Year |
Citation |
Score |
2020 |
Fu S, Yu D, Chen Y, An K, Chen X. Size effect in stainless steel thin wires under tension Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 790: 139686. DOI: 10.1016/J.Msea.2020.139686 |
0.366 |
|
2020 |
Bedekar V, Voothaluru R, Yu D, Wong A, Galindo-Nava E, Gorti SB, An K, Hyde RS. Effect of nickel on the kinematic stability of retained austenite in carburized bearing steels – In-situ neutron diffraction and crystal plasticity modeling of uniaxial tension tests in AISI 8620, 4320 and 3310 steels International Journal of Plasticity. 131: 102748. DOI: 10.1016/J.Ijplas.2020.102748 |
0.391 |
|
2020 |
Lam T, Wu S, Chae H, Chen S, Jain J, Lee SY, An K, Vogel SC, Chiu S, Yu D, Huang E. Phase Stress Partition in Gray Cast Iron Using In Situ Neutron Diffraction Measurements Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 51: 5029-5035. DOI: 10.1007/S11661-020-05933-8 |
0.361 |
|
2019 |
Zhao Z, Yu D, Chen G, Chen X. Ratcheting‐fatigue behaviour of bainite 2.25Cr1MoV steel with tensile and compressed hold loading at 455°C Fatigue & Fracture of Engineering Materials & Structures. 42: 1937-1949. DOI: 10.1111/Ffe.13045 |
0.382 |
|
2019 |
Zhao Z, Yu D, Chen X. Creep-ratcheting-fatigue life prediction of bainitic 2.25Cr1MoV steel Procedia Structural Integrity. 17: 555-561. DOI: 10.1016/J.Prostr.2019.08.074 |
0.393 |
|
2019 |
Huang E, Lee SY, Jain J, Tong Y, An K, Tsou N, Lam T, Yu D, Chae H, Chen S, Chen S, Chou H. Hardening steels by the generation of transient phase using additive manufacturing Intermetallics. 109: 60-67. DOI: 10.1016/J.Intermet.2019.03.004 |
0.343 |
|
2019 |
Xing R, Yu D, Shi S, Chen X. Cyclic deformation of 316L stainless steel and constitutive modeling under non-proportional variable loading path International Journal of Plasticity. 120: 127-146. DOI: 10.1016/J.Ijplas.2019.04.016 |
0.398 |
|
2019 |
Li Y, Yu D, Li B, Chen X. Martensitic transformation of an austenitic stainless steel under non-proportional cyclic loading International Journal of Fatigue. 124: 338-347. DOI: 10.1016/J.Ijfatigue.2019.03.020 |
0.403 |
|
2018 |
Fu S, Bei H, Chen Y, Liu TK, Yu D, An K. Deformation mechanisms and work-hardening behavior of transformation-induced plasticity high entropy alloys by in -situ neutron diffraction Materials Research Letters. 6: 620-626. DOI: 10.1080/21663831.2018.1523239 |
0.334 |
|
2018 |
Liu Z, Chen X, Yu D, Wang X. Analysis of semi-elliptical surface cracks in the interface of bimaterial plates under tension and bending Theoretical and Applied Fracture Mechanics. 93: 155-169. DOI: 10.1016/J.Tafmec.2017.07.019 |
0.332 |
|
2018 |
Xing R, Yu D, Xie G, Yang Z, Wang X, Chen X. Effect of thermal aging on mechanical properties of a bainitic forging steel for reactor pressure vessel Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 720: 169-175. DOI: 10.1016/J.Msea.2018.02.036 |
0.362 |
|
2018 |
Chen X, Ren B, Yu D, Xu B, Zhang Z, Chen G. Uniaxial low cycle fatigue behavior for pre-corroded 16MND5 bainitic steel in simulated pressurized water reactor environment Journal of Nuclear Materials. 504: 267-276. DOI: 10.1016/J.Jnucmat.2018.03.042 |
0.378 |
|
2018 |
Liu Z, Yu D, Tang J, Chen X, Wang X. Stress intensity factor and T-stress solutions for three-dimensional clamped single edge notched tension (SENT) specimens International Journal of Pressure Vessels and Piping. 168: 11-23. DOI: 10.1016/J.Ijpvp.2018.08.006 |
0.34 |
|
2018 |
Chen X, Shen Y, Fu S, Yu D, Zhang Z, Chen G. Size effects on uniaxial tension and multiaxial ratcheting of oligo-crystalline stainless steel thin wires International Journal of Fatigue. 116: 163-171. DOI: 10.1016/J.Ijfatigue.2018.06.018 |
0.43 |
|
2018 |
Yu D, Huang L, Chen Y, Komolwit P, An K. Real-Time In Situ Neutron Diffraction Investigation of Phase-Specific Load Sharing in a Cold-Rolled TRIP Sheet Steel Jom. 70: 1576-1586. DOI: 10.1007/S11837-018-2947-4 |
0.407 |
|
2017 |
Yang H, Yu D, Chen Y, Mu J, Wang YD, An K. In-situ TOF neutron diffraction studies of cyclic softening in superelasticity of a NiFeGaCo shape memory alloy Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 680: 324-328. DOI: 10.1016/J.Msea.2016.10.078 |
0.419 |
|
2017 |
Yu D, Wang J, Hu W, Guo R. Preparation and controlled release behavior of halloysite/2-mercaptobenzothiazole nanocomposite with calcined halloysite as nanocontainer Materials & Design. 129: 103-110. DOI: 10.1016/J.Matdes.2017.05.033 |
0.301 |
|
2017 |
Yu W, Yu D, Gao H, Xue F, Chen X. Fracture Toughness of Z3CN20.09M Cast Stainless Steel with Long-Term Thermal Aging Journal of Materials Engineering and Performance. 26: 4442-4449. DOI: 10.1007/S11665-017-2882-5 |
0.313 |
|
2016 |
Fu S, Wang L, Chen G, Yu D, Chen X. A tension-torsional fatigue testing apparatus for micro-scale components. The Review of Scientific Instruments. 87: 015111. PMID 26827357 DOI: 10.1063/1.4939856 |
0.361 |
|
2016 |
Fu S, Yu D, Chen X. Ratcheting of 316L stainless steel thin wire under tension-torsion loading Fracture and Structural Integrity. 10: 141-147. DOI: 10.3221/Igf-Esis.38.19 |
0.436 |
|
2016 |
Tian Y, Yu D, Zhao Z, Chen G, Chen X. Low cycle fatigue and creep–fatigue interaction behaviour of 2.25Cr1MoV steel at elevated temperature Materials At High Temperatures. 33: 75-84. DOI: 10.1080/09603409.2015.1108504 |
0.447 |
|
2016 |
Yuan X, Yu W, Fu S, Yu D, Chen X. Effect of mean stress and ratcheting strain on the low cycle fatigue behavior of a wrought 316LN stainless steel Materials Science and Engineering A. 677: 193-202. DOI: 10.1016/J.Msea.2016.09.053 |
0.435 |
|
2016 |
Zhang J, Yu D, Zhao Z, Zhang Z, Chen G, Chen X. Low cycle fatigue of 2.25Cr1Mo steel with tensile and compressed hold loading at elevated temperature Materials Science and Engineering A. 667: 251-260. DOI: 10.1016/J.Msea.2016.04.064 |
0.431 |
|
2016 |
Yu D, An K, Chen X, Bei H. Phase-specific deformation behavior of a NiAl-Cr(Mo) lamellar composite under thermal and mechanical loads Journal of Alloys and Compounds. 656: 481-490. DOI: 10.1016/J.Jallcom.2015.09.265 |
0.407 |
|
2016 |
Yuan X, Yu D, Gao LL, Gao H. Effect of Phosphate-Buffered Solution Corrosion on the Ratcheting Fatigue Behavior of a Duplex Mg-Li-Al Alloy Journal of Materials Engineering and Performance. 25: 1802-1810. DOI: 10.1007/S11665-016-2039-Y |
0.374 |
|
2015 |
Huang EW, Yu D, Yeh JW, Lee C, An K, Tu SY. A study of lattice elasticity from low entropy metals to medium and high entropy alloys Scripta Materialia. 101: 32-35. DOI: 10.1016/J.Scriptamat.2015.01.011 |
0.326 |
|
2015 |
Chen W, Xue F, tian Y, Yu D, Yu W, Chen X. Effect of thermal aging on the low cycle fatigue behavior of Z3CN20.09M cast duplex stainless steel Materials Science and Engineering A. 646: 263?271. DOI: 10.1016/J.Msea.2015.08.070 |
0.406 |
|
2015 |
Yuan X, Fu S, Yu D, Yu W, Chen X. Temperature-Dependent Bending Ratcheting Behavior of a 316LN Stainless Steel Journal of Materials Engineering and Performance. 1-6. DOI: 10.1007/S11665-015-1839-9 |
0.421 |
|
2014 |
Yu D, An K, Chen Y, Chen X. Revealing the cyclic hardening mechanism of an austenitic stainless steel by real-time in situ neutron diffraction Scripta Materialia. 89: 45-48. DOI: 10.1016/J.Scriptamat.2014.06.021 |
0.395 |
|
2014 |
Yu D, Bei H, Chen Y, George EP, An K. Phase-specific deformation behavior of a relatively tough NiAl–Cr(Mo) lamellar composite Scripta Materialia. 84: 59-62. DOI: 10.1016/J.Scriptamat.2014.04.025 |
0.377 |
|
2014 |
Chen G, Zhang ZS, Mei YH, Li X, Yu DJ, Wang L, Chen X. Applying viscoplastic constitutive models to predict ratcheting behavior of sintered nanosilver lap-shear joint Mechanics of Materials. 72: 61-71. DOI: 10.1016/J.Mechmat.2014.02.001 |
0.348 |
|
2013 |
Yu D, An K, Gao CY, Heller WT, Chen X. A portable hydro-thermo-mechanical loading cell for in situ small angle neutron scattering studies of proton exchange membranes. The Review of Scientific Instruments. 84: 105115. PMID 24182171 DOI: 10.1063/1.4826349 |
0.336 |
|
2013 |
Wen M, Li H, Yu D, Chen G, Chen X. Uniaxial ratcheting behavior of Zircaloy-4 tubes at room temperature Materials & Design. 46: 426-434. DOI: 10.1016/J.Matdes.2012.10.049 |
0.428 |
|
2013 |
Chen X, Chen X, Yu D, Gao B. Recent progresses in experimental investigation and finite element analysis of ratcheting in pressurized piping International Journal of Pressure Vessels and Piping. 101: 113-142. DOI: 10.1016/J.Ijpvp.2012.10.008 |
0.318 |
|
2013 |
Wang Y, Yu D, Chen G, Chen X. Effects of pre-strain on uniaxial ratcheting and fatigue failure of Z2CN18.10 austenitic stainless steel International Journal of Fatigue. 52: 106-113. DOI: 10.1016/J.Ijfatigue.2013.03.007 |
0.409 |
|
2012 |
Yu D, Yu W, Chen G, Jin F, Chen X. Role of dynamic strain aging in the tensile property, cyclic deformation and fatigue behavior of Z2CND18.12N stainless steel between 293 K and 723 K Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 558: 730-736. DOI: 10.1016/J.Msea.2012.08.088 |
0.349 |
|
2012 |
Shi S, Yu D, Gao L, Chen G, Chen J, Chen X. Nonlinear viscoelastic–plastic constitutive description of proton exchange membrane under immersed condition Journal of Power Sources. 213: 40-46. DOI: 10.1016/J.Jpowsour.2012.03.082 |
0.317 |
|
2012 |
Yu D, Chen X, Yu W, Chen G. Thermo-viscoplastic modeling incorporating dynamic strain aging effect on the uniaxial behavior of Z2CND18.12N stainless steel International Journal of Plasticity. 37: 119-139. DOI: 10.1016/J.Ijplas.2012.05.001 |
0.445 |
|
2012 |
Yu D, Chen G, Yu W, Li D, Chen X. Visco-plastic constitutive modeling on Ohno–Wang kinematic hardening rule for uniaxial ratcheting behavior of Z2CND18.12N steel International Journal of Plasticity. 28: 88-101. DOI: 10.1016/J.Ijplas.2011.06.001 |
0.418 |
|
2009 |
Yu D, Chen X, Chen G, Lu G, Wang Z. Applying Anand model to low-temperature sintered nanoscale silver paste chip attachment Materials & Design. 30: 4574-4579. DOI: 10.1016/J.Matdes.2009.04.006 |
0.375 |
|
Show low-probability matches. |