| Year |
Citation |
Score |
| 2011 |
Moon S, Choi J, Farris RJ. Electrospinning of polyacrylonitrile solutions containing diluted sodiumthiocyanate Polymer Engineering and Science. 51: 1122-1129. DOI: 10.1002/Pen.21814 |
0.443 |
|
| 2010 |
Park S, Moon SC, Chen D, Farris RJ, Russell TP. Preparation of 1 inch gold nanowires from PS-b-P4VP block copolymers Journal of Materials Chemistry. 20: 1198-1202. DOI: 10.1039/B920842A |
0.371 |
|
| 2009 |
Ryu BY, Moon S, Kosif I, Ranganathan T, Farris RJ, Emrick T. Deoxybenzoin-based epoxy resins Polymer. 50: 767-774. DOI: 10.1016/J.Polymer.2008.12.009 |
0.559 |
|
| 2009 |
Moon S, Farris RJ. Strong electrospun nanometer-diameter polyacrylonitrile carbon fiber yarns Carbon. 47: 2829-2839. DOI: 10.1016/J.Carbon.2009.06.027 |
0.383 |
|
| 2009 |
Moon SC, Farris RJ. Electrospinning of heated gelatin-sodium alginate-water solutions Polymer Engineering and Science. 49: 1616-1620. DOI: 10.1002/Pen.21355 |
0.336 |
|
| 2009 |
Moon S, Ryu BY, Choi J, Jo B, Farris RJ. The morphology and mechanical properties of sodium alginate based electrospun poly(ethylene oxide) nanofibers Polymer Engineering and Science. 49: 52-59. DOI: 10.1002/Pen.21216 |
0.426 |
|
| 2009 |
Moon S, Ku BC, Emrick T, Coughlin BE, Farris RJ. Flame resistant electrospun polymer nanofibers from deoxybenzoin-based polymers Journal of Applied Polymer Science. 111: 301-307. DOI: 10.1002/App.29067 |
0.594 |
|
| 2008 |
Ranganathan T, Beaulieu M, Zilberman J, Smith KD, Westmoreland PR, Farris RJ, Coughlin EB, Emrick T. Thermal degradation of deoxybenzoin polymers studied by pyrolysis-gas chromatography/mass spectrometry Polymer Degradation and Stability. 93: 1059-1066. DOI: 10.1016/J.Polymdegradstab.2008.03.021 |
0.56 |
|
| 2008 |
Moon S, Choi J, Farris RJ. Highly porous polyacrylonitrile/polystyrene nanofibers by electrospinning Fibers and Polymers. 9: 276-280. DOI: 10.1007/S12221-008-0044-Y |
0.406 |
|
| 2008 |
Moon S, Farris RJ. The morphology, mechanical properties, and flammability of aligned electrospun polycarbonate (PC) nanofibers Polymer Engineering and Science. 48: 1848-1854. DOI: 10.1002/Pen.21158 |
0.445 |
|
| 2008 |
Moon S, Choi J, Farris RJ. Preparation of aligned polyetherimide fiber by electrospinning Journal of Applied Polymer Science. 109: 691-694. DOI: 10.1002/App.27172 |
0.424 |
|
| 2007 |
Ranganathan T, Ku BC, Zilberman J, Beaulieu M, Farris RJ, Coughlin EB, Emrick T. Poly(arylate-phosphonate) copolymers with deoxybenzoin in the backbone: Synthesis, characterization, and thermal properties Journal of Polymer Science, Part a: Polymer Chemistry. 45: 4573-4580. DOI: 10.1002/Pola.22188 |
0.59 |
|
| 2007 |
Xu T, Farris RJ. Comparative studies of ultra high molecular weight polyethylene fiber reinforced composites Polymer Engineering and Science. 47: 1544-1553. DOI: 10.1002/Pen.20876 |
0.409 |
|
| 2007 |
Tripathy AR, Farris RJ, MacKnight WJ. Novel fire resistant matrixes for composites from cyclic poly(butylene terephthalate) oligomers Polymer Engineering and Science. 47: 1536-1543. DOI: 10.1002/Pen.20875 |
0.401 |
|
| 2007 |
SungCheal M, Farris RJ. How is it possible to produce highly oriented yarns of electrospun fibers? Polymer Engineering and Science. 47: 1530-1535. DOI: 10.1002/Pen.20874 |
0.386 |
|
| 2007 |
Raman A, Farris RJ. Discontinuous deformation in an elastic material. Part 1. Energy dissipative and storage applications Polymer Engineering and Science. 47: 1511-1520. DOI: 10.1002/Pen.20873 |
0.322 |
|
| 2006 |
Ranganathan T, Zilberman J, Farris RJ, Coughlin EB, Emrick T. Synthesis and characterization of halogen-free antiflammable polyphosphonates containing 4,4′-bishydroxydeoxybenzoin Macromolecules. 39: 5974-5975. DOI: 10.1021/Ma0614693 |
0.471 |
|
| 2006 |
Ellzey KA, Ranganathan T, Zilberman J, Coughlin EB, Farris RJ, Emrick T. Deoxybenzoin-based polyarylates as halogen-free fire-resistant polymers Macromolecules. 39: 3553-3558. DOI: 10.1021/Ma052777O |
0.747 |
|
| 2006 |
Fennessey SF, Pedicini A, Farris RJ. Mechanical behavior of nonwoven electrospun fabrics and yarns Acs Symposium Series. 918: 300-318. |
0.758 |
|
| 2005 |
Xu T, Farris RJ. Optimizing the impact resistance of matrix-free spectra® fiber-reinforced composites Journal of Composite Materials. 39: 1203-1220. DOI: 10.1177/0021998305048749 |
0.399 |
|
| 2005 |
Xu T, Farris RJ. Shapeable matrix-free Spectra® fiber-reinforced polymeric composites via high-temperature high-pressure sintering: Process-structure-property relationship Journal of Polymer Science, Part B: Polymer Physics. 43: 2767-2789. DOI: 10.1002/Polb.20556 |
0.432 |
|
| 2004 |
Fennessey SF, Farris RJ. Fabrication of aligned and molecularly oriented electrospun polyacrylonitrile nanofibers and the mechanical behavior of their twisted yarns Polymer. 45: 4217-4225. DOI: 10.1016/J.Polymer.2004.04.001 |
0.779 |
|
| 2004 |
Pedicini A, Farris RJ. Thermally Induced Color Change in Electrospun Fiber Mats Journal of Polymer Science, Part B: Polymer Physics. 42: 752-757. DOI: 10.1002/Polb.10711 |
0.766 |
|
| 2004 |
Tripathy AR, Williams DE, Farris RJ. Rubber plasticizers from degraded/devulcanized scrap rubber: A method of recycling waste rubber Polymer Engineering and Science. 44: 1338-1350. DOI: 10.1002/Pen.20129 |
0.574 |
|
| 2004 |
Fennessey SF, Farris RJ. Electrospinning: Preparation of aligned and oriented polyacrylonitrile nanofibers Annual Technical Conference - Antec, Conference Proceedings. 2: 1446-1450. |
0.777 |
|
| 2003 |
Yoo ES, Gavrin AJ, Farris RJ, Coughlin EB. Synthesis and characterization of the polyhydroxyamide/polymethoxyamide family of polymers High Performance Polymers. 15: 519-535. DOI: 10.1177/09540083030154008 |
0.403 |
|
| 2003 |
Feng R, Farris RJ. Influence of processing conditions on the thermal and mechanical properties of SU8 negative photoresist coatings Journal of Micromechanics and Microengineering. 13: 80-88. DOI: 10.1088/0960-1317/13/1/312 |
0.452 |
|
| 2003 |
Zhang H, Farris RJ, Westmoreland PR. Low flammability and thermal decomposition behavior of poly(3,3′-dihydroxybiphenylisophthalamide) and its derivatives Macromolecules. 36: 3944-3954. DOI: 10.1021/Ma021764X |
0.362 |
|
| 2003 |
Pedicini A, Farris RJ. Mechanical behavior of electrospun polyurethane Polymer. 44: 6857-6862. DOI: 10.1016/J.Polymer.2003.08.040 |
0.773 |
|
| 2003 |
Ellzey KA, Farris RJ, Emrick T. Synthetic and thermal studies of bisphenol-C containing Poly(aryletherketone)s Polymer Bulletin. 50: 235-242. DOI: 10.1007/S00289-003-0162-Z |
0.747 |
|
| 2003 |
Fennessey SF, Farris RJ. Electrospinning: Preparation of Continuous Nanofibers Annual Technical Conference - Antec, Conference Proceedings. 3: 3766-3770. |
0.782 |
|
| 2002 |
Morin JE, Williams DE, Farris RJ. A novel method to recycle scrap tires: High-pressure high-temperature sintering Rubber Chemistry and Technology. 75: 955-968. DOI: 10.5254/1.3547695 |
0.713 |
|
| 2002 |
Feng R, Farris RJ. The characterization of thermal and elastic constants for an epoxy photoresist SU8 coating Journal of Materials Science. 37: 4793-4799. DOI: 10.1023/A:1020862129948 |
0.384 |
|
| 2002 |
Tripathy AR, Morin JE, Williams DE, Eyles SJ, Farris RJ. A novel approach to improving the mechanical properties in recycled vulcanized natural rubber and its mechanism Macromolecules. 35: 4616-4627. DOI: 10.1021/Ma012110B |
0.694 |
|
| 2002 |
Zhang H, Westmoreland PR, Farris RJ, Coughlin EB, Plichta A, Brzozowski ZK. Thermal decomposition and flammability of fire-resistant, UV/visible-sensitive polyarylates, copolymers and blends Polymer. 43: 5463-5472. DOI: 10.1016/S0032-3861(02)00427-5 |
0.392 |
|
| 2002 |
Zheng L, Kasi RM, Farris RJ, Bryan Coughlin E. Synthesis and thermal properties of hybrid copolymers of syndiotactic polystyrene and polyhedral oligomeric silsesquioxane Journal of Polymer Science, Part a: Polymer Chemistry. 40: 885-891. DOI: 10.1002/Pola.10175 |
0.382 |
|
| 2002 |
Feng R, Farris RJ. Linear thermoelastic characterization of anisotropic poly(ethylene terephthalate) films Journal of Applied Polymer Science. 86: 2937-2947. DOI: 10.1002/App.11179 |
0.567 |
|
| 2002 |
Williams DE, Morin JE, Tripathy AR, Farris RJ. Redefining thermosets: Molding vulcanized rubber into new parts Rubber World. 226: 40. |
0.551 |
|
| 2001 |
Zheng L, Farris RJ, Coughlin EB. Novel polyolefin nanocomposites: Synthesis and characterizations of metallocene-catalyzed polyolefin polyhedral oligomeric silsesquioxane copolymers Macromolecules. 34: 8034-8039. DOI: 10.1021/Ma0110094 |
0.367 |
|
| 2001 |
Park SK, Farris RJ. Dry-jet wet spinning of aromatic polyamic acid fiber using chemical imidization Polymer. 42: 10087-10093. DOI: 10.1016/S0032-3861(01)00576-6 |
0.411 |
|
| 2001 |
Rao Y, Waddon AJ, Farris RJ. The evolution of structure and properties in poly(p-phenylene terephthalamide) fibers Polymer. 42: 5925-5935. DOI: 10.1016/S0032-3861(00)00906-X |
0.39 |
|
| 2001 |
Rao Y, Waddon AJ, Farris RJ. Structure-property relation in poly(p-phenylene terephthalamide) (PPTA) fibers Polymer. 42: 5937-5946. DOI: 10.1016/S0032-3861(00)00905-8 |
0.407 |
|
| 2001 |
Zheng L, Farris RJ, Bryan Coughlin E. Synthesis of polyethylene hybrid copolymers containing polyhedral oligomeric silsesquioxane prepared with ring-opening metathesis copolymerization Journal of Polymer Science, Part a: Polymer Chemistry. 39: 2920-2928. DOI: 10.1002/Pola.1272 |
0.373 |
|
| 2001 |
Cho SH, Kim G, Mccarthy TJ, Farris RJ. Orthotropic elastic constants for polyimide film Polymer Engineering and Science. 41: 301-307. DOI: 10.1002/Pen.10729 |
0.347 |
|
| 2000 |
Park SK, Farris RJ. Effect of heat treatment on the thermal and mechanical properties of polyhydroxyamic acid precursor films Polymer Bulletin. 45: 405-410. DOI: 10.1007/S002890070014 |
0.368 |
|
| 2000 |
Park SK, Cho SH, Farris RJ. Dry-jet wet spinning of polyhydroxyamide fibers Fibers and Polymers. 1: 92-96. DOI: 10.1007/Bf02875191 |
0.383 |
|
| 2000 |
Agarwal N, Farris RJ. Mechanical properties of acrylic based latex blend coatings Polymer Engineering and Science. 40: 376-390. DOI: 10.1002/Pen.11171 |
0.347 |
|
| 2000 |
Chang JH, Farris RJ. Characterization of two precursor polyblends: polyhydroxyamide and poly(amic acid) Polymer Engineering and Science. 40: 320-329. DOI: 10.1002/Pen.11165 |
0.375 |
|
| 2000 |
Rao Y, Farris RJ. Modeling and experimental study of the influence of twist on the mechanical properties of high-performance fiber yarns Journal of Applied Polymer Science. 77: 1938-1949. DOI: 10.1002/1097-4628(20000829)77:9<1938::Aid-App9>3.0.Co;2-D |
0.657 |
|
| 1999 |
Agarwal N, Farris RJ. Thermodynamics of deformation of latex blend coatings and its implications for tailoring their properties Journal of Coatings Technology. 71: 61-72. DOI: 10.1007/Bf02698385 |
0.358 |
|
| 1999 |
Chang JH, Farris RJ. Thermal and mechanical properties of the precursor polymers: comparison of their properties with poly(amic acid) Polymer Engineering and Science. 39: 638-645. DOI: 10.1002/Pen.11453 |
0.359 |
|
| 1998 |
Chang JH, Chen MJ, Farris RJ. Effect of heat treatment on the thermal and mechanical properties of a precursor polymer: Polyhydroxyamide Polymer. 39: 5649-5654. DOI: 10.1016/S0032-3861(97)10364-0 |
0.395 |
|
| 1997 |
Agarwal K, Hoagland DA, Farris RJ. Effect of moisture absorption on the thermal properties of Bombyx mori silk fibroin films Journal of Applied Polymer Science. 63: 401-410. DOI: 10.1002/(Sici)1097-4628(19970118)63:3<401::Aid-App17>3.0.Co;2-2 |
0.323 |
|
| 1995 |
Chang JH, Farris RJ. Blends of thermotropic liquid crystalline polymer with a flexible side group and poly(butylene terephthalate) Polymer Journal. 27: 780-789. DOI: 10.1295/Polymj.27.780 |
0.481 |
|
| 1995 |
Wedler W, Tang W, Winter HH, MacKnight WJ, Farris RJ. A Segmented Polyurethane Elastomer with Liquid Crystalline Hard Segments. 2. Rheological Study Macromolecules. 28: 512-516. DOI: 10.1021/Ma00106A014 |
0.328 |
|
| 1995 |
Petrović ZS, Farris RJ. Morphology and properties of fibers based on polycarbonate/liquid crystalline polymer blends Polymers For Advanced Technologies. 6: 91-99. DOI: 10.1002/Pat.1995.220060206 |
0.469 |
|
| 1995 |
Petrović ZS, Farris R. Structure–property relationship in fibers spun from poly(ethylene terephthalate) and liquid crystalline polymer blends. II. Effect of spinning temperature on fiber properties Journal of Applied Polymer Science. 58: 1349-1363. DOI: 10.1002/App.1995.070580817 |
0.46 |
|
| 1995 |
Petrović ZS, Farris R. Structure–property relationship in fibers spun from poly(ethylene terephthalate) and liquid crystalline polymer blends. I. The effect of composition and processing on fiber morphology and properties Journal of Applied Polymer Science. 58: 1077-1085. DOI: 10.1002/App.1995.070580614 |
0.462 |
|
| 1994 |
Plepys A, Vratsanos MS, Farris RJ. Determination of residual stresses using incremental linear elasticity Composite Structures. 27: 51-56. DOI: 10.1016/0263-8223(94)90066-3 |
0.303 |
|
| 1994 |
Gagnon KD, Lenz RW, Farris RJ, Fuller RC. Chemical modification of bacterial elastomers: 2. Sulfur vulcanization Polymer. 35: 4368-4375. DOI: 10.1016/0032-3861(94)90094-9 |
0.38 |
|
| 1994 |
Gagnon KD, Lenz RW, Farris RJ, Fuller RC. Chemical modification of bacterial elastomers: 1. Peroxide crosslinking Polymer. 35: 4358-4367. DOI: 10.1016/0032-3861(94)90093-0 |
0.366 |
|
| 1994 |
Joslin SL, Giesa R, Farris RJ. Thermotropic liquid-crystalline polymers with flexible moieties blended with poly(ethylene terephthalate) Polymer. 35: 4303-4312. DOI: 10.1016/0032-3861(94)90087-6 |
0.357 |
|
| 1994 |
Jennings RM, Farris RJ. Formation of a highly ordered poly (N,N'-bis-phenoxyphenylpyromellitimide) powder using a high pressure curing technique Journal of Polymer Science Part B. 32: 1457-1464. DOI: 10.1002/Polb.1994.090320817 |
0.355 |
|
| 1994 |
Bennett GS, Farris RJ. The synthesis and characterization of amine‐terminated poly(aryl ether ketone)s as a function of side group and molecular weight Journal of Polymer Science Part a: Polymer Chemistry. 32: 73-87. DOI: 10.1002/Pola.1994.080320109 |
0.383 |
|
| 1994 |
Bennett GS, Farris RJ. The synthesis and characterization of novel thermotropic liquid crystalline poly(aryl ether ketone)s Polymer Engineering &Amp; Science. 34: 781-793. DOI: 10.1002/Pen.760341002 |
0.333 |
|
| 1994 |
Joslin S, Jackson W, Farris R. The thermal and mechanical behavior of poly(ethylene terephthalate) fibers incorporating novel thermotropic liquid crystalline copolymers Journal of Applied Polymer Science. 54: 439-455. DOI: 10.1002/App.1994.070540404 |
0.469 |
|
| 1994 |
Joslin S, Jackson W, Farris R. A novel TLCP blended with PET and PC matrices Journal of Applied Polymer Science. 54: 289-302. DOI: 10.1002/App.1994.070540303 |
0.43 |
|
| 1993 |
Lietzaua C, Farris RJ. Glass-Coated, Surface-Modified High-Performance Polymer Fibers Mrs Proceedings. 305: 141. DOI: 10.1557/Proc-305-141 |
0.411 |
|
| 1993 |
Vratsanos LA, Farris RJ. A predictive model for the mechanical behavior of particulate composites. Part I: Model derivation Polymer Engineering &Amp; Science. 33: 1458-1465. DOI: 10.1002/Pen.760332204 |
0.302 |
|
| 1993 |
Farris RJ, Goldfarb J, Maden MA. The correlation between residual stresses and delamination behavior of polymer coatings Makromolekulare Chemie. Macromolecular Symposia. 68: 57-67. DOI: 10.1002/Masy.19930680107 |
0.304 |
|
| 1992 |
Gagnon KD, Lenz RW, Farris RJ, Fuller RC. Mechanical properties of a thermoplastic elastomer produced by the bacterium pseudomonas oleovorans Rubber Chemistry and Technology. 65: 761-777. DOI: 10.5254/1.3538640 |
0.402 |
|
| 1992 |
Gagnon KD, Lenz RW, Farris RJ, Fuller RC. Crystallization behavior and its influence on the mechanical properties of a thermoplastic elastomer produced by Pseudomonas oleovorans Macromolecules. 25: 3723-3728. DOI: 10.1021/Ma00040A018 |
0.315 |
|
| 1991 |
Tong K, Taylor JF, Farris RJ. Mechanical Characterization of Photoresist Polymer Coatings as a Function of Processing History Mrs Proceedings. 226. DOI: 10.1557/Proc-226-109 |
0.343 |
|
| 1991 |
Goldfarb JL, Farris RJ. Calorimetric Measurements of The Heat Generated by The Peel Adhesion Test The Journal of Adhesion. 35: 233-244. DOI: 10.1080/00218469108041010 |
0.317 |
|
| 1991 |
Bennett GS, Farris RJ, Thompson SA. Amine-terminated poly(aryl ether ketone)-epoxy/amine resin systems as tough high performance materials Polymer. 32: 1633-1641. DOI: 10.1016/0032-3861(91)90399-4 |
0.379 |
|
| 1991 |
Hwang CR, Malone MF, Farris RJ, Martin DC, Thomas EL. Microstructure and mechanical properties of in-situ network composite fibres of PBZT with nylon Journal of Materials Science. 26: 2365-2371. DOI: 10.1007/Bf01130183 |
0.366 |
|
| 1991 |
Hwang CR, Malone MF, Farris RJ. Molecular composites of poly(p-phenylene benzobisthiazole) with thermoplastics: coagulation studies Journal of Materials Science. 26: 1762-1768. DOI: 10.1007/Bf00543599 |
0.341 |
|
| 1991 |
Pottick LA, Farris RJ. Property modifications in poly(p‐phenylene benzobisthiazole) fibers with high‐tension and high‐temperature drying versus postprocessing heat treatment Polymer Engineering &Amp; Science. 31: 1441-1449. DOI: 10.1002/Pen.760312002 |
0.45 |
|
| 1990 |
Magliochetti MJ, Malone MF, Farris RJ. Solution viscosity for blends of lyotropic liquid crystalline and thermoplastic polymers Journal of Rheology. 34: 485-502. DOI: 10.1122/1.550093 |
0.363 |
|
| 1990 |
Allen SR, Farris RJ. Complications of cylindrical anisotropy on the properties of fibres Polymer. 31: 1467-1472. DOI: 10.1016/0032-3861(90)90152-O |
0.307 |
|
| 1990 |
Plepys AR, Farris RJ. Evolution of residual stresses in three-dimensionally constrained epoxy resins: comparison of filled and unfilled systems . 121-132. DOI: 10.1016/0032-3861(90)90019-U |
0.34 |
|
| 1990 |
Rakas MA, Farris RJ. Effect of coagulant on the structure and properties of poly(p-phenylene benzobisthiazole) fibers [PBZT] Journal of Applied Polymer Science. 40: 823-833. DOI: 10.1002/app.1990.070400518 |
0.347 |
|
| 1989 |
Adams GW, Farris RJ. Latent energy of deformation of amorphous polymers: 2. Thermomechanical and dynamic mechanical properties Polymer. 30: 1829-1835. DOI: 10.1016/0032-3861(89)90353-4 |
0.353 |
|
| 1989 |
Adams GW, Farris RJ. Latent energy of deformation of amorphous polymers: 1. Deformation calorimetry Polymer. 30: 1824-1828. DOI: 10.1016/0032-3861(89)90352-2 |
0.347 |
|
| 1989 |
Zihlif AM, Feldman L, Farris RJ. Modification of polymer properties to minimize thermal stresses in adhesive joints Journal of Materials Science. 24: 3267-3272. DOI: 10.1007/Bf01139051 |
0.369 |
|
| 1989 |
Farris RJ, Vratsanos MS. Impulse viscoelasticity: a new method to study polymerization of thermosets International Journal of Fracture. 39: 93-102. DOI: 10.1007/Bf00047442 |
0.38 |
|
| 1989 |
Vratsanos MS, Farris RJ. Network mechanical properties of amine‐cured epoxies Polymer Engineering &Amp; Science. 29: 806-816. DOI: 10.1002/Pen.760291209 |
0.358 |
|
| 1988 |
Hwang CR, Malone MF, Farris RJ, Martin DC, Thomas EL. “In-Situ Network” Composite Fibers of Pbzt/Nylon Mrs Proceedings. 134: 547. DOI: 10.1557/Proc-134-547 |
0.401 |
|
| 1988 |
Gabriel CA, Farris RJ, Malone MF. Structure–Property Relationship of Solution-Spun Ppbt/Peek and Ppbt/Nylon 6,6 Composite Fibers Mrs Proceedings. 134. DOI: 10.1557/Proc-134-541 |
0.399 |
|
| 1988 |
Deteresa SJ, Farris RJ. The Prime Importance of Second-Order Effects in Rigid-Rod Polymers Mrs Proceedings. 134: 375. DOI: 10.1557/Proc-134-375 |
0.328 |
|
| 1988 |
Allen SR, Farris RJ. Mechanical Behavior of Rigid Rod Polymeric Fibers Mrs Proceedings. 134: 297. DOI: 10.1557/Proc-134-297 |
0.412 |
|
| 1988 |
Deteresa SJ, Porter RS, Farris RJ. Experimental verification of a microbuckling model for the axial compressive failure of high performance polymer fibres Journal of Materials Science. 23: 1886-1894. DOI: 10.1007/Bf01115735 |
0.4 |
|
| 1988 |
Bauer CL, Farris RJ, Vratsanos MS. DETERMINATION OF THE STRESSES AND PROPERTIES OF POLYMER COATINGS Journal of Coatings Technology. 60: 51-55. DOI: 10.1007/978-1-4613-1047-1_33 |
0.376 |
|
| 1988 |
Adams GW, Farris RJ. LATENT ENERGY OF DEFORMATION OF BISPHENOL A POLYCARBONATE Journal of Polymer Science, Part B: Polymer Physics. 26: 433-445. DOI: 10.1002/Polb.1988.090260216 |
0.332 |
|
| 1988 |
Bauer CL, Farris RJ. MECHANICAL BEHAVIOR OF POLYMER COATINGS: SOLVENT REMOVAL IN POLYAMIC ACID FILMS Polymer Engineering and Science. 28: 688-695. DOI: 10.1002/Pen.760281009 |
0.336 |
|
| 1988 |
Thompson SA, Farris RJ. NOVEL METHOD FOR CROSSLINKING POLYETHERETHERKETONE Journal of Applied Polymer Science. 36: 1113-1120. DOI: 10.1002/App.1988.070360512 |
0.322 |
|
| 1988 |
Vratsanos MS, Farris RJ. A method for calculating dynamic mechanical properties using fourier transforms of pulse deformation experiments Journal of Applied Polymer Science. 36: 403-413. DOI: 10.1002/App.1988.070360212 |
0.309 |
|
| 1988 |
Nehme OA, Gabriel CA, Farris RJ, Thomas EL, Malone MF. MICROSTRUCTURAL INVESTIGATIONS OF PBT/NYLON 6,6 COMPOSITES Journal of Applied Polymer Science. 35: 1955-1965. DOI: 10.1002/App.1988.070350721 |
0.374 |
|
| 1988 |
Hwang CR, Malone MF, Farris RJ. Processing and properties of PBT/nylon composite fibers Polymeric Materials Science and Engineering, Proceedings of the Acs Division of Polymeric Materials Science and Engineering. 59: 440-444. |
0.323 |
|
| 1987 |
Feldman L, Zihlif AM, Farris RJ, Thomas EL. Temperature and strain rate dependence of the deformation behaviour of poly(paraphenylene benzobisthiazole) Journal of Materials Science. 22: 1199-1205. DOI: 10.1007/Bf01233109 |
0.324 |
|
| 1987 |
Vratsanos MS, Thomas EL, Farris RJ. The adhesive behaviour of poly(p-phenylene benzobisthiazole) (PBT)/epoxy composites Journal of Materials Science. 22: 419-428. DOI: 10.1007/Bf01160748 |
0.358 |
|
| 1987 |
Farber JN, Farris RJ. Model for prediction of the elastic response of reinforced materials over wide ranges of concentration Journal of Applied Polymer Science. 34: 2093-2104. DOI: 10.1002/App.1987.070340604 |
0.309 |
|
| 1987 |
Wickliffe SM, Malone MF, Farris RJ. Processing and properties of poly(p‐phenylene benzobisthiazole)/nylon fibers Journal of Applied Polymer Science. 34: 931-944. DOI: 10.1002/App.1987.070340306 |
0.488 |
|
| 1987 |
Vratsanos MS, Farris RJ. A novel method for measuring the uniaxial mechanical properties of an epoxy resin during polymerization Journal of Applied Polymer Science. 33: 915-923. DOI: 10.1002/App.1987.070330320 |
0.365 |
|
| 1986 |
Ueda H, Karasz FE, Farris RJ. CHARACTERIZATION OF MIXTURES OF LINEAR POLYETHYLENES OF ULTRAHIGH AND MODERATE MOLECULAR WEIGHTS Polymer Engineering and Science. 26: 1483-1488. DOI: 10.1002/Pen.760262104 |
0.351 |
|
| 1986 |
DeTeresa SJ, Porter RS, Farris RJ. AXIAL COMPRESSIVE STRENGTH OF HIGH PERFORMANCE POLYMER FIBERS Polymeric Materials Science and Engineering, Proceedings of the Acs Division of Polymeric Material. 55: 902. |
0.369 |
|
| 1986 |
Gabriel CA, Farris RJ, Malone MF. PEEK AND PBT FIBERS SPUN FROM A MOLECULAR COMPOSITE SOLUTION Tappi Journal. 69: 85-88. |
0.344 |
|
| 1986 |
Gabriel CA, Farris RJ, Malone MF. MECHANICS AND STRUCTURE OF SOLUTION SPUN COMPOSITE FIBERS OF POLY(P-PHENYLENE BENZOBISTHIAZOLE) WITH NYLON 6,6 AND WITH POLY(ETHERETHER KETONE) Polymeric Materials Science and Engineering, Proceedings of the Acs Division of Polymeric Material. 55: 903. |
0.344 |
|
| 1986 |
Gabriel CA, Farris RJ, Malone MF. PEEK/PBT FIBERS SPUN FROM A MOLECULAR COMPOSITE SOLUTION Nonwovens, Symposium Notes of the Technical Association of the Pulp and Paper Industry. 255-258. |
0.34 |
|
| 1985 |
Allen SR, Farris RJ, Thomas EL. High modulus/high strength poly-(p-phenylene benzobisthiazole) fibres - Part 2 Structure-property investigations Journal of Materials Science. 20: 4583-4592. DOI: 10.1007/Bf00559348 |
0.375 |
|
| 1985 |
DeTeresa SJ, Porter RS, Farris RJ. A model for the compressive buckling of extended chain polymers Journal of Materials Science. 20: 1645-1659. DOI: 10.1007/Bf00555268 |
0.385 |
|
| 1985 |
Allen SR, Farris RJ, Thomas EL. High-modulus-high-strength poly-(p-phenylene benzobisthiazole) fibres - Part 1 Heat treatment processing Journal of Materials Science. 20: 2727-2734. DOI: 10.1007/Bf00553034 |
0.363 |
|
| 1985 |
Feldman L, Farris RJ, Thomas EL. Mechanical properties of as-extruded and heat-treated poly-(p-phenylene benzobisthiazole) films Journal of Materials Science. 20: 2719-2726. DOI: 10.1007/Bf00553033 |
0.33 |
|
| 1985 |
Woo EJ, Farber G, Farris RJ, Lillya CP, Chien JCW. STRUCTURE-PROPERTY RELATIONSHIPS IN THERMOPLASTIC ELASTOMERS: 1. SEGMENTED POLYETHER-POLYURETHANES Polymer Engineering and Science. 25: 834-840. DOI: 10.1002/Pen.760251308 |
0.393 |
|
| 1985 |
Pottick LA, Farris RJ. EFFECT OF TENSION DURING DRYING ON THE STRUCTURE AND MECHANICS OF POLY(P-PHENYLENE BENZOBISTHIAZOLE) FIBERS Polymer Engineering and Science. 25: 284-288. DOI: 10.1002/Pen.760250506 |
0.445 |
|
| 1985 |
Pottick LA, Farris RJ. ALTERNATIONS IN THE STRUCTURE AND MECHANICS OF POLY(P-PHENYLENE BENZOBISTHIAZOLE) FIBERS DUE TO THE COLLAPSE PROCESS DURING DRYING . 65-71. |
0.309 |
|
| 1984 |
Burchell DJ, Lasch JE, Dobrovolny E, Page N, Domian J, Farris RJ, Hsu SL. Deformation Studies of Polymers by Fourier Transform Infrared Spectroscopy II: Mechanical Stretcher and its Interface to the Spectrometer Applied Spectroscopy. 38: 343-350. DOI: 10.1366/0003702844555502 |
0.543 |
|
| 1984 |
Deteresa SJ, Allen SR, Farris RJ, Porter RS. Compressive and torsional behaviour of Kevlar 49 fibre . DOI: 10.1007/Bf00552994 |
0.318 |
|
| 1984 |
Pottick LA, Allen SR, Farris RJ. FORCE-TEMPERATURE BEHAVIOR OF RIGID ROD POLYMERIC FIBERS Journal of Applied Polymer Science. 29: 3915-3924. DOI: 10.1002/App.1984.070291224 |
0.412 |
|
| 1983 |
Lyon RE, Farris RJ. THERMODYNAMIC BEHAVIOR OF SOLID POLYMERS IN UNIAXIAL DEFORMATION Polymer Engineering and Science. 24: 908-914. DOI: 10.1002/Pen.760241110 |
0.315 |
|
| 1983 |
Yilmazer U, Farris RJ. Mechanical behavior and dilatation of particulate-filled thermosets in the glassy state Polymer Composites. 4: 1-8. DOI: 10.1002/Pc.750040102 |
0.31 |
|
| 1983 |
Yilmazer U, Farris RJ. MECHANICAL BEHAVIOR AND DILATATION OF PARTICULATE-FILLED THERMOSETS IN THE RUBBERY STATE Journal of Applied Polymer Science. 28: 3369-3386. DOI: 10.1002/App.1983.070281106 |
0.364 |
|
| 1983 |
Yilmazer U, Farris RJ. Physical aging in particulate-filled composites with an amorphous glassy matrix Journal of Applied Polymer Science. 28: 3269-3280. DOI: 10.1002/App.1983.070281021 |
0.38 |
|
| 1983 |
Chacko VP, Farris RJ, Karasz FE. TENSILE PROPERTIES OF CaCO//3-FILLED POLYETHYLENES Journal of Applied Polymer Science. 28: 2701-2713. DOI: 10.1002/App.1983.070280903 |
0.388 |
|
| 1982 |
Burchell DJ, Lasch JE, Farris RJ, Hsu SL. Deformation studies of polymers by time resolved Fourier transform infra-red spectroscopy: 1. Development of the technique Polymer. 23: 965-968. DOI: 10.1016/0032-3861(82)90394-9 |
0.515 |
|
| 1982 |
Chacko VP, Karasz FE, Farris RJ, Thomas EL. Morphology of CaCO3‐filled polyethylenes Journal of Polymer Science Part B. 20: 2177-2195. DOI: 10.1002/Pol.1982.180201202 |
0.306 |
|
| 1982 |
Chacko VP, Karasz FE, Farris RJ. Dynamic mechanical behavior of filled polyethylenes and model composites Polymer Engineering and Science. 22: 968-974. DOI: 10.1002/Pen.760221511 |
0.369 |
|
| 1982 |
Deteresa SJ, Farris RJ, Porter RS. Behavior of an aramid fiber under uniform compression Polymer Composites. 3: 57-58. DOI: 10.1002/Pc.750030202 |
0.447 |
|
| 1981 |
Allen SR, Filippov AG, Farris RJ, Thomas EL, Wong CP, Berry GC, Chenevey EC. Mechanical studies of high-strength, high-modulus poly(p-phenylenebenzobisthiazole) fibers Macromolecules. 14: 1135-1138. DOI: 10.1021/Ma50005A050 |
0.423 |
|
| 1981 |
Allen SR, Filippov AG, Farris RJ, Thomas EL. MACROSTRUCTURE AND MECHANICAL BEHAVIOR OF FIBERS OF POLY-p-PHENYLENE BENZOBISTHIAZOLE Journal of Applied Polymer Science. 26: 291-301. DOI: 10.1002/App.1981.070260127 |
0.4 |
|
| 1979 |
Yang HWH, Farris R, Chien JCW. Study of the effect of regrinding on the cumulative damage to the mechanical properties of fiber-reinforced nylon 66 Journal of Applied Polymer Science. 23: 3375-3382. DOI: 10.1002/App.1979.070231121 |
0.427 |
|
| 1978 |
Griswold PD, Porter RS, Desper CR, Farris RJ. Preparation of ultradrawn polyethylene by a novel radial‐compression method Polymer Engineering and Science. 18: 537-545. DOI: 10.1002/Pen.760180618 |
0.387 |
|
| 1977 |
Farris RJ. Rubber Heat Engines, Analyses and Theory Polymer Engineering and Science. 17: 737-744. DOI: 10.1002/Pen.760171008 |
0.34 |
|
| Show low-probability matches. |