Year |
Citation |
Score |
2020 |
Behera D, Roy P, Madenci E. Peridynamic correspondence model for finite elastic deformation and rupture in Neo-Hookean materials International Journal of Non-Linear Mechanics. 126: 103564. DOI: 10.1016/J.Ijnonlinmec.2020.103564 |
0.437 |
|
2020 |
Roy P, Behera D, Madenci E. Peridynamic simulation of finite elastic deformation and rupture in polymers Engineering Fracture Mechanics. 236: 107226. DOI: 10.1016/J.Engfracmech.2020.107226 |
0.386 |
|
2020 |
Mitts C, Naboulsi S, Przybyla C, Madenci E. Axisymmetric peridynamic analysis of crack deflection in a single strand ceramic matrix composite Engineering Fracture Mechanics. 235: 107074. DOI: 10.1016/J.Engfracmech.2020.107074 |
0.389 |
|
2020 |
Hu YL, Yu Y, Madenci E. Peridynamic modeling of composite laminates with material coupling and transverse shear deformation Composite Structures. 253: 112760. DOI: 10.1016/J.Compstruct.2020.112760 |
0.41 |
|
2019 |
Gu X, Zhang Q, Madenci E. Refined bond-based peridynamics for thermal diffusion Engineering Computations. 36: 2557-2587. DOI: 10.1108/Ec-09-2018-0433 |
0.31 |
|
2019 |
Madenci E, Dorduncu M, Phan N, Gu X. Weak form of bond-associated non-ordinary state-based peridynamics free of zero energy modes with uniform or non-uniform discretization Engineering Fracture Mechanics. 218: 106613. DOI: 10.1016/J.Engfracmech.2019.106613 |
0.355 |
|
2019 |
Gu X, Zhang Q, Madenci E. Non-ordinary state-based peridynamic simulation of elastoplastic deformation and dynamic cracking of polycrystal Engineering Fracture Mechanics. 218: 106568. DOI: 10.1016/J.Engfracmech.2019.106568 |
0.389 |
|
2019 |
Diyaroglu C, Madenci E, Phan N. Peridynamic homogenization of microstructures with orthotropic constituents in a finite element framework Composite Structures. 227: 111334. DOI: 10.1016/J.Compstruct.2019.111334 |
0.418 |
|
2019 |
Hasim KA, Kefal A, Madenci E. Isogeometric plate element for unstiffened and blade stiffened laminates based on refined zigzag theory Composite Structures. 222: 110931. DOI: 10.1016/J.Compstruct.2019.110931 |
0.434 |
|
2019 |
Gu X, Zhang Q, Madenci E, Xia X. Possible causes of numerical oscillations in non-ordinary state-based peridynamics and a bond-associated higher-order stabilized model Computer Methods in Applied Mechanics and Engineering. 357: 112592. DOI: 10.1016/J.Cma.2019.112592 |
0.322 |
|
2018 |
Diyaroglu C, Madenci E, Oterkus S, Oterkus E. A Novel Moisture Diffusion Modeling Approach Using Finite Element Analysis Electronics. 7: 438. DOI: 10.3390/Electronics7120438 |
0.673 |
|
2018 |
Madenci E, Dorduncu M, Barut A, Phan N. A state-based peridynamic analysis in a finite element framework Engineering Fracture Mechanics. 195: 104-128. DOI: 10.1016/J.Engfracmech.2018.03.033 |
0.459 |
|
2018 |
Hu Y, Chen H, Spencer BW, Madenci E. Thermomechanical peridynamic analysis with irregular non-uniform domain discretization Engineering Fracture Mechanics. 197: 92-113. DOI: 10.1016/J.Engfracmech.2018.02.006 |
0.397 |
|
2018 |
Gu X, Madenci E, Zhang Q. Revisit of non-ordinary state-based peridynamics Engineering Fracture Mechanics. 190: 31-52. DOI: 10.1016/J.Engfracmech.2017.11.039 |
0.376 |
|
2018 |
Madenci E, Barut A, Phan N. Peridynamic unit cell homogenization for thermoelastic properties of heterogenous microstructures with defects Composite Structures. 188: 104-115. DOI: 10.1016/J.Compstruct.2018.01.009 |
0.405 |
|
2018 |
Madenci E, Dorduncu M, Barut A, Phan N. Weak form of peridynamics for nonlocal essential and natural boundary conditions Computer Methods in Applied Mechanics and Engineering. 337: 598-631. DOI: 10.1016/J.Cma.2018.03.038 |
0.362 |
|
2017 |
Bang DJ, Madenci E. Peridynamic Modeling of Hyperelastic Membrane Deformation Journal of Engineering Materials and Technology. 139. DOI: 10.1115/1.4035875 |
0.377 |
|
2017 |
Hu Y, Madenci E, Phan N. Peridynamics for predicting damage and its growth in composites Fatigue & Fracture of Engineering Materials & Structures. 40: 1214-1226. DOI: 10.1111/Ffe.12618 |
0.301 |
|
2017 |
Diyaroglu C, Oterkus S, Oterkus E, Madenci E. Peridynamic Modeling of Diffusion by Using Finite-Element Analysis Ieee Transactions On Components, Packaging and Manufacturing Technology. 7: 1823-1831. DOI: 10.1109/Tcpmt.2017.2737522 |
0.655 |
|
2017 |
Diyaroglu C, Oterkus S, Oterkus E, Madenci E, Han S, Hwang Y. Peridynamic wetness approach for moisture concentration analysis in electronic packages Microelectronics Reliability. 70: 103-111. DOI: 10.1016/J.Microrel.2017.01.008 |
0.642 |
|
2017 |
Oterkus S, Madenci E, Oterkus E. Fully coupled poroelastic peridynamic formulation for fluid-filled fractures Engineering Geology. 225: 19-28. DOI: 10.1016/J.Enggeo.2017.02.001 |
0.644 |
|
2017 |
Oterkus S, Madenci E. Peridynamic modeling of fuel pellet cracking Engineering Fracture Mechanics. 176: 23-37. DOI: 10.1016/J.Engfracmech.2017.02.014 |
0.346 |
|
2017 |
Madenci E, Oterkus S. Ordinary state-based peridynamics for thermoviscoelastic deformation Engineering Fracture Mechanics. 175: 31-45. DOI: 10.1016/J.Engfracmech.2017.02.011 |
0.365 |
|
2017 |
Hu Y, Madenci E. Peridynamics for fatigue life and residual strength prediction of composite laminates Composite Structures. 160: 169-184. DOI: 10.1016/J.Compstruct.2016.10.010 |
0.395 |
|
2016 |
Madenci E, Oterkus S. Ordinary state-based peridynamics for plastic deformation according to von Mises yield criteria with isotropic hardening Journal of the Mechanics and Physics of Solids. 86: 192-219. DOI: 10.1016/J.Jmps.2015.09.016 |
0.366 |
|
2016 |
Hu YL, Madenci E. Bond-based peridynamic modeling of composite laminates with arbitrary fiber orientation and stacking sequence Composite Structures. 153: 139-175. DOI: 10.1016/J.Compstruct.2016.05.063 |
0.406 |
|
2016 |
Diyaroglu C, Oterkus E, Madenci E, Rabczuk T, Siddiq A. Peridynamic modeling of composite laminates under explosive loading Composite Structures. 144: 14-23. DOI: 10.1016/J.Compstruct.2016.02.018 |
0.659 |
|
2016 |
Madenci E, Barut A, Futch M. Peridynamic differential operator and its applications Computer Methods in Applied Mechanics and Engineering. 304: 408-451. DOI: 10.1016/J.Cma.2016.02.028 |
0.34 |
|
2015 |
Oterkus S, Madenci E. Peridynamics for antiplane shear and torsional deformations Journal of Mechanics of Materials and Structures. 10: 167-193. DOI: 10.2140/Jomms.2015.10.167 |
0.459 |
|
2015 |
Han S, Lim S, Bae J, Hwang Y, Lee S, Oterkus S, Madenci E, Diyaroglu C, Oterkus E. Equivalent acceleration assessment of JEDEC moisture sensitivity levels using peridynamics Proceedings - Electronic Components and Technology Conference. 2015: 1518-1523. DOI: 10.1109/ECTC.2015.7159799 |
0.612 |
|
2015 |
Madenci E, Colavito K, Phan N. Peridynamics for unguided crack growth prediction under mixed-mode loading Engineering Fracture Mechanics. DOI: 10.1016/J.Engfracmech.2016.04.009 |
0.802 |
|
2015 |
Hu YL, De Carvalho NV, Madenci E. Peridynamic modeling of delamination growth in composite laminates Composite Structures. 132: 610-620. DOI: 10.1016/J.Compstruct.2015.05.079 |
0.354 |
|
2015 |
Madenci E, Guven I. The finite element method and applications in engineering using ANSYS®, second edition The Finite Element Method and Applications in Engineering Using Ansys, Second Edition. 1-657. DOI: 10.1007/978-1-4899-7550-8 |
0.613 |
|
2015 |
Dorduncu M, Barut A, Madenci E. Ordinary-state based peridynamic truss element 56th Aiaa/Asce/Ahs/Asc Structures, Structural Dynamics, and Materials Conference. |
0.305 |
|
2014 |
Oterkus S, Madenci E, Oterkus E, Hwang Y, Bae J, Han S. Hygro-thermo-mechanical analysis and failure prediction in electronic packages by using peridynamics Proceedings - Electronic Components and Technology Conference. 973-982. DOI: 10.1109/ECTC.2014.6897407 |
0.655 |
|
2014 |
Oterkus S, Madenci E, Agwai A. Peridynamic thermal diffusion Journal of Computational Physics. 265: 71-96. DOI: 10.1016/J.Jcp.2014.01.027 |
0.764 |
|
2014 |
Diyaroglu C, Oterkus E, Oterkus S, Madenci E. Peridynamics for bending of beams and plates with transverse shear deformation International Journal of Solids and Structures. DOI: 10.1016/J.Ijsolstr.2015.04.040 |
0.671 |
|
2014 |
Boyce BL, Kramer SLB, Fang HE, Cordova TE, Neilsen MK, Dion K, Kaczmarowski AK, Karasz E, Xue L, Gross AJ, Ghahremaninezhad A, Ravi-Chandar K, Lin SP, Chi SW, Chen JS, ... ... Madenci E, et al. The sandia fracture challenge: Blind round robin predictions of ductile tearing International Journal of Fracture. 186: 5-68. DOI: 10.1007/S10704-013-9904-6 |
0.621 |
|
2014 |
Madenci E, Oterkus E. Peridynamic theory and its applications Peridynamic Theory and Its Applications. 2147483647: 1-289. DOI: 10.1007/978-1-4614-8465-3 |
0.595 |
|
2013 |
Colavito KW, Barut A, Madenci E, Phan N. Residual strength of composite laminates with a hole by using peridynamic theory 54th Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics, and Materials Conference. DOI: 10.2514/6.2013-1761 |
0.801 |
|
2013 |
Kilic B, Barut A, Madenci E. Post assembly warpage prediction using refined zigzag element Proceedings - Electronic Components and Technology Conference. 2255-2258. DOI: 10.1109/ECTC.2013.6575896 |
0.608 |
|
2013 |
Barut A, Madenci E, Tessler A. Prediction of composite laminate strength properties using a refined zigzag plate element Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. |
0.33 |
|
2012 |
Oterkus E, Madenci E. Peridynamic theory for damage initiation and growth in composite laminate Key Engineering Materials. 488: 355-358. DOI: 10.4028/Www.Scientific.Net/Kem.488-489.355 |
0.672 |
|
2012 |
Oterkus E, Guven I, Madenci E. Impact damage assessment by using peridynamic theory Central European Journal of Engineering. 2: 523-531. DOI: 10.2478/S13531-012-0025-1 |
0.773 |
|
2012 |
Oterkus E, Madenci E. Peridynamic analysis of fiber-reinforced composite materials Erkan Oterkus and Erdogan Madenci Journal of Mechanics of Materials and Structures. 7: 45-84. DOI: 10.2140/Jomms.2012.7.45 |
0.671 |
|
2012 |
Agwai A, Guven I, Madenci E. Drop-shock failure prediction in electronic packages by using peridynamic theory Ieee Transactions On Components, Packaging and Manufacturing Technology. 2: 439-447. DOI: 10.1109/Tcpmt.2011.2175924 |
0.808 |
|
2012 |
Agwai A, Guven I, Madenci E. Failure prediction in fully coupled thermal and deformational fields with peridynamics Proceedings - Electronic Components and Technology Conference. 1223-1232. DOI: 10.1109/ECTC.2012.6248991 |
0.796 |
|
2012 |
Agwai A, Guven I, Madenci E. Fully coupled peridynamic thermomechanics 53rd Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference 2012. DOI: 10.1016/J.Jmps.2013.10.011 |
0.775 |
|
2012 |
Agwai A, Guven I, Madenci E. Fully coupled peridynamic thermomechanics 53rd Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference 2012. DOI: 10.1016/j.jmps.2013.10.011 |
0.763 |
|
2012 |
Oterkus E, Madenci E, Weckner O, Silling S, Bogert P, Tessler A. Combined finite element and peridynamic analyses for predicting failure in a stiffened composite curved panel with a central slot Composite Structures. 94: 839-850. DOI: 10.1016/J.Compstruct.2011.07.019 |
0.695 |
|
2012 |
Oterkus E, Madenci E. Ordinary state-based peridynamic material constants Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. |
0.56 |
|
2012 |
Oterkus E, Madenci E. Peridynamics for failure prediction in composites 53rd Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference 2012. |
0.647 |
|
2012 |
Oterkus E, Barut A, Madenci E. Peridynamics based on principle of virtual work Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. |
0.648 |
|
2012 |
Colavito KW, Guven I, Madenci E. Fracture behavior of nanostructured materials through peridynamic theory Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. |
0.809 |
|
2012 |
Agwai A, Guven I, Madenci E. Fully coupled peridynamic thermomechanics 53rd Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference 2012. |
0.791 |
|
2012 |
Colavito KW, Guven I, Madenci E. Fracture behavior of nanostructured materials through peridynamic theory Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. |
0.803 |
|
2011 |
Celik E, Guven I, Madenci E. Mechanical characterization of nickel nanowires by using a customized atomic force microscope. Nanotechnology. 22: 155702. PMID 21389567 DOI: 10.1088/0957-4484/22/15/155702 |
0.729 |
|
2011 |
Barut A, Guven I, Madenci E. An analytical method for evaluating repairs in composite honeycomb structures Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. DOI: 10.2514/6.2011-1789 |
0.658 |
|
2011 |
Barut A, Guven I, Madenci E. An analytical method for evaluating bolted joint repairs in composite structures Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. DOI: 10.2514/6.2011-1733 |
0.645 |
|
2011 |
Barut A, Madenci E, Nemeth MP. Stress and buckling analyses of laminates with a cutout using a {3,0}-plate theory Journal of Mechanics of Materials and Structures. 6: 827-868. DOI: 10.2140/Jomms.2011.6.827 |
0.34 |
|
2011 |
Oterkus E, Madenci E. Damage prediction in graphene thermoplastics for potential electronic packaging applications Proceedings - Electronic Components and Technology Conference. 2134-2140. DOI: 10.1109/ECTC.2011.5898814 |
0.59 |
|
2011 |
Celik E, Guven I, Madenci E. Mechanical characterization of nickel nanowires by using a customized atomic microscope in scanning electron microscope Proceedings - Electronic Components and Technology Conference. 1999-2006. DOI: 10.1109/ECTC.2011.5898791 |
0.715 |
|
2011 |
Agwai A, Guven I, Madenci E. A new thermomechanical fracture analysis approach for 3D integration technology Proceedings - Electronic Components and Technology Conference. 740-745. DOI: 10.1109/ECTC.2011.5898595 |
0.777 |
|
2011 |
Yoon Kah L, Akoglu A, Guven I, Madenci E. High performance linear equation solver using NVIDIA GPUs Proceedings of the 2011 Nasa/Esa Conference On Adaptive Hardware and Systems, Ahs 2011. 367-374. DOI: 10.1109/AHS.2011.5963960 |
0.563 |
|
2011 |
Celik E, Guven I, Madenci E. Simulations of nanowire bend tests for extracting mechanical properties Theoretical and Applied Fracture Mechanics. 55: 185-191. DOI: 10.1016/J.Tafmec.2011.07.002 |
0.759 |
|
2011 |
Agwai A, Guven I, Madenci E. Crack propagation in multilayer thin-film structures of electronic packages using the peridynamic theory Microelectronics Reliability. 51: 2298-2305. DOI: 10.1016/J.Microrel.2011.05.011 |
0.8 |
|
2011 |
Madenci E, Barut A, Guven I. Stress analysis of bonded patch and scarf repairs in composite structures Composite Joints and Connections. 463-483. DOI: 10.1016/B978-1-84569-990-1.50016-8 |
0.658 |
|
2011 |
Madenci E, Barut A, Guven I. Stress analysis of bolted composite joints under multiaxial loading Composite Joints and Connections. 186-207. DOI: 10.1016/B978-1-84569-990-1.50005-3 |
0.639 |
|
2011 |
Agwai A, Guven I, Madenci E. Predicting crack propagation with peridynamics: A comparative study International Journal of Fracture. 171: 65-78. DOI: 10.1007/S10704-011-9628-4 |
0.805 |
|
2010 |
Kilic B, Madenci E. Coupling of peridynamic theory and the finite element method Journal of Mechanics of Materials and Structures. 5: 707-733. DOI: 10.2140/Jomms.2010.5.707 |
0.683 |
|
2010 |
Oterkus E, Agwai A, Guven I, Madenci E. Peridynamic theory for simulation of failure mechanisms in electronic packages Proceedings of the Asme Interpack Conference 2009, Ipack2009. 2: 63-68. DOI: 10.1115/InterPACK2009-89107 |
0.795 |
|
2010 |
Kilic B, Madenci E. Peridynamic theory for thermomechanical analysis Ieee Transactions On Advanced Packaging. 33: 97-105. DOI: 10.1109/TADVP.2009.2029079 |
0.659 |
|
2010 |
Oterkus E, Guven I, Madenci E. Fatigue failure model with peridynamic theory 2010 12th Ieee Intersociety Conference On Thermal and Thermomechanical Phenomena in Electronic Systems, Itherm 2010. DOI: 10.1109/ITHERM.2010.5501273 |
0.754 |
|
2010 |
Agwai A, Guven I, Madenci E. Predicting crack initiation and propagation using XFEM, CZM and peridynamics: A comparative study Proceedings - Electronic Components and Technology Conference. 1178-1185. DOI: 10.1109/ECTC.2010.5490851 |
0.821 |
|
2010 |
Kilic B, Madenci E. An adaptive dynamic relaxation method for quasi-static simulations using the peridynamic theory Theoretical and Applied Fracture Mechanics. 53: 194-204. DOI: 10.1016/J.Tafmec.2010.08.001 |
0.635 |
|
2010 |
Colavito KW, Madenci E. Adhesive failure in hybrid double cantilever beams by digital image correlation Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. |
0.792 |
|
2010 |
Celik E, Madenci E. Characterization of metallic nanowires by combining atomic force microscope (AFM) and scanning electron microscope (SEM) Nanotechnology 2010: Advanced Materials, Cnts, Particles, Films and Composites - Technical Proceedings of the 2010 Nsti Nanotechnology Conference and Expo, Nsti-Nanotech 2010. 1: 13-16. |
0.556 |
|
2010 |
Oterkus E, Guven I, Madenci E. Effect of core termination features on failure modes in sandwich panels by using peridynamic theory Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. |
0.743 |
|
2010 |
Oterkus E, Barut A, Madenci E. Damage growth prediction from loaded composite fastener holes by using peridynamic theory Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. |
0.669 |
|
2010 |
Agwai A, Guven I, Madenci E. Comparison of XFEM, CZM and PD for predicting crack initiation and propagation Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. |
0.812 |
|
2010 |
Vallone W, Guven I, Madenci E. Wind tunnel tests to modify a drag-type vertical axis wind turbine Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. |
0.536 |
|
2010 |
Celik E, Guven I, Madenci E. Mechanical characterization of nanowires using a customized atomic force microscope Society For Experimental Mechanics - Sem Annual Conference and Exposition On Experimental and Applied Mechanics 2010. 1: 223-232. |
0.561 |
|
2010 |
Celik E, Guven I, Madenci E. Mechanical characterization of nanowires using a customized atomic force microscope Society For Experimental Mechanics - Sem Annual Conference and Exposition On Experimental and Applied Mechanics 2010. 1: 223-232. |
0.71 |
|
2009 |
Agwai A, Guven I, Madenci E. Damage prediction for electronic package drop test using finite element method and peridynamic theory Proceedings - Electronic Components and Technology Conference. 565-569. DOI: 10.1109/ECTC.2009.5074069 |
0.82 |
|
2009 |
Celik E, Oterkus E, Guven I, Madenci E. Mechanical characterization of ultra-thin films by combining AFM nanoindentation tests and peridynamic simulations Proceedings - Electronic Components and Technology Conference. 262-268. DOI: 10.1109/ECTC.2009.5074026 |
0.785 |
|
2009 |
Kilic B, Madenci E. Structural stability and failure analysis using peridynamic theory International Journal of Non-Linear Mechanics. 44: 845-854. DOI: 10.1016/J.Ijnonlinmec.2009.05.007 |
0.663 |
|
2009 |
Kilic B, Agwai A, Madenci E. Peridynamic theory for progressive damage prediction in center-cracked composite laminates Composite Structures. 90: 141-151. DOI: 10.1016/J.Compstruct.2009.02.015 |
0.812 |
|
2009 |
Barut A, Madenci E. Analysis of bolted-bonded composite single-lap joints under combined in-plane and transverse loading Composite Structures. 88: 579-594. DOI: 10.1016/J.Compstruct.2008.06.003 |
0.399 |
|
2009 |
Das M, Oterkus E, Madenci E, Razi H. Residual strength of sandwich panels with hail damage Composite Structures. 88: 403-412. DOI: 10.1016/J.Compstruct.2008.05.002 |
0.75 |
|
2009 |
Das M, Barut A, Madenci E. Analysis of multibody systems experiencing large elastic deformations Multibody System Dynamics. 23: 1-31. DOI: 10.1007/S11044-009-9168-0 |
0.622 |
|
2009 |
Kilic B, Madenci E. Prediction of crack paths in a quenched glass plate by using peridynamic theory International Journal of Fracture. 156: 165-177. DOI: 10.1007/S10704-009-9355-2 |
0.649 |
|
2009 |
Barut A, Madenci E. Progressive micro-damage in composite laminates using a higher order plate element Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. |
0.329 |
|
2009 |
Kilic B, Madenci E. Coupling of peridynamic theory and finite element method Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. |
0.648 |
|
2009 |
Colavito KW, Gorman J, Madenci E, Smeltzer SS. Refinements in digital image correlation technique to extract adhesive strains in lap joints Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. |
0.795 |
|
2008 |
Das M, Madenci E, Ambur D. Three-dimensional nonlinear analyses of scarf repair in composite laminates and sandwich panels Journal of Mechanics of Materials and Structures. 3: 1641-1658. DOI: 10.2140/Jomms.2008.3.1641 |
0.657 |
|
2008 |
Agwai A, Guven I, Madenci E. Peridynamic theory for failure prediction in multilayer thin-film structures of electronic packages Proceedings - Electronic Components and Technology Conference. 1614-1619. DOI: 10.1109/ECTC.2008.4550192 |
0.803 |
|
2008 |
Agwai A, Guven I, Madenci E. Peridynamic theory for impact damage prediction and propagation in electronic packages due to drop Proceedings - Electronic Components and Technology Conference. 1048-1053. DOI: 10.1109/ECTC.2008.4550105 |
0.801 |
|
2008 |
Gordnian K, Hadavinia H, Mason PJ, Madenci E. Determination of fracture energy and tensile cohesive strength in Mode I delamination of angle-ply laminated composites Composite Structures. 82: 577-586. DOI: 10.1016/J.Compstruct.2007.02.008 |
0.363 |
|
2007 |
Kilic B, Madenci E. Hypersingular integral equations for the solution of penny-shaped interface crack problems Journal of Mechanics of Materials and Structures. 2: 729-752. DOI: 10.2140/Jomms.2007.2.729 |
0.651 |
|
2007 |
Celik E, Guven I, Madenci E. Experimental and numerical characterization of non-Fickian moisture diffusion in electronic packages Proceedings - Electronic Components and Technology Conference. 1069-1073. DOI: 10.1109/Tadvp.2009.2016848 |
0.712 |
|
2007 |
Oterkus E, Barut A, Madenci E, Ambur DR. Analysis of bolted-bonded composite lap joints Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. 6: 5750-5776. |
0.663 |
|
2007 |
Agwai A, Guven I, Madenci E, Kepler J. A combined experimental and numerical analysis of sandwich panels subjected to ballistic loads Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. 4: 3641-3649. |
0.78 |
|
2006 |
Kay NR, Ghosh S, Guven I, Madenci E. A combined experimental and analytical approach for interface fracture parameters of dissimilar materials in electronic packages Materials Science and Engineering A. 421: 57-67. DOI: 10.1016/J.Msea.2005.10.013 |
0.791 |
|
2006 |
Oterkus E, Barut A, Madenci E, Smeltzer SS, Ambur DR. Bonded lap joints of composite laminates with tapered edges International Journal of Solids and Structures. 43: 1459-1489. DOI: 10.1016/J.Ijsolstr.2005.07.035 |
0.652 |
|
2006 |
Kilic B, Madenci E, Mahajan R. Energy release rate and contact zone in a cohesive and an interface crack by hypersingular integral equations International Journal of Solids and Structures. 43: 1159-1188. DOI: 10.1016/J.Ijsolstr.2005.06.005 |
0.641 |
|
2006 |
Kilic B, Madenci E, Ambur DR. Influence of adhesive spew in bonded single-lap joints Engineering Fracture Mechanics. 73: 1472-1490. DOI: 10.1016/J.Engfracmech.2005.12.015 |
0.601 |
|
2006 |
Madenci E, Guven I. The finite element method and applications in engineering using Ansys® The Finite Element Method and Applications in Engineering Using Ansys®. 1-686. DOI: 10.1007/978-0-387-28290-9 |
0.59 |
|
2006 |
Das M, Barut A, Madenci E, Ambur DR. A triangular plate element for thermo-elastic analysis of sandwich panels with a functionally graded core International Journal For Numerical Methods in Engineering. 68: 940-966. DOI: 10.1002/Nme.1724 |
0.618 |
|
2006 |
Barut A, Guven I, Madenci E. A meshless grain element for micromechanical analysis with crystal plasticity International Journal For Numerical Methods in Engineering. 67: 17-65. DOI: 10.1002/Nme.1623 |
0.634 |
|
2006 |
Barut A, Madenci E. A semi-analytical approach for predicting the post-buckling response of laminates with a cutout Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. 4: 2328-2353. |
0.311 |
|
2006 |
Barut A, Madenci E. Buckling analysis of laminates with a cutout using a zeroth-order shear deformation theory Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. 4: 2298-2327. |
0.309 |
|
2006 |
Oterkus E, Madenci E, Ambur DR. Validated analysis method for bolted composite lap joints Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. 11: 8015-8027. |
0.655 |
|
2006 |
Guven I, Celik E, Madenci E. Transient response of composite sandwich panels subjected to blast wave pressure Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. 7: 5052-5061. |
0.702 |
|
2006 |
Kilic B, Madenci E, Ambur DR. Analysis of brazed single-lap joints using the peridynamics theory Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. 11: 7974-7981. |
0.618 |
|
2006 |
Oterkus E, Madenci E, Smeltzer SS, Ambur DR. Thermo-mechanical analysis of bonded cylindrically curved composite shell structures Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. 7: 4514-4539. |
0.653 |
|
2005 |
Oterkus E, Barut A, Madenci E, Ambur DR. Nonlinear analysis of a composite panel with a cutout repaired by a bonded tapered composite patch International Journal of Solids and Structures. 42: 5274-5306. DOI: 10.1016/J.Ijsolstr.2005.02.024 |
0.611 |
|
2005 |
Kradinov V, Madenci E, Ambur DR. Bolted lap joints of laminates with varying thickness and metallic inserts Composite Structures. 68: 75-85. DOI: 10.1016/J.Compstruct.2004.03.002 |
0.367 |
|
2005 |
Das M, Barut A, Madenci E, Ambur D. Complete stress field in sandwich panels with a new triangular finite element of single-layer theory Computer Methods in Applied Mechanics and Engineering. 194: 2969-3005. DOI: 10.1016/J.Cma.2004.07.033 |
0.635 |
|
2005 |
Kilic B, Madenci E. Analysis of blister tests by using hypersingular integral equations Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. 9: 6358-6375. |
0.648 |
|
2005 |
Das M, Guven I, Madenci E. Coupled BEM and FEM analysis of functionally graded underfill layers in electronic packages Proceedings - Electronic Components and Technology Conference. 1: 995-1005. |
0.65 |
|
2005 |
Oterkus E, Madenci E, Smeltzer SS, Ambur DR. Nonlinear analysis of bonded composite tubular lap joints Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. 10: 7043-7056. |
0.643 |
|
2004 |
Guven I, Kradinov V, Tor JL, Madenci E. Strain energy density criterion for reliability life prediction of solder joints in electronic packaging Journal of Electronic Packaging, Transactions of the Asme. 126: 398-405. DOI: 10.1115/1.1773855 |
0.651 |
|
2004 |
Kradinov V, Madenci E, Ambur DR. Combined in-plane and through-the-thickness analysis for failure prediction of bolted composite joints Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. 3: 2099-2122. DOI: 10.1016/J.Compstruct.2005.06.008 |
0.446 |
|
2004 |
Oterkus E, Barut A, Madenci E. Buckling of composite plates with a reinforced circular cutout subjected to uniform and non-uniform compression Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. 3: 2269-2284. |
0.641 |
|
2004 |
Kilic B, Madenci E, Ambur DR. Global-local finite element analysis of bonded single-lap joints Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. 1: 542-554. |
0.602 |
|
2004 |
Das M, Guven I, Madenci E. Three-dimensional analysis of sandwich panels with common defects Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. 5: 3519-3525. |
0.656 |
|
2003 |
Mahajan R, Erdogan F, Kilic B, Madenci E. Cracking of an orthotropic substrate reinforced by an orthotropic plate International Journal of Solids and Structures. 40: 6389-6415. DOI: 10.1016/S0020-7683(03)00421-9 |
0.647 |
|
2003 |
Guven I, Madenci E. Transient heat conduction analysis in a piecewise homogeneous domain by a coupled boundary and finite element method International Journal For Numerical Methods in Engineering. 56: 351-380. DOI: 10.1002/Nme.570 |
0.646 |
|
2003 |
Guven I, Madenci E. Thermoelastic stress field in a piece-wise homogeneous domain under non-uniform temperature using a coupled boundary and finite element method International Journal For Numerical Methods in Engineering. 56: 381-403. DOI: 10.1002/Nme.569 |
0.657 |
|
2003 |
Guven I, Madenci E. Stress analysis of a surface crack perpendicular to the interface of dissimilar materials by boundary element method Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. 7: 5396-5405. |
0.652 |
|
2003 |
Guven I, Kradinov V, Madenci E, Tor JL. Solder joint life prediction model based on the strain energy density criterion Proceedings - Electronic Components and Technology Conference. 214-220. |
0.617 |
|
2002 |
Guven I, Madenci E, Chan CL. Transient two-dimensional heat conduction analysis of electronic packages by coupled boundary and finite element methods Ieee Transactions On Components and Packaging Technologies. 25: 684-694. DOI: 10.1109/Tcapt.2002.808012 |
0.647 |
|
2002 |
Descour MR, Kärkkäinen AHO, Rogers JD, Liang C, Weinstein RS, Rantala JT, Kilic B, Madenci E, Richards-Kortum RR, Anslyn EV, Dupuis RD, Schul RJ, Willison CG, Tigges CP. Toward the development of miniaturized imaging systems for detection of pre-cancer Ieee Journal of Quantum Electronics. 38: 122-130. DOI: 10.1109/3.980264 |
0.56 |
|
2002 |
Barut A, Madenci E, Anderson T, Tessler A. Equivalent single-layer theory for a complete stress field in sandwich panels under arbitrarily distributed loading Composite Structures. 58: 483-495. DOI: 10.1016/S0263-8223(02)00137-X |
0.359 |
|
2002 |
Kradinov V, Hanauska J, Barut A, Madenci E, Ambur D. Bolted patch repair of composite panels with a cutout Composite Structures. 56: 423-444. DOI: 10.1016/S0263-8223(02)00027-2 |
0.341 |
|
2002 |
Barut A, Hanauska J, Madenci E, Ambur D. Analysis method for bonded patch repair of a skin with a cutout Composite Structures. 55: 277-294. DOI: 10.1016/S0263-8223(01)00158-1 |
0.329 |
|
2002 |
Kay N, Barut A, Madenci E. Singular stresses in a finite region of two dissimilar viscoelastic materials with traction-free edges Computer Methods in Applied Mechanics and Engineering. 191: 1221-1244. DOI: 10.1016/S0045-7825(01)00322-X |
0.363 |
|
2001 |
Madenci E, Barut A, Nemeth MP. A complex potential-variational method for stress analysis of unsymmetric laminates with an elliptical cutout Journal of Applied Mechanics, Transactions Asme. 68: 731-739. DOI: 10.1115/1.1379528 |
0.397 |
|
2001 |
Hanauska J, Kradinov V, Madenci E. A composite double-lap joint with staggered bolts: An experimental and analytical investigation Composite Structures. 54: 3-15. DOI: 10.1016/S0263-8223(01)00064-2 |
0.401 |
|
2001 |
Barut A, Guven I, Madenci E. Analysis of singular stress fields at junctions of multiple dissimilar materials under mechanical and thermal loading International Journal of Solids and Structures. 38: 9077-9109. DOI: 10.1016/S0020-7683(01)00206-2 |
0.671 |
|
2001 |
Kradinov V, Barut A, Madenci E, Ambur D. Bolted double-lap composite joints under mechanical and thermal loading International Journal of Solids and Structures. 38: 7801-7837. DOI: 10.1016/S0020-7683(01)00128-7 |
0.381 |
|
2001 |
Barut A, Madenci E, Heinrich J, Tessler A. Analysis of thick sandwich construction by a 3,2-order theory International Journal of Solids and Structures. 38: 6063-6077. DOI: 10.1016/S0020-7683(00)00367-X |
0.382 |
|
2001 |
Shkarayev S, Madenci E, Ibnabdeljalil M, Savruk M. Analytical stress singularities for a crack at a Bi- or triple junction of dissimilar materials with bilinear behavior Engineering Fracture Mechanics. 68: 475-486. DOI: 10.1016/S0013-7944(00)00114-4 |
0.389 |
|
2001 |
Guven I, Barut A, Madenci E. Sensitivity derivatives of dissimilar material junctions in electronic packages Proceedings - Electronic Components and Technology Conference. 911-918. |
0.64 |
|
2000 |
Sburlati R, Madenci E, Guven I. Local buckling of a circular interface delamination between a layer and a substrate with finite thickness Journal of Applied Mechanics, Transactions Asme. 67: 590-596. DOI: 10.1115/1.1309547 |
0.68 |
|
2000 |
Anderson T, Guven I, Madenci E, Gustafsson G. The necessity of reexamining previous life prediction analyses of solder joints in electronic packages Ieee Transactions On Components and Packaging Technologies. 23: 516-520. DOI: 10.1109/6144.868851 |
0.636 |
|
2000 |
Anderson T, Madenci E. Experimental investigation of low-velocity impact characteristics of sandwich composites Composite Structures. 50: 239-247. DOI: 10.1016/S0263-8223(00)00098-2 |
0.334 |
|
2000 |
Barut A, Madenci E, Tessler A, Starnes JH. New stiffened shell element for geometrically nonlinear analysis of composite laminates Computers and Structures. 77: 11-40. DOI: 10.1016/S0045-7949(99)00201-1 |
0.376 |
|
2000 |
Sergeev B, Madenci E, Ambur DR. Influence of bolt spacing and degree of anisotropy in single-lap joints Computers and Structures. 76: 89-103. DOI: 10.1016/S0045-7949(99)00142-X |
0.398 |
|
2000 |
Barut A, Madenci E, Tessler A. Nonlinear thermoelastic analysis of composite panels under non-uniform temperature distribution International Journal of Solids and Structures. 37: 3681-3713. DOI: 10.1016/S0020-7683(99)00119-5 |
0.397 |
|
2000 |
Anderson T, Madenci E. Graphite/epoxy foam sandwich panels under quasi-static indentation Engineering Fracture Mechanics. 67: 329-344. DOI: 10.1016/S0013-7944(00)00066-7 |
0.34 |
|
2000 |
Anderson T, Barut A, Guven I, Madenci E. Revisit of life-prediction model for solder joints Proceedings - Electronic Components and Technology Conference. 1064-1069. |
0.63 |
|
2000 |
Gustafsson G, Guven I, Kradinov V, Madenci E. Finite element modeling of BGA packages for life prediction Proceedings - Electronic Components and Technology Conference. 1059-1063. |
0.617 |
|
1999 |
Anderson T, Guven I, Madenci E, Gustafsson G. Necessity of reexamining previous life prediction analyses of solder joints in electronic packages Proceedings - Electronic Components and Technology Conference. 1010-1014. DOI: 10.1109/6144.868851 |
0.667 |
|
1999 |
Sergeev B, Madenci E, Ambur DR. Stress intensity factors for an arbitrarily oriented crack near a hole in longeron web Theoretical and Applied Fracture Mechanics. 31: 213-222. DOI: 10.1016/S0167-8442(99)00015-4 |
0.405 |
|
1999 |
Savruk MP, Shkarayev S, Madenci E. Stress near apex of dissimilar material with bilinear behavior Theoretical and Applied Fracture Mechanics. 31: 203-212. DOI: 10.1016/S0167-8442(99)00014-2 |
0.385 |
|
1999 |
Razi H, Sergeev B, Shkarayev S, Madenci E. Analysis of sandwich panels with multiple-site damage Engineering Fracture Mechanics. 64: 255-268. DOI: 10.1016/S0013-7944(99)00059-4 |
0.338 |
|
1998 |
Madenci E, Sergeev B, Shkarayev S. Boundary collocation method for multiple defect interactions in an anisotropic finite region International Journal of Fracture. 94: 339-355. DOI: 10.1023/A:1007555101061 |
0.441 |
|
1998 |
Balkan H, Madenci E. Thermal loading of a thin layer with circular debonding over a substrate International Journal of Fracture. 91: 217-231. DOI: 10.1023/A:1007441514577 |
0.356 |
|
1998 |
Madenci E, Shkarayev S, Sergeev B. Thermo-mechanical stresses for a triple junction of dissimilar materials: Global-local finite element analysis Theoretical and Applied Fracture Mechanics. 30: 103-117. DOI: 10.1016/S0167-8442(98)00047-0 |
0.381 |
|
1998 |
Persson E, Madenci E, Eriksson I. Delamination initiation of laminates with pin-loaded holes Theoretical and Applied Fracture Mechanics. 30: 87-101. DOI: 10.1016/S0167-8442(98)00046-9 |
0.422 |
|
1998 |
Anderson T, Madenci E, Burton WS, Fish JC. Analytical solution of finite-geometry composite panels under transient surface loading International Journal of Solids and Structures. 35: 1219-1239. DOI: 10.1016/S0020-7683(97)82761-8 |
0.432 |
|
1998 |
Madenci E, Shkarayev S, Sergeev B, Oplinger D, Shyprykevich P. Analysis of composite laminates with multiple fasteners International Journal of Solids and Structures. 35: 1793-1811. DOI: 10.1016/S0020-7683(97)00152-2 |
0.413 |
|
1998 |
Persson E, Madenci E. Composite laminates with elliptical pin-loaded holes Engineering Fracture Mechanics. 61: 279-295. DOI: 10.1016/S0013-7944(98)00041-1 |
0.373 |
|
1998 |
Guven I, Madenci E, Chan CL. Transient heat conduction analysis of electronic packages by coupled boundary and finite element methods Proceedings - Electronic Components and Technology Conference. 51-61. |
0.62 |
|
1997 |
Madenci E, Shkarayev S, Mahajan R. Potential failure sites in a flip-chip package with and without underfill American Society of Mechanical Engineers, Applied Mechanics Division, Amd. 222: 61-64. DOI: 10.1115/1.2792643 |
0.379 |
|
1997 |
Barut A, Madenci E, Tessler A. Nonlinear analysis of laminates through a mindlin-type shear deformable shallow shell element Computer Methods in Applied Mechanics and Engineering. 143: 155-173. DOI: 10.1016/S0045-7825(96)01140-1 |
0.395 |
|
1997 |
Barut A, Madenci E, Britt V, Starnes J. Buckling of a thin, tension-loaded, composite plate with an inclined crack Engineering Fracture Mechanics. 58: 233-248. DOI: 10.1016/S0013-7944(97)00064-7 |
0.403 |
|
1997 |
Guven I, Chan CL, Madenci E. Transient thermal analysis of electronic packages by the boundary element method Proceedings - Electronic Components and Technology Conference. 279-288. |
0.649 |
|
1996 |
Barut A, Madenci E, Tessler A. Nonlinear elastic deformations of moderately thick laminated shells subjected to large and rapid rigid-body motion Finite Elements in Analysis and Design. 22: 41-57. DOI: 10.1016/0168-874X(95)00063-Y |
0.35 |
|
1996 |
Madenci E, Barut A. Dynamic response of thin composite shells experiencing non-linear elastic deformations coupled with large and rapid overall motions International Journal For Numerical Methods in Engineering. 39: 2695-2723. DOI: 10.1002/(Sici)1097-0207(19960830)39:16<2695::Aid-Nme955>3.0.Co;2-1 |
0.362 |
|
1995 |
Mahajan R, Madenci E, Ileri L, Thurston M. Stress Concentrations in Electronic Packaging Mrs Proceedings. 390. DOI: 10.1557/Proc-390-39 |
0.405 |
|
1995 |
Madenci E, Balkan H, Quan M. Biaxial compression of a thin layer with circular debonding over a substrate International Journal of Solids and Structures. 32: 3465-3477. DOI: 10.1016/0020-7683(95)00001-Q |
0.312 |
|
1995 |
Madenci E, Ileri L, Starnes JH. Analysis of pin-loaded holes in composite laminates under combined bearing-bypass and shear loading International Journal of Solids and Structures. 32: 2053-2062. DOI: 10.1016/0020-7683(94)00218-L |
0.385 |
|
1995 |
Ileri L, Madenci E. Crack initiation and growth in electronic packages Proceedings - Electronic Components and Technology Conference. 970-976. |
0.324 |
|
1994 |
Madenci E, Barut A. A free‐formulation‐based flat shell element for non‐linear analysis of thin composite structures International Journal For Numerical Methods in Engineering. 37: 3825-3842. DOI: 10.1002/Nme.1620372206 |
0.395 |
|
1994 |
Madenci E, Barut A. Thermal postbuckling analysis of cylindrically curved composite laminates with a hole International Journal For Numerical Methods in Engineering. 37: 2073-2091. DOI: 10.1002/Nme.1620371205 |
0.397 |
|
1994 |
Madenci E, Barut A. Pre- and postbuckling response of curved, thin, composite panels with cutouts under compression International Journal For Numerical Methods in Engineering. 37: 1499-1510. DOI: 10.1002/Nme.1620370906 |
0.413 |
|
1993 |
Madenci E, Westmann RA. Local delamination growth in layered systems under compressive load Journal of Applied Mechanics, Transactions Asme. 60: 895-902. DOI: 10.1115/1.2900999 |
0.369 |
|
1993 |
Madenci E, Ileri L. Analytical determination of contact stresses in mechanically fastened composite laminates with finite boundaries International Journal of Solids and Structures. 30: 2469-2484. DOI: 10.1016/0020-7683(93)90161-Y |
0.416 |
|
1993 |
Madenci E, Ileri L, Kudva JN. Analysis of finite composite laminates with holes International Journal of Solids and Structures. 30: 825-834. DOI: 10.1016/0020-7683(93)90042-6 |
0.39 |
|
1993 |
Madenci E, Ileri L. Modified mapping-collocation method revisited Engineering Fracture Mechanics. 44: 127-136. DOI: 10.1016/0013-7944(93)90086-8 |
0.397 |
|
1993 |
Madenci E, Ileri L. Arbitrarily oriented, rigid, elliptic inclusion in a finite anisotropic medium International Journal of Fracture. 62: 341-354. DOI: 10.1007/Bf00017240 |
0.364 |
|
1992 |
Madenci E, Klemm W. Compression-induced failure of a glassy material with a crack-like defect Engineering Fracture Mechanics. 41: 443-452. DOI: 10.1016/0013-7944(92)90084-R |
0.414 |
|
1991 |
Madenci E. Slightly open, penny-shaped crack in an infinite solid under biaxial compression Theoretical and Applied Fracture Mechanics. 16: 215-222. DOI: 10.1016/0167-8442(91)90045-L |
0.385 |
|
1991 |
Madenci E. Delamination growth and buckling in an orthotropic strip International Journal of Solids and Structures. 27: 1773-1788. DOI: 10.1016/0020-7683(91)90012-5 |
0.373 |
|
1983 |
Sih GC, Madenci E. Discussion: “A Further Examination on the Application of the Strain Energy Density Theory to the Angled Crack Problem” (Chang, K. J., 1982, ASME J. Appl. Mech., 49, pp. 377–385) Journal of Applied Mechanics. 50: 234-236. DOI: 10.1115/1.3167007 |
0.317 |
|
1983 |
Sih GC, Madenci E. Fracture initiation under gross yielding: Strain energy density criterion Engineering Fracture Mechanics. 18: 667-677. DOI: 10.1016/0013-7944(83)90058-9 |
0.394 |
|
1983 |
Sih GC, Madenci E. Crack growth resistance characterized by the strain energy density function Engineering Fracture Mechanics. 18: 1159-1171. DOI: 10.1016/0013-7944(83)90008-5 |
0.382 |
|
Show low-probability matches. |