Year |
Citation |
Score |
2020 |
Balke E, Nellis G, Klein S, Skye H, Payne V, Ullah T. Detailed Energy Model of the NIST Net-Zero Energy Residential Test Facility: Development, Modification, and Validation. Science and Technology For the Built Environment. 27. PMID 31080881 DOI: 10.1080/23744731.2017.1381828 |
0.751 |
|
2020 |
Fehring BE, Morse RW, Chan J, Dressler KM, Hurlburt ET, Nellis GF, Berson A. Instantaneous Optical Measurement of the Temperature at the Interface Between a Wall and a Thin Liquid Film Journal of Heat Transfer. 142. DOI: 10.1115/1.4048090 |
0.319 |
|
2020 |
Sixel W, Liu M, Nellis G, Sarlioglu B. Cooling of Windings in Electric Machines via 3-D Printed Heat Exchanger Ieee Transactions On Industry Applications. 56: 4718-4726. DOI: 10.1109/Tia.2020.2997902 |
0.313 |
|
2020 |
Liu M, Sixel W, Sarlioglu B, Nellis G. Influence of winding topologies and encapsulation materials on FSPM machine thermal performance Iet Electric Power Applications. 14: 1604-1611. DOI: 10.1049/Iet-Epa.2019.1058 |
0.31 |
|
2020 |
Koutsakis G, Nellis G, Ghandhi J. Reprint of: Surface temperature of a multi-layer thermal barrier coated wall subject to an unsteady heat flux International Journal of Heat and Mass Transfer. 161: 120187. DOI: 10.1016/J.Ijheatmasstransfer.2020.120187 |
0.406 |
|
2020 |
Koutsakis G, Nellis GF, Ghandhi JB. Surface temperature of a multi-layer thermal barrier coated wall subject to an unsteady heat flux International Journal of Heat and Mass Transfer. 155: 119645. DOI: 10.1016/J.Ijheatmasstransfer.2020.119645 |
0.406 |
|
2020 |
Reznicek EP, Hinze JF, Rapp LM, Nellis GF, Anderson MH, Braun RJ. One-dimensional, transient modeling of a fixed-bed regenerator as a replacement for recuperators in supercritical CO2 power cycles Energy Conversion and Management. 218: 112921. DOI: 10.1016/J.Enconman.2020.112921 |
0.455 |
|
2019 |
Hinze J, Rapp L, Nellis G, Anderson M, Reznicek E, Braun R. Modeling and experimental testing of periodic flow regenerators for sCO2 cycles Applied Thermal Engineering. 147: 789-803. DOI: 10.1016/J.Applthermaleng.2018.10.110 |
0.495 |
|
2018 |
Zhou W, Pfotenhauer JM, Nellis GF. Linear adjustable inertance tubes for pulse tube cryocoolers International Journal of Refrigeration. 86: 56-61. DOI: 10.1016/J.Ijrefrig.2017.11.021 |
0.399 |
|
2018 |
Herrera C, Nellis G, Reindl D, Klein S, Tinjum JM, McDaniel A. Use of a fiber optic distributed temperature sensing system for thermal response testing of ground-coupled heat exchangers Geothermics. 71: 331-338. DOI: 10.1016/J.Geothermics.2017.10.002 |
0.389 |
|
2017 |
Leyde BP, Klein SA, Nellis GF, Skye H. Determination of Vertical Borehole and Geological Formation Properties using the Crossed Contour Method. Geothermics. 66: 174-182. PMID 28785125 DOI: 10.1016/J.Geothermics.2016.12.007 |
0.759 |
|
2017 |
Haertel JH, Nellis GF. A fully developed flow thermofluid model for topology optimization of 3D-printed air-cooled heat exchangers Applied Thermal Engineering. 119: 10-24. DOI: 10.1016/J.Applthermaleng.2017.03.030 |
0.448 |
|
2017 |
Hinze JF, Nellis GF, Anderson MH. Cost comparison of printed circuit heat exchanger to low cost periodic flow regenerator for use as recuperator in a s-CO2 Brayton cycle Applied Energy. 208: 1150-1161. DOI: 10.1016/J.Apenergy.2017.09.037 |
0.373 |
|
2016 |
Barraza RS, Schwartz FJ, Klein SA, Nellis GF, Reindl DT. Experimental facility to measure heat transfer and pressure drop of boiling zeotropic multi-component mixtures in a horizontal tube Science and Technology For the Built Environment. 22: 2-14. DOI: 10.1080/23744731.2015.1058675 |
0.464 |
|
2016 |
Barraza R, Nellis G, Klein S, Reindl D. Measured and predicted frictional pressure drop for boiling zeotropic mixed refrigerants in horizontal tubes International Journal of Heat and Mass Transfer. 98: 285-298. DOI: 10.1016/J.Ijheatmasstransfer.2016.03.010 |
0.372 |
|
2016 |
Barraza R, Nellis G, Klein S, Reindl D. Measured and predicted heat transfer coefficients for boiling zeotropic mixed refrigerants in horizontal tubes International Journal of Heat and Mass Transfer. 97: 683-695. DOI: 10.1016/J.Ijheatmasstransfer.2016.02.030 |
0.461 |
|
2015 |
Yuan H, Edlebeck J, Wolf M, Anderson M, Corradini M, Klein S, Nellis G. Simulation of Supercritical CO2 Flow Through Circular and Annular Orifice Journal of Nuclear Engineering and Radiation Science. 1. DOI: 10.1115/1.4029337 |
0.376 |
|
2015 |
Zhou WJ, Pfotenhauer JM, Nellis GF, Liu SY. Performance of an adjustable, threaded inertance tube Iop Conference Series: Materials Science and Engineering. 101. DOI: 10.1088/1757-899X/101/1/012184 |
0.637 |
|
2015 |
Hinze JF, Klein SA, Nellis GF. Thermodynamic optimization of mixed refrigerant Joule-Thomson systems constrained by heat transfer considerations Iop Conference Series: Materials Science and Engineering. 101. DOI: 10.1088/1757-899X/101/1/012133 |
0.304 |
|
2015 |
Barraza R, Nellis G, Klein S, Reindl D. Description and validation of the Little correlation for boiling zeotropic mixtures in horizontal tubes from cryogenic to room temperature Iop Conference Series: Materials Science and Engineering. 101. DOI: 10.1088/1757-899X/101/1/012132 |
0.373 |
|
2015 |
Barraza R, Nellis G, Klein S, Reindl D. Measurements of convection heat transfer coefficients for hydrocarbon mixtures during boiling in a heated horizontal pipe from 100 K to room temperature Physics Procedia. 67: 557-562. DOI: 10.1016/J.Phpro.2015.06.075 |
0.451 |
|
2014 |
Dyreby J, Klein S, Nellis G, Reindl D. Design considerations for supercritical carbon dioxide brayton cycles with recompression Journal of Engineering For Gas Turbines and Power. 136. DOI: 10.1115/1.4027936 |
0.444 |
|
2014 |
Edlebeck J, Nellis GF, Klein SA, Anderson MH, Wolf M. Measurements of the flow of supercritical carbon dioxide through short orifices Journal of Supercritical Fluids. 88: 17-25. DOI: 10.1016/J.Supflu.2014.01.008 |
0.362 |
|
2013 |
Nielsen KK, Nellis GF, Klein SA. Numerical modeling of the impact of regenerator housing on the determination of Nusselt numbers International Journal of Heat and Mass Transfer. 65: 552-560. DOI: 10.1016/J.Ijheatmasstransfer.2013.06.032 |
0.387 |
|
2012 |
Passow KL, Skye HM, Nellis GF, Klein SA. Experimental verification of a Precooled Mixed gas Joule-Thomson cryoprobe model Aip Conference Proceedings. 1434: 1198-1205. DOI: 10.1063/1.4707042 |
0.732 |
|
2012 |
Jahromi AE, Miller FK, Nellis GF. Modeling and development of a Superfluid Magnetic Pump with no moving parts Aip Conference Proceedings. 1434: 223-230. DOI: 10.1063/1.4706924 |
0.74 |
|
2012 |
Leachman J, Pfotenhauer J, Nellis G. Dynamic shear stress and heat transfer of solid hydrogen, deuterium, and neon Journal of Applied Physics. 111. DOI: 10.1063/1.3703566 |
0.703 |
|
2012 |
Mumanachit P, Reindl DT, Nellis GF. Comparative analysis of low temperature industrial refrigeration systems International Journal of Refrigeration. 35: 1208-1221. DOI: 10.1016/J.Ijrefrig.2012.02.009 |
0.37 |
|
2012 |
Skye HM, Passow KL, Nellis GF, Klein SA. Empirically tuned model for a precooled MGJT cryoprobe Cryogenics. 52: 590-603. DOI: 10.1016/J.Cryogenics.2012.08.004 |
0.799 |
|
2012 |
Pertzborn A, Nellis G, Klein S. Thermal storage properties of a hybrid ground source heat pump Ashrae Transactions. 118: 34-41. |
0.304 |
|
2011 |
Zhu W, Park JM, White MJ, Nellis GF, Gianchandani YB. Experimental evaluation of an adaptive Joule-Thomson cooling system including silicon-microfabricated heat exchanger and microvalve components. Journal of Vacuum Science & Technology. a, Vacuum, Surfaces, and Films : An Official Journal of the American Vacuum Society. 29: 21005-210056. PMID 21552354 DOI: 10.1116/1.3545917 |
0.407 |
|
2011 |
Pertzborn A, Hackel S, Nellis G, Klein S. Experimental validation of a ground heat exchanger model in a hybrid ground source heat pump Hvac and R Research. 17: 1101-1114. DOI: 10.1080/10789669.2011.604698 |
0.339 |
|
2011 |
Brenner JP, Nellis GF, Reindl DT. Design specifications for wet-bulb aspirator apparatus Hvac and R Research. 17: 646-659. DOI: 10.1080/10789669.2011.572221 |
0.345 |
|
2011 |
Skye HM, Klein SA, Nellis GF. Experimental apparatus for measuring the performance of a precooled mixed gas Joule Thomson cryoprobe Ashrae Transactions. 117: 356-363. |
0.727 |
|
2010 |
White MJ, Nellis GF, Kelin SA, Zhu W, Gianchandani Y. An Experimentally Validated Numerical Modeling Technique for Perforated Plate Heat Exchangers. Journal of Heat Transfer. 132: 1-9. PMID 20976021 DOI: 10.1115/1.4000673 |
0.504 |
|
2010 |
Zhu W, White MJ, Nellis GF, Klein SA, Gianchandani YB. A Si/Glass Bulk-Micromachined Cryogenic Heat Exchanger for High Heat Loads: Fabrication, Test, and Application Results. Journal of Microelectromechanical Systems : a Joint Ieee and Asme Publication On Microstructures, Microactuators, Microsensors, and Microsystems. 19: 38-47. PMID 20490284 DOI: 10.1109/Jmems.2009.2034322 |
0.406 |
|
2010 |
White MJ, Nellis GF, Klein SA, Zhu W, Gianchandani Y. An experimentally validated numerical modeling technique for perforated plate heat exchangers Journal of Heat Transfer. 132. DOI: 10.1115/1.4000673 |
0.305 |
|
2010 |
Leachman JW, Pfotenhauer JM, Nellis GF, Steiner TJ. A cryogenic couette viscometer to measure dissipation and heat transfer during solidification Aip Conference Proceedings. 1218: 329-336. DOI: 10.1063/1.3422371 |
0.79 |
|
2010 |
Leachman JW, Pfotenhauer JM, Nellis GF. Modeling of a hydrogenic pellet production system Aip Conference Proceedings. 1218: 1570-1577. DOI: 10.1063/1.3422338 |
0.787 |
|
2010 |
Jensen JB, Engelbrecht K, Bahl CRH, Pryds N, Nellis GF, Klein SA, Elmegaard B. Modeling of parallel-plate regenerators with non-uniform plate distributions International Journal of Heat and Mass Transfer. 53: 5065-5072. DOI: 10.1016/J.Ijheatmasstransfer.2010.07.058 |
0.573 |
|
2009 |
Park JM, Evans AT, Rasmussen K, Brosten TR, Nellis GF, Klein SA, Gianchandani YB. A microvalve with integrated sensors and customizable normal state for low-temperature operation Journal of Microelectromechanical Systems. 18: 868-877. DOI: 10.1109/Jmems.2009.2021097 |
0.333 |
|
2008 |
Park JM, Taylor RP, Evans AT, Brosten TR, Nellis GF, Klein SA, Feller JR, Salerno L, Gianchandani YB. A piezoelectric microvalve for cryogenic applications Journal of Micromechanics and Microengineering. 18. DOI: 10.1088/0960-1317/18/1/015023 |
0.351 |
|
2008 |
Skye HM, Nellis GF, Klein SA. Automatic distributed load temperature control strategies for a rectified continuous flow loop interfaced with a pulse tube cryocooler Aip Conference Proceedings. 985: 1683-1690. DOI: 10.1063/1.2908537 |
0.735 |
|
2008 |
Aljuwayhel NF, Reindl DT, Klein SA, Nellis GF. Experimental investigation of the performance of industrial evaporator coils operating under frosting conditions International Journal of Refrigeration. 31: 98-106. DOI: 10.1016/J.Ijrefrig.2007.05.010 |
0.395 |
|
2008 |
Feller JR, Salerno LJ, Kashani A, Helvensteijn BPM, Maddocks JR, Nellis GF, Gianchandani YB. Technologies for cooling of large distributed loads Space 2008 Conference. |
0.338 |
|
2007 |
Kashani A, Maddocks JR, Nellis GF, Gianchandani YB. Technologies for cooling of large distributed and deployable loads Proceedings of Spie - the International Society For Optical Engineering. 6678. DOI: 10.1117/12.734351 |
0.403 |
|
2007 |
Dyreby JJ, Turner KT, Nellis GF. Simulating droplet dynamics during evaporation-driven self-assembly Proceedings of Spie - the International Society For Optical Engineering. 6517. DOI: 10.1117/12.720620 |
0.312 |
|
2007 |
Schuetter SD, Shedd TA, Nellis GF. Prediction of the velocity at which liquid separates from a moving contact line Journal of Micro/Nanolithography, Mems, and Moems. 6. DOI: 10.1117/1.2727490 |
0.307 |
|
2007 |
Aljuwayhel NF, Reindl DT, Klein SA, Nellis GF. Comparison of parallel- and counter-flow circuiting in an industrial evaporator under frosting conditions International Journal of Refrigeration. 30: 1347-1357. DOI: 10.1016/J.Ijrefrig.2007.04.009 |
0.374 |
|
2007 |
Lachner BF, Nellis GF, Reindl DT. The commercial feasibility of the use of water vapor as a refrigerant International Journal of Refrigeration. 30: 699-708. DOI: 10.1016/J.Ijrefrig.2006.09.009 |
0.314 |
|
2007 |
Brosten TR, Park JM, Evans AT, Rasmussen K, Nellis GF, Klein SA, Feller JR, Salerno L, Gianchandani YB. A numerical flow model and experimental results of a cryogenic micro-valve for distributed cooling applications Cryogenics. 47: 501-509. DOI: 10.1016/J.Cryogenics.2007.06.002 |
0.4 |
|
2007 |
Engelbrecht KL, Nellis GF, Klein SA, Zimm CB. Recent developments in room temperature active magnetic regenerative refrigeration Hvac and R Research. 13: 525-542. |
0.518 |
|
2006 |
Burnett HB, Wei AC, El-Morsi MS, Shedd TA, Nellis GF, Van Peski C, Grenville A. Modeling and experimental investigation of bubble entrapment for flow over topography during immersion lithography Journal of Microlithography, Microfabrication and Microsystems. 5. DOI: 10.1117/1.2158818 |
0.361 |
|
2006 |
Engelbrecht KL, Nellis GF, Klein SA. The effect of internal temperature gradients on regenerator matrix performance Journal of Heat Transfer. 128: 1060-1069. DOI: 10.1115/1.2345428 |
0.666 |
|
2006 |
Skye HM, Hoch DW, Nellis GF, Maddocks JR, Klein SA, Roberts T, Davis T. Rectified continuous flow loop for the thermal management of large structures Aip Conference Proceedings. 823: 1809-1816. DOI: 10.1063/1.2202610 |
0.718 |
|
2006 |
Shi JL, Pfotenhauer JM, Nellis GF. Design model for a two-stage pulse tube cryocooler Aip Conference Proceedings. 823: 329-336. DOI: 10.1063/1.2202432 |
0.68 |
|
2006 |
Radebaugh R, Lewis M, Luo E, Pfotenhauer JM, Nellis GF, Schunk LA. Inertance tube optimization for pulse tube refrigerators Aip Conference Proceedings. 823: 59-67. DOI: 10.1063/1.2202401 |
0.698 |
|
2006 |
Potratz SA, Nellis GF, Maddocks JR, Kashani A, Helvensteijn BPM, Rhoads GL, Flake B. Development of a large-capacity, stirling-type, pulse-tube refrigerator Aip Conference Proceedings. 823: 3-10. DOI: 10.1063/1.2202394 |
0.315 |
|
2006 |
Fredrickson K, Nellis G, Klein S. A design method for mixed gas Joule-Thomson refrigeration cryosurgical probes International Journal of Refrigeration. 29: 700-715. DOI: 10.1016/J.Ijrefrig.2005.12.003 |
0.423 |
|
2006 |
Skye HM, Nellis GF, Klein SA. Comparison of CFD analysis to empirical data in a commercial vortex tube International Journal of Refrigeration. 29: 71-80. DOI: 10.1016/J.Ijrefrig.2005.05.004 |
0.781 |
|
2006 |
Nellis GF, Klein SA. Regenerative heat exchangers with significant entrained fluid heat capacity International Journal of Heat and Mass Transfer. 49: 329-340. DOI: 10.1016/J.Ijheatmasstransfer.2005.06.021 |
0.424 |
|
2006 |
Maytal BZ, Nellis GF, Klein SA, Pfotenhauer JM. Elevated-pressure mixed-coolants Joule-Thomson cryocooling Cryogenics. 46: 55-67. DOI: 10.1016/J.Cryogenics.2005.11.005 |
0.689 |
|
2006 |
Engelbrecht KL, Nellis GF, Klein SA. Predicting the performance of an active magnetic regenerator refrigerator used for space cooling and refrigeration Hvac and R Research. 12: 1077-1095. |
0.583 |
|
2005 |
Baek SY, Wei A, Cole DC, Nellis G, Yeung MS, Abdo AY, Engelstad RL, Rothschild M, Switkes M. Simulation of the coupled thermal/optical effects for liquid immersion nanolithography Journal of Microlithography, Microfabrication and Microsystems. 4: 1-10. DOI: 10.1117/1.1858331 |
0.389 |
|
2005 |
Burnett H, Shedd T, Nellis G, Van Peski C. Static and dynamic contact angles of water on photoresist Journal of Vacuum Science and Technology B: Microelectronics and Nanometer Structures. 23: 2721-2727. DOI: 10.1116/1.2131878 |
0.307 |
|
2005 |
El-Morsi M, Nellis G, Schuetter S, Van Peski C, Grenville A. Full wafer simulation of immersion fluid heating Journal of Vacuum Science and Technology B: Microelectronics and Nanometer Structures. 23: 2596-2600. DOI: 10.1116/1.2091091 |
0.419 |
|
2005 |
Burnett H, Shedd T, Nellis G, El-Morsi M, Engelstad R, Garoff S, Varanasi K. Control of the receding meniscus in immersion lithography Journal of Vacuum Science and Technology B: Microelectronics and Nanometer Structures. 23: 2611-2616. DOI: 10.1116/1.2090968 |
0.369 |
|
2005 |
Nellis GF, Pfotenhauer JM. Effectiveness-NTU relationship for a counterflow heat exchanger subjected to an external heat transfer Journal of Heat Transfer. 127: 1071-1073. DOI: 10.1115/1.2010496 |
0.688 |
|
2005 |
Schunk LO, Nellis GF, Pfotenhauer JM. Experimental investigation and modeling of inertance tubes Journal of Fluids Engineering, Transactions of the Asme. 127: 1029-1037. DOI: 10.1115/1.1989369 |
0.713 |
|
2005 |
Martens TJ, Nellis GF, Pfotenhauer JM, Jahns TM. Double-sided IPEM cooling using miniature heat pipes Ieee Transactions On Components and Packaging Technologies. 28: 852-861. DOI: 10.1109/Tcapt.2005.848591 |
0.716 |
|
2005 |
Aljuwayhel NF, Nellis GF, Klein SA. Parametric and internal study of the vortex tube using a CFD model International Journal of Refrigeration. 28: 442-450. DOI: 10.1016/J.Ijrefrig.2004.04.004 |
0.433 |
|
2005 |
Nellis G, Hughes C, Pfotenhauer J. Heat transfer coefficient measurements for mixed gas working fluids at cryogenic temperatures Cryogenics. 45: 546-556. DOI: 10.1016/J.Cryogenics.2005.05.002 |
0.481 |
|
2004 |
Nellis G, Wei A. Preliminary analysis of laser-pulse-induced pressure variation for immersion lithography Journal of Microlithography, Microfabrication and Microsystems. 3: 84-86. DOI: 10.1117/1.1636490 |
0.361 |
|
2004 |
Wei AC, Nellis GF, Abdo AY, Engelstad RL, Chen CF, Switkes M, Rothschild M. Microfluidic simulations for immersion lithography Journal of Microlithography, Microfabrication and Microsystems. 3: 28-34. DOI: 10.1117/1.1632500 |
0.378 |
|
2004 |
Abdo A, Schuetter S, Nellis G, Wei A, Engelstad R, Truskett V. Predicting the fluid behavior during the dispensing process for step-and-flash imprint lithography Journal of Vacuum Science and Technology B: Microelectronics and Nanometer Structures. 22: 3279-3282. DOI: 10.1116/1.1825016 |
0.33 |
|
2004 |
Schuetter SD, Dicks GA, Nellis GF, Engelstad RL, Lovell EG. Controlling imprint distortions in step-and-flash imprint lithography Journal of Vacuum Science and Technology B: Microelectronics and Nanometer Structures. 22: 3312-3317. DOI: 10.1116/1.1825011 |
0.407 |
|
2004 |
Abdo A, Nellis G, Wei A, El-Morsi M, Engelstad R, Brueck SRJ, Neumann A. Optimizing the fluid dispensing process for immersion lithography Journal of Vacuum Science and Technology B: Microelectronics and Nanometer Structures. 22: 3454-3458. DOI: 10.1116/1.1824065 |
0.356 |
|
2004 |
Wei A, Ei-Morsi M, Nellis G, Abdo A, Engelstad R. Predicting air entrainment due to topography during the filling and scanning process for immersion lithography Journal of Vacuum Science and Technology B: Microelectronics and Nanometer Structures. 22: 3444-3449. DOI: 10.1116/1.1808736 |
0.364 |
|
2004 |
Potratz SA, Maddocks JR, Nellis GF, Pfotenhauer JM. Design and test of 300W, 65K pulse tube American Society of Mechanical Engineers, Advanced Energy Systems Division (Publication) Aes. 44: 489-498. DOI: 10.1115/IMECE2004-60806 |
0.697 |
|
2004 |
Hughes CB, Nellis GF, Pfotenhauer JM. Measurement of heat transfer coefficients for non-azeotropic hydrocarbon mixtures at cryogenic temperatures American Society of Mechanical Engineers, Advanced Energy Systems Division (Publication) Aes. 44: 415-422. DOI: 10.1115/IMECE2004-60381 |
0.705 |
|
2004 |
Nellis GF, Pfotenhauer JM, Klein SA. Actively cooled current leads for superconducting electronics using mixed-gas joule-thomson refrigeration American Society of Mechanical Engineers, Advanced Energy Systems Division (Publication) Aes. 44: 339-346. DOI: 10.1115/IMECE2004-60284 |
0.67 |
|
2004 |
Keppler F, Nellis G, Klein SA. Optimization of the composition of a gas mixture in a Joule-Thomson cycle Hvac and R Research. 10: 213-230. DOI: 10.1080/10789669.2004.10391100 |
0.382 |
|
2004 |
Wei A, Abdo A, Nellis G, Engelstad RL, Chang J, Lovell EG, Beckman W. Modeling fluid thermomechanical response for immersion lithography scanning Microelectronic Engineering. 73: 29-34. DOI: 10.1016/J.Mee.2004.02.011 |
0.418 |
|
2003 |
Wei A, Abdo A, Nellis G, Engelstad R, Chang J, Lovell E, Beckman W. Simulating fluid flow characteristics during the scanning process for immersion lithography Journal of Vacuum Science and Technology B: Microelectronics and Nanometer Structures. 21: 2788-2793. DOI: 10.1116/1.1622939 |
0.384 |
|
2003 |
Evans JC, Nellis GF. Design and test of hydrostatic gas bearings for a hybrid cryogenic refrigerator American Society of Mechanical Engineers, Advanced Energy Systems Division (Publication) Aes. 43: 67-76. DOI: 10.1115/IMECE2003-43070 |
0.325 |
|
2003 |
Nellis GF. Effectiveness-NTU relations for heat exchangers with streams having significant kinetic energy variation Journal of Heat Transfer. 125: 377-387. DOI: 10.1115/1.1560154 |
0.429 |
|
2003 |
Nellis GF. A heat exchanger model that includes axial conduction, parasitic heat loads, and property variations Cryogenics. 43: 523-538. DOI: 10.1016/S0011-2275(03)00132-2 |
0.492 |
|
2003 |
Nellis GF, Maddocks JR. An isothermal model of a hybrid Stirling/reverse-Brayton cryocooler Cryogenics. 43: 31-43. DOI: 10.1016/S0011-2275(02)00153-4 |
0.415 |
|
Show low-probability matches. |