Year |
Citation |
Score |
2014 |
Kang C, Roh C, Overfelt RA. Pressure-driven deformation with soft polydimethylsiloxane (PDMS) by a regular syringe pump: Challenge to the classical fluid dynamics by comparison of experimental and theoretical results Rsc Advances. 4: 3102-3112. DOI: 10.1039/C3Ra46708B |
0.313 |
|
2014 |
Banerjee P, Overfelt RA. Viscosity Measurements of Industrial Alloys Using the Oscillating Cup Technique International Journal of Thermophysics. 20: 1791-1800. DOI: 10.1023/A:1022670232252 |
0.442 |
|
2013 |
Kang C, Overfelt RA, Roh C. Deformation properties between fluid and periodic circular obstacles in polydimethylsiloxane microchannels: Experimental and numerical investigations under various conditions. Biomicrofluidics. 7: 54102. PMID 24404065 DOI: 10.1063/1.4819918 |
0.317 |
|
2008 |
Teodorescu G, Jones PD, Overfelt RA, Guo B. Normal emissivity of high-purity nickel at temperatures between 1440 and 1605 K Journal of Physics and Chemistry of Solids. 69: 133-138. DOI: 10.1016/J.Jpcs.2007.08.047 |
0.333 |
|
2008 |
Guo B, Teodorescu G, Overfelt RA, Jones PD. Measurements of heat capacity of pure titanium and zirconium by electromagnetic levitation International Journal of Thermophysics. 29: 1997-2005. DOI: 10.1007/S10765-008-0526-6 |
0.336 |
|
2008 |
Williams R, Shao R, Overfelt RA. The flowability of fine powders in reduced gravity conditions Granular Matter. 10: 139-144. DOI: 10.1007/S10035-007-0068-9 |
0.33 |
|
2007 |
Liu XJ, Bhavnani SH, Overfelt RA. Simulation of EPS foam decomposition in the lost foam casting process Journal of Materials Processing Technology. 182: 333-342. DOI: 10.1016/J.Jmatprotec.2006.08.023 |
0.368 |
|
2006 |
Jones PD, Teodorescu G, Overfelt RA. Spectral-directional emittance of CuO at high temperatures Journal of Heat Transfer. 128: 382-388. DOI: 10.1115/Ht-Fed2004-56050 |
0.312 |
|
2006 |
Teodorescu G, Jones PD, Overfelt RA, Guo B. High temperature, spectral-directional emittance of high purity nickel oxidized in air Journal of Materials Science. 41: 7240-7246. DOI: 10.1007/S10853-006-0914-X |
0.351 |
|
2006 |
Teodorescu G, Jones PD, Overfelt RA, Guo B. Spectral-directional emittance of 99.99% aluminum, thermally oxidized below its melting point International Journal of Thermophysics. 27: 554-568. DOI: 10.1007/S10765-005-0009-Y |
0.359 |
|
2005 |
Bakhtiyarov SI, Overfelt RA, Wang D. Thermophysical property measurements on mold materials: Thermal expansion and density International Journal of Thermophysics. 26: 141-149. DOI: 10.1007/S10765-005-2359-X |
0.36 |
|
2004 |
Bakhtiyarov SI, Overfelt RA. Effect of porosity and metallic insertions on electrical resistivity of A2011 aluminium alloy Materials Science and Technology. 20: 790-794. DOI: 10.1179/026708304225016752 |
0.354 |
|
2004 |
Bakhtiyarov S, Suryawanshi A, Overfelt RA, Capps J. Numerical simulations and experimental study of hot core distortion phenomenon in aluminum casting Proceedings of the Asme Heat Transfer/Fluids Engineering Summer Conference 2004, Ht/Fed 2004. 3: 1025-1034. DOI: 10.1115/Ht-Fed2004-56510 |
0.38 |
|
2004 |
Meir AJ, Schmidt PG, Bakhtiyarov SI, Overfelt RA. Numerical simulation of steady liquid-metal flow in the presence of a static magnetic field Journal of Applied Mechanics, Transactions Asme. 71: 786-795. DOI: 10.1115/1.1796450 |
0.414 |
|
2004 |
Bakhtiyarov SI, Dupac M, Overfelt RA, Teodorescu SG. On electrical conductivity measurements of molten metals by inductive technique Journal of Fluids Engineering, Transactions of the Asme. 126: 468-470. DOI: 10.1115/1.1760542 |
0.789 |
|
2004 |
Bakhtiyarov SI, Overfelt RA, Teodorescu SG. Fraction solid measurements on solidifying melt Journal of Fluids Engineering, Transactions of the Asme. 126: 193-197. DOI: 10.1115/1.1677450 |
0.797 |
|
2004 |
Bakhtiyarov SI, Capps J, Suryawanshi A, Overfelt RA. Vacuum-sealed aluminum step casting Solidification of Aluminum Alloys. 387-398. |
0.321 |
|
2003 |
Bakhtiyarov SI, Overfelt RA, Teodorescu SG. Electrical resistivity measurements on binary Al - 15 wt-%In alloy Materials Science and Technology. 19: 322-326. DOI: 10.1179/026708303225010740 |
0.777 |
|
2003 |
Bakhtiyarov SI, Overfelt RA. CFD simulation of fluid flow through porous media: Application to decomposed gases flow through foam pattern in lost foam casting American Society of Mechanical Engineers, Materials Division (Publication) Md. 98: 39-44. DOI: 10.1115/Imece2003-43500 |
0.336 |
|
2003 |
Bakhtiyarov SI, Overfelt RA, Meir AJ, Schmidt PG. Experimental measurements of velocity, potential, and temperature distributions in liquid aluminum during electromagnetic stirring Journal of Applied Mechanics, Transactions Asme. 70: 351-358. DOI: 10.1115/1.1558082 |
0.457 |
|
2003 |
Basak D, Overfelt RA, Wang D. Measurement of specific heat capacity and electrical resistivity of industrial alloys using pulse heating techniques International Journal of Thermophysics. 24: 1721-1733. DOI: 10.1023/B:Ijot.0000004101.88449.86 |
0.416 |
|
2003 |
Bakhtiyarov SI, Overfelt RA. CFD modeling and experimental study of resin-bonded sand/air two-phase flow in sand coremaking process Powder Technology. 133: 68-78. DOI: 10.1016/S0032-5910(03)00081-0 |
0.324 |
|
2003 |
Bakhtiyarov SI, Overfelt RA, Teodorescu SG. Electrical and thermal conductivity measurements on commercial magnesium alloys Tms Annual Meeting. 129-134. |
0.786 |
|
2002 |
Bakhtiyarov SI, Overfelt RA. Thermophysical property measurements by electromagnetic levitation melting technique under microgravity. Annals of the New York Academy of Sciences. 974: 132-45. PMID 12446320 DOI: 10.1111/J.1749-6632.2002.Tb05903.X |
0.405 |
|
2002 |
Bakhtiyarov SI, Overfelt RA. Stability of mushy state in magnetic field during electrical conductivity measurements using rotational technique Asme International Mechanical Engineering Congress and Exposition, Proceedings. 161-163. DOI: 10.1115/IMECE2002-32279 |
0.336 |
|
2002 |
Bakhtiyarov SI, Overfelt RA, Teodorescu SG. Fraction solid measurements on A319 aluminum alloy Asme International Mechanical Engineering Congress and Exposition, Proceedings. 587-593. DOI: 10.1115/IMECE2002-32246 |
0.803 |
|
2002 |
Bakhtiyarov SI, Dupac M, Overfelt RA, Teodorescu SG. Fluid flow effect in electrical conductivity measurements of molten metals by inductive technique American Society of Mechanical Engineers, Fluids Engineering Division (Publication) Fed. 257: 21-24. DOI: 10.1115/FEDSM2002-31446 |
0.792 |
|
2002 |
Overfelt RA, Bakhtiyarov SI, Taylor RE. Thermophysical properties of A201, A319, and A356 aluminium casting alloys High Temperatures - High Pressures. 34: 401-409. DOI: 10.1068/Htjr052 |
0.439 |
|
2002 |
Li L, Overfelt RA. Influence of directional solidification variables on the cellular and primary dendrite arm spacings of PWA1484 Journal of Materials Science. 37: 3521-3532. DOI: 10.1023/A:1016527509815 |
0.398 |
|
2002 |
Wang D, Overfelt RA. Oscillating Cup Viscosity Measurements of Aluminum Alloys: A201, A319 and A356 International Journal of Thermophysics. 23: 1063-1076. DOI: 10.1023/A:1016342120174 |
0.409 |
|
2002 |
Liu Y, Bakhtiyarov SI, Overfelt RA. Numerical modeling and experimental verification of mold filling and evolved gas pressure in lost foam casting process Journal of Materials Science. 37: 2997-3003. DOI: 10.1023/A:1016029300243 |
0.389 |
|
2002 |
Bakhtiyarov SI, Overfelt RA. Thermoviscoelastic Properties of Phenolic Resin/Polymeric Isocyanate Binder Systems International Journal of Thermophysics. 23: 221-233. DOI: 10.1023/A:1013917413611 |
0.332 |
|
2002 |
Hudson N, Bhavnani SH, Overfelt RA. Computational fluid-dynamics modeling of the hydrodynamics of fluidization in the sand surrounding a lost-foam casting pattern Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 33: 565-575. DOI: 10.1007/S11663-002-0036-Z |
0.33 |
|
2001 |
Bakhtiyarov SI, Overfelt RA, Teodorescu SG. Electrical and thermal conductivity of A319 and A356 aluminum alloys Journal of Materials Science. 36: 4643-4648. DOI: 10.1023/A:1017946130966 |
0.776 |
|
2001 |
Teodorescu SG, Overfelt RA, Bakhtiyarov SI. An inductive technique for electrical conductivity measurements on molten metals International Journal of Thermophysics. 22: 1521-1535. DOI: 10.1023/A:1012809524286 |
0.783 |
|
2001 |
Whitesell HS, Overfelt RA. Influence of solidification variables on the microstructure, macrosegregation, and porosity of directionally solidified Mar-M247 Materials Science and Engineering A. 318: 264-276. DOI: 10.1016/S0921-5093(01)01264-3 |
0.725 |
|
2001 |
Ciocirlan BO, Beale DG, Overfelt RA. Simulation of motion of an electromagnetically levitated sphere Journal of Sound and Vibration. 242: 559-575. DOI: 10.1006/Jsvi.2000.3377 |
0.374 |
|
2000 |
Bakhtiyarov SI, Overfelt RA. Rheology of refractory coating materials used in lost foam casting process Journal of Elastomers and Plastics. 32: 73-85. DOI: 10.1177/009524430003200106 |
0.349 |
|
2000 |
Whitesell HS, Li L, Overfelt RA. Influence of solidification variables on the dendrite arm spacings of Ni-based superalloys Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 31: 546-551. DOI: 10.1007/S11663-000-0162-4 |
0.717 |
|
2000 |
Teodorescu SG, Dupac M, Bakhtiyarov SI, Overfelt RA. Numerical simulations of fluid flow during electromagnetic stirring of metals American Society of Mechanical Engineers, Fluids Engineering Division (Publication) Fed. 255: 159-163. |
0.788 |
|
1999 |
Bakhtiyarov SI, Overfelt RA, Teodorescu S. Simultaneous measurements of local velocities and temperature in liquid metals by permanent-magnet potential probe Sae Technical Papers. DOI: 10.4271/1999-01-2508 |
0.365 |
|
1999 |
Bakhtiyarov SI, Overfelt RA. Electrical conductivity measurements in liquid metals by rotational technique Journal of Materials Science. 34: 945-949. DOI: 10.1023/A:1004523407095 |
0.483 |
|
1999 |
Bakhtiyarov SI, Overfelt RA. Measurement of liquid metal viscosity by rotational technique Acta Materialia. 47: 4311-4319. DOI: 10.1016/S1359-6454(99)00307-9 |
0.415 |
|
1999 |
Lewandowski MS, Overfelt RA. High temperature deformation behavior of solid and semi-solid alloy 718 Acta Materialia. 47: 4695-4710. DOI: 10.1016/S1359-6454(99)00252-9 |
0.404 |
|
1999 |
Bakhtiyarov SI, Overfelt RA. Rheology of solid-liquid suspensions in reduced gravity Powder Technology. 104: 151-156. DOI: 10.1016/S0032-5910(99)00061-3 |
0.342 |
|
1999 |
Bakhtiyarov SI, Meir AJ, Overfelt RA, Schmidt PG. Velocity, potential, and temperature distributions in molten metals during electromagnetic stirring. Part I: experimental measurements American Society of Mechanical Engineers, Fluids Engineering Division (Publication) Fed. 249: 127-135. |
0.373 |
|
1999 |
Meir AJ, Bakhtiyarov SI, Schmidt PG, Overfelt RA. Velocity, potential, and temperature distributions in molten metals during electromagnetic stirring. Part II: numerical simulations American Society of Mechanical Engineers, Fluids Engineering Division (Publication) Fed. 249: 87-96. |
0.3 |
|
1999 |
Bakhtiyarov SI, Overfelt RA. Rheological measurements on molten metals American Society of Mechanical Engineers, Fluids Engineering Division (Publication) Fed. 249: 21-29. |
0.312 |
|
1999 |
Bakhtiyarov SI, Overfelt RA. Rotational technique for liquid metals viscosity measurements Proceedings of the 1999 3rd Asme/Jsme Joint Fluids Engineering Conference, Fedsm'99, San Francisco, California, Usa, 18-23 July 1999 (Cd-Rom). 1. |
0.304 |
|
1998 |
Bakhtiyarov SI, Overfelt RA. Rheological and thermal characteristics of technikure® binder system used in core-box process Journal of Elastomers and Plastics. 30: 328-339. DOI: 10.1177/009524439803000405 |
0.369 |
|
1998 |
Bakhtiyarov SI, Overfelt RA. Rheological study of phenolic-urethane-amine process Journal of Elastomers and Plastics. 30: 11-27. DOI: 10.1177/009524439803000102 |
0.306 |
|
1998 |
Bakhtiyarov SI, Overfelt RA. Three-zone liquid metals solidification model Journal of Materials Science Letters. 17: 2029-2031. DOI: 10.1023/A:1006633311446 |
0.327 |
|
1998 |
Bakhtiyarov SI, Overfelt RA. Fluidized bed viscosity measurements in reduced gravity Powder Technology. 99: 53-59. DOI: 10.1016/S0032-5910(98)00090-4 |
0.355 |
|
1998 |
Rong-Jiunn SU, Overfelt RA, Jemian WA. Microstructural and compositional transients during accelerated directional solidification of AI-4.5 Wt pet Cu Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 29: 2375-2381. DOI: 10.1007/S11661-998-0113-2 |
0.394 |
|
1997 |
Bakhtiyarov SI, Overfelt RA. Study of rheological properties of ISOCURE ® LF-305/904 G binder system Journal of Elastomers and Plastics. 29: 314-325. DOI: 10.1177/009524439702900404 |
0.348 |
|
1997 |
Su RJ, Jemian WA, Overfelt RA. Transient effects in the directional solidification of Al-Cu alloys Journal of Crystal Growth. 179: 625-634. DOI: 10.1016/S0022-0248(97)00162-0 |
0.409 |
|
1996 |
Overfelt RA, Matlock CA, Wells ME. Viscosity of superalloy 718 by the oscillating vessel technique Metallurgical and Materials Transactions B. 27: 698-701. DOI: 10.1007/Bf02915672 |
0.422 |
|
1995 |
Overfelt RA, Taylor RE. A review of earth-based and proposed space-based techniques to measure the thermophysicai properties of molten metals 1995 Space Programs and Technologies Conference. 1-8. |
0.32 |
|
Show low-probability matches. |