Year |
Citation |
Score |
2023 |
Barcenas L, Narayana SS, Khoun L, Trudeau P, Hubert P. Thermochemical and rheological characterization of highly reactive thermoset resins for liquid moulding. Journal of Composite Materials. 57: 3013-3024. PMID 37476662 DOI: 10.1177/00219983231181640 |
0.314 |
|
2020 |
Harvey D, Hubert P. Extensions of the Coating Approach for Topology Optimization of Composite Sandwich Structures Composite Structures. 252: 112682. DOI: 10.1016/J.Compstruct.2020.112682 |
0.353 |
|
2020 |
Smith A, Endruweit A, Choong G, De Focatiis D, Hubert P. Adaptation of material deposition parameters to account for out-time effects on prepreg tack Composites Part a: Applied Science and Manufacturing. 133: 105835. DOI: 10.1016/J.Compositesa.2020.105835 |
0.366 |
|
2020 |
Krumenacker N, Madra A, Hubert P. Image-based characterization of fibre waviness in a representative vacuum-bagged corner laminate Composites Part a: Applied Science and Manufacturing. 131: 105774. DOI: 10.1016/J.Compositesa.2020.105774 |
0.329 |
|
2019 |
Visweswaraiah SB, Lessard L, Hubert P. Tensile behaviour of hybrid fibre architectures of randomly oriented strands combined with laminate groups Journal of Composite Materials. 53: 3725-3740. DOI: 10.1177/0021998319844590 |
0.356 |
|
2019 |
Landry B, Hubert P. Process modelling of discontinuous long fibre carbon/polyether ether ketone composites: Defect prediction Journal of Composite Materials. 53: 2505-2515. DOI: 10.1177/0021998319831757 |
0.434 |
|
2019 |
Levy A, Hubert P. Vacuum-bagged composite laminate forming processes: Predicting thickness deviation in complex shapes Composites Part a-Applied Science and Manufacturing. 126: 105568. DOI: 10.1016/J.Compositesa.2019.105568 |
0.425 |
|
2018 |
Visweswaraiah SB, Selezneva M, Lessard L, Hubert P. Mechanical characterisation and modelling of randomly oriented strand architecture and their hybrids – A general review Journal of Reinforced Plastics and Composites. 37: 548-580. DOI: 10.1177/0731684418754360 |
0.387 |
|
2018 |
Préau M, Hubert P. Effects of processing conditions on bondline void formation in vacuum bag only adhesive bonding: Modelling, validation and guidelines International Journal of Adhesion and Adhesives. 80: 43-51. DOI: 10.1016/J.Ijadhadh.2017.10.004 |
0.332 |
|
2018 |
Yourdkhani M, Liu W, Baril-Gosselin S, Robitaille F, Hubert P. Carbon nanotube-reinforced carbon fibre-epoxy composites manufactured by resin film infusion Composites Science and Technology. 166: 169-175. DOI: 10.1016/J.Compscitech.2018.01.006 |
0.459 |
|
2018 |
Batista NL, Helal E, Kurusu RS, Moghimian N, David E, Demarquette NR, Hubert P. Mass‐produced graphene—HDPE nanocomposites: Thermal, rheological, electrical, and mechanical properties Polymer Engineering & Science. 59: 675-682. DOI: 10.1002/Pen.24981 |
0.303 |
|
2017 |
Visweswaraiah SB, Ohlmann N, Lessard L, Hubert P. Flow-control and hybridization strategies for thermoplastic stiffened panels of long discontinuous fibers Journal of Reinforced Plastics and Composites. 36: 1327-1342. DOI: 10.1177/0731684417707585 |
0.324 |
|
2017 |
Weiland J, Hubert P, Hinterhölzl R. Thermal dimensioning of manufacturing moulds with multiple resistively heated zones for composite processing Journal of Composite Materials. 51: 3969-3986. DOI: 10.1177/0021998317695422 |
0.368 |
|
2017 |
Visweswaraiah SB, Lessard L, Hubert P. Interlaminar shear behaviour of hybrid fibre architectures of randomly oriented strands combined with laminate groups Composite Structures. 176: 823-832. DOI: 10.1016/J.Compstruct.2017.06.002 |
0.35 |
|
2016 |
Sherafat MH, Quaegebeur N, Hubert P, Lessard L, Masson P. Finite element modeling of Lamb wave propagation in composite stepped joints Journal of Reinforced Plastics and Composites. 35: 796-806. DOI: 10.1177/0731684416629763 |
0.337 |
|
2016 |
Helmus R, Centea T, Hubert P, Hinterhölzl R. Out-of-autoclave prepreg consolidation: Coupled air evacuation and prepreg impregnation modeling Journal of Composite Materials. 50: 1403-1413. DOI: 10.1177/0021998315592005 |
0.392 |
|
2016 |
Sherafat MH, Guitel R, Quaegebeur N, Hubert P, Lessard L, Masson P. Structural health monitoring of a composite skin-stringer assembly using within-the-bond strategy of guided wave propagation Materials and Design. 90: 787-794. DOI: 10.1016/J.Matdes.2015.11.018 |
0.32 |
|
2016 |
Sherafat MH, Guitel R, Quaegebeur N, Lessard L, Hubert P, Masson P. Guided wave scattering behavior in composite bonded assemblies Composite Structures. 136: 696-705. DOI: 10.1016/J.Compstruct.2015.10.046 |
0.333 |
|
2016 |
Cuinat-Guerraz N, Dumont MJ, Hubert P. Environmental resistance of flax/bio-based epoxy and flax/polyurethane composites manufactured by resin transfer moulding Composites Part a: Applied Science and Manufacturing. 88: 140-147. DOI: 10.1016/J.Compositesa.2016.05.018 |
0.433 |
|
2016 |
Préau M, Hubert P. Processing of co-bonded scarf repairs: Void reduction strategies and influence on strength recovery Composites Part a: Applied Science and Manufacturing. 84: 336-345. DOI: 10.1016/J.Compositesa.2016.01.016 |
0.364 |
|
2016 |
Picher-Martel GP, Levy A, Hubert P. Compression moulding of Carbon/PEEK Randomly-Oriented Strands composites: A 2D Finite Element model to predict the squeeze flow behaviour Composites Part a: Applied Science and Manufacturing. 81: 69-77. DOI: 10.1016/J.Compositesa.2015.11.006 |
0.417 |
|
2016 |
Smith AW, Hubert P. Recycling of uncured prepreg waste via long discontinuous fibre compression moulding: A study of flow phenomena interaction International Sampe Technical Conference. 2016. |
0.308 |
|
2015 |
LeBlanc D, Landry B, Levy A, Hubert P, Roy S, Yousefpour A, Quinlan E. Study of processing conditions on the forming of ribbed features using randomly oriented strands thermoplastic composites Journal of the American Helicopter Society. 60: 011005. DOI: 10.4050/Jahs.60.011005 |
0.408 |
|
2015 |
Sherafat M, Guitel R, Quaegebeur N, Lessard L, Hubert P, Masson P. Characterization of Guided Waves Propagation in a Composite Skin-stringer Assembly Structural Health Monitoring-An International Journal. DOI: 10.12783/Shm2015/227 |
0.334 |
|
2015 |
Dubé M, Chazerain A, Hubert P, Yousefpour A, Bersee HE. Characterization of resistance-welded thermoplastic composite double-lap joints under static and fatigue loading Journal of Thermoplastic Composite Materials. 28: 762-776. DOI: 10.1177/0892705713490714 |
0.337 |
|
2015 |
Brodusch N, Yourdkhani M, Hubert P, Gauvin R. Efficient cross-section preparation method for high-resolution imaging of hard polymer composites with a scanning electron microscope Journal of Microscopy. 260: 117-124. DOI: 10.1111/Jmi.12273 |
0.358 |
|
2015 |
Yamanaka T, Ghiasi H, Heidari-Rarani M, Lessard L, Feret V, Hubert P. Multiscale finite element analysis of mode I delamination growth in a fabric composite Composite Structures. 133: 157-165. DOI: 10.1016/J.Compstruct.2015.07.094 |
0.386 |
|
2015 |
Landry B, Hubert P. Experimental study of defect formation during processing of randomly-oriented strand carbon/PEEK composites Composites Part a: Applied Science and Manufacturing. 77: 301-309. DOI: 10.1016/J.Compositesa.2015.05.020 |
0.433 |
|
2015 |
Helmus R, Hinterhölzl R, Hubert P. A stochastic approach to model material variation determining tow impregnation in out-of-autoclave prepreg consolidation Composites Part a: Applied Science and Manufacturing. 77: 293-300. DOI: 10.1016/J.Compositesa.2015.03.021 |
0.325 |
|
2015 |
Kratz J, Hubert P. Vacuum-bag-only co-bonding prepreg skins to aramid honeycomb core. Part II. In-situ core pressure response using embedded sensors Composites Part a: Applied Science and Manufacturing. 72: 219-227. DOI: 10.1016/J.Compositesa.2014.11.030 |
0.303 |
|
2015 |
Kratz J, Hubert P. Vacuum bag only co-bonding prepreg skins to aramid honeycomb core. Part I. Model and material properties for core pressure during processing Composites Part a: Applied Science and Manufacturing. 72: 228-238. DOI: 10.1016/J.Compositesa.2014.11.026 |
0.365 |
|
2015 |
Levy A, Hubert P. Interstrand void content evolution in compression moulding of randomly oriented strands (ROS) of thermoplastic composites Composites Part a: Applied Science and Manufacturing. 70: 121-131. DOI: 10.1016/J.Compositesa.2014.11.017 |
0.448 |
|
2015 |
Yourdkhani M, Hubert P. A systematic study on dispersion stability of carbon nanotube-modified epoxy resins Carbon. 81: 251-259. DOI: 10.1016/J.Carbon.2014.09.056 |
0.412 |
|
2015 |
Phillips S, Kuo PY, Demaria C, Lessard L, Sain M, Hubert P. Effect of Common Chemical Treatments on the Process Kinetics and Mechanical Properties of Flax/Epoxy Composites Manufactured by Resin Infusion Journal of Polymers and the Environment. 23: 143-155. DOI: 10.1007/S10924-015-0709-8 |
0.413 |
|
2015 |
Picher-Martel GP, Levy A, Hubert P. Compression molding of Carbon/Polyether ether ketone composites: Squeeze flow behavior of unidirectional and randomly oriented strands Polymer Composites. DOI: 10.1002/Pc.23753 |
0.386 |
|
2015 |
Demaria C, Hubert P, Legay P, Mouret L, Dube R, Trudel C, Divialle A. Development of a composite landing gear component manufactured by SQRTM Camx 2015 - Composites and Advanced Materials Expo. 2817-2830. |
0.337 |
|
2014 |
Cattin C, Hubert P. Piezoresistance in polymer nanocomposites with high aspect ratio particles. Acs Applied Materials & Interfaces. 6: 1804-11. PMID 24410147 DOI: 10.1021/Am404808U |
0.316 |
|
2014 |
Demaria C, Paźsdzior P, Johnston A, Djokic D, Hubert P. Development of residual stresses during electron beam processing Journal of Strain Analysis For Engineering Design. 49: 179-189. DOI: 10.1177/0309324713515467 |
0.312 |
|
2014 |
Centea T, Hubert P. Out-of-autoclave prepreg consolidation under deficient pressure conditions Journal of Composite Materials. 48: 2033-2045. DOI: 10.1177/0021998313494101 |
0.378 |
|
2014 |
Mirjalili V, Ramachandramoorthy R, Hubert P. Enhancement of fracture toughness of carbon fiber laminated composites using multi wall carbon nanotubes Carbon. DOI: 10.1016/J.Carbon.2014.07.084 |
0.406 |
|
2014 |
Levy A, Stadlin J, Hubert P. Corner consolidation in vacuum bag only processing of out-of-autoclave composite prepregs laminates International Sampe Technical Conference. |
0.311 |
|
2013 |
Ashrafi B, Martinez-Rubi Y, Khoun L, Yourdkhani M, Kingston CT, Hubert P, Simard B, Johnston A. Influence of the reaction stoichiometry on the mechanical and thermal properties of SWCNT-modified epoxy composites. Nanotechnology. 24: 265701. PMID 23732221 DOI: 10.1088/0957-4484/24/26/265701 |
0.45 |
|
2013 |
Yourdkhani M, Hubert P. Quantitative dispersion analysis of inclusions in polymer composites. Acs Applied Materials & Interfaces. 5: 35-41. PMID 23113468 DOI: 10.1021/Am301459Q |
0.321 |
|
2013 |
Talbot E, Hubert P, Dubé M, Yousefpour A. Optimization of thermoplastic composites resistance welding parameters based on transient heat transfer finite element modeling Journal of Thermoplastic Composite Materials. 26: 699-717. DOI: 10.1177/0892705711428657 |
0.339 |
|
2013 |
Phillips S, Baets J, Lessard L, Hubert P, Verpoest I. Characterization of flax/epoxy prepregs before and after cure Journal of Reinforced Plastics and Composites. 32: 777-785. DOI: 10.1177/0731684412473359 |
0.406 |
|
2013 |
Kratz J, Hsiao K, Fernlund G, Hubert P. Thermal models for MTM45-1 and Cycom 5320 out-of-autoclave prepreg resins Journal of Composite Materials. 47: 341-352. DOI: 10.1177/0021998312440131 |
0.382 |
|
2013 |
Foroutan R, Nemes J, Ghiasi H, Hubert P. Experimental investigation of high strain-rate behaviour of fabric composites Composite Structures. 106: 264-269. DOI: 10.1016/J.Compstruct.2013.06.014 |
0.377 |
|
2013 |
Yourdkhani M, Mousavand T, Chapleau N, Hubert P. Thermal, oxygen barrier and mechanical properties of polylactide-organoclay nanocomposites Composites Science and Technology. 82: 47-53. DOI: 10.1016/J.Compscitech.2013.03.015 |
0.375 |
|
2013 |
Kratz J, Hubert P. Anisotropic air permeability in out-of-autoclave prepregs: Effect on honeycomb panel evacuation prior to cure Composites Part a: Applied Science and Manufacturing. 49: 179-191. DOI: 10.1016/J.Compositesa.2013.02.013 |
0.309 |
|
2013 |
Grunenfelder LK, Centea T, Hubert P, Nutt SR. Effect of room-temperature out-time on tow impregnation in an out-of-autoclave prepreg Composites Part a: Applied Science and Manufacturing. 45: 119-126. DOI: 10.1016/J.Compositesa.2012.10.001 |
0.378 |
|
2013 |
Feret V, Ghiasi H, Hubert P. Effect of fibre volume fraction on mixed-mode fracture of a fabric carbon/epoxy composite Applied Composite Materials. 20: 415-429. DOI: 10.1007/S10443-012-9276-5 |
0.332 |
|
2013 |
Palardy G, Trudel-Boucher D, Hubert P. Investigation of a postprocessing method to tailor the mechanical properties of carbon nanotube/polyamide fibers Journal of Applied Polymer Science. 130: 4375-4382. DOI: 10.1002/App.39713 |
0.678 |
|
2012 |
Mirjalili V, Yourdkhani M, Hubert P. Dispersion stability in carbon nanotube modified polymers and its effect on the fracture toughness. Nanotechnology. 23: 315701. PMID 22797331 DOI: 10.1088/0957-4484/23/31/315701 |
0.393 |
|
2012 |
Martinez-Rubi Y, Gonzalez-Dominguez JM, Ansón-Casaos A, Kingston CT, Daroszewska M, Barnes M, Hubert P, Cattin C, Martinez MT, Simard B. Tailored SWCNT functionalization optimized for compatibility with epoxy matrices. Nanotechnology. 23: 285701. PMID 22717547 DOI: 10.1088/0957-4484/23/28/285701 |
0.394 |
|
2012 |
Rahmat M, Hubert P. Molecular Dynamics Simulation of Single-Walled Carbon Nanotube – PMMA Interaction Journal of Nano Research. 117-128. DOI: 10.4028/Www.Scientific.Net/Jnanor.18-19.117 |
0.377 |
|
2012 |
Cattin C, Hubert P. Network Formation and Electrical Conduction in Carbon Nanotube Modified Polydimethylsiloxane Mrs Proceedings. 1410. DOI: 10.1557/Opl.2012.856 |
0.329 |
|
2012 |
Khoun L, Challagulla K, Hubert P. Thermo-mechanical properties of 5-harness satin fabric composites Journal of Composite Materials. 46: 3121-3136. DOI: 10.1177/0021998312436990 |
0.445 |
|
2012 |
Rahmat M, Ghiasi H, Hubert P. Interaction energy and polymer density profile in nanocomposites: a coarse grain simulation based on interaction stress Polymer Chemistry. 3: 1158. DOI: 10.1039/C2Py00532H |
0.34 |
|
2012 |
Palardy G, Hubert P, Ruiz E, Haider M, Lessard L. Numerical simulations for class A surface finish in resin transfer moulding process Composites Part B: Engineering. 43: 819-824. DOI: 10.1016/J.Compositesb.2011.06.002 |
0.674 |
|
2012 |
Centea T, Hubert P. Modelling the effect of material properties and process parameters on tow impregnation in out-of-autoclave prepregs Composites Part a: Applied Science and Manufacturing. 43: 1505-1513. DOI: 10.1016/J.Compositesa.2012.03.028 |
0.402 |
|
2011 |
Rahmat M, Das K, Hubert P. Interaction stresses in carbon nanotube-polymer nanocomposites. Acs Applied Materials & Interfaces. 3: 3425-31. PMID 21805984 DOI: 10.1021/Am200652F |
0.34 |
|
2011 |
Martinez-Rubi Y, Ashrafi B, Guan J, Kingston C, Johnston A, Simard B, Mirjalili V, Hubert P, Deng L, Young RJ. Toughening of epoxy matrices with reduced single-walled carbon nanotubes. Acs Applied Materials & Interfaces. 3: 2309-17. PMID 21612292 DOI: 10.1021/Am200523Z |
0.391 |
|
2011 |
Khoun L, Chaudhuri RI, Hubert P. Effect of low-profile additives on thermo-mechanical properties of glass fiber-reinforced unsaturated polyester composites Journal of Reinforced Plastics and Composites. 30: 815-823. DOI: 10.1177/0731684411412643 |
0.419 |
|
2011 |
Rahmat M, Hubert P. Carbon nanotube–polymer interactions in nanocomposites: A review Composites Science and Technology. 72: 72-84. DOI: 10.1016/J.Compscitech.2011.10.002 |
0.367 |
|
2011 |
Ashrafi B, Guan J, Mirjalili V, Zhang Y, Chun L, Hubert P, Simard B, Kingston CT, Bourne O, Johnston A. Enhancement of mechanical performance of epoxy/carbon fiber laminate composites using single-walled carbon nanotubes Composites Science and Technology. 71: 1569-1578. DOI: 10.1016/J.Compscitech.2011.06.015 |
0.398 |
|
2011 |
Centea T, Hubert P. Measuring the impregnation of an out-of-autoclave prepreg by micro-CT Composites Science and Technology. 71: 593-599. DOI: 10.1016/J.Compscitech.2010.12.009 |
0.356 |
|
2011 |
Kratz J, Hubert P. Processing out-of-autoclave honeycomb structures: Internal core pressure measurements Composites Part a: Applied Science and Manufacturing. 42: 1060-1065. DOI: 10.1016/J.Compositesa.2011.04.009 |
0.337 |
|
2011 |
Khoun L, Oliveira Rd, Michaud V, Hubert P. Investigation of process-induced strains development by fibre Bragg grating sensors in resin transfer moulded composites Composites Part a: Applied Science and Manufacturing. 42: 274-282. DOI: 10.1016/J.Compositesa.2010.11.013 |
0.355 |
|
2011 |
Khoun L, Palardy G, Hubert P. Relation between volumetric changes of unsaturated polyester resin and surface finish quality of fiberglass/unsaturated polyester composite panels Polymer Composites. 32: 1473-1480. DOI: 10.1002/Pc.21157 |
0.683 |
|
2010 |
Das K, Park C, Faive RL, Hubert P, Vengallatore S. Synthesis and characterization of nanocomposite thin films for MEMS applications Materials Research Society Symposium Proceedings. 1222: 99-104. DOI: 10.1557/Proc-1222-Dd05-06 |
0.426 |
|
2010 |
Mirjalili V, Hubert P. Modelling of the carbon nanotube bridging effect on the toughening of polymers and experimental verification Composites Science and Technology. 70: 1537-1543. DOI: 10.1016/J.Compscitech.2010.05.016 |
0.382 |
|
2010 |
Ashrafi B, Guan J, Mirjalili V, Hubert P, Simard B, Johnston A. Correlation between Young's modulus and impregnation quality of epoxy-impregnated SWCNT buckypaper Composites Part a: Applied Science and Manufacturing. 41: 1184-1191. DOI: 10.1016/J.Compositesa.2010.04.018 |
0.412 |
|
2010 |
Khoun L, Hubert P. Investigation of the dimensional stability of carbon epoxy cylinders manufactured by resin transfer moulding Composites Part a: Applied Science and Manufacturing. 41: 116-124. DOI: 10.1016/J.Compositesa.2009.06.014 |
0.444 |
|
2010 |
Rahmat M, Hubert P. Geometric optimization for a thermal microfluidic chip Journal of Mechanical Science and Technology. 24: 2143-2150. DOI: 10.1007/S12206-010-0710-Z |
0.302 |
|
2009 |
Khoun L, Centea T, Hubert P. Characterization Methodology of Thermoset Resins for the Processing of Composite Materials — Case Study: CYCOM 890RTM Epoxy Resin Journal of Composite Materials. 44: 1397-1415. DOI: 10.1177/0021998309353960 |
0.456 |
|
2009 |
DUBE M, HUBERT P, YOUSEFPOUR A, DENAULT J. Fatigue failure characterisation of resistance-welded thermoplastic composites skin/stringer joints International Journal of Fatigue. 31: 719-725. DOI: 10.1016/J.Ijfatigue.2008.03.012 |
0.308 |
|
2009 |
Hubert P, Ashrafi B, Adhikari K, Meredith J, Vengallatore S, Guan J, Simard B. Synthesis and characterization of carbon nanotube-reinforced epoxy: Correlation between viscosity and elastic modulus Composites Science and Technology. 69: 2274-2280. DOI: 10.1016/J.Compscitech.2009.04.023 |
0.422 |
|
2009 |
Khoun L, Hubert P. Cure shrinkage characterization of an epoxy resin system by two in situ measurement methods Polymer Composites. 31: 1603-1610. DOI: 10.1002/Pc.20949 |
0.394 |
|
2008 |
Dubé M, Hubert P, Gallet JN, Stavrov D, Bersee HE, Yousefpour A. Fatigue performance characterisation of resistance-welded thermoplastic composites Composites Science and Technology. 68: 1759-1765. DOI: 10.1016/J.Compscitech.2008.02.012 |
0.379 |
|
2008 |
Dubé M, Hubert P, Yousefpour A, Denault J. Current leakage prevention in resistance welding of carbon fibre reinforced thermoplastics Composites Science and Technology. 68: 1579-1587. DOI: 10.1016/J.Compscitech.2007.09.008 |
0.345 |
|
2008 |
Palardy G, Hubert P, Haider M, Lessard L. Optimization of RTM processing parameters for Class A surface finish Composites Part B: Engineering. 39: 1280-1286. DOI: 10.1016/J.Compositesb.2007.12.003 |
0.679 |
|
2007 |
Haider M, Hubert P, Lessard L. An experimental investigation of class A surface finish of composites made by the resin transfer molding process Composites Science and Technology. 67: 3176-3186. DOI: 10.1016/J.Compscitech.2007.04.010 |
0.398 |
|
2007 |
Dubé M, Hubert P, Yousefpour A, Denault J. Resistance welding of thermoplastic composites skin/stringer joints Composites Part a: Applied Science and Manufacturing. 38: 2541-2552. DOI: 10.1016/J.Compositesa.2007.07.014 |
0.35 |
|
2007 |
Haider M, Hubert P, Lessard L. Cure shrinkage characterization and modeling of a polyester resin containing low profile additives Composites Part a: Applied Science and Manufacturing. 38: 994-1009. DOI: 10.1016/J.Compositesa.2006.06.020 |
0.441 |
|
2006 |
Ashrafi B, Hubert P, Vengallatore S. Carbon nanotube-reinforced composites as structural materials for microactuators in microelectromechanical systems Nanotechnology. 17: 4895-4903. DOI: 10.1088/0957-4484/17/19/019 |
0.429 |
|
2006 |
Pipes RB, Hubert P, Salvetat JP, Zalamea L. Flexural deflection as a measure of van der Waals interaction forces in the CNT array Composites Science and Technology. 66: 1122-1128. DOI: 10.1016/J.Compscitech.2005.10.019 |
0.354 |
|
2006 |
ASHRAFI B, HUBERT P. Modeling the elastic properties of carbon nanotube array/polymer composites Composites Science and Technology. 66: 387-396. DOI: 10.1016/J.Compscitech.2005.07.020 |
0.432 |
|
2004 |
Odegard GM, Pipes RB, Hubert P. Comparison of two models of SWCN polymer composites Composites Science and Technology. 64: 1011-1020. DOI: 10.1016/J.Compscitech.2003.08.010 |
0.384 |
|
2003 |
Pipes RB, Hubert P. Scale effects in carbon nanostrutures: Self-similar analysis Nano Letters. 3: 239-243. DOI: 10.1021/Nl025889R |
0.366 |
|
2003 |
Pipes RB, Frankland SJV, Hubert P, Saether E. Self-consistent properties of carbon nanotubes and hexagonal arrays as composite reinforcements Composites Science and Technology. 63: 1349-1358. DOI: 10.1016/S0266-3538(03)00020-4 |
0.374 |
|
2002 |
Pipes RB, Hubert P. Helical carbon nanotube arrays: Thermal expansion Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. 4: 2528-2537. DOI: 10.1016/S0266-3538(03)00075-7 |
0.365 |
|
2002 |
Pipes RB, Hubert P. Helical carbon nanotube arrays: Mechanical properties Composites Science and Technology. 62: 419-428. DOI: 10.1016/S0266-3538(02)00002-7 |
0.375 |
|
2001 |
Hubert P, Poursartip A. Aspects of the Compaction of Composite Angle Laminates: An Experimental Investigation Journal of Composite Materials. 35: 2-26. DOI: 10.1177/002199801772661849 |
0.405 |
|
2001 |
Hubert P, Poursartip A. A method for the direct measurement of the fibre bed compaction curve of composite prepregs Composites Part a: Applied Science and Manufacturing. 32: 179-187. DOI: 10.1016/S1359-835X(00)00143-3 |
0.385 |
|
1999 |
Lynch K, Hubert P, Poursartip A. Use of a simple, inexpensive pressure sensor to measure hydrostatic resin pressure during processing of composite laminates Polymer Composites. 20: 581-593. DOI: 10.1002/Pc.10381 |
0.387 |
|
1999 |
Hubert P, Vaziri R, Poursartip A. A two-dimensional flow model for the process simulation of complex shape composite laminates International Journal For Numerical Methods in Engineering. 44: 1-26. DOI: 10.1002/(Sici)1097-0207(19990110)44:1<1::Aid-Nme481>3.0.Co;2-K |
0.416 |
|
1998 |
Hubert P, Poursartip A. A Review of Flow and Compaction Modelling Relevant to Thermoset Matrix Laminate Processing Journal of Reinforced Plastics and Composites. 17: 286-318. DOI: 10.1177/073168449801700402 |
0.38 |
|
1996 |
Johnston A, Hubert P, Fernlund G, Vaziri R, Poursartip A. Process Modeling of Composite Structures Employing a Virtual Autoclave Concept Science and Engineering of Composite Materials. 5. DOI: 10.1515/Secm.1996.5.3-4.235 |
0.374 |
|
Show low-probability matches. |