| Year |
Citation |
Score |
| 2017 |
Grujicic M, Ramaswami S, Snipes J. Computational investigation of ballistic-impact behavior and penetration resistance of a nacre-like ceramic/polymer laminated composite International Journal of Structural Integrity. 8: 79-107. DOI: 10.1108/Ijsi-09-2015-0041 |
0.378 |
|
| 2017 |
Grujicic M, Snipes J, Ramaswami S. Ballistic-penetration resistance and flexural-stiffness optimization of a nacre-mimetic, B4C-reinforced, polyurea-matrix composite armor International Journal of Structural Integrity. 8: 341-372. DOI: 10.1108/Ijsi-07-2016-0026 |
0.395 |
|
| 2017 |
Grujicic M, Ramaswami S, Snipes J. The shockwave dispersion/attenuation potential of a protective structure made of a chemically reactive mixture International Journal of Structural Integrity. 8: 188-209. DOI: 10.1108/Ijsi-05-2016-0018 |
0.319 |
|
| 2017 |
Grujicic M, Snipes J, Ramaswami S. Single-yarn pull-out test in neat, solvent-treated and shear-thickening fluid-impregnated Kevlar® KM2 fabric: A finite-element analysis International Journal of Structural Integrity. 8: 154-178. DOI: 10.1108/Ijsi-03-2016-0009 |
0.361 |
|
| 2016 |
Grujicic M, Yavari R, Snipes JS, Ramaswami S. Design optimization of a mine-blast-venting solution for protection of light-tacticalvehicle subjected to shallow-buried underbody mine detonation Multidiscipline Modeling in Materials and Structures. 12: 2-32. DOI: 10.1108/Mmms-11-2014-0058 |
0.311 |
|
| 2016 |
Grujicic M, Snipes J, Ramaswami S. A computational analysis of the utility of chemical reactions within protective structures in mitigating shockwave-impact effects Multidiscipline Modeling in Materials and Structures. 12: 438-472. DOI: 10.1108/Mmms-04-2015-0019 |
0.332 |
|
| 2016 |
Grujicic M, Ramaswami S, Snipes JS, Yavari R, Dudt P. Experimental and computational investigations of the potential improvement in helmet blast-protection through the use of a polyurea-based external coating Multidiscipline Modeling in Materials and Structures. 12: 33-72. DOI: 10.1108/Mmms-02-2015-0009 |
0.348 |
|
| 2016 |
Grujicic M, Yavari R, Snipes J, Ramaswami S. A combined finite-element/discrete-particle analysis of a side-vent-channel-based concept for improved blast-survivability of light tactical vehicles International Journal of Structural Integrity. 7: 106-141. DOI: 10.1108/Ijsi-12-2014-0068 |
0.304 |
|
| 2016 |
Grujicic M, Ramaswami S, Snipes J, Yavari R, Dudt P. Improvement in head blast-protection via the use of polyurea-augmented advanced combat helmet International Journal of Structural Integrity. 7: 516-552. DOI: 10.1108/Ijsi-08-2015-0027 |
0.302 |
|
| 2016 |
Grujicic M, Snipes J, Ramaswami S, Yen CF. Experimental characterization and numerical analysis of the weld-region material in friction stir welded thick AA2139-T8 plates International Journal of Structural Integrity. 7: 429-454. DOI: 10.1108/Ijsi-06-2015-0017 |
0.404 |
|
| 2016 |
Grujicic M, Snipes J, Ramaswami S, Avuthu V, Yen CF, Cheeseman B. Unit-cell-based derivation of the material models for armor-grade composites with different architectures of ultra-high molecular-weight polyethylene fibers International Journal of Structural Integrity. 7: 458-489. DOI: 10.1108/Ijsi-06-2015-0015 |
0.406 |
|
| 2016 |
Grujicic M, Snipes J, Ramaswami S. Process and product-performance modeling for mechanical fastening by flow drilling screws International Journal of Structural Integrity. 7: 370-396. DOI: 10.1108/Ijsi-03-2015-0011 |
0.416 |
|
| 2016 |
Grujicic M, Ramaswami S, Snipes J, Avuthu V, Yen CF, Cheeseman B. Application of the materials-by-design approach to armor-grade polymer-matrix composites for enhancement of ballistic-penetration resistance International Journal of Structural Integrity. 7: 142-174. DOI: 10.1108/Ijsi-02-2015-0005 |
0.38 |
|
| 2016 |
Grujicic M, Snipes J, Ramaswami S, Avuthu V, Yen CF, Cheeseman B. Derivation of the material models for ultra-high molecular-weight polyethylene fiber-reinforced armor-grade composites with different architectures Engineering Computations (Swansea, Wales). 33: 926-956. DOI: 10.1108/Ec-05-2015-0120 |
0.405 |
|
| 2016 |
Grujicic M, Snipes JS, Ramaswami S. Retraction Note to: Multi-Length Scale Analysis of the Effect of Fused-Silica Pre-shocking on its Tendency for Devitrification Journal of Materials Engineering and Performance. 25: 1979-1979. DOI: 10.1007/S11665-017-2584-Z |
0.381 |
|
| 2016 |
Grujicic M, Snipes JS, Ramaswami S, Yen CF. A Combined Experimental/Computational Analysis of the Butt-Friction-Stir-Welded AA2139-T8 Joints Journal of Materials Engineering and Performance. 25: 2690-2701. DOI: 10.1007/S11665-016-2133-1 |
0.399 |
|
| 2016 |
Grujicic M, Galgalikar R, Snipes JS, Ramaswami S. Material Constitutive Models for Creep and Rupture of SiC/SiC Ceramic-Matrix Composites (CMCs) Under Multiaxial Loading Journal of Materials Engineering and Performance. 25: 1697-1708. DOI: 10.1007/S11665-016-2036-1 |
0.426 |
|
| 2016 |
Grujicic M, Snipes JS, Ramaswami S. Multi-Length Scale Analysis of the Effect of Fused-Silica Pre-shocking on its Tendency for Devitrification Journal of Materials Engineering and Performance. 1-15. DOI: 10.1007/S11665-016-1940-8 |
0.382 |
|
| 2016 |
Grujicic M, Snipes JS, Ramaswami S. Ballistic Impact Behavior of Nacre-Like Laminated Composites Consisting of B4C Tablets and Polyurea Matrix Journal of Materials Engineering and Performance. 1-18. DOI: 10.1007/S11665-016-1926-6 |
0.358 |
|
| 2016 |
Grujicic M, Galgalikar R, Snipes JS, Ramaswami S. Multi-length-scale Material Model for SiC/SiC Ceramic-Matrix Composites (CMCs): Inclusion of In-Service Environmental Effects Journal of Materials Engineering and Performance. 25: 199-219. DOI: 10.1007/S11665-015-1850-1 |
0.406 |
|
| 2016 |
Grujicic M, Snipes JS, Ramaswami S. Application of the Materials-by-Design Methodology to Redesign a New Grade of the High-Strength Low-Alloy Class of Steels with Improved Mechanical Properties and Processability Journal of Materials Engineering and Performance. 25: 165-178. DOI: 10.1007/S11665-015-1812-7 |
0.413 |
|
| 2016 |
Grujicic M, Snipes JS, Ramaswami S. The effect of fused-silica pre-shocking on its devitrification propensity and ballistic resistance: an all-atom molecular-level analysis Journal of Materials Science. 51: 3500-3512. DOI: 10.1007/S10853-015-9670-0 |
0.372 |
|
| 2015 |
Grujicic M, Ramaswami S, Snipes JS. A Finite-Element-Based Process Model for Linear Friction Welding of Steels Journal of Mechatronics. 3: 98-107. DOI: 10.1166/Jom.2015.1101 |
0.337 |
|
| 2015 |
Grujicic M, Snipes J, Ramaswami S, Yavari R, Cheeseman B. Densification and devitrification of fused silica induced by ballistic impact: A computational investigation Journal of Nanomaterials. 2015. DOI: 10.1155/2015/650625 |
0.36 |
|
| 2015 |
Grujicic M, Yavari R, Ramaswami S, Snipes J, Galgalikar R. Computational analysis of inter-material mixing and weld-flaw formation during dissimilar-filler-metal friction stir welding (FSW) Multidiscipline Modeling in Materials and Structures. 11: 322-349. DOI: 10.1108/Mmms-12-2014-0062 |
0.424 |
|
| 2015 |
Grujicic M, Snipes J, Yavari R, Ramaswami S, Galgalikar R. Computational investigation of foreign object damage sustained by environmental barrier coatings (EBCs) and SiC/SiC ceramic-matrix composites (CMCs) Multidiscipline Modeling in Materials and Structures. 11: 238-272. DOI: 10.1108/Mmms-07-2014-0039 |
0.306 |
|
| 2015 |
Grujicic M, Galgalikar R, Ramaswami S, Snipes J, Yavari R, Bordia RK. Multi-physics modeling and simulations of reactive melt infiltration process used in fabrication of ceramic-matrix composites (CMCs) Multidiscipline Modeling in Materials and Structures. 11: 73-74. DOI: 10.1108/Mmms-06-2014-0035 |
0.353 |
|
| 2015 |
Grujicic M, Yavari R, Snipes J, Ramaswami S. Mitigation of blast and impact loading via the use of a zeolite-absorbent/nano-fluidics protection system International Journal of Structural Integrity. 6: 367-389. DOI: 10.1108/Ijsi-09-2014-0041 |
0.325 |
|
| 2015 |
Grujicic M, Avuthu V, Snipes JS, Ramaswami S, Galgalikar R. The Effect of High-Pressure Devitrification and Densification on Ballistic-Penetration Resistance of Fused Silica Journal of Materials Engineering and Performance. 24: 4890-4907. DOI: 10.1007/S11665-015-1775-8 |
0.387 |
|
| 2015 |
Grujicic M, Ramaswami S, Snipes JS, Avuthu V, Galgalikar R, Zhang Z. Prediction of the Grain-Microstructure Evolution Within a Friction Stir Welding (FSW) Joint via the Use of the Monte Carlo Simulation Method Journal of Materials Engineering and Performance. 24: 3471-3486. DOI: 10.1007/S11665-015-1635-6 |
0.371 |
|
| 2015 |
Grujicic M, Snipes JS, Ramaswami S, Yavari R, Barsoum RS. All-Atom Molecular-Level Analysis of the Ballistic-Impact-Induced Densification and Devitrification of Fused Silica Journal of Materials Engineering and Performance. 24: 2970-2983. DOI: 10.1007/S11665-015-1590-2 |
0.36 |
|
| 2015 |
Zhang Z, Wu Q, Grujicic M, Wan ZY. Monte Carlo simulation of grain growth and welding zones in friction stir welding of AA6082-T6 Journal of Materials Science. DOI: 10.1007/S10853-015-9495-X |
0.365 |
|
| 2014 |
Grujicic M, Yavari R, Snipes J, Ramaswami S, Barsoum R. All-atom molecular-level computational simulations of planar longitudinal shockwave interactions with polyurea, soda-lime glass and polyurea/glass interfaces Multidiscipline Modeling in Materials and Structures. 10: 474-510. DOI: 10.1108/Mmms-11-2013-0070 |
0.386 |
|
| 2014 |
Grujicic M, Snipes JS, Galgalikar R, Ramaswami S, Yavari R, Yen CF, Cheeseman BA, Montgomery JS. Improved gas metal arc welding multi-physics process model and its application to MIL A46100 armor-grade steel butt-welds Multidiscipline Modeling in Materials and Structures. 10: 176-210. DOI: 10.1108/Mmms-05-2013-0038 |
0.343 |
|
| 2014 |
Grujicic M, Snipes J, Ramaswami S, Abu-Farha F. Process modeling, joint-property characterization and construction of joint connectors for mechanical fastening by self-piercing riveting Multidiscipline Modeling in Materials and Structures. 10: 631-658. DOI: 10.1108/Mmms-04-2014-0024 |
0.4 |
|
| 2014 |
Grujicic M, Snipes JS, Ramaswami S, Yavari R, Yen CF, Cheeseman BA. Analysis of steel-with-composite material substitution in military vehicle hull floors subjected to shallow-buried landmine-detonation loads Multidiscipline Modeling in Materials and Structures. 10: 416-448. DOI: 10.1108/Mmms-01-2014-0001 |
0.41 |
|
| 2014 |
Grujicic M, Yavari R, Snipes JS, Ramaswami S, Barsoum RS. All-atom molecular-level computational analyses of polyurea/fused-silica interfacial decohesion caused by impinging tensile stress-waves International Journal of Structural Integrity. 5: 339-367. DOI: 10.1108/Ijsi-01-2014-0001 |
0.329 |
|
| 2014 |
Grujicic M, Ramaswami S, Snipes J, Galgalikar R, Yavari R, Yen CF, Cheeseman B, Montgomery J. Modeling of ballistic-failure mechanisms in gas metal arc welds of mil a46100 armor-grade steel Engineering Computations (Swansea, Wales). 32: 705-741. DOI: 10.1108/Ec-01-2014-0010 |
0.331 |
|
| 2014 |
Grujicic M, Yavari R, Snipes JS, Ramaswami S, Jiao T, Clifton RJ. Experimental and Computational Study of the Shearing Resistance of Polyurea at High Pressures and High Strain Rates Journal of Materials Engineering and Performance. 24: 778-798. DOI: 10.1007/S11665-014-1316-X |
0.373 |
|
| 2014 |
Grujicic M, Ramaswami S, Snipes JS, Yavari R, Yen CF, Cheeseman BA. Optimization of Gas Metal Arc Welding (GMAW) Process for Maximum Ballistic Limit in MIL A46100 Steel Welded All-Metal Armor Journal of Materials Engineering and Performance. 24: 229-244. DOI: 10.1007/S11665-014-1274-3 |
0.353 |
|
| 2014 |
Grujicic M, Chenna V, Galgalikar R, Snipes JS, Ramaswami S, Yavari R. Wind-Turbine Gear-Box Roller-Bearing Premature-Failure Caused by Grain-Boundary Hydrogen Embrittlement: A Multi-physics Computational Investigation Journal of Materials Engineering and Performance. 23: 3984-4001. DOI: 10.1007/S11665-014-1188-0 |
0.337 |
|
| 2014 |
Grujicic M, Snipes JS, Galgalikar R, Ramaswami S, Yavari R, Yen CF, Cheeseman BA. Ballistic-failure mechanisms in gas metal arc welds of mil A46100 armor-grade steel: A computational investigation Journal of Materials Engineering and Performance. 23: 3108-3125. DOI: 10.1007/S11665-014-1090-9 |
0.354 |
|
| 2014 |
Grujicic M, Yavari R, Snipes JS, Ramaswami S, Yen CF, Cheeseman BA. Linear friction welding process model for carpenter custom 465 precipitation-hardened martensitic stainless steel Journal of Materials Engineering and Performance. 23: 2182-2198. DOI: 10.1007/S11665-014-0985-9 |
0.419 |
|
| 2014 |
Grujicic M, Snipes JS, Galgalikar R, Ramaswami S. Material-model-based determination of the shock-hugoniot relations in nanosegregated polyurea Journal of Materials Engineering and Performance. 23: 357-371. DOI: 10.1007/S11665-013-0769-7 |
0.438 |
|
| 2014 |
Grujicic M, Snipes JS, Ramaswami S, Yavari R, Ramasubramanian MK. Meso-scale computational investigation of shock-wave attenuation by trailing release wave in different grades of polyurea Journal of Materials Engineering and Performance. 23: 49-64. DOI: 10.1007/S11665-013-0760-3 |
0.311 |
|
| 2014 |
Grujicic M, Cheeseman BA. Concurrent computational and dimensional analyses of design of vehicle floor-plates for landmine-blast survivability Journal of Materials Engineering and Performance. 23: 1-12. DOI: 10.1007/S11665-013-0637-5 |
0.327 |
|
| 2014 |
Grujicic M, Yavari R, Snipes JS, Ramaswami S. A zeolite absorbent/nano-fluidics protection-based blast- and ballistic-impact-mitigation system Journal of Materials Science. 50: 2019-2037. DOI: 10.1007/S10853-014-8779-X |
0.313 |
|
| 2014 |
Grujicic M, Yavari R, Snipes JS, Ramaswami S, Yen CF, Cheeseman BA. The effect of plain-weaving on the mechanical properties of warp and weft p-phenylene terephthalamide (PPTA) fibers/yarns Journal of Materials Science. 49: 8272-8293. DOI: 10.1007/S10853-014-8536-1 |
0.411 |
|
| 2013 |
Grujicic M, Ramaswami S, Snipes JS, Yavari R, Yen CF, Cheeseman BA. Axial-compressive behavior, including kink-band formation and propagation, of single p-phenylene terephthalamide (PPTA) fibers Advances in Materials Science and Engineering. 2013. DOI: 10.1155/2013/329549 |
0.314 |
|
| 2013 |
Grujicic M, Ramaswami S, Snipes J, Yavari R, Lickfield G, Yen CF, Cheeseman B. Molecular-level computational investigation of mechanical transverse behavior of p-phenylene terephthalamide (PPTA) fibers Multidiscipline Modeling in Materials and Structures. 9: 462-498. DOI: 10.1108/Mmms-11-2012-0018 |
0.324 |
|
| 2013 |
Grujicic M, Snipes J, Ramaswami S, Galgalikar R, Runt J, Tarter J. Molecular- and domain-level microstructure-dependent material model for nano-segregated polyurea Multidiscipline Modeling in Materials and Structures. 9: 548-578. DOI: 10.1108/Mmms-10-2012-0014 |
0.404 |
|
| 2013 |
Grujicic M, Snipes JS, Chandrasekharan N, Ramaswami S. Computational assessment of the blast-mitigation efficacy of an air-vacated protective-buffer concept Multidiscipline Modeling in Materials and Structures. 9: 214-242. DOI: 10.1108/Mmms-04-2013-0029 |
0.336 |
|
| 2013 |
Grujicic M, Glomski P, Cheeseman B. Dimensional analysis of impulse loading resulting from detonation of shallow-buried charges Multidiscipline Modeling in Materials and Structures. 9: 367-390. DOI: 10.1108/Mmms-01-2013-0002 |
0.327 |
|
| 2013 |
Grujicic M, Galgalikar R, Snipes JS, Yavari R, Ramaswami S. Multi-physics modeling of the fabrication and dynamic performance of all-metal auxetic-hexagonal sandwich-structures Materials and Design. 51: 113-130. DOI: 10.1016/J.Matdes.2013.04.004 |
0.386 |
|
| 2013 |
Grujicic M, Yavari R, Ramaswami S, Snipes JS, Yen CF, Cheeseman BA. Molecular-level study of the effect of prior axial compression/torsion on the axial-tensile strength of PPTA fibers Journal of Materials Engineering and Performance. 22: 3269-3287. DOI: 10.1007/S11665-013-0648-2 |
0.345 |
|
| 2013 |
Grujicic M, Ramaswami S, Snipes JS, Yen CF, Cheeseman BA, Montgomery JS. Multiphysics modeling and simulations of Mil A46100 armor-grade martensitic steel gas metal arc welding process Journal of Materials Engineering and Performance. 22: 2950-2969. DOI: 10.1007/S11665-013-0583-2 |
0.366 |
|
| 2013 |
Grujicic M, Snipes JS, Ramaswami S, Yavari R, Runt J, Tarter J, Dillon G. Coarse-grained molecular-level analysis of polyurea properties and shock-mitigation potential Journal of Materials Engineering and Performance. 22: 1964-1981. DOI: 10.1007/S11665-013-0485-3 |
0.369 |
|
| 2013 |
Grujicic M, Arakere A, Ramaswami S, Snipes JS, Yavari R, Yen CF, Cheeseman BA, Montgomery JS. Gas metal arc welding process modeling and prediction of weld microstructure in MIL A46100 armor-grade martensitic steel Journal of Materials Engineering and Performance. 22: 1541-1557. DOI: 10.1007/S11665-012-0445-3 |
0.377 |
|
| 2013 |
Grujicic M, Yavari R, Snipes JS, Ramaswami S. Extension of a current continuum-level material model for soil into the low-density discrete-particle regime Journal of Materials Engineering and Performance. 22: 1268-1283. DOI: 10.1007/S11665-012-0429-3 |
0.307 |
|
| 2013 |
Grujicic M, Ramaswami S, Snipes JS, Yavari R, Arakere A, Yen CF, Cheeseman BA. Computational modeling of microstructural-evolution in AISI 1005 steel during gas metal arc butt welding Journal of Materials Engineering and Performance. 22: 1209-1222. DOI: 10.1007/S11665-012-0402-1 |
0.379 |
|
| 2013 |
Grujicic M, Pandurangan B, Snipes JS, Yen CF, Cheeseman BA. Multi-length scale-enriched continuum-level material model for Kevlar ®-fiber-reinforced polymer-matrix composites Journal of Materials Engineering and Performance. 22: 681-695. DOI: 10.1007/S11665-012-0329-6 |
0.704 |
|
| 2013 |
Grujicic M, Pandurangan B, Arakere A, Yen CF, Cheeseman BA. Friction stir weld failure mechanisms in aluminum-armor structures under ballistic impact loading conditions Journal of Materials Engineering and Performance. 22: 30-40. DOI: 10.1007/S11665-012-0239-7 |
0.685 |
|
| 2012 |
Grujicic M, Snipes JS, Chandrasekharan N. Fluid-structure interaction computational analysis of a piston-cylinder based blast-wave-mitigation concept Multidiscipline Modeling in Materials and Structures. 8: 524-553. DOI: 10.1108/15736101211281632 |
0.332 |
|
| 2012 |
Grujicic M, Arakere A, Pandurangan B, Grujicic A, Littlestone A, Barsoum R. Computational investigation of shock-mitigation efficacy of polyurea when used in a combat helmet: A core sample analysis Multidiscipline Modeling in Materials and Structures. 8: 297-331. DOI: 10.1108/15736101211269122 |
0.676 |
|
| 2012 |
Grujicic M, D'Entremont B, Pandurangan B, Grujicic A, La Berge M, Runt J, Tarter J, Dillon G. A study of the blast-induced brain white-matter damage and the associated diffuse axonal injury Multidiscipline Modeling in Materials and Structures. 8: 213-245. DOI: 10.1108/15736101211251220 |
0.63 |
|
| 2012 |
Grujicic M, Pandurangan B, d'Entremont B. The role of adhesive in the ballistic/structural performance of ceramic/polymer-matrix composite hybrid armor Materials and Design. 41: 380-393. DOI: 10.1016/J.Matdes.2012.05.023 |
0.678 |
|
| 2012 |
Grujicic M, Bell WC, Pandurangan B, Cheeseman BA, Patel P, Gazonas GA. Inclusion of material non-linearity and inelasticity into a continuum-level material model for soda-lime glass Materials and Design. 35: 144-155. DOI: 10.1016/J.Matdes.2011.08.031 |
0.698 |
|
| 2012 |
Grujicic M, Bell WC, Pandurangan B. Design and material selection guidelines and strategies for transparent armor systems Materials and Design. 34: 808-819. DOI: 10.1016/J.Matdes.2011.07.007 |
0.65 |
|
| 2012 |
Grujicic M, Pandurangan B, Arakere A, Snipes JS. Fatigue-life computational analysis for the self-expanding endovascular Nitinol stents Journal of Materials Engineering and Performance. 21: 2218-2230. DOI: 10.1007/S11665-012-0150-2 |
0.642 |
|
| 2012 |
Grujicic M, Arakere G, Hariharan A, Pandurangan B. A concurrent product-development approach for friction-stir welded vehicle-underbody structures Journal of Materials Engineering and Performance. 21: 437-449. DOI: 10.1007/S11665-011-9955-7 |
0.769 |
|
| 2012 |
Grujicic M, Pandurangan B, Bell WC, Bagheri S. Shock-wave attenuation and energy-dissipation potential of granular materials Journal of Materials Engineering and Performance. 21: 167-179. DOI: 10.1007/S11665-011-9954-8 |
0.678 |
|
| 2012 |
Grujicic M, Arakere G, Hariharan A, Pandurangan B. Two-level weld-material homogenization for efficient computational analysis of welded structure blast-survivability Journal of Materials Engineering and Performance. 21: 786-796. DOI: 10.1007/S11665-011-9876-5 |
0.791 |
|
| 2012 |
Grujicic M, He T, Pandurangan B, Svingala FR, Settles GS, Hargather MJ. Experimental characterization and material-model development for microphase-segregated polyurea: An overview Journal of Materials Engineering and Performance. 21: 2-16. DOI: 10.1007/S11665-011-9875-6 |
0.715 |
|
| 2012 |
Grujicic M, Pandurangan B, Yen CF, Cheeseman BA. Modifications in the AA5083 Johnson-Cook material model for use in friction stir welding computational analyses Journal of Materials Engineering and Performance. 21: 2207-2217. DOI: 10.1007/S11665-011-0118-7 |
0.703 |
|
| 2012 |
Grujicic M, D'Entremont BP, Pandurangan B, Runt J, Tarter J, Dillon G. Concept-level analysis and design of polyurea for enhanced blast-mitigation performance Journal of Materials Engineering and Performance. 21: 2024-2037. DOI: 10.1007/S11665-011-0117-8 |
0.704 |
|
| 2012 |
Grujicic M, Arakere G, Pandurangan B, Yen CF, Cheeseman BA. Process modeling of Ti-6Al-4V linear friction welding (LFW) Journal of Materials Engineering and Performance. 21: 2011-2023. DOI: 10.1007/S11665-011-0097-8 |
0.785 |
|
| 2012 |
Grujicic M, Arakere G, Pandurangan B, Ochterbeck JM, Yen CF, Cheeseman BA, Reynolds AP, Sutton MA. Computational analysis of material flow during friction stir welding of AA5059 aluminum alloys Journal of Materials Engineering and Performance. 21: 1824-1840. DOI: 10.1007/S11665-011-0069-Z |
0.795 |
|
| 2012 |
Grujicic M, Pandurangan B, Cheeseman BA, Yen CF. Spall-fracture physics and spallation-resistance-based material selection Journal of Materials Engineering and Performance. 21: 1813-1823. DOI: 10.1007/S11665-011-0068-0 |
0.677 |
|
| 2012 |
Grujicic A, Laberge M, Grujicic M, Pandurangan B, Runt J, Tarter J, Dillon G. Potential improvements in shock-mitigation efficacy of a polyurea-augmented advanced combat helmet Journal of Materials Engineering and Performance. 21: 1562-1579. DOI: 10.1007/S11665-011-0065-3 |
0.672 |
|
| 2012 |
Grujicic M, Bell WC, Pandurangan B, Cheeseman BA, Fountzoulas C, Patel P. Molecular-level simulations of shock generation and propagation in soda-lime glass Journal of Materials Engineering and Performance. 21: 1580-1590. DOI: 10.1007/S11665-011-0064-4 |
0.7 |
|
| 2012 |
Grujicic M, Hariharan A, Pandurangan B, Yen CF, Cheeseman BA, Wang Y, Miao Y, Zheng JQ. Fiber-level modeling of dynamic strength of kevlar® KM2 ballistic fabric Journal of Materials Engineering and Performance. 21: 1107-1119. DOI: 10.1007/S11665-011-0006-1 |
0.653 |
|
| 2012 |
Grujicic M, Pandurangan B, Zhang Z, Bell WC, Gazonas GA, Patel P, Cheeseman BA. Molecular-level analysis of shock-wave physics and derivation of the hugoniot relations for fused silica Journal of Materials Engineering and Performance. 21: 823-836. DOI: 10.1007/S11665-011-0005-2 |
0.669 |
|
| 2012 |
Grujicic M, Pandurangan B, Coutris N. A computational investigation of the multi-hit ballistic-protection performance of laminated transparent-armor systems Journal of Materials Engineering and Performance. 21: 837-848. DOI: 10.1007/S11665-011-0004-3 |
0.674 |
|
| 2012 |
Grujicic M, Yavari R, Snipes JS, Ramaswami S, Runt J, Tarter J, Dillon G. Molecular-level computational investigation of shock-wave mitigation capability of polyurea Journal of Materials Science. 47: 8197-8215. DOI: 10.1007/S10853-012-6716-4 |
0.353 |
|
| 2012 |
Grujicic M, Pandurangan B. Mesoscale analysis of segmental dynamics in microphase-segregated polyurea Journal of Materials Science. 47: 3876-3889. DOI: 10.1007/S10853-011-6243-8 |
0.669 |
|
| 2011 |
Grujicic M, Bell WC, Pandurangan B, Yen CF, Cheeseman BA. Computational investigation of structured shocks in A1/SiC-particulate metal-matrix composites Multidiscipline Modeling in Materials and Structures. 7: 469-497. DOI: 10.1108/15736101111185315 |
0.689 |
|
| 2011 |
Grujicic M, Bell WC. A computational analysis of survivability of a pick-up truck subjected to mine detonation loads Multidiscipline Modeling in Materials and Structures. 7: 386-423. DOI: 10.1108/15736101111185289 |
0.366 |
|
| 2011 |
Grujicic M, He T, Pandurangan B. Development and parameterization of an equilibrium material model for segmented polyurea Multidiscipline Modeling in Materials and Structures. 7: 96-114. DOI: 10.1108/15736101111157064 |
0.706 |
|
| 2011 |
Grujicic A, Laberge M, Xie X, Arakere G, Pandurangan B, Grujicic M, Jeray KJ, Tanner SL. Computational investigation of the relative efficacies of nail- and plate-type proximal femoral-fracture fixation implants Multidiscipline Modeling in Materials and Structures. 7: 212-244. DOI: 10.1108/1536-540911178234 |
0.747 |
|
| 2011 |
Grujicic M, Pandurangan B, Bell WC, Yen CF, Cheeseman BA. Application of a dynamic-mixture shock-wave model to the metal-matrix composite materials Materials Science and Engineering A. 528: 8187-8197. DOI: 10.1016/J.Msea.2011.08.008 |
0.681 |
|
| 2011 |
Grujicic M, Pandurangan B, Bell WC, Cheeseman BA, Yen CF, Randow CL. Molecular-level simulations of shock generation and propagation in polyurea Materials Science and Engineering A. 528: 3799-3808. DOI: 10.1016/J.Msea.2011.01.081 |
0.697 |
|
| 2011 |
Grujicic M, Pandurangan B, Hariharan A. Comparative discrete-particle versus continuum-based computational investigation of soil response to impulse loading Journal of Materials Engineering and Performance. 20: 1520-1535. DOI: 10.1007/S11665-011-9844-0 |
0.623 |
|
| 2011 |
Grujicic M, Bell WC, Glomski PS, Pandurangan B, Yen CF, Cheeseman BA. Filament-level modeling of aramid-based high-performance structural materials Journal of Materials Engineering and Performance. 20: 1401-1413. DOI: 10.1007/S11665-010-9786-Y |
0.66 |
|
| 2011 |
Grujicic M, Bell WC, Glomski PS, Pandurangan B, Cheeseman BA, Fountzoulas C, Patel P. Multi-length scale modeling of high-pressure-induced phase transformations in soda-lime glass Journal of Materials Engineering and Performance. 20: 1144-1156. DOI: 10.1007/S11665-010-9774-2 |
0.649 |
|
| 2011 |
Grujicic M, Arakere G, Yen CF, Cheeseman BA. Computational investigation of hardness evolution during friction-stir welding of AA5083 and AA2139 aluminum alloys Journal of Materials Engineering and Performance. 20: 1097-1108. DOI: 10.1007/S11665-010-9741-Y |
0.674 |
|
| 2011 |
Grujicic M, Arakere G, Panduragan B, Hariharan A, Yen CF, Cheeseman BA, Fountzoulas C. Statistical analysis of high-cycle fatigue behavior of friction stir welded AA5083-H321 Journal of Materials Engineering and Performance. 20: 855-864. DOI: 10.1007/S11665-010-9725-Y |
0.671 |
|
| 2011 |
Grujicic M, Bell WC, Pandurangan B, Glomski PS. Fluid/Structure interaction computational investigation of blast-wave mitigation efficacy of the advanced combat helmet Journal of Materials Engineering and Performance. 20: 877-893. DOI: 10.1007/S11665-010-9724-Z |
0.663 |
|
| 2011 |
Grujicic M, Arakere G, Pandurangan B, Hariharan A, Yen CF, Cheeseman BA. Development of a robust and cost-effective friction stir welding process for use in advanced military vehicles Journal of Materials Engineering and Performance. 20: 11-23. DOI: 10.1007/S11665-010-9650-0 |
0.774 |
|
| 2011 |
Grujicic M, Pandurangan B, Bell WC, Cheeseman BA, Patel P, Gazonas GA. Molecular-level analysis of shock-wave physics and derivation of the Hugoniot relations for soda-lime glass Journal of Materials Science. 46: 7298-7312. DOI: 10.1007/S10853-011-5691-5 |
0.704 |
|
| 2011 |
Grujicic M, Glomski PS, Pandurangan B, Bell WC, Yen CF, Cheeseman BA. Multi-length scale computational derivation of Kevlar® yarn-level material model Journal of Materials Science. 46: 4787-4802. DOI: 10.1007/S10853-011-5389-8 |
0.684 |
|
| 2011 |
Grujicic M, Pandurangan B, King AE, Runt J, Tarter J, Dillon G. Multi-length scale modeling and analysis of microstructure evolution and mechanical properties in polyurea Journal of Materials Science. 46: 1767-1779. DOI: 10.1007/S10853-010-4998-Y |
0.682 |
|
| 2010 |
Wagner DW, Divringi K, Ozcan C, Grujicic M, Pandurangan B, Grujicic A. Combined musculoskeletal dynamics/structural finite element analysis of femur physiological loads during walking Multidiscipline Modeling in Materials and Structures. 6: 417-437. DOI: 10.1108/15736101011095118 |
0.665 |
|
| 2010 |
Grujicic M, Arakere G, He T. Material-modeling and structural-mechanics aspects of the traumatic brain injury problem Multidiscipline Modeling in Materials and Structures. 6: 335-363. DOI: 10.1108/15736101011080097 |
0.66 |
|
| 2010 |
Grujicic M, Marvi H, Arakere G, Haque I. A finite element analysis of pneumatic-tire/sand interactions during off-road vehicle travel Multidiscipline Modeling in Materials and Structures. 6: 284-308. DOI: 10.1108/15736101011068037 |
0.686 |
|
| 2010 |
Grujicic M, Marvi H, Arakere G, Bell WC, Haque I. The effect of up-armoring of the high-mobility multi-purpose wheeled vehicle (HMMWV) on the off-road vehicle performance Multidiscipline Modeling in Materials and Structures. 6: 229-256. DOI: 10.1108/15736101011068019 |
0.675 |
|
| 2010 |
Grujicic M, Sellappan V, Arakere G, Ochterbeck JM, Seyr N, Obieglo A, Erdmann M, Holzleitner J. Investigation of a polymer metal inter-locking technology for use in load-bearing automotive components Multidiscipline Modeling in Materials and Structures. 6: 23-44. DOI: 10.1108/15736101011055257 |
0.646 |
|
| 2010 |
Grujicic M, Pandurangan B, He T, Cheeseman BA, Yen CF, Randow CL. Computational investigation of impact energy absorption capability of polyurea coatings via deformation-induced glass transition Materials Science and Engineering A. 527: 7741-7751. DOI: 10.1016/J.Msea.2010.08.042 |
0.68 |
|
| 2010 |
Grujicic M, Bell WC, Pandurangan B, He T. Blast-wave impact-mitigation capability of polyurea when used as helmet suspension-pad material Materials and Design. 31: 4050-4065. DOI: 10.1016/J.Matdes.2010.05.002 |
0.673 |
|
| 2010 |
Grujicic M, Arakere G, Xie X, LaBerge M, Grujicic A, Wagner DW, Vallejo A. Design-optimization and material selection for a femoral-fracture fixation-plate implant Materials and Design. 31: 3463-3473. DOI: 10.1016/J.Matdes.2010.01.036 |
0.65 |
|
| 2010 |
Grujicic M, Pandurangan B, Xie X, Gramopadhye AK, Wagner D, Ozen M. Musculoskeletal computational analysis of the influence of car-seat design/adjustments on long-distance driving fatigue International Journal of Industrial Ergonomics. 40: 345-355. DOI: 10.1016/J.Ergon.2010.01.002 |
0.658 |
|
| 2010 |
Grujicic M, Arakere G, Pandurangan B, Sellappan V, Vallejo A, Ozen M. Multidisciplinary design optimization for glass-fiber epoxy-matrix composite 5 MW horizontal-axis wind-turbine blades Journal of Materials Engineering and Performance. 19: 1116-1127. DOI: 10.1007/S11665-010-9596-2 |
0.759 |
|
| 2010 |
Grujicic M, Xie X, Arakere G, Grujicic A, Wagner DW, Vallejo A. Design-optimization and material selection for a proximal radius fracture-fixation implant Journal of Materials Engineering and Performance. 19: 1090-1103. DOI: 10.1007/S11665-009-9591-7 |
0.66 |
|
| 2010 |
Grujicic M, Arakere G, Subramanian E, Sellappan V, Vallejo A, Ozen M. Structural-response analysis, fatigue-life prediction, and material selection for 1 MW horizontal-axis wind-turbine blades Journal of Materials Engineering and Performance. 19: 790-801. DOI: 10.1007/S11665-009-9558-8 |
0.69 |
|
| 2010 |
Grujicic M, Arakere G, Yalavarthy HV, He T, Yen CF, Cheeseman BA. Modeling of AA5083 material-microstructure evolution during butt friction-stir welding Journal of Materials Engineering and Performance. 19: 672-684. DOI: 10.1007/S11665-009-9536-1 |
0.711 |
|
| 2010 |
Grujicic M, Pandurangan B, Coutris N, Cheeseman BA, Roy WN, Skaggs RR. Derivation, parameterization and validation of a sandy-clay material model for use in landmine detonation computational analyses Journal of Materials Engineering and Performance. 19: 434-450. DOI: 10.1007/S11665-009-9509-4 |
0.698 |
|
| 2010 |
Grujicic M, Arakere G, Bell WC, Marvi H, Yalavarthy HV, Pandurangan B, Haque I, Fadel GM. Reliability-based design optimization for durability of ground vehicle suspension system components Journal of Materials Engineering and Performance. 19: 301-313. DOI: 10.1007/S11665-009-9482-Y |
0.784 |
|
| 2010 |
Grujicic M, Bell WC, Arakere G, He T, Xie X, Cheeseman BA. Development of a meso-scale material model for ballistic fabric and its use in flexible-armor protection systems Journal of Materials Engineering and Performance. 19: 22-39. DOI: 10.1007/S11665-009-9419-5 |
0.713 |
|
| 2010 |
Grujicic M, He T, Marvi H, Cheeseman BA, Yen CF. A comparative investigation of the use of laminate-level meso-scale and fracture-mechanics-enriched meso-scale composite-material models in ballistic-resistance analyses Journal of Materials Science. 45: 3136-3150. DOI: 10.1007/S10853-010-4290-1 |
0.393 |
|
| 2009 |
Grujicic M, Bell WC, Arakere G, Haque I. Finite element analysis of the effect of up-armouring on the off-road braking and sharp-turn performance of a high-mobility multi-purpose wheeled vehicle Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. 223: 1419-1434. DOI: 10.1243/09544070JAUTO1187 |
0.616 |
|
| 2009 |
Grujicic M, Arakere G, Bell WC, Haque I. Computational investigation of the effect of up-armouring on the reduction in occupant injury or fatality in a prototypical high-mobility multi-purpose wheeled vehicle subjected to mine blast Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. 223: 903-920. DOI: 10.1243/09544070JAUTO1170 |
0.602 |
|
| 2009 |
Grujicic M, Pandurangan B, Coutris N, Cheeseman BA, Roy WN, Skaggs RR. Derivation and validation of a material model for clayey sand for use inlandmine detonation computational analyses Multidiscipline Modeling in Materials and Structures. 5: 311-344. DOI: 10.1163/157361109789807990 |
0.695 |
|
| 2009 |
Grujicic M, Arakere G, Sellappan V, Ziegert JC, Schmueser D. Multi‐Disciplinary Design Optimization of a Composite Car Door for Structural Performance, NVH, Crashworthiness, Durability and Manufacturability Multidiscipline Modeling in Materials and Structures. 5: 1-28. DOI: 10.1108/15736105200900001 |
0.333 |
|
| 2009 |
Grujicic M, Pandurangan B, Arakere G, Bell WC, He T, Xie X. Seat-cushion and soft-tissue material modeling and a finite element investigation of the seating comfort for passenger-vehicle occupants Materials and Design. 30: 4273-4285. DOI: 10.1016/J.Matdes.2009.04.028 |
0.774 |
|
| 2009 |
Grujicic M, Bell WC, Arakere G, He T, Cheeseman BA. A meso-scale unit-cell based material model for the single-ply flexible-fabric armor Materials and Design. 30: 3690-3704. DOI: 10.1016/J.Matdes.2009.02.008 |
0.701 |
|
| 2009 |
Grujicic M, Sellappan V, Kotrika S, Arakere G, Obieglo A, Erdmann M, Holzleitner J. Suitability analysis of a polymer-metal hybrid technology based on high-strength steels and direct polymer-to-metal adhesion for use in load-bearing automotive body-in-white applications Journal of Materials Processing Technology. 209: 1877-1890. DOI: 10.1016/J.Jmatprotec.2008.04.050 |
0.689 |
|
| 2009 |
Grujicic M, Pandurangan B, Coutris N, Cheeseman BA, Fountzoulas C, Patel P, Templeton DW, Bishnoi KD. A simple ballistic material model for soda-lime glass International Journal of Impact Engineering. 36: 386-401. DOI: 10.1016/J.Ijimpeng.2008.08.001 |
0.705 |
|
| 2009 |
Grujicic M, Arakere G, He T, Bell WC, Glomski PS, Cheeseman BA. Multi-scale ballistic material modeling of cross-plied compliant composites Composites Part B: Engineering. 40: 468-482. DOI: 10.1016/J.Compositesb.2009.02.002 |
0.704 |
|
| 2009 |
Grujicic M, Glomski PS, He T, Arakere G, Bell WC, Cheeseman BA. Material modeling and ballistic-resistance analysis of armor-grade composites reinforced with high-performance fibers Journal of Materials Engineering and Performance. 18: 1169-1182. DOI: 10.1007/S11665-009-9370-5 |
0.705 |
|
| 2009 |
Grujicic M, Pandurangan B, Bell WC, Coutris N, Cheeseman BA, Fountzoulas C, Patel P, Templeton DW, Bishnoi KD. An improved mechanical material model for ballistic soda-lime glass Journal of Materials Engineering and Performance. 18: 1012-1028. DOI: 10.1007/S11665-008-9343-0 |
0.697 |
|
| 2009 |
Grujicic M, Sellappan V, Arakere G, Seyr N, Obieglo A, Erdmann M, Holzleitner J. The potential of a clinch-lock polymer metal hybrid technology for use in load-bearing automotive components Journal of Materials Engineering and Performance. 18: 893-902. DOI: 10.1007/S11665-008-9325-2 |
0.659 |
|
| 2009 |
Grujicic M, Sellappan V, He T, Seyr N, Obieglo A, Erdmann M, Holzleitner J. Total Life Cycle-Based Materials Selection for Polymer Metal Hybrid Body-in-White Automotive Components Journal of Materials Engineering and Performance. 18: 111-128. DOI: 10.1007/S11665-008-9279-4 |
0.361 |
|
| 2008 |
Grujicic M, Arakere G, He T, Gogulapati M, Cheeseman BA. A numerical investigation of the influence of yarn-level finite-element model on energy absorption by a flexible-fabric armour during ballistic impact Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 222: 259-276. DOI: 10.1243/14644207JMDA209 |
0.656 |
|
| 2008 |
Grujicic M, Arakere G, Pisu P, Ayalew B, Seyr N, Erdmann M, Holzleitner J. Application of topology, size and shape optimization methods in polymer metal hybrid structural lightweight engineering Multidiscipline Modeling in Materials and Structures. 4: 305-330. DOI: 10.1163/157361108785963028 |
0.664 |
|
| 2008 |
Grujicic M, Pandurangan B, Mocko GM, Hung ST, Cheeseman BA, Roy WN, Skaggs RR. A combined multi-material euler/lagrange computational analysis of blast loading resulting from detonation of buried landmines Multidiscipline Modeling in Materials and Structures. 4: 105-124. DOI: 10.1163/157361108784050086 |
0.702 |
|
| 2008 |
Grujicic M, Pandurangan B, Summers JD, Cheeseman BA, Roy WN, Skaggs RR. Application of the modified compaction material model to the analysis of landmine detonation in soil with various degrees of water saturation Shock and Vibration. 15: 79-99. DOI: 10.1155/2008/765494 |
0.391 |
|
| 2008 |
Grujicic M, Pandurangan B, Coutris N, Cheeseman BA, Roy WN, Skaggs RR. Computer-simulations based development of a high strain-rate, large-deformation, high-pressure material model for STANAG 4569 sandy gravel Soil Dynamics and Earthquake Engineering. 28: 1045-1062. DOI: 10.1016/J.Soildyn.2007.11.008 |
0.685 |
|
| 2008 |
Grujicic M, Pandurangan B, Qiao R, Cheeseman BA, Roy WN, Skaggs RR, Gupta R. Parameterization of the porous-material model for sand with different levels of water saturation Soil Dynamics and Earthquake Engineering. 28: 20-35. DOI: 10.1016/J.Soildyn.2007.05.001 |
0.69 |
|
| 2008 |
Grujicic M, Arakere G, He T, Bell WC, Cheeseman BA, Yen CF, Scott B. A ballistic material model for cross-plied unidirectional ultra-high molecular-weight polyethylene fiber-reinforced armor-grade composites Materials Science and Engineering A. 498: 231-241. DOI: 10.1016/J.Msea.2008.07.056 |
0.7 |
|
| 2008 |
Grujicic M, Pandurangan B, Coutris N, Cheeseman BA, Fountzoulas C, Patel P, Strassburger E. A ballistic material model for starphire®, a soda-lime transparent-armor glass Materials Science and Engineering A. 491: 397-411. DOI: 10.1016/J.Msea.2008.02.020 |
0.7 |
|
| 2008 |
Grujicic M, Bell WC, Thompson LL, Koudela KL, Cheeseman BA. Ballistic-protection performance of carbon-nanotube-doped poly-vinyl-ester-epoxy matrix composite armor reinforced with E-glass fiber mats Materials Science and Engineering A. 479: 10-22. DOI: 10.1016/J.Msea.2007.06.013 |
0.352 |
|
| 2008 |
Grujicic M, Sellappan V, Pandurangan B, Li G, Vahidi A, Seyr N, Erdmann M, Holzleitner J. Computational analysis of injection-molding residual-stress development in direct-adhesion polymer-to-metal hybrid body-in-white components Journal of Materials Processing Technology. 203: 19-36. DOI: 10.1016/J.Jmatprotec.2007.09.059 |
0.655 |
|
| 2008 |
Grujicic M, Sellappan V, Mears L, Xuan X, Seyr N, Erdmann M, Holzleitner J. Selection of the spraying technologies for over-coating of metal-stampings with thermo-plastics for use in direct-adhesion polymer metal hybrid load-bearing components Journal of Materials Processing Technology. 198: 300-312. DOI: 10.1016/J.Jmatprotec.2007.07.011 |
0.321 |
|
| 2008 |
Grujicic M, Sellappan V, Omar MA, Seyr N, Obieglo A, Erdmann M, Holzleitner J. An overview of the polymer-to-metal direct-adhesion hybrid technologies for load-bearing automotive components Journal of Materials Processing Technology. 197: 363-373. DOI: 10.1016/J.Jmatprotec.2007.06.058 |
0.307 |
|
| 2008 |
Grujicic M, Sellappan V, Arakere G, Seyr N, Erdmann M. Computational feasibility analysis of direct-adhesion polymer-to-metal hybrid technology for load-bearing body-in-white structural components Journal of Materials Processing Technology. 195: 282-298. DOI: 10.1016/J.Jmatprotec.2007.05.016 |
0.677 |
|
| 2008 |
Grujicic M, Pandurangan B, Bell WC, Daqaq M, Ma L, Seyr N, Erdmann M, Holzleitner J. A computational analysis and suitability assessment of cold-gas dynamic spraying of glass-fiber-reinforced poly-amide 6 for use in direct-adhesion polymer metal hybrid components Applied Surface Science. 254: 2136-2145. DOI: 10.1016/J.Apsusc.2007.08.077 |
0.666 |
|
| 2008 |
Grujicic M, Bell WC, He T, Cheeseman BA. Development and verification of a meso-scale based dynamic material model for plain-woven single-ply ballistic fabric Journal of Materials Science. 43: 6301-6323. DOI: 10.1007/S10853-008-2893-6 |
0.437 |
|
| 2007 |
Grujicic M, Pandurangan B, Haque I, Cheeseman BA, Roy WN, Skaggs RR. Computational analysis of mine blast on a commercial vehicle structure Multidiscipline Modeling in Materials and Structures. 3: 431-460. DOI: 10.1163/157361107782106348 |
0.657 |
|
| 2007 |
Grujicic M, Pandurangan B, Zecevic U, Koudela KL, Cheeseman BA. Ballistic performance of alumina/S-2 glass-reinforced polymer-matrix composite hybrid lightweight armor against armor piercing (ap) and non-AP projectiles Multidiscipline Modeling in Materials and Structures. 3: 287-312. DOI: 10.1163/157361107781389562 |
0.665 |
|
| 2007 |
Grujicic M, Zhao CL, Biggers SB, Kennedy JM, Morgan DR. Suitability of a coal-derived carbon-based foam for use in thermal protection systems of common aero vehicles Multidiscipline Modeling in Materials and Structures. 3: 1-26. DOI: 10.1163/157361107781360086 |
0.371 |
|
| 2007 |
Grujicic M, Pandurangan B, Zhao CL, Cheeseman B. A computational investigation of various water-induced explosion mitigation mechanisms Multidiscipline Modeling in Materials and Structures. 3: 185-212. DOI: 10.1163/157361107780744405 |
0.621 |
|
| 2007 |
Grujicic M, Sun YP, Koudela KL. The effect of covalent functionalization of carbon nanotube reinforcements on the atomic-level mechanical properties of poly-vinyl-ester-epoxy Applied Surface Science. 253: 3009-3021. DOI: 10.1016/J.Apsusc.2006.06.050 |
0.351 |
|
| 2007 |
Grujicic M, Pandurangan B, Angstadt DC, Koudela KL, Cheeseman BA. Ballistic-performance optimization of a hybrid carbon-nanotube/E-glass reinforced poly-vinyl-ester-epoxy-matrix composite armor Journal of Materials Science. 42: 5347-5359. DOI: 10.1007/S10853-006-0959-X |
0.664 |
|
| 2007 |
Grujicic M, Angstadt DC, Sun YP, Koudela KL. Micro-mechanics based derivation of the materials constitutive relations for carbon-nanotube reinforced poly-vinyl-ester-epoxy based composites Journal of Materials Science. 42: 4609-4623. DOI: 10.1007/S10853-006-0520-Y |
0.376 |
|
| 2006 |
Grujicic M, Pandurangan B, Cheeseman BA. A Computational Analysis of Detonation of Buried Mines Multidiscipline Modeling in Materials and Structures. 2: 363-387. DOI: 10.1163/157361106778554851 |
0.379 |
|
| 2006 |
Grujicic M, Pandurangan B, Cheeseman BA. The effect of degree of saturation of sand on detonation phenomena associated with shallow-buried and ground-laid mines Shock and Vibration. 13: 41-61. DOI: 10.1155/2006/652405 |
0.701 |
|
| 2006 |
Grujicic M, Pandurangan B, Koudela KL, Cheeseman BA. A computational analysis of the ballistic performance of light-weight hybrid composite armors Applied Surface Science. 253: 730-745. DOI: 10.1016/J.Apsusc.2006.01.016 |
0.672 |
|
| 2006 |
Grujicic M, Pandurangan B, Zhao CL, Biggers SB, Morgan DR. Hypervelocity impact resistance of reinforced carbon-carbon/carbon-foam thermal protection systems Applied Surface Science. 252: 5035-5050. DOI: 10.1016/J.Apsusc.2005.07.047 |
0.647 |
|
| 2006 |
Grujicic M, Zhao CL, Biggers SB, Morgan DR. Experimental investigation and modeling of effective thermal conductivity and its temperature dependence in a carbon-based foam Journal of Materials Science. 41: 2309-2317. DOI: 10.1007/S10853-006-7169-4 |
0.321 |
|
| 2006 |
Grujicic M, Zhao CL, Dusel EC, Morgan DR, Miller RS, Beasley DE. Computational analysis of the thermal conductivity of the carbon-carbon composite materials Journal of Materials Science. 41: 8244-8256. DOI: 10.1007/S10853-006-1003-X |
0.343 |
|
| 2006 |
Grujicic M, Chittajallu KM, Walsh S. Lattice Boltzmann method based computation of the permeability of the orthogonal plain-weave fabric preforms Journal of Materials Science. 41: 7989-8000. DOI: 10.1007/S10853-006-0864-3 |
0.341 |
|
| 2005 |
Grujicic M, Chittajallu KM, Cao G, Roy WN. An atomic level analysis of conductivity and strength in poly(ethylene oxide) sulfonic acid-based solid polymer electrolytes Materials Science and Engineering B: Solid-State Materials For Advanced Technology. 117: 187-197. DOI: 10.1016/J.Mseb.2004.11.024 |
0.555 |
|
| 2005 |
Grujicic M, Cao G, Pandurangan B, Roy WN. Finite element analysis-based design of a fluid-flow control nano-valve Materials Science and Engineering B: Solid-State Materials For Advanced Technology. 117: 53-61. DOI: 10.1016/J.Mseb.2004.10.020 |
0.721 |
|
| 2005 |
Grujicic M, Zhao CL, Dusel EC. The effect of thermal contact resistance on heat management in the electronic packaging Applied Surface Science. 246: 290-302. DOI: 10.1016/J.Apsusc.2004.11.030 |
0.328 |
|
| 2005 |
Grujicic M, Cao G, Roy WN. Suitability of boron-nitride single-walled nanotubes as fluid-flow conduits in nano-valve applications Applied Surface Science. 246: 149-158. DOI: 10.1016/J.Apsusc.2004.11.007 |
0.537 |
|
| 2005 |
Grujicic M, Chittajallu KM, Walsh S. Non-isothermal preform infiltration during the vacuum-assisted resin transfer molding (VARTM) process Applied Surface Science. 245: 51-64. DOI: 10.1016/J.Apsusc.2004.09.123 |
0.343 |
|
| 2005 |
Grujicic M, Zhao CL, Roy WN. A statistical analysis of the mechanical and electronic-transport properties of stochastic porous fibrous materials Journal of Materials Science. 40: 5181-5190. DOI: 10.1007/S10853-005-4411-4 |
0.37 |
|
| 2005 |
Grujicic M, Cao G, Roy WN. Computational analysis of the lattice contribution to thermal conductivity of single-walled carbon nanotubes Journal of Materials Science. 40: 1943-1952. DOI: 10.1007/S10853-005-1215-5 |
0.531 |
|
| 2004 |
Grujicic M, Cao G, Roy WN. A computational analysis of the percolation threshold and the electrical conductivity of carbon nanotubes filled polymeric materials Journal of Materials Science. 39: 4441-4449. DOI: 10.1023/B:Jmsc.0000034136.11779.96 |
0.568 |
|
| 2004 |
Grujicic M, Cao G, Roy WN. Atomistic simulations of the solubilization of single-walled carbon nanotubes in toluene Journal of Materials Science. 39: 2315-2325. DOI: 10.1023/B:Jmsc.0000019992.56323.4A |
0.546 |
|
| 2004 |
Grujicic M, Cao G, Gersten B. Atomic-scale computations of the lattice contribution to thermal conductivity of single-walled carbon nanotubes Materials Science and Engineering B: Solid-State Materials For Advanced Technology. 107: 204-216. DOI: 10.1016/J.Mseb.2003.11.012 |
0.532 |
|
| 2004 |
Grujicic M, Chittajallu KM, Walsh S. Effect of shear, compaction and nesting on permeability of the orthogonal plain-weave fabric preforms Materials Chemistry and Physics. 86: 358-369. DOI: 10.1016/J.Matchemphys.2004.03.015 |
0.347 |
|
| 2004 |
Grujicic M, Cao G, Roy WN. A computational analysis of the carbon-nanotube-based resonant-circuit sensors Applied Surface Science. 229: 316-323. DOI: 10.1016/J.Apsusc.2004.02.017 |
0.514 |
|
| 2004 |
Grujicic M, Cao G, Roy WN. Atomistic modeling of solubilization of carbon nanotubes by non-covalent functionalization with poly(p-phenylenevinylene-co-2,5-dioctoxy-m- phenylenevinylene) Applied Surface Science. 227: 349-363. DOI: 10.1016/J.Apsusc.2003.12.018 |
0.553 |
|
| 2003 |
Grujicic M, Delong JR, Derosset WS. Reliability analysis of hybrid ceramic/steel gun barrels Fatigue and Fracture of Engineering Materials and Structures. 26: 405-420. DOI: 10.1046/J.1460-2695.2003.00634.X |
0.348 |
|
| 2003 |
Grujicic M, Chittajallu KM, Walsh S. Optimization of the VARTM process for enhancement of the degree of devolatilization of polymerization by-products and solvents Journal of Materials Science. 38: 3729-3739. DOI: 10.1023/A:1025967813837 |
0.33 |
|
| 2003 |
Grujicic M, Cao G, Gersten B. Reactor length-scale modeling of chemical vapor deposition of carbon nanotubes Journal of Materials Science. 38: 1819-1830. DOI: 10.1023/A:1023252432202 |
0.524 |
|
| 2003 |
Grujicic M, Cao G, Batchu S. Crystal plasticity-based finite element analysis of deformation and fracture of polycrystalline lamellar γ-tial + α2-Ti3al alloys Journal of Materials Science. 38: 307-322. DOI: 10.1023/A:1021117716709 |
0.585 |
|
| 2003 |
Grujicic M, Saylor JR, Beasley DE, DeRosset WS, Helfritch D. Computational analysis of the interfacial bonding between feed-powder particles and the substrate in the cold-gas dynamic-spray process Applied Surface Science. 219: 211-227. DOI: 10.1016/S0169-4332(03)00643-3 |
0.344 |
|
| 2003 |
Grujicic M, Cao G, Rao AM, Tritt TM, Nayak S. UV-light enhanced oxidation of carbon nanotubes Applied Surface Science. 214: 289-303. DOI: 10.1016/S0169-4332(03)00361-1 |
0.51 |
|
| 2003 |
Grujicic M, Cao G, Singh R. The effect of topological defects and oxygen adsorption on the electronic transport properties of single-walled carbon-nanotubes Applied Surface Science. 211: 166-183. DOI: 10.1016/S0169-4332(03)00224-1 |
0.512 |
|
| 2003 |
Grujicic M, Cao G, Gersten B. Enhancement of field emission in carbon nanotubes through adsorption of polar molecules Applied Surface Science. 206: 167-177. DOI: 10.1016/S0169-4332(02)01211-4 |
0.503 |
|
| 2002 |
Grujicic M, Cao G, Miller RS. Computer modeling of the evolution of dendrite microstructure in binary alloys during non-isothermal solidification Journal of Materials Synthesis and Processing. 10: 191-203. DOI: 10.1023/A:1023022214920 |
0.554 |
|
| 2002 |
Grujicic M, Cao G. Crack growth in lamellar titanium aluminides containing beta phase precipitates Journal of Materials Science. 37: 2949-2963. DOI: 10.1023/A:1016017014355 |
0.552 |
|
| 2002 |
Grujicic M, Batchu S. Crystal plasticity analysis of earing in deep-drawn OFHC copper cups Journal of Materials Science. 37: 753-764. DOI: 10.1023/A:1013839914584 |
0.345 |
|
| 2002 |
Grujicic M, Cao G, Gersten B. An atomic-scale analysis of catalytically-assisted chemical vapor deposition of carbon nanotubes Materials Science and Engineering B: Solid-State Materials For Advanced Technology. 94: 247-259. DOI: 10.1016/S0921-5107(02)00095-8 |
0.518 |
|
| 2002 |
Columbus D, Grujicic M. A comparative discrete-dislocation/nonlocal crystal-plasticity analysis of plane-strain mode I fracture Materials Science and Engineering A. 323: 386-402. DOI: 10.1016/S0921-5093(01)01397-1 |
0.309 |
|
| 2002 |
Huang J, Fadel GM, Blouin VY, Grujicic M. Bi-objective optimization design of functionally gradient materials Materials and Design. 23: 657-666. DOI: 10.1016/S0261-3069(02)00048-1 |
0.323 |
|
| 2002 |
Grujicic M, Cao G, Gersten B. Optimization of the chemical vapor deposition process for carbon nanotubes fabrication Applied Surface Science. 199: 90-106. DOI: 10.1016/S0169-4332(02)00210-6 |
0.521 |
|
| 2001 |
Grujicic M, Batchu S. A crystal plasticity materials constitutive model for polysynthetically-twinned γ-TiAl+α2-Ti3Al single crystals Journal of Materials Science. 36: 2851-2863. DOI: 10.1023/A:1017942117952 |
0.334 |
|
| 2001 |
Grujicic M, Columbus D. A comparative discrete-dislocation/crystal-plasticity analysis of bending of a single-crystalline microbeam Journal of Materials Science. 36: 2179-2188. DOI: 10.1023/A:1017591916492 |
0.319 |
|
| 2001 |
Grujicic M, Cao G, Figliola RS. Computer simulations of the evolution of solidification microstructure in the LENS™ rapid fabrication process Applied Surface Science. 183: 43-57. DOI: 10.1016/S0169-4332(01)00553-0 |
0.583 |
|
| 2001 |
Columbus D, Grujicic M. A comparison of mode I fracture behavior of fcc and bcc metallic materials: A discrete dislocation analysis Applied Surface Science. 180: 138-161. DOI: 10.1016/S0169-4332(01)00340-3 |
0.364 |
|
| 2000 |
Grujicic M, Zhang Y. Crystal plasticity analysis of stress-assisted martensitic transformation in Ti-10V-2Fe-3Al (wt.%) Journal of Materials Science. 35: 4635-4647. DOI: 10.1023/A:1004826301287 |
0.322 |
|
| 1999 |
Grujicic M, Zhang Y. Combined atomistic-crystal plasticity analysis of the effect of beta phase precipitates on deformation and fracture of lamellar γ+α2 titanium aluminide Journal of Materials Science. 34: 1419-1437. DOI: 10.1023/A:1004585912992 |
0.317 |
|
| 1999 |
Grujicic M, Zhang Y. Crystal plasticity analysis of the effect of dispersed β-phase on deformation and fracture of lamellar γ+α2 titanium aluminide Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 265: 285-300. DOI: 10.1016/S0921-5093(98)00858-2 |
0.318 |
|
| 1998 |
Grujicic M, Lai SG. Effect of martensitic transformation in Ti-15 at% V β-phase particles on lamellar boundary decohesion in γ-TiAl: Part I Derivation of interface decohesion potentials Journal of Materials Science. 33: 4389-4400. DOI: 10.1023/A:1004489016294 |
0.314 |
|
| 1998 |
Grujicic M, Lai SG. Effect of martensitic transformation in Ti-15 at % V β-phase particles on lamellar boundary decohesion in γ-TiAl: Part II Finite element analysis of crack-bridging phenomenon Journal of Materials Science. 33: 4401-4415. DOI: 10.1023/A:1004441129440 |
0.318 |
|
| 1998 |
Owen WS, Grujicic M. Strain aging of austenitic hadfield manganese steel Acta Materialia. 47: 111-126. DOI: 10.1016/S1359-6454(98)00347-4 |
0.311 |
|
| 1998 |
Grujicic M, Zhang Y. Determination of effective elastic properties of functionally graded materials using Voronoi cell finite element method Materials Science and Engineering A. 251: 64-76. DOI: 10.1016/S0921-5093(98)00647-9 |
0.384 |
|
| 1998 |
Grujicic M, Zhao H. Optimization of 316 stainless steel/alumina functionally graded material for reduction of damage induced by thermal residual stresses Materials Science and Engineering A. 252: 117-132. DOI: 10.1016/S0921-5093(98)00618-2 |
0.384 |
|
| 1997 |
Grujicic M, Sankaran N. Continuum analysis of dispersed-phase martensitic transformation toughening of two-phase metallic materials International Journal of Fracture. 83: 337-358. DOI: 10.1023/A:1007345127280 |
0.339 |
|
| 1997 |
Dang P, Grujicic M. The effect of crack-tip material evolution on fracture toughness - An atomistic simulation study of the Ti-V alloy system Acta Materialia. 45: 75-87. DOI: 10.1016/S1359-6454(96)00154-1 |
0.309 |
|
| 1997 |
Grujicic M, Sankaran N. Dispersed-phase martensitic transformation controlled deformation behavior of two-phase metallic materials International Journal of Solids and Structures. 34: 4421-4446. DOI: 10.1016/S0020-7683(97)00012-7 |
0.328 |
|
| 1996 |
Rawers J, Grujicic M. Effects of metal composition and temperature on the yield strength of nitrogen strengthened stainless steels Materials Science and Engineering A. 207: 188-194. DOI: 10.1016/0921-5093(95)10031-8 |
0.335 |
|
| 1995 |
Haidemenopoulos GN, Grujicic M, Olson GB, Cohen M. Thermodynamics-based alloy design criteria for austenite stabilization and transformation toughening in the FeNiCo system Journal of Alloys and Compounds. 220: 142-147. DOI: 10.1016/0925-8388(94)06015-0 |
0.322 |
|
| 1995 |
Grujicic M, Zhou XW. Atomistic simulation of thermally activated glide of dislocations in FeNiCrN austenite Materials Science and Engineering A. 190: 87-98. DOI: 10.1016/0921-5093(94)09618-7 |
0.306 |
|
| 1994 |
Grujicic M. The core structure of (a/2)〈110〉 screw dislocations in FeNiCrN austenite Materials Science and Engineering A. 183: 223-232. DOI: 10.1016/0921-5093(94)90906-7 |
0.301 |
|
| 1994 |
Grujicic M. An analysis of the isothermal isobaric chemical vapor infiltration of TiB2 Calphad. 18: 81-88. DOI: 10.1016/0364-5916(94)90009-4 |
0.307 |
|
| 1993 |
Grujicic M, Arokiaraj S. Chemical compatibility between zirconia dispersion and gamma titanium aluminide matrix Calphad. 17: 133-140. DOI: 10.1016/0364-5916(93)90013-2 |
0.31 |
|
| 1992 |
Grujicic M, Owen WS. A Chemical interstitial order-based model for nitrogen strengthening of FeNiCr austenite Calphad. 16: 291-299. DOI: 10.1016/0364-5916(92)90027-U |
0.301 |
|
| 1991 |
Grujicic M. Design of M2C carbides for coarsening resistance Calphad. 15: 179-184. DOI: 10.1016/0364-5916(91)90016-D |
0.331 |
|
| 1991 |
Lee HM, Allen SM, Grujicic M. Coarsening resistance of M2C carbides in secondary hardening steels: Part II. Alloy design aided by a thermochemical database Metallurgical Transactions A. 22: 2869-2876. DOI: 10.1007/Bf02650248 |
0.326 |
|
| 1991 |
Lee HM, Allen SM, Grujicic M. Coarsening resistance of M2C carbides in secondary hardening steels: Part I. Theoretical model for multicomponent coarsening kinetics Metallurgical Transactions A. 22: 2863-2868. DOI: 10.1007/Bf02650247 |
0.346 |
|
| 1991 |
Grujicic M. Implication of elastic coherency in secondary hardening of high Co-Ni martensitic steels Journal of Materials Science. 26: 1357-1362. DOI: 10.1007/Bf00544477 |
0.315 |
|
| 1990 |
Grujicic M. Design of precipitated austenite for dispersed-phase transformation toughening in high strength CoNi steels Materials Science and Engineering A. 128: 201-207. DOI: 10.1016/0921-5093(90)90228-U |
0.305 |
|
| 1990 |
Grujicic M. Stabilization of precipitated austenite in tempered FeMnC steels Materials Science and Engineering A. 127: 79-84. DOI: 10.1016/0921-5093(90)90192-6 |
0.33 |
|
| 1990 |
Grujicic M. Thermodynamics aided design of high Co-Ni secondary hardening steels Calphad. 14: 49-59. DOI: 10.1016/0364-5916(90)90039-3 |
0.33 |
|
| 1989 |
Grujicic M. Coherent precipitation of M2C carbides in AF1410 steel Materials Science and Engineering A. 117: 215-220. DOI: 10.1016/0921-5093(89)90103-2 |
0.302 |
|
| 1989 |
Haidemenopoulos GN, Grujicic M, Olson GB, Cohen M. On the optimization of precipitated austenite for transformation toughening of steels Calphad. 13: 215-223. DOI: 10.1016/0364-5916(89)90001-1 |
0.321 |
|
| 1986 |
Grujicic M, Wang I, Owen WS. Precipitate/austenite equilibrium in a titanium-niobium ultra low carbon steel Calphad. 10: 117-128. DOI: 10.1016/0364-5916(86)90016-7 |
0.311 |
|
| 1985 |
Grujicic M, Olson GB, Owen WS. Mobility of martensitic interfaces Metallurgical Transactions A. 16: 1713-1722. DOI: 10.1007/Bf02670359 |
0.302 |
|
| Show low-probability matches. |