| Year |
Citation |
Score |
| 2020 |
Shyam A, Plotkowski A, Bahl S, Sisco K, Allard LF, Yang Y, Haynes JA, Dehoff RR. An additively manufactured AlCuMnZr alloy microstructure and tensile mechanical properties Materialia. 12: 100758. DOI: 10.1016/J.Mtla.2020.100758 |
0.401 |
|
| 2020 |
Bahl S, Hu X, Hoar E, Cheng J, Haynes JA, Shyam A. Effect of copper content on the tensile elongation of Al–Cu–Mn–Zr alloys: Experiments and finite element simulations Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 772: 138801. DOI: 10.1016/J.Msea.2019.138801 |
0.476 |
|
| 2020 |
Milligan BK, Roy S, Hawkins CS, Allard LF, Shyam A. Impact of microstructural stability on the creep behavior of cast Al–Cu alloys Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 772: 138697. DOI: 10.1016/J.Msea.2019.138697 |
0.405 |
|
| 2020 |
Yang Y, Bahl S, Sisco K, Lance M, Shin D, Shyam A, Plotkowski A, Dehoff RR. Primary solidification of ternary compounds in Al-rich Al–Ce–Mn alloys Journal of Alloys and Compounds. 844: 156048. DOI: 10.1016/J.Jallcom.2020.156048 |
0.317 |
|
| 2020 |
Bahl S, Hu X, Sisco K, Haynes JA, Shyam A. Influence of copper content on the high temperature tensile and low cycle fatigue behavior of cast Al-Cu-Mn-Zr alloys International Journal of Fatigue. 140: 105836. DOI: 10.1016/J.Ijfatigue.2020.105836 |
0.487 |
|
| 2020 |
Plotkowski A, Sisco K, Bahl S, Shyam A, Yang Y, Allard L, Nandwana P, Rossy AM, Dehoff RR. Microstructure and properties of a high temperature Al–Ce–Mn alloy produced by additive manufacturing Acta Materialia. 196: 595-608. DOI: 10.1016/J.Actamat.2020.07.014 |
0.403 |
|
| 2020 |
Poplawsky JD, Milligan BK, Allard LF, Shin D, Shower P, Chisholm MF, Shyam A. The synergistic role of Mn and Zr/Ti in producing θ′/L12 co-precipitates in Al-Cu alloys Acta Materialia. 194: 577-586. DOI: 10.1016/J.Actamat.2020.05.043 |
0.369 |
|
| 2019 |
Allard LF, Leonard DN, Poplawsky JD, Chisholm MF, Eckhart BD, Shyam A, Walden FS, Larson BB, Kelly R, Stokes A, Bigelow WC. The Utility of Xe-Plasma FIB for Preparing Aluminum Alloy Specimens for MEMS-based In Situ Double-Tilt Heating Experiments Microscopy and Microanalysis. 25: 1442-1443. DOI: 10.1017/S1431927619007943 |
0.335 |
|
| 2019 |
Pierce D, Haynes A, Hughes J, Graves R, Maziasz P, Muralidharan G, Shyam A, Wang B, England R, Daniel C. High temperature materials for heavy duty diesel engines: Historical and future trends Progress in Materials Science. 103: 109-179. DOI: 10.1016/J.Pmatsci.2018.10.004 |
0.33 |
|
| 2019 |
Shower P, Morris J, Shin D, Radhakrishnan B, Poplawsky J, Shyam A. Mechanisms for stabilizing θ′(Al2Cu) precipitates at elevated temperatures investigated with phase field modeling Materialia. 6: 100335. DOI: 10.1016/J.Mtla.2019.100335 |
0.372 |
|
| 2019 |
Shower P, Morris JR, Shin D, Radhakrishnan B, Allard LF, Shyam A. Temperature-dependent stability of θ′-Al2Cu precipitates investigated with phase field simulations and experiments Materialia. 5: 100185. DOI: 10.1016/J.Mtla.2018.100185 |
0.355 |
|
| 2019 |
Shyam A, Roy S, Shin D, Poplawsky J, Allard L, Yamamoto Y, Morris J, Mazumder B, Idrobo J, Rodriguez A, Watkins T, Haynes J. Elevated temperature microstructural stability in cast AlCuMnZr alloys through solute segregation Materials Science and Engineering: A. 765: 138279. DOI: 10.1016/J.Msea.2019.138279 |
0.397 |
|
| 2019 |
Wang J, Shin S, Nobakht AY, Shyam A. Structural deformation and transformation of θ′-Al2Cu precipitate in Al matrix via interfacial diffusion Computational Materials Science. 156: 111-120. DOI: 10.1016/J.Commatsci.2018.09.024 |
0.312 |
|
| 2019 |
Bruno G, Kachanov M, Sevostianov I, Shyam A. Micromechanical modeling of non-linear stress-strain behavior of polycrystalline microcracked materials under tension Acta Materialia. 164: 50-59. DOI: 10.1016/J.Actamat.2018.10.024 |
0.399 |
|
| 2018 |
Müller BR, Cooper RC, Lange A, Kupsch A, Wheeler M, Hentschel MP, Staude A, Pandey A, Shyam A, Bruno G. Stress-induced microcrack density evolution in β-eucryptite ceramics: Experimental observations and possible route to strain hardening Acta Materialia. 144: 627-641. DOI: 10.1016/J.Actamat.2017.10.030 |
0.404 |
|
| 2018 |
Sabau AS, Mirmiran S, Glaspie C, Li S, Apelian D, Shyam A, Haynes JA, Rodriguez AF. Hot-Tearing Assessment of Multicomponent Nongrain-Refined Al-Cu Alloys for Permanent Mold Castings Based on Load Measurements in a Constrained Mold Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science. 49: 1267-1287. DOI: 10.1007/S11663-018-1204-0 |
0.388 |
|
| 2018 |
Bahl S, Dryepondt S, Allard LF, Suwas S, Shyam A. Retardation of Small Creep-Fatigue Crack in Gr. 91 Steel Through the Combined Effects of Stress Relaxation, Microstructural Evolution, and Oxidation Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 49: 6110-6121. DOI: 10.1007/S11661-018-4947-Y |
0.497 |
|
| 2018 |
Cakmak E, Sridharan N, Venkatakrishnan SV, Bilheux HZ, Santodonato LJ, Shyam A, Babu SS. Feasibility Study of Making Metallic Hybrid Materials Using Additive Manufacturing Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 49: 5035-5041. DOI: 10.1007/S11661-018-4741-X |
0.329 |
|
| 2017 |
Shin D, Lee S, Shyam A, Haynes JA. Petascale supercomputing to accelerate the design of high-temperature alloys. Science and Technology of Advanced Materials. 18: 828-838. PMID 29379579 DOI: 10.1080/14686996.2017.1371559 |
0.319 |
|
| 2017 |
Shower P, Roy S, Hawkins CS, Shyam A. The effects of microstructural stability on the compressive response of two cast aluminum alloys up to 300 °C Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 700: 519-529. DOI: 10.1016/J.Msea.2017.06.024 |
0.415 |
|
| 2017 |
Pawlowski AE, Cordero ZC, French MR, Muth TR, Carver JK, Dinwiddie RB, Elliott AM, Shyam A, Splitter DA. Damage-tolerant metallic composites via melt infiltration of additively manufactured preforms Materials & Design. 127: 346-351. DOI: 10.1016/J.Matdes.2017.04.072 |
0.329 |
|
| 2017 |
Shin D, Roy S, Watkins TR, Shyam A. Lattice mismatch modeling of aluminum alloys Computational Materials Science. 138: 149-159. DOI: 10.1016/J.Commatsci.2017.06.021 |
0.343 |
|
| 2017 |
Shin D, Shyam A, Lee S, Yamamoto Y, Haynes JA. Solute segregation at the Al/θ′-Al2Cu interface in Al-Cu alloys Acta Materialia. 141: 327-340. DOI: 10.1016/J.Actamat.2017.09.020 |
0.331 |
|
| 2017 |
Cooper RC, Bruno G, Wheeler MR, Pandey A, Watkins TR, Shyam A. Effect of microcracking on the uniaxial tensile response of β-eucryptite ceramics: Experiments and constitutive model Acta Materialia. 135: 361-371. DOI: 10.1016/J.Actamat.2017.06.033 |
0.362 |
|
| 2017 |
Roy S, Allard LF, Rodriguez A, Porter WD, Shyam A. Comparative Evaluation of Cast Aluminum Alloys for Automotive Cylinder Heads: Part II—Mechanical and Thermal Properties Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 48: 2543-2562. DOI: 10.1007/S11661-017-3986-0 |
0.381 |
|
| 2017 |
Roy S, Allard LF, Rodriguez A, Watkins TR, Shyam A. Comparative Evaluation of Cast Aluminum Alloys for Automotive Cylinder Heads: Part I-Microstructure Evolution Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 48: 2529-2542. DOI: 10.1007/S11661-017-3985-1 |
0.351 |
|
| 2016 |
Pandey A, Wheeler R, Shyam A, Stoughton TB. Onset of Plasticity via Relaxation Analysis (OPRA) Experimental Mechanics. 1-13. DOI: 10.1007/S11340-016-0152-3 |
0.329 |
|
| 2015 |
Shyam A, Bruno G, Watkins TR, Pandey A, Lara-Curzio E, Parish CM, Stafford RJ. The effect of porosity and microcracking on the thermomechanical properties of cordierite Journal of the European Ceramic Society. 35: 4557-4566. DOI: 10.1016/J.Jeurceramsoc.2015.08.014 |
0.476 |
|
| 2015 |
Wheeler R, Pandey A, Shyam A, Tan T, Lara-Curzio E. Small Scale Mechanical Characterization of Thin Foil Materials via Pin Load Microtesting Experimental Mechanics. 55: 1375-1387. DOI: 10.1007/S11340-015-0020-6 |
0.364 |
|
| 2014 |
Shyam A, Hawkins S, Erdman D, England R, Muralidharan G. Constrained thermal fatigue performance of several cast ferrous alloys Materials Science Forum. 783: 2388-2393. DOI: 10.4028/Www.Scientific.Net/Msf.783-786.2388 |
0.444 |
|
| 2014 |
Dwivedi G, Viswanathan V, Sampath S, Shyam A, Lara-Curzio E. Fracture toughness of plasma-sprayed thermal barrier ceramics: Influence of processing, microstructure, and thermal aging Journal of the American Ceramic Society. 97: 2736-2744. DOI: 10.1111/Jace.13021 |
0.374 |
|
| 2014 |
Pandey A, Shyam A, Watkins TR, Lara-Curzio E, Stafford RJ, Hemker KJ. The uniaxial tensile response of porous and microcracked ceramic materials Journal of the American Ceramic Society. 97: 899-906. DOI: 10.1111/Jace.12720 |
0.345 |
|
| 2014 |
Shyam A, Blau P, Jordan T, Yang N. Effect of submillimeter size holes on the fatigue limit of a high strength tool steel Fatigue and Fracture of Engineering Materials and Structures. 37: 368-379. DOI: 10.1111/Ffe.12119 |
0.397 |
|
| 2014 |
Moore AR, Torbet CJ, Shyam A, Jones JW, Walukas DM, Decker RF. Fatigue Behavior of Thixomolded® Magnesium AZ91D Using Ultrasonic Techniques Essential Readings in Magnesium Technology. 227-232. DOI: 10.1007/978-3-319-48099-2_38 |
0.505 |
|
| 2014 |
Shyam A, Hawkins S, Erdman D, England R, Muralidharan G. Constrained thermal fatigue performance of several cast ferrous alloys Materials Science Forum. 783: 2388-2393. |
0.343 |
|
| 2013 |
Shyam A, Jha SK, Caton MJ. Preface to special issue on fatigue and microstructure International Journal of Fatigue. 57: 1. DOI: 10.1016/J.Ijfatigue.2013.06.008 |
0.446 |
|
| 2013 |
Chen Z, Shyam A, Huang J, Decker RF, Lebeau SE, Boehlert CJ. The small fatigue crack growth behavior of an AM60 magnesium alloy Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 44: 1045-1058. DOI: 10.1007/S11661-012-1449-1 |
0.536 |
|
| 2012 |
Shyam A, Lara-Curzio E, Pandey A, Watkins TR, More KL. The thermal expansion, elastic and fracture properties of porous cordierite at elevated temperatures Journal of the American Ceramic Society. 95: 1682-1691. DOI: 10.1111/J.1551-2916.2012.05125.X |
0.44 |
|
| 2012 |
Trejo R, Lara-Curzio E, Shyam A, Kirkham MJ, Garcia-Negron V, Wang Y. Physical and Mechanical Properties of Barium Alkali Silicate Glasses for SOFC Sealing Applications International Journal of Applied Glass Science. 3: 369-379. DOI: 10.1111/Ijag.12004 |
0.306 |
|
| 2012 |
Shyam A, Muth J, Lara-Curzio E. Elastic properties of β-eucryptite in the glassy and microcracked crystalline states Acta Materialia. 60: 5867-5876. DOI: 10.1016/J.Actamat.2012.07.028 |
0.367 |
|
| 2012 |
Bruno G, Garlea VO, Muth J, Efremov AM, Watkins TR, Shyam A. Microstrain temperature evolution in β-eucryptite ceramics: Measurement and model Acta Materialia. 60: 4982-4996. DOI: 10.1016/J.Actamat.2012.04.033 |
0.367 |
|
| 2011 |
Chou YS, Thomsen EC, Williams RT, Choi JP, Canfield NL, Bonnett JF, Stevenson JW, Shyam A, Lara-Curzio E. Compliant alkali silicate sealing glass for solid oxide fuel cell applications: Thermal cycle stability and chemical compatibility Journal of Power Sources. 196: 2709-2716. DOI: 10.1016/J.Jpowsour.2010.11.020 |
0.35 |
|
| 2010 |
Gordon T, Shyam A, Lara-Curzio E. The relationship between microstructure and fracture toughness for fibrous materials for diesel particulate filters Journal of the American Ceramic Society. 93: 1120-1126. DOI: 10.1111/J.1551-2916.2009.03524.X |
0.36 |
|
| 2010 |
Shyam A, Lara-Curzio E. A model for the formation of fatigue striations and its relationship with small fatigue crack growth in an aluminum alloy International Journal of Fatigue. 32: 1843-1852. DOI: 10.1016/J.Ijfatigue.2010.05.005 |
0.521 |
|
| 2010 |
Tan Y, Shyam A, Choi WB, Lara-Curzio E, Sampath S. Anisotropic elastic properties of thermal spray coatings determined via resonant ultrasound spectroscopy Acta Materialia. 58: 5305-5315. DOI: 10.1016/J.Actamat.2010.06.003 |
0.301 |
|
| 2008 |
Corral EL, Cesarano J, Shyam A, Lara-Curzio E, Bell N, Stuecker J, Perry N, Di Prima M, Munir Z, Garay J, Barrera EV. Engineered nanostructures for multifunctional single-walled carbon nanotube reinforced silicon nitride nanocomposites Journal of the American Ceramic Society. 91: 3129-3137. DOI: 10.1111/J.1551-2916.2008.02533.X |
0.359 |
|
| 2008 |
Shyam A, Lara-Curzio E, Watkins TR, Parten RJ. Mechanical characterization of diesel particulate filter substrates Journal of the American Ceramic Society. 91: 1995-2001. DOI: 10.1111/J.1551-2916.2008.02381.X |
0.386 |
|
| 2007 |
Shyam A, Allison JE, Szczepanski CJ, Pollock TM, Jones JW. Small fatigue crack growth in metallic materials: A model and its application to engineering alloys Acta Materialia. 55: 6606-6616. DOI: 10.1016/J.Actamat.2007.08.022 |
0.638 |
|
| 2006 |
Zhu X, Shyam A, Jones JW, Mayer H, Lasecki JV, Allison JE. Effects of microstructure and temperature on fatigue behavior of E319-T7 cast aluminum alloy in very long life cycles International Journal of Fatigue. 28: 1566-1571. DOI: 10.1016/J.Ijfatigue.2005.04.016 |
0.548 |
|
| 2006 |
Shyam A, Lara-Curzio E. The double-torsion testing technique for determination of fracture toughness and slow crack growth behavior of materials: A review Journal of Materials Science. 41: 4093-4104. DOI: 10.1007/S10853-005-5553-0 |
0.442 |
|
| 2005 |
Shyam A, Allison JE, Jones JW. A small fatigue crack growth relationship and its application to cast aluminum Acta Materialia. 53: 1499-1509. DOI: 10.1016/J.Actamat.2004.12.004 |
0.535 |
|
| 2005 |
Shyam A, Milligan WW. A model for slip irreversibility, and its effect on the fatigue crack propagation threshold in a nickel-base superalloy Acta Materialia. 53: 835-844. DOI: 10.1016/J.Actamat.2004.10.036 |
0.732 |
|
| 2005 |
Shyam A, Allison JE, Jones JW. Modeling small fatigue crack growth in cast aluminum alloys 11th International Conference On Fracture 2005, Icf11. 4: 2860-2865. |
0.407 |
|
| 2005 |
Szczepanski CJ, Shyam A, Jha SK, Torbet CJ, Johnson SJ. Characterization of the role of microstructure on the fatigue life of Ti-6Al-2Sn-4Zr-6Mo using ultrasonic fatigue Materials Damage Prognosis - Proceedings of a Symposium of the Materials Science and Technology 2004 Conference. 315-320. |
0.451 |
|
| 2005 |
Shyam A, Torbet CJ, Szczepanski CJ, Jha SK, Caton MJ, Pollock TM. Ultrasonic fatigue of a nickel-base turbine disk alloy at room and elevated temperatures Materials Damage Prognosis - Proceedings of a Symposium of the Materials Science and Technology 2004 Conference. 247-252. |
0.469 |
|
| 2004 |
Shyam A, Torbet CJ, Jha SK, Larsen JM, Caton MJ, Szczepanski CJ, Pollock TM, Jones JW. Development of ultrasonic fatigue for rapid, high temperature fatigue studies in turbine engine materials Proceedings of the International Symposium On Superalloys. 259-268. DOI: 10.7449/2004/Superalloys_2004_259_268 |
0.549 |
|
| 2004 |
Shyam A, Picard YN, Jones JW, Allison JE, Yalisove SM. Small fatigue crack propagation from micronotches in the cast aluminum alloy W319 Scripta Materialia. 50: 1109-1114. DOI: 10.1016/J.Scriptamat.2004.01.031 |
0.523 |
|
| 2004 |
Shyam A, Milligan WW. Effects of deformation behavior on fatigue fracture surface morphology in a nickel-base superalloy Acta Materialia. 52: 1503-1513. DOI: 10.1016/J.Actamat.2003.11.032 |
0.728 |
|
| 2002 |
Shyam A, Padula SA, Marras SI, Milligan WW. Fatigue-crack-propagation thresholds in a nickel-base superalloy at high frequencies and temperatures Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 33: 1949-1962. DOI: 10.1007/S11661-002-0028-2 |
0.743 |
|
| 1999 |
Jena AK, Shyam A, Chaturvedi MC. Growth of recrystallising grains in boron doped Ni76 Al24 Materials Science and Technology. 15: 53-56. DOI: 10.1179/026708399773002818 |
0.322 |
|
| 1999 |
Padula SA, Shyam A, Ritchie RO, Milligan WW. High frequency fatigue crack propagation behavior of a nickel-base turbine disk alloy International Journal of Fatigue. 21: 725-731. DOI: 10.1016/S0142-1123(99)00036-5 |
0.743 |
|
| 1999 |
Lee JK, Hiratani M, Kalaitzidou K, Shyam A. Coherency strain-induced ordering in substitutional alloys Metals and Materials. 5: 519-523. DOI: 10.1007/Bf03026298 |
0.311 |
|
| Show low-probability matches. |