Year |
Citation |
Score |
2022 |
Rakhmonov JU, Weiss D, Dunand DC. Comparing evolution of precipitates and strength upon aging of cast and laser-remelted Al-8Ce-0.2Sc-0.1Zr (wt.%). Materials Science & Engineering. a, Structural Materials : Properties, Microstructure and Processing. 840. PMID 36439899 DOI: 10.1016/j.msea.2022.142990 |
0.341 |
|
2022 |
Rakhmonov JU, Bahl S, Shyam A, Dunand DC. Cavitation-resistant intergranular precipitates enhance creep performance of '-strengthened Al-Cu based alloys. Acta Materialia. 228. PMID 36439291 DOI: 10.1016/j.actamat.2022.117788 |
0.348 |
|
2022 |
Farkoosh AR, Dunand DC, Seidman DN. Enhanced age-hardening response and creep resistance of an Al-0.5Mn-0.3Si (at.%) alloy by Sn inoculation. Acta Materialia. 240. PMID 36246780 DOI: 10.1016/j.actamat.2022.118344 |
0.583 |
|
2021 |
Farkoosh AR, Dunand DC, Seidman DN. Solute-induced strengthening during creep of an aged-hardened Al-Mn-Zr alloy. Acta Materialia. 219. PMID 36247868 DOI: 10.1016/j.actamat.2021.117268 |
0.598 |
|
2020 |
Wilke SK, Lundberg RA, Dunand DC. Hierarchical Structural Changes During Redox Cycling of Fe-Based Lamellar Foams Containing YSZ, CeO, or ZrO. Acs Applied Materials & Interfaces. PMID 32434318 DOI: 10.1021/Acsami.0C05107 |
0.33 |
|
2020 |
Wilke SK, Dunand DC. Finite Element Model for Coupled Diffusion and Elastoplastic Deformation during High-Temperature Oxidation of Fe to FeO Journal of the Electrochemical Society. 167: 080532. DOI: 10.1149/1945-7111/Ab8Ed4 |
0.334 |
|
2020 |
Wilke SK, Dunand DC. Fe-Ni Foams Self-Heal during Redox Cycling via Reversible Formation/Homogenization of a Ductile Ni Scaffold Journal of Materials Chemistry. DOI: 10.1039/D0Ta06813F |
0.323 |
|
2020 |
Park H, Li C, Jakus AE, Shah RN, Choe H, Dunand DC. High-temperature mechanical properties of γ/γ′ Co–Ni–W–Al superalloy microlattices Scripta Materialia. 188: 146-150. DOI: 10.1016/J.Scriptamat.2020.07.009 |
0.436 |
|
2020 |
Croteau JR, Jung JG, Whalen SA, Darsell J, Mello A, Holstine D, Lay K, Hansen M, Dunand DC, Vo NQ. Ultrafine-grained Al-Mg-Zr alloy processed by shear-assisted extrusion with high thermal stability Scripta Materialia. 186: 326-330. DOI: 10.1016/J.Scriptamat.2020.05.051 |
0.445 |
|
2020 |
Cann JL, Luca AD, Dunand DC, Dye D, Miracle DB, Oh HS, Olivetti EA, Pollock TM, Poole WJ, Yang R, Tasan CC. Sustainability through alloy design: Challenges and opportunities Progress in Materials Science. 100722. DOI: 10.1016/J.Pmatsci.2020.100722 |
0.31 |
|
2020 |
Chung D, Ng DS, Dunand DC. Influence of γ′-raft orientation on creep resistance of monocrystalline Co-based superalloys Materialia. 12: 100678. DOI: 10.1016/J.Mtla.2020.100678 |
0.366 |
|
2020 |
Shu S, Luca AD, Dunand DC, Seidman DN. Individual and synergistic effects of Mn and Mo micro-additions on precipitation and strengthening of a dilute Al–Zr-Sc-Er-Si alloy Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 140288. DOI: 10.1016/J.Msea.2020.140288 |
0.437 |
|
2020 |
Farkoosh AR, Dunand DC, Seidman DN. Effects of W and Si microadditions on microstructure and the strength of dilute, precipitation-strengthened Al–Zr–Er alloys Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 140159. DOI: 10.1016/J.Msea.2020.140159 |
0.453 |
|
2020 |
Tirado FLR, Taylor SV, Dunand DC. Low-density, W-free Co–Nb–V–Al-based superalloys with γ/γ’ microstructure Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 796: 139977. DOI: 10.1016/J.Msea.2020.139977 |
0.435 |
|
2020 |
Ng DS, Dunand DC. Aging- and creep-resistance of a cast hypoeutectic Al-6.9Ce-9.3Mg (wt.%) alloy Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 786: 139398. DOI: 10.1016/J.Msea.2020.139398 |
0.444 |
|
2020 |
Ng DS, Chung D, Toinin JP, Seidman DN, Dunand DC, Lass EA. Effect of Cr additions on a γ-γ’ microstructure and creep behavior of a Co-based superalloy with low W content Materials Science and Engineering: A. 778: 139108. DOI: 10.1016/J.Msea.2020.139108 |
0.615 |
|
2020 |
Baik SI, Rawlings MJS, Dunand DC. Effect of aging on coarsening- and creep resistance of a Ti-modified Fe–Ni–Al–Cr–Mo ferritic steel with L21/B2 composite precipitates Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 776: 138987. DOI: 10.1016/J.Msea.2020.138987 |
0.43 |
|
2020 |
Malki MMA, Shi X, Qiu P, Snyder GJ, Dunand DC. Creep behavior and post-creep thermoelectric performance of the n-type Skutterudite alloy Yb0.3Co4Sb12 Journal of Materiomics. DOI: 10.1016/J.Jmat.2020.07.012 |
0.429 |
|
2020 |
Li C, Chung DW, Dunand DC, Seidman DN. Microstructural stability and mechanical behavior of a Co–20Ni–7Al–7W–4Ti at.% superalloy Journal of Alloys and Compounds. 848: 156378. DOI: 10.1016/J.Jallcom.2020.156378 |
0.372 |
|
2020 |
Chung D, Toinin JP, Lass EA, Seidman DN, Dunand DC. Effects of Cr on the properties of multicomponent cobalt-based superalloys with ultra high γ’ volume fraction Journal of Alloys and Compounds. 832: 154790. DOI: 10.1016/J.Jallcom.2020.154790 |
0.59 |
|
2020 |
Farkoosh AR, Dunand DC, Seidman DN. Tungsten solubility in L12-ordered Al3Er and Al3Zr nanoprecipitates formed by aging in an aluminum matrix Journal of Alloys and Compounds. 820: 153383. DOI: 10.1016/J.Jallcom.2019.153383 |
0.39 |
|
2020 |
Puente AEPy, Dunand DC. Erratum: Effect of Cr content on interdiffusion and Kirkendall pore formation during homogenization of pack-aluminized Ni and Ni–Cr wires (Intermetallics, (S096697951930932X), (10.1016/j.intermet.2019.106633)) Intermetallics. 117: 106634. DOI: 10.1016/J.Intermet.2019.106634 |
0.344 |
|
2020 |
Paz y Puente A, Dunand D. Erratum to “Effect of Cr content on interdiffusion and Kirkendall pore formation during homogenization of pack-aluminized Ni and Ni–Cr wires” [Intermetallics 101 (2018) 108–115] Intermetallics. 117: 106633. DOI: 10.1016/J.Intermet.2019.106633 |
0.333 |
|
2020 |
Jeong K, Cho H, Han HN, Dunand DC. A fully coupled diffusional-mechanical finite element modeling for tin oxide-coated copper anode system in lithium-ion batteries Computational Materials Science. 172: 109343. DOI: 10.1016/J.Commatsci.2019.109343 |
0.335 |
|
2020 |
Chen P, Kenel C, Wang Y, Dunand DC. SnO2-Ag composites with high thermal cycling stability created by Ag infiltration of 3D ink-extruded SnO2 microlattices Applied Materials Today. 21: 100794. DOI: 10.1016/J.Apmt.2020.100794 |
0.367 |
|
2020 |
Kenel C, Sesseg JP, Geisendorfer NR, Shah RN, Spolenak R, Dunand DC. 3D-printed tungsten sheet-gyroids via reduction and sintering of extruded WO3-nanopowder inks Additive Manufacturing. 36: 101613. DOI: 10.1016/J.Addma.2020.101613 |
0.428 |
|
2020 |
Glerum JA, Kenel C, Sun T, Dunand DC. Synthesis of precipitation-strengthened Al-Sc, Al-Zr and Al-Sc-Zr alloys via selective laser melting of elemental powder blends Additive Manufacturing. 36: 101461. DOI: 10.1016/J.Addma.2020.101461 |
0.444 |
|
2020 |
Song B, Kenel C, Dunand DC. 3D ink-extrusion printing and sintering of Ti, Ti-TiB and Ti-TiC microlattices Additive Manufacturing. 35: 101412. DOI: 10.1016/J.Addma.2020.101412 |
0.438 |
|
2020 |
Long FR, Baik SI, Chung DW, Xue F, Lass EA, Seidman DN, Dunand DC. Microstructure and creep performance of a multicomponent Co-based L12–ordered intermetallic alloy Acta Materialia. 196: 396-408. DOI: 10.1016/J.Actamat.2020.06.050 |
0.432 |
|
2020 |
Kenel C, Davenport T, Li X, Shah R, Dunand D. Kinetics of alloy formation and densification in Fe-Ni-Mo microfilaments extruded from oxide- or metal-powder inks Acta Materialia. 193: 51-60. DOI: 10.1016/J.Actamat.2020.04.038 |
0.386 |
|
2020 |
De Luca A, Seidman DN, Dunand DC. Mn and Mo additions to a dilute Al-Zr-Sc-Er-Si-based alloy to improve creep resistance through solid-solution- and precipitation-strengthening Acta Materialia. 194: 60-67. DOI: 10.1016/J.Actamat.2020.04.022 |
0.649 |
|
2020 |
Griffiths S, Croteau JR, Rossell MD, Erni R, Luca AD, Vo NQ, Dunand DC, Leinenbach C. Coarsening- and creep resistance of precipitation-strengthened Al–Mg–Zr alloys processed by selective laser melting Acta Materialia. 188: 192-202. DOI: 10.1016/J.Actamat.2020.02.008 |
0.401 |
|
2019 |
Kenel C, Casati NPM, Dunand DC. 3D ink-extrusion additive manufacturing of CoCrFeNi high-entropy alloy micro-lattices. Nature Communications. 10: 904. PMID 30796218 DOI: 10.1038/S41467-019-08763-4 |
0.425 |
|
2019 |
Röthlisberger A, Häberli S, Krogh F, Galinski H, Dunand DC, Spolenak R. Ice-Templated W-Cu Composites with High Anisotropy. Scientific Reports. 9: 476. PMID 30679526 DOI: 10.1038/S41598-018-36604-9 |
0.354 |
|
2019 |
Suwanpreecha C, Toinin JP, Pandee P, Dunand DC, Limmaneevichitr C. Isothermal aging of Al-Ni-Sc alloy containing Al 3 Ni microfibers and Al 3 Sc nanoprecipitates Journal of Metals, Materials and Minerals. 29: 37-41. DOI: 10.14456/Jmmm.2019.16 |
0.43 |
|
2019 |
Malki MMA, Qiu Q, Zhu T, Snyder GJ, Dunand DC. Creep behavior and postcreep thermoelectric performance of the n-type half-Heusler alloy Hf0.3Zr0.7NiSn0.98Sb0.02 Materials Today Physics. 9: 100134. DOI: 10.1016/J.Mtphys.2019.100134 |
0.448 |
|
2019 |
Liu Y, Michi RA, Dunand DC. Cast near-eutectic Al-12.5 wt.% Ce alloy with high coarsening and creep resistance Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 767: 138440. DOI: 10.1016/J.Msea.2019.138440 |
0.502 |
|
2019 |
Michi RA, Toinin JP, Seidman DN, Dunand DC. Ambient- and elevated-temperature strengthening by Al3Zr-Nanoprecipitates and Al3Ni-Microfibers in a cast Al-2.9Ni-0.11Zr-0.02Si-0.005Er (at.%) alloy Materials Science and Engineering: A. 759: 78-89. DOI: 10.1016/J.Msea.2019.05.018 |
0.643 |
|
2019 |
Lin JD, Seidman DN, Dunand DC. Improving coarsening resistance of dilute Al-Sc-Zr-Si alloys with Sr or Zn additions Materials Science and Engineering: A. 754: 447-456. DOI: 10.1016/J.Msea.2019.03.104 |
0.428 |
|
2019 |
Garnier MJ, Dunand DC. Ni-Al2O3 nacre-like composites through hot-pressing of freeze-cast foams Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 743: 190-196. DOI: 10.1016/J.Msea.2018.11.033 |
0.406 |
|
2019 |
Okle P, Lin JD, Zhu T, Dunand DC, Seidman DN. Effect of micro-additions of Ge, In or Sn on precipitation in dilute Al-Sc-Zr alloys Materials Science and Engineering: A. 739: 427-436. DOI: 10.1016/J.Msea.2018.10.058 |
0.468 |
|
2019 |
Michi RA, De Luca A, Seidman DN, Dunand DC. Effects of Si and Fe micro-additions on the aging response of a dilute Al-0.08Zr-0.08Hf-0.045Er at.% alloy Materials Characterization. 147: 72-83. DOI: 10.1016/J.Matchar.2018.10.016 |
0.597 |
|
2019 |
Taylor SL, Shah RN, Dunand DC. Microstructure and porosity evolution during sintering of Ni-Mn-Ga wires printed from inks containing elemental powders Intermetallics. 104: 113-123. DOI: 10.1016/J.Intermet.2018.10.024 |
0.395 |
|
2019 |
Yost AR, Erdeniz D, Paz y Puente AE, Dunand DC. Effect of diffusion distance on evolution of Kirkendall pores in titanium-coated nickel wires Intermetallics. 104: 124-132. DOI: 10.1016/J.Intermet.2018.10.020 |
0.383 |
|
2019 |
Michi RA, Perrin Toinin J, Farkoosh AR, Seidman DN, Dunand DC. Effects of Zn and Cr additions on precipitation and creep behavior of a dilute Al–Zr–Er–Si alloy Acta Materialia. 181: 249-261. DOI: 10.1016/J.Actamat.2019.09.055 |
0.427 |
|
2019 |
Sauza DJ, Dunand DC, Seidman DN. Microstructural evolution and high-temperature strength of a γ(f.c.c.)/γ’(L12) Co–Al–W–Ti–B superalloy Acta Materialia. 174: 427-438. DOI: 10.1016/J.Actamat.2019.05.058 |
0.38 |
|
2019 |
Tirado FLR, Taylor S, Dunand DC. Effect of Al, Ti and Cr additions on the γ-γ’ microstructure of W-free Co-Ta-V-Based superalloys Acta Materialia. 172: 44-54. DOI: 10.1016/J.Actamat.2019.04.031 |
0.435 |
|
2019 |
De Luca A, Seidman DN, Dunand DC. Effects of Mo and Mn microadditions on strengthening and over-aging resistance of nanoprecipitation-strengthened Al-Zr-Sc-Er-Si alloys Acta Materialia. 165: 1-14. DOI: 10.1016/J.Actamat.2018.11.031 |
0.615 |
|
2019 |
Sauza DJ, Dunand DC, Noebe RD, Seidman DN. γ’-(L12) precipitate evolution during isothermal aging of a Co Al W Ni superalloy Acta Materialia. 164: 654-662. DOI: 10.1016/J.Actamat.2018.11.014 |
0.403 |
|
2019 |
Suwanpreecha C, Toinin JP, Michi RA, Pandee P, Dunand DC, Limmaneevichitr C. Strengthening mechanisms in Al-Ni-Sc alloys containing Al3Ni microfibers and Al3Sc nanoprecipitates Acta Materialia. 164: 334-346. DOI: 10.1016/J.Actamat.2018.10.059 |
0.479 |
|
2019 |
Beeri O, Baik SI, Bram AI, Shandalov M, Seidman DN, Dunand DC. Effect of U and Th trace additions on the precipitation strengthening of Al–0.09Sc (at.%) alloy Journal of Materials Science. 54: 3485-3495. DOI: 10.1007/S10853-018-3036-3 |
0.389 |
|
2018 |
Taylor SL, Ibeh AJ, Jakus AE, Shah RN, Dunand DC. NiTi-Nb Micro-trusses Fabricated via Extrusion-based 3D-printing of Powders and Transient-liquid-phase Sintering. Acta Biomaterialia. PMID 29890266 DOI: 10.1016/J.Actbio.2018.06.015 |
0.423 |
|
2018 |
Michi RA, Kim G, Kim BW, Lee W, Dunand DC. Compressive creep behavior of hot-pressed Mg1.96Al0.04Si0.97Bi0.03 Scripta Materialia. 148: 10-14. DOI: 10.1016/J.Scriptamat.2018.01.011 |
0.42 |
|
2018 |
Scotti KL, Dunand DC. Freeze casting – A review of processing, microstructure and properties via the open data repository, FreezeCasting.net Progress in Materials Science. 94: 243-305. DOI: 10.1016/J.Pmatsci.2018.01.001 |
0.324 |
|
2018 |
Vo NQ, Bayansan D, Sanaty-Zadeh A, Ramos EH, Dunand DC. Effect of Yb microadditions on creep resistance of a dilute Al-Er-Sc-Zr alloy Materialia. 4: 65-69. DOI: 10.1016/J.Mtla.2018.08.030 |
0.431 |
|
2018 |
Bocchini PJ, Dunand DC. Dislocation dynamics simulations of precipitation-strengthened Ni- and Co-based superalloys Materialia. 1: 211-220. DOI: 10.1016/J.Mtla.2018.05.010 |
0.446 |
|
2018 |
Vo NQ, Seidman DN, Dunand DC. Effect of Si micro-addition on creep resistance of a dilute Al-Sc-Zr-Er alloy Materials Science and Engineering: A. 734: 27-33. DOI: 10.1016/J.Msea.2018.07.053 |
0.621 |
|
2018 |
Erdeniz D, De Luca A, Seidman DN, Dunand DC. Effects of Nb and Ta additions on the strength and coarsening resistance of precipitation-strengthened Al-Zr-Sc-Er-Si alloys Materials Characterization. 141: 260-266. DOI: 10.1016/J.Matchar.2018.04.051 |
0.63 |
|
2018 |
Griffiths S, Rossell MD, Croteau J, Vo NQ, Dunand DC, Leinenbach C. Effect of laser rescanning on the grain microstructure of a selective laser melted Al-Mg-Zr alloy Materials Characterization. 143: 34-42. DOI: 10.1016/J.Matchar.2018.03.033 |
0.379 |
|
2018 |
Paz y Puente A, Dunand D. Effect of Cr content on interdiffusion and Kirkendall pore formation during homogenization of pack-aluminized Ni and Ni-Cr wires Intermetallics. 101: 108-115. DOI: 10.1016/J.Intermet.2018.07.007 |
0.371 |
|
2018 |
Paz y Puente A, Dunand D. Synthesis of NiTi microtubes via the Kirkendall effect during interdiffusion of Ti-coated Ni wires Intermetallics. 92: 42-48. DOI: 10.1016/J.Intermet.2017.09.010 |
0.376 |
|
2018 |
Chang M, Agne M, Michi R, Dunand D, Snyder G. Compressive creep behavior of hot-pressed GeTe based TAGS-85 and effect of creep on thermoelectric properties Acta Materialia. 158: 239-246. DOI: 10.1016/J.Actamat.2018.07.050 |
0.404 |
|
2018 |
Baik SI, Wang SY, Liaw PK, Dunand DC. Increasing the creep resistance of Fe-Ni-Al-Cr superalloys via Ti additions by optimizing the B2/L21 ratio in composite nano-precipitates Acta Materialia. 157: 142-154. DOI: 10.1016/J.Actamat.2018.07.025 |
0.42 |
|
2018 |
Paz y Puente A, Dunand D. Shape-memory characterization of NiTi microtubes fabricated through interdiffusion of Ti-Coated Ni wires Acta Materialia. 156: 1-10. DOI: 10.1016/J.Actamat.2018.06.012 |
0.416 |
|
2018 |
Cho HH, Erdeniz D, Sharp KW, Dunand DC. Experimental and modeling study of compressive creep in 3D-woven Ni-based superalloys Acta Materialia. 155: 236-244. DOI: 10.1016/J.Actamat.2018.05.067 |
0.434 |
|
2018 |
Croteau JR, Griffiths S, Rossell MD, Leinenbach C, Kenel C, Jansen V, Seidman DN, Dunand DC, Vo NQ. Microstructure and mechanical properties of Al-Mg-Zr alloys processed by selective laser melting Acta Materialia. 153: 35-44. DOI: 10.1016/J.Actamat.2018.04.053 |
0.654 |
|
2018 |
Baik S, Rawlings MJ, Dunand DC. Effect of hafnium micro-addition on precipitate microstructure and creep properties of a Fe-Ni-Al-Cr-Ti ferritic superalloy Acta Materialia. 153: 126-135. DOI: 10.1016/J.Actamat.2018.04.044 |
0.384 |
|
2018 |
Tirado FLR, Toinin JP, Dunand DC. γ+γ′ microstructures in the Co-Ta-V and Co-Nb-V ternary systems Acta Materialia. 151: 137-148. DOI: 10.1016/J.Actamat.2018.03.057 |
0.338 |
|
2018 |
Lass EA, Sauza DJ, Dunand DC, Seidman DN. Multicomponent γ’-strengthened Co-based superalloys with increased solvus temperatures and reduced mass densities Acta Materialia. 147: 284-295. DOI: 10.1016/J.Actamat.2018.01.034 |
0.45 |
|
2018 |
Baik S, Rawlings MJ, Dunand DC. Atom probe tomography study of Fe-Ni-Al-Cr-Ti ferritic steels with hierarchically-structured precipitates Acta Materialia. 144: 707-715. DOI: 10.1016/J.Actamat.2017.11.013 |
0.39 |
|
2018 |
De Luca A, Dunand DC, Seidman DN. Microstructure and mechanical properties of a precipitation-strengthened Al-Zr-Sc-Er-Si alloy with a very small Sc content Acta Materialia. 144: 80-91. DOI: 10.1016/J.Actamat.2017.10.040 |
0.459 |
|
2018 |
Taylor SL, Shah RN, Dunand DC. Ni-Mn-Ga micro-trusses via sintering of 3D-printed inks containing elemental powders Acta Materialia. 143: 20-29. DOI: 10.1016/J.Actamat.2017.10.002 |
0.397 |
|
2018 |
Park H, Cho H, Kim K, Hong K, Kim J, Choe H, Dunand DC. Surface-oxidized, freeze-cast cobalt foams: Microstructure, mechanical properties and electrochemical performance Acta Materialia. 142: 213-225. DOI: 10.1016/J.Actamat.2017.09.066 |
0.37 |
|
2018 |
Taylor SL, Jakus AE, Koube KD, Ibeh AJ, Geisendorfer NR, Shah RN, Dunand DC. Sintering of micro-trusses created by extrusion-3D-printing of lunar regolith inks Acta Astronautica. 143: 1-8. DOI: 10.1016/J.Actaastro.2017.11.005 |
0.379 |
|
2018 |
Lippitz N, Erdeniz D, Sharp KW, Dunand DC. Mechanical Behavior of Three-Dimensional Braided Nickel-Based Superalloys Synthesized via Pack Cementation Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 49: 817-821. DOI: 10.1007/S11661-018-4467-9 |
0.426 |
|
2018 |
Nasim W, Yazdi S, Santamarta R, Malik J, Erdeniz D, Mansoor B, Seidman DN, Dunand DC, Karaman I. Structure and growth of core–shell nanoprecipitates in Al–Er–Sc–Zr–V–Si high-temperature alloys Journal of Materials Science. 54: 1857-1871. DOI: 10.1007/S10853-018-2941-9 |
0.404 |
|
2018 |
Calvo M, Jakus AE, Shah RN, Spolenak R, Dunand DC. Microstructure and Processing of 3D Printed Tungsten Microlattices and Infiltrated W-Cu Composites Advanced Engineering Materials. 20: 1800354. DOI: 10.1002/Adem.201800354 |
0.301 |
|
2017 |
Chen-Wiegart YK, Harder R, Dunand DC, McNulty I. Evolution of dealloying induced strain in nanoporous gold crystals. Nanoscale. PMID 28426059 DOI: 10.1039/C6Nr09635B |
0.313 |
|
2017 |
Cho HH, Glazer MPB, Dunand DC. Modeling of stresses and strains during (de)lithiation of Ni3Sn2-coated nickel inverse-opal anodes. Acs Applied Materials & Interfaces. PMID 28421737 DOI: 10.1021/Acsami.7B01640 |
0.334 |
|
2017 |
Erdeniz D, Schaedler TA, Dunand DC. Deposition-based synthesis of nickel-based superalloy microlattices Scripta Materialia. 138: 28-31. DOI: 10.1016/J.Scriptamat.2017.05.027 |
0.381 |
|
2017 |
Coakley J, Lass EA, Ma D, Frost M, Seidman DN, Dunand DC, Stone HJ. Rafting and elastoplastic deformation of superalloys studied by neutron diffraction Scripta Materialia. 134: 110-114. DOI: 10.1016/J.Scriptamat.2017.03.007 |
0.406 |
|
2017 |
Li C, Snyder G, Dunand D. Compressive creep behaviour of hot-pressed PbTe Scripta Materialia. 134: 71-74. DOI: 10.1016/J.Scriptamat.2017.02.044 |
0.371 |
|
2017 |
Paul PP, Paranjape HM, Amin-Ahmadi B, Stebner AP, Dunand DC, Brinson LC. Effect of machined feature size relative to the microstructural size on the superelastic performance in polycrystalline NiTi shape memory alloys Materials Science and Engineering: A. 706: 227-235. DOI: 10.1016/J.Msea.2017.09.016 |
0.367 |
|
2017 |
Bocchini PJ, Sudbrack CK, Noebe RD, Dunand DC, Seidman DN. Effects of titanium substitutions for aluminum and tungsten in Co-10Ni-9Al-9W (at%) superalloys Materials Science and Engineering: A. 705: 122-132. DOI: 10.1016/J.Msea.2017.08.034 |
0.393 |
|
2017 |
Bocchini PJ, Sudbrack CK, Sauza DJ, Noebe RD, Seidman DN, Dunand DC. Effect of tungsten concentration on microstructures of Co-10Ni-6Al-(0,2,4,6)W-6Ti (at%) cobalt-based superalloys Materials Science and Engineering: A. 700: 481-486. DOI: 10.1016/J.Msea.2017.06.018 |
0.433 |
|
2017 |
Lin JD, Okle P, Dunand DC, Seidman DN. Effects of Sb micro-alloying on precipitate evolution and mechanical properties of a dilute Al-Sc-Zr alloy Materials Science and Engineering: A. 680: 64-74. DOI: 10.1016/J.Msea.2016.10.067 |
0.472 |
|
2017 |
Park H, Choi M, Choe H, Dunand DC. Microstructure and compressive behavior of ice-templated copper foams with directional, lamellar pores Materials Science and Engineering: A. 679: 435-445. DOI: 10.1016/J.Msea.2016.10.057 |
0.335 |
|
2017 |
Plunk AA, Dunand DC. Iron foams created by directional freeze casting of iron oxide, reduction and sintering Materials Letters. 191: 112-115. DOI: 10.1016/J.Matlet.2016.12.104 |
0.309 |
|
2017 |
Glazer MP, Wang J, Cho J, Almer JD, Okasinski JS, Braun PV, Dunand DC. In operando X-ray diffraction strain measurement in Ni3Sn2 – Coated inverse opal nanoscaffold anodes for Li-ion batteries Journal of Power Sources. 367: 80-89. DOI: 10.1016/J.Jpowsour.2017.09.040 |
0.355 |
|
2017 |
Coakley J, Lass EA, Ma D, Frost M, Stone HJ, Seidman DN, Dunand DC. Lattice parameter misfit evolution during creep of a cobalt-based superalloy single crystal with cuboidal and rafted gamma-prime microstructures Acta Materialia. 136: 118-125. DOI: 10.1016/J.Actamat.2017.06.025 |
0.381 |
|
2017 |
Coakley J, Ma D, Frost M, Dye D, Seidman DN, Dunand DC, Stone HJ. Lattice strain evolution and load partitioning during creep of a Ni-based superalloy single crystal with rafted γ′ microstructure Acta Materialia. 135: 77-87. DOI: 10.1016/J.Actamat.2017.06.021 |
0.459 |
|
2017 |
Erdeniz D, Nasim W, Malik J, Yost AR, Park S, De Luca A, Vo NQ, Karaman I, Mansoor B, Seidman DN, Dunand DC. Corrigendum to “Effect of vanadium micro-alloying on the microstructural evolution and creep behavior of Al-Er-Sc-Zr-Si alloys” [Acta Mater. 124 (2017) 501–512] Acta Materialia. 133: 440. DOI: 10.1016/J.Actamat.2017.05.055 |
0.618 |
|
2017 |
Rawlings MJ, Liebscher CH, Asta M, Dunand DC. Effect of titanium additions upon microstructure and properties of precipitation-strengthened Fe-Ni-Al-Cr ferritic alloys Acta Materialia. 128: 103-112. DOI: 10.1016/J.Actamat.2017.02.028 |
0.459 |
|
2017 |
Scotti KL, Northard EE, Plunk A, Tappan BC, Dunand DC. Directional solidification of aqueous TiO2 suspensions under reduced gravity Acta Materialia. 124: 608-619. DOI: 10.1016/J.Actamat.2016.11.038 |
0.316 |
|
2017 |
Erdeniz D, Nasim W, Malik J, Yost AR, Park S, De Luca A, Vo NQ, Karaman I, Mansoor B, Seidman DN, Dunand DC. Effect of vanadium micro-alloying on the microstructural evolution and creep behavior of Al-Er-Sc-Zr-Si alloys Acta Materialia. 124: 501-512. DOI: 10.1016/J.Actamat.2016.11.033 |
0.467 |
|
2016 |
Bocchini PJ, Sudbrack CK, Noebe RD, Dunand DC, Seidman DN. Microstructure and Creep Properties of Boron- and Zirconium-Containing Cobalt-based Superalloys. Materials Science & Engineering. a, Structural Materials : Properties, Microstructure and Processing. 682: 260-269. PMID 32020989 DOI: 10.1016/J.Msea.2016.10.124 |
0.611 |
|
2016 |
Vo NQ, Dunand DC, Seidman DN. Role of silicon in the precipitation kinetics of dilute Al-Sc-Er-Zr alloys Materials Science and Engineering A. 677: 485-495. DOI: 10.1016/J.Msea.2016.09.065 |
0.412 |
|
2016 |
De Luca A, Dunand DC, Seidman DN. Mechanical properties and optimization of the aging of a dilute Al-Sc-Er-Zr-Si alloy with a high Zr/Sc ratio Acta Materialia. 119: 35-42. DOI: 10.1016/J.Actamat.2016.08.018 |
0.623 |
|
2016 |
Sauza DJ, Bocchini PJ, Dunand DC, Seidman DN. Influence of ruthenium on microstructural evolution in a model Co Al W superalloy Acta Materialia. 117: 135-145. DOI: 10.1016/J.Actamat.2016.07.014 |
0.449 |
|
2016 |
Bewerse C, Brinson L, Dunand D. Porous shape-memory NiTi-Nb with microchannel arrays Acta Materialia. 115: 83-93. DOI: 10.1016/J.Actamat.2016.05.056 |
0.626 |
|
2016 |
Cho HH, Glazer MPB, Xu Q, Han HN, Dunand DC. Numerical and experimental investigation of (de)lithiation-induced strains in bicontinuous silicon-coated nickel inverse opal anodes Acta Materialia. 107: 289-297. DOI: 10.1016/J.Actamat.2016.01.064 |
0.379 |
|
2016 |
Paz y Puente A, Erdeniz D, Fife J, Dunand D. In situ X-ray tomographic microscopy of Kirkendall pore formation and evolution during homogenization of pack-aluminized Ni–Cr wires Acta Materialia. 103: 534-546. DOI: 10.1016/J.Actamat.2015.10.013 |
0.391 |
|
2016 |
Jo H, Kim MJ, Choi H, Sung Y, Choe H, Dunand DC. Morphological Study of Directionally Freeze-Cast Nickel Foams Metallurgical and Materials Transactions E. 3: 46-54. DOI: 10.1007/S40553-016-0068-Y |
0.355 |
|
2016 |
Vo NQ, Sorensen J, Klier EM, Sanaty-Zadeh A, Bayansan D, Seidman DN, Dunand DC. Development of a Precipitation-Strengthened Matrix for Non-quenchable Aluminum Metal Matrix Composites Jom. 1-10. DOI: 10.1007/S11837-016-1896-Z |
0.672 |
|
2016 |
Liu Q, Coakley J, Seidman DN, Dunand DC. Precipitate Evolution and Creep Behavior of a W-Free Co-based Superalloy Metallurgical and Materials Transactions A. 47: 6090-6096. DOI: 10.1007/S11661-016-3775-1 |
0.445 |
|
2016 |
Taylor SL, Jakus AE, Shah RN, Dunand DC. Iron and Nickel Cellular Structures by Sintering of 3D-Printed Oxide or Metallic Particle Inks Advanced Engineering Materials. DOI: 10.1002/Adem.201600365 |
0.374 |
|
2015 |
Song G, Sun Z, Li L, Xu X, Rawlings M, Liebscher CH, Clausen B, Poplawsky J, Leonard DN, Huang S, Teng Z, Liu CT, Asta MD, Gao Y, Dunand DC, et al. Ferritic Alloys with Extreme Creep Resistance via Coherent Hierarchical Precipitates. Scientific Reports. 5: 16327. PMID 26548303 DOI: 10.1038/Srep16327 |
0.433 |
|
2015 |
Philippe T, Erdeniz D, Dunand DC, Voorhees PW. A phase-field study of the aluminizing of nickel Philosophical Magazine. 95: 935-947. DOI: 10.1080/14786435.2015.1010622 |
0.409 |
|
2015 |
Erdeniz D, Sharp KW, Dunand DC. Transient liquid-phase bonded 3D woven Ni-based superalloys Scripta Materialia. 108: 60-63. DOI: 10.1016/J.Scriptamat.2015.06.016 |
0.4 |
|
2015 |
Bewerse C, Brinson LC, Dunand DC. Microstructure and mechanical properties of as-cast quasibinary NiTi-Nb eutectic alloy Materials Science and Engineering A. 627: 360-368. DOI: 10.1016/J.Msea.2014.12.090 |
0.681 |
|
2015 |
Bewerse C, Emery AA, Brinson LC, Dunand DC. NiTi porous structure with 3D interconnected microchannels using steel wire spaceholders Materials Science and Engineering A. 634: 153-160. DOI: 10.1016/J.Msea.2014.12.088 |
0.616 |
|
2015 |
Sepúlveda R, Plunk AA, Dunand DC. Microstructure of Fe2O3 scaffolds created by freeze-casting and sintering Materials Letters. 142: 56-59. DOI: 10.1016/J.Matlet.2014.11.155 |
0.331 |
|
2015 |
Yuan B, Zheng P, Gao Y, Zhu M, Dunand DC. Effect of directional solidification and porosity upon the superelasticity of Cu-Al-Ni shape-memory alloys Materials and Design. 80: 28-35. DOI: 10.1016/J.Matdes.2015.05.001 |
0.439 |
|
2015 |
Zheng P, Kucza NJ, Patrick CL, Müllner P, Dunand DC. Mechanical and magnetic behavior of oligocrystalline Ni-Mn-Ga microwires Journal of Alloys and Compounds. 624: 226-233. DOI: 10.1016/J.Jallcom.2014.11.067 |
0.364 |
|
2015 |
Wang ZL, Zheng P, Nie ZH, Ren Y, Wang YD, Müllner P, Dunand DC. Superelasticity by reversible variants reorientation in a Ni-Mn-Ga microwire with bamboo grains Acta Materialia. 99: 373-381. DOI: 10.1016/J.Actamat.2015.08.002 |
0.431 |
|
2015 |
Liebscher CH, Radmilovi? VR, Dahmen U, Vo NQ, Dunand DC, Asta M, Ghosh G. A hierarchical microstructure due to chemical ordering in the bcc lattice: Early stages of formation in a ferritic Fe-Al-Cr-Ni-Ti alloy Acta Materialia. 92: 220-232. DOI: 10.1016/J.Actamat.2015.03.043 |
0.358 |
|
2015 |
Witherspoon C, Zheng P, Chmielus M, Dunand DC, Müllner P. Effect of porosity on the magneto-mechanical behavior of polycrystalline magnetic shape-memory Ni-Mn-Ga foams Acta Materialia. 92: 64-71. DOI: 10.1016/J.Actamat.2015.03.038 |
0.337 |
|
2015 |
Zheng P, Kucza NJ, Wang Z, Müllner P, Dunand DC. Effect of directional solidification on texture and magnetic-field-induced strain in Ni–Mn–Ga foams with coarse grains Acta Materialia. 86: 95-101. DOI: 10.1016/J.Actamat.2014.12.005 |
0.374 |
|
2015 |
Young ML, Dunand DC. Comparing Compositions of Modern Cast Bronze Sculptures: Optical Emission Spectroscopy Versus x-Ray Fluorescence Spectroscopy Jom. 67: 1646-1658. DOI: 10.1007/S11837-015-1445-1 |
0.577 |
|
2015 |
Wang C, Dunand DC. Nanoscale Cellular Structures at Phase Boundaries of Ni-Cr-Al-Ti and Ni-Cr-Mo-Al-Ti Superalloys Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 46: 2680-2687. DOI: 10.1007/S11661-015-2831-6 |
0.424 |
|
2015 |
Wang C, Dunand DC. Microstructure Evolution During Al, Ti, and Mo Surface Deposition and Volume Diffusion in Ni-20Cr Wires and Woven Structures Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 46: 2249-2254. DOI: 10.1007/S11661-015-2794-7 |
0.43 |
|
2015 |
Wang L, Wang C, Dunand DC. Microstructure and Strength of NiTi-Nb Eutectic Braze Joining NiTi Wires Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 46: 1433-1436. DOI: 10.1007/S11661-015-2781-Z |
0.382 |
|
2015 |
Erdeniz D, Levinson AJ, Sharp KW, Rowenhorst DJ, Fonda RW, Dunand DC. Pack Aluminization Synthesis of Superalloy 3D Woven and 3D Braided Structures Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 46: 426-438. DOI: 10.1007/S11661-014-2602-9 |
0.456 |
|
2015 |
Glazer MPB, Cho J, Almer J, Okasinski J, Braun PV, Dunand DC. In Operando Strain Measurement of Bicontinuous Silicon-Coated Nickel Inverse Opal Anodes for Li-Ion Batteries Advanced Energy Materials. 5. DOI: 10.1002/Aenm.201500466 |
0.366 |
|
2015 |
Jakus AE, Taylor SL, Geisendorfer NR, Dunand DC, Shah RN. Metallic Architectures from 3D-Printed Powder-Based Liquid Inks Advanced Functional Materials. 25: 6985-6995. DOI: 10.1002/Adfm.201503921 |
0.325 |
|
2014 |
Singhal A, Stock SR, Almer JD, Dunand DC. Effect of cyclic loading on the nanoscale deformation of hydroxyapatite and collagen fibrils in bovine bone. Biomechanics and Modeling in Mechanobiology. 13: 615-26. PMID 23958833 DOI: 10.1007/S10237-013-0522-Z |
0.591 |
|
2014 |
Bansiddhi A, Dunand DC. Titanium and NiTi foams for bone replacement Bone Substitute Biomaterials. 142-179. DOI: 10.1533/9780857099037.2.142 |
0.807 |
|
2014 |
Bewerse C, Brinson LC, Dunand DC. NiTi with 3D-interconnected microchannels produced by liquid phase sintering and electrochemical dissolution of steel tubes Journal of Materials Processing Technology. 214: 1895-1899. DOI: 10.1016/J.Jmatprotec.2014.04.006 |
0.605 |
|
2014 |
Erdeniz D, Dunand DC. Microstructure development during pack aluminization of nickel and nickel-chromium wires Intermetallics. 50: 43-53. DOI: 10.1016/J.Intermet.2014.02.009 |
0.416 |
|
2014 |
Zheng P, Lindquist P, Yuan B, Müllner P, Dunand DC. Fabricating Ni–Mn–Ga microtubes by diffusion of Mn and Ga into Ni tubes Intermetallics. 49: 70-80. DOI: 10.1016/J.Intermet.2014.01.014 |
0.358 |
|
2014 |
Zhao L, Ha S, Sharp KW, Geltmacher AB, Fonda RW, Kinsey AH, Zhang Y, Ryan SM, Erdeniz D, Dunand DC, Hemker KJ, Guest JK, Weihs TP. Permeability measurements and modeling of topology-optimized metallic 3-D woven lattices Acta Materialia. 81: 326-336. DOI: 10.1016/J.Actamat.2014.08.037 |
0.303 |
|
2014 |
Krug ME, Mao Z, Seidman DN, Dunand DC. Comparison between dislocation dynamics model predictions and experiments in precipitation-strengthened Al-Li-Sc alloys Acta Materialia. 79: 382-395. DOI: 10.1016/J.Actamat.2014.06.038 |
0.822 |
|
2014 |
Vo NQ, Liebscher CH, Rawlings MJS, Asta M, Dunand DC. Creep properties and microstructure of a precipitation-strengthened ferritic Fe-Al-Ni-Cr alloy Acta Materialia. 71: 89-99. DOI: 10.1016/J.Actamat.2014.02.020 |
0.462 |
|
2014 |
Vo NQ, Dunand DC, Seidman DN. Improving aging and creep resistance in a dilute Al-Sc alloy by microalloying with Si, Zr and Er Acta Materialia. 63: 73-85. DOI: 10.1016/J.Actamat.2013.10.008 |
0.416 |
|
2014 |
Scott JA, Dunand DC. Effect of Oxidation on Creep Strength and Resistivity of Porous Fe-26Cr-1Mo Metallurgical and Materials Transactions E. 1: 303-310. DOI: 10.1007/S40553-014-0031-8 |
0.532 |
|
2014 |
Wang C, Dunand DC. Concurrent Growth of Kirkendall Pores and Vapor–Solid–Solid Protuberances on Ni Wires During Mo Vapor-Phase Deposition Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 45: 6252-6259. DOI: 10.1007/S11661-014-2587-4 |
0.331 |
|
2013 |
Singhal A, Deymier-Black AC, Almer JD, Dunand DC. Effect of stress and temperature on the micromechanics of creep in highly irradiated bone and dentin. Materials Science & Engineering. C, Materials For Biological Applications. 33: 1467-75. PMID 23827597 DOI: 10.1016/J.Msec.2012.12.069 |
0.603 |
|
2013 |
Deymier-Black AC, Singhal A, Yuan F, Almer JD, Brinson LC, Dunand DC. Effect of high-energy X-ray irradiation on creep mechanisms in bone and dentin. Journal of the Mechanical Behavior of Biomedical Materials. 21: 17-31. PMID 23454365 DOI: 10.1016/J.Jmbbm.2013.01.016 |
0.737 |
|
2013 |
Deymier-Black AC, Singhal A, Almer JD, Dunand DC. Effect of X-ray irradiation on the elastic strain evolution in the mineral phase of bovine bone under creep and load-free conditions. Acta Biomaterialia. 9: 5305-12. PMID 22871638 DOI: 10.1016/J.Actbio.2012.07.046 |
0.566 |
|
2013 |
Ye B, Matsen MR, Dunand DC. Enhanced densification of Ti-6Al-4V/TiC powder blends by transformation mismatch plasticity Journal of Materials Research. 28: 2520-2527. DOI: 10.1557/Jmr.2013.95 |
0.386 |
|
2013 |
Colombo P, Dunand DC, Kumar V. Porous materials: Less is more Journal of Materials Research. 28: 2187-2190. DOI: 10.1557/Jmr.2013.232 |
0.382 |
|
2013 |
Chen-Wiegart YCK, Wada T, Butakov N, Xiao X, Carlo FD, Kato H, Wang J, Dunand DC, Maire E. 3D morphological evolution of porous titanium by x-ray micro- and nano-tomography Journal of Materials Research. 28: 2444-2452. DOI: 10.1557/Jmr.2013.151 |
0.362 |
|
2013 |
Bocchini PJ, Lass EA, Moon KW, Williams ME, Campbell CE, Kattner UR, Dunand DC, Seidman DN. Atom-probe tomographic study of γ/γ′ interfaces and compositions in an aged Co-Al-W superalloy Scripta Materialia. 68: 563-566. DOI: 10.1016/J.Scriptamat.2012.11.035 |
0.426 |
|
2013 |
Scott JA, Dunand DC. Metallic sandwiches with open porosity facings and closed porosity cores for SOFC interconnects Materials Science and Engineering A. 585: 32-38. DOI: 10.1016/J.Msea.2013.06.086 |
0.58 |
|
2013 |
Guan ZP, Dunand DC. Compressive creep behavior of cast Bi2Te3 Materials Science and Engineering A. 565: 321-325. DOI: 10.1016/J.Msea.2012.12.052 |
0.398 |
|
2013 |
Cox ME, Dunand DC. Anisotropic mechanical properties of amorphous Zr-based foams with aligned, elongated pores Acta Materialia. 61: 5937-5948. DOI: 10.1016/J.Actamat.2013.06.028 |
0.618 |
|
2013 |
Chen-Wiegart YCK, Wang S, McNulty I, Dunand DC. Effect of Ag-Au composition and acid concentration on dealloying front velocity and cracking during nanoporous gold formation Acta Materialia. 61: 5561-5570. DOI: 10.1016/J.Actamat.2013.05.039 |
0.381 |
|
2013 |
Witherspoon C, Zheng P, Chmielus M, Vogel SC, Dunand DC, Müllner P. Texture and training of magnetic shape memory foam Acta Materialia. 61: 2113-2120. DOI: 10.1016/J.Actamat.2012.12.032 |
0.346 |
|
2013 |
Chen-Wiegart YCK, Wang S, Lee WK, McNulty I, Voorhees PW, Dunand DC. In situ imaging of dealloying during nanoporous gold formation by transmission X-ray microscopy Acta Materialia. 61: 1118-1125. DOI: 10.1016/J.Actamat.2012.10.017 |
0.308 |
|
2013 |
Hamilton B, Oppenheimer S, Dunand DC, Lewis D. Diffusion Bonding of Ti-6Al-4V Sheet with Ti-6Al-4V Foam for Biomedical Implant Applications Metallurgical and Materials Transactions B. 44: 1554-1559. DOI: 10.1007/S11663-013-9942-5 |
0.575 |
|
2013 |
Cox ME, Dunand DC. Acoustic emission analysis of damage during compressive deformation of amorphous Zr-based foams with aligned, elongated pores Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 44: 3114-3122. DOI: 10.1007/S11661-013-1691-1 |
0.607 |
|
2013 |
Singhal A, Yuan F, Stock SR, Almer JD, Brinson LC, Dunand DC. Evolution of phase strains during tensile loading of bovine cortical bone Advanced Engineering Materials. 15: 238-249. DOI: 10.1002/Adem.201200204 |
0.739 |
|
2012 |
Singhal A, Almer JD, Dunand DC. Variability in the nanoscale deformation of hydroxyapatite during compressive loading in bovine bone. Acta Biomaterialia. 8: 2747-58. PMID 22465576 DOI: 10.1016/J.Actbio.2012.03.036 |
0.587 |
|
2012 |
Deymier-Black AC, Almer JD, Stock SR, Dunand DC. Variability in the elastic properties of bovine dentin at multiple length scales. Journal of the Mechanical Behavior of Biomedical Materials. 5: 71-81. PMID 22100081 DOI: 10.1016/J.Jmbbm.2011.08.005 |
0.338 |
|
2012 |
Deymier-Black AC, Yuan F, Singhal A, Almer JD, Brinson LC, Dunand DC. Evolution of load transfer between hydroxyapatite and collagen during creep deformation of bone. Acta Biomaterialia. 8: 253-61. PMID 21878399 DOI: 10.1016/J.Actbio.2011.08.014 |
0.732 |
|
2012 |
DeFouw JD, Dunand DC. Processing and compressive creep of cast replicated IN792 Ni-base superalloy foams Materials Science and Engineering A. 558: 129-133. DOI: 10.1016/J.Msea.2012.07.099 |
0.821 |
|
2012 |
Krug ME, Seidman DN, Dunand DC. Creep properties and precipitate evolution in Al-Li alloys microalloyed with Sc and Yb Materials Science and Engineering A. 550: 300-311. DOI: 10.1016/J.Msea.2012.04.075 |
0.824 |
|
2012 |
Cox ME, Kecskes LJ, Mathaudhu SN, Dunand DC. Amorphous Hf-based foams with aligned, elongated pores Materials Science and Engineering A. 533: 124-127. DOI: 10.1016/J.Msea.2011.11.032 |
0.615 |
|
2012 |
Vo NQ, Dunand DC, Seidman DN. Atom probe tomographic study of a friction-stir-processed Al-Mg-Sc alloy Acta Materialia. 60: 7078-7089. DOI: 10.1016/J.Actamat.2012.09.015 |
0.443 |
|
2012 |
Booth-Morrison C, Mao Z, Diaz M, Dunand DC, Wolverton C, Seidman DN. Role of silicon in accelerating the nucleation of Al 3(Sc,Zr) precipitates in dilute Al-Sc-Zr alloys Acta Materialia. 60: 4740-4752. DOI: 10.1016/J.Actamat.2012.05.036 |
0.402 |
|
2012 |
Booth-Morrison C, Seidman DN, Dunand DC. Effect of Er additions on ambient and high-temperature strength of precipitation-strengthened Al-Zr-Sc-Si alloys Acta Materialia. 60: 3643-3654. DOI: 10.1016/J.Actamat.2012.02.030 |
0.456 |
|
2012 |
Young ML, Defouw JD, Frenzel J, Dunand DC. Cast-replicated NiTiCu foams with superelastic properties Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 43: 2939-2944. DOI: 10.1007/S11661-011-1060-X |
0.814 |
|
2012 |
Ye B, Matsen MR, Dunand DC. Finite-element modeling of titanium powder densification Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 43: 381-390. DOI: 10.1007/S11661-011-0839-0 |
0.411 |
|
2011 |
Singhal A, Deymier-Black AC, Almer JD, Dunand DC. Effect of high-energy X-ray doses on bone elastic properties and residual strains. Journal of the Mechanical Behavior of Biomedical Materials. 4: 1774-86. PMID 22098877 DOI: 10.1016/J.Jmbbm.2011.05.035 |
0.566 |
|
2011 |
Neurohr AJ, Dunand DC. Shape-memory NiTi with two-dimensional networks of micro-channels. Acta Biomaterialia. 7: 1862-72. PMID 21130189 DOI: 10.1016/J.Actbio.2010.11.038 |
0.352 |
|
2011 |
Dunand DC, Müllner P. Size effects on magnetic actuation in Ni-Mn-Ga shape-memory alloys. Advanced Materials (Deerfield Beach, Fla.). 23: 216-32. PMID 20957766 DOI: 10.1002/Adma.201002753 |
0.383 |
|
2011 |
Yuan F, Stock SR, Haeffner DR, Almer JD, Dunand DC, Brinson LC. A new model to simulate the elastic properties of mineralized collagen fibril. Biomechanics and Modeling in Mechanobiology. 10: 147-60. PMID 20521160 DOI: 10.1007/S10237-010-0223-9 |
0.641 |
|
2011 |
Ye B, Matsen MR, Dunand DC. Blended elemental powder densification of Ti-6Al-4V by hot pressing Journal of Materials Research. 26: 965-969. DOI: 10.1557/Jmr.2011.26 |
0.435 |
|
2011 |
Brothers AH, Mangrich B, Cox M, Dunand DC. Effect of crystalline metallic particles on the compressive behavior of a cellular amorphous metal Scripta Materialia. 64: 1031-1034. DOI: 10.1016/J.Scriptamat.2011.02.014 |
0.824 |
|
2011 |
Deymier-Black AC, Almer JD, Haeffner DR, Dunand DC. Effect of freeze-thaw cycles on load transfer between the biomineral and collagen phases in bovine dentin Materials Science and Engineering C. 31: 1423-1428. DOI: 10.1016/J.Msec.2011.05.011 |
0.338 |
|
2011 |
Cox ME, Dunand DC. Bulk gold with hierarchical macro-, micro- and nano-porosity Materials Science and Engineering A. 528: 2401-2406. DOI: 10.1016/J.Msea.2010.11.072 |
0.595 |
|
2011 |
Sasso CP, Zheng P, Basso V, Müllner P, Dunand DC. Enhanced field induced martensitic phase transition and magnetocaloric effect in Ni55Mn20Ga25 metallic foams Intermetallics. 19: 952-956. DOI: 10.1016/J.Intermet.2011.02.015 |
0.337 |
|
2011 |
van Dalen ME, Gyger T, Dunand DC, Seidman DN. Effects of Yb and Zr microalloying additions on the microstructure and mechanical properties of dilute Al–Sc alloys Acta Materialia. 59: 7615-7626. DOI: 10.1016/J.Actamat.2011.09.019 |
0.419 |
|
2011 |
Booth-Morrison C, Dunand DC, Seidman DN. Coarsening resistance at 400°C of precipitation-strengthened Al–Zr–Sc–Er alloys Acta Materialia. 59: 7029-7042. DOI: 10.1016/J.Actamat.2011.07.057 |
0.406 |
|
2011 |
Van Dalen ME, Dunand DC, Seidman DN. Microstructural evolution and creep properties of precipitation- strengthened Al-0.06Sc-0.02Gd and Al-0.06Sc-0.02Yb (at.%) alloys Acta Materialia. 59: 5224-5237. DOI: 10.1016/J.Actamat.2011.04.059 |
0.643 |
|
2011 |
Krug ME, Dunand DC. Modeling the creep threshold stress due to climb of a dislocation in the stress field of a misfitting precipitate Acta Materialia. 59: 5125-5134. DOI: 10.1016/J.Actamat.2011.04.044 |
0.816 |
|
2011 |
Neurohr AJ, Dunand DC. Mechanical anisotropy of shape-memory NiTi with two-dimensional networks of micro-channels Acta Materialia. 59: 4616-4630. DOI: 10.1016/J.Actamat.2011.04.007 |
0.373 |
|
2011 |
Monachon C, Krug ME, Seidman DN, Dunand DC. Chemistry and structure of core/double-shell nanoscale precipitates in Al-6.5Li-0.07Sc-0.02Yb (at.%) Acta Materialia. 59: 3398-3409. DOI: 10.1016/J.Actamat.2011.02.015 |
0.804 |
|
2011 |
Zhang XX, Witherspoon C, Müllner P, Dunand DC. Effect of pore architecture on magnetic-field-induced strain in polycrystalline Ni-Mn-Ga Acta Materialia. 59: 2229-2239. DOI: 10.1016/J.Actamat.2010.12.026 |
0.36 |
|
2011 |
Krug ME, Dunand DC, Seidman DN. Effects of Li additions on precipitation-strengthened Al-Sc and Al-Sc-Yb alloys Acta Materialia. 59: 1700-1715. DOI: 10.1016/J.Actamat.2010.11.037 |
0.817 |
|
2011 |
Knipling KE, Seidman DN, Dunand DC. Ambient- and high-temperature mechanical properties of isochronally aged Al-0.06Sc, Al-0.06Zr and Al-0.06Sc-0.06Zr (at.%) alloys Acta Materialia. 59: 943-954. DOI: 10.1016/J.Actamat.2010.10.017 |
0.741 |
|
2011 |
Jorgensen DJ, Dunand DC. Structure and mechanical properties of Ti-6Al-4V with a replicated network of elongated pores Acta Materialia. 59: 640-650. DOI: 10.1016/J.Actamat.2010.09.069 |
0.413 |
|
2011 |
Li JC, Dunand DC. Mechanical properties of directionally freeze-cast titanium foams Acta Materialia. 59: 146-158. DOI: 10.1016/J.Actamat.2010.09.019 |
0.398 |
|
2011 |
Bansiddhi A, Dunand DC. Processing of NiTi foams by transient liquid phase sintering Journal of Materials Engineering and Performance. 20: 511-516. DOI: 10.1007/S11665-010-9827-6 |
0.816 |
|
2011 |
Hong E, Ahn BY, Shoji D, Lewis JA, Dunand DC. Microstructure and Mechanical Properties of Reticulated Titanium Scrolls Advanced Engineering Materials. 13: 1122-1127. DOI: 10.1002/Adem.201100082 |
0.361 |
|
2011 |
Bansiddhi A, Dunand DC. Niobium wires as space holder and sintering aid for porous NiTi Advanced Engineering Materials. 13: 301-305. DOI: 10.1002/Adem.201000241 |
0.803 |
|
2010 |
Monachon C, Dunand DC, Seidman DN. Atomic-scale characterization of aluminum-based multishell nanoparticles created by solid-state synthesis. Small (Weinheim An Der Bergstrasse, Germany). 6: 1728-31. PMID 20665627 DOI: 10.1002/Smll.201000325 |
0.55 |
|
2010 |
Deymier-Black AC, Almer JD, Stock SR, Haeffner DR, Dunand DC. Synchrotron X-ray diffraction study of load partitioning during elastic deformation of bovine dentin. Acta Biomaterialia. 6: 2172-80. PMID 19925891 DOI: 10.1016/J.Actbio.2009.11.017 |
0.394 |
|
2010 |
Müllner P, Zhang X, Boonyongmaneerat Y, Witherspoon C, Chmielus M, Dunand DC. Recent developments in Ni-Mn-Ga foam research Materials Science Forum. 635: 119-124. DOI: 10.4028/Www.Scientific.Net/Msf.635.119 |
0.364 |
|
2010 |
Young ML, Casadio F, Marvin J, Chase WT, Dunand DC. An ancient chinese bronze fragment re-examined after 50 years: Contributions from modern and traditional techniques Archaeometry. 52: 1015-1043. DOI: 10.1111/J.1475-4754.2009.00512.X |
0.54 |
|
2010 |
Chmielus M, Witherspoon C, Wimpory RC, Paulke A, Hilger A, Zhang X, Dunand DC, Müllner P. Magnetic-field-induced recovery strain in polycrystalline Ni-Mn-Ga foam Journal of Applied Physics. 108. DOI: 10.1063/1.3524503 |
0.326 |
|
2010 |
Defouw JD, Dunand DC. Effect of processing variables on the reaction kinetics of MgB2 fibers Physica C: Superconductivity and Its Applications. 470: 648-653. DOI: 10.1016/J.Physc.2010.06.007 |
0.763 |
|
2010 |
Ye B, Dunand DC. Titanium foams produced by solid-state replication of NaCl powders Materials Science and Engineering A. 528: 691-697. DOI: 10.1016/J.Msea.2010.09.054 |
0.437 |
|
2010 |
Beeri O, Dunand DC, Seidman DN. Roles of impurities on precipitation kinetics of dilute Al-Sc alloys Materials Science and Engineering A. 527: 3501-3509. DOI: 10.1016/J.Msea.2010.02.027 |
0.634 |
|
2010 |
Jorgensen DJ, Dunand DC. Ti-6Al-4V with micro- and macropores produced by powder sintering and electrochemical dissolution of steel wires Materials Science and Engineering A. 527: 849-853. DOI: 10.1016/J.Msea.2009.08.034 |
0.42 |
|
2010 |
Hong E, Dunand DC, Choe H. Hydrogen-induced transformation superplasticity in zirconium International Journal of Hydrogen Energy. 35: 5708-5713. DOI: 10.1016/J.Ijhydene.2010.03.088 |
0.365 |
|
2010 |
Scott JA, Dunand DC. Processing and mechanical properties of porous Fe-26Cr-1Mo for solid oxide fuel cell interconnects Acta Materialia. 58: 6125-6133. DOI: 10.1016/J.Actamat.2010.07.030 |
0.597 |
|
2010 |
Knipling KE, Karnesky RA, Lee CP, Dunand DC, Seidman DN. Precipitation evolution in Al-0.1Sc, Al-0.1Zr and Al-0.1Sc-0.1Zr (at.%) alloys during isochronal aging Acta Materialia. 58: 5184-5195. DOI: 10.1016/J.Actamat.2010.05.054 |
0.817 |
|
2010 |
Oppenheimer S, Dunand DC. Solid-state foaming of Ti-6A1-4V by creep or superplastic expansion of argon-filled pores Acta Materialia. 58: 4387-4397. DOI: 10.1016/J.Actamat.2010.04.034 |
0.633 |
|
2010 |
Ye B, Matsen MR, Dunand DC. Enhanced densification of Ti-6Al-4V powders by transformation-mismatch plasticity Acta Materialia. 58: 3851-3859. DOI: 10.1016/j.actamat.2010.03.047 |
0.328 |
|
2010 |
Krug ME, Werber A, Dunand DC, Seidman DN. Core-shell nanoscale precipitates in Al-0.06 at.% Sc microalloyed with Tb, Ho, Tm or Lu Acta Materialia. 58: 134-145. DOI: 10.1016/J.Actamat.2009.08.074 |
0.804 |
|
2010 |
Cox ME, Mathaudhu SN, Hartwig KT, Dunand DC. Amorphous Zr-based foams with aligned, elongated pores Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 41: 1706-1713. DOI: 10.1007/S11661-009-0039-3 |
0.619 |
|
2010 |
Monachon C, Dunand DC, Seidman DN. Multishell nanoparticles: Atomic-Scale Characterization of Aluminum-Based Multishell Nanoparticles Created by Solid-State Synthesis (Small 16/2010) Small. 6: n/a-n/a. DOI: 10.1002/Smll.201090051 |
0.485 |
|
2009 |
Young ML, Schnepp S, Casadio F, Lins A, Meighan M, Lambert JB, Dunand DC. Matisse to Picasso: a compositional study of modern bronze sculptures. Analytical and Bioanalytical Chemistry. 395: 171-84. PMID 19629458 DOI: 10.1007/S00216-009-2938-Y |
0.59 |
|
2009 |
Deymier AC, Almer JD, Stock SR, Haeffner DR, Dunand DC. High Energy X-ray Diffraction Measurement of Load Transfer between Hydroxyapatite and Collagen in Bovine Dentin Mrs Proceedings. 1187. DOI: 10.1557/Proc-1187-Kk07-03 |
0.363 |
|
2009 |
Bansiddhi A, Dunand DC. Shape-memory NiTi-Nb foams Journal of Materials Research. 24: 2107-2117. DOI: 10.1557/Jmr.2009.0256 |
0.818 |
|
2009 |
Fife JL, Li JC, Dunand DC, Voorhees PW. Morphological analysis of pores in directionally freeze-cast titanium foams Journal of Materials Research. 24: 117-124. DOI: 10.1557/Jmr.2009.0023 |
0.339 |
|
2009 |
Chen Y, Zhang X, Dunand DC, Schuh CA. Shape memory and superelasticity in polycrystalline Cu–Al–Ni microwires Applied Physics Letters. 95: 171906. DOI: 10.1063/1.3257372 |
0.347 |
|
2009 |
Chmielus M, Zhang XX, Witherspoon C, Dunand DC, Müllner P. Giant magnetic-field-induced strains in polycrystalline Ni-Mn-Ga foams Nature Materials. 8: 863-866. DOI: 10.1038/Nmat2527 |
0.356 |
|
2009 |
Young M, Rao R, Almer J, Haeffner D, Lewis J, Dunand D. Effect of ceramic preform geometry on load partitioning in Al2O3–Al composites with three-dimensional periodic architecture Materials Science and Engineering: A. 526: 190-196. DOI: 10.1016/J.Msea.2009.07.033 |
0.623 |
|
2009 |
Beeri O, Dunand DC. Transformation mismatch plasticity in Pd induced by cyclic hydrogen charging Materials Science and Engineering A. 523: 178-183. DOI: 10.1016/J.Msea.2009.05.048 |
0.317 |
|
2009 |
Oppenheimer SM, Dunand DC. Porous NiTi by creep expansion of argon-filled pores Materials Science and Engineering A. 523: 70-76. DOI: 10.1016/J.Msea.2009.05.045 |
0.59 |
|
2009 |
Harada Y, Dunand DC. Microstructure of Al3Sc with ternary rare-earth additions Intermetallics. 17: 17-24. DOI: 10.1016/J.Intermet.2008.09.002 |
0.388 |
|
2009 |
DeFouw JD, Dunand DC. Superplastic compressive flow in MgB2 Acta Materialia. 57: 4745-4750. DOI: 10.1016/J.Actamat.2009.06.033 |
0.802 |
|
2009 |
van Dalen ME, Karnesky RA, Cabotaje JR, Dunand DC, Seidman DN. Erbium and ytterbium solubilities and diffusivities in aluminum as determined by nanoscale characterization of precipitates Acta Materialia. 57: 4081-4089. DOI: 10.1016/J.Actamat.2009.05.007 |
0.769 |
|
2009 |
Karnesky RA, Dunand DC, Seidman DN. Evolution of nanoscale precipitates in Al microalloyed with Sc and Er Acta Materialia. 57: 4022-4031. DOI: 10.1016/J.Actamat.2009.04.034 |
0.777 |
|
2009 |
Young M, Rao R, Almer J, Haeffner D, Lewis J, Dunand D. Load partitioning in Al2O3–Al composites with three-dimensional periodic architecture Acta Materialia. 57: 2362-2375. DOI: 10.1016/J.Actamat.2009.01.019 |
0.604 |
|
2009 |
Boonyongmaneerat Y, Dunand DC. Effects of strut geometry and pore fraction on creep properties of cellular materials Acta Materialia. 57: 1373-1384. DOI: 10.1016/J.Actamat.2008.11.027 |
0.373 |
|
2008 |
Sargeant TD, Oppenheimer SM, Dunand DC, Stupp SI. Titanium foam-bioactive nanofiber hybrids for bone regeneration. Journal of Tissue Engineering and Regenerative Medicine. 2: 455-62. PMID 18850672 DOI: 10.1002/Term.117 |
0.538 |
|
2008 |
Bansiddhi A, Dunand DC. Shape-memory NiTi foams produced by replication of NaCl space-holders. Acta Biomaterialia. 4: 1996-2007. PMID 18678532 DOI: 10.1016/J.Actbio.2008.06.005 |
0.809 |
|
2008 |
Bansiddhi A, Sargeant TD, Stupp SI, Dunand DC. Porous NiTi for bone implants: a review. Acta Biomaterialia. 4: 773-82. PMID 18348912 DOI: 10.1016/J.Actbio.2008.02.009 |
0.777 |
|
2008 |
Sargeant TD, Guler MO, Oppenheimer SM, Mata A, Satcher RL, Dunand DC, Stupp SI. Hybrid bone implants: self-assembly of peptide amphiphile nanofibers within porous titanium. Biomaterials. 29: 161-71. PMID 17936353 DOI: 10.1016/J.Biomaterials.2007.09.012 |
0.531 |
|
2008 |
Spoerke ED, Murray NG, Li H, Brinson LC, Dunand DC, Stupp SI. Titanium with aligned, elongated pores for orthopedic tissue engineering applications. Journal of Biomedical Materials Research. Part A. 84: 402-12. PMID 17618479 DOI: 10.1002/Jbm.A.31317 |
0.608 |
|
2008 |
Haeffner DR, Almer JD, Casadio F, Dunand DC, Newbury BD, Young ML. D-47 Cultural Heritage Studies with High-Energy X-rays at the APS 1-ID Beamline Powder Diffraction. 23: 176-176. DOI: 10.1154/1.2951688 |
0.485 |
|
2008 |
Choe H, Schuh CA, Dunand DC. Superplastic deformation induced by cyclic hydrogen charging Journal of Applied Physics. 103. DOI: 10.1063/1.2931003 |
0.353 |
|
2008 |
Krug ME, Dunand DC, Seidman DN. Composition profiles within Al3Li and Al3ScAl 3Li nanoscale precipitates in aluminum Applied Physics Letters. 92. DOI: 10.1063/1.2901150 |
0.824 |
|
2008 |
Boonyongmaneerat Y, Schuh CA, Dunand DC. Mechanical properties of reticulated aluminum foams with electrodeposited Ni-W coatings Scripta Materialia. 59: 336-339. DOI: 10.1016/J.Scriptamat.2008.03.035 |
0.335 |
|
2008 |
Knipling KE, Dunand DC. Creep resistance of cast and aged Al-0.1Zr and Al-0.1Zr-0.1Ti (at.%) alloys at 300-400 °C Scripta Materialia. 59: 387-390. DOI: 10.1016/J.Scriptamat.2008.02.059 |
0.743 |
|
2008 |
Choe H, Abkowitz S, Abkowitz SM, Dunand DC. Mechanical properties of Ti–W alloys reinforced with TiC particles Materials Science and Engineering: A. 485: 703-710. DOI: 10.1016/J.Msea.2008.01.069 |
0.408 |
|
2008 |
Couteau O, Dunand DC. Creep of aluminum syntactic foams Materials Science and Engineering A. 488: 573-579. DOI: 10.1016/J.Msea.2008.01.022 |
0.384 |
|
2008 |
Brothers AH, Dunand DC. Mechanical properties of a density-graded replicated aluminum foam Materials Science and Engineering A. 489: 439-443. DOI: 10.1016/J.Msea.2007.11.076 |
0.801 |
|
2008 |
DeFouw JD, Dunand DC. Mechanisms and kinetics of MgB2 synthesis from boron fibers Acta Materialia. 56: 5751-5763. DOI: 10.1016/J.Actamat.2008.07.049 |
0.774 |
|
2008 |
Erk KA, Dunand DC, Shull KR. Titanium with controllable pore fractions by thermoreversible gelcasting of TiH2 Acta Materialia. 56: 5147-5157. DOI: 10.1016/J.Actamat.2008.06.035 |
0.374 |
|
2008 |
Mueller R, Rossoll A, Weber L, Bourke M, Dunand D, Mortensen A. Tensile flow stress of ceramic particle-reinforced metal in the presence of particle cracking Acta Materialia. 56: 4402-4416. DOI: 10.1016/J.Actamat.2008.05.004 |
0.583 |
|
2008 |
van Dalen ME, Seidman DN, Dunand DC. Creep- and coarsening properties of Al-0.06 at.% Sc-0.06 at.% Ti at 300-450 °C Acta Materialia. 56: 4369-4377. DOI: 10.1016/J.Actamat.2008.05.002 |
0.481 |
|
2008 |
DeFouw JD, Quintana JP, Dunand DC. In situ X-ray synchrotron diffraction study of MgB2 synthesis from elemental powders Acta Materialia. 56: 1680-1688. DOI: 10.1016/J.Actamat.2007.12.014 |
0.781 |
|
2008 |
Knipling KE, Dunand DC, Seidman DN. Precipitation evolution in Al-Zr and Al-Zr-Ti alloys during aging at 450-600 °C Acta Materialia. 56: 1182-1195. DOI: 10.1016/J.Actamat.2007.11.011 |
0.73 |
|
2008 |
Knipling KE, Dunand DC, Seidman DN. Precipitation evolution in Al-Zr and Al-Zr-Ti alloys during isothermal aging at 375-425 °C Acta Materialia. 56: 114-127. DOI: 10.1016/J.Actamat.2007.09.004 |
0.735 |
|
2008 |
Chino Y, Dunand DC. Directionally freeze-cast titanium foam with aligned, elongated pores Acta Materialia. 56: 105-113. DOI: 10.1016/J.Actamat.2007.09.002 |
0.343 |
|
2008 |
Li Q, Chen EY, Bice DR, Dunand DC. Mechanical Properties of Cast Ti-6Al-4V Lattice Block Structures Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 39: 441-449. DOI: 10.1007/S11661-007-9440-Y |
0.45 |
|
2008 |
Li Q, Chen EY, Bice DR, Dunand DC. Mechanical properties of cast Ti-6AI-2Sn-4Zr-2Mo lattice block structures Advanced Engineering Materials. 10: 939-942. DOI: 10.1002/Adem.200800114 |
0.446 |
|
2008 |
Kwok P, Oppenheimer S, Dunand D. Porous Titanium by Electro-chemical Dissolution of Steel Space-holders Advanced Engineering Materials. 10: 820-825. DOI: 10.1002/Adem.200800072 |
0.561 |
|
2008 |
Boonyongmaneerat Y, Dunand DC. Ni-Mo-Cr foams processed by casting replication of sodium aluminate preforms Advanced Engineering Materials. 10: 379-383. DOI: 10.1002/Adem.200700300 |
0.427 |
|
2007 |
Boonyongmaneerat Y, Chmielus M, Dunand DC, Müllner P. Increasing magnetoplasticity in polycrystalline Ni-Mn-Ga by reducing internal constraints through porosity. Physical Review Letters. 99: 247201. PMID 18233476 DOI: 10.1103/Physrevlett.99.247201 |
0.357 |
|
2007 |
Knipling KE, Dunand DC, Seidman DN. Atom probe tomographic studies of precipitation in Al-0.1Zr-0.1Ti (at.%) alloys. Microscopy and Microanalysis : the Official Journal of Microscopy Society of America, Microbeam Analysis Society, Microscopical Society of Canada. 13: 503-16. PMID 18001515 DOI: 10.1017/S1431927607070882 |
0.783 |
|
2007 |
Matsumoto Y, Dunand DC. Density-Graded Aluminum Foams by the Corrosion Method Materials Science Forum. 1903-1908. DOI: 10.4028/Www.Scientific.Net/Msf.539-543.1903 |
0.309 |
|
2007 |
Harada Y, Dunand DC. Microstructure and hardness of scandium trialuminide with ternary rare-earth additions Materials Science Forum. 539: 1565-1570. DOI: 10.4028/Www.Scientific.Net/Msf.539-543.1565 |
0.355 |
|
2007 |
Brothers AH, Dunand DC. Porous and foamed amorphous metals Mrs Bulletin. 32: 639-643. DOI: 10.1557/Mrs2007.126 |
0.795 |
|
2007 |
Brothers AH, Dunand DC, Zheng Q, Xu J. Amorphous Mg-based metal foams with ductile hollow spheres Journal of Applied Physics. 102. DOI: 10.1063/1.2756043 |
0.795 |
|
2007 |
Dalen MV, Gyger T, Dunand D, Seidman D. Effects of Zr on the Microstructure and Mechanical Properties of Al-Sc-Yb Alloys Microscopy and Microanalysis. 13. DOI: 10.1017/S143192760707479X |
0.639 |
|
2007 |
OPPENHEIMER S, YUNG A, DUNAND D. Power-law creep in near-equiatomic nickel–titanium alloys Scripta Materialia. 57: 377-380. DOI: 10.1016/J.Scriptamat.2007.05.004 |
0.597 |
|
2007 |
Matsumoto Y, Brothers AH, Stock SR, Dunand DC. Uniform and graded chemical milling of aluminum foams Materials Science and Engineering A. 447: 150-157. DOI: 10.1016/J.Msea.2006.10.049 |
0.801 |
|
2007 |
Bansiddhi A, Dunand DC. Shape-memory NiTi foams produced by solid-state replication with NaF Intermetallics. 15: 1612-1622. DOI: 10.1016/J.Intermet.2007.06.013 |
0.813 |
|
2007 |
Daymond MR, Young ML, Almer JD, Dunand DC. Strain and texture evolution during mechanical loading of a crack tip in martensitic shape-memory NiTi Acta Materialia. 55: 3929-3942. DOI: 10.1016/J.Actamat.2007.03.013 |
0.555 |
|
2007 |
Oppenheimer SM, Dunand DC. Finite element modeling of creep deformation in cellular metals Acta Materialia. 55: 3825-3834. DOI: 10.1016/J.Actamat.2007.02.033 |
0.582 |
|
2007 |
Young ML, DeFouw J, Almer JD, Dunand DC. Load partitioning during compressive loading of a Mg/MgB2 composite Acta Materialia. 55: 3467-3478. DOI: 10.1016/J.Actamat.2007.01.046 |
0.793 |
|
2007 |
Young M, Almer J, Daymond M, Haeffner D, Dunand D. Load partitioning between ferrite and cementite during elasto-plastic deformation of an ultrahigh-carbon steel Acta Materialia. 55: 1999-2011. DOI: 10.1016/J.Actamat.2006.11.004 |
0.608 |
|
2007 |
Karnesky RA, Meng L, Dunand DC. Strengthening mechanisms in aluminum containing coherent Al3Sc precipitates and incoherent Al2O3 dispersoids Acta Materialia. 55: 1299-1308. DOI: 10.1016/J.Actamat.2006.10.004 |
0.781 |
|
2007 |
Knipling KE, Dunand DC, Seidman DN. Nucleation and precipitation strengthening in dilute Al-Ti and Al-Zr alloys Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 38: 2552-2563. DOI: 10.1007/S11661-007-9283-6 |
0.74 |
|
2007 |
Li Q, Chen EY, Bice DR, Dunand DC. Transformation Superplasticity of Cast Titanium and Ti-6Al-4V Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 38: 44-53. DOI: 10.1007/S11661-006-9020-6 |
0.45 |
|
2006 |
Karnesky RA, Seidman DN, Dunand DC. Creep of Al-Sc microalloys with rare-earth element additions Materials Science Forum. 519: 1035-1040. DOI: 10.4028/Www.Scientific.Net/Msf.519-521.1035 |
0.787 |
|
2006 |
Knipling KE, Dunand DC, Seidman DN. Criteria for developing castable, creep-resistant aluminum-based alloys - A review International Journal of Materials Research. 97: 246-265. DOI: 10.3139/146.101249 |
0.735 |
|
2006 |
Murray NGD, Dunand DC. Effect of initial preform porosity on solid-state foaming of titanium Journal of Materials Research. 21: 1175-1188. DOI: 10.1557/Jmr.2006.0140 |
0.366 |
|
2006 |
Wilkes T, Young M, Sepulveda R, Dunand D, Faber K. Composites by aluminum infiltration of porous silicon carbide derived from wood precursors Scripta Materialia. 55: 1083-1086. DOI: 10.1016/J.Scriptamat.2006.08.040 |
0.588 |
|
2006 |
Karnesky RA, van Dalen ME, Dunand DC, Seidman DN. Effects of substituting rare-earth elements for scandium in a precipitation-strengthened Al-0.08 at. %Sc alloy Scripta Materialia. 55: 437-440. DOI: 10.1016/J.Scriptamat.2006.05.021 |
0.783 |
|
2006 |
Brothers AH, Dunand DC. Amorphous metal foams Scripta Materialia. 54: 513-520. DOI: 10.1016/J.Scriptamat.2005.10.048 |
0.784 |
|
2006 |
Marvin JD, Dunand DC. Transformation-mismatch plasticity in sub-millimeter iron wires Materials Science and Engineering A. 421: 35-39. DOI: 10.1016/J.Msea.2005.10.014 |
0.361 |
|
2006 |
Shen H, Oppenheimer SM, Dunand DC, Brinson LC. Numerical modeling of pore size and distribution in foamed titanium Mechanics of Materials. 38: 933-944. DOI: 10.1016/J.Mechmat.2005.06.027 |
0.68 |
|
2006 |
Brothers AH, Prine DW, Dunand DC. Acoustic emissions analysis of damage in amorphous and crystalline metal foams Intermetallics. 14: 857-865. DOI: 10.1016/J.Intermet.2006.01.029 |
0.797 |
|
2006 |
Balch DK, Dunand DC. Load partitioning in aluminum syntactic foams containing ceramic microspheres Acta Materialia. 54: 1501-1511. DOI: 10.1016/J.Actamat.2005.11.017 |
0.777 |
|
2006 |
van Dalen ME, Dunand DC, Seidman DN. Nanoscale precipitation and mechanical properties of Al-0.06 at.% Sc alloys microalloyed with Yb or Gd Journal of Materials Science. 41: 7814-7823. DOI: 10.1007/S10853-006-0664-9 |
0.456 |
|
2006 |
Young M, Casadio F, Schnepp S, Almer J, Haeffner D, Dunand D. Synchrotron X-ray diffraction and imaging of ancient Chinese bronzes Applied Physics A. 83: 163-168. DOI: 10.1007/S00339-006-3504-5 |
0.524 |
|
2006 |
Brothers AH, Dunand DC. Density-graded cellular aluminum Advanced Engineering Materials. 8: 805-809. DOI: 10.1002/Adem.200600074 |
0.782 |
|
2005 |
Greiner C, Oppenheimer SM, Dunand DC. High strength, low stiffness, porous NiTi with superelastic properties. Acta Biomaterialia. 1: 705-16. PMID 16701851 DOI: 10.1016/J.Actbio.2005.07.005 |
0.613 |
|
2005 |
Spoerke ED, Murray NG, Li H, Brinson LC, Dunand DC, Stupp SI. A bioactive titanium foam scaffold for bone repair. Acta Biomaterialia. 1: 523-33. PMID 16701832 DOI: 10.1016/J.Actbio.2005.04.005 |
0.562 |
|
2005 |
Young M, DeFouw J, Dunand D, Almer J, Fezzaa K, Lee W, Haeffner D. D023 In-Situ Strain and Imaging Measurements of Superconducting Mg/MgB2 Composites Under Compressive Loading Powder Diffraction. 20: 177-177. DOI: 10.1154/1.1979042 |
0.535 |
|
2005 |
Young M, Dunand D, Almer J, Lienert U, Haeffner D. D022 Internal Strain Measurements in Ultrahigh-Carbon Steels Powder Diffraction. 20: 177-177. DOI: 10.1154/1.1968276 |
0.509 |
|
2005 |
Brothers AH, Scheunemann R, DeFouw JD, Dunand DC. Processing and structure of open-celled amorphous metal foams Scripta Materialia. 52: 335-339. DOI: 10.1016/J.Scriptamat.2004.10.002 |
0.786 |
|
2005 |
Choe H, Abkowitz SM, Abkowitz S, Dunand DC. Effect of tungsten additions on the mechanical properties of Ti-6Al-4V Materials Science and Engineering: A. 396: 99-106. DOI: 10.1016/J.Msea.2005.01.051 |
0.448 |
|
2005 |
Balch DK, O'Dwyer JG, Davis GR, Cady CM, Gray GT, Dunand DC. Plasticity and damage in aluminum syntactic foams deformed under dynamic and quasi-static conditions Materials Science and Engineering A. 391: 408-417. DOI: 10.1016/J.Msea.2004.09.012 |
0.774 |
|
2005 |
Choe H, Abkowitz SM, Abkowitz S, Dunand DC. Effect of tungsten dissolution on the mechanical properties of Ti–W composites Journal of Alloys and Compounds. 390: 62-66. DOI: 10.1016/J.Jallcom.2004.08.021 |
0.44 |
|
2005 |
Brothers AH, Dunand DC. Plasticity and damage in cellular amorphous metals Acta Materialia. 53: 4427-4440. DOI: 10.1016/J.Actamat.2005.06.002 |
0.805 |
|
2005 |
Van Dalen ME, Dunand DC, Seidman DN. Effects of Ti additions on the nanostructure and creep properties of precipitation-strengthened Al-Sc alloys Acta Materialia. 53: 4225-4235. DOI: 10.1016/J.Actamat.2005.05.022 |
0.478 |
|
2005 |
Brothers AH, Dunand DC. Ductile bulk metallic glass foams Advanced Materials. 17: 484-486. DOI: 10.1002/Adma.200400897 |
0.783 |
|
2004 |
Li H, Oppenheimer SM, Stupp SI, Dunand DC, Brinson LC. Effects of pore morphology and bone ingrowth on mechanical properties of microporous titanium as an orthopaedic implant material Materials Transactions. 45: 1124-1131. DOI: 10.2320/Matertrans.45.1124 |
0.692 |
|
2004 |
Marzik JV, Suplinskas RJ, Croft WJ, MoberlyChan WJ, DeFouw JD, Dunand DC. The Effect of Dopant Additions on the Microstructure of Boron Fibers Before and After Reaction to MgB2 Mrs Proceedings. 848: 239-244. DOI: 10.1557/Proc-848-Ff6.2 |
0.78 |
|
2004 |
Young ML, Almer JD, Lienert U, Fezzaa K, Lee W, Haeffner DR, Dunand DC. Internal Strain Measurements and X-ray Imaging in Interpenetrating-Phase Al2O3/Al Composites Mrs Proceedings. 840. DOI: 10.1557/Proc-840-Q7.10 |
0.615 |
|
2004 |
Gonzalez HJ, Dunand DC. Transformation Superplasticity in zircadyne 705 Journal of Materials Engineering and Performance. 13: 665-669. DOI: 10.1361/10599490421268 |
0.405 |
|
2004 |
Brothers AH, Dunand DC. Syntactic bulk metallic glass foam Applied Physics Letters. 84: 1108-1110. DOI: 10.1063/1.1646467 |
0.815 |
|
2004 |
Choe H, Dunand DC. Mechanical properties of oxidation-resistant Ni-Cr foams Materials Science and Engineering A. 384: 184-193. DOI: 10.1016/J.Msea.2004.06.045 |
0.439 |
|
2004 |
Yilmaz S, Dunand DC. Finite-element analysis of thermal expansion and thermal mismatch stresses in a Cu-60vol%ZrW2O8 composite Composites Science and Technology. 64: 1895-1898. DOI: 10.1016/J.Compscitech.2004.02.002 |
0.336 |
|
2004 |
Murray NGD, Dunand DC. Effect of thermal history on the superplastic expansion of argon-filled pores in titanium: Part I kinetics and microstructure Acta Materialia. 52: 2269-2278. DOI: 10.1016/J.Actamat.2004.01.039 |
0.375 |
|
2004 |
Murray NGD, Dunand DC. Effect of thermal history on the superplastic expansion of argon-filled pores in titanium: Part II modeling of kinetics Acta Materialia. 52: 2279-2291. DOI: 10.1016/J.Actamat.2004.01.019 |
0.378 |
|
2004 |
Choe H, Dunand DC. Synthesis, structure, and mechanical properties of Ni-Al and Ni-Cr-Al superalloy foams Acta Materialia. 52: 1283-1295. DOI: 10.1016/J.Actamat.2003.11.012 |
0.483 |
|
2004 |
Balch DK, Dunand DC. Copper-zirconium tungstate composites exhibiting low and negative thermal expansion influenced by reinforcement phase transformations Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 35: 1159-1165. DOI: 10.1007/S11661-004-1019-2 |
0.741 |
|
2004 |
Kouzeli M, Dunand DC. Effect of Temperature and Strain Rate on the Compressive Flow of Aluminum Composites Containing Submicron Alumina Particles Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 35: 287-292. DOI: 10.1007/S11661-004-0129-1 |
0.391 |
|
2004 |
Dunand DC. Processing of titanium foams Advanced Engineering Materials. 6: 369-376. DOI: 10.1002/Adem.200405576 |
0.335 |
|
2003 |
San Marchi C, Brothers A, Dunand DC. Melt infiltration processing of foams using glass-forming alloys Materials Research Society Symposium - Proceedings. 754: 199-204. DOI: 10.1557/Proc-754-Cc1.8 |
0.419 |
|
2003 |
Vaidyanathan R, Bourke MAM, Dunand DC. Investigating shape-memory alloys and composites with neutron-diffraction techniques Neutron News. 14: 19-22. DOI: 10.1080/10448630308218508 |
0.401 |
|
2003 |
DeFouw JD, Dunand DC. In situ synthesis of superconducting MgB2 fibers within a magnesium matrix Applied Physics Letters. 83: 120-122. DOI: 10.1063/1.1591243 |
0.769 |
|
2003 |
Schuster A, Voggenreiter HF, Dunand DC, Eggeler G. A new type of intrinsic two-way shape-memory effect in hooks of NiTi-wires Journal De Physique Iv (Proceedings). 112: 1177-1180. DOI: 10.1051/Jp4:20031092 |
0.537 |
|
2003 |
Vaidyanathan R, Bourke MA, Dunand DC. Anin situneutron diffraction mechanical study of superelastic NiTi and NiTi-TiC composites Journal De Physique Iv (Proceedings). 112: 823-826. DOI: 10.1051/Jp4:20031008 |
0.402 |
|
2003 |
San Marchi C, Kouzeli M, Rao R, Lewis J, Dunand D. Alumina–aluminum interpenetrating-phase composites with three-dimensional periodic architecture Scripta Materialia. 49: 861-866. DOI: 10.1016/S1359-6462(03)00441-X |
0.343 |
|
2003 |
Murray NGD, Schuh CA, Dunand DC. Solid-state foaming of titanium by hydrogen-induced internal-stress superplasticity Scripta Materialia. 49: 879-883. DOI: 10.1016/S1359-6462(03)00438-X |
0.431 |
|
2003 |
Harada Y, Dunand DC. Thermal expansion of Al3Sc and Al3(Sc0.75X0.25) Scripta Materialia. 48: 219-222. DOI: 10.1016/S1359-6462(02)00428-1 |
0.368 |
|
2003 |
Kouzeli M, Dunand DC. Effect of reinforcement connectivity on the elasto-plastic behavior of aluminum composites containing sub-micron alumina particles Acta Materialia. 51: 6105-6121. DOI: 10.1016/S1359-6454(03)00431-2 |
0.4 |
|
2003 |
Fuller CB, Seidman DN, Dunand DC. Mechanical properties of Al(Sc,Zr) alloys at ambient and elevated temperatures Acta Materialia. 51: 4803-4814. DOI: 10.1016/S1359-6454(03)00320-3 |
0.752 |
|
2003 |
Marquis EA, Seidman DN, Dunand DC. Effect of Mg addition on the creep and yield behavior of an Al-Sc alloy Acta Materialia. 51: 4751-4760. DOI: 10.1016/S1359-6454(03)00288-X |
0.664 |
|
2003 |
Marquis EA, Seidman DN, Dunand DC. Precipitation strengthening at ambient and elevated temperatures of heat-treatable Al(Sc) alloys [Acta Materialia 50(16), pp. 4021–4035] Acta Materialia. 51: 285-287. DOI: 10.1016/S1359-6454(02)00496-2 |
0.629 |
|
2003 |
Frary M, Abkowitz S, Abkowitz SM, Dunand DC. Microstructure and mechanical properties of Ti/W and Ti–6Al–4V/W composites fabricated by powder-metallurgy Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 344: 103-112. DOI: 10.1016/S0921-5093(02)00426-4 |
0.455 |
|
2003 |
Murray NGD, Dunand DC. Microstructure evolution during solid-state foaming of titanium Composites Science and Technology. 63: 2311-2316. DOI: 10.1016/S0266-3538(03)00264-1 |
0.372 |
|
2003 |
Balch DK, Üstündag E, Dunand DC. Diffraction strain measurements in a partially crystallized bulk metallic glass composite containing ductile particles Journal of Non-Crystalline Solids. 317: 176-180. DOI: 10.1016/S0022-3093(02)02008-2 |
0.756 |
|
2003 |
Hodge AM, Dunand DC. Measurement and modeling of creep in open-cell NiAl foams Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 34: 2353-2363. DOI: 10.1007/S11661-003-0298-3 |
0.612 |
|
2003 |
Balch DK, Üstündag E, Dunand DC. Elasto-plastic load transfer in bulk metallic glass composites containing ductile particles Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 34: 1787-1797. DOI: 10.1007/S11661-003-0145-6 |
0.741 |
|
2003 |
Choe H, Dunand DC. Creep of N1-Al and Ni-Cr-Al Superalloy Foams Materials Science and Technology 2003 Meeting. 35-41. |
0.327 |
|
2003 |
Fuller CB, Seidman DN, Dunand DC. Structure-mechanical property relationship for Al(Sc,Zr) alloys Tms Annual Meeting. 531-540. |
0.732 |
|
2003 |
Van Dalen ME, Dunand DC, Seidman DN. Precipitation Strengthening in Al (Sc,Ti) Alloys Materials Science and Technology 2003 Meeting. 195-201. |
0.326 |
|
2003 |
Marquis EA, Seidman DN, Dunand DC. Microstructure and creep of the Al-2Mg-0.2Sc alloy Tms Annual Meeting. 177-184. |
0.621 |
|
2003 |
Karnesky RA, Meng L, Seidman DN, Dunand DC. Mechanical Properties of a Heat-Treatable Al-Sc Alloy Reinforced with Al2O3 Dispersoids Materials Science and Technology 2003 Meeting. 215-224. |
0.792 |
|
2002 |
Dunand DC, Hodge AM, Schuh C. Pack aluminisation kinetics of nickel rods and foams Materials Science and Technology. 18: 326-332. DOI: 10.1179/026708302225001804 |
0.692 |
|
2002 |
Schuh CA, Dunand DC. Transformation superplasticity of water ice and ice containing SiO2particulates Journal of Geophysical Research: Planets. 107: 11-1-11-10. DOI: 10.1029/2001Je001840 |
0.334 |
|
2002 |
Marquis EA, Dunand DC. Model for creep threshold stress in precipitation-strengthened alloys with coherent particles Scripta Materialia. 47: 503-508. DOI: 10.1016/S1359-6462(02)00165-3 |
0.654 |
|
2002 |
Seidman DN, Marquis EA, Dunand DC. Precipitation strengthening at ambient and elevated temperatures of heat-treatable Al(Sc) alloys Acta Materialia. 50: 4021-4035. DOI: 10.1016/S1359-6454(02)00201-X |
0.659 |
|
2002 |
Schuh CA, Dunand DC. Enhanced densification of zinc powders through thermal cycling Acta Materialia. 50: 1349-1358. DOI: 10.1016/S1359-6454(01)00439-6 |
0.598 |
|
2002 |
Fuller CB, Krause AR, Dunand DC, Seidman DN. Microstructure and mechanical properties of a 5754 aluminum alloy modified by Sc and Zr additions Materials Science and Engineering A. 338: 8-16. DOI: 10.1016/S0921-5093(02)00056-4 |
0.779 |
|
2002 |
Zwigl P, Dunand DC. Transformation-mismatch plasticity of NiAl/ZrO2 composites-finite-element modeling Materials Science and Engineering A. 335: 128-136. DOI: 10.1016/S0921-5093(01)01901-3 |
0.397 |
|
2002 |
Harada Y, Dunand DC. Microstructure of Al3Sc with ternary transition-metal additions Materials Science and Engineering A. 329: 686-695. DOI: 10.1016/S0921-5093(01)01608-2 |
0.363 |
|
2002 |
Frary M, Schuh C, Dunand DC. Kinetics of biaxial dome formation by transformation superplasticity of titanium alloys and composites Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 33: 1669-1680. DOI: 10.1007/S11661-002-0176-4 |
0.652 |
|
2002 |
Schuh CA, Dunand DC. Transformation superplasticity of water ice and ice containing SiO2 particulates Journal of Geophysical Research E: Planets. 107: 11-1. |
0.529 |
|
2001 |
Dunand DC, Schuh C, Goldsby DL. Pressure-induced transformation plasticity of H(2)O ice. Physical Review Letters. 86: 668-71. PMID 11177908 DOI: 10.1103/Physrevlett.86.668 |
0.576 |
|
2001 |
Schuh C, Dunand DC. Transformation superplasticity of Ti-6Al-4V and Ti-6Al-4V/TiC composites at high stresses Materials Science Forum. 357: 177-182. DOI: 10.4028/Www.Scientific.Net/Msf.357-359.177 |
0.635 |
|
2001 |
Schuster A, Voggenreiter H, Balch DK, Dunand DC. Synchrotron x-ray study of texture in cold-worked shape-memory NiTi-wires Materials Research Society Symposium - Proceedings. 678. DOI: 10.1557/Proc-678-Ee2.6.1 |
0.748 |
|
2001 |
Balch DK, Üstündag E, Dunand DC. Synchrotron X-ray diffraction measurement of reinforcement strains in uniaxially stressed bulk metallic glass composites Materials Research Society Symposium - Proceedings. 678. DOI: 10.1557/Proc-678-Ee2.3.1 |
0.75 |
|
2001 |
Davis NG, Teisen J, Schuh C, Dunand DC. Solid-state foaming of titanium by superplastic expansion of argon-filled pores Journal of Materials Research. 16: 1508-1519. DOI: 10.1557/Jmr.2001.0210 |
0.748 |
|
2001 |
Schuh C, Dunand DC. Tensile fracture during transformation superplasticity of Ti–6Al–4V Journal of Materials Research. 16: 865-875. DOI: 10.1557/Jmr.2001.0115 |
0.624 |
|
2001 |
Wanner A, Dunand DC. Methodological aspects of the high-energy synchrotron x-ray diffraction technique for internal stress evaluation Journal of Neutron Research. 9: 495-501. DOI: 10.1080/10238160108200182 |
0.32 |
|
2001 |
Frary M, Schuh C, Dunand DC. Strain ratchetting of titanium upon reversible alloying with hydrogen Philosophical Magazine a: Physics of Condensed Matter, Structure, Defects and Mechanical Properties. 81: 197-212. DOI: 10.1080/01418610108216628 |
0.587 |
|
2001 |
Dunand DC. Synthesis of superconducting Mg/MgB2 composites Applied Physics Letters. 79: 4186-4188. DOI: 10.1063/1.1427439 |
0.343 |
|
2001 |
Schuh C, Dunand DC. An overview of power-law creep in polycrystalline β-titanium Scripta Materialia. 45: 1415-1421. DOI: 10.1016/S1359-6462(01)01178-2 |
0.553 |
|
2001 |
Schuh C, Dunand DC. Load transfer during transformation superplasticity of Ti-6Al-4V/TiB whisker-reinforced composites Scripta Materialia. 45: 631-638. DOI: 10.1016/S1359-6462(01)01072-7 |
0.657 |
|
2001 |
Schuh C, Dunand DC. Internal stress plasticity due to chemical stresses Acta Materialia. 49: 3387-3400. DOI: 10.1016/S1359-6454(01)00272-5 |
0.614 |
|
2001 |
Schuh C, Dunand DC. Non-isothermal transformation-mismatch plasticity: Modeling and experiments on Ti-6Al-4V Acta Materialia. 49: 199-210. DOI: 10.1016/S1359-6454(00)00318-9 |
0.608 |
|
2001 |
Hodge AM, Dunand DC. Synthesis of nickel-aluminide foams by pack-aluminization of nickel foams Intermetallics. 9: 581-589. DOI: 10.1016/S0966-9795(01)00047-4 |
0.612 |
|
2001 |
Zwigl P, Dunand DC. Internal-stress plasticity in titanium by cyclic alloying/dealloying with hydrogen Journal of Materials Processing Technology. 117: 409-417. DOI: 10.1016/S0924-0136(01)00801-9 |
0.379 |
|
2001 |
Han BQ, Dunand DC. Creep of magnesium strengthened with high volume fractions of yttria dispersoids Materials Science and Engineering A. 300: 235-244. DOI: 10.1016/S0921-5093(00)01781-0 |
0.431 |
|
2001 |
Zwigl P, Dunand DC. Transformation-mismatch plasticity of NiAl/ZrO2 composites - experiments and continuum modeling Materials Science and Engineering A. 298: 63-72. DOI: 10.1016/S0921-5093(00)01343-5 |
0.402 |
|
2001 |
Schuh C, Dunand DC. Whisker alignment of Ti-6Al-4V/TiB composites during deformation by transformation superplasticity International Journal of Plasticity. 17: 317-340. DOI: 10.1016/S0749-6419(00)00038-3 |
0.641 |
|
2001 |
Venkatesh TA, Dunand DC. Tertiary compression creep of long-fiber composites: A model for fiber kinking and buckling Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 32: 183-196. DOI: 10.1007/S11661-998-0336-2 |
0.358 |
|
2001 |
Dunand DC, Zwigl P. Hydrogen-induced internal-stress plasticity in titanium Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 32: 841-843. DOI: 10.1007/S11661-001-1019-4 |
0.364 |
|
2001 |
Vaidyanathan R, Bourke MAM, Dunand DC. Texture, strain, and phase-fraction measurements during mechanical cycling in superelastic NiTi Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 32: 777-786. DOI: 10.1007/S11661-001-1012-Y |
0.363 |
|
2001 |
Schuh C, Dunand DC. Tensile fracture during transformation superplasticity of Ti-6Al-4V Journal of Materials Research. 16: 865-875. |
0.605 |
|
2000 |
Üstündag E, Dragoi D, Clausen B, Brown D, Bourke MAM, Balch DK, Dunand DC. Internal Stresses in Bulk Metallic Glass Matrix Composites Mrs Proceedings. 644. DOI: 10.1557/Proc-644-L9.3 |
0.758 |
|
2000 |
Schuh C, Dunand DC. Assessing failure mechanisms during transformation superplasticity of Ti-6Al-4V Materials Research Society Symposium - Proceedings. 601: 55-60. DOI: 10.1557/Proc-601-55 |
0.638 |
|
2000 |
Wanner A, Dunand DC. Synchrotron X-ray study of elastic phase strains in the bulk of an externally loaded Cu/Mo composite Materials Research Society Symposium - Proceedings. 590: 157-162. DOI: 10.1557/Proc-590-157 |
0.403 |
|
2000 |
Dunand DC, Grabowski JL. Tensile transformation-mismatch plasticity of bismuth sesquioxide Journal of the American Ceramic Society. 83: 2521-2528. DOI: 10.1111/J.1151-2916.2000.Tb01585.X |
0.377 |
|
2000 |
Grabowski JL, Dunand DC. Tensile creep properties of δ-Bi2O3 Scripta Materialia. 43: 1033-1038. DOI: 10.1016/S1359-6462(00)00531-5 |
0.35 |
|
2000 |
Harada Y, Dunand DC. Creep properties of Al3Sc and Al3(Sc, X) intermetallics Acta Materialia. 48: 3477-3487. DOI: 10.1016/S1359-6454(00)00142-7 |
0.447 |
|
2000 |
Schuh C, Noël P, Dunand DC. Enhanced densification of metal powders by transformation-mismatch plasticity Acta Materialia. 48: 1639-1653. DOI: 10.1016/S1359-6454(00)00018-5 |
0.602 |
|
2000 |
Schuh C, Dunand DC, Wanner A, Clemens H. Thermal-cycling creep of γ-TiAl-based alloys Intermetallics. 8: 339-343. DOI: 10.1016/S0966-9795(99)00093-X |
0.62 |
|
2000 |
Han BQ, Dunand DC. Microstructure and mechanical properties of magnesium containing high volume fractions of yttria dispersoids Materials Science and Engineering A. 277: 297-304. DOI: 10.1016/S0921-5093(99)00074-X |
0.437 |
|
2000 |
Vaidyanathan R, Dunand DC, Ramamurty U. Fatigue crack-growth in shape-memory NiTi and NiTi-TiC composites Materials Science and Engineering A. 289: 208-216. DOI: 10.1016/S0921-5093(00)00882-0 |
0.324 |
|
2000 |
Schuh C, Han BQ, Dunand DC. Enhanced densification of cavitated dispersion-strengthened aluminum by thermal cycling Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 31: 2647-2657. DOI: 10.1007/S11661-000-0209-9 |
0.596 |
|
2000 |
Venkatesh TA, Dunand DC. Reactive infiltration processing and secondary compressive creep of NiAl and NiAl-W composites Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 31: 781-792. DOI: 10.1007/S11661-000-0020-7 |
0.429 |
|
2000 |
Wanner A, Dunand DC. Synchrotron X-ray study of bulk lattice strains in externally loaded Cu-Mo composites Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 31: 2949-2962. DOI: 10.1007/Bf02830344 |
0.383 |
|
1999 |
Holzer H, Dunand DC. Phase transformation and thermal expansion of Cu/ZrW2O8 metal matrix composites Journal of Materials Research. 14: 780-789. DOI: 10.1557/Jmr.1999.0104 |
0.38 |
|
1999 |
Vaidyanathan R, Bourke MAM, Dunand DC. Analysis of neutron diffraction spectra acquired in situ during stress-induced transformations in superelastic NiTi Journal of Applied Physics. 86: 3020-3029. DOI: 10.1063/1.371163 |
0.355 |
|
1999 |
Schuh C, Dunand DC. Contributions to transformation superplasticity of titanium from rigid particles and pressurized pores Scripta Materialia. 40: 1305-1312. DOI: 10.1016/S1359-6462(99)00068-8 |
0.594 |
|
1999 |
Han B, Agnew S, Dunand D. High-strain-rate deformation of pure aluminum reinforced with 25% alumina submicron particles near the solidus temperature Scripta Materialia. 40: 801-808. DOI: 10.1016/S1359-6462(99)00013-5 |
0.412 |
|
1999 |
Fuller CB, Seidman DN, Dunand DC. Creep properties of coarse-grained Al(Sc) alloys at 300 °C Scripta Materialia. 40: 691-696. DOI: 10.1016/S1359-6462(98)00468-0 |
0.736 |
|
1999 |
Venkatesh TA, Dunand DC. A model for the longitudinal primary creep of a long-fiber composite Acta Materialia. 47: 4275-4282. DOI: 10.1016/S1359-6454(99)00308-0 |
0.379 |
|
1999 |
Vaidyanathan R, Bourke MAM, Dunand DC. Phase fraction, texture and strain evolution in superelastic NiTi and NiTi-TiC composites investigated by neutron diffraction Acta Materialia. 47: 3353-3366. DOI: 10.1016/S1359-6454(99)00214-1 |
0.385 |
|
1999 |
Vaidyanathan R, Bourke MAM, Dunand DC. Stress-induced martensitic transformations in NiTi and NiTi–TiC composites investigated by neutron diffraction Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 404-409. DOI: 10.1016/S0921-5093(99)00307-X |
0.397 |
|
1999 |
Zwigl P, Dunand DC. A numerical model of transformation superplasticity for iron Materials Science and Engineering A. 262: 166-172. DOI: 10.1016/S0921-5093(98)00991-5 |
0.352 |
|
1999 |
Lefeuvre JM, Dunand DC. Thermo-elastic response of monolithic and composite plates to a thermal shock Mechanics of Materials. 31: 351-365. DOI: 10.1016/S0167-6636(99)00005-8 |
0.385 |
|
1999 |
Dunand DC, Han BQ, Jansen AM. Monkman-grant analysis of creep fracture in dispersion-strengthened and particulate-reinforced aluminum Metallurgical and Materials Transactions A. 30: 829-838. DOI: 10.1007/S11661-999-1016-6 |
0.433 |
|
1999 |
Daymond MR, Lund C, Bourke MAM, Dunand DC. Elastic Phase-Strain Distribution in a Particulate-Reinforced Metal-Matrix Composite Deforming by Slip or Creep Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 30: 2989-2997. DOI: 10.1007/S11661-999-0136-3 |
0.394 |
|
1999 |
Lakki A, Dunand DC. Creep of mechanically-alloyed NiAl containing 13 Vol % Mo or Mo2C dispersoids Materials Research Society Symposium - Proceedings. 552. |
0.348 |
|
1998 |
Lakki A, Dunand DC. Creep of Mechanically-Alloyed NiAl Containing 13 Vol % Mo or Mo2C Dispersoids Mrs Proceedings. 552. DOI: 10.1557/Proc-552-Kk9.2.1 |
0.459 |
|
1998 |
Dunand DC, Teisen J. Superplastic foaming of titanium and Ti-6Al-4V Materials Research Society Symposium - Proceedings. 521: 231-236. DOI: 10.1557/Proc-521-231 |
0.477 |
|
1998 |
Schuh C, Dunand D. Transformation superplasticity of super α2 titanium aluminide Acta Materialia. 46: 5663-5675. DOI: 10.1016/S1359-6454(98)00252-3 |
0.606 |
|
1998 |
Zwigl P, Dunand DC. Transformation superplasticity of zirconium Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 29: 2571-2582. DOI: 10.1007/S11661-998-0229-4 |
0.363 |
|
1998 |
Zwigl P, Dunand DC. Transformation superplasticity of iron and Fe/TiC metal matrix composites Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 29: 565-575. DOI: 10.1007/S11661-998-0138-6 |
0.377 |
|
1998 |
Schuh C, Dunand DC. Transformation superplasticity of super α2 titanium aluminide Acta Materialia. 46: 5663-5675. |
0.555 |
|
1997 |
Venkatesh TA, Sanmarchi CW, Mortensen A, Dunand DC. Reactive infiltration processing of bulk and fiber-reinforced NiAl Materials Research Society Symposium - Proceedings. 460: 737-742. DOI: 10.1557/Proc-460-737 |
0.57 |
|
1997 |
Zwigl P, Dunand DC. A non-linear model for internal stress superplasticity Acta Materialia. 45: 5285-5294. DOI: 10.1016/S1359-6454(97)00186-9 |
0.364 |
|
1997 |
Jansen A, Dunand D. Creep of metals containing high volume fractions of unshearable dispersoids—Part II. Experiments in the AlAl2O3 system and comparison to models Acta Materialia. 45: 4583-4592. DOI: 10.1016/S1359-6454(97)00136-5 |
0.411 |
|
1997 |
Dunand DC, Jansen AM. Creep of metals containing high volume fractions of unshearable dispersoids - Part I. Modeling the effect of dislocation pile-ups upon the detachment threshold stress Acta Materialia. 45: 4569-4581. DOI: 10.1016/S1359-6454(97)00135-3 |
0.366 |
|
1997 |
Dunand DC, Myojin S. Biaxial deformation of Ti-6Al-4V and Ti-6Al-4V/TiC composites by transformation-mismatch superplasticity Materials Science and Engineering A. 230: 25-32. DOI: 10.1016/S0921-5093(97)00033-6 |
0.47 |
|
1997 |
Jansen AM, Dunand DC. Creep of metals containing high volume fractions of unshearable dispersoids - Part II. Experiments in the Al-Al2O3 system and comparison to models Acta Materialia. 45: 4583-4592. |
0.306 |
|
1996 |
Dunand DC, Fukami-Ushiro KL, Mari D, Roberts JA, Bourke MA. Mechanical properties of NiTi-TiC shape-memory composites Mrs Proceedings. 459: 131-142. DOI: 10.1557/Proc-459-131 |
0.379 |
|
1996 |
Shelton RK, Dunand DC. Simulation by cellular automata of the crystallization of a matrix containing a mobile second phase Materials Research Society Symposium - Proceedings. 398: 457-462. DOI: 10.1557/Proc-321-295 |
0.301 |
|
1996 |
Bourke MAM, Vaidyanathan R, Dunand DC. Neutron diffraction measurement of stress‐induced transformation in superelastic NiTi Applied Physics Letters. 69: 2477-2479. DOI: 10.1063/1.117503 |
0.382 |
|
1996 |
Dunand DC, Bedell CM. Transformation-mismatch superplasticity in reinforced and unreinforced titanium Acta Materialia. 44: 1063-1076. DOI: 10.1016/1359-6454(95)00224-3 |
0.374 |
|
1996 |
Dunand DC, Mari D, Bourke MAM, Roberts JA. NiTi and NiTi-TiC composites: Part IV. Neutron diffraction study of twinning and shape-memory recovery Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 27: 2820-2836. DOI: 10.1007/Bf02652374 |
0.419 |
|
1996 |
Fukami-Ushiro KL, Dunand DC. NiTi and NiTi-TiC composites: Part III. Shape-memory recovery Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 27: 193-203. DOI: 10.1007/Bf02647759 |
0.359 |
|
1996 |
Fukami-Ushiro KL, Mari D, Dunand DC. NiTi and NiTi-TiC composites: Part II. Compressive mechanical properties Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 27: 183-191. DOI: 10.1007/Bf02647758 |
0.433 |
|
1995 |
Dunand DC, Mari D, Bourke MAM, Goldstone JA. Neutron diffraction study of NiTi during compressive deformation and after shape-memory recovery Journal De Physique Iv. 5. DOI: 10.2172/100006 |
0.356 |
|
1995 |
Mari D, Bataillard L, Dunand DC, Gotthardt R. Martensitic transformation of NiTi and NiTi-TiC composites Journal De Physique Iv. 5. DOI: 10.1051/Jp4/199558659 |
0.331 |
|
1995 |
Redsten AM, Klier EM, Brown AM, Dunand DC. Mechanical properties and microstructure of cast oxide-dispersion-strengthened aluminum Materials Science and Engineering A. 201: 88-102. DOI: 10.1016/0921-5093(94)09741-0 |
0.457 |
|
1995 |
Takahashi T, Dunand DC. Nickel aluminide containing refractory-metal dispersoids 2: Microstructure and properties Materials Science and Engineering A. 192: 195-203. DOI: 10.1016/0921-5093(94)03235-1 |
0.419 |
|
1995 |
Takahashi T, Dunand DC. Nickel aluminide containing refractory-metal dispersoids: 1: Synthesis by reactive mechanical alloying Materials Science and Engineering A. 192: 186-194. DOI: 10.1016/0921-5093(94)03234-3 |
0.431 |
|
1995 |
Mari D, Dunand DC. NiTi and NiTi-TiC composites: Part 1. transformation and thermal cycling behavior Metallurgical and Materials Transactions A. 26: 2833-2847. DOI: 10.1007/Bf02669642 |
0.347 |
|
1995 |
Thomin SH, NoËl PA, Dunand DC. Cracking mechanisms in thermally cycled Ti-6AI-4V reinforced with SiC fibers Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 26: 883-895. DOI: 10.1007/Bf02649085 |
0.32 |
|
1995 |
Redsten AM, Dunand DC. Creep properties and microstructure of aluminum containing 25 vol.% of submicron alumina dispersoids Tms Annual Meeting. 545-558. |
0.31 |
|
1994 |
Srichai MB, Dunand DC, Mortensen A. Calorimetry of deformed aluminum reinforced with alumina particles Scripta Metallurgica Et Materiala. 30: 1509-1514. DOI: 10.1016/0956-716X(94)90299-2 |
0.607 |
|
1994 |
Neubauer CM, Mari D, Dunand DC. Diffusion in the nickel-rhenium system Scripta Metallurgica Et Materiala. 31: 99-104. DOI: 10.1016/0956-716X(94)90102-3 |
0.396 |
|
1994 |
Noël PA, Dunand DC, Mortensen A. Initial-stage hot-pressing of SiC fibre/ Ti monotapes Composites. 25: 953-956. DOI: 10.1016/0010-4361(94)90111-2 |
0.59 |
|
1994 |
Dunand DC. NiAl formation by annealing of infiltrated aluminium-nickel precursors Journal of Materials Science. 29: 4056-4060. DOI: 10.1007/Bf00355969 |
0.333 |
|
1993 |
Taylor N, Dunand DC, Mortensen A. Initial stage hot pressing of monosized Ti and 90% Ti-10% TiC powders Acta Metallurgica Et Materialia. 41: 955-965. DOI: 10.1016/0956-7151(93)90030-V |
0.598 |
|
1993 |
Dunand DC, Sommer JL, Mortensen A. Synthesis of bulk and reinforced Metallurgical Transactions A. 24: 2161-2170. DOI: 10.1007/Bf02648590 |
0.624 |
|
1991 |
Dunand DC, Mortensen A. On the relaxation of a mismatching spheroid by prismatic loop punching Scripta Metallurgica Et Materiala. 25: 761-766. DOI: 10.1016/0956-716X(91)90221-L |
0.576 |
|
1991 |
Dunand DC, Mortensen A. Relaxed configuration of a row of punched prismatic dislocation loops Scripta Metallurgica Et Materiala. 25: 607-612. DOI: 10.1016/0956-716X(91)90100-F |
0.577 |
|
1991 |
Dunand DC, Mortensen A. On plastic relaxation of thermal stresses in reinforced metals Acta Metallurgica Et Materialia. 39: 127-139. DOI: 10.1016/0956-7151(91)90261-X |
0.618 |
|
1991 |
Dunand DC, Mortensen A. Dislocation emission at fibers-II. Experiments and microstructure of thermal punching Acta Metallurgica Et Materialia. 39: 1417-1429. DOI: 10.1016/0956-7151(91)90227-R |
0.553 |
|
1991 |
Dunand DC, Mortensen A. Dislocation emission at fibers-I. Theory of longitudinal punching by thermal stresses Acta Metallurgica Et Materialia. 39: 1405-1416. DOI: 10.1016/0956-7151(91)90226-Q |
0.559 |
|
1991 |
Dunand D, Mortensen A. Thermal mismatch dislocations produced by large particles in a strain-hardening matrix Materials Science and Engineering: A. 135: 179-184. DOI: 10.1016/0921-5093(91)90557-4 |
0.6 |
|
1991 |
Dunand DC, Mortensen A. Reinforced silver chloride as a model material for the study of dislocations in metal matrix composites Materials Science and Engineering A. 144: 179-188. DOI: 10.1016/0921-5093(91)90224-B |
0.603 |
|
1991 |
Li Q, Dunand DC, Mortensen A, Cornie JA. Interface structure in infiltrated composites of aluminum reinforced with alumina-silica fiber preforms Metallurgical Transactions. a, Physical Metallurgy and Materials Science. 22: 1126-1128. DOI: 10.1007/Bf02661109 |
0.602 |
|
1990 |
Dunand DC, Mortensen A. Longitudinal Relaxation of a Thermally Stressed Fiber by Prismatic Dislocation Punching Mrs Proceedings. 209. DOI: 10.1557/Proc-209-305 |
0.565 |
|
Show low-probability matches. |