Year |
Citation |
Score |
2018 |
Huang E, Lam T, Chang I, Hong W, Lin T, Su C, Liaw P, Santodonato L, Jayant J, Fine M. Plasticity Enhancement by Fe-Addition on NiAl Alloy: A Synchrotron X-ray Diffraction Mapping and Molecular Dynamics Simulation Study Quantum Beam Science. 2: 18. DOI: 10.3390/QUBS2030018 |
0.358 |
|
2018 |
Gross CT, Isheim D, Vaynman S, Fine ME, Chung Y. Design and Development of Lightly Alloyed Ferritic Fire-Resistant Structural Steels Metallurgical and Materials Transactions A. 50: 209-219. DOI: 10.1007/S11661-018-4985-5 |
0.485 |
|
2016 |
Kapoor M, Isheim D, Vaynman S, Fine ME, Chung YW. Effects of increased alloying element content on NiAl-type precipitate formation, loading rate sensitivity, and ductility of Cu- and NiAl-precipitation-strengthened ferritic steels Acta Materialia. 104: 166-171. DOI: 10.1016/J.Actamat.2015.11.041 |
0.488 |
|
2015 |
Song G, Sun Z, Li L, Xu X, Rawlings M, Liebscher CH, Clausen B, Poplawsky J, Leonard DN, Huang S, Teng Z, Liu CT, Asta MD, Gao Y, Dunand DC, ... ... Fine ME, et al. Ferritic Alloys with Extreme Creep Resistance via Coherent Hierarchical Precipitates. Scientific Reports. 5: 16327. PMID 26548303 DOI: 10.1038/Srep16327 |
0.597 |
|
2015 |
Yao Y, Wang Y, Keer LM, Fine ME. An analytical method to predict electromigration-induced finger-shaped void growth in SnAgCu solder interconnect Scripta Materialia. 95: 7-10. DOI: 10.1016/J.Scriptamat.2014.08.028 |
0.36 |
|
2015 |
Qiao JC, Wang YJ, Pelletier JM, Keer LM, Fine ME, Yao Y. Characteristics of stress relaxation kinetics of La60Ni15Al25 bulk metallic glass Acta Materialia. 98: 43-50. DOI: 10.1016/J.Actamat.2015.07.020 |
0.416 |
|
2015 |
Yao Y, He X, Keer LM, Fine ME. A continuum damage mechanics-based unified creep and plasticity model for solder materials Acta Materialia. 83: 160-168. DOI: 10.1016/J.Actamat.2014.09.051 |
0.409 |
|
2014 |
Kapoor M, Isheim D, Ghosh G, Vaynman S, Fine ME, Chung YW. Aging characteristics and mechanical properties of 1600 MPa body-centered cubic Cu and B2-NiAl precipitation-strengthened ferritic steel Acta Materialia. 73: 56-74. DOI: 10.1016/J.Actamat.2014.03.051 |
0.507 |
|
2014 |
Yablinsky CA, Tippey KE, Vaynman S, Anderoglu O, Fine ME, Chung YW, Speer JG, Findley KO, Dogan N, Jablonski PD, Maloy SA, Hackenberg RE, Clarke AJ, Clarke KD. Concepts for the Development of Nanoscale Stable Precipitation-Strengthened Steels Manufactured by Conventional Methods Jom. 66: 2467-2475. DOI: 10.1007/S11837-014-1204-8 |
0.499 |
|
2013 |
Sun Z, Liebscher CH, Huang S, Teng Z, Song G, Wang G, Asta M, Rawlings M, Fine ME, Liaw PK. New design aspects of creep-resistant NiAl-strengthened ferritic alloys Scripta Materialia. 68: 384-388. DOI: 10.1016/J.Scriptamat.2012.10.040 |
0.759 |
|
2013 |
Yao Y, Fry J, Fine ME, Keer LM. The Wiedemann-Franz-Lorenz relation for lead-free solder and intermetallic materials Acta Materialia. 61: 1525-1536. DOI: 10.1016/J.Actamat.2012.11.030 |
0.397 |
|
2012 |
Yao Y, Fry J, Fine M, Keer L. Numerical analysis to lead free solder/intermetallic interconnect with application of wiedemann-franz-lorenz relation Asme International Mechanical Engineering Congress and Exposition, Proceedings (Imece). 3: 1275-1284. DOI: 10.1115/IMECE2012-88634 |
0.345 |
|
2012 |
Fiedler B, Fine M, Kao K, Keer L. Monitoring fatigue cracking in interconnects in a ball grid array by measuring electrical resistance Journal of Electronic Packaging, Transactions of the Asme. 134. DOI: 10.1115/1.4006708 |
0.428 |
|
2011 |
Zhang ZW, Liu CT, Guo S, Cheng JL, Chen G, Fujita T, Chen MW, Chung YW, Vaynman S, Fine ME, Chin BA. Boron effects on the ductility of a nano-cluster-strengthened ferritic steel Materials Science and Engineering A. 528: 855-859. DOI: 10.1016/J.Msea.2010.10.058 |
0.45 |
|
2011 |
Vaynman S, Fine ME, Chung YW, Bhat SP, Hahin C. Low-carbon Cu precipitation-strengthened steel International Symposium On the Recent Developments in Plate Steels. 181-188. |
0.367 |
|
2010 |
Lee WJ, Chia WJ, Wang J, Chen Y, Vaynman S, Fine ME, Chung YW. Role of surfaces and interfaces in controlling the mechanical properties of metallic alloys. Langmuir : the Acs Journal of Surfaces and Colloids. 26: 16254-60. PMID 20527827 DOI: 10.1021/La101361N |
0.541 |
|
2010 |
Teng ZK, Miller MK, Ghosh G, Liu CT, Huang S, Russell KF, Fine ME, Liaw PK. Characterization of nanoscale NiAl-type precipitates in a ferritic steel by electron microscopy and atom probe tomography Scripta Materialia. 63: 61-64. DOI: 10.1016/J.Scriptamat.2010.03.013 |
0.547 |
|
2010 |
Yao Y, Keer LM, Fine ME. Modeling the failure of intermetallic/solder interfaces Intermetallics. 18: 1603-1611. DOI: 10.1016/J.Intermet.2010.04.016 |
0.464 |
|
2010 |
Teng ZK, Liu CT, Ghosh G, Liaw PK, Fine ME. Effects of Al on the microstructure and ductility of NiAl-strengthened ferritic steels at room temperature Intermetallics. 18: 1437-1443. DOI: 10.1016/J.Intermet.2010.03.026 |
0.59 |
|
2010 |
Fine ME, Vaynman S, Isheim D, Chung YW, Bhat SP, Hahin CH. A new paradigm for designing high-fracture-energy steels Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 41: 3318-3325. DOI: 10.1007/S11661-010-0485-Y |
0.494 |
|
2010 |
Yao Y, Vaynman S, Keer LM, Fine ME. Experimental and micromechanics analysis on fatigue crack propagation behavior in Sn-Ag eutectic solder Fatigue of Materials: Advances and Emergences in Understanding, Held During Materials Science and Technology 2010, Ms and T'10. 19-28. DOI: 10.1002/9781118013373.ch2 |
0.381 |
|
2010 |
Yao Y, Keer LM, Fine ME. Phase transformation theory applied to predict fatigue crack propagation in solid materials Fatigue of Materials: Advances and Emergences in Understanding, Held During Materials Science and Technology 2010, Ms and T'10. 289-298. DOI: 10.1002/9781118013373.ch18 |
0.391 |
|
2010 |
Yao Y, Fiedler BA, Keer LM, Fine ME. Phase transformation in fatigue fracture of lead free solder interconnects Materials Science and Technology Conference and Exhibition 2010, Ms and T'10. 1: 614-622. |
0.797 |
|
2009 |
Yao Y, Fiedler BA, Keer LM, Fine ME. Fatigue crack propagation behavior of Sn-Ag-Cu solder interconnects Ieee Transactions On Components and Packaging Technologies. 32: 317-324. DOI: 10.1109/Tcapt.2009.2013201 |
0.806 |
|
2009 |
Yao Y, Keer LM, Fine ME. Electromigration effect on pancake type void propagation near the interface of bulk solder and intermetallic compound Journal of Applied Physics. 105. DOI: 10.1063/1.3088946 |
0.41 |
|
2009 |
Vaynman S, Chung YW, Fine M, Asfahani R. Effect of Ti on charpy fracture energy and other mechanical properties of ASTM A 710 grade B Cu-precipitation-strengthened steel Materials Science and Technology Conference and Exhibition 2009, Ms and T'09. 3: 1625-1632. |
0.383 |
|
2008 |
Hsieh P, Fine ME, Wang J, Ghosh G, Chung YW, Crawford M. Bismuth lubrication of rail-armature interface 2007 Proceedings of the Asme/Stle International Joint Tribology Conference, Ijtc 2007. 1045-1046. DOI: 10.1115/IJTC2007-44300 |
0.261 |
|
2008 |
Isheim D, Vaynman S, Fine ME, Seidman DN. Copper-precipitation hardening in a non-ferromagnetic face-centered cubic austenitic steel Scripta Materialia. 59: 1235-1238. DOI: 10.1016/J.Scriptamat.2008.07.045 |
0.493 |
|
2008 |
Yao Y, Vaynman S, Keer LM, Fine ME. Energy-based micromechanics analysis on fatigue crack propagation behavior in Sn-Ag eutectic solder Journal of Electronic Materials. 37: 339-346. DOI: 10.1007/S11664-007-0356-5 |
0.508 |
|
2008 |
Vaynman S, Isheim D, Kolli RP, Bhat SP, Seidman DN, Fine ME. High-strength low-carbon ferritic steel containing Cu-Fe-Ni-Al-Mn precipitates Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 39: 363-373. DOI: 10.1007/S11661-007-9417-X |
0.767 |
|
2007 |
Isheim D, Fine M, Seidman D. Precipitate Size Distributions and Compositions of Cu-rich Precipitates in an Fe(Cu) Alloy Studied by Local-Electrode Atom-Probe (LEAP) Tomography Microscopy and Microanalysis. 13. DOI: 10.1017/S1431927607078725 |
0.449 |
|
2007 |
Fine ME, Bhat SP. A model of fatigue crack nucleation in single crystal iron and copper Materials Science and Engineering A. 468: 64-69. DOI: 10.1016/J.Msea.2006.09.127 |
0.471 |
|
2007 |
Fine ME, Liu JZ, Asta MD. An unsolved mystery: The composition of bcc Cu alloy precipitates in bcc Fe and steels Materials Science and Engineering A. 463: 271-274. DOI: 10.1016/J.Msea.2006.07.164 |
0.459 |
|
2007 |
Ghosh G, Vaynman S, Asta M, Fine ME. Stability and elastic properties of L12-(Al,Cu)3(Ti,Zr) phases: Ab initio calculations and experiments Intermetallics. 15: 44-54. DOI: 10.1016/J.Intermet.2006.03.003 |
0.479 |
|
2007 |
Yao Y, Fine ME, Keer LM. An energy approach to predict fatigue crack propagation in metals and alloys International Journal of Fracture. 146: 149-158. DOI: 10.1007/S10704-007-9156-4 |
0.481 |
|
2006 |
Vaynman S, Fine ME, Lee S, Espinosa HD. Effect of strain rate and temperature on mechanical properties and fracture mode of high strength precipitation hardened ferritic steels Scripta Materialia. 55: 351-354. DOI: 10.1016/J.Scriptamat.2006.04.029 |
0.484 |
|
2006 |
Isheim D, Kolli RP, Fine ME, Seidman DN. An atom-probe tomographic study of the temporal evolution of the nanostructure of Fe-Cu based high-strength low-carbon steels Scripta Materialia. 55: 35-40. DOI: 10.1016/J.Scriptamat.2006.02.040 |
0.749 |
|
2006 |
Isheim D, Gagliano MS, Fine ME, Seidman DN. Interfacial segregation at Cu-rich precipitates in a high-strength low-carbon steel studied on a sub-nanometer scale Acta Materialia. 54: 841-849. DOI: 10.1016/J.Actamat.2005.10.023 |
0.782 |
|
2005 |
Fine ME, Voorhees PW. On the evolving curriculum in materials science & engineering Daedalus. 134: 134-136. DOI: 10.1162/0011526053887400 |
0.3 |
|
2005 |
Fine ME, Isheim D. Origin of copper precipitation strengthening in steel revisited Scripta Materialia. 53: 115-118. DOI: 10.1016/J.Scriptamat.2005.02.034 |
0.472 |
|
2004 |
Vaynman S, Ghosh G, Fine ME. Some fundamental issues in the use of Zn-containing lead-free solders for electronic packaging Materials Transactions. 45: 630-636. DOI: 10.2320/Matertrans.45.630 |
0.456 |
|
2004 |
Gagliano MS, Fine ME. Characterization of the nucleation and growth behavior of copper precipitates in low-carbon steels Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 35: 2323-2329. DOI: 10.1007/S11661-006-0212-X |
0.792 |
|
2004 |
Vaynman S, Isheim D, Fine ME, Seidman DN, Bhat SP. Recent advances in high-strength, low-carbon, precipitation-strengthened ferritic steels Materials Science and Technology. 1: 525-530. |
0.435 |
|
2004 |
Vaynman S, Fine ME, Bhat SP. High-strength, low-carbon, ferritic, copper-precipitation-strengthening steels for tank car applications Materials Science and Technology. 1: 417-421. |
0.384 |
|
2003 |
Gagliano RA, Fine ME. Thickening Kinetics of Interfacial Cu 6Sn 5 and Cu 3Sn Layers during Reaction of Liquid Tin with Solid Copper Journal of Electronic Materials. 32: 1441-1447. DOI: 10.1007/S11664-003-0113-3 |
0.746 |
|
2003 |
Fine ME, Tongen A, Gagliano MS. Interaction of coherent nanoscale precipitates with screw dislocations to lower the peierls stress in low carbon steels Tms Annual Meeting. 229-234. |
0.781 |
|
2003 |
Faber K, Fine M, King W, Liaw P, Mori B, Weertman J. TMS Annual Meeting: Preface Tms Annual Meeting. ix-x. |
0.191 |
|
2002 |
McCabe RJ, Fine ME. High creep resistance tin-based alloys for soldering applications Journal of Electronic Materials. 31: 1276-1282. DOI: 10.1007/S11664-002-0021-Y |
0.691 |
|
2002 |
Kang JS, Gagliano RA, Ghosh G, Fine ME. Isothermal solidification of Cu/Sn diffusion couples to form thin-solder joints Journal of Electronic Materials. 31: 1238-1243. DOI: 10.1007/S11664-002-0015-9 |
0.746 |
|
2002 |
Gagliano RA, Ghosh G, Fine ME. Nucleation kinetics of Cu6Sn5 by reaction of molten tin with a copper substrate Journal of Electronic Materials. 31: 1195-1202. DOI: 10.1007/S11664-002-0010-1 |
0.75 |
|
2002 |
McCabe RJ, Fine ME. Unexpected transient creep behavior of tin alloys strengthened by high volume fractions of SbSn Metallurgical and Materials Transactions A. 33: 575-580. DOI: 10.1007/S11661-002-0119-0 |
0.667 |
|
2002 |
McCabe RJ, Fine ME. Creep of tin, Sb-solution-strengthened tin, and SbSn-precipitate-strengthened tin Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 33: 1531-1539. DOI: 10.1007/S11661-002-0075-8 |
0.686 |
|
2002 |
Vaynman S, Fine ME, Asfahani RI, Bormet DM, Hahin C. High performance copper-precipitation-hardened steel Microalloyed Steels 2002. 43-48. |
0.341 |
|
2001 |
Stolkarts V, Keer LM, Fine ME. Constitutive and cyclic damage model of 63sn-37pb solder Journal of Electronic Packaging, Transactions of the Asme. 123: 351-355. DOI: 10.1115/1.1407825 |
0.403 |
|
2001 |
Bhat SP, Fine ME. Fatigue crack nucleation in iron and a high strength low alloy steel Materials Science and Engineering A. 314: 90-96. DOI: 10.1016/S0921-5093(00)01918-3 |
0.49 |
|
2001 |
Gagliano MS, Fine ME. Precipitation kinetics of niobium carbide and copper in a low carbon, chromium-free steel Calphad: Computer Coupling of Phase Diagrams and Thermochemistry. 25: 207-216. DOI: 10.1016/S0364-5916(01)00043-8 |
0.794 |
|
2001 |
Gagliano RA, Fine ME. Growth of η phase scallops and whiskers in liquid tin-solid copper reaction couples Jom. 53: 33-38. DOI: 10.1007/S11837-001-0100-1 |
0.736 |
|
2000 |
Fine ME. Phase transformation theory applied to elevated temperature fatigue Scripta Materialia. 42: 1007-1012. DOI: 10.1016/S1359-6462(00)00319-5 |
0.47 |
|
2000 |
Seniw ME, Conley JG, Fine ME. The effect of microscopic inclusion locations and silicon segregation on fatigue lifetimes of aluminum alloy A356 castings Materials Science and Engineering A. 285: 43-48. DOI: 10.1016/S0921-5093(00)00663-8 |
0.754 |
|
2000 |
McCabe RJ, Fine ME. The creep properties of precipitation-strengthened tin-based alloys Jom. 52: 33-35. DOI: 10.1007/S11837-000-0146-5 |
0.485 |
|
2000 |
Vaynman S, Fine ME. Flux development for lead-free solders containing zinc Journal of Electronic Materials. 29: 1160-1163. DOI: 10.1007/S11664-000-0007-6 |
0.433 |
|
2000 |
Loomans ME, Fine ME. Tin-silver-copper eutectic temperature and composition Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 31: 1155-1162. DOI: 10.1007/S11661-000-0111-5 |
0.477 |
|
2000 |
McCabe RJ, Fine ME. Creep properties of precipitation-strengthened tin-based alloys Jom. 52: 33-35. |
0.649 |
|
1999 |
Ghosh G, Vaynman S, Fine ME, Hsu SM. Microstructure and ambient properties of a Sialon composite prepared by hot pressing and reactive sintering of β-Si3N4 coated with Al2O3 Journal of Materials Research. 14: 881-890. DOI: 10.1557/Jmr.1999.0118 |
0.427 |
|
1999 |
Vaynman S, Fine ME. Development of fluxes for lead-free solders containing zinc Scripta Materialia. 41: 1269-1271. DOI: 10.1016/S1359-6462(99)00302-4 |
0.379 |
|
1999 |
Fine ME, Stolkarts V, Keer LM. Fatigue crack nucleation assisted by thermal activation Materials Science and Engineering A. 272: 5-9. DOI: 10.1016/S0921-5093(99)00456-6 |
0.456 |
|
1999 |
Ghosh G, Vaynman S, Fine ME. Microstructure of a sialon composite prepared by hot pressing and reactive sintering of β-Si3N4 coated with amorphous Al2O3 Ceramics International. 25: 649-659. DOI: 10.1016/S0272-8842(98)00079-0 |
0.421 |
|
1999 |
Stolkarts V, Keer LM, Fine ME. Damage evolution governed by microcrack nucleation with application to the fatigue of 63Sn-37Pb solder Journal of the Mechanics and Physics of Solids. 47: 2451-2468. DOI: 10.1016/S0022-5096(99)00014-9 |
0.441 |
|
1999 |
Vaynman S, Fine ME. High-performance, weatherable, copper-precipitation-hardened steel International Symposium On Steel For Fabricated Structures. 59-66. |
0.389 |
|
1999 |
McCabe RJ, Fine ME. Creep properties of two precipitation strengthened, tin based alloys Proceedings of the Tms Fall Meeting. 97-106. |
0.656 |
|
1999 |
Gagliano RA, Fine ME, Vaynman S, Stolkarts V. Shear testing of solder joints: The effect of various parameters on the maximum shear stress of eutectic tin-lead solder Proceedings of the Tms Fall Meeting. 107-116. |
0.317 |
|
1998 |
McCabe RJ, Fine ME. Athermal and thermally activated plastic flow in low melting temperature solders at small stresses Scripta Materialia. 39: 189-195. DOI: 10.1016/S1359-6462(98)00149-3 |
0.618 |
|
1998 |
Cottle RD, Chen X, Jain RK, Eliezer Z, Rabenberg L, Fine ME. Designing low-thermal-expansivity, high-conductivity alloys in the Cu-Fe-Ni ternary system Jom. 50: 67-69. DOI: 10.1007/S11837-998-0132-X |
0.493 |
|
1998 |
Vaynman S, Ghosh G, Fine ME. Effects of palladium and solder aging on mechanical and fatigue properties of tin-lead eutectic solder Journal of Electronic Materials. 27: 1223-1228. DOI: 10.1007/S11664-998-0073-8 |
0.42 |
|
1997 |
Ghosh G, Vaynman S, Fine ME. A Microstructural Study of Hot Pressed and Reactive Sintered Beta-Silicon Nitride Coated with Alumina Microscopy and Microanalysis. 3: 735-736. DOI: 10.1017/S1431927600010564 |
0.372 |
|
1997 |
Connor ZM, Li W, Fine ME, Achenbach JD. Fatigue crack initiation and growth in riveted specimens: an optical and acoustic microscopic study International Journal of Fatigue. 19: S331-S338. DOI: 10.1016/S0142-1123(97)00046-7 |
0.766 |
|
1997 |
Mavoori H, Chin J, Vaynman S, Moran B, Keer L, Fine M. Creep, stress relaxation, and plastic deformation in Sn-Ag and Sn-Zn eutectic solders Journal of Electronic Materials. 26: 783-790. DOI: 10.1007/S11664-997-0252-Z |
0.433 |
|
1997 |
Mavoori H, Chin J, Vaynman S, Moran B, Keer L, Fine M. Creep, stress relaxation, and plastic deformation in Sn-Ag and Sn-Zn eutectic solders Journal of Electronic Materials. 26: 783-790. DOI: 10.1007/s11664-997-0252-z |
0.322 |
|
1997 |
Vaynman S, Guico RS, Fine ME, Manganello SJ. Estimation of atmospheric corrosion of high-strength, low-alloy steels Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 28: 1274-1276. DOI: 10.1007/S11661-997-0294-0 |
0.428 |
|
1997 |
Caracostas CA, Chiou WA, Fine ME, Cheng HS. Tribological properties of aluminum alloy matrix TiB2 composite prepared by in situ processing Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 28: 491-502. DOI: 10.1007/S11661-997-0150-2 |
0.459 |
|
1997 |
Ghosh G, Miyake J, Fine ME. The systems-based design of high-strength, high-conductivity alloys Jom. 49: 56-60. DOI: 10.1007/Bf02914659 |
0.42 |
|
1997 |
Vaynman S, Uslander IJ, Fine ME. High-strength, weldable, air-cooled, copper-precipitation-hardened steel Mechanical Working and Steel Processing Conference Proceedings. 1183-1190. |
0.358 |
|
1997 |
Fine ME, Liaw PK. Commentary on the Paris equation Proceedings of the Tms Fall Meeting. 25-40. |
0.348 |
|
1997 |
Seniw ME, Fine ME, Chen EY, Meshii M, Gray J. Relation of defect size and location to fatigue failure in Al alloy A356 cast specimens Proceedings of the Tms Fall Meeting. 371-379. |
0.4 |
|
1997 |
Foley RP, Fine ME, Bhat SK. Bake hardening steels: Toward improved formability and strength Mechanical Working and Steel Processing Conference Proceedings. 653-666. |
0.35 |
|
1997 |
Chin J, Mavoori H, Fine M, Moran B, Keer LM. Mechanical properties database and fatigue lifetime prediction for solders National Electronic Packaging and Production Conference-Proceedings of the Technical Program (West and East). 1: 15-23. |
0.291 |
|
1996 |
Miyake J, Ghosh G, Fine ME. Design of high-strength, high-conductivity alloys Mrs Bulletin. 21: 13-18. DOI: 10.1557/S0883769400046005 |
0.451 |
|
1996 |
Fine ME. Phase transformations in condensed systems revisited: Industrial applications Metallurgical and Materials Transactions A. 27: 2397-2418. DOI: 10.1007/Bf02652334 |
0.333 |
|
1996 |
McGuire SM, Fine ME. Prediction of fatigue crack formation in 304 stainless steel Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 27: 1267-1271. DOI: 10.1007/Bf02649863 |
0.471 |
|
1996 |
Vaynman S, Fine ME, Ghosh G, Bhat SP. Copper precipitation hardened, high strength, weldable steel Proceedings of the Materials Engineering Conference. 2: 1551-1560. |
0.336 |
|
1996 |
Vaynman S, Ghosh G, Fine ME, Edwards DD, Hsu SM. Interface engineered silicon nitride with improved toughness and wear resistance Proceedings of the 1995 9th International Conference On Surface Modification Technologies. 327-335. |
0.309 |
|
1996 |
Vaynman S, Mavoori H, Chin J, Fine ME, Moran B, Keer LM. Stress management and reliability assessment in electronic packaging National Electronic Packaging and Production Conference-Proceedings of the Technical Program (West and East). 3: 1711-1726. |
0.239 |
|
1995 |
Mavoori H, Vaynman S, Chin J, Moran B, Keer LM, Fine ME. Mechanical behavior of eutectic Sn-Ag and Sn-Zn solders Materials Research Society Symposium - Proceedings. 390: 161-175. DOI: 10.1557/Proc-390-161 |
0.426 |
|
1995 |
Chi F, Schmerling M, Eliezer Z, Marcus HL, Fine ME. Preparation of Cu-TiN alloy by external nitridation in combination with mechanical alloying Materials Science and Engineering A. 190: 181-186. DOI: 10.1016/0921-5093(95)09617-5 |
0.812 |
|
1995 |
McGuire SM, Fine ME, Achenbach JD. Crack detection by resonant frequency measurements Metallurgical and Materials Transactions A. 26: 1123-1127. DOI: 10.1007/Bf02670609 |
0.43 |
|
1995 |
Vaynman S, Mavoori H, Fine ME. Comparison of isothermal fatigue of lead-free solders with lead-tin solders American Society of Mechanical Engineers, Eep. 10: 657-662. |
0.352 |
|
1994 |
Haiyan L, Fine ME, Cheng HS, Geiger AL. Lubricated rolling wear of SiC-whisker-reinforced Al2O3 composites against M2 tool steel Journal of the American Ceramic Society. 77: 179-185. DOI: 10.1111/J.1151-2916.1994.Tb06974.X |
0.427 |
|
1994 |
Wang Q, Cheng HS, Caracostas CA, Fine ME. Wear of aluminum-alloy matrix composites in lubricated conformal contact with case hardened steel Tribology Transactions. 37: 735-742. DOI: 10.1080/10402009408983353 |
0.428 |
|
1994 |
Wang Q, Cheng HS, Fine ME. Frictional behaviors of some nitrogen ceramics in conformal contact with tin coated Al-si alloy, steel and MMC Tribology Transactions. 37: 587-593. DOI: 10.1080/10402009408983333 |
0.457 |
|
1994 |
Wang Q, Cheng HS, Fine ME. Wear of Tin Coating and Al-Si Alloy Substrate Against Carburized Steel Under Mixed Lubrication Tribology Transactions. 37: 277-284. DOI: 10.1080/10402009408983293 |
0.429 |
|
1994 |
Xu ZR, Chawla KK, Mitra R, Fine ME. Effect of particle size on the thermal expansion of TiC Al XD™ composites Scripta Metallurgica Et Materiala. 31: 1525-1530. DOI: 10.1016/0956-716X(94)90068-X |
0.378 |
|
1994 |
Ghosh G, Loomans M, Fine ME. An investigation of phase equilibria of the Bi-Sb-Sn system Journal of Electronic Materials. 23: 619-623. DOI: 10.1007/Bf02653347 |
0.44 |
|
1994 |
Loomans ME, Vaynman S, Ghosh G, Fine ME. Investigation of multi-component lead-free solders Journal of Electronic Materials. 23: 741-746. DOI: 10.1007/Bf02651368 |
0.431 |
|
1994 |
Ghosh G, Vaynman S, Fine ME. Microstructural characterization of interface-engineered Si3N4 for improved fracture toughness and wear resistance Proceedings - Annual Meeting, Microscopy Society of America. 624-625. |
0.316 |
|
1994 |
Mavoori H, Vaynman S, Chin J, Moran B, Keer LM, Fine ME. Isothermal fatigue lifetime prediction of solder materials American Society of Mechanical Engineers, Applied Mechanics Division, Amd. 195: 165-179. |
0.321 |
|
1994 |
Mitra R, Fine ME, Weertman JR. Effect of deformation and recrystallization on microstructure and interfaces in XD Al/TiC metal matrix composites Proceedings of the Tms Fall Meeting. 199-206. |
0.603 |
|
1994 |
Fine ME, Marcus HL. Materials science and engineering, an educational discipline Annual Review of Materials Science. 24: 1-17. |
0.181 |
|
1993 |
Mitra R, Chiou WA, Fine ME, Weertman JR. Interfaces in as-extruded XD Al/TiC and Al/TiB2 metal matrix composites Journal of Materials Research. 8: 2380-2392. DOI: 10.1557/Jmr.1993.2380 |
0.619 |
|
1993 |
Mitra R, Fine ME, Weertman JR. Chemical reaction strengthening of Al/TiC metal matrix composites by isothermal heat treatment at 913 K Journal of Materials Research. 8: 2370-2379. DOI: 10.1557/Jmr.1993.2370 |
0.608 |
|
1993 |
McGuire S, Fine M, Buck O, Achenbach J. Nondestructive detection of fatigue cracks in PM 304 stainless steel by internal friction and elasticity Journal of Materials Research. 8: 2216-2223. DOI: 10.1557/Jmr.1993.2216 |
0.453 |
|
1993 |
Liu H, Fine ME. Modeling of Grain-Size-Dependent Microfracture-Controlled Sliding Wear in Polycrystalline Alumina Journal of the American Ceramic Society. 76: 2393-2396. DOI: 10.1111/J.1151-2916.1993.Tb07786.X |
0.435 |
|
1993 |
Liu H, Fine ME, Cheng HS, Geiger AL. Lubricated Rolling and Sliding Wear of a SiC-Whisker-Reinforced Si3N4 Composite against M2 Tool Steel Journal of the American Ceramic Society. 76: 105-112. DOI: 10.1111/J.1151-2916.1993.Tb03695.X |
0.383 |
|
1993 |
Fine ME, Mitra R, Chawla KK. Internal stress and work of adhesion Scripta Metallurgica Et Materiala. 29: 221-223. DOI: 10.1016/0956-716X(93)90312-G |
0.33 |
|
1993 |
Schmerling M, Ponnekanti S, Mear S, Yeoh A, Chi F, Fine M, Eliezer Z, Marcus H. Nitridation of niobium alloys: interface effects Materials Science and Engineering: A. 162: 123-129. DOI: 10.1016/0921-5093(90)90036-3 |
0.802 |
|
1992 |
Achenbach JD, Fine ME, Komsky I, McGuire S. Ultrasonic Wave Technique to Assess Cyclic-Load Fatigue Damage in Silicon-Carbide Whisker Reinforced 2124 Aluminum Alloy Composites Astm Special Technical Publications. 241-250. DOI: 10.1520/Stp15351S |
0.442 |
|
1992 |
Guo Q, Cutiongco EC, Keer LM, Fine ME. Thermomechanical Fatigue Life Prediction of 63Sn/37Pb Solder Journal of Electronic Packaging. 114: 145-151. DOI: 10.1115/1.2906411 |
0.416 |
|
1992 |
Pan YM, Fine ME, Cheng HS. Sliding Wear of an Al Alloy SiC Whisker Composite Tribology Transactions. 35: 482-490. DOI: 10.1080/10402009208982146 |
0.464 |
|
1992 |
Vaynman S, Fine M, Jeannotte D. Effect of current on fatigue life of 60Sn-40Pb solder Scripta Metallurgica Et Materialia. 26: 999-1000. DOI: 10.1016/0956-716X(92)90697-D |
0.388 |
|
1992 |
Earvolino PA, Fine ME, Weertman JR, Parameswaran VR. Processing an Al Al3Zr0.25Ti0.75 metal-matrix composite by conventional melting, casting and rolling Scripta Metallurgica Et Materiala. 26: 945-948. DOI: 10.1016/0956-716X(92)90687-A |
0.615 |
|
1992 |
Sawamura I, Fine ME. Plastic deformation behavior of Al67Cr8Ti25 and Al67Cr8 Ti0.9Y0.1)25 intermetallic alloys at elevated temperatures Scripta Metallurgica Et Materialia. 26: 315-318. DOI: 10.1016/0956-716X(92)90193-I |
0.505 |
|
1992 |
Caracostas C, Chiou W, Fine M, Cheng H. Wear mechanisms during lubricated sliding of XD™ metal matrix composites against steel Scripta Metallurgica Et Materialia. 27: 167-172. DOI: 10.1016/0956-716X(92)90107-P |
0.405 |
|
1992 |
Shiram T, Fine M, Chung Y. The application of surface science to fatigue: The role of surface chemistry and surface modification in fatigue crack initiation in silver single crystals Acta Metallurgica Et Materialia. 40: 2769-2780. DOI: 10.1016/0956-7151(92)90347-H |
0.455 |
|
1992 |
Miyake J, Fine M. Electrical conductivity versus strength in a precipitation hardened alloy Acta Metallurgica Et Materialia. 40: 733-741. DOI: 10.1016/0956-7151(92)90015-7 |
0.459 |
|
1991 |
Mitra R, Chiou WA, Weertman JR, Fine ME, Aikin RM. Study Of Interfaces In XDTM Al/TiCp Metal Matrix Composites Mrs Proceedings. 238. DOI: 10.1557/Proc-238-871 |
0.648 |
|
1991 |
Vaynhan S, Fine ME. Isothermal Fatigue of 62Sn–36Pb–2Ag Solder Mrs Proceedings. 226: 3. DOI: 10.1557/Proc-226-3 |
0.44 |
|
1991 |
Liu H, Fine ME, Cheng HS. Tribological Behavior of SiC-Whisker/Al2O3 Composites against Carburized 8620 Steel in Lubricated Sliding Journal of the American Ceramic Society. 74: 2224-2233. DOI: 10.1111/J.1151-2916.1991.Tb08289.X |
0.426 |
|
1991 |
Sriram TS, Fine ME, Chung YW. A flange‐mounted UHV‐compatible axial fatigue apparatus using a piezoelectric actuator Review of Scientific Instruments. 62: 2008-2010. DOI: 10.1063/1.1142354 |
0.394 |
|
1991 |
Miyake J, Fine ME. Two-step ageing of a copper alloy to optimize combination of strength and electrical conductivity Scripta Metallurgica Et Materialia. 25: 1573-1576. DOI: 10.1016/0956-716X(91)90454-9 |
0.437 |
|
1991 |
Miyake J, Fine ME. Electrical resistivity and the Gibbs-Thomson equation Scripta Metallurgica Et Materialia. 25: 191-194. DOI: 10.1016/0956-716X(91)90379-F |
0.303 |
|
1991 |
Mitra R, Chiou WA, Weertman JR, Fine ME, Aikin RM. Relaxation mechanisms at the interfaces in XD™ Al TiCp metal matrix composites Scripta Metallurgica Et Materiala. 25: 2689-2694. DOI: 10.1016/0956-716X(91)90140-V |
0.598 |
|
1991 |
Kim G, Kwon I, Fine ME. The influence of loading methods on fatigue crack initiation in polycrystalline copper at ambient temperature Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 142: 177-182. DOI: 10.1016/0921-5093(91)90656-8 |
0.456 |
|
1991 |
Lawson L, Fine ME, Jeannotte D. Thermomechanical fatigue of a lead alloy Metallurgical Transactions A. 22: 1059-1070. DOI: 10.1007/BF02661099 |
0.43 |
|
1991 |
Berriche R, Fine ME, Jeannotte DA. Environmental and hold time effects on fatigue of low-tin lead-based solder Metallurgical Transactions A. 22: 357-366. DOI: 10.1007/Bf02656804 |
0.432 |
|
1991 |
Lee W, Fine ME, Chung YW. Cyclic surface deformation behaviour of ZrH2-purified iron: Effects of solute carbon, strain amplitude, strain rate and environment Journal of Materials Science. 26: 5793-5798. DOI: 10.1007/Bf01130116 |
0.399 |
|
1990 |
Zubelewicz A, Guo Q, Cutiongco EC, Fine ME, Keer LM. Micromechanical Method to Predict Fatigue Life of Solder Journal of Electronic Packaging. 112: 179-182. DOI: 10.1115/1.2904360 |
0.425 |
|
1990 |
Cutiongco EC, Vaynman S, Fine ME, Jeannotte DA. Isothermal Fatigue of 63Sn-37Pb Solder Journal of Electronic Packaging. 112: 110-114. DOI: 10.1115/1.2904350 |
0.453 |
|
1990 |
Gangopadhyay AK, Janon FB, Fine ME, Cheng HS. Enhanced wear resistance of α-alumina by surface modification with chromia and titania Tribology Transactions. 33: 96-104. DOI: 10.1080/10402009008981935 |
0.456 |
|
1990 |
Vaynman S, Fine ME. Effect of grain boundary failure on fatigue life of high-lead SnPb solder Scripta Metallurgica Et Materialia. 24: 1737-1739. DOI: 10.1016/0956-716X(90)90538-R |
0.404 |
|
1990 |
Pan Y, Fine M, Cheng H. Aging effects on the wear behavior of P/M aluminum alloy SiC particle composites Scripta Metallurgica Et Materialia. 24: 1341-1345. DOI: 10.1016/0956-716X(90)90353-I |
0.438 |
|
1990 |
Sriram T, Fine M, Chung Y. STM and surface analytical study of the effect of environment on fatigue crack initiation in silver single crystals II: Effects of oxygen partial pressure Scripta Metallurgica Et Materialia. 24: 279-284. DOI: 10.1016/0956-716X(90)90256-G |
0.414 |
|
1990 |
Venkataraman G, Sriram T, Fine M, Chung Y. STM and surface analytical study of the effect of environment on fatigue crack initiation in silver single crystals I: Surface chemical effects Scripta Metallurgica Et Materialia. 24: 273-278. DOI: 10.1016/0956-716X(90)90255-F |
0.419 |
|
1990 |
Kwon I, Mura T, Fine M. Eigenstrain analysis of the dislocation structures formed in copper during low temperature fatigue Scripta Metallurgica Et Materialia. 24: 959-962. DOI: 10.1016/0956-716X(90)90145-7 |
0.359 |
|
1990 |
Chen YC, Fine ME, Weertman JR. Microstructural evolution and mechanical properties of rapidly solidified AlZrV alloys at high temperatures Acta Metallurgica Et Materialia. 38: 771-780. DOI: 10.1016/0956-7151(90)90029-G |
0.665 |
|
1990 |
Fine ME, Conley JG. Discussion of "On the free energy of formation of TiC and Al4C3" Metallurgical Transactions A. 21: 2609-2610. DOI: 10.1007/Bf02647010 |
0.464 |
|
1989 |
Zubelewicz A, Berriche R, Keer LM, Fine ME. Lifetime Prediction of Solder Materials Journal of Electronic Packaging. 111: 179-182. DOI: 10.1115/1.3226531 |
0.387 |
|
1989 |
Braza JF, Cheng HS, Fine ME. Silicon Nitride Wear Mechanisms: Rolling and Sliding Contact Tribology Transactions. 32: 439-446. DOI: 10.1080/10402008908981911 |
0.397 |
|
1989 |
Braza JF, Cheng HS, Fine ME, Gangopadhyay AK, Keer LM, Worden RE. Mechanical failure mechanisms in ceramic sliding and rolling contacts Tribology Transactions. 32: 1-8. DOI: 10.1080/10402008908981855 |
0.381 |
|
1989 |
Wang D, Hua H, Fine ME, Cheng HS. Fatigue crack initiation and fracture in 52100 steel Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 118: 113-120. DOI: 10.1016/0921-5093(89)90063-4 |
0.464 |
|
1989 |
Parameswaran VR, Weertman JR, Fine ME. Coarsening behavior of L12 phase in an AlZrTi alloy Scripta Metallurgica. 23: 147-150. DOI: 10.1016/0036-9748(89)90109-9 |
0.611 |
|
1989 |
Kwon IB, Fine ME, Weertman J. Fatigue damage in copper single crystals at room and cryogenic temperatures Acta Metallurgica. 37: 2937-2946. DOI: 10.1016/0001-6160(89)90328-3 |
0.454 |
|
1989 |
Kwon IB, Fine ME, Weertman J. Microstructural studies on the initiation and growth of small fatigue cracks at 298, 77 and 4.2 K in polycrystalline copper Acta Metallurgica. 37: 2927-2936. DOI: 10.1016/0001-6160(89)90327-1 |
0.472 |
|
1989 |
Conley JG, Fine ME, Weertman JR. Effect of lattice disregistry variation on the late stage phase transformation behavior of precipitates in NiAlMo alloys Acta Metallurgica. 37: 1251-1263. DOI: 10.1016/0001-6160(89)90119-3 |
0.798 |
|
1988 |
Gangopadhyay A, Fine M, Cheng H. Reduction in Wear Rate of α-Alumina and Silicon Nitride by Diffusional Surface Modification Mrs Proceedings. 140. DOI: 10.1557/Proc-140-293 |
0.409 |
|
1988 |
Fine M, Bourell D, Eliezer Z, Persad C, Marcus H. Basic principles for selecting phases for high temperature metal matrix composites: Interfacial considerations Scripta Metallurgica. 22: 907-910. DOI: 10.1016/S0036-9748(88)80073-5 |
0.761 |
|
1988 |
Kwon I, Fine M, Mura T. Elastic strain energy analysis of the dislocation structures in fatigue Acta Metallurgica. 36: 2605-2614. DOI: 10.1016/0001-6160(88)90205-2 |
0.404 |
|
1988 |
Calderon HA, Fine ME, Weertman JR. Coarsening and morphology of β′ particles in Fe-Ni-Al-Mo ferritic alloys Metallurgical Transactions A. 19: 1135-1146. DOI: 10.1007/Bf02662573 |
0.644 |
|
1988 |
Lee WJ, Chung YW, Fine ME. Effect of environment and grain size on cyclic deformation and surface hardening of iron Metallurgical Transactions A. 19: 337-344. DOI: 10.1007/Bf02652543 |
0.459 |
|
1988 |
Vayman S, Fine ME, Jeannotte DA. Isothermal fatigue of low tin lead based solder Metallurgical Transactions A. 19: 1051-1059. DOI: 10.1007/Bf02628389 |
0.417 |
|
1987 |
Fine M, Marcus H, Stark J. On the contributions of chemical and surface stress effects to grain boundary segregation Scripta Metallurgica. 21: 1571-1572. DOI: 10.1016/0036-9748(87)90302-4 |
0.274 |
|
1987 |
Braza J, Cheng H, Fine M. Wear of partially stabilized zirconia: Sliding vs. rolling contact Scripta Metallurgica. 21: 1705-1710. DOI: 10.1016/0036-9748(87)90162-1 |
0.315 |
|
1987 |
Chen YC, Fine ME, Weertman JR, Lewis RE. Coarsening behavior of Ll2 structured Al3(Zrx V1-x) precipitates in rapidly solidified AlZrV alloy Scripta Metallurgica. 21: 1003-1008. DOI: 10.1016/0036-9748(87)90143-8 |
0.617 |
|
1986 |
Lee W, Chung Y, Fine ME, Baker JP. Electrohydraulic fatigue apparatus for testing in ultrahigh vacuum and controlled environments Review of Scientific Instruments. 57: 2854-2858. DOI: 10.1063/1.1139055 |
0.394 |
|
1986 |
Fine ME, Chen Y, Conley J, Caputi J. Interface adsorption and ostwald ripening Scripta Metallurgica. 20: 743-744. DOI: 10.1016/0036-9748(86)90503-X |
0.661 |
|
1986 |
Fine M, Stark J, Marcus H. Segregation to grain boundaries, free energy considerations and fracture Scripta Metallurgica. 20: 1619-1620. DOI: 10.1016/0036-9748(86)90406-0 |
0.266 |
|
1986 |
Lin M, Fine M, Mura T. Fatigue crack initiation on slip bands: Theory and experiment Acta Metallurgica. 34: 619-628. DOI: 10.1016/0001-6160(86)90177-X |
0.451 |
|
1986 |
Zedalis MS, Fine ME. Precipitation and ostwald ripening in dilute AI Base-Zr-V alloys Metallurgical Transactions A. 17: 2187-2198. DOI: 10.1007/Bf02645917 |
0.475 |
|
1985 |
Angers LH, Marks LD, Weertman JR, Fine ME. A Quasicrystalline Decagonal Phase in Al-Fe-Ce Mrs Proceedings. 62. DOI: 10.1557/PROC-62-255 |
0.315 |
|
1985 |
Zedalis M, Ghate M, Fine M. Elastic moduli of Al3Zr Scripta Metallurgica. 19: 647-650. DOI: 10.1016/0036-9748(85)90354-0 |
0.342 |
|
1985 |
Kwun SI, Fine ME. Coarsening rate of Β precipitates in Al-11Mg alloy Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 16: 709-713. DOI: 10.1007/Bf02814822 |
0.455 |
|
1985 |
Cooper CV, Fine ME. Fatigue microcrack initiation in polycrystalline alpha-iron with polished and oxidized surfaces Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 16: 641-649. DOI: 10.1007/Bf02814238 |
0.455 |
|
1984 |
Cooper CV, Fine ME. Coffin-manson relation for fatigue crack initiation Scripta Metallurgica. 18: 593-596. DOI: 10.1016/0036-9748(84)90347-8 |
0.43 |
|
1984 |
Calderon HA, Weertman JR, Fine ME. Effect of cyclic plastic deformation on elevated temperature ostwald ripening of an alloy with coherent precipitates Scripta Metallurgica. 18: 587-592. DOI: 10.1016/0036-9748(84)90346-6 |
0.652 |
|
1984 |
Kwun SI, Fine ME. The cyclic hardening of Al3Mg alloy Scripta Metallurgica. 18: 981-984. DOI: 10.1016/0036-9748(84)90273-4 |
0.486 |
|
1984 |
Fine M, Brown L, Marcus H. Elastic constants versus melting temperature in metals Scripta Metallurgica. 18: 951-956. DOI: 10.1016/0036-9748(84)90267-9 |
0.757 |
|
1984 |
Calderon H, Fine M. Coarsening kinetics of coherent NiAl-type precipitates in FeNiAl and FeNiAlMo alloys Materials Science and Engineering. 63: 197-208. DOI: 10.1016/0025-5416(84)90121-6 |
0.387 |
|
1984 |
Horng J, Fine M. Near-threshold fatigue crack propagation rates of dual-phase steels Materials Science and Engineering. 67: 185-195. DOI: 10.1016/0025-5416(84)90050-8 |
0.368 |
|
1983 |
Horng J, Fine M. Near threshold mixed mode I–II fatigue crack propagation: Parallel superposition model Scripta Metallurgica. 17: 1427-1430. DOI: 10.1016/0036-9748(83)90369-1 |
0.411 |
|
1983 |
Zedalis M, Fine M. Lattice parameter variation of Al3 (Ti, V, Zr, Hf) in Al-2 AT.% (Ti, V, Zr, Hf) alloys Scripta Metallurgica. 17: 1247-1251. DOI: 10.1016/0036-9748(83)90293-4 |
0.429 |
|
1983 |
Hirose S, Fine ME. Fatigue crack initiation and microcrack propagation in X7091 type aluminum P/M alloys Metallurgical Transactions A. 14: 1189-1197. DOI: 10.1007/Bf02670456 |
0.503 |
|
1983 |
Hirose S, Fine ME. Fatigue Crack Initiation and Microcrack Propagation in X7091 Type Aluminum P/M Alloys Metallurgical Transactions A. 14: 1189-1197. DOI: 10.1007/BF02659866 |
0.384 |
|
1982 |
Lin G, Fine M. Effect of grain size and cold work on the near threshold fatigue crack propagation rate and crack closure in iron Scripta Metallurgica. 16: 1249-1254. DOI: 10.1016/0036-9748(82)90477-X |
0.446 |
|
1982 |
Zedalis M, Fine M. The effect of aluminum oxide particles and precipitate type on near-threshold fatigue crack propagation rate in P/M 7xxx aluminum alloys Scripta Metallurgica. 16: 1411-1414. DOI: 10.1016/0036-9748(82)90438-0 |
0.486 |
|
1982 |
Zedalis M, Filler L, Fine M. Effect of purity and dispersoid type on near threshold fatigue crack growth rates in AlZnMgCu alloys Scripta Metallurgica. 16: 471-474. DOI: 10.1016/0036-9748(82)90175-2 |
0.488 |
|
1982 |
Tsunekawa S, Fine M. Lattice parameters of Al3 (ZrxTi1−x) vs. x in Al-2 at.% (Ti + Zr) alloys Scripta Metallurgica. 16: 391-392. DOI: 10.1016/0036-9748(82)90157-0 |
0.34 |
|
1982 |
Sunwoo H, Fine ME, Meshii M, Stone DH. Cyclic deformation of pearlitic eutectoid rail steel Metallurgical Transactions A. 13: 2035-2047. DOI: 10.1007/Bf02645949 |
0.454 |
|
1982 |
Anton DL, Fine ME. Cyclic hardening of an Ni-14.4 at. pct AI alloy containing coherent precipitates Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 13: 1187-1198. DOI: 10.1007/Bf02645501 |
0.51 |
|
1982 |
Kim YH, Fine ME. Fatigue crack initiation and strain-controlled fatigue of some high strength low alloy steels Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 13: 59-72. DOI: 10.1007/Bf02642416 |
0.494 |
|
1981 |
Hsieh N, Fine ME. The Lorenz ratio and electron transport properties of NbO Journal of Applied Physics. 52: 2876-2883. DOI: 10.1063/1.329021 |
0.199 |
|
1981 |
Fine M. Elastic moduli of two phase aluminum alloys Scripta Metallurgica. 15: 523-524. DOI: 10.1016/0036-9748(81)90195-2 |
0.391 |
|
1981 |
Liaw PK, Kwun SI, Fine ME. Plastic work of fatigue crack propagation in steels and aluminum alloys Metallurgical Transactions A. 12: 49-55. DOI: 10.1007/Bf02648507 |
0.595 |
|
1981 |
Liaw PK, Fine ME. Fatigue crack propagation in 99.99+ and 1100 aluminum at 298 and 77 k Metallurgical Transactions A. 12: 1927-1937. DOI: 10.1007/Bf02643805 |
0.553 |
|
1981 |
McKittrick J, Liaw PK, Kwun SI, Fine ME. Threshold for fatigue macrocrack propagation in some aluminum alloys Metallurgical and Materials Transactions A. 12: 1535-1539. DOI: 10.1007/Bf02643701 |
0.578 |
|
1981 |
Izumi Y, Fine ME, Mura T. Energy considerations in fatigue crack propagation International Journal of Fracture. 17: 15-25. DOI: 10.1007/Bf00043118 |
0.464 |
|
1980 |
LIAW PK, FINE ME, DAVIDSON DL. COMPARISON OF PLASTIC WORK OF FATIGUE CRACK PROPAGATION IN LOW CARBON STEEL MEASURED BY STRAIN-GAGES AND ELECTRON CHANNELING Fatigue & Fracture of Engineering Materials and Structures. 3: 59-74. DOI: 10.1111/j.1460-2695.1980.tb01104.x |
0.482 |
|
1980 |
Kwun SI, Fine ME. Dependence of cyclic plastic work of fatigue crack propagation on ΔK in MA87 A1 P/M alloy Scripta Metallurgica. 14: 155-158. DOI: 10.1016/0036-9748(80)90145-3 |
0.465 |
|
1980 |
Fine ME. Fatigue resistance of metals Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 11: 365-379. DOI: 10.1007/Bf02654560 |
0.374 |
|
1979 |
Izumi Y, Fine ME. Role of plastic work in fatigue crack propagation in metals Engineering Fracture Mechanics. 11: 791-804. DOI: 10.1016/0013-7944(79)90137-1 |
0.496 |
|
1979 |
Kim Y, Fine M, Mura T. Plastic yielding at the tip of a blunt notch during static and fatigue loading Engineering Fracture Mechanics. 11: 653-660. DOI: 10.1016/0013-7944(79)90126-7 |
0.442 |
|
1979 |
Kung CY, Fine ME. Fatigue Crack initiation and microcrack growth in 2024-T4 and 2124-T4 aluminum alloys Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 10: 603-610. DOI: 10.1007/Bf02658324 |
0.484 |
|
1978 |
Fine ME. Mining and Metallurgy in the Greek and Roman World. By J. F. Healy. New York: Thames and Hudson, 1978. Pp. 316. $19.95 The Journal of Economic History. 38: 1001-1002. DOI: 10.1017/S0022050700087544 |
0.295 |
|
1978 |
Kim YH, Mura T, Fine ME. Fatigue crack initiation and microcrack growth in 4140 steel Metallurgical Transactions A. 9: 1679-1683. DOI: 10.1007/Bf02661952 |
0.482 |
|
1977 |
ZWISSLER JG, FINE ME, GROVES GW. Strength and Toughness of a Ceramic Reinforced with Metal Wires Journal of the American Ceramic Society. 60: 390-396. DOI: 10.1111/J.1151-2916.1977.Tb15519.X |
0.433 |
|
1977 |
Liaw P, Fine M, Kiritani M, Ono S. The effect of temperature on the fatigue crack propagation rate in aluminum Scripta Metallurgica. 11: 1151-1155. DOI: 10.1016/0036-9748(77)90325-8 |
0.459 |
|
1977 |
Santner JS, Fine ME. The hysteretic plastic work as a failure criterion in a coffin-manson type relation Scripta Metallurgica. 11: 159-162. DOI: 10.1016/0036-9748(77)90298-8 |
0.336 |
|
1977 |
Shozo I, Yoshito I, Fine ME. Plastic work during fatigue crack propagation in a high strength low alloy steel and in 7050 Al-Alloy Engineering Fracture Mechanics. 9: 123-136. DOI: 10.1016/0013-7944(77)90057-1 |
0.493 |
|
1977 |
Ikeda S, Sakai T, Fine ME. Fatigue behaviour of precipitation-hardening medium C steels containing Cu Journal of Materials Science. 12: 675-683. DOI: 10.1007/BF00548157 |
0.384 |
|
1976 |
Thielen PN, Fine ME, Fournelle RA. Cyclic stress strain relations and strain-controlled fatigue of 4140 steel Acta Metallurgica. 24: 1-10. DOI: 10.1016/0001-6160(76)90140-1 |
0.464 |
|
1976 |
Fournelle RA, Grey EA, Fine ME. Fatigue behavior of a precipitation hardening Ni−Al−Cu medium carbon steel Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 7: 669-682. DOI: 10.1007/Bf03186798 |
0.502 |
|
1976 |
Fournelle RA, Grey EA, Fine ME. Fatigue behavior of a precipitation hardening Ni-Al-Cu medium carbon steel Metallurgical Transactions A. 7: 669-682. DOI: 10.1007/BF02646475 |
0.401 |
|
1976 |
Santner JS, Fine ME. Origin of brittle intergranular fatigue fracture in warm aged Al-3.6 wt pct Cu Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 7: 601-604. DOI: 10.1007/Bf02643974 |
0.449 |
|
1976 |
Santner JS, Fine ME. Fatigue crack propagation in aluminum-base copper alloys Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 7: 583-593. DOI: 10.1007/Bf02643972 |
0.536 |
|
1975 |
Mendelson MI, Fine ME. Dependence of Fracture Energy on Grain Size for Subsidiary Cracking in Ceramics Journal of the American Ceramic Society. 58: 262-262. DOI: 10.1111/J.1151-2916.1975.Tb11466.X |
0.433 |
|
1975 |
Fine ME, Santner JS. Effect of dispersed phases on cyclic softening of AlCu alloys with GP zones Scripta Metallurgica. 9: 1239-1241. DOI: 10.1016/0036-9748(75)90416-0 |
0.45 |
|
1975 |
Thielen PN, Fine ME. Cyclic strength differential effect in 4140 steel Scripta Metallurgica. 9: 383-386. DOI: 10.1016/0036-9748(75)90168-4 |
0.405 |
|
1975 |
Thielen PN, Fine ME. Fatigue crack propagation in 4140 steel Metallurgical Transactions A. 6: 2133-2141. DOI: 10.1007/Bf03161840 |
0.476 |
|
1975 |
Fine ME. Precipitation hardening of aluminum alloys Metallurgical Transactions A. 6: 625-630. DOI: 10.1007/Bf02672283 |
0.527 |
|
1975 |
FINE ME, HSIEH N. ChemInform Abstract: WIEDEMANN-FRANZ-LORENZ RELATION IN HIGHLY ELECTRONIC-CONDUCTING OXIDES Chemischer Informationsdienst. 6: no-no. DOI: 10.1002/chin.197508022 |
0.201 |
|
1974 |
Sakai T, Fine M. Basal slip of TiAl single crystals Scripta Metallurgica. 8: 545-547. DOI: 10.1016/0036-9748(74)90066-0 |
0.314 |
|
1974 |
Sakai T, Fine M. Failure of Schmid's law in TiAl alloys for prismatic slip Scripta Metallurgica. 8: 541-544. DOI: 10.1016/0036-9748(74)90065-9 |
0.431 |
|
1974 |
Sakai T, Fine M. Plastic deformation of Ti-Al single crystals in prismatic slip Acta Metallurgica. 22: 1359-1372. DOI: 10.1016/0001-6160(74)90036-4 |
0.468 |
|
1974 |
Leemans D, Fine ME. Solid solution softening and strain-rate sensitivity of Fe-Re and Fe-Mo alloys Metallurgical Transactions. 5: 1331-1336. DOI: 10.1007/BF02646616 |
0.304 |
|
1974 |
FINE ME, HSIEH N. Wiedermann-Franz-Lorenz Relation in Highly Electronic-Conducting Oxides Journal of the American Ceramic Society. 57: 502-503. DOI: 10.1002/Chin.197508022 |
0.31 |
|
1974 |
SHANNON RE, JOHNSON DL, FINE ME. Precipitation Hardening of Spinel with Excess MgO Journal of the American Ceramic Society. 57: 269-269. DOI: 10.1002/Chin.197441008 |
0.451 |
|
1974 |
MENDELSON MI, FINE ME. Enhancement of Fracture Properties of Wustite by Precipitation Journal of the American Ceramic Society. 57: 154-159. DOI: 10.1002/Chin.197429013 |
0.352 |
|
1974 |
MENDELSON MI, FINE ME. ChemInform Abstract: ENHANCEMENT OF FRACTURE PROPERTIES OF WUSTITE BY PRECIPITATION Chemischer Informationsdienst. 5: no-no. DOI: 10.1002/chin.197429013 |
0.249 |
|
1973 |
MARCUS HL, FINE ME. ChemInform Abstract: AUSSCHEIDUNGEN AN DER KORNGRENZE IN MIT MGO DOTIERTEM AL2O3 Chemischer Informationsdienst. 4: no-no. DOI: 10.1002/chin.197304011 |
0.23 |
|
1972 |
MARCUS HL, FINE ME. Grain-Boundary Segregation in MgO-Doped Al2O3 Journal of the American Ceramic Society. 55: 568-570. DOI: 10.1111/J.1151-2916.1972.Tb13438.X |
0.373 |
|
1972 |
Kruse EW, Fine ME. Precipitation Strengthening of MgO by MgFe2O4 Journal of the American Ceramic Society. 55: 32-37. DOI: 10.1111/J.1151-2916.1972.Tb13392.X |
0.426 |
|
1972 |
Takahashi M, Fine ME. Magnetic behavior of quenched and aged CoFe2O4–Co3O4 alloys Journal of Applied Physics. 43: 4205-4216. DOI: 10.1063/1.1660897 |
0.403 |
|
1972 |
Gentry WO, Fine ME. Precipitation in Ni-11.1 at.% Al and Ni-13.8 at.% Al alloys☆ Acta Metallurgica. 20: 181-190. DOI: 10.1016/0001-6160(72)90179-4 |
0.484 |
|
1972 |
KRUSE EWI, FINE ME. ChemInform Abstract: AUSSCHEIDUNGSVERFESTIGUNG VON MGO DURCH MGFE2O4 Chemischer Informationsdienst. 3: no-no. DOI: 10.1002/Chin.197217014 |
0.321 |
|
1971 |
TAKAHASHI M, GUIMARAES JRC, FINE ME. Spinodal Decomposition in the System CoFe2O4-Co3O4 Journal of the American Ceramic Society. 54: 291-295. DOI: 10.1111/J.1151-2916.1971.Tb12293.X |
0.398 |
|
1971 |
Urakami A, Fine M. Yield drop effects for basal and prismatic slip in Mg-Li alloy single crystals Acta Metallurgica. 19: 887-894. DOI: 10.1016/0001-6160(71)90081-2 |
0.474 |
|
1970 |
TAKAHASHI M, FINE ME. Coercive Force of Spinodally Decomposed Cobalt Ferrite with Excess Cobalt Journal of the American Ceramic Society. 53: 633-634. DOI: 10.1111/J.1151-2916.1970.Tb15989.X |
0.32 |
|
1970 |
CLARKE TM, JOHNSON DL, FINE ME. Effect of Oxygen Partial Pressure on Precipitation in Titanium-Doped Aluminum Oxide Journal of the American Ceramic Society. 53: 419-419. DOI: 10.1111/J.1151-2916.1970.Tb12147.X |
0.341 |
|
1970 |
Urakami A, Fine ME. Influence of misfit centers on formation of helical dislocations Scripta Metallurgica. 4: 667-671. DOI: 10.1016/0036-9748(70)90203-6 |
0.375 |
|
1970 |
Urakami A, Meshii M, Fine M. Electron microscopic investigation of prismatic slip in Mg-10.5 at.% Li single crystals Acta Metallurgica. 18: 87-99. DOI: 10.1016/0001-6160(70)90072-6 |
0.416 |
|
1970 |
Lahiri SK, Fine ME. Temperature dependence of yield stress in fe-1.67 at. pct Cu and fe-0.5 at. pct Au Metallurgical Transactions. 1: 1495-1499. DOI: 10.1007/BF02641991 |
0.3 |
|
1969 |
WOODS KN, FINE ME. Nucleation and Growth of Magnesioferrite in MgO Containing 0.9% Fe3+ Journal of the American Ceramic Society. 52: 186-188. DOI: 10.1111/J.1151-2916.1969.Tb13362.X |
0.39 |
|
1969 |
Woods KN, Fine ME. MgO Containing Fe++: Magnetic properties and clustering Journal of Applied Physics. 40: 3425-3433. DOI: 10.1063/1.1658215 |
0.226 |
|
1968 |
WIRTZ GP, FINE ME. Precipitation and Coarsening of Magnesioferrite in Dilute Solutions of Iron in MgO Journal of the American Ceramic Society. 51: 402-406. DOI: 10.1111/J.1151-2916.1968.Tb11903.X |
0.406 |
|
1968 |
Fine ME, Koch FB. Néel Transformation in Near‐Stoichiometric FexO Journal of Applied Physics. 39: 2478-2479. DOI: 10.1063/1.1656587 |
0.187 |
|
1968 |
Horak JA, Blewitt TH, Fine ME. Effect of Neutron Irradiation at 4.5°K on Guinier‐Preston Zone Formation in Aluminum‐Zinc Alloys Journal of Applied Physics. 39: 326-335. DOI: 10.1063/1.1655753 |
0.369 |
|
1968 |
Fine ME. Comments on “coherency hardening in NiAlTi alloys” Scripta Metallurgica. 2: 155. DOI: 10.1016/0036-9748(68)90215-9 |
0.408 |
|
1967 |
Hsu SE, Kobes W, Fine ME. Strengthening of Sapphire by Precipitates Containing Titanium Journal of the American Ceramic Society. 50: 149-151. DOI: 10.1111/J.1151-2916.1967.Tb15066.X |
0.5 |
|
1967 |
Wirtz GP, Fine ME. Superparamagnetic Magnesioferrite Precipitates from Dilute Solutions of Iron in MgO Journal of Applied Physics. 38: 3729-3737. DOI: 10.1063/1.1710202 |
0.229 |
|
1967 |
Koch FB, Fine ME. Magnetic Properties of FexO as Related to the Defect Structure Journal of Applied Physics. 38: 1470-1471. DOI: 10.1063/1.1709672 |
0.204 |
|
1966 |
Wolfson RG, Kobes W, Fine ME. Precipitation in NaCl‐KCl Mixed Crystals Journal of Applied Physics. 37: 704-712. DOI: 10.1063/1.1708241 |
0.229 |
|
1965 |
Herman H, Kauffman JW, Fine ME. Electron Irradiation of Al‐1.7 at.% Cu in the Reverted Condition Journal of Applied Physics. 36: 1976-1978. DOI: 10.1063/1.1714386 |
0.273 |
|
1964 |
Gerber IJ, Sachar HM, Fine M, Himmelfarb M. The Course of Modern Jewish History Journal For the Scientific Study of Religion. 4: 130. DOI: 10.2307/1385238 |
0.168 |
|
1964 |
Groves GW, Fine ME. Solid Solution and Precipitation Hardening in Mg‐Fe‐O Alloys Journal of Applied Physics. 35: 3587-3593. DOI: 10.1063/1.1713276 |
0.369 |
|
1964 |
Dawance MM, Israel DHB, Fine ME. Magnetic study of deformation in an age hardened Ni-Ti alloy☆ Acta Metallurgica. 12: 705-712. DOI: 10.1016/0001-6160(64)90217-2 |
0.474 |
|
1963 |
Poll S, Fine M, Himmelfarb M. American Jewish Yearbook 1962 (Vol. 63) Journal For the Scientific Study of Religion. 2: 276. DOI: 10.2307/1385098 |
0.169 |
|
1963 |
Wimmer FT, Kobes W, Fine ME. Tensile Properties of NaCl‐BaNr Solid Solution Single Crystals Journal of Applied Physics. 34: 1775-1778. DOI: 10.1063/1.1702678 |
0.243 |
|
1963 |
Israel DHB, Fine ME. Precipitation studies in Ni-10 at.% Ti☆ Acta Metallurgica. 11: 1051-1059. DOI: 10.1016/0001-6160(63)90193-7 |
0.483 |
|
1962 |
Makkay RW, Geiger GH, Fine ME. Elasticity and Internal Friction of α‐Fe2O3 Journal of Applied Physics. 33: 914-916. DOI: 10.1063/1.1777190 |
0.238 |
|
1962 |
Makkay RW, Fine ME. Vacuum Reduction of α‐Nb2O5 at Low Temperatures Journal of Applied Physics. 33: 745-745. DOI: 10.1063/1.1702500 |
0.276 |
|
1962 |
Cohen J, Fine ME. Some aspects of short-range order Journal De Physique Et Le Radium. 23: 749-762. DOI: 10.1051/jphysrad:019620023010074901 |
0.201 |
|
1961 |
Byrne JG, Fine ME, Kelly A. Precipitate hardening in an aluminium-copper alloy Philosophical Magazine. 6: 1119-1145. DOI: 10.1080/14786436108239674 |
0.413 |
|
1961 |
Greener EH, Whitmore DH, Fine ME. Electrical Conductivity of Near‐Stoichiometric α‐Nb2O5 The Journal of Chemical Physics. 34: 1017-1023. DOI: 10.1063/1.1731627 |
0.176 |
|
1961 |
Koppenaal TJ, Fine ME. Acoustical Study of Quench‐Aging in α Cu‐Al Alloys Journal of Applied Physics. 32: 1781-1782. DOI: 10.1063/1.1728436 |
0.428 |
|
1961 |
Dash J, Fine M. Temperature and composition dependence of the strength of aluminum base zinc alloy single crystals Acta Metallurgica. 9: 149-154. DOI: 10.1016/0001-6160(61)90059-1 |
0.516 |
|
1960 |
Freise EJ, Fine ME, Kelly A. The effect of electropolishing on the retention of vacancies during quenching in al and al alloys Philosophical Magazine. 5: 101-103. DOI: 10.1080/14786436008241205 |
0.342 |
|
1960 |
Wolfson RG, Fine ME, Ewald AW. Transformation Studies of Gray Tin Single Crystals Journal of Applied Physics. 31: 1973-1977. DOI: 10.1063/1.1735482 |
0.209 |
|
1959 |
Fine ME. Temperature dependence of the strength of zone hardened aluminium-silver alloys Philosophical Magazine. 4: 1375-1377. DOI: 10.1080/14786435908233372 |
0.425 |
|
1959 |
Fine M. Electrical resistivity change from formation of zones in aluminum alloys Acta Metallurgica. 7: 228-229. DOI: 10.1016/0001-6160(59)90085-9 |
0.339 |
|
1957 |
Fine ME. Apparatus for Precise Determination of Dynamic Young's Modulus and Internal Friction at Elevated Temperatures Review of Scientific Instruments. 28: 643-645. DOI: 10.1063/1.1715960 |
0.254 |
|
1957 |
Kelly A, Fine M. The strength of an alloy containing zones Acta Metallurgica. 5: 365-367. DOI: 10.1016/0001-6160(57)90003-2 |
0.506 |
|
1956 |
Kuczynski GC, Doyama M, Fine ME. Transformations in Disordered Gold Copper Alloys Journal of Applied Physics. 27: 651-655. DOI: 10.1063/1.1722450 |
0.327 |
|
1955 |
Fine ME. Elastic constants of germanium between 1.7°and 80°K Journal of Applied Physics. 26: 862-863. DOI: 10.1063/1.1722110 |
0.241 |
|
1955 |
Fine ME. Erratum: Elastic Constants of Germanium between 1.7° and 80°K Journal of Applied Physics. 26: 1389-1389. DOI: 10.1063/1.1721920 |
0.217 |
|
1954 |
Fine ME, Kenney NT. Low-temperature acoustic relaxation in Ni-Fe ferrites Physical Review. 96: 1487-1488. DOI: 10.1103/PhysRev.96.1487 |
0.27 |
|
1954 |
Fine ME, Kenney NT. Moduli and internal friction of magnetite as affected by the low-temperature transformation Physical Review. 94: 1573-1576. DOI: 10.1103/PhysRev.94.1573 |
0.29 |
|
1954 |
Fine ME. Apparatus for measuring the elastic moduli and internal friction of solids from 1.7 to above 77°K and some values for α-quartz Review of Scientific Instruments. 25: 1188-1190. DOI: 10.1063/1.1770978 |
0.26 |
|
1954 |
Fine ME, Van Duyne H, Kenney NT. Low-temperature internal friction and elasticity effects in vitreous silica Journal of Applied Physics. 25: 402-405. DOI: 10.1063/1.1721649 |
0.288 |
|
1953 |
Fine ME. Magnetomechanical effects in an antiferromagnet, CoO Reviews of Modern Physics. 25: 158. DOI: 10.1103/RevModPhys.25.158 |
0.206 |
|
1953 |
Fine ME. Elasticity and Thermal Expansion of Germanium Between −195 and 275°C Journal of Applied Physics. 24: 338-340. DOI: 10.1063/1.1721275 |
0.364 |
|
1953 |
Fine ME. Cp–Cv in Silicon and Germanium The Journal of Chemical Physics. 21: 1427-1427. DOI: 10.1063/1.1699272 |
0.185 |
|
1952 |
Fine ME. Evidence for domain structure in antiferromagnetic CoO from elasticity measurements [24] Physical Review. 87: 1143. DOI: 10.1103/PhysRev.87.1143 |
0.197 |
|
1951 |
Fine ME, Greiner ES, Ellis WC. Transitions in Chromium Jom. 3: 56-58. DOI: 10.1007/BF03398956 |
0.187 |
|
1951 |
Fine ME, Ellis WC. Thermal Variation of Young’s Modulus in Some Fe-Ni-Mo Alloys Jom. 3: 761-764. DOI: 10.1007/BF03397368 |
0.35 |
|
1950 |
Fine ME. A simple torsion pendulum for measuring internal friction Jom. 2: 1322-1322. DOI: 10.1007/BF03399155 |
0.207 |
|
1950 |
Fine ME, Ellis WC. Young’s modulus and its temperature dependence in 36 to 52 pct nickel-iron alloys Jom. 2: 1120-1125. DOI: 10.1007/BF03399108 |
0.372 |
|
1950 |
Fine ME. Correlation between electrical and thermal conductivity in nickel and nickel alloys Jom. 2: 951-952. DOI: 10.1007/BF03399089 |
0.335 |
|
Show low-probability matches. |