| Year |
Citation |
Score |
| 2017 |
Abdel-Salam MRH, Besant RW, Simonson CJ. Performance Definitions for Three-Fluid Heat and Moisture Exchangers Journal of Heat Transfer-Transactions of the Asme. 139: 22003. DOI: 10.1115/1.4034756 |
0.405 |
|
| 2017 |
Abdel-Salam MRH, Besant RW, Simonson CJ. Performance testing of 2-fluid and 3-fluid liquid-to-air membrane energy exchangers for HVAC applications in cold–dry climates International Journal of Heat and Mass Transfer. 106: 558-569. DOI: 10.1016/J.Ijheatmasstransfer.2016.09.024 |
0.459 |
|
| 2016 |
Kamali H, Ge G, Besant RW, Simonson CJ. Extension of the Concepts of Heat Capacity Rate Ratio and Effectiveness-Number of Transfer Units Model to the Coupled Heat and Moisture Exchange in Liquid-to-Air Membrane Energy Exchangers Journal of Heat Transfer. 138. DOI: 10.1115/1.4033418 |
0.471 |
|
| 2016 |
Fathieh F, Besant RW, Evitts RW, Simonson CJ. Effects of heat loss/gain on the transient testing of heat wheels Journal of Thermal Science and Engineering Applications. 8. DOI: 10.1115/1.4032762 |
0.444 |
|
| 2016 |
Ge G, Abdel-Salam AH, Abdel-Salam MRH, Besant RW, Simonson CJ. Heat and mass transfer performance comparison between a direct-contact liquid desiccant packed bed and a liquid-to-air membrane energy exchanger for air dehumidification Science and Technology For the Built Environment. 1-14. DOI: 10.1080/23744731.2016.1203712 |
0.482 |
|
| 2016 |
Fathieh F, Dehabadi L, Wilson LD, Besant RW, Evitts RW, Simonson CJ. Sorption Study of a Starch Biopolymer as an Alternative Desiccant for Energy Wheels Acs Sustainable Chemistry and Engineering. 4: 1262-1273. DOI: 10.1021/Acssuschemeng.5B01301 |
0.4 |
|
| 2016 |
Fathieh F, Rafati Nasr M, Sadeh S, Besant RW, Evitts RW, Müller J, Simonson CJ. Determination of air-to-air energy wheels latent effectiveness using humidity step test data International Journal of Heat and Mass Transfer. 103: 501-515. DOI: 10.1016/J.Ijheatmasstransfer.2016.07.046 |
0.411 |
|
| 2016 |
Abdel-Salam MRH, Besant RW, Simonson CJ. Performance testing of a novel 3-fluid liquid-to-air membrane energy exchanger (3-fluid LAMEE) under desiccant solution regeneration operating conditions International Journal of Heat and Mass Transfer. 95: 773-786. DOI: 10.1016/J.Ijheatmasstransfer.2015.10.065 |
0.467 |
|
| 2016 |
Abdel-Salam MRH, Besant RW, Simonson CJ. Design and testing of a novel 3-fluid liquid-to-air membrane energy exchanger (3-fluid LAMEE) International Journal of Heat and Mass Transfer. 92: 312-329. DOI: 10.1016/J.Ijheatmasstransfer.2015.08.075 |
0.44 |
|
| 2016 |
Rafati Nasr M, Fathieh F, Kadylak D, Huizing R, Besant RW, Simonson CJ. Experimental methods for detecting frosting in cross-flow air-to-air energy exchangers Experimental Thermal and Fluid Science. 77: 100-115. DOI: 10.1016/J.Expthermflusci.2016.04.009 |
0.47 |
|
| 2016 |
Naghash M, Fathieh F, Besant RW, Evitts RW, Simonson CJ. Measurement of convective heat transfer coefficients in a randomly packed bed of silica gel particles using IHTP analysis Applied Thermal Engineering. 106: 361-370. DOI: 10.1016/J.Applthermaleng.2016.06.027 |
0.468 |
|
| 2015 |
Mahmood GI, Simonson CJ, Besant RW. Experimental Pressure Drop and Heat Transfer in a Rectangular Channel with a Sinusoidal Porous Screen Journal of Heat Transfer. 137. DOI: 10.1115/1.4029349 |
0.406 |
|
| 2015 |
Vali A, Ge G, Besant RW, Simonson CJ. Numerical modeling of fluid flow and coupled heat and mass transfer in a counter-cross-flow parallel-plate liquid-to-air membrane energy exchanger International Journal of Heat and Mass Transfer. 89: 1258-1276. DOI: 10.1016/J.Ijheatmasstransfer.2015.06.043 |
0.487 |
|
| 2015 |
Fathieh F, Besant RW, Evitts RW, Simonson CJ. Determination of air-to-air heat wheel sensible effectiveness using temperature step change data International Journal of Heat and Mass Transfer. 87: 312-326. DOI: 10.1016/J.Ijheatmasstransfer.2015.04.028 |
0.506 |
|
| 2015 |
Abdel-Salam MRH, Besant RW, Simonson CJ. Sensitivity of the performance of a flat-plate liquid-to-air membrane energy exchanger (LAMEE) to the air and solution channel widths and flow maldistribution International Journal of Heat and Mass Transfer. 84: 1082-1100. DOI: 10.1016/J.Ijheatmasstransfer.2015.01.042 |
0.41 |
|
| 2015 |
Ghadiri Moghaddam D, Besant RW, Simonson CJ. A methodology for scaling a small-scale energy exchanger performance results to a full-scale energy exchanger International Journal of Heat and Mass Transfer. 82: 555-567. DOI: 10.1016/J.Ijheatmasstransfer.2014.11.040 |
0.374 |
|
| 2015 |
Nie X, Evitts RW, Besant RW, Kennell GF. Salt deposition at particle contact points Heat and Mass Transfer/Waerme- Und Stoffuebertragung. 51: 1287-1299. DOI: 10.1007/S00231-015-1494-6 |
0.654 |
|
| 2014 |
Abdel-Salam MRH, Ge G, Fauchoux M, Besant RW, Simonson CJ. State-of-the-art in liquid-to-air membrane energy exchangers (LAMEEs): A comprehensive review Renewable and Sustainable Energy Reviews. 39: 700-728. DOI: 10.1016/J.Rser.2014.07.022 |
0.452 |
|
| 2014 |
Rafati Nasr M, Fauchoux M, Besant RW, Simonson CJ. A review of frosting in air-to-air energy exchangers Renewable and Sustainable Energy Reviews. 30: 538-554. DOI: 10.1016/J.Rser.2013.10.038 |
0.493 |
|
| 2014 |
Ge G, Mahmood GI, Moghaddam DG, Simonson CJ, Besant RW, Hanson S, Erb B, Gibson PW. Material properties and measurements for semi-permeable membranes used in energy exchangers Journal of Membrane Science. 453: 328-336. DOI: 10.1016/J.Memsci.2013.11.013 |
0.384 |
|
| 2014 |
Ghadiri Moghaddam D, Fauchoux M, Besant RW, Simonson CJ. Investigating similarity between a small-scale liquid-to-air membrane energy exchanger (LAMEE) and a full-scale (100 L/s) LAMEE: Experimental and numerical results International Journal of Heat and Mass Transfer. 77: 464-474. DOI: 10.1016/J.Ijheatmasstransfer.2014.05.032 |
0.396 |
|
| 2014 |
Ge G, Ghadiri Moghaddam D, Abdel-Salam AH, Besant RW, Simonson CJ. Comparison of experimental data and a model for heat and mass transfer performance of a liquid-to-air membrane energy exchanger (LAMEE) when used for air dehumidification and salt solution regeneration International Journal of Heat and Mass Transfer. 68: 119-131. DOI: 10.1016/J.Ijheatmasstransfer.2013.09.016 |
0.475 |
|
| 2014 |
Patel H, Ge G, Abdel-Salam MRH, Abdel-Salam AH, Besant RW, Simonson CJ. Contaminant transfer in run-around membrane energy exchangers Energy and Buildings. 70: 94-105. DOI: 10.1016/J.Enbuild.2013.11.013 |
0.456 |
|
| 2014 |
Rasouli M, Akbari S, Simonson CJ, Besant RW. Energetic, economic and environmental analysis of a health-care facility HVAC system equipped with a run-around membrane energy exchanger Energy and Buildings. 69: 112-121. DOI: 10.1016/J.Enbuild.2013.06.036 |
0.48 |
|
| 2014 |
Abdel-Salam MRH, Fauchoux M, Ge G, Besant RW, Simonson CJ. Expected energy and economic benefits, and environmental impacts for liquid-to-air membrane energy exchangers (LAMEEs) in HVAC systems: A review Applied Energy. 127: 202-218. DOI: 10.1016/J.Apenergy.2014.04.004 |
0.369 |
|
| 2014 |
Ghadiri Moghaddam D, Besant RW, Simonson CJ. Solution-side effectiveness for a liquid-to-air membrane energy exchanger used as a dehumidifier/regenerator Applied Energy. 113: 872-882. DOI: 10.1016/J.Apenergy.2013.08.037 |
0.374 |
|
| 2013 |
Oghabi A, Moghaddam DG, Simonson C, Besant RW. Measurement of heat transfer enhancement and pressure drop across eddy promoter air screens in a liquid-to-air-membrane energy exchanger (LAMEE) Asme 2013 Heat Transfer Summer Conf. Collocated With the Asme 2013 7th Int. Conf. On Energy Sustainability and the Asme 2013 11th Int. Conf. On Fuel Cell Science, Engineering and Technology, Ht 2013. 2. DOI: 10.1115/HT2013-17252 |
0.378 |
|
| 2013 |
Moghaddam DG, Mahmood G, Ge G, Bolster J, Besant RW, Simonson CJ. Steady-state performance of a prototype (200 CFM) liquid-to-air membrane energy exchanger (LAMEE) under summer and winter test conditions Asme 2013 Heat Transfer Summer Conf. Collocated With the Asme 2013 7th Int. Conf. On Energy Sustainability and the Asme 2013 11th Int. Conf. On Fuel Cell Science, Engineering and Technology, Ht 2013. 1. DOI: 10.1115/HT2013-17135 |
0.355 |
|
| 2013 |
Moghaddam DG, Le Poudre P, Besant RW, Simonson CJ. Steady-state performance of a small-scale liquid-to-air membrane energy exchanger for different heat and mass transfer directions, and liquid desiccant types and concentrations: Experimental and numerical data Journal of Heat Transfer. 135. DOI: 10.1115/1.4024586 |
0.473 |
|
| 2013 |
Ge G, Abdel-Salam MRH, Besant RW, Simonson CJ. Research and applications of liquid-to-air membrane energy exchangers in building HVAC systems at University of Saskatchewan: A review Renewable and Sustainable Energy Reviews. 26: 464-479. DOI: 10.1016/J.Rser.2013.04.022 |
0.427 |
|
| 2013 |
Namvar R, Ge G, Simonson CJ, Besant RW. Transient heat and moisture transfer characteristics of a liquid-to-air membrane energy exchanger (LAMEE) model verification and extrapolation International Journal of Heat and Mass Transfer. 66: 757-771. DOI: 10.1016/J.Ijheatmasstransfer.2013.07.068 |
0.464 |
|
| 2013 |
Moghaddam DG, Lepoudre P, Ge G, Besant RW, Simonson CJ. Small-scale single-panel liquid-to-air membrane energy exchanger (LAMEE) test facility development, commissioning and evaluating the steady-state performance Energy and Buildings. 66: 424-436. DOI: 10.1016/J.Enbuild.2013.07.017 |
0.426 |
|
| 2013 |
Ge G, Ghadiri Moghaddam D, Namvar R, Simonson CJ, Besant RW. Analytical model based performance evaluation, sizing and coupling flow optimization of liquid desiccant run-around membrane energy exchanger systems Energy and Buildings. 62: 248-257. DOI: 10.1016/J.Enbuild.2013.03.017 |
0.471 |
|
| 2013 |
Ghadiri Moghaddam D, Oghabi A, Ge G, Besant RW, Simonson CJ. Numerical model of a small-scale liquid-to-air membrane energy exchanger: Parametric study of membrane resistance and air side convective heat transfer coefficient Applied Thermal Engineering. 61: 245-258. DOI: 10.1016/J.Applthermaleng.2013.07.017 |
0.505 |
|
| 2013 |
Rasouli M, Ge G, Simonson CJ, Besant RW. Uncertainties in energy and economic performance of HVAC systems and energy recovery ventilators due to uncertainties in building and HVAC parameters Applied Thermal Engineering. 50: 732-742. DOI: 10.1016/J.Applthermaleng.2012.08.021 |
0.372 |
|
| 2012 |
Namvar R, Pyra D, Ge G, Simonson CJ, Besant RW. +Transient characteristics of a liquid-to-air membrane energy exchanger (LAMEE) experimental data with correlations International Journal of Heat and Mass Transfer. 55: 6682-6694. DOI: 10.1016/J.Ijheatmasstransfer.2012.06.077 |
0.454 |
|
| 2012 |
Akbari S, Simonson CJ, Besant RW. Application of neural networks to predict the transient performance of a Run-Around Membrane Energy Exchanger for yearly non-stop operation International Journal of Heat and Mass Transfer. 55: 5403-5416. DOI: 10.1016/J.Ijheatmasstransfer.2012.04.033 |
0.432 |
|
| 2012 |
Akbari S, Hemingson HB, Beriault D, Simonson CJ, Besant RW. Application of neural networks to predict the steady state performance of a Run-Around Membrane Energy Exchanger International Journal of Heat and Mass Transfer. 55: 1628-1641. DOI: 10.1016/J.Ijheatmasstransfer.2011.11.019 |
0.464 |
|
| 2011 |
Nie X, Evitts R, Besant R, Bolster J. A new technique to determine convection coefficients with flow through particle beds Journal of Heat Transfer. 133. DOI: 10.1115/1.4002945 |
0.745 |
|
| 2011 |
Nie XD, Besant RW, Evitts RW. Heat transfer between gas-solid phases within packed particle beds Particulate Science and Technology. 29: 151-162. DOI: 10.1080/02726351.2010.536302 |
0.509 |
|
| 2011 |
Hemingson HB, Simonson CJ, Besant RW. Steady-state performance of a run-around membrane energy exchanger (RAMEE) for a range of outdoor air conditions International Journal of Heat and Mass Transfer. 54: 1814-1824. DOI: 10.1016/J.Ijheatmasstransfer.2010.12.036 |
0.453 |
|
| 2011 |
Gao S, Evitts RW, Besant RW. Simulation of potash cake strength by discrete element method Granular Matter. 13: 121-126. DOI: 10.1007/S10035-010-0232-5 |
0.348 |
|
| 2011 |
Rasouli M, Akbari S, Hemingson H, Besant RW, Simonson CJ. Application of a run-around membrane energy exchanger in an office building HVAC system Ashrae Transactions. 117: 686-703. |
0.376 |
|
| 2010 |
Rasouli M, Simonson CJ, Besant RW. Applicability and optimum control strategy of energy recovery ventilators in different climatic conditions Energy and Buildings. 42: 1376-1385. DOI: 10.1016/J.Enbuild.2010.03.006 |
0.466 |
|
| 2010 |
Mahmud K, Mahmood GI, Simonson CJ, Besant RW. Performance testing of a counter-cross-flow run-around membrane energy exchanger (RAMEE) system for HVAC applications Energy and Buildings. 42: 1139-1147. DOI: 10.1016/J.Enbuild.2010.02.005 |
0.482 |
|
| 2009 |
Li M, Simonson CJ, Besant RW, Shang W. Run-around energy recovery system for air-to-air applications using cross-flow exchangers coupled with a porous solid desiccant-Part II: Results and performance sensitivity Hvac and R Research. 15: 561-582. DOI: 10.1080/10789669.2009.10390851 |
0.638 |
|
| 2009 |
Li M, Simonson CJ, Besant RW, Shang W. Run-around energy recovery system for air-to-air applicationsusing cross-flow exchangers coupled with aporous solid desiccant-Part I: Model development and verification Hvac and R Research. 15: 537-559. DOI: 10.1080/10789669.2009.10390850 |
0.525 |
|
| 2009 |
Shang W, Besant RW. Performance and design of dehumidifier wheels Hvac and R Research. 15: 437-460. DOI: 10.1080/10789669.2009.10390845 |
0.642 |
|
| 2009 |
Shang W, Besant RW. Effectiveness of desiccant coated regenerative wheels from transient response characteristics and flow channel properties- Part II: Predicting and comparing the latent effectiveness of dehumidifier and energy wheels using transient data and properties Hvac and R Research. 15: 346-365. DOI: 10.1080/10789669.2009.10390841 |
0.468 |
|
| 2009 |
Shang W, Besant RW. Effectiveness of desiccant coated regenerative wheels from transient response characteristics and flow channel properties- Part I: Development of effectiveness equations from transient response characteristics Hvac and R Research. 15: 329-345. DOI: 10.1080/10789669.2009.10390840 |
0.433 |
|
| 2009 |
Wang Y, Evitts RW, Besant RW. The Relationship between cake strength of potash fertilizer and initial moisture content, particle size, and dryiTg time Particulate Science and Technology. 27: 166-176. DOI: 10.1080/02726350902776200 |
0.33 |
|
| 2009 |
Vali A, Simonson CJ, Besant RW, Mahmood G. Numerical model and effectiveness correlations for a run-around heat recovery system with combined counter and cross flow exchangers International Journal of Heat and Mass Transfer. 52: 5827-5840. DOI: 10.1016/J.Ijheatmasstransfer.2009.07.020 |
0.476 |
|
| 2009 |
Seyed-Ahmadi M, Erb B, Simonson CJ, Besant RW. Transient behavior of run-around heat and moisture exchanger system. Part I: Model formulation and verification International Journal of Heat and Mass Transfer. 52: 6000-6011. DOI: 10.1016/J.Ijheatmasstransfer.2009.07.012 |
0.486 |
|
| 2009 |
Seyed-Ahmadi M, Erb B, Simonson CJ, Besant RW. Transient behavior of run-around heat and moisture exchanger system. Part II: Sensitivity studies for a range of initial conditions International Journal of Heat and Mass Transfer. 52: 6012-6020. DOI: 10.1016/J.Ijheatmasstransfer.2009.06.037 |
0.48 |
|
| 2009 |
Nie X, Besant RW, Evitts RW. Convective heat and mass transfer coefficient measurements and correlations for particle beds using temperature and humidity step changes with air flow through a test bed Chemical Engineering Science. 64: 3476-3485. DOI: 10.1016/J.Ces.2009.04.037 |
0.742 |
|
| 2009 |
Erb B, Ahmadi MS, Simonson CJ, Besant RW. Experimental measurements of a run-around membrane energy exchanger (RAMEE) with comparison to a numerical model Ashrae Transactions. 115: 689-705. |
0.368 |
|
| 2008 |
Shang W, Besant RW. Theoretical and experimental methods for the sensible effectiveness of air-to-air energy recovery wheels Hvac and R Research. 14: 373-396. DOI: 10.1080/10789669.2008.10391015 |
0.41 |
|
| 2008 |
Larson MD, Besant RW, Simonson CJ. The effect of membrane deflections on flow rate in crossflow air-to-air exchangers Hvac and R Research. 14: 275-288. DOI: 10.1080/10789669.2008.10391008 |
0.365 |
|
| 2008 |
Nie XD, Evitts RW, Besant RW. Simulation of moisture uptake and transport in a bed of urea particles Industrial and Engineering Chemistry Research. 47: 7888-7896. DOI: 10.1021/Ie701744G |
0.717 |
|
| 2008 |
Nie X, Besant RW, Evitts RW. An experimental study of moisture uptake and transport in a bed of urea particles Granular Matter. 10: 301-308. DOI: 10.1007/S10035-008-0091-5 |
0.693 |
|
| 2008 |
Wang Y, Evitts RW, Besant RW. Modelling crystal growth between potash particles near contact points during drying processes. Part II: Analysis, results, and comparison with experimental data Canadian Journal of Chemical Engineering. 86: 199-206. DOI: 10.1002/Cjce.20031 |
0.363 |
|
| 2008 |
Wang Y, Evitts RW, Besant RW. Modelling crystal growth between potash particles near contact points during drying processes. Part I: Problem formulation Canadian Journal of Chemical Engineering. 86: 192-198. DOI: 10.1002/Cjce.20026 |
0.39 |
|
| 2007 |
Chen H, Evitts RW, Besant RW. Moisture adsorption characteristics of a thin bed of polycrystalline potash pellets. Part II - Modeling and numerical simulation Powder Technology. 171: 46-53. DOI: 10.1016/J.Powtec.2006.09.005 |
0.456 |
|
| 2007 |
Larson MD, Simonson CJ, Besant RW, Gibson PW. The elastic and moisture transfer properties of polyethylene and polypropylene membranes for use in liquid-to-air energy exchangers Journal of Membrane Science. 302: 136-149. DOI: 10.1016/J.Memsci.2007.06.050 |
0.386 |
|
| 2006 |
Shang W, Besant RW. Effects of manufacturing tolerances on regenerative exchanger number of transfer units and entropy generation Journal of Engineering For Gas Turbines and Power. 128: 585-598. DOI: 10.1115/1.2132380 |
0.59 |
|
| 2006 |
Fan H, Simonson CJ, Besant RW, Shang W. Performance of a run-around system for HVAC heat and moisture transfer applications using cross-flow plate exchangers coupled with aqueous lithium bromide Hvac and R Research. 12: 313-336. DOI: 10.1080/10789669.2006.10391181 |
0.671 |
|
| 2006 |
Evitts RW, Yungwirth T, Besant RW. Measuring moisture content of potash bulk fertilizers using a steel ball in a transient heat transfer process Industrial and Engineering Chemistry Research. 45: 3287-3292. DOI: 10.1021/Ie051080O |
0.471 |
|
| 2006 |
Wang Y, Besant RW, Simonson CJ, Shang W. Application of humidity sensors and an interactive device Sensors and Actuators, B: Chemical. 115: 93-101. DOI: 10.1016/J.Snb.2005.08.038 |
0.514 |
|
| 2006 |
Chen H, Evitts RW, Besant RW. Moisture adsorption characteristics of a thin bed of polycrystalline potash pellets. Part I. Experimental study Powder Technology. 170: 158-166. DOI: 10.1016/J.Powtec.2006.09.003 |
0.452 |
|
| 2006 |
Abe OO, Simonson CJ, Besant RW, Shang W. Effectiveness of energy wheels from transient measurements: Part II - Results and verification International Journal of Heat and Mass Transfer. 49: 63-77. DOI: 10.1016/J.Ijheatmasstransfer.2005.08.009 |
0.628 |
|
| 2006 |
Abe OO, Simonson CJ, Besant RW, Shang W. Effectiveness of energy wheels from transient measurements. Part I: Prediction of effectiveness and uncertainty International Journal of Heat and Mass Transfer. 49: 52-62. DOI: 10.1016/J.Ijheatmasstransfer.2005.08.002 |
0.603 |
|
| 2005 |
Shang W, Chen H, Besant RW. Frost growth in regenerative wheels Journal of Heat Transfer. 127: 1015-1026. DOI: 10.1115/1.2005274 |
0.626 |
|
| 2005 |
Shang W, Besant RW. Effects of pore size variations on regenerative wheel performance Journal of Engineering For Gas Turbines and Power. 127: 121-135. DOI: 10.1115/1.1804539 |
0.59 |
|
| 2005 |
Sun J, Besant RW. Heat and mass transfer during silica gel-moisture interactions International Journal of Heat and Mass Transfer. 48: 4953-4962. DOI: 10.1016/J.Ijheatmasstransfer.2005.02.043 |
0.512 |
|
| 2005 |
Fan H, Simonson CJ, Besant RW, Shang W. Run-around heat recovery system using cross-flow flat-plate heat exchangers with aqueous ethylene glycol as the coupling fluid Ashrae Transactions. 111: 901-910. |
0.397 |
|
| 2004 |
Chen RG, Chen H, Besant RW, Evitts RW. Properties required to determine moisture transport by capillarity, gravity, and diffusion in potash beds Industrial and Engineering Chemistry Research. 43: 5365-5371. DOI: 10.1021/Ie0499658 |
0.382 |
|
| 2003 |
Chen H, Thomas L, Besant RW. Fan supplied heat exchanger fin performance under frosting conditions International Journal of Refrigeration. 26: 140-149. DOI: 10.1016/S0140-7007(02)00011-7 |
0.453 |
|
| 2001 |
Peng SW, Besant RW, Strathdee G. Measurement of the enthalpy change during potash-moisture interactions International Journal of Thermal Sciences. 40: 586-594. DOI: 10.1016/S1290-0729(01)01247-9 |
0.434 |
|
| 2001 |
Shang W, Besant RW. Energy wheel effectiveness evaluation, Part I: Outlet airflow property distributions adjacent to an energy wheel Ashrae Transactions. 107: 266-274. |
0.329 |
|
| 2001 |
Sherif SA, Mago PJ, Al-Mutawa NK, Theen RS, Bilen K, Besant RW. Psychrometrics in the supersaturated frost zone Ashrae Transactions. 107: 753-767. |
0.322 |
|
| 2001 |
Sparrow EM, Abraham JP, Martin GL, Tong JC, Besant RW, Wright C. Air-to-air energy exchanger test facility for mass and energy transfer performance Ashrae Transactions. 107: 450-456. |
0.341 |
|
| 2000 |
Peng SW, Besant RW, Strathdee G. Heat and mass transfer in granular potash fertilizer with a surface dissolution reaction Canadian Journal of Chemical Engineering. 78: 1076-1086. DOI: 10.1002/Cjce.5450780607 |
0.537 |
|
| 2000 |
Besant RW, Simonson CJ. Air-to-air energy recovery Ashrae Journal. 42: 31-32+34. |
0.364 |
|
| 1999 |
Carriere M, Schoenau GJ, Besant RW. Investigation of some large building energy conservation opportunities using the DOE-2 model Energy Conversion and Management. 40: 861-872. DOI: 10.1016/S0196-8904(98)00152-6 |
0.365 |
|
| 1999 |
Simonson CJ, Besant RW. Energy wheel effectiveness: Part II-correlations International Journal of Heat and Mass Transfer. 42: 2171-2185. DOI: 10.1016/S0017-9310(98)00327-5 |
0.348 |
|
| 1999 |
Simonson CJ, Besant RW. Energy wheel effectiveness: Part I-development of dimensionless groups International Journal of Heat and Mass Transfer. 42: 2161-2170. DOI: 10.1016/S0017-9310(98)00325-1 |
0.477 |
|
| 1999 |
Peng SW, Strathdee G, Besant RW. Dissolution reaction of potash fertilizer with moisture Canadian Journal of Chemical Engineering. 77: 1127-1134. DOI: 10.1002/Cjce.5450770607 |
0.309 |
|
| 1999 |
Chen H, Thomas L, Besant RW. Prediction of frost height on heat exchanger fins American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 364: 199-206. |
0.356 |
|
| 1999 |
Mao Y, Besant RW, Chen H. Frost characteristics and heat transfer on a flat plate under freezer operating conditions: Part I, Experimentation and correlations Ashrae Transactions. 105. |
0.348 |
|
| 1998 |
Tao YX, Mitchell DR, Besant RW. Effects of exfiltration on moisture and frost accumulation in a fibrous insulation International Journal of Fluid Mechanics Research. 25: 506-519. DOI: 10.1615/Interjfluidmechres.V25.I4-6.50 |
0.48 |
|
| 1998 |
Simonson CJ, Besant RW. Heat and moisture transfer in energy wheels during sorption, condensation, and frosting conditions Journal of Heat Transfer. 120: 699-708. DOI: 10.1115/1.2824339 |
0.484 |
|
| 1998 |
Guo P, Ciepliski DL, Besant RW. A testing and HVAC design methodology for air-to-air heat pipe heat exchangers Hvac and R Research. 4: 3-24. DOI: 10.1080/10789669.1998.10391388 |
0.519 |
|
| 1998 |
Irwin DR, Simonson CJ, Saw KY, Besant RW. Contaminant and heat removal effectiveness and air-to-air heat/energy recovery for a contaminated air space Ashrae Transactions. 104: 433-447. |
0.39 |
|
| 1997 |
Simonson CJ, Besant RW. Heat and moisture transfer in desiccant coated rotary energy exchangers: Part II. Validation and sensitivity studies Hvac and R Research. 3: 351-368. DOI: 10.1080/10789669.1997.10391382 |
0.492 |
|
| 1997 |
Simonson CJ, Besant RW. Heat and moisture transfer in desiccant coated rotary energy exchangers: Part I. Numerical model Hvac and R Research. 3: 325-340. DOI: 10.1080/10789669.1997.10391381 |
0.462 |
|
| 1997 |
Chen H, Besant RW, Tao Y. Two-Dimensional Air Exfiltration and Heat Transfer Through Fiberglass Insulation II. Comparisons between Simulations and Experiments Hvac&R Research. 3: 215-232. DOI: 10.1080/10789669.1997.10391375 |
0.48 |
|
| 1997 |
Chen H, Besant RW, Tao YX. Two-dimensional air exfiltration and heat transfer through fiberglass insulation I. Numerical model and experimental facility Hvac and R Research. 3: 197-213. DOI: 10.1080/10789669.1997.10391374 |
0.503 |
|
| 1997 |
Chen H, Besant RW, Tao YX. Numerical modeling of heat transfer and water vapor adsorption, condensation and frosting within a fiberglass filled cavity during air exfiltration American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 339: 89-98. |
0.414 |
|
| 1997 |
Simonson CJ, Besant RW, Ward Wilson G. Condensation and frosting in energy wheels American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 339: 161-169. |
0.381 |
|
| 1995 |
Mitchell DR, Tao YX, Besant RW. Air filtration with moisture and frosting phase changes in fiberglass insulation-II. Model validation International Journal of Heat and Mass Transfer. 38: 1597-1604. DOI: 10.1016/0017-9310(94)00291-3 |
0.47 |
|
| 1995 |
Mitchell DR, Tao YX, Besant RW. Air filtration with moisture and frosting phase changes in fiberglass insulation-I. Experiment International Journal of Heat and Mass Transfer. 38: 1587-1596. DOI: 10.1016/0017-9310(94)00290-C |
0.477 |
|
| 1994 |
Simonson CJ, Tao YX, Besant RW. Thermal performance and hysteresis in fibrous insulation exposed to moisture and step changes in the cold temperature boundary condition Energy and Buildings. 21: 251-257. DOI: 10.1016/0378-7788(94)90041-8 |
0.476 |
|
| 1994 |
Tao YX, Mao Y, Besant RW. Frost growth characteristics on heat exchanger surfaces: Measurement and simulation studies American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 286: 29-38. |
0.314 |
|
| 1994 |
Mitchell DR, Tao YX, Besant RW. Validation of numerical prediction for heat transfer with airflow and frosting in fibrous insulation Winter Annual Meeting of the American Society of Mechanical Engineers. 1-11. |
0.416 |
|
| 1993 |
Simonson CJ, Tao YX, Besant RW. Thermal hysteresis in fibrous insulation International Journal of Heat and Mass Transfer. 36: 4433-4441. DOI: 10.1016/0017-9310(93)90127-R |
0.45 |
|
| 1993 |
Tao YX, Besant RW, Rezkallah KS. A mathematical model for predicting the densification and growth of frost on a flat plate International Journal of Heat and Mass Transfer. 36: 353-363. DOI: 10.1016/0017-9310(93)80011-I |
0.403 |
|
| 1993 |
Mao Y, Besant RW, Falk J. Measurement and correlations of frost properties with laminar airflow at room temperature over a flat plate Ashrae Transactions. 99: 739-745. |
0.301 |
|
| 1992 |
Tao YX, Besant RW. Prediction of spatial and temporal distributions of frost growth on a flat plate under forced convection American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 193: 131-139. DOI: 10.1115/1.2910665 |
0.417 |
|
| 1992 |
Schoenau G, Lumbis A, Besant R. An examination of operating strategies for energy efficient operation of attached sunspaces in cold climates Energy Conversion and Management. 33: 23-36. DOI: 10.1016/0196-8904(92)90143-K |
0.423 |
|
| 1992 |
Tao YX, Besant RW, Rezkallah KS. The transient thermal response of a glass-fiber insulation slab with hygroscopic effects International Journal of Heat and Mass Transfer. 35: 1155-1167. DOI: 10.1016/0017-9310(92)90176-S |
0.403 |
|
| 1992 |
Tao YX, Besant RW. Hysteresis effects on simultaneous heat and moisture transport in a porous insulation slab American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 206: 191-197. |
0.364 |
|
| 1992 |
Zeng YY, Rezkallah KS, Besant RW. Heat transfer measurements in two-phase two-component flow inside heat exchanger coils of a run-around heat recovery system American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 220: 1-10. |
0.372 |
|
| 1992 |
Zeng YY, Besant RW, Rezkallah KS. Effect of temperature-dependent properties on the performance of run-around heat recovery systems using aqueous-glycol coupling fluids Ashrae Transactions. 98: 551-542. |
0.319 |
|
| 1991 |
Tao YX, Besant RW, Rezkallah KS. Modeling of frost formation in a fibrous insulation slab and on an adjacent cold plate International Communications in Heat and Mass Transfer. 18: 609-618. DOI: 10.1016/0735-1933(91)90074-E |
0.311 |
|
| 1991 |
Schoenau GJ, Lumbis AJ, Besant RW. Development and verification of a simulation model for predicting the thermal behavior of attached sunspaces Energy Conversion and Management. 32: 319-331. DOI: 10.1016/0196-8904(91)90050-S |
0.322 |
|
| 1991 |
Tao YX, Besant RW, Rezkallah KS. Unsteady heat and mass transfer with phase changes in an insulation slab: frosting effects International Journal of Heat and Mass Transfer. 34: 1593-1603. DOI: 10.1016/0017-9310(91)90139-6 |
0.411 |
|
| 1991 |
Tao YX, Besant RW, Rezkallah KS. Frost accumulation in a fibrous insulation slab and on an adjacent cold plate. Effects of a contact gap American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 159: 61-68. |
0.354 |
|
| 1991 |
Tao YX, Besant RW, Rezkallah KS. Effects of hygroscopicity on transient thermal response of an initially dry glass-fiber insulation slab American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 159: 53-59. |
0.327 |
|
| 1990 |
Schoenau GJ, Lumbis AJ, Besant RW. Thermal performance of four sunspaces in a cold climate Energy and Buildings. 14: 273-286. DOI: 10.1016/0378-7788(90)90090-6 |
0.427 |
|
| 1990 |
Tao YX, Besant RW, Rezkallah KS. Moisture and frost accumulation in a fibrous insulation slab American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 156: 59-68. |
0.318 |
|
| 1988 |
Arinze EA, Schoenau GJ, Besant RW. Computer simulation of heating requirement and evaluation of the effects of permanent and movable external thermal insulations on energy conservation in greenhouses Computers and Electronics in Agriculture. 2: 209-231. DOI: 10.1016/0168-1699(88)90025-7 |
0.365 |
|
| 1987 |
White S, Besant RW, Bergan AT. HEAT TRANSFER AND TEMPERATURE DISTRIBUTION IN ASPHALT DURING ROAD PAVING OPERATIONS UNDER COLD WEATHER CONDITIONS . 71-79. |
0.307 |
|
| 1987 |
Bantle MRL, Barber EM, Besant RW. MATHEMATICAL MODEL OF A PLATE TYPE AIR-TO-AIR HEAT EXCHANGER OPERATING UNDER FROST FORMING CONDITIONS . 195-205. |
0.389 |
|
| 1984 |
Besant RW, Hamlin T, Schoenau GJ. PERFORMANCE OF RESIDENTIAL AIR-TO-AIR HEAT EXCHANGERS . 265-269. |
0.357 |
|
| 1984 |
Richmond WR, Besant RW, Watson LG. TEMPERATURES AND HEAT LOSSES IN BASEMENT FLOORS WITH AND WITHOUT SUBFLOOR INSULATION . 179-182. |
0.305 |
|
| 1979 |
Besant RW, Dumont RS, Schoenau G. The Saskatchewan conservation house: Some preliminary performance results Energy and Buildings. 2: 163-174. DOI: 10.1016/0378-7788(79)90031-8 |
0.456 |
|
| 1979 |
Besant RW, Schoenau GJ, Dumont RS. SOLAR ASSISTED HEAT EXCHANGER FOR LIVESTOCK SHELTERS . |
0.349 |
|
| 1976 |
Besant RW, Winn CB. COST EFFECTIVE SOLAR HEATING OF HOUSES WITH SEASONAL STORAGE OF ENERGY . |
0.316 |
|
| 1972 |
Tseng CM, Besant RW. Transient heat and mass transfer in fully developed laminar tube flows International Journal of Heat and Mass Transfer. 15: 203-215. DOI: 10.1016/0017-9310(72)90069-5 |
0.464 |
|
| 1970 |
Manian VS, Besant RW, McDonald TW. A skin friction balance using air bearings Journal of Physics E: Scientific Instruments. 3: 82-83. DOI: 10.1088/0022-3735/3/1/423 |
0.312 |
|
| 1969 |
Manian VS, McDonald TW, Besant RW. Heat transfer measurements in cylindrical wall jets International Journal of Heat and Mass Transfer. 12: 673-679. DOI: 10.1016/0017-9310(69)90001-5 |
0.419 |
|
| 1962 |
Soo SL, Besant RW, Sarafa ZN. The nature of heat transfer from an enclosed rotating disk Zeitschrift FüR Angewandte Mathematik Und Physik. 13: 297-309. DOI: 10.1007/Bf01601000 |
0.351 |
|
| Show low-probability matches. |