Year |
Citation |
Score |
2020 |
Singh AK, Kumar B, Jha K, Astarita A, Squillace A, Franchitti S, Arora A. Friction stir welding of additively manufactured Ti-6Al-4V: Microstructure and mechanical properties Journal of Materials Processing Technology. 277: 116433. DOI: 10.1016/J.Jmatprotec.2019.116433 |
0.388 |
|
2020 |
Mahesh VP, Kumar A, Arora A. Microstructural Modification and Surface Hardness Improvement in Al-Mo Friction Stir Surface Composites Journal of Materials Engineering and Performance. 29: 5147-5157. DOI: 10.1007/S11665-020-05018-Y |
0.335 |
|
2020 |
Mahesh VP, Gumaste A, Meena N, Alphonsa J, Arora A. Corrosion Behavior of Aluminum Surface Composites with Metallic, Ceramic, and Hybrid Reinforcements Using Friction Stir Processing Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science. 1-16. DOI: 10.1007/S11663-020-01932-7 |
0.327 |
|
2020 |
Pandya S, Gurav S, Hedau G, Saha SK, Arora A. Effect of axial conduction in integral rough friction stir channels: experimental thermo-hydraulic characteristics analyses Heat and Mass Transfer. 56: 1725-1738. DOI: 10.1007/S00231-019-02788-7 |
0.314 |
|
2019 |
Sharma R, Singh AK, Arora A, Pati S, De PS. Effect of friction stir processing on corrosion of Al-TiB2 based composite in 3.5 wt.% sodium chloride solution Transactions of Nonferrous Metals Society of China. 29: 1383-1392. DOI: 10.1016/S1003-6326(19)65045-4 |
0.336 |
|
2019 |
Sahlot P, Singh AK, Badheka VJ, Arora A. Friction Stir Welding of Copper: Numerical Modeling and Validation Transactions of the Indian Institute of Metals. 72: 1339-1347. DOI: 10.1007/S12666-019-01629-9 |
0.47 |
|
2019 |
Oza AD, Kumar A, Badheka V, Arora A. Traveling Wire Electrochemical Discharge Machining (TW-ECDM) of Quartz Using Zinc Coated Brass Wire: Investigations on Material Removal Rate and Kerf Width Characteristics Silicon. 11: 2873-2884. DOI: 10.1007/S12633-019-0070-Y |
0.338 |
|
2019 |
Mahesh VP, Arora A. Effect of Tool Shoulder Diameter on the Surface Hardness of Aluminum-Molybdenum Surface Composites Developed by Single and Double Groove Friction Stir Processing Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 50: 5373-5383. DOI: 10.1007/S11661-019-05410-X |
0.342 |
|
2019 |
Singh AK, Sahlot P, Paliwal M, Arora A. Heat transfer modeling of dissimilar FSW of Al 6061/AZ31 using experimentally measured thermo-physical properties The International Journal of Advanced Manufacturing Technology. 105: 771-783. DOI: 10.1007/S00170-019-04276-Y |
0.462 |
|
2018 |
Sahlot P, Nene SS, Frank M, Mishra RS, Arora A. Towards attaining dissimilar lap joint of CuCrZr alloy and 316L stainless steel using friction stir welding Science and Technology of Welding and Joining. 23: 715-720. DOI: 10.1080/13621718.2018.1499186 |
0.371 |
|
2018 |
Sahlot P, Arora A. Numerical model for prediction of tool wear and worn-out pin profile during friction stir welding Wear. 96-107. DOI: 10.1016/J.Wear.2018.05.007 |
0.453 |
|
2018 |
Tungala V, Arora A, Gwalani B, Mishra RS, Brennan RE, Cho KC. Microstructure and mechanical properties of friction stir processed cast Eglin steel (ES-1) Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 709: 105-114. DOI: 10.1016/J.Msea.2017.10.033 |
0.455 |
|
2018 |
Sahlot P, Jha K, Dey GK, Arora A. Wear-induced changes in FSW tool pin profile: effect of process parameters Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 49: 2139-2150. DOI: 10.1007/S11661-018-4580-9 |
0.418 |
|
2017 |
Sahlot P, Jha K, Dey GK, Arora A. Quantitative wear analysis of H13 steel tool during friction stir welding of Cu-0.8%Cr-0.1%Zr alloy Wear. 378: 82-89. DOI: 10.1016/J.Wear.2017.02.009 |
0.44 |
|
2017 |
Banjare PN, Sahlot P, Arora A. An assisted heating tool design for FSW of thermoplastics Journal of Materials Processing Technology. 239: 83-91. DOI: 10.1016/J.Jmatprotec.2016.07.035 |
0.452 |
|
2016 |
Arora A, Astarita A, Boccarusso L, Mahesh VP. Experimental Characterization of Metal Matrix Composite with Aluminium Matrix and Molybdenum Powders as Reinforcement Procedia Engineering. 167: 245-251. DOI: 10.1016/J.Proeng.2016.11.694 |
0.301 |
|
2016 |
Palanivel S, Arora A, Doherty KJ, Mishra RS. A framework for shear driven dissolution of thermally stable particles during friction stir welding and processing Materials Science and Engineering A. 678: 308-314. DOI: 10.1016/J.Msea.2016.10.015 |
0.378 |
|
2012 |
Manvatkar VD, Arora A, De A, DebRoy T. Neural network models of peak temperature, torque, traverse force, bending stress and maximum shear stress during friction stir welding Science and Technology of Welding and Joining. 17: 460-466. DOI: 10.1179/1362171812Y.0000000035 |
0.592 |
|
2012 |
Debroy T, De A, Bhadeshia HKDH, Manvatkar VD, Arora A. Tool durability maps for friction stir welding of an aluminium alloy Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 468: 3552-3570. DOI: 10.1098/Rspa.2012.0270 |
0.615 |
|
2012 |
Arora A, Mehta M, De A, DebRoy T. Erratum to: Load bearing capacity of tool pin during friction stir welding The International Journal of Advanced Manufacturing Technology. 61: 921-921. DOI: 10.1007/S00170-012-4147-7 |
0.554 |
|
2012 |
Arora A, Mehta M, De A, Debroy T. Load bearing capacity of tool pin during friction stir welding International Journal of Advanced Manufacturing Technology. 61: 911-920. DOI: 10.1007/S00170-011-3759-7 |
0.623 |
|
2011 |
Arora A, De A, Debroy T. Toward optimum friction stir welding tool shoulder diameter Scripta Materialia. 64: 9-12. DOI: 10.1016/J.Scriptamat.2010.08.052 |
0.607 |
|
2011 |
Arora A, Debroy T, Bhadeshia HKDH. Back-of-the-envelope calculations in friction stir welding - Velocities, peak temperature, torque, and hardness Acta Materialia. 59: 2020-2028. DOI: 10.1016/J.Actamat.2010.12.001 |
0.592 |
|
2011 |
Mehta M, Arora A, De A, Debroy T. Tool geometry for friction stir welding - Optimum shoulder diameter Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 42: 2716-2722. DOI: 10.1007/S11661-011-0672-5 |
0.603 |
|
2010 |
Arora A, Roy GG, Debroy T. Cooling rate in 800 to 500°C range from dimensional analysis Science and Technology of Welding and Joining. 15: 423-427. DOI: 10.1179/136217110X12720264008394 |
0.575 |
|
2009 |
Arora A, Zhang Z, De A, DebRoy T. Strains and strain rates during friction stir welding Scripta Materialia. 61: 863-866. DOI: 10.1016/J.Scriptamat.2009.07.015 |
0.485 |
|
2009 |
Arora A, Roy GG, DebRoy T. Unusual wavy weld pool boundary from dimensional analysis Scripta Materialia. 60: 68-71. DOI: 10.1016/J.Scriptamat.2008.08.035 |
0.564 |
|
2009 |
Arora A, Nandan R, Reynolds AP, DebRoy T. Torque, power requirement and stir zone geometry in friction stir welding through modeling and experiments Scripta Materialia. 60: 13-16. DOI: 10.1016/J.Scriptamat.2008.08.015 |
0.587 |
|
Show low-probability matches. |