| Year |
Citation |
Score |
| 2020 |
Landers RG, Barton K, Devasia S, Kurfess T, Pagilla P, Tomizuka M. A Review of Manufacturing Process Control Journal of Manufacturing Science and Engineering. 142. DOI: 10.1115/1.4048111 |
0.42 |
|
| 2020 |
Li J, Landers RG, Park J. A Comprehensive Single-Particle-Degradation Model for Battery State-Of-Health Prediction Journal of Power Sources. 456: 227950. DOI: 10.1016/J.Jpowsour.2020.227950 |
0.301 |
|
| 2020 |
Lough CS, Escano LI, Qu M, Smith CC, Landers RG, Bristow DA, Chen L, Kinzel EC. In-situ optical emission spectroscopy of selective laser melting Journal of Manufacturing Processes. 53: 336-341. DOI: 10.1016/J.Jmapro.2020.02.016 |
0.31 |
|
| 2019 |
Tang A, Li S, Yang G, Li L, Landers RG. Wire Vibration Modeling and Experimental Analysis for Wire Saw Machining Journal of Manufacturing Science and Engineering-Transactions of the Asme. 141. DOI: 10.1115/1.4045059 |
0.339 |
|
| 2019 |
Sammons PM, Bristow DA, Landers RG. Two-Dimensional Modeling and System Identification of the Laser Metal Deposition Process Journal of Dynamic Systems Measurement and Control-Transactions of the Asme. 141: 21012. DOI: 10.1115/1.4041444 |
0.308 |
|
| 2019 |
Sammons PM, Gegel ML, Bristow DA, Landers RG. Repetitive Process Control of Additive Manufacturing With Application to Laser Metal Deposition Ieee Transactions On Control Systems and Technology. 27: 566-575. DOI: 10.1109/Tcst.2017.2781653 |
0.43 |
|
| 2019 |
Fischer JD, Woodside MR, Gonzalez MM, Lutes NA, Bristow DA, Landers RG. Iterative learning control of single point incremental sheet forming process using digital image correlation Procedia Manufacturing. 34: 940-949. DOI: 10.1016/J.Promfg.2019.06.108 |
0.36 |
|
| 2019 |
Gonzalez MM, Lutes NA, Fischer JD, Woodside MR, Bristow DA, Landers RG. Analysis of Geometric Accuracy and Thickness Reduction in Multistage Incremental Sheet Forming using Digital Image Correlation Procedia Manufacturing. 34: 950-960. DOI: 10.1016/J.Promfg.2019.06.105 |
0.323 |
|
| 2019 |
Shujuan L, Dong Y, Li Y, Li P, Yang Z, Landers RG. Geometrical simulation and analysis of ball-end milling surface topography The International Journal of Advanced Manufacturing Technology. 102: 1885-1900. DOI: 10.1007/S00170-018-03217-5 |
0.316 |
|
| 2018 |
Luo J, Hostetler JM, Gilbert L, Goldstein JT, Urbas AM, Bristow DA, Landers RG, Kinzel EC. Additive manufacturing of transparent fused quartz Optical Engineering. 57: 41408. DOI: 10.1117/1.Oe.57.4.041408 |
0.352 |
|
| 2018 |
Peters D, Drallmeier J, Bristow DA, Landers RG, Kinzel EC. Sensing and Control in Glass Additive Manufacturing Mechatronics. 56: 188-197. DOI: 10.1016/J.Mechatronics.2018.06.002 |
0.429 |
|
| 2018 |
Ko H, Bazzoli P, Nisbett JA, Ma L, Bristow DA, Landers RG, Chen Y, Kapoor SG, Ferreira PM. Quasistatic error modeling and model testing for a 5-axis machine with a redundant axis Journal of Manufacturing Processes. 31: 875-883. DOI: 10.1016/J.Jmapro.2018.01.007 |
0.346 |
|
| 2018 |
Li J, Adewuyi K, Lotfi N, Landers RG, Park J. A Single Particle Model with Chemical/Mechanical Degradation Physics for Lithium Ion Battery State of Health (SOH) Estimation Applied Energy. 212: 1178-1190. DOI: 10.1016/J.Apenergy.2018.01.011 |
0.318 |
|
| 2017 |
Luo J, Goldstein JT, Urbas AM, Bristow DA, Landers RG, Kinzel EC. Additive manufacturing of borosilicate glass (Conference Presentation) Proceedings of Spie. 10095. DOI: 10.1117/12.2256667 |
0.315 |
|
| 2017 |
Luo J, Gilbert LJ, Qu C, Landers RG, Bristow DA, Kinzel EC. Additive Manufacturing of Transparent Soda-Lime Glass Using a Filament-Fed Process Journal of Manufacturing Science and Engineering-Transactions of the Asme. 139: 61006. DOI: 10.1115/1.4035182 |
0.337 |
|
| 2017 |
Li S, Tang A, Liu Y, Wang J, Cui D, Landers RG. Analytical Force Modeling of Fixed Abrasive Diamond Wire Saw Machining With Application to SiC Monocrystal Wafer Processing Journal of Manufacturing Science and Engineering-Transactions of the Asme. 139: 41003. DOI: 10.1115/1.4034792 |
0.417 |
|
| 2017 |
Creamer J, Sammons PM, Bristow DA, Landers RG, Freeman PL, Easley SJ. Table-Based Volumetric Error Compensation of Large Five-Axis Machine Tools Journal of Manufacturing Science and Engineering-Transactions of the Asme. 139: 21011. DOI: 10.1115/1.4034399 |
0.343 |
|
| 2017 |
Lotfi N, Landers RG, Li J, Park J. Reduced-Order Electrochemical Model-Based SOC Observer With Output Model Uncertainty Estimation Ieee Transactions On Control Systems and Technology. 25: 1217-1230. DOI: 10.1109/Tcst.2016.2598764 |
0.341 |
|
| 2017 |
Li W, Ghazanfari A, Leu MC, Landers RG. Extrusion-on-demand methods for high solids loading ceramic paste in freeform extrusion fabrication Virtual and Physical Prototyping. 12: 193-205. DOI: 10.1080/17452759.2017.1312735 |
0.343 |
|
| 2017 |
Ko HW, Bazzoli P, Nisbett JA, Ma L, Bristow D, Landers RG, Chen Y, Kapoor SG, Ferreira PM. Quasistatic Error Modeling and Model Testing for a 5-Axis Machine Procedia Manufacturing. 10: 443-455. DOI: 10.1016/J.Promfg.2017.07.023 |
0.35 |
|
| 2017 |
West BM, Capps NE, Urban JS, Pribe JD, Hartwig TJ, Lunn TD, Brown B, Bristow DA, Landers RG, Kinzel EC. Modal analysis of metal additive manufactured parts Manufacturing Letters. 13: 30-33. DOI: 10.1016/J.Mfglet.2017.06.001 |
0.335 |
|
| 2017 |
Creamer J, Bristow DA, Landers RG. Selection of limited and constrained compensation tables for five-axis machine tools The International Journal of Advanced Manufacturing Technology. 92: 1315-1327. DOI: 10.1007/S00170-017-0230-4 |
0.396 |
|
| 2016 |
Luo J, Gilbert LJ, Peters DC, Bristow DA, Landers RG, Goldstein JT, Urbas AM, Kinzel EC. Bubble formation in additive manufacturing of glass Proceedings of Spie. 9822. DOI: 10.1117/12.2224321 |
0.314 |
|
| 2016 |
Luo J, Gilbert LJ, Bristow DA, Landers RG, Goldstein JT, Urbas AM, Kinzel EC. Additive Manufacturing of Glass for Optical Applications Proceedings of Spie. 9738. DOI: 10.1117/12.2218137 |
0.361 |
|
| 2016 |
Li M, Ghazanfari A, Li W, Landers RG, Leu MC. Modeling and analysis of paste freezing in freeze-form extrusion fabrication of thin-wall parts via a lumped method Journal of Materials Processing Technology. 237: 163-180. DOI: 10.1016/J.Jmatprotec.2016.05.027 |
0.35 |
|
| 2016 |
Lotfi N, Zomorodi H, Landers RG. Active Disturbance Rejection Control for Voltage Stabilization in Open-Cathode Fuel Cells through Temperature Regulation Control Engineering Practice. 56: 92-100. DOI: 10.1016/J.Conengprac.2016.08.006 |
0.314 |
|
| 2015 |
Li S, Du S, Tang A, Landers RG, Zhang Y. Force Modeling and Control of SiC Monocrystal Wafer Processing Journal of Manufacturing Science and Engineering, Transactions of the Asme. 137. DOI: 10.1115/1.4029432 |
0.45 |
|
| 2015 |
Li S, Liu Y, Landers RG. An Adaptive Evolutionary Algorithm for Optimizing Process Planning of Parallel Drilling Operations The International Journal of Advanced Manufacturing Technology. 79: 1247-1263. DOI: 10.1007/S00170-015-6884-X |
0.352 |
|
| 2014 |
Li M, Landers RG, Leu MC. Modeling, Analysis, and Simulation of Paste Freezing in Freeze-Form Extrusion Fabrication of Thin-Wall Parts Journal of Manufacturing Science and Engineering, Transactions of the Asme. 136. DOI: 10.1115/1.4028577 |
0.32 |
|
| 2014 |
Heydari A, Landers RG, Balakrishnan SN. Optimal control approach for turning process planning optimization Ieee Transactions On Control Systems Technology. 22: 1337-1349. DOI: 10.1109/Tcst.2013.2281374 |
0.381 |
|
| 2014 |
Zomorodi Moghadam H, Landers RG, Balakrishnan SN. Hierarchical optimal contour control of motion systems Mechatronics. 24: 98-107. DOI: 10.1016/J.Mechatronics.2013.12.007 |
0.372 |
|
| 2014 |
Zomorodi Moghadam H, Landers RG, Balakrishnan SN. Hierarchical optimal force-position control of complex manufacturing processes Control Engineering Practice. 25: 75-84. DOI: 10.1016/J.Conengprac.2013.12.008 |
0.422 |
|
| 2013 |
Sammons PM, Bristow DA, Landers RG. Height dependent laser metal deposition process modeling Journal of Manufacturing Science and Engineering, Transactions of the Asme. 135. DOI: 10.1115/1.4025061 |
0.307 |
|
| 2013 |
Li M, Tang L, Landers RG, Leu MC. Extrusion process modeling for aqueous-based ceramic pastes, part 2: Experimental verification Journal of Manufacturing Science and Engineering, Transactions of the Asme. 135. DOI: 10.1115/1.4025015 |
0.361 |
|
| 2013 |
Li M, Tang L, Landers RG, Leu M. Extrusion Process Modeling for Aqueous-Based Ceramic Pastes—Part 1: Constitutive Model Journal of Manufacturing Science and Engineering-Transactions of the Asme. 135: 51008. DOI: 10.1115/1.4025014 |
0.331 |
|
| 2013 |
Deuser BK, Tang L, Landers RG, Leu MC, Hilmas GE. Hybrid extrusion force-velocity control using freeze-form extrusion fabrication for functionally graded material parts Journal of Manufacturing Science and Engineering, Transactions of the Asme. 135. DOI: 10.1115/1.4024534 |
0.406 |
|
| 2013 |
Tang L, Landers RG. Multiaxis Contour Control—the State of the Art Ieee Transactions On Control Systems and Technology. 21: 1997-2010. DOI: 10.1109/Tcst.2012.2235179 |
0.34 |
|
| 2013 |
Li S, Liu Y, Li Y, Landers RG, Tang L. Process planning optimization for parallel drilling of blind holes using a two phase genetic algorithm Journal of Intelligent Manufacturing. 24: 791-804. DOI: 10.1007/S10845-012-0628-7 |
0.383 |
|
| 2013 |
Liu H, Liu J, Leu MC, Landers R, Huang T. Factors influencing paste extrusion pressure and liquid content of extrudate in freeze-form extrusion fabrication International Journal of Advanced Manufacturing Technology. 67: 899-906. DOI: 10.1007/S00170-012-4534-0 |
0.32 |
|
| 2012 |
Brown D, Landers RG. Control Oriented Thermal Modeling of Lithium Ion Batteries from a First Principle Model via Model Reduction by the Global Arnoldi Algorithm Journal of the Electrochemical Society. 159. DOI: 10.1149/2.065212Jes |
0.309 |
|
| 2012 |
Tang L, Landers RG. Predictive Contour Control With Adaptive Feed Rate Ieee-Asme Transactions On Mechatronics. 17: 669-679. DOI: 10.1109/Tmech.2011.2119324 |
0.365 |
|
| 2012 |
Mannava A, Balakrishnan SN, Tang L, Landers RG. Optimal Tracking Control of Motion Systems Ieee Transactions On Control Systems and Technology. 20: 1548-1558. DOI: 10.1109/Tcst.2011.2168608 |
0.404 |
|
| 2012 |
Leu MC, Deuser BK, Tang L, Landers RG, Hilmas GE, Watts JL. Freeze-form extrusion fabrication of functionally graded materials Cirp Annals - Manufacturing Technology. 61: 223-226. DOI: 10.1016/J.Cirp.2012.03.050 |
0.334 |
|
| 2011 |
Tang L, Landers RG. Layer-to-Layer Height Control for Laser Metal Deposition Process Journal of Manufacturing Science and Engineering-Transactions of the Asme. 133: 21009. DOI: 10.1115/1.4003691 |
0.403 |
|
| 2010 |
Zhao X, Landers RG, Leu MC. Adaptive extrusion force control of freeze-form extrusion fabrication processes Journal of Manufacturing Science and Engineering, Transactions of the Asme. 132. DOI: 10.1115/1.4003009 |
0.437 |
|
| 2010 |
Zhang H, Landers RG, Miller BA. Adaptive Control of Mechanical Gas Face Seals With Rotor Runout and Static Stator Misalignment Journal of Dynamic Systems Measurement and Control-Transactions of the Asme. 132: 41009. DOI: 10.1115/1.4001708 |
0.389 |
|
| 2010 |
Tang L, Landers RG. Melt Pool Temperature Control for Laser Metal Deposition Processes—Part II: Layer-to-Layer Temperature Control Journal of Manufacturing Science and Engineering-Transactions of the Asme. 132: 11011. DOI: 10.1115/1.4000883 |
0.338 |
|
| 2010 |
Tang L, Landers RG. Melt Pool Temperature Control for Laser Metal Deposition Processes—Part I: Online Temperature Control Journal of Manufacturing Science and Engineering-Transactions of the Asme. 132: 11010. DOI: 10.1115/1.4000882 |
0.365 |
|
| 2009 |
Zhao X, Kalya P, Landers RG, Krishnamurthy K. Empirical Dynamic Modeling of Friction Stir Welding Processes Journal of Manufacturing Science and Engineering-Transactions of the Asme. 131: 21001. DOI: 10.1115/1.3075872 |
0.419 |
|
| 2009 |
Tang L, Ruan J, Landers RG, Liou F. Variable powder flow rate control in laser metal deposition processes 2008 Proceedings of the Asme Dynamic Systems and Control Conference, Dscc 2008. 613-620. DOI: 10.1115/1.2953074 |
0.353 |
|
| 2009 |
Mason MS, Huang T, Landers RG, Leu MC, Hilmas GE. Aqueous-based extrusion of high solids loading ceramic pastes: Process modeling and control Journal of Materials Processing Technology. 209: 2946-2957. DOI: 10.1016/J.Jmatprotec.2008.07.004 |
0.444 |
|
| 2008 |
Zhao X, Kalya P, Landers RG, Krishnamurthy K. Design and Implementation of Nonlinear Force Controllers for Friction Stir Welding Processes Journal of Manufacturing Science and Engineering-Transactions of the Asme. 130: 61011. DOI: 10.1115/1.3006326 |
0.429 |
|
| 2008 |
Zhang H, Landers RG, Miller BA. Real-Time Force and Moment Estimation for Mechanical Gas Face Seal Systems Using Reduced-Order Kalman Filters Journal of Dynamic Systems Measurement and Control-Transactions of the Asme. 130: 51001. DOI: 10.1115/1.2936383 |
0.31 |
|
| 2008 |
Tang L, Landers RG, Balakrishnan SN. Parallel Turning Process Parameter Optimization Based on a Novel Heuristic Approach Journal of Manufacturing Science and Engineering-Transactions of the Asme. 130: 31002. DOI: 10.1115/1.2823077 |
0.364 |
|
| 2008 |
Landers RG, Ulsoy AG. Nonlinear feed effect in machining chatter analysis Journal of Manufacturing Science and Engineering, Transactions of the Asme. 130: 0110171-0110178. DOI: 10.1115/1.2783276 |
0.595 |
|
| 2008 |
Landers RG. Error Space Motion Control Methodology for Complex Contours Asian Journal of Control. 7: 20-28. DOI: 10.1111/J.1934-6093.2005.Tb00224.X |
0.328 |
|
| 2008 |
Yang Y, Kalya P, Landers RG, Krishnamurthy K. Automatic gap detection in friction stir butt welding operations International Journal of Machine Tools & Manufacture. 48: 1161-1169. DOI: 10.1016/J.Ijmachtools.2008.01.007 |
0.358 |
|
| 2007 |
Zhang H, Landers RG. Precision Motion Control Methodology for Complex Contours Journal of Manufacturing Science and Engineering-Transactions of the Asme. 129: 1060-1068. DOI: 10.1115/1.2769728 |
0.39 |
|
| 2007 |
Liou F, Slattery K, Kinsella M, Newkirk J, Chou HN, Landers R. Applications of a hybrid manufacturing process for fabrication of metallic structures Rapid Prototyping Journal. 13: 236-244. DOI: 10.1108/13552540710776188 |
0.377 |
|
| 2006 |
Zhang H, Miller BA, Landers RG. Nonlinear Modeling of Mechanical Gas Face Seal Systems Using Proper Orthogonal Decomposition Journal of Tribology-Transactions of the Asme. 128: 817-827. DOI: 10.1115/1.2345405 |
0.335 |
|
| 2006 |
Yelma SS, Miller BA, Landers RG. Clearance regulation of mechanical gas face seals: Part II - Analysis and control Tribology Transactions. 49: 373-386. DOI: 10.1080/05698190600678721 |
0.367 |
|
| 2006 |
Yelma SS, Miller BA, Landers RG. Clearance Regulation of Mechanical Gas Face Seals: Part I—Modeling Tribology Transactions. 49: 361-372. DOI: 10.1080/05698190600678713 |
0.321 |
|
| 2006 |
Thayalan V, Landers RG. Regulation of Powder Mass Flow Rate in Gravity-Fed Powder Feeder Systems Journal of Manufacturing Processes. 8: 121-132. DOI: 10.1016/S1526-6125(06)80007-1 |
0.334 |
|
| 2006 |
Tang Y, Landers RG, Balakrishnan SN. Hierarchical optimal force–position–contour control of machining processes Control Engineering Practice. 14: 909-922. DOI: 10.1016/J.Conengprac.2005.05.005 |
0.472 |
|
| 2005 |
Pan H, Landers RG, Liou F. Dynamic Modeling of Powder Delivery Systems in Gravity-Fed Powder Feeders Journal of Manufacturing Science and Engineering. 128: 337-345. DOI: 10.1115/1.2120778 |
0.307 |
|
| 2005 |
Pandurangan B, Landers RG, Balakrishnan SN. Hierarchical optimal force-position control of a turning process Ieee Transactions On Control Systems Technology. 13: 321-327. DOI: 10.1109/Tcst.2004.839573 |
0.43 |
|
| 2004 |
Liang SY, Hecker RL, Landers RG. Machining Process Monitoring and Control: The State-of-the-Art Journal of Manufacturing Science and Engineering-Transactions of the Asme. 126: 297-310. DOI: 10.1115/1.1707035 |
0.435 |
|
| 2004 |
Yelma SS, Miller BA, Landers RG. Automatic feedback control of mechanical gas face seals via clearance control Tribology Transactions. 47: 500-507. DOI: 10.1080/05698190490494822 |
0.385 |
|
| 2004 |
Landers RG, Ulsoy AG, Ma YH. A comparison of model-based machining force control approaches International Journal of Machine Tools and Manufacture. 44: 733-748. DOI: 10.1016/J.Ijmachtools.2004.02.005 |
0.628 |
|
| 2003 |
Kim SI, Landers RG, Ulsoy AG. Robust machining force control with process compensation Journal of Manufacturing Science and Engineering, Transactions of the Asme. 125: 423-430. DOI: 10.1115/1.1580849 |
0.632 |
|
| 2001 |
Landers RG, Min BK, Koren Y. Reconfigurable machine tools Cirp Annals - Manufacturing Technology. 50: 269-274. DOI: 10.1016/S0007-8506(07)62120-9 |
0.362 |
|
| 2000 |
Landers RG, Ulsoy AG. Model-Based Machining Force Control Journal of Dynamic Systems Measurement and Control-Transactions of the Asme. 122: 521-527. DOI: 10.1115/1.1286821 |
0.471 |
|
| 1998 |
Landers RG, Ulsoy GA. Supervisory Machining Control: Design Approach and Experiments Cirp Annals. 47: 301-306. DOI: 10.1016/S0007-8506(07)62838-8 |
0.398 |
|
| Show low-probability matches. |