| Year |
Citation |
Score |
| 2020 |
Wu X, Wang Z, Yu Z, Liu S, Bunn JR, Kolbus L, Feng Z. Control of Weld Residual Stress in a Thin Steel Plate through Low Transformation Temperature Welding Consumables Welding Journal. 99. DOI: 10.29391/2020.99.012 |
0.367 |
|
| 2019 |
Gonzales DS, Liu S, Javernick D, Pacheco R, Brand M, Johnson M, Tung D. Oxygen Effects on Solidification Behavior of Gas Tungsten Arc–Welded Laser Powder Bed Fusion–Fabricated 304L Stainless Steel Materials Performance and Characterization. 8: 20180115. DOI: 10.1520/Mpc20180115 |
0.348 |
|
| 2019 |
Wei J, Madeni JC, Liu S, Nelson S, Xu R. Performance comparison of Al-Si-Ti and Co-Si-V-Ti braze alloys in the vacuum brazing of reaction-bonded silicon carbide Welding in the World. 63: 1851-1860. DOI: 10.1007/S40194-019-00796-Z |
0.35 |
|
| 2017 |
Park C, Kang N, Liu S. Effect of grain size on the resistance to hydrogen embrittlement of API 2W Grade 60 steels using in situ slow-strain-rate testing Corrosion Science. 128: 33-41. DOI: 10.1016/J.Corsci.2017.08.032 |
0.308 |
|
| 2017 |
Rodrigues F, Watson J, Liu S, Madeni JC. Study of intermetallic compounds (IMC) that form between indium-enriched SAC solder alloys and copper substrate Welding in the World. 61: 603-611. DOI: 10.1007/S40194-017-0445-X |
0.32 |
|
| 2017 |
Hawk C, Liu S, Kottilingam S. Effect of processing parameters on the microstructure and mechanical properties of wide-gap braze repairs on nickel-superalloy René 108 Welding in the World. 61: 391-404. DOI: 10.1007/S40194-016-0420-Y |
0.355 |
|
| 2016 |
Lee M, KanG N, Liu S, Cho K. Effects of inclusion size and acicular ferrite on cold cracking for high-strength steel welds of YS 600 MPa grade Science and Technology of Welding and Joining. 21: 711-719. DOI: 10.1080/13621718.2016.1178833 |
0.318 |
|
| 2014 |
Tate SB, Liu S. Solidification behaviour of laser welded type 21Cr-6Ni-9Mn stainless steel Science and Technology of Welding and Joining. 19: 310-317. DOI: 10.1179/1362171813Y.0000000189 |
0.356 |
|
| 2014 |
Rodriguez-Sanchez JE, Perez-Guerrero F, Liu S, Rodriguez-Castellanos A, Albiter-Hernandez A. Underwater repair of fatigue cracks by gas tungsten arc welding process Fatigue & Fracture of Engineering Materials & Structures. 37: 637-644. DOI: 10.1111/Ffe.12146 |
0.307 |
|
| 2014 |
Nelson SD, Liu S, Kottilingam S, Madeni JC. Spreading and solidification behavior of nickel wide-gap brazes: The characterization of braze alloys containing boron and silicon for the repair of nickel-based superalloy turbine components Welding in the World. 58: 593-600. DOI: 10.1007/S40194-014-0144-9 |
0.391 |
|
| 2013 |
DuPont JN, Babu S, Liu S. Welding of Materials for Energy Applications Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 44: 3385-3410. DOI: 10.1007/S11661-013-1643-9 |
0.342 |
|
| 2011 |
Almostaneer H, Cadigan C, Liu S, Olson DL, Richards R, Liang HJ. Hydrocarbon–metal reactions during metal arc welding under oil (MAW-UO) Science and Technology of Welding and Joining. 16: 619-629. DOI: 10.1179/1362171811Y.0000000051 |
0.349 |
|
| 2008 |
Darcis PP, Katsumoto H, Payares-Asprino MC, Liu S, Siewert TA. Cruciform fillet welded joint fatigue strength improvements by weld metal phase transformations Fatigue & Fracture of Engineering Materials & Structures. 31: 125-136. DOI: 10.1111/J.1460-2695.2007.01205.X |
0.37 |
|
| 2007 |
Díez FM, Liu S. Compositional boundary between primary austenitic and ferritic Mn-Cr and Ni-Cr steel weld metals Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 1-7. DOI: 10.1016/J.Msea.2006.11.108 |
0.383 |
|
| 2006 |
Pessoa ECP, Bracarense AQ, Zica EM, Liu S, Perez-Guerrero F. Porosity variation along multipass underwater wet welds and its influence on mechanical properties Journal of Materials Processing Technology. 179: 239-243. DOI: 10.1016/J.Jmatprotec.2006.03.071 |
0.374 |
|
| 2006 |
Bang K, Park C, Liu S. Effects of nitrogen content and weld cooling time on the simulated heat-affected zone toughness in a Ti-containing steel Journal of Materials Science. 41: 5994-6000. DOI: 10.1007/S10853-006-0498-5 |
0.381 |
|
| 2005 |
Steele JPH, Mnich C, Debrunner C, Vincent TL, Liu S. Development of closed‐loop control of robotic welding processes Industrial Robot-An International Journal. 32: 350-355. DOI: 10.1108/01439910510600236 |
0.301 |
|
| 2001 |
Rowe M, Liu S. Recent developments in underwater wet welding Science and Technology of Welding and Joining. 6: 387-396. DOI: 10.1179/Stw.2001.6.6.387 |
0.414 |
|
| 2001 |
Marya M, Liu S. Search for filler metal for welding of ferrous alloys to titanium Science and Technology of Welding and Joining. 6: 240-246. DOI: 10.1179/136217101101538839 |
0.423 |
|
| 2001 |
Bauné E, Bonnet C, Liu S. Assessing metal transfer stability and spatter severity in flux cored arc welding Science and Technology of Welding and Joining. 6: 139-148. DOI: 10.1179/136217101101538677 |
0.302 |
|
| 1998 |
Medeiros RCd, Liu S. A Predictive Electrochemical Model for Weld Metal Hydrogen Pickup in Underwater Wet Welds Journal of Offshore Mechanics and Arctic Engineering-Transactions of the Asme. 120: 243-248. DOI: 10.1115/1.2829547 |
0.374 |
|
| 1998 |
Liu S, Liao F. Precipitate stability in the heat affected zone of nitrogen-enhanced high strength low alloy steels Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 244: 273-283. DOI: 10.1016/S0921-5093(97)00550-9 |
0.373 |
|
| 1997 |
Meier A, Chidambaram P, Edwards GR, Liu S. Nucleation and growth kinetics of reaction-product formation for copper–titanium and silver–titanium alloys on alumina Journal of Materials Science. 32: 5215-5223. DOI: 10.1023/A:1018642122517 |
0.309 |
|
| 1996 |
Pope AM, Teixeira JCG, Santos VRd, Paes MTP, Liu S. The Effect of Nickel on the Mechanical Properties of High-Oxygen Underwater Wet Welds Journal of Offshore Mechanics and Arctic Engineering-Transactions of the Asme. 118: 165-168. DOI: 10.1115/1.2828827 |
0.339 |
|
| 1996 |
Osio AS, Liu S, Olson DL. The effect of solidification on the formation and growth of inclusions in low carbon steel welds Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 221: 122-133. DOI: 10.1016/S0921-5093(96)10466-4 |
0.369 |
|
| 1996 |
Ramirez JE, Liu S, Olson DL. Dual precipitation strengthening effect of copper and niobium in high strength steel weld metal Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 216: 91-103. DOI: 10.1016/0921-5093(96)10398-1 |
0.408 |
|
| 1995 |
Sanchez-Osio A, Liu S, Olson DL, Ibarra S. Designing Shielded Metal Arc Consumables for Underwater Wet Welding in Offshore Applications Journal of Offshore Mechanics and Arctic Engineering-Transactions of the Asme. 117: 212-220. DOI: 10.1115/1.2827092 |
0.413 |
|
| 1990 |
Bunnell DE, Liu S, Olson DL. Low hydrogen SMAW electrode moisture content determination using electrical capacitance Journal of Materials Engineering. 12: 159-165. DOI: 10.1007/Bf02834069 |
0.304 |
|
| 1987 |
Liu S, Olson DL. The influence of inclusion chemical composition on weld metal microstructure Journal of Materials Engineering. 9: 237-251. DOI: 10.1007/Bf02834144 |
0.413 |
|
| Show low-probability matches. |
