent neural networks using hybrid optimization Neurocomputing. 73: 2624-2631. DOI: 10.1016/J.Neucom.2010.05.012 |
0.712 |
|
2010 |
Dandekar CR, Shin YC, Barnes J. Machinability improvement of titanium alloy (Ti-6Al-4V) via LAM and hybrid machining International Journal of Machine Tools and Manufacture. 50: 174-182. DOI: 10.1016/J.Ijmachtools.2009.10.013 |
0.781 |
|
2010 |
Ding H, Shin YC. Laser-assisted machining of hardened steel parts with surface integrity analysis International Journal of Machine Tools and Manufacture. 50: 106-114. DOI: 10.1016/J.Ijmachtools.2009.09.001 |
0.657 |
|
2009 |
Barnes JE, Shin YC, Brandt M, Sun S. High speed machining of titanium alloys Materials Science Forum. 618: 159-163. DOI: 10.4028/Www.Scientific.Net/Msf.618-619.159 |
0.4 |
|
2009 |
Xu∗ C, Shin∗∗ Y. A STABLE HIERARCHICAL FUZZY CONTROL DESIGN FOR CERTAIN NON-LINEAR SYSTEMS BASED ON INPUT–OUTPUT PASSIVITY THEORY Control and Intelligent Systems. 37. DOI: 10.2316/Journal.201.2009.2.201-2006 |
0.449 |
|
2009 |
Hu W, Shin YC, King GB. Micromachining of metals, alloys and ceramics by picosecond laser ablation Proceedings of the Asme International Manufacturing Science and Engineering Conference, Msec2008. 2: 321-328. DOI: 10.1115/MSEC_ICMP2008-72247 |
0.311 |
|
2009 |
Shelton JA, Shin YC. An experimental evaluation of Laser-assisted micromilling of two difficult to machine alloys Proceedings of the Asme International Manufacturing Science and Engineering Conference, Msec2008. 2: 311-320. DOI: 10.1115/MSEC_ICMP2008-72246 |
0.369 |
|
2009 |
Truesdale SL, Shin YC. MICROSTRUCTURAL ANALYSIS AND MACHINABILITY IMPROVEMENT OF UDIMET 720 VIA CRYOGENIC MILLING Machining Science and Technology. 13: 1-19. DOI: 10.1080/10910340902776010 |
0.403 |
|
2009 |
Bailey NS, Tan W, Shin YC. Predictive modeling and experimental results for residual stresses in laser hardening of AISI 4140 steel by a high power diode laser Surface and Coatings Technology. 203: 2003-2012. DOI: 10.1016/J.Surfcoat.2009.01.039 |
0.631 |
|
2009 |
Wen SY, Shin YC, Murthy JY, Sojka PE. Modeling of coaxial powder flow for the laser direct deposition process International Journal of Heat and Mass Transfer. 52: 5867-5877. DOI: 10.1016/J.Ijheatmasstransfer.2009.07.018 |
0.339 |
|
2009 |
Dandekar CR, Shin YC. Multi-step 3-D finite element modeling of subsurface damage in machining particulate reinforced metal matrix composites Composites Part a: Applied Science and Manufacturing. 40: 1231-1239. DOI: 10.1016/J.Compositesa.2009.05.017 |
0.798 |
|
2009 |
Subrahmanya N, Shin YC. Adaptive divided difference filtering for simultaneous state and parameter estimation Automatica. 45: 1686-1693. DOI: 10.1016/J.Automatica.2009.02.029 |
0.716 |
|
2009 |
Wu B, Shin YC. A simplified predictive model for high-fluence ultra-short pulsed laser ablation of semiconductors and dielectrics Applied Surface Science. 255: 4996-5002. DOI: 10.1016/J.Apsusc.2008.12.051 |
0.629 |
|
2009 |
Hu W, Shin YC, King G. Modeling of multi-burst mode pico-second laser ablation for improved material removal rate Applied Physics A. 98: 407-415. DOI: 10.1007/S00339-009-5405-X |
0.566 |
|
2008 |
Dandekar CR, Shin YC. Multiphase finite element modeling of machining unidirectional composites: Prediction of debonding and fiber damage Journal of Manufacturing Science and Engineering, Transactions of the Asme. 130: 0510161-05101612. DOI: 10.1115/1.2976146 |
0.773 |
|
2008 |
Tian Y, Wu B, Anderson M, Shin YC. Laser-Assisted Milling of Silicon Nitride Ceramics and Inconel 718 Journal of Manufacturing Science and Engineering. 130. DOI: 10.1115/1.2927447 |
0.668 |
|
2008 |
Subrahmanya N, Shin YC. Automated sensor selection and fusion for monitoring and diagnostics of plunge grinding Journal of Manufacturing Science and Engineering, Transactions of the Asme. 130: 0310141-03101411. DOI: 10.1115/1.2927439 |
0.726 |
|
2008 |
Xu C, Shin YC. An Adaptive Fuzzy Controller for Constant Cutting Force in End-Milling Processes Journal of Manufacturing Science and Engineering. 130. DOI: 10.1115/1.2823070 |
0.506 |
|
2008 |
Xu C, Shin YC. A Fuzzy Inverse Model Construction Method for General Monotonic Multi-Input-- Single-Output (MISO) Systems Ieee Transactions On Fuzzy Systems. 16: 1216-1231. DOI: 10.1109/Tfuzz.2008.924336 |
0.463 |
|
2008 |
Lakhkar RS, Shin YC, Krane MJM. Predictive modeling of multi-track laser hardening of AISI 4140 steel Materials Science and Engineering: A. 480: 209-217. DOI: 10.1016/J.Msea.2007.07.054 |
0.438 |
|
2008 |
Choi TJ, Subrahmanya N, Li H, Shin YC. Generalized practical models of cylindrical plunge grinding processes International Journal of Machine Tools and Manufacture. 48: 61-72. DOI: 10.1016/J.Ijmachtools.2007.07.010 |
0.81 |
|
2008 |
Li H, Shin YC. Integration of thermo-dynamic spindle and machining simulation models for a digital machining system The International Journal of Advanced Manufacturing Technology. 40: 648-661. DOI: 10.1007/S00170-008-1394-8 |
0.623 |
|
2007 |
Wu B, Shin YC, Pakhal H, Laurendeau NM, Lucht RP. Modeling and experimental verification of plasmas induced by high-power nanosecond laser-aluminum interactions in air. Physical Review. E, Statistical, Nonlinear, and Soft Matter Physics. 76: 026405. PMID 17930160 DOI: 10.1103/Physreve.76.026405 |
0.599 |
|
2007 |
Hahn JD, Shin YC, Krane MJM. Laser transformation hardening of Ti-6Al-4V in solid state with accompanying kinetic model Surface Engineering. 23: 78-82. DOI: 10.1179/174329407X169467 |
0.413 |
|
2007 |
Dandekar CR, Shin YC. Multi-phase finite element modeling of machining unidirectional fiber reinforced composites Proceedings of the Asme International Manufacturing Science and Engineering Conference 2007, Msec2007. 259-268. DOI: 10.1115/MSEC2007-31111 |
0.763 |
|
2007 |
Choi T, Shin YC. Generalized intelligent grinding advisory system International Journal of Production Research. 45: 1899-1932. DOI: 10.1080/00207540600562025 |
0.308 |
|
2007 |
Wu B, Shin YC. Two dimensional hydrodynamic simulation of high pressures induced by high power nanosecond laser-matter interactions under water Journal of Applied Physics. 101: 103514. DOI: 10.1063/1.2734538 |
0.593 |
|
2007 |
Wu B, Shin YC. A one-dimensional hydrodynamic model for pressures induced near the coating-water interface during laser shock peening Journal of Applied Physics. 101: 023510. DOI: 10.1063/1.2426981 |
0.571 |
|
2007 |
Wu B, Shin YC. A simple two-stage model for the formation and expansion of the plasma induced by high intensity nanosecond laser metal ablation in vacuum Physics Letters A. 371: 128-134. DOI: 10.1016/J.Physleta.2007.01.096 |
0.592 |
|
2007 |
Li H, Shin YC. A study on chatter boundaries of cylindrical plunge grinding with process condition-dependent dynamics International Journal of Machine Tools and Manufacture. 47: 1563-1572. DOI: 10.1016/J.Ijmachtools.2006.11.009 |
0.592 |
|
2007 |
Patwa R, Shin YC. Predictive modeling of laser hardening of AISI5150H steels International Journal of Machine Tools and Manufacture. 47: 307-320. DOI: 10.1016/J.Ijmachtools.2006.03.016 |
0.464 |
|
2007 |
Tian Y, Shin YC. Laser-assisted burnishing of metals International Journal of Machine Tools and Manufacture. 47: 14-22. DOI: 10.1016/J.Ijmachtools.2006.03.002 |
0.412 |
|
2007 |
Xu C, Shin YC. Interaction analysis for MIMO nonlinear systems based on a fuzzy basis function network model Fuzzy Sets and Systems. 158: 2013-2025. DOI: 10.1016/J.Fss.2007.02.012 |
0.49 |
|
2007 |
Wu B, Shin YC. A simple model for high fluence ultra-short pulsed laser metal ablation Applied Surface Science. 253: 4079-4084. DOI: 10.1016/J.Apsusc.2006.09.007 |
0.629 |
|
2006 |
Xu C, Shin YC. Control of Cutting Force for Creep-Feed Grinding Processes Using a Multi-Level Fuzzy Controller Journal of Dynamic Systems, Measurement, and Control. 129: 480-492. DOI: 10.1115/1.2718238 |
0.505 |
|
2006 |
Li H, Shin YC. A Time Domain Dynamic Simulation Model for Stability Prediction of Infeed Centerless Grinding Processes Journal of Manufacturing Science and Engineering. 129: 539-550. DOI: 10.1115/1.2716729 |
0.631 |
|
2006 |
Tian Y, Shin YC. Multiscale Finite Element Modeling of Silicon Nitride Ceramics Undergoing Laser-Assisted Machining Journal of Manufacturing Science and Engineering. 129: 287-295. DOI: 10.1115/1.2673595 |
0.435 |
|
2006 |
Wu B, Shin YC. From Incident Laser Pulse to Residual Stress: A Complete and Self-Closed Model for Laser Shock Peening Journal of Manufacturing Science and Engineering. 129: 117-125. DOI: 10.1115/1.2386180 |
0.622 |
|
2006 |
Tian Y, Shin YC. Laser-Assisted Machining of Damage-Free Silicon Nitride Parts with Complex Geometric Features via In-Process Control of Laser Power Journal of the American Ceramic Society. 89: 3397-3405. DOI: 10.1111/J.1551-2916.2006.01265.X |
0.421 |
|
2006 |
Wu B, Shin YC. Absorption coefficient of aluminum near the critical point and the consequences on high-power nanosecond laser ablation Applied Physics Letters. 89: 111902. DOI: 10.1063/1.2352804 |
0.607 |
|
2006 |
Wu B, Shin YC. Modeling of nanosecond laser ablation with vapor plasma formation Journal of Applied Physics. 99: 084310. DOI: 10.1063/1.2190718 |
0.597 |
|
2006 |
Wu B, Shin YC. Laser pulse transmission through the water breakdown plasma in laser shock peening Applied Physics Letters. 88: 041116. DOI: 10.1063/1.2168022 |
0.587 |
|
2006 |
Skvarenina S, Shin YC. Predictive modeling and experimental results for laser hardening of AISI 1536 steel with complex geometric features by a high power diode laser Surface and Coatings Technology. 201: 2256-2269. DOI: 10.1016/J.Surfcoat.2006.03.039 |
0.455 |
|
2006 |
Anderson M, Patwa R, Shin YC. Laser-assisted machining of Inconel 718 with an economic analysis International Journal of Machine Tools and Manufacture. 46: 1879-1891. DOI: 10.1016/J.Ijmachtools.2005.11.005 |
0.458 |
|
2006 |
Skvarenina S, Shin Y. Laser-assisted machining of compacted graphite iron International Journal of Machine Tools and Manufacture. 46: 7-17. DOI: 10.1016/J.Ijmachtools.2005.04.013 |
0.405 |
|
2005 |
Tian Y, Shin YC. Thermal Modeling for Laser-Assisted Machining of Silicon Nitride Ceramics with Complex Features Journal of Manufacturing Science and Engineering. 128: 425-434. DOI: 10.1115/1.2162906 |
0.449 |
|
2005 |
Li H, Shin YC. Wheel Regenerative Chatter of Surface Grinding Journal of Manufacturing Science and Engineering. 128: 393-403. DOI: 10.1115/1.2137752 |
0.626 |
|
2005 |
Li H, Shin YC. A Time-Domain Dynamic Model for Chatter Prediction of Cylindrical Plunge Grinding Processes Journal of Manufacturing Science and Engineering. 128: 404-415. DOI: 10.1115/1.2118748 |
0.613 |
|
2005 |
Li H, Shin YC. A Comprehensive Dynamic End Milling Simulation Model Journal of Manufacturing Science and Engineering. 128: 86-95. DOI: 10.1115/1.2035694 |
0.628 |
|
2005 |
Xu C, Shin YC. Design of a multilevel fuzzy controller for nonlinear systems and stability analysis Ieee Transactions On Fuzzy Systems. 13: 761-778. DOI: 10.1109/Tfuzz.2005.859308 |
0.439 |
|
2005 |
Wu B, Shin YC. A self-closed thermal model for laser shock peening under the water confinement regime configuration and comparisons to experiments Journal of Applied Physics. 97: 113517. DOI: 10.1063/1.1915537 |
0.615 |
|
2005 |
Pfefferkorn FE, Incropera FP, Shin YC. Heat transfer model of semi-transparent ceramics undergoing laser-assisted machining International Journal of Heat and Mass Transfer. 48: 1999-2012. DOI: 10.1016/J.Ijheatmasstransfer.2004.10.035 |
0.678 |
|
2004 |
Lee CW, Shin YC. Modeling of complex manufacturing processes by hierarchical fuzzy basis function networks with application to grinding processes Journal of Dynamic Systems, Measurement and Control, Transactions of the Asme. 126: 880-890. DOI: 10.1115/1.1849247 |
0.501 |
|
2004 |
Li H, Shin YC. Integrated Dynamic Thermo-Mechanical Modeling of High Speed Spindles, Part 2: Solution Procedure and Validations Journal of Manufacturing Science and Engineering. 126: 159-168. DOI: 10.1115/1.1644546 |
0.597 |
|
2004 |
Li H, Shin YC. Integrated Dynamic Thermo-Mechanical Modeling of High Speed Spindles, Part 1: Model Development Journal of Manufacturing Science and Engineering. 126: 148-158. DOI: 10.1115/1.1644545 |
0.626 |
|
2004 |
Pfefferkorn FE, Shin YC, Tian Y, Incropera FP. Laser-assisted machining of magnesia-partially-stabilized zirconia Journal of Manufacturing Science and Engineering, Transactions of the Asme. 126: 42-51. DOI: 10.1115/1.1644542 |
0.685 |
|
2004 |
Rebro PA, Shin YC, Incropera FP. Design of operating conditions for crackfree laser-assisted machining of mullite International Journal of Machine Tools and Manufacture. 44: 677-694. DOI: 10.1016/J.Ijmachtools.2004.02.011 |
0.412 |
|
2004 |
Li H, Shin YC. Analysis of bearing configuration effects on high speed spindles using an integrated dynamic thermo-mechanical spindle model International Journal of Machine Tools and Manufacture. 44: 347-364. DOI: 10.1016/J.Ijmachtools.2003.10.011 |
0.599 |
|
2003 |
Lee CW, Choi T, Shin YC. Intelligent model-based optimization of the surface grinding process for heat-treated 4140 steel alloys with aluminum oxide grinding wheels Journal of Manufacturing Science and Engineering, Transactions of the Asme. 125: 65-76. DOI: 10.1115/1.1537738 |
0.492 |
|
2003 |
Pfefferkorn FE, Incropera FP, Shin YC. Surface temperature measurement of semi-transparent ceramics by long-wavelength pyrometry Journal of Heat Transfer. 125: 48-56. DOI: 10.1115/1.1527906 |
0.638 |
|
2003 |
Wang ZY, Rajurkar KP, Fan J, Lei S, Shin YC, Petrescu G. Hybrid machining of Inconel 718 International Journal of Machine Tools and Manufacture. 43: 1391-1396. DOI: 10.1016/S0890-6955(03)00134-2 |
0.369 |
|
2003 |
Zhang C, Shin YC. Wear of diamond dresser in laser assisted truing and dressing of vitrified CBN wheels International Journal of Machine Tools and Manufacture. 43: 41-49. DOI: 10.1016/S0890-6955(02)00161-X |
0.396 |
|
2003 |
Lee CW, Shin YC. Construction of fuzzy systems using least-squares method and genetic algorithm Fuzzy Sets and Systems. 137: 297-323. DOI: 10.1016/S0165-0114(02)00344-5 |
0.416 |
|
2002 |
Bowman KJ, Pfefferkorn FE, Shin YC. Recrystallization Textures during Laser-Assisted Machining of Zirconia Ceramics Materials Science Forum. 1669-1674. DOI: 10.4028/Www.Scientific.Net/Msf.408-412.1669 |
0.668 |
|
2002 |
Rebro PA, Shin YC, Incropera FP. Laser-Assisted Machining of Reaction Sintered Mullite Ceramics Journal of Manufacturing Science and Engineering. 124: 875-885. DOI: 10.1115/1.1511523 |
0.448 |
|
2002 |
Rao B, Shin YC. ANALYSIS OF THREE-DIMENSIONAL MACHINING USING AN EXTENDED OBLIQUE MACHINING THEORY Machining Science and Technology. 6: 187-213. DOI: 10.1081/Mst-120005956 |
0.709 |
|
2002 |
Clancy BE, Shin YC. A comprehensive chatter prediction model for face turning operation including tool wear effect International Journal of Machine Tools and Manufacture. 42: 1035-1044. DOI: 10.1016/S0890-6955(02)00036-6 |
0.411 |
|
2002 |
Zhang C, Shin Y. A novel laser-assisted truing and dressing technique for vitrified CBN wheels International Journal of Machine Tools and Manufacture. 42: 825-835. DOI: 10.1016/S0890-6955(02)00014-7 |
0.403 |
|
2001 |
Rao B, Shin YC. Analysis on high-speed face-milling of 7075-T6 aluminum using carbide and diamond cutters International Journal of Machine Tools and Manufacture. 41: 1763-1781. DOI: 10.1016/S0890-6955(01)00033-5 |
0.703 |
|
2000 |
Lei S, Shin YC, Incropera FP. Experimental Investigation of Thermo-Mechanical Characteristics in Laser-Assisted Machining of Silicon Nitride Ceramics Journal of Manufacturing Science and Engineering. 123: 639-646. DOI: 10.1115/1.1380382 |
0.45 |
|
2000 |
Lee CW, Shin YC. Evolutionary modelling and optimization of grinding processes International Journal of Production Research. 38: 2787-2813. DOI: 10.1080/002075400411484 |
0.468 |
|
2000 |
Lei S, Shin YC, Incropera FP. Deformation mechanisms and constitutive modeling for silicon nitride undergoing laser-assisted machining International Journal of Machine Tools and Manufacture. 40: 2213-2233. DOI: 10.1016/S0890-6955(00)00051-1 |
0.417 |
|
2000 |
Rozzi JC, Incropera FP, Shin YC. Transient, three-dimensional heat transfer model for the laser assisted machining of silicon nitride: II. Assessment of parametric effects International Journal of Heat and Mass Transfer. 43: 1425-1437. DOI: 10.1016/S0017-9310(99)00219-7 |
0.436 |
|
2000 |
Rozzi JC, Pfefferkorn FE, Incropera FP, Shin YC. Transient, three-dimensional heat transfer model for the laser assisted machining of silicon nitride: I. Comparison of predictions with measured surface temperature histories International Journal of Heat and Mass Transfer. 43: 1409-1424. DOI: 10.1016/S0017-9310(99)00217-3 |
0.697 |
|
1999 |
Shin YC, Hu S, Choi TJ. Distributed Open Architecture Controller for Machine Tools Sae Transactions. 108: 1022-1028. DOI: 10.4271/1999-01-2278 |
0.311 |
|
1999 |
Jensen SA, Shin YC. Stability Analysis in Face Milling Operations, Part 2: Experimental Validation and Influencing Factors Journal of Manufacturing Science and Engineering-Transactions of the Asme. 121: 606-614. DOI: 10.1115/1.2833076 |
0.333 |
|
1999 |
Jensen SA, Shin YC. Stability Analysis in Face Milling Operations, Part 1: Theory of Stability Lobe Prediction Journal of Manufacturing Science and Engineering-Transactions of the Asme. 121: 600-605. DOI: 10.1115/1.2833075 |
0.374 |
|
1999 |
Lei S, Shin YC, Incropera FP. Material Constitutive Modeling Under High Strain Rates and Temperatures Through Orthogonal Machining Tests Journal of Manufacturing Science and Engineering. 121: 577-585. DOI: 10.1115/1.2833062 |
0.367 |
|
1999 |
Rozzi JC, Pfefferkorn FE, Shin YC, Incropera FP. Experimental Evaluation of the Laser Assisted Machining of Silicon Nitride Ceramics Journal of Manufacturing Science and Engineering. 122: 666-670. DOI: 10.1115/1.1286556 |
0.676 |
|
1999 |
Rao BC, Shin YC. A comprehensive dynamic cutting force model for chatter prediction in turning International Journal of Machine Tools and Manufacture. 39: 1631-1654. DOI: 10.1016/S0890-6955(99)00007-3 |
0.704 |
|
1999 |
Lei S, Shin Y, Incropera F. Thermo-mechanical modeling of orthogonal machining process by finite element analysis International Journal of Machine Tools and Manufacture. 39: 731-750. DOI: 10.1016/S0890-6955(98)00059-5 |
0.373 |
|
1998 |
Shamine DM, Hong SW, Shin YC. Experimental Identification of Dynamic Parameters of Rolling Element Bearings in Machine Tools Journal of Dynamic Systems, Measurement, and Control. 122: 95-101. DOI: 10.1115/1.482432 |
0.332 |
|
1998 |
Jorgensen BR, Shin YC. Dynamics of Spindle-Bearing Systems at High Speeds Including Cutting Load Effects Journal of Manufacturing Science and Engineering. 120: 387-394. DOI: 10.1115/1.2830138 |
0.362 |
|
1998 |
Coker SA, Oh SJ, Shin YC. In-Process Monitoring of Surface Roughness Utilizing Ultrasound Journal of Manufacturing Science and Engineering. 120: 197-200. DOI: 10.1115/1.2830101 |
0.361 |
|
1998 |
Rozzi JC, Incropera FP, Shin YC. Transient Thermal Response of a Rotating Cylindrical Silicon Nitride Workpiece Subjected to a Translating Laser Heat Source, Part II: Parametric Effects and Assessment of a Simplified Model Journal of Heat Transfer-Transactions of the Asme. 120: 907-915. DOI: 10.1115/1.2825910 |
0.441 |
|
1998 |
Rozzi JC, Pfefferkorn FE, Incropera FP, Shin YC. Transient Thermal Response of a Rotating Cylindrical Silicon Nitride Workpiece Subjected to a Translating Laser Heat Source, Part I: Comparison of Surface Temperature Measurements With Theoretical Results Journal of Heat Transfer. 120: 899-906. DOI: 10.1115/1.2825909 |
0.685 |
|
1998 |
Shin YC, Waters AJ. Journal of Intelligent Manufacturing. 9: 225-234. DOI: 10.1023/A:1008825314863 |
0.345 |
|
1997 |
Novak JW, Shin YC, Incropera FP. Assessment of Plasma Enhanced Machining for Improved Machinability of Inconel 718 Journal of Manufacturing Science and Engineering. 119: 125-129. DOI: 10.1115/1.2836550 |
0.357 |
|
1997 |
Jorgensen BR, Shin YC. Dynamics of Machine Tool Spindle/Bearing Systems Under Thermal Growth Journal of Tribology. 119: 875-882. DOI: 10.1115/1.2833899 |
0.38 |
|
1997 |
Leshock CE, Shin YC. Investigation on Cutting Temperature in Turning by a Tool-Work Thermocouple Technique Journal of Manufacturing Science and Engineering-Transactions of the Asme. 119: 502-508. DOI: 10.1115/1.2831180 |
0.379 |
|
1997 |
Rober SJ, Shin YC, Nwokah ODI. A Digital Robust Controller for Cutting Force Control in the End Milling Process Journal of Dynamic Systems Measurement and Control-Transactions of the Asme. 119: 146-152. DOI: 10.1115/1.2801226 |
0.345 |
|
1997 |
Pfefferkorn FE, Rozzi JC, Incropera FP, Shin YC. SURFACE TEMPERATURE MEASUREMENT IN LASER-ASSISTED MACHINING PROCESSES Experimental Heat Transfer. 10: 291-313. DOI: 10.1080/08916159708946549 |
0.684 |
|
1997 |
Shin YC, Waters AJ. A new procedure to determine instantaneous cutting force coefficients for machining force prediction International Journal of Machine Tools and Manufacture. 37: 1337-1351. DOI: 10.1016/S0890-6955(96)00093-4 |
0.346 |
|
1996 |
Elanayar S, Shin YC. Modeling of Tool Forces for Worn Tools: Flank Wear Effects Journal of Manufacturing Science and Engineering. 118: 359-366. DOI: 10.1115/1.2831037 |
0.345 |
|
1996 |
Rober SJ, Shin YC. Control of Cutting Force for End Milling Processes Using an Extended Model Reference Adaptive Control Scheme Journal of Manufacturing Science and Engineering-Transactions of the Asme. 118: 339-347. DOI: 10.1115/1.2831035 |
0.303 |
|
1996 |
Coker SA, Shin YC. In-process control of surface roughness due to tool wear using a new ultrasonic system International Journal of Machine Tools and Manufacture. 36: 411-422. DOI: 10.1016/0890-6955(95)00057-7 |
0.366 |
|
1996 |
Oh SJ, Shin YC, Furgason ES. Measurement and characterization of milled surface profiles using ultrasonic waves Measurement: Journal of the International Measurement Confederation. 17: 59-72. DOI: 10.1016/0263-2241(96)00008-5 |
0.344 |
|
1995 |
Shin YC, Oh SJ, Coker SA. Surface Roughness Measurement by Ultrasonic Sensing for In-Process Monitoring Journal of Engineering For Industry. 117: 439-447. DOI: 10.1115/1.2804352 |
0.333 |
|
1995 |
Elanayar S, Shin YC. Robust Tool Wear Estimation With Radial Basis Function Neural Networks Journal of Dynamic Systems, Measurement, and Control. 117: 459-467. DOI: 10.1115/1.2801101 |
0.379 |
|
1995 |
Rober SJ, Shin YC. Modeling and control of cnc machines using a PC-based open architecture controller Mechatronics. 5: 401-420. DOI: 10.1016/0957-4158(95)00009-T |
0.323 |
|
1994 |
Chen CH, Wang KW, Shin YC. An Integrated Approach Toward the Dynamic Analysis of High-Speed Spindles: Part I—System Model Journal of Vibration and Acoustics. 116: 506-513. DOI: 10.1115/1.2930456 |
0.359 |
|
1992 |
Shin YC. Bearing Nonlinearity and Stability Analysis in High Speed Machining Journal of Engineering For Industry. 114: 23-30. DOI: 10.1115/1.2899755 |
0.303 |
|
1992 |
Shin YC, Joo YS. Optimization of machining conditions with practical constraints International Journal of Production Research. 30: 2907-2919. DOI: 10.1080/00207549208948198 |
0.313 |
|
1992 |
Shin YC, Wei Y. A statistical analysis of positional errors of a multiaxis machine tool Precision Engineering-Journal of the International Societies For Precision Engineering and Nanotechnology. 14: 139-146. DOI: 10.1016/0141-6359(92)90002-E |
0.351 |
|
1991 |
Shin YC, Chin H, Brink MJ. Characterization of CNC machining centers Journal of Manufacturing Systems. 10: 407-421. DOI: 10.1016/0278-6125(91)90058-A |
0.339 |
|
1991 |
Shin YC, Wang KW. Design of an optimal damper to minimize the vibration of machine tool structures subject to random excitation Engineering With Computers. 7: 199-208. DOI: 10.1007/Bf01206362 |
0.324 |
|
1990 |
Shin YC. System Identification of Multivariate Systems With Feedback Journal of Dynamic Systems, Measurement, and Control. 112: 283-291. DOI: 10.1115/1.2896137 |
0.315 |
|
1989 |
Shin YC, Eman KF, Wu SM. Experimental Complex Modal Analysis of Machine Tool Structures Journal of Engineering For Industry. 111: 116-124. DOI: 10.1115/1.3188740 |
0.324 |
|
Show low-probability matches. |