| Year |
Citation |
Score |
| 2020 |
Jerred ND, Khanal R, Benson MT, Mariani RD, Choudhury S, Charit I. Nd, SbNd and Sb3Nd4 and their interactions with the cladding alloy HT9 Journal of Nuclear Materials. 541: 152387. DOI: 10.1016/J.Jnucmat.2020.152387 |
0.332 |
|
| 2020 |
Khanal R, Jerred N, Benson MT, Xie Y, Mariani RD, Charit I, Choudhury S. Interactions and immobilization of lanthanides with dopants in uranium-based metallic fuels Journal of Nuclear Materials. 540: 152372. DOI: 10.1016/J.Jnucmat.2020.152372 |
0.342 |
|
| 2019 |
Jerred ND, Khanal R, Benson MT, Perez E, King JA, Dubey M, Burns J, Charit I, Choudhury S, Mariani RD. Evaluation of Tellurium as a Fuel Additive in Neodymium-Containing U-Zr Metallic Fuel. Scientific Reports. 9: 16043. PMID 31690752 DOI: 10.1038/S41598-019-51852-Z |
0.359 |
|
| 2019 |
Shaber N, Stephens R, Ramirez J, Potirniche GP, Taylor M, Charit I, Pugesek H. Fatigue and creep-fatigue crack growth in alloy 709 at elevated temperatures Materials At High Temperatures. 36: 562-574. DOI: 10.1080/09603409.2019.1664079 |
0.384 |
|
| 2019 |
Morrison ML, Gould J, Charit I, Hassan T. Performance Evaluation of Surface-Activated Solid-State Welding for ASTM A992 Structural Steel Journal of Materials in Civil Engineering. 31: 04019168. DOI: 10.1061/(Asce)Mt.1943-5533.0002805 |
0.348 |
|
| 2019 |
Taylor M, Ramirez J, Charit I, Potirniche GP, Stephens R, Glazoff MV. Creep behavior of Alloy 709 at 700 °C Materials Science and Engineering: A. 762: 138083. DOI: 10.1016/J.Msea.2019.138083 |
0.548 |
|
| 2019 |
Webb J, Gollapudi S, Charit I. An overview of creep in tungsten and its alloys International Journal of Refractory Metals and Hard Materials. 82: 69-80. DOI: 10.1016/J.Ijrmhm.2019.03.022 |
0.54 |
|
| 2019 |
Ramirez J, Potirniche G, Shaber N, Taylor M, Pugesek H, Stephens R, Charit I. The influence of plasticity-induced crack closure on creep-fatigue crack growth in two heat-resistant steels International Journal of Fatigue. 125: 291-298. DOI: 10.1016/J.Ijfatigue.2019.04.007 |
0.315 |
|
| 2019 |
Goel S, Sittiho A, Charit I, Klement U, Joshi S. Effect of post-treatments under hot isostatic pressure on microstructural characteristics of EBM-built Alloy 718 Additive Manufacturing. 28: 727-737. DOI: 10.1016/J.Addma.2019.06.002 |
0.375 |
|
| 2019 |
Kundu A, Sittiho A, Charit I, Jaques B, Jiang C. Development of Fe-9Cr Alloy via High-Energy Ball Milling and Spark Plasma Sintering Jom. 71: 2846-2855. DOI: 10.1007/S11837-019-03530-8 |
0.517 |
|
| 2019 |
Kundu A, Shrestha N, Korjenic A, Raja KS, Charit I. A study on microstructural evolution and corrosion behavior of spark plasma sintered Fe–Cr alloy system Journal of Materials Science. 54: 14171-14188. DOI: 10.1007/S10853-019-03861-6 |
0.52 |
|
| 2018 |
Mohamed W, Gollapudi S, Charit I, Murty KL. Formability of a wrought Mg alloy evaluated by impression testing Materials Science and Engineering: A. 712: 140-145. DOI: 10.1016/J.Msea.2017.11.088 |
0.505 |
|
| 2018 |
Benson MT, Xie Y, King JA, Tolman KR, Mariani RD, Charit I, Zhang J, Short MP, Choudhury S, Khanal R, Jerred N. Characterization of U-10Zr-2Sn-2Sb and U-10Zr-2Sn-2Sb-4Ln to assess Sn+Sb as a mixed additive system to bind lanthanides Journal of Nuclear Materials. 510: 210-218. DOI: 10.1016/J.Jnucmat.2018.08.017 |
0.351 |
|
| 2018 |
Sittiho A, Tungala V, Charit I, Mishra RS. Microstructure, mechanical properties and strengthening mechanisms of friction stir welded Kanthal APMT™ steel Journal of Nuclear Materials. 509: 435-444. DOI: 10.1016/J.Jnucmat.2018.07.001 |
0.523 |
|
| 2018 |
Jerred N, Charit I, Zirker L, Cole J. Pressure resistance welding of MA-957 to HT-9 for advanced reactor applications Journal of Nuclear Materials. 508: 265-277. DOI: 10.1016/J.Jnucmat.2018.05.046 |
0.406 |
|
| 2018 |
Charit I, Mishra RS. Effect of friction stir processed microstructure on tensile properties of an Al-Zn-Mg-Sc alloy upon subsequent aging heat treatment Journal of Materials Science & Technology. 34: 214-218. DOI: 10.1016/J.Jmst.2017.10.021 |
0.493 |
|
| 2018 |
Roberts D, Zhang Y, Charit I, Zhang J. A comparative study of microstructure and high-temperature mechanical properties of 15-5 PH stainless steel processed via additive manufacturing and traditional manufacturing Progress in Additive Manufacturing. 3: 183-190. DOI: 10.1007/S40964-018-0051-5 |
0.342 |
|
| 2017 |
Akram J, Kalvala PR, Misra M, Charit I. Creep behavior of dissimilar metal weld joints between P91 and AISI 304 Materials Science and Engineering: A. 688: 396-406. DOI: 10.1016/J.Msea.2017.02.026 |
0.487 |
|
| 2017 |
Pasebani S, Charit I, Guria A, Wu Y, Burns J, Butt DP, Cole JI, Shao L. A preliminary investigation of high dose ion irradiation response of a lanthana-bearing nanostructured ferritic steel processed via spark plasma sintering Journal of Nuclear Materials. 495: 78-84. DOI: 10.1016/J.Jnucmat.2017.08.010 |
0.764 |
|
| 2017 |
Sitler SJ, Charit I, Raja KS. Room Temperature Corrosion Behavior of ZrB2-HfB2 Solid Solutions in Acidic and Basic Aqueous Environments Electrochimica Acta. 246: 173-189. DOI: 10.1016/J.Electacta.2017.06.033 |
0.381 |
|
| 2017 |
Sitler SJ, Raja KS, Charit I. Hot corrosion behavior of ZrB2-HfB2 solid solutions in KCl and K2SO4 at 1500 °C Ceramics International. 43: 17071-17085. DOI: 10.1016/J.Ceramint.2017.09.122 |
0.423 |
|
| 2017 |
Guria A, Charit I. Tensile properties of accident-tolerant aluminum-bearing ferritic steels Annals of Nuclear Energy. 100: 82-88. DOI: 10.1016/J.Anucene.2016.09.018 |
0.476 |
|
| 2016 |
Dutt AK, Pasebani S, Charit I, Mishra RS. On the creep behavior of dual-scale particle strengthened nickel based alloy Materials Science and Engineering: A. 676: 406-410. DOI: 10.1016/J.Msea.2016.09.008 |
0.778 |
|
| 2016 |
Shrestha T, Basirat M, Alsagabi S, Sittiho A, Charit I, Potirniche GP. Creep rupture behavior of welded Grade 91 steel Materials Science and Engineering: A. 669: 75-86. DOI: 10.1016/J.Msea.2016.05.065 |
0.702 |
|
| 2016 |
Pasebani S, Charit I, Wu Y, Burns J, Allahar KN, Butt DP, Cole JI, Alsagabi SF. Lanthana-bearing nanostructured ferritic steels via spark plasma sintering Journal of Nuclear Materials. 470: 297-306. DOI: 10.1016/J.Jnucmat.2015.12.035 |
0.794 |
|
| 2016 |
Sitler S, Hill C, Raja KS, Charit I. Transition Metal Diborides as Electrode Material for MHD Direct Power Extraction: High-temperature Oxidation of ZrB2-HfB2 Solid Solution with LaB6 Addition Metallurgical and Materials Transactions E. 3: 90-99. DOI: 10.1007/S40553-016-0072-2 |
0.367 |
|
| 2016 |
Alsagabi S, Ninlachart J, Raja KS, Charit I. Passivity and Localized Corrosion of AZ31 Magnesium Alloy in High pH Electrolytes Journal of Materials Engineering and Performance. 25: 2364-2374. DOI: 10.1007/S11665-016-2101-9 |
0.766 |
|
| 2016 |
Alsagabi S, Charit I, Pasebani S. The Irradiation Performance and Microstructural Evolution in 9Cr-2W Steel Under Ion Irradiation Journal of Materials Engineering and Performance. 25: 401-408. DOI: 10.1007/S11665-015-1841-2 |
0.79 |
|
| 2016 |
Pasebani S, Charit I, Butt DP, Cole JI, Wu Y, Burns J. Sintering Behavior of Lanthana-Bearing Nanostructured Ferritic Steel Consolidated via Spark Plasma Sintering Advanced Engineering Materials. 18: 324-332. DOI: 10.1002/Adem.201500294 |
0.79 |
|
| 2015 |
Basirat M, Shrestha T, Barannyk LL, Potirniche GP, Charit I. A creep damage model for high-temperature deformation and failure of 9Cr-1Mo steel weldments Metals. 5: 1487-1506. DOI: 10.3390/met5031487 |
0.667 |
|
| 2015 |
Shrestha T, Alsagabi SF, Charit I, Potirniche GP, Glazoff MV. Effect of heat treatment on microstructure and hardness of grade 91 steel Metals. 5: 131-149. DOI: 10.3390/met5010131 |
0.801 |
|
| 2015 |
Pasebani S, Dutt AK, Burns J, Charit I, Mishra RS. Oxide dispersion strengthened nickel based alloys via spark plasma sintering Materials Science and Engineering A. 630: 155-169. DOI: 10.1016/J.Msea.2015.01.066 |
0.786 |
|
| 2015 |
Pasebani S, Charit I, Mishra RS. Effect of tool rotation rate on constituent particles in a friction stir processed 2024Al alloy Materials Letters. 160: 64-67. DOI: 10.1016/J.Matlet.2015.07.074 |
0.73 |
|
| 2015 |
Guria A, Charit I. Observation of serrated flow in APMT™ steel Materials Letters. 160: 55-57. DOI: 10.1016/J.Matlet.2015.07.072 |
0.417 |
|
| 2015 |
Pasebani S, Charit I, Burns J, Alsagabi S, Butt DP, Cole JI, Price LM, Shao L. Microstructural stability of a self-ion irradiated lanthana-bearing nanostructured ferritic steel Journal of Nuclear Materials. 462: 191-204. DOI: 10.1016/J.Jnucmat.2015.03.040 |
0.793 |
|
| 2015 |
Shrestha T, Charit I, Potirniche G. In Situ Tensile Deformation and Residual Stress Measurement by Neutron Diffraction in Modified 9Cr-1Mo Steel Journal of Materials Engineering and Performance. 24: 4710-4720. DOI: 10.1007/S11665-015-1752-2 |
0.669 |
|
| 2015 |
Opoku M, Kanakala R, Charit I. Superplasticity in ceramics at high temperature Ceramic Transactions. 253: 207-217. |
0.355 |
|
| 2014 |
Pasebani S, Dutt AK, Charit I, Mishra RS. Nickel-chromium alloys: Engineered microstructure via spark plasma sintering Advanced Materials Research. 783: 1099-1104. DOI: 10.4028/Www.Scientific.Net/Msf.783-786.1099 |
0.801 |
|
| 2014 |
Alsagabi S, Shrestha T, Charit I. High temperature tensile deformation behavior of Grade 92 steel Journal of Nuclear Materials. 453: 151-157. DOI: 10.1016/J.Jnucmat.2014.06.033 |
0.795 |
|
| 2014 |
Pasebani S, Charit I. Effect of alloying elements on the microstructure and mechanical properties of nanostructured ferritic steels produced by spark plasma sintering Journal of Alloys and Compounds. 599: 206-211. DOI: 10.1016/J.Jallcom.2014.01.243 |
0.79 |
|
| 2014 |
Chitrada K, Raja KS, Pesic B, Charit I. Corrosion behavior of surface modified NdFeB permanent magnet in dilute chloride environments Electrochimica Acta. 123: 23-32. DOI: 10.1016/J.Electacta.2014.01.011 |
0.359 |
|
| 2014 |
Webb JA, Charit I. Fabrication of cermets via spark-plasma sintering for nuclear applications Jom. 66: 943-952. DOI: 10.1007/S11837-014-0946-7 |
0.413 |
|
| 2014 |
Wang J, Yuan W, Mishra RS, Charit I. An evaluation of creep behaviour in friction stir welded MA754 alloy Journal of Materials Engineering and Performance. 23: 3159-3164. DOI: 10.1007/S11665-014-1092-7 |
0.547 |
|
| 2014 |
Shrestha T, Gollapudi S, Charit I, Murty KL. Creep deformation behavior of Sn-Zn solder alloys Journal of Materials Science. 49: 2127-2135. DOI: 10.1007/S10853-013-7905-5 |
0.707 |
|
| 2014 |
Wu YQ, Allahar KN, Burns J, Jaques B, Charit I, Butt DP, Cole JI. Fe-Cr-Mo based ODS alloys via spark plasma sintering: A combinational characterization study by TEM and APT Crystal Research and Technology. 49: 645-652. DOI: 10.1002/Crat.201300173 |
0.542 |
|
| 2013 |
Shrestha T, Basirat M, Charit I, Potirniche GP, Rink KK. Creep rupture behavior of Grade 91 steel Materials Science and Engineering A. 565: 382-391. DOI: 10.1016/J.Msea.2012.12.031 |
0.685 |
|
| 2013 |
Wang J, Yuan W, Mishra RS, Charit I. Microstructural evolution and mechanical properties of friction stir welded ODS alloy MA754 Journal of Nuclear Materials. 442: 1-6. DOI: 10.1016/J.Jnucmat.2013.08.012 |
0.55 |
|
| 2013 |
Allahar KN, Burns J, Jaques B, Wu YQ, Charit I, Cole J, Butt DP. Ferritic oxide dispersion strengthened alloys by spark plasma sintering Journal of Nuclear Materials. 443: 256-265. DOI: 10.1016/J.Jnucmat.2013.07.019 |
0.549 |
|
| 2013 |
Pasebani S, Charit I, Butt DP, Cole JI. A preliminary study on the development of La2O 3-bearing nanostructured ferritic steels via high energy ball milling Journal of Nuclear Materials. 434: 282-286. DOI: 10.1016/J.Jnucmat.2012.11.020 |
0.751 |
|
| 2013 |
Wang J, Yuan W, Mishra RS, Charit I. Microstructure and mechanical properties of friction stir welded oxide dispersion strengthened alloy Journal of Nuclear Materials. 432: 274-280. DOI: 10.1016/J.Jnucmat.2012.08.001 |
0.535 |
|
| 2013 |
Pasebani S, Charit I, Wu YQ, Butt DP, Cole JI. Mechanical alloying of lanthana-bearing nanostructured ferritic steels Acta Materialia. 61: 5605-5617. DOI: 10.1016/J.Actamat.2013.06.002 |
0.782 |
|
| 2012 |
Alsagabi S, Charit I. Fundamental studies on the thermal stability and mechanical characteristics of AZ31 alloy Materials Science and Engineering A. 536: 64-72. DOI: 10.1016/J.Msea.2011.12.054 |
0.812 |
|
| 2012 |
Shrestha T, Basirat M, Charit I, Potirniche GP, Rink KK, Sahaym U. Creep deformation mechanisms in modified 9Cr-1Mo steel Journal of Nuclear Materials. 423: 110-119. DOI: 10.1016/J.Jnucmat.2012.01.005 |
0.664 |
|
| 2012 |
Basirat M, Shrestha T, Potirniche GP, Charit I, Rink K. A study of the creep behavior of modified 9Cr-1Mo steel using continuum-damage modeling International Journal of Plasticity. 37: 95-107. DOI: 10.1016/J.Ijplas.2012.04.004 |
0.694 |
|
| 2012 |
Basirat M, Shrestha T, Potirniche GP, Charit I, Rink K. Creep damage analysis in welded joints of modified 9Cr-1Mo steel Transactions of the American Nuclear Society. 107: 468-469. |
0.679 |
|
| 2011 |
Webb JA, Charit I. Monte Carlo criticality analysis of simple geometries containing tungsten-rhenium alloys engrained with uranium dioxide and uranium mononitride Nuclear Engineering and Design. 241: 2968-2973. DOI: 10.1016/J.Nucengdes.2011.05.025 |
0.333 |
|
| 2011 |
Seok CS, Marple B, Song YJ, Gollapudi S, Charit I, Murty KL. High temperature deformation characteristics of Zirlo™ tubing via ring-creep and burst tests Nuclear Engineering and Design. 241: 599-602. DOI: 10.1016/J.Nucengdes.2010.04.017 |
0.442 |
|
| 2011 |
Shrestha T, Basirat M, Charit I, Potirniche G, Rink K. Creep studies of modified 9Cr-1Mo steel for very high temperature reactor pressure vessel applications Ceramic Transactions. 227: 231-240. DOI: 10.1002/9781118144527.ch22 |
0.677 |
|
| 2011 |
Allahar KN, Butt DP, Webb J, Charit I. Electrochemical properties of spark plasma sintered tungsten Nace - International Corrosion Conference Series. |
0.369 |
|
| 2011 |
Wuthrich Z, Shrestha T, Charit I, Rink K, Basirat M, Potirniche GP. Studies of the effect of heat treatment on hardness and creep behavior of a modified 9Cr-1Mo steel Asme 2011 International Mechanical Engineering Congress and Exposition, Imece 2011. 8: 395-401. |
0.702 |
|
| 2010 |
Gollapudi S, Rajulapati KV, Charit I, Koch CC, Scattergood RO, Murty KL. Creep in nanocrystalline materials: Role of stress assisted grain growth Materials Science and Engineering A. 527: 5773-5781. DOI: 10.1016/J.Msea.2010.05.048 |
0.406 |
|
| 2010 |
Gollapudi S, Rajulapati KV, Charit I, Youssef KM, Koch CC, Scattergood RO, Murty KL. Understanding creep in nanocrystalline materials Transactions of the Indian Institute of Metals. 63: 373-378. DOI: 10.1007/S12666-010-0050-9 |
0.389 |
|
| 2010 |
Linga Murty K, Gollapudi S, Charit I. Newtonian viscous creep in metals Transactions of the Indian Institute of Metals. 63: 85-91. DOI: 10.1007/S12666-010-0012-2 |
0.508 |
|
| 2010 |
Prabhakaran R, Wang J, Yuan W, Chitrada K, Cole J, Charit I, Mishra R. Friction stir welding of oxide dispersion strengthened alloys Transactions of the American Nuclear Society. 102: 857-858. |
0.359 |
|
| 2009 |
Faheem M, McCormick S, Charit I. Microstructural and DSC studies of Alloy 718™ Plus Thermochimica Acta. 496: 151-155. DOI: 10.1016/j.tca.2009.07.014 |
0.399 |
|
| 2008 |
Charit I, Murty KL, Koch CC. Creep properties of advanced steels for high efficiency power plants Advances in Materials Technology For Fossil Power Plants - Proceedings From the 5th International Conference. 281-292. DOI: 10.1361/cp2007epri0281 |
0.356 |
|
| 2008 |
Marple B, Song YJ, Gollapudi S, Murty KL, Charit I. Stress rupture characteristics of zirconium alloy cladding under closed-end internal pressurization International Conference On Nuclear Engineering, Proceedings, Icone. 1: 385-388. DOI: 10.1115/ICONE16-48006 |
0.305 |
|
| 2008 |
Gollapudi S, Bhosle V, Charit I, Murty KL. Newtonian viscous creep in Ti-3Al-2.5V Philosophical Magazine. 88: 1357-1367. DOI: 10.1080/14786430802144154 |
0.421 |
|
| 2008 |
Charit I, Mishra RS. Abnormal grain growth in friction stir processed alloys Scripta Materialia. 58: 367-371. DOI: 10.1016/J.Scriptamat.2007.09.052 |
0.465 |
|
| 2008 |
Murty KL, Charit I. Structural materials for Gen-IV nuclear reactors: Challenges and opportunities Journal of Nuclear Materials. 383: 189-195. DOI: 10.1016/J.Jnucmat.2008.08.044 |
0.415 |
|
| 2008 |
Murty KL, Charit I. Static strain aging and dislocation-impurity interactions in irradiated mild steel Journal of Nuclear Materials. 382: 217-222. DOI: 10.1016/J.Jnucmat.2008.08.008 |
0.333 |
|
| 2008 |
Charit I, Murty KL. Creep behavior of niobium-modified zirconium alloys Journal of Nuclear Materials. 374: 354-363. DOI: 10.1016/J.Jnucmat.2007.08.019 |
0.526 |
|
| 2008 |
Gollapudi S, Charit I, Murty KL. Creep mechanisms in Ti-3Al-2.5V alloy tubing deformed under closed-end internal gas pressurization Acta Materialia. 56: 2406-2419. DOI: 10.1016/J.Actamat.2008.01.052 |
0.45 |
|
| 2008 |
Charit I, Murty KL. Structural materials for the next generation nuclear reactors - An overview Societe Francaise D'Energie Nucleaire - International Congress On Advances in Nuclear Power Plants - Icapp 2007, "the Nuclear Renaissance At Work",. 3: 1772-1779. |
0.359 |
|
| 2007 |
Charit I, Linga Murty K. Texture and creep anisotropy in zirconium alloys Materials Science Forum. 539: 3377-3382. DOI: 10.4028/Www.Scientific.Net/Msf.539-543.3377 |
0.51 |
|
| 2007 |
Johannes LB, Charit I, Mishra RS, Verma R. Enhanced superplasticity through friction stir processing in continuous cast AA5083 aluminum Materials Science and Engineering A. 464: 351-357. DOI: 10.1016/J.Msea.2007.02.012 |
0.436 |
|
| 2007 |
Srikant G, Marple B, Charit I, Murty KL. Characterization of stress rupture behavior of commercial-purity-Ti via burst testing Materials Science and Engineering A. 463: 203-207. DOI: 10.1016/J.Msea.2006.06.145 |
0.392 |
|
| 2007 |
Charit I, Seok CS, Murty KL. Synergistic effects of interstitial impurities and radiation defects on mechanical characteristics of ferritic steels Journal of Nuclear Materials. 361: 262-273. DOI: 10.1016/J.Jnucmat.2006.12.003 |
0.405 |
|
| 2007 |
Murty KL, Charit I. Effect of crystallographic texture on mechanical and corrosion properties of zirconium alloys Tms Annual Meeting. 89-98. |
0.4 |
|
| 2006 |
Murty KL, Charit I. Texture development and anisotropic deformation of zircaloys Progress in Nuclear Energy. 48: 325-359. DOI: 10.1016/J.Pnucene.2005.09.011 |
0.483 |
|
| 2006 |
Charit I, Murty KL. On the creep behavior of niobium-modified zirconium alloys Proceedings of the 2006 International Congress On Advances in Nuclear Power Plants, Icapp'06. 2006: 2114-2123. |
0.432 |
|
| 2006 |
Charit I, Murty KL. High temperature mechanical properties of molybdenum solid solution alloys Proceedings of the 2006 International Congress On Advances in Nuclear Power Plants, Icapp'06. 2006: 2726-2734. |
0.453 |
|
| 2005 |
Dutta A, Charit I, Johannes LB, Mishra RS. Deep cup forming by superplastic punch stretching of friction stir processed 7075 Al alloy Materials Science and Engineering A. 395: 173-179. DOI: 10.1016/J.Msea.2004.12.016 |
0.397 |
|
| 2005 |
Charit I, Mishra RS. Low temperature superplasticity in a friction-stir-processed ultrafine grained Al-Zn-Mg-Sc alloy Acta Materialia. 53: 4211-4223. DOI: 10.1016/J.Actamat.2005.05.021 |
0.557 |
|
| 2005 |
Johannes LB, Charit I. High strain rate superplastic properties of 7075 aluminum via friction stir processing Friction Stir Welding and Processing Iii - Proceedings of a Symposium Sponsored by the Shaping and Forming Committee of (Mpmd) of the Minerals, Metals and Materials Society, Tms. 123-130. |
0.366 |
|
| 2005 |
Charit I, Yan J, Marple B, Murty KL. Effects of alloying and thermal treatment on creep anisotropy of zircaloys: Application to in-reactor performance Materials Science and Technology. 1: 41-52. |
0.366 |
|
| 2004 |
Charit I, Mishra RS. Evaluation of microstructure and superplasticity in friction stir processed 5083 Al alloy Journal of Materials Research. 19: 3329-3342. DOI: 10.1557/Jmr.2004.0429 |
0.501 |
|
| 2004 |
Charit I, Mishra RS. Ultrafine grained aluminum alloys via friction stir processing Ultrafine Grained Materials Iii. 95-101. |
0.421 |
|
| 2004 |
Charit I, Ma ZY, Mishra RS. High strain rate superplasticity in aluminum alloys via friction stir processing Advances in Superplasticity and Superplastic Forming. 201-209. |
0.407 |
|
| 2003 |
Charit I, Mishra RS. High strain rate superplasticity in a commercial 2024 Al alloy via friction stir processing Materials Science and Engineering A. 359: 290-296. DOI: 10.1016/S0921-5093(03)00367-8 |
0.406 |
|
| 2003 |
Mishra RS, Ma ZY, Charit I. Friction stir processing: A novel technique for fabrication of surface composite Materials Science and Engineering A. 341: 307-310. DOI: 10.1016/S0921-5093(02)00199-5 |
0.354 |
|
| 2003 |
Charit I, Ma ZY, Mishra RS. Microstructural refinement and control in friction stir processed aluminum alloys for superplasticity Tms Annual Meeting. 331-341. |
0.422 |
|
| 2002 |
Charit I, Mishra RS, Mahoney MW. Multi-sheet structures in 7475 aluminum by friction stir welding in concert with post-weld superplastic forming Scripta Materialia. 47: 631-636. DOI: 10.1016/S1359-6462(02)00257-9 |
0.425 |
|
| 2001 |
Charit I, Chokshi AH. Experimental evidence for diffusion creep in the superplastic 3 mol% yttria-stabilized tetragonal zirconia Acta Materialia. 49: 2239-2249. DOI: 10.1016/S1359-6454(01)00131-8 |
0.429 |
|
| 2001 |
Charit I, Mishra RS, Jata KV. Superplastic behavior of friction stir processed aluminum-lithium alloy Friction Stir Welding and Processing. 225-234. |
0.417 |
|
| Show low-probability matches. |
