Year |
Citation |
Score |
2023 |
Nayak C, Kushram P, Zaidi MAA, Singh I, Sen J, Balani K. Multi-length scale strengthening and cytocompatibility of ultra high molecular weight polyethylene bio-composites by functionalized carbon nanotube and hydroxyapatite reinforcement. Journal of the Mechanical Behavior of Biomedical Materials. 140: 105694. PMID 36841125 DOI: 10.1016/j.jmbbm.2023.105694 |
0.344 |
|
2020 |
Bhattacharjee A, Hassan R, Gupta A, Verma M, Murugan PA, Sengupta P, Saravanan M, Manna I, Balani K. Effect of Zn and Co doping on antibacterial efficacy and cytocompatibility of spark plasma sintered hydroxyapatite Journal of the American Ceramic Society. 103: 4090-4100. DOI: 10.1111/Jace.17077 |
0.305 |
|
2020 |
Mistri M, Joshi S, Kar KK, Balani K. Tribomechanical insight into carbide-laden hybrid suspension-powder plasma-sprayed Tribaloy T400 composite coatings Surface & Coatings Technology. 396: 125957. DOI: 10.1016/J.Surfcoat.2020.125957 |
0.366 |
|
2020 |
Tripathi P, Katiyar PK, Ramkumar J, Balani K. Synergistic role of carbon nanotube and yttria stabilised zirconia reinforcement on wear and corrosion resistance of Cr-based nano-composite coatings Surface & Coatings Technology. 385: 125381. DOI: 10.1016/J.Surfcoat.2020.125381 |
0.466 |
|
2020 |
Alam F, Kumar A, Shukla VR, Nisar A, Balani K. Multi-length scale wear damage mechanisms of ultra-high molecular weight polyethylene nanocomposites Polymer Testing. 81: 106210. DOI: 10.1016/J.Polymertesting.2019.106210 |
0.342 |
|
2020 |
Bajpai S, Kundu R, Balani K. Effect of B4C reinforcement on microstructure, residual stress, toughening and scratch resistance of (Hf, Zr)B2 ceramics Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 796: 140022. DOI: 10.1016/J.Msea.2020.140022 |
0.38 |
|
2020 |
Maurya R, Mittal D, Balani K. Effect of heat-treatment on microstructure, mechanical and tribological properties of Mg-Li-Al based alloy Journal of Materials Research and Technology. 9: 4749-4762. DOI: 10.1016/J.Jmrt.2020.02.101 |
0.365 |
|
2020 |
Awasthi S, Pandey SK, Balani K. Tuning the magnetism and tribological behaviour of electrodeposited Ni/Cu bi-layer by selective reinforcement of carbon nanotubes Journal of Alloys and Compounds. 818: 153287. DOI: 10.1016/J.Jallcom.2019.153287 |
0.331 |
|
2020 |
Gupta A, Faisal M, Shervani S, Balani K, Subramaniam A. Thermodynamic and microstructural basis for the fast hydrogenation kinetics in Mg–Mg2Ni-carbon hybrids International Journal of Hydrogen Energy. 45: 11632-11640. DOI: 10.1016/J.Ijhydene.2020.02.037 |
0.315 |
|
2020 |
Nisar A, Bajpai S, Khan MM, Balani K. Wear damage tolerance and high temperature oxidation behavior of HfB2:ZrB2–SiC composites Ceramics International. 46: 21689-21698. DOI: 10.1016/J.Ceramint.2020.05.276 |
0.444 |
|
2020 |
Hassan R, Kundu R, Balani K. Oxidation behaviour of coarse and fine SiC reinforced ZrB2 at re-entry and atmospheric oxygen pressures Ceramics International. 46: 11056-11065. DOI: 10.1016/J.Ceramint.2020.01.125 |
0.361 |
|
2020 |
Dubey S, Awasthi S, Nisar A, Balani K. Role of Interfaces in Damage Initiation and Tolerance of Carbon Nanotube-Reinforced HfB 2 -ZrB 2 Ceramics Jom. 72: 2207-2218. DOI: 10.1007/S11837-020-04164-X |
0.387 |
|
2020 |
Ariharan S, Maurya R, Sharma RK, Sharma VK, Lohia S, Balani K. Damage mechanics of polypropylene‐based composites using progressive‐ and constant‐load scratching Polymer Composites. DOI: 10.1002/Pc.25680 |
0.332 |
|
2020 |
Hassan R, Balani K. Engineered Role of SiC Particle Size on Multi‐Lengthscale Wear Damage of Spark Plasma Sintered ZrB2 Advanced Engineering Materials. DOI: 10.1002/Adem.202000637 |
0.317 |
|
2019 |
Kandala SR, Balani K, Upadhyaya A. Mechanical and Electrochemical Characterization of Supersolidus Sintered Austenitic Stainless Steel (316 L) High Temperature Materials and Processes. 38: 792-805. DOI: 10.1515/Htmp-2019-0032 |
0.378 |
|
2019 |
Shukla V, Balani K, Subramaniam A, Omar S. Effect of Thermal Aging on the Phase Stability of 1Yb2O3–xSc2O3–(99 – x)ZrO2 (x = 7, 8 mol %) The Journal of Physical Chemistry C. 123: 21982-21992. DOI: 10.1021/Acs.Jpcc.9B05672 |
0.301 |
|
2019 |
Tripathi P, Ramkumar J, Balani K. Laser peening enhances tribological resistance of electrodeposited Cr coatings reinforced with yttria stabilized zirconia and carbon nano tubes Surface & Coatings Technology. 378: 124919. DOI: 10.1016/J.Surfcoat.2019.124919 |
0.463 |
|
2019 |
Shukla V, Balani K, Subramaniam A, Omar S. Phase stability and conductivity in the pseudo ternary system of xYb2O3-(12-x)Sc2O3-88ZrO2 (0 ≤ x ≤ 5) Solid State Ionics. 332: 93-101. DOI: 10.1016/J.Ssi.2019.01.005 |
0.325 |
|
2019 |
Sudha, Saxena M, Balani K, Maiti T. Structure and thermoelectric properties of calcium doped Sr2TiCoO6 double perovskites Materials Science and Engineering B-Advanced Functional Solid-State Materials. 244: 65-71. DOI: 10.1016/J.Mseb.2019.04.025 |
0.306 |
|
2019 |
Maurya R, Siddiqui AR, Katiyar PK, Balani K. Mechanical, tribological and anti-corrosive properties of polyaniline/graphene coated Mg-9Li-7Al-1Sn and Mg-9Li-5Al-3Sn-1Zn alloys Journal of Materials Science & Technology. 35: 1767-1778. DOI: 10.1016/J.Jmst.2019.03.028 |
0.456 |
|
2019 |
Hassan R, Omar S, Balani K. Solid solutioning in ZrB2 with HfB2: Effect on densification and oxidation resistance International Journal of Refractory Metals & Hard Materials. 84: 105041. DOI: 10.1016/J.Ijrmhm.2019.105041 |
0.348 |
|
2019 |
Nisar A, Khan MM, Bajpai S, Balani K. Processing, microstructure and mechanical properties of HfB2-ZrB2-SiC composites: Effect of B4C and carbon nanotube reinforcements International Journal of Refractory Metals & Hard Materials. 81: 111-118. DOI: 10.1016/J.Ijrmhm.2019.02.014 |
0.477 |
|
2019 |
Ariharan S, Wangaskar B, Xavier V, Venkateswaran T, Balani K. Process induced alignment of carbon nanotube decreases longitudinal thermal conductivity of Al2O3 based porous composites Ceramics International. 45: 18951-18964. DOI: 10.1016/J.Ceramint.2019.06.133 |
0.466 |
|
2019 |
Nisar A, Khan MM, Balani K. Enhanced thermo-mechanical damage tolerance of functionally graded ZrB2-20SiC ceramic reinforced with carbon nanotubes Ceramics International. 45: 6198-6208. DOI: 10.1016/J.Ceramint.2018.12.097 |
0.478 |
|
2019 |
Singh A, Patel DS, Ramkumar J, Balani K. Single step laser surface texturing for enhancing contact angle and tribological properties The International Journal of Advanced Manufacturing Technology. 100: 1253-1267. DOI: 10.1007/S00170-018-1579-8 |
0.307 |
|
2019 |
Sharma RK, Lohia S, Sharma VK, Kandpal PC, Balani K. Interfacial strengthening of polypropylene composites via bimodal porosity in Rice husk ash: Comparison with calcium carbonate reinforcement Journal of Applied Polymer Science. 136: 46989. DOI: 10.1002/App.46989 |
0.378 |
|
2018 |
Pandey A, Patel AK, S A, Kumar V, Sharma RK, Kanhed S, Nigam VK, Keshri A, Agarwal A, Balani K. Enhanced Tribological and Bacterial Resistance of Carbon Nanotube with Ceria- and Silver-Incorporated Hydroxyapatite Biocoating. Nanomaterials (Basel, Switzerland). 8. PMID 29794997 DOI: 10.3390/Nano8060363 |
0.777 |
|
2018 |
Pandey A, Midha S, Sharma RK, Maurya R, Nigam VK, Ghosh S, Balani K. Antioxidant and antibacterial hydroxyapatite-based biocomposite for orthopedic applications. Materials Science & Engineering. C, Materials For Biological Applications. 88: 13-24. PMID 29636127 DOI: 10.1016/J.Msec.2018.02.014 |
0.376 |
|
2018 |
Pandey A, Nigam VK, Balani K. Multi-length scale tribology of hydroxyapatite reinforced with ceria and silver Wear. 12-21. DOI: 10.1016/J.Wear.2018.01.006 |
0.407 |
|
2018 |
Awasthi S, Pandey CP, Balani K. Synergistic role of carbonaceous reinforcements on multi length scale tribology of electrophoretically deposited nickel-boron nitride coatings Materials Research Bulletin. 99: 61-72. DOI: 10.1016/J.Materresbull.2017.10.030 |
0.472 |
|
2018 |
Shukla P, Awasthi S, Ramkumar J, Balani K. Protective trivalent Cr-based electrochemical coatings for gun barrels Journal of Alloys and Compounds. 768: 1039-1048. DOI: 10.1016/J.Jallcom.2018.07.170 |
0.463 |
|
2018 |
Nisar A, Ariharan S, Balani K. Densification kinetics and mechanical properties of tantalum carbide International Journal of Refractory Metals & Hard Materials. 73: 221-230. DOI: 10.1016/J.Ijrmhm.2018.02.013 |
0.316 |
|
2018 |
Maurya R, Siddiqui AR, Balani K. An environment-friendly phosphate chemical conversion coating on novel Mg-9Li-7Al-1Sn and Mg-9Li-5Al-3Sn-1Zn alloys with remarkable corrosion protection Applied Surface Science. 443: 429-440. DOI: 10.1016/J.Apsusc.2018.02.254 |
0.426 |
|
2018 |
Gupta A, Nisar A, Omar S, Balani K. Densification Kinetics of CeO 2 Reinforced 8 Mol.% Y 2 O 3 Stabilized ZrO 2 Ceramics Jom. 70: 1937-1945. DOI: 10.1007/S11837-018-3001-2 |
0.337 |
|
2018 |
Kanhed S, Awasthi S, Midha S, Nair J, Nisar A, Patel AK, Pandey A, Sharma R, Goel S, Upadhyaya A, Ghosh S, Balani K. Microporous Hydroxyapatite Ceramic Composites as Tissue Engineering Scaffolds : An Experimental and Computational Study Advanced Engineering Materials. 20: 1701062. DOI: 10.1002/Adem.201701062 |
0.315 |
|
2017 |
Nautiyal P, Alam F, Balani K, Agarwal A. The Role of Nanomechanics in Healthcare. Advanced Healthcare Materials. PMID 29193838 DOI: 10.1002/Adhm.201700793 |
0.483 |
|
2017 |
Nisar A, Balani K. Phase and Microstructural Correlation of Spark Plasma Sintered HfB2-ZrB2 Based Ultra-High Temperature Ceramic Composites The Coatings. 7: 110. DOI: 10.3390/Coatings7080110 |
0.478 |
|
2017 |
Banerjee A, Mahato N, Bhaduri B, Balaji N, Siddiqui AR, Aruna ST, Verma N, Balani K. Catalytic effects of CeO2 and carbon nanotube addition in plasma-sprayed Al2O3 Nanomaterials and Energy. 6: 29-35. DOI: 10.1680/Jnaen.16.00004 |
0.428 |
|
2017 |
Shukla V, Kumar A, Basheer IL, Balani K, Subramaniam A, Omar S. Structural Characteristics and Electrical Conductivity of Spark Plasma Sintered Ytterbia Co‐doped Scandia Stabilized Zirconia Journal of the American Ceramic Society. 100: 204-214. DOI: 10.1111/Jace.14545 |
0.351 |
|
2017 |
Mahato N, Nisar A, Mohapatra P, Rawat S, Ariharan S, Balani K. Effect of far-field stresses and residual stresses incorporation in predicting fracture toughness of carbon nanotube reinforced yttria stabilized zirconia Journal of Applied Physics. 122: 145104. DOI: 10.1063/1.4990731 |
0.409 |
|
2017 |
Siddiqui AR, Maurya R, Balani K. Superhydrophobic self-floating carbon nanofiber coating for efficient gravity-directed oil/water separation Journal of Materials Chemistry. 5: 2936-2946. DOI: 10.1039/C6Ta10411H |
0.468 |
|
2017 |
Maurya R, Siddiqui AR, Balani K. In vitro degradation and biomineralization ability of hydroxyapatite coated Mg-9Li-7Al-1Sn and Mg-9Li-5Al-3Sn-1Zn alloys Surface & Coatings Technology. 325: 65-74. DOI: 10.1016/J.Surfcoat.2017.06.027 |
0.448 |
|
2017 |
Awasthi S, Maurya R, Pandey CP, Balani K. Interfacial mechanics of carbonaceous reinforcements in electrophoretically deposited nickel coatings Surface & Coatings Technology. 310: 79-86. DOI: 10.1016/J.Surfcoat.2016.12.039 |
0.45 |
|
2017 |
Hassan R, Nisar A, Ariharan S, Alam F, Kumar A, Balani K. Multi-functionality of carbon nanotubes reinforced 3 mol% yttria stabilized zirconia structural biocomposites Materials Science and Engineering: A. 704: 329-343. DOI: 10.1016/J.Msea.2017.08.039 |
0.475 |
|
2017 |
Vandana, Singh S, Jaiswal A, Balani K, Subramaniam A, Omar S. Temporal stability of oxygen-ion conductivity in 1Nb 2 O 5 -10Sc 2 O 3 -89ZrO 2 Journal of the European Ceramic Society. 38: 1688-1694. DOI: 10.1016/J.Jeurceramsoc.2017.11.008 |
0.313 |
|
2017 |
Awasthi S, Pandey SK, Juyal A, Pandey CP, Balani K. Synergistic effect of carbonaceous reinforcements on microstructural, electrochemical, magnetic and tribological properties of electrophoretically deposited nickel Journal of Alloys and Compounds. 711: 424-433. DOI: 10.1016/J.Jallcom.2017.04.003 |
0.435 |
|
2017 |
Sharma RK, Nisar A, Balani K. Mechanics of ZnO morphological dependence on wear resistance of ultra high molecular weigh polyethylene European Journal of Mechanics a-Solids. 65: 149-158. DOI: 10.1016/J.Euromechsol.2017.03.010 |
0.317 |
|
2017 |
Ariharan S, Nisar A, Balaji N, Aruna ST, Balani K. Carbon nanotubes stabilize high temperature phase and toughen Al2O3-based thermal barrier coatings Composites Part B-Engineering. 124: 76-87. DOI: 10.1016/J.Compositesb.2017.05.032 |
0.541 |
|
2017 |
Nisar A, Ariharan S, Balani K. Establishing microstructure-mechanical property correlation in ZrB2-based ultra-high temperature ceramic composites Ceramics International. 43: 13483-13492. DOI: 10.1016/J.Ceramint.2017.07.053 |
0.45 |
|
2017 |
Kanhed S, Awasthi S, Goel S, Pandey A, Sharma R, Upadhyaya A, Balani K. Porosity distribution affecting mechanical and biological behaviour of hydroxyapatite bioceramic composites Ceramics International. 43: 10442-10449. DOI: 10.1016/J.Ceramint.2017.05.083 |
0.379 |
|
2017 |
Nisar A, Ariharan S, Venkateswaran T, Sreenivas N, Balani K. Effect of carbon nanotube on processing, microstructural, mechanical and ablation behavior of ZrB2-20SiC based ultra-high temperature ceramic composites Carbon. 111: 269-282. DOI: 10.1016/J.Carbon.2016.10.002 |
0.475 |
|
2017 |
Awasthi S, Goel S, Pandey CP, Balani K. Multi-Length Scale Tribology of Electrophoretically Deposited Nickel-Diamond Coatings Jom. 69: 227-235. DOI: 10.1007/S11837-016-2142-4 |
0.437 |
|
2017 |
Ariharan S, Sengupta P, Nisar A, Agnihotri A, Balaji N, Aruna ST, Balani K. Dual-Layer Oxidation-Protective Plasma-Sprayed SiC-ZrB2/Al2O3-Carbon Nanotube Coating on Graphite Journal of Thermal Spray Technology. 26: 417-431. DOI: 10.1007/S11666-016-0508-3 |
0.521 |
|
2017 |
Nisar A, Balani K. Role of Interfaces on Multi‐length Scale Wear Mechanics of TaC‐based Composites Advanced Engineering Materials. 19: 1600713. DOI: 10.1002/Adem.201600713 |
0.355 |
|
2016 |
Patel AK, Trivedi P, Balani K. Carbon Nanotube Functionalization Decreases Osteogenic Differentiation in Aluminum Oxide Reinforced Ultrahigh Molecular Weight Polyethylene. Acs Biomaterials Science & Engineering. 2: 1242-1256. PMID 33434978 DOI: 10.1021/Acsbiomaterials.6B00154 |
0.412 |
|
2016 |
Nisar A, Ariharan S, Balani K. Synergistic reinforcement of carbon nanotubes and silicon carbide for toughening tantalum carbide based ultrahigh temperature ceramic Journal of Materials Research. 31: 682-692. DOI: 10.1557/Jmr.2016.65 |
0.48 |
|
2016 |
Trivedi P, Nune KC, Misra RDK, Patel AK, Balani K, Jayganthan R. Cellular response ofEscherichia colito Mg-2Zn-2Gd alloy with different grain structure: mechanism of disruption of colonisation Materials Technology. 31: 836-844. DOI: 10.1080/10667857.2016.1239798 |
0.312 |
|
2016 |
Uthayakumar A, Pandian A, Mathiyalagan S, Kumar A, Keshri AK, Omar S, Balani K, Krishna Moorthy SB. Interfacial Effect of the Oxygen-Ion Distribution on the Conduction Mechanism in Strontium-Added Ce0.8Sm0.2O2−δ/Na2CO3 Nanocomposite The Journal of Physical Chemistry C. 120: 25068-25077. DOI: 10.1021/Acs.Jpcc.6B07915 |
0.651 |
|
2016 |
Maurya R, Kumar B, Ariharan S, Ramkumar J, Balani K. Effect of carbonaceous reinforcements on the mechanical and tribological properties of friction stir processed Al6061 alloy Materials and Design. 98: 155-166. DOI: 10.1016/J.Matdes.2016.03.021 |
0.398 |
|
2016 |
Nisar A, Ariharan S, Venkateswaran T, Sreenivas N, Balani K. Oxidation studies on TaC based ultra-high temperature ceramic composites under plasma arc jet exposure Corrosion Science. 109: 50-61. DOI: 10.1016/J.Corsci.2016.03.013 |
0.446 |
|
2016 |
Maurya R, Gupta A, Omar S, Balani K. Effect of sintering on mechanical properties of ceria reinforced yttria stabilized zirconia Ceramics International. DOI: 10.1016/J.Ceramint.2016.04.069 |
0.391 |
|
2015 |
Carneiro F, Kruithof BP, Balani K, Agarwal A, Gaussin V, Kos L. Relationships between melanocytes, mechanical properties and extracellular matrix composition in mouse heart valves. Journal of Long-Term Effects of Medical Implants. 25: 17-26. PMID 25955004 DOI: 10.1615/Jlongtermeffmedimplants.2015011748 |
0.428 |
|
2015 |
Patel AK, Balani K. Dispersion fraction enhances cellular growth of carbon nanotube and aluminum oxide reinforced ultrahigh molecular weight polyethylene biocomposites. Materials Science & Engineering. C, Materials For Biological Applications. 46: 504-13. PMID 25492015 DOI: 10.1016/J.Msec.2014.10.075 |
0.407 |
|
2015 |
Kumar D, Akhtar SN, Patel AK, Ramkumar J, Balani K. Tribological performance of laser peened Ti–6Al–4V Wear. 203-217. DOI: 10.1016/J.Wear.2014.11.016 |
0.314 |
|
2015 |
Mahato N, Banerjee A, Gupta A, Omar S, Balani K. Progress in material selection for solid oxide fuel cell technology: A review Progress in Materials Science. 72: 141-337. DOI: 10.1016/J.Pmatsci.2015.01.001 |
0.358 |
|
2015 |
Gupta A, Kumar V, Nair J, Bansal A, Balani K. Abridgment of nano and micro length scale mechanical properties of novel Mg-9Li-7Al-1Sn and Mg-9Li-5Al-3Sn-1Zn alloys using object oriented finite element modeling Journal of Alloys and Compounds. 634: 24-31. DOI: 10.1016/J.Jallcom.2015.02.066 |
0.358 |
|
2015 |
Gupta A, Shervani S, Faisal M, Balani K, Subramaniam A. Hydrogen storage in Mg-Mg<inf>2</inf>Ni-carbon hybrids Journal of Alloys and Compounds. 645: S397-S399. DOI: 10.1016/J.Jallcom.2014.12.101 |
0.339 |
|
2015 |
Alam F, Kumar A, Patel AK, Sharma RK, Balani K. Processing, Characterization and Fretting Wear of Zinc Oxide and Silver Nanoparticles Reinforced Ultra High Molecular Weight Polyethylene Biopolymer Nanocomposite Jom. 67: 688-701. DOI: 10.1007/S11837-015-1358-Z |
0.366 |
|
2015 |
Kumar V, Shekhar R, Balani K. Corrosion Behavior of Novel Mg-9Li-7Al-1Sn and Mg-9Li-5Al-3Sn-1Zn Alloys in NaCl Aqueous Solution Journal of Materials Engineering and Performance. 24: 4060-4070. DOI: 10.1007/S11665-015-1687-7 |
0.305 |
|
2015 |
Mohapatra P, Rawat S, Mahato N, Balani K. Restriction of Phase Transformation in Carbon Nanotube-Reinforced Yttria-Stabilized Zirconia Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 46: 2965-2974. DOI: 10.1007/S11661-015-2897-1 |
0.424 |
|
2014 |
Herkendell K, Shukla VR, Patel AK, Balani K. Domination of volumetric toughening by silver nanoparticles over interfacial strengthening of carbon nanotubes in bactericidal hydroxyapatite biocomposite. Materials Science & Engineering. C, Materials For Biological Applications. 34: 455-67. PMID 24268282 DOI: 10.1016/J.Msec.2013.09.034 |
0.427 |
|
2014 |
Sharma RK, Balani K. Mechanics of ZnO micro-rod and ZnO nanoparticle reinforcement in ultra-high molecular weight polyethylene biocomposite Journal of Physics D. 47: 345301. DOI: 10.1088/0022-3727/47/34/345301 |
0.322 |
|
2014 |
Sikdar K, Shekhar S, Balani K. Fretting wear of Mg-Li-Al based alloys Wear. 318: 177-187. DOI: 10.1016/J.Wear.2014.06.012 |
0.372 |
|
2014 |
Kumar V, Govind, Philippe K, Shekhar R, Balani K. Processing and Nano-mechanical Characterization of Mg-Li-Al based Alloys Procedia Materials Science. 5: 585-591. DOI: 10.1016/J.Mspro.2014.07.303 |
0.318 |
|
2014 |
Gupta A, Barkam S, Lahiri D, Balasubramaniam R, Balani K. Effect of alumina dispersion on microstructural and nanomechanical properties of pulse electrodeposited Nickel-Alumina composite coatings Journal of Materials Science and Technology. 30: 808-813. DOI: 10.1016/J.Jmst.2013.12.013 |
0.683 |
|
2014 |
Bajpai S, Gupta A, Pradhan SK, Mandal T, Balani K. Crack Propagation Resistance of α-Al2O3 Reinforced Pulsed Laser-Deposited Hydroxyapatite Coating on 316 Stainless Steel Jom. 66: 2095-2107. DOI: 10.1007/S11837-014-1152-3 |
0.449 |
|
2013 |
Afzal MA, Kalmodia S, Kesarwani P, Basu B, Balani K. Bactericidal effect of silver-reinforced carbon nanotube and hydroxyapatite composites. Journal of Biomaterials Applications. 27: 967-78. PMID 22286208 DOI: 10.1177/0885328211431856 |
0.431 |
|
2013 |
Ariharan S, Gupta A, Keshri A, Agarwal A, Balani K. Size Effect of Yttria Stabilized Zirconia Addition on Fracture Toughness and Thermal Conductivity of Plasma Sprayed Aluminum Oxide Composite Coatings Nanoscience and Nanotechnology Letters. 4: 323-332. DOI: 10.1166/Nnl.2012.1317 |
0.755 |
|
2013 |
Dubey AK, Ea A, Balani K, Basu B. Multifunctional properties of multistage spark plasma sintered HA-BaTiO3-based piezobiocomposites for bone replacement applications Journal of the American Ceramic Society. 96: 3753-3759. DOI: 10.1111/Jace.12566 |
0.408 |
|
2013 |
Bajpai I, Balani K, Basu B. Spark Plasma Sintered HA-Fe3O4-Based Multifunctional Magnetic Biocomposites Journal of the American Ceramic Society. 96: 2100-2108. DOI: 10.1111/Jace.12386 |
0.343 |
|
2013 |
Kumar V, Gupta A, Lahiri D, Balani K. Serrated yielding during nanoindentation of thermomechanically processed novel Mg-9Li-7Al-1Sn and Mg-9Li-5Al-3Sn-1Zn alloys Journal of Physics D: Applied Physics. 46. DOI: 10.1088/0022-3727/46/14/145304 |
0.585 |
|
2013 |
Gupta A, Tripathi G, Lahiri D, Balani K. Compression Molded Ultra High Molecular Weight Polyethylene-Hydroxyapatite-Aluminum Oxide-Carbon Nanotube Hybrid Composites forHard Tissue Replacement Journal of Materials Science and Technology. 29: 514-522. DOI: 10.1016/J.Jmst.2013.03.010 |
0.687 |
|
2013 |
Jain P, Mandal T, Prakash P, Garg A, Balani K. Electrophoretic deposition of nanocrystalline hydroxyapatite on Ti6Al4V/TiO2 substrate Journal of Coatings Technology Research. 10: 263-275. DOI: 10.1007/S11998-012-9438-2 |
0.426 |
|
2013 |
Mahato N, Sharma S, Keshri AK, Simpson A, Agarwal A, Balani K. Nanomechanical Properties and Thermal Conductivity Estimation of Plasma-Sprayed, Solid-Oxide Fuel Cell Components: Ceria-Doped, Yttria-Stabilized Zirconia Electrolyte Jom. 65: 749-762. DOI: 10.1007/S11837-013-0601-8 |
0.737 |
|
2012 |
Kumar V, Balasubramaniam R, Shekhar R, Balani K. Microstructure and texture evolution during hot rolling of Mg-9Li-7Al-1Sn alloy for aerospace application Materials Science Forum. 702: 85-88. DOI: 10.4028/Www.Scientific.Net/Msf.702-703.85 |
0.322 |
|
2012 |
Gupta A, Sharma S, Mahato N, Simpson A, Omar S, Balani K. Mechanical properties of spark plasma sintered ceria reinforced 8 mol% yttria-stabilized zirconia electrolyte Nanomaterials and Energy. 1: 306-315. DOI: 10.1680/Nme.12.00018 |
0.41 |
|
2012 |
Mahato N, Gupta A, Balani K. Doped zirconia and ceria-based electrolytes for solid oxide fuel cells: a review Nanomaterials and Energy. 1: 27-45. DOI: 10.1680/Nme.11.00004 |
0.309 |
|
2012 |
Balani K, Bakshi SR, Mungole T, Agarwal A. Ab-initio molecular modeling of interfaces in tantalum-carbon system Journal of Applied Physics. 111: 063521. DOI: 10.1063/1.3695368 |
0.731 |
|
2012 |
Chen Y, Balani K, Agarwal A. Do thermal residual stresses contribute to the improved fracture toughness of carbon nanotube/alumina nanocomposites? Scripta Materialia. 66: 347-350. DOI: 10.1016/J.Scriptamat.2011.11.026 |
0.559 |
|
2012 |
Afzal MAF, Kesarwani P, Reddy KM, Kalmodia S, Basu B, Balani K. Functionally graded hydroxyapatite-alumina-zirconia biocomposite: Synergy of toughness and biocompatibility Materials Science and Engineering: C. 32: 1164-1173. DOI: 10.1016/J.Msec.2012.03.003 |
0.386 |
|
2012 |
Kumar V, Govind, Shekhar R, Balasubramaniam R, Balani K. Microstructure evolution and texture development in thermomechanically processed Mg-Li-Al based alloys Materials Science and Engineering A. 547: 38-50. DOI: 10.1016/J.Msea.2012.03.074 |
0.338 |
|
2012 |
Gupta A, Tripathi G, Basu B, Balani K. Dependence of Protein Adsorption on Wetting Behavior of UHMWPE–HA–Al2O3–CNT Hybrid Biocomposites Jom. 64: 506-513. DOI: 10.1007/S11837-012-0295-3 |
0.347 |
|
2011 |
Balani K, Patel RR, Keshri AK, Lahiri D, Agarwal A. Multi-scale hierarchy of Chelydra serpentina: microstructure and mechanical properties of turtle shell. Journal of the Mechanical Behavior of Biomedical Materials. 4: 1440-51. PMID 21783154 DOI: 10.1016/J.Jmbbm.2011.05.014 |
0.759 |
|
2011 |
Kumar V, Govind, Shekhar R, Balani K. Effect of hot rolling on microstructure and texture evolution of Mg-Li based alloy Materials Science Forum. 690: 347-350. DOI: 10.4028/Www.Scientific.Net/Msf.690.347 |
0.303 |
|
2011 |
Bhardwaj M, Balani K, Balasubramaniam R, Pandey S, Agarwal A. Effect of current density and grain refining agents on pulsed electrodeposition of nanocrystalline nickel Surface Engineering. 27: 642-648. DOI: 10.1179/026708410X12683118611185 |
0.54 |
|
2011 |
Dubey AK, Basu B, Balani K, Guo R, Bhalla AS. Multifunctionality of Perovskites BaTiO 3 and CaTiO 3 in a Composite with Hydroxyapatite as Orthopedic Implant Materials Integrated Ferroelectrics. 131: 119-126. DOI: 10.1080/10584587.2011.616425 |
0.382 |
|
2011 |
Dubey AK, Basu B, Balani K, Guo R, Bhalla AS. Dielectric and Pyroelectric Properties of HAp-BaTiO3 Composites Ferroelectrics. 423: 63-76. DOI: 10.1080/00150193.2011.618382 |
0.374 |
|
2011 |
Samal M, Seidenfuss M, Roos E, Balani K. Investigation of failure behavior of ferritic–austenitic type of dissimilar steel welded joints Engineering Failure Analysis. 18: 999-1008. DOI: 10.1016/J.Engfailanal.2010.12.011 |
0.303 |
|
2010 |
Gupta A, Sharma S, Joshi MR, Agarwal P, Balani K. Grain Growth Behavior of Al2O3 Nanomaterials: A Review Materials Science Forum. 653: 87-130. DOI: 10.4028/Www.Scientific.Net/Msf.653.87 |
0.322 |
|
2010 |
Balani K, Bakshi SR, Lahiri D, Agarwal A. Grain growth behavior of aluminum oxide reinforced with carbon nanotube during plasma spraying and PostSpray consolidation International Journal of Applied Ceramic Technology. 7: 846-855. DOI: 10.1111/J.1744-7402.2009.02385.X |
0.792 |
|
2010 |
Rishabh A, Joshi MR, Balani K. Fractal model for estimating fracture toughness of carbon nanotube reinforced aluminum oxide Journal of Applied Physics. 107: 123532. DOI: 10.1063/1.3445869 |
0.347 |
|
2010 |
Kalmodia S, Goenka S, Laha T, Lahiri D, Basu B, Balani K. Microstructure, mechanical properties, and in vitro biocompatibility of spark plasma sintered hydroxyapatite-aluminum oxide-carbon nanotube composite Materials Science and Engineering C. 30: 1162-1169. DOI: 10.1016/J.Msec.2010.06.009 |
0.775 |
|
2010 |
Agarwal M, Kumar V, Malladi SRK, Balasubramaniam R, Balani K. Effect of current density on the pulsed co-electrodeposition of nanocrystalline nickel-copper alloys Jom. 62: 88-92. DOI: 10.1007/S11837-010-0095-6 |
0.371 |
|
2009 |
Balani K, Brito FC, Kos L, Agarwal A. Melanocyte pigmentation stiffens murine cardiac tricuspid valve leaflet. Journal of the Royal Society, Interface / the Royal Society. 6: 1097-102. PMID 19586956 DOI: 10.1098/Rsif.2009.0174 |
0.48 |
|
2009 |
Balani K, Batista RG, Lahiri D, Agarwal A. The hydrophobicity of a lotus leaf: a nanomechanical and computational approach. Nanotechnology. 20: 305707. PMID 19584417 DOI: 10.1088/0957-4484/20/30/305707 |
0.676 |
|
2009 |
Paital SR, Balani K, Agarwal A, Dahotre NB. Fabrication and evaluation of a pulse laser-induced Ca-P coating on a Ti alloy for bioapplication. Biomedical Materials (Bristol, England). 4: 015009. PMID 19020344 DOI: 10.1088/1748-6041/4/1/015009 |
0.689 |
|
2009 |
Keshri AK, Balani K, Bakshi SR, Singh V, Laha T, Seal S, Agarwal A. Structural transformations in carbon nanotubes during thermal spray processing Surface and Coatings Technology. 203: 2193-2201. DOI: 10.1016/J.Surfcoat.2009.02.013 |
0.807 |
|
2009 |
Chen Y, Omar S, Keshri AK, Balani K, Babu K, Nino JC, Seal S, Agarwal A. Ionic conductivity of plasma-sprayed nanocrystalline yttria-stabilized zirconia electrolyte for solid oxide fuel cells Scripta Materialia. 60: 1023-1026. DOI: 10.1016/J.Scriptamat.2009.02.036 |
0.721 |
|
2009 |
Tercero JE, Namin S, Lahiri D, Balani K, Tsoukias N, Agarwal A. Effect of carbon nanotube and aluminum oxide addition on plasma-sprayed hydroxyapatite coating's mechanical properties and biocompatibility Materials Science and Engineering C. 29: 2195-2202. DOI: 10.1016/J.Msec.2009.05.001 |
0.79 |
|
2009 |
Zhang T, Kumari L, Du G, Li W, Wang Q, Balani K, Agarwal A. Mechanical properties of carbon nanotube–alumina nanocomposites synthesized by chemical vapor deposition and spark plasma sintering Composites Part a: Applied Science and Manufacturing. 40: 86-93. DOI: 10.1016/J.Compositesa.2008.10.003 |
0.667 |
|
2009 |
Singh V, Diaz R, Balani K, Agarwal A, Seal S. Chromium carbide–CNT nanocomposites with enhanced mechanical properties Acta Materialia. 57: 335-344. DOI: 10.1016/J.Actamat.2008.09.023 |
0.676 |
|
2009 |
Balani K, Lahiri D, Keshri AK, Bakshi SR, Tercero JE, Agarwal A. The nano-scratch behavior of biocompatible hydroxyapatite reinforced with aluminum oxide and carbon nanotubes Jom. 61: 63-66. DOI: 10.1007/S11837-009-0136-1 |
0.823 |
|
2009 |
Chen Y, Samant A, Balani K, Dahotre NB, Agarwal A. Effect of laser melting on plasma-sprayed aluminum oxide coatings reinforced with carbon nanotubes Applied Physics a: Materials Science and Processing. 94: 861-870. DOI: 10.1007/S00339-008-4990-4 |
0.713 |
|
2008 |
Balani K, Agarwal A. Wetting of carbon nanotubes by aluminum oxide. Nanotechnology. 19: 165701. PMID 21825653 DOI: 10.1088/0957-4484/19/16/165701 |
0.595 |
|
2008 |
Bakshi SR, Balani K, Agarwal A. Thermal Conductivity of Plasma-Sprayed Aluminum Oxide—Multiwalled Carbon Nanotube Composites Journal of the American Ceramic Society. 91: 942-947. DOI: 10.1111/J.1551-2916.2007.02081.X |
0.652 |
|
2008 |
Balani K, Agarwal A. Damping behavior of carbon nanotube reinforced aluminum oxide coatings by nanomechanical dynamic modulus mapping Journal of Applied Physics. 104: 063517. DOI: 10.1063/1.2978185 |
0.681 |
|
2008 |
Chen Y, Balani K, Agarwal A. Analytical model to evaluate interface characteristics of carbon nanotube reinforced aluminum oxide nanocomposites Applied Physics Letters. 92: 011916. DOI: 10.1063/1.2821108 |
0.585 |
|
2008 |
Bakshi SR, Singh V, Balani K, McCartney DG, Seal S, Agarwal A. Carbon nanotube reinforced aluminum composite coating via cold spraying Surface and Coatings Technology. 202: 5162-5169. DOI: 10.1016/J.Surfcoat.2008.05.042 |
0.783 |
|
2008 |
Balani K, Agarwal A. Process map for plasma sprayed aluminum oxide—Carbon nanotube nanocomposite coatings Metal Finishing. 106: 45-51. DOI: 10.1016/J.Surfcoat.2008.03.024 |
0.644 |
|
2008 |
Chen Y, Laha T, Balani K, Agarwal A. Nanomechanical properties of hafnium nitride coating Scripta Materialia. 58: 1121-1124. DOI: 10.1016/J.Scriptamat.2008.02.012 |
0.737 |
|
2008 |
Balani K, Harimkar SP, Keshri A, Chen Y, Dahotre NB, Agarwal A. Multiscale wear of plasma-sprayed carbon-nanotube-reinforced aluminum oxide nanocomposite coating Acta Materialia. 56: 5984-5994. DOI: 10.1016/J.Actamat.2008.08.020 |
0.807 |
|
2008 |
Balani K, Zhang T, Karakoti A, Li W, Seal S, Agarwal A. In situ carbon nanotube reinforcements in a plasma-sprayed aluminum oxide nanocomposite coating Acta Materialia. 56: 571-579. DOI: 10.1016/J.Actamat.2007.10.038 |
0.648 |
|
2007 |
Balani K, Bakshi SR, Chen Y, Laha T, Agarwal A. Role of powder treatment and carbon nanotube dispersion in the fracture toughening of plasma-sprayed aluminum oxide-carbon nanotube nanocomposite. Journal of Nanoscience and Nanotechnology. 7: 3553-62. PMID 18330173 DOI: 10.1166/Jnn.2007.851 |
0.817 |
|
2007 |
Balani K, Chen Y, Harimkar SP, Dahotre NB, Agarwal A. Tribological behavior of plasma-sprayed carbon nanotube-reinforced hydroxyapatite coating in physiological solution. Acta Biomaterialia. 3: 944-51. PMID 17646138 DOI: 10.1016/J.Actbio.2007.06.001 |
0.75 |
|
2007 |
Balani K, Anderson R, Laha T, Andara M, Tercero J, Crumpler E, Agarwal A. Plasma-sprayed carbon nanotube reinforced hydroxyapatite coatings and their interaction with human osteoblasts in vitro. Biomaterials. 28: 618-24. PMID 17007921 DOI: 10.1016/J.Biomaterials.2006.09.013 |
0.762 |
|
2007 |
Bakshi SR, Laha T, Balani K, Agarwal A, Karthikeyan J. Effect of carrier gas on mechanical properties and fracture behaviour of cold sprayed aluminium coatings Surface Engineering. 23: 18-22. DOI: 10.1179/174329407X161618 |
0.79 |
|
2007 |
Chen Y, Balani K, Agarwal A. Modified Eshelby tensor modeling for elastic property prediction of carbon nanotube reinforced ceramic nanocomposites Applied Physics Letters. 91: 031903. DOI: 10.1063/1.2756360 |
0.6 |
|
2007 |
Bakshi SR, Balani K, Laha T, Tercero J, Agarwal A. The nanomechanical and nanoscratch properties of MWNT-reinforced ultrahigh-molecular-weight polyethylene coatings Jom. 59: 50-53. DOI: 10.1007/S11837-007-0089-1 |
0.805 |
|
2006 |
Balani K, Gonzalez G, Agarwal A, Hickman R, O'Dell JS, Seal S. Synthesis, Microstructural Characterization, and Mechanical Property Evaluation of Vacuum Plasma Sprayed Tantalum Carbide Journal of the American Ceramic Society. 89: 1419-1425. DOI: 10.1111/J.1551-2916.2005.00899.X |
0.637 |
|
2006 |
Balani K, Agarwal A, Dahotre NB. Molecular modeling of metastable FeB 49 phase evolution in laser surface engineered coating Journal of Applied Physics. 99. DOI: 10.1063/1.2172704 |
0.625 |
|
2006 |
Viswanathan V, Laha T, Balani K, Agarwal A, Seal S. Challenges and advances in nanocomposite processing techniques Materials Science and Engineering: R: Reports. 54: 121-285. DOI: 10.1016/J.Mser.2006.11.002 |
0.672 |
|
2005 |
Balani K, Laha T, Agarwal A, Karthikeyan J, Munroe N. Effect of carrier gases on microstructural and electrochemical behavior of cold-sprayed 1100 aluminum coating Surface and Coatings Technology. 195: 272-279. DOI: 10.1016/J.Surfcoat.2004.06.028 |
0.715 |
|
2005 |
Balani K, Agarwal A, Seal S, Karthikeyan J. Transmission electron microscopy of cold sprayed 1100 aluminum coating Scripta Materialia. 53: 845-850. DOI: 10.1016/J.Scriptamat.2005.06.008 |
0.625 |
|
2005 |
Laha T, Balani K, Agarwal A, Patil S, Seal S. Synthesis of nanostructured spherical aluminum oxide powders by plasma engineering Metallurgical and Materials Transactions A. 36: 301-309. DOI: 10.1007/S11661-005-0303-0 |
0.686 |
|
2003 |
Balani K, Yang F. Creep behavior of 90 Pb–10 Sn alloy Physica Status Solidi (a). 198: 387-394. DOI: 10.1002/Pssa.200306626 |
0.315 |
|
Show low-probability matches. |