| Year |
Citation |
Score |
| 2018 |
Malito LG, Arevalo S, Kozak A, Spiegelberg S, Bellare A, Pruitt L. Material properties of ultra-high molecular weight polyethylene: Comparison of tension, compression, nanomechanics and microstructure across clinical formulations. Journal of the Mechanical Behavior of Biomedical Materials. 83: 9-19. PMID 29656241 DOI: 10.1016/J.Jmbbm.2018.03.029 |
0.742 |
|
| 2017 |
Bracco P, Bellare A, Bistolfi A, Affatato S. Ultra-High Molecular Weight Polyethylene: Influence of the Chemical, Physical and Mechanical Properties on the Wear Behavior. A Review. Materials (Basel, Switzerland). 10. PMID 28773153 DOI: 10.3390/Ma10070791 |
0.348 |
|
| 2017 |
Regis M, Bellare A, Pascolini T, Bracco P. Characterization of thermally annealed PEEK and CFR-PEEK composites: Structure-properties relationships Polymer Degradation and Stability. 136: 121-130. DOI: 10.1016/J.Polymdegradstab.2016.12.005 |
0.352 |
|
| 2016 |
Lombardo G, Bracco P, Thornhill TS, Bellare A. Crystallization pathways to alter the nanostructure and tensile properties of non-irradiated and irradiated, vitamin e stabilized UHMWPE European Polymer Journal. 75: 354-362. DOI: 10.1016/J.Eurpolymj.2015.12.028 |
0.373 |
|
| 2014 |
George A, Ngo HD, Bellare A. Influence of crystallization conditions on the tensile properties of radiation crosslinked, vitamin E stabilized UHMWPE. Journal of the Mechanical Behavior of Biomedical Materials. 40: 406-12. PMID 25305634 DOI: 10.1016/J.Jmbbm.2014.09.011 |
0.316 |
|
| 2014 |
Abreu EL, Ngo HD, Bellare A. Characterization of network parameters for UHMWPE by plane strain compression Journal of the Mechanical Behavior of Biomedical Materials. 32: 1-7. PMID 24384413 DOI: 10.1016/J.Jmbbm.2013.12.004 |
0.364 |
|
| 2009 |
Bistolfi A, Turell MB, Lee YL, Bellare A. Tensile and tribological properties of high-crystallinity radiation crosslinked UHMWPE Journal of Biomedical Materials Research - Part B Applied Biomaterials. 90: 137-144. PMID 18985795 DOI: 10.1002/Jbm.B.31265 |
0.365 |
|
| 2006 |
Simis KS, Bistolfi A, Bellare A, Pruitt LA. The combined effects of crosslinking and high crystallinity on the microstructural and mechanical properties of ultra high molecular weight polyethylene Biomaterials. 27: 1688-1694. PMID 16253325 DOI: 10.1016/J.Biomaterials.2005.09.033 |
0.372 |
|
| 2006 |
Pavoor PV, Gearing BP, Muratoglu O, Cohen RE, Bellare A. Wear reduction of orthopaedic bearing surfaces using polyelectrolyte multilayer nanocoatings. Biomaterials. 27: 1527-33. PMID 16174529 DOI: 10.1016/J.Biomaterials.2005.08.022 |
0.724 |
|
| 2005 |
Turell ME, Friedlaender GE, Wang A, Thornhill TS, Bellare A. The effect of counterface roughness on the wear of UHMWPE for rectangular wear paths Wear. 259: 984-991. DOI: 10.1016/J.Wear.2005.01.050 |
0.338 |
|
| 2004 |
Turell MB, Bellare A. A study of the nanostructure and tensile properties of ultra-high molecular weight polyethylene Biomaterials. 25: 3389-3398. PMID 15020111 DOI: 10.1016/J.Biomaterials.2003.10.027 |
0.393 |
|
| 2004 |
Pavoor PV, Bellare A, Strom A, Yang D, Cohen RE. Mechanical characterization of polyelectrolyte multilayers using quasi-static nanoindentation Macromolecules. 37: 4865-4871. DOI: 10.1021/Ma049777T |
0.712 |
|
| 2004 |
Pavoor PV, Gearing BP, Bellare A, Cohen RE. Tribological characteristics of polyelectrolyte multilayers Wear. 256: 1196-1207. DOI: 10.1016/J.Wear.2003.10.009 |
0.721 |
|
| 2004 |
Pavoor PV, Gearing BP, Gorga RE, Bellare A, Cohen RE. Engineering the friction-and-wear behavior of polyelectrolyte multilayer nanoassemblies through block copolymer surface capping, metallic nanoparticles, and multiwall carbon nanotubes Journal of Applied Polymer Science. 92: 439-448. DOI: 10.1002/App.20011 |
0.658 |
|
| 2004 |
Pavoor PV, Gearing BP, Gorga RE, Bellare A, Cohen RE. Engineering the Friction-and-Wear Behavior of Polyelectrolyte Multilayer Nanoassemblies Through Block Copolymer Surface Capping, Metallic Nanoparticles, and Multiwall Carbon Nanotubes Journal of Applied Polymer Science. 92: 439-448. |
0.696 |
|
| 2003 |
Turell M, Wang A, Bellare A. Quantification of the effect of cross-path motion on the wear rate of ultra-high molecular weight polyethylene Wear. 255: 1034-1039. DOI: 10.1016/S0043-1648(03)00357-0 |
0.312 |
|
| 2002 |
Chang MY, Abuzaina FM, Kim WG, Gupton JP, Garetz BA, Newstein MC, Balsara NP, Yang L, Gido SP, Cohen RE, Boontongkong Y, Bellare A. Analysis of grain structure in partially ordered block copolymers by depolarized light scattering and transmission electron microscopy Macromolecules. 35: 4437-4447. DOI: 10.1021/Ma0201025 |
0.743 |
|
| 2000 |
Chang N, Bellare A, Cohen RE, Spector M. Wear behavior of bulk oriented and fiber reinforced UHMWPE Wear. 241: 109-117. DOI: 10.1016/S0043-1648(00)00393-8 |
0.557 |
|
| 1999 |
Myers RT, Cohen RE, Bellare A. Use of Ultra-Small-Angle X-ray Scattering To Measure Grain Size of Lamellar Styrene−Butadiene Block Copolymers Macromolecules. 32: 2706-2711. DOI: 10.1021/Ma9816618 |
0.699 |
|
| 1999 |
Premnath V, Bellare A, Merrill EW, Jasty M, Harris WH. Molecular rearrangements in ultra high molecular weight polyethylene after irradiation and long-term storage in air Polymer. 40: 2215-2229. DOI: 10.1016/S0032-3861(98)00438-8 |
0.312 |
|
| 1999 |
Myers RT, Karbach A, Bellare A, Cohen RE. Ultra-small-angle x-ray scattering and transmission electron microscopy studies probing grain size of lamellar styrene-butadiene block copolymers Acs Symposium Series. 739: 436-447. |
0.554 |
|
| 1999 |
Myers RT, Cohen RE, Bellare A. Use of Ultra-Small-Angle X-ray Scattering to Measure Grain Size of Lamellar Styrene-Butadiene Block Copolymers Macromolecules. 32: 2706-2711. |
0.552 |
|
| 1998 |
Boontongkong Y, Cohen RE, Spector M, Bellare A. Orientation of plane strain-compressed ultra-high-molecular-weight polyethylene Polymer. 39: 6391-6400. DOI: 10.1016/S0032-3861(98)00163-3 |
0.768 |
|
| 1998 |
Mukai U, Cohen RE, Bellare A, Albalak RJ. The influence of melt processing on the spatial organization of polymer chains in a crystallizable diblock copolymer of nylon 6 and PDMS Journal of Applied Polymer Science. 70: 1985-1990. DOI: 10.1002/(Sici)1097-4628(19981205)70:10<1985::Aid-App14>3.0.Co;2-V |
0.763 |
|
| 1998 |
Mukai U, Cohen RE, Bellare A, Albaiak RJ. The influence of melt processing on the spatial organization of polymer chains in a crystallizable diblock copolymer of nylon 6 and PDMS Journal of Applied Polymer Science. 70: 1985-1990. |
0.755 |
|
| 1998 |
Boontongkong Y, Cohen RE, Spector M, Bellare A. Orientation of plane strain-compressed ultra-high-molecular-weight polyethylene Polymer. 39: 6391-6400. |
0.76 |
|
| 1996 |
Ries MD, Bellare A, Livingston BJ, Cohen RE, Spector M. Early delamination of a Hylamer-M tibial insert. The Journal of Arthroplasty. 11: 974-6. PMID 8986578 DOI: 10.1016/S0883-5403(96)80143-4 |
0.469 |
|
| 1996 |
Bellare A, Cohen RE. Morphology of rod stock and compression-moulded sheets of ultra-high-molecular-weight polyethylene used in orthopaedic implants. Biomaterials. 17: 2325-33. PMID 8982472 DOI: 10.1016/S0142-9612(96)00086-5 |
0.634 |
|
| 1995 |
Bellare A, Schnablegger H, Cohen RE. A small-angle X-ray scattering study of high-density polyethylene and ultrahigh molecular weight polyethylene Macromolecules. 28: 7585-7588. DOI: 10.1021/Ma00127A001 |
0.589 |
|
| 1994 |
Cohen RE, Bellare A, Drzewinski MA. Spatial Organization of Polymer Chains in a Crystallizable Diblock Copolymer of Polyethylene and Polystyrene Macromolecules. 27: 2321-2323. DOI: 10.1021/Ma00086A053 |
0.597 |
|
| 1994 |
Cohen RE, Bellare A, Drzewinski MA. Spatial organization of polymer chains in a crystallizable diblock copolymer of polyethylene and polystyrene Macromolecules. 27: 2321-2323. |
0.756 |
|
| 1993 |
Bellare A, Cohen RE, Argon AS. Development of texture in poly(ethylene terephthalate) by plane-strain compression Polymer. 34: 1393-1403. DOI: 10.1016/0032-3861(93)90851-Z |
0.677 |
|
| Show low-probability matches. |
