Year |
Citation |
Score |
2020 |
Munagala VNV, Bessette S, Gauvin R, Chromik RR. Sliding wear of cold sprayed Ti6Al4V coatings: Effect of porosity and normal load Wear. 203268. DOI: 10.1016/J.Wear.2020.203268 |
0.379 |
|
2020 |
Behera P, Lee L, Rajagopalan SK, Chromik RR, Yue S. Friction transitions and connections to third bodies for a Cd coating on steel substrate Friction. 8: 784-801. DOI: 10.1007/S40544-019-0333-Z |
0.347 |
|
2019 |
Munagala VNV, Torgerson TB, Scharf TW, Chromik RR. High temperature friction and wear behavior of cold-sprayed Ti6Al4V and Ti6Al4V-TiC composite coatings Wear. 357-369. DOI: 10.1016/J.Wear.2018.11.032 |
0.41 |
|
2019 |
Zhang Y, Descartes S, Chromik RR. Influence of WC on third body behaviour during fretting of cold-sprayed Cu MoS2WC composites Tribology International. 134: 15-25. DOI: 10.1016/J.Triboint.2019.01.033 |
0.354 |
|
2019 |
Imbriglio S, Hassani-Gangaraj M, Veysset D, Aghasibeig M, Gauvin R, Nelson K, Schuh C, Chromik R. Adhesion strength of titanium particles to alumina substrates: A combined cold spray and LIPIT study Surface and Coatings Technology. 361: 403-412. DOI: 10.1016/J.Surfcoat.2019.01.071 |
0.309 |
|
2019 |
A. Alidokht S, Yue S, Chromik RR. Effect of WC morphology on dry sliding wear behavior of cold-sprayed Ni-WC composite coatings Surface and Coatings Technology. 357: 849-863. DOI: 10.1016/J.Surfcoat.2018.10.082 |
0.394 |
|
2019 |
Munagala VNV, Imbriglio SI, Chromik RR. The influence of powder properties on the adhesion strength and microstructural evolution of cold sprayed Ti6Al4V single splats Materials Letters. 244: 58-61. DOI: 10.1016/J.Matlet.2019.02.028 |
0.393 |
|
2019 |
Zhang Y, Choudhuri D, Scharf TW, Descartes S, Chromik RR. Tribologically induced nanolaminate in a cold-sprayed WC-reinforced Cu matrix composite: a key to high wear resistance Materials & Design. 182: 108009. DOI: 10.1016/J.Matdes.2019.108009 |
0.372 |
|
2019 |
Alidokht SA, Lengaigne J, Klemberg-Sapieha JE, Yue S, Chromik RR. Effect of Microstructure and Properties of Ni-WC Composite Coatings on Their Solid Particle Erosion Behavior Journal of Materials Engineering and Performance. 28: 1532-1543. DOI: 10.1007/S11665-019-03956-W |
0.412 |
|
2019 |
Ajaja J, Jomaa W, Bocher P, Chromik RR, Songmene V, Brochu M. Hard turning multi-performance optimization for improving the surface integrity of 300M ultra-high strength steel The International Journal of Advanced Manufacturing Technology. 104: 141-157. DOI: 10.1007/S00170-019-03863-3 |
0.309 |
|
2018 |
Athanasiadou D, Jiang W, Goldbaum D, Saleem A, Basu K, Pacella MS, Böhm CF, Chromik RR, Hincke MT, Rodríguez-Navarro AB, Vali H, Wolf SE, Gray JJ, Bui KH, McKee MD. Nanostructure, osteopontin, and mechanical properties of calcitic avian eggshell. Science Advances. 4: eaar3219. PMID 29725615 DOI: 10.1126/Sciadv.Aar3219 |
0.311 |
|
2018 |
Lee L, Behera P, Sriraman KR, Chromik RR. The effect of contact stress on the sliding wear behaviour of Zn-Ni electrodeposited coatings Wear. 82-92. DOI: 10.1016/J.Wear.2017.12.018 |
0.39 |
|
2018 |
Lee L, Descartes S, Chromik R. Comparison of fretting behaviour of electrodeposited Zn-Ni and Cd coatings Tribology International. 120: 535-546. DOI: 10.1016/J.Triboint.2018.01.021 |
0.393 |
|
2018 |
Zhang Y, Epshteyn Y, Chromik RR. Dry sliding wear behaviour of cold-sprayed Cu-MoS2 and Cu-MoS2-WC composite coatings: The influence of WC Tribology International. 123: 296-306. DOI: 10.1016/J.Triboint.2017.12.015 |
0.403 |
|
2018 |
Torgerson T, Harris M, Alidokht S, Scharf T, Aouadi S, Chromik R, Zabinski J, Voevodin A. Room and elevated temperature sliding wear behavior of cold sprayed Ni-WC composite coatings Surface and Coatings Technology. 350: 136-145. DOI: 10.1016/J.Surfcoat.2018.05.090 |
0.425 |
|
2018 |
Saleem A, Goldbaum D, Brodusch N, Gauvin R, Chromik RR. Microstructure and mechanical property connections for a punched non-oriented electrical steel lamination Materials Science and Engineering: A. 725: 456-465. DOI: 10.1016/J.Msea.2018.04.054 |
0.358 |
|
2018 |
Imbriglio SI, Brodusch N, Aghasibeig M, Gauvin R, Chromik RR. Influence of Substrate Characteristics on Single Ti Splat Bonding to Ceramic Substrates by Cold Spray Journal of Thermal Spray Technology. 27: 1011-1024. DOI: 10.1007/S11666-018-0743-X |
0.373 |
|
2018 |
Munagala VNV, Akinyi V, Vo P, Chromik RR. Influence of Powder Morphology and Microstructure on the Cold Spray and Mechanical Properties of Ti6Al4V Coatings Journal of Thermal Spray Technology. 27: 827-842. DOI: 10.1007/S11666-018-0729-8 |
0.4 |
|
2017 |
Manimunda P, Al-Azizi A, Kim SH, Chromik RR. Shear-Induced Structural Changes and Origin of Ultra-low Friction of Hydrogenated Diamond-like Carbon (DLC) in Dry Environment. Acs Applied Materials & Interfaces. PMID 28459534 DOI: 10.1021/Acsami.7B03360 |
0.34 |
|
2017 |
Lee L, Behera P, Sriraman KR, Chromik RR. Effects of humidity on the sliding wear properties of Zn–Ni alloy coatings Rsc Advances. 7: 22662-22671. DOI: 10.1039/C6Ra27352A |
0.392 |
|
2017 |
Alidokht SA, Vo P, Yue S, Chromik RR. Erosive wear behavior of Cold-Sprayed Ni-WC composite coating Wear. 566-577. DOI: 10.1016/J.Wear.2017.01.052 |
0.406 |
|
2017 |
Shockley JM, Rauch EF, Chromik RR, Descartes S. TEM microanalysis of interfacial structures after dry sliding of cold sprayed Al-Al2O3 Wear. 1411-1417. DOI: 10.1016/J.Wear.2016.12.052 |
0.346 |
|
2017 |
Alidokht SA, Vo P, Yue S, Chromik RR. Cold Spray Deposition of Ni and WC-Reinforced Ni Matrix Composite Coatings Journal of Thermal Spray Technology. 26: 1908-1921. DOI: 10.1007/S11666-017-0636-4 |
0.407 |
|
2017 |
Zhang Y, Brodusch N, Descartes S, Shockley JM, Gauvin R, Chromik RR. The Effect of Submicron Second-Phase Particles on the Rate of Grain Refinement in a Copper-Oxygen Alloy During Cold Spray Journal of Thermal Spray Technology. 26: 1509-1516. DOI: 10.1007/S11666-017-0603-0 |
0.35 |
|
2017 |
Alidokht SA, Munagala VNV, Chromik RR. Role of Third Bodies in Friction and Wear of Cold-Sprayed Ti and Ti–TiC Composite Coatings Tribology Letters. 65. DOI: 10.1007/S11249-017-0899-4 |
0.406 |
|
2016 |
Kermouche G, Jacquet G, Courbon C, Rech J, Zhang Y, Chromik R. Microstructure Evolution Induced by Sliding-Based Surface Thermomechanical Treatments - Application to Pure Copper Materials Science Forum. 879: 915-920. DOI: 10.4028/Www.Scientific.Net/Msf.879.915 |
0.311 |
|
2016 |
Saleem A, Alatawneh N, Chromik RR, Lowther DA. Effect of Shear Cutting on Microstructure and Magnetic Properties of Non-Oriented Electrical Steel Ieee Transactions On Magnetics. 52. DOI: 10.1109/Tmag.2015.2512920 |
0.321 |
|
2016 |
Sriraman KR, Manimunda P, Chromik RR, Yue S. Effect of crystallographic orientation on the tribological behavior of electrodeposited Zn coatings Rsc Advances. 6: 17360-17372. DOI: 10.1039/C5Ra15490A |
0.397 |
|
2016 |
Alidokht S, Manimunda P, Vo P, Yue S, Chromik R. Cold spray deposition of a Ni-WC composite coating and its dry sliding wear behavior Surface and Coatings Technology. 308: 424-434. DOI: 10.1016/J.Surfcoat.2016.09.089 |
0.418 |
|
2016 |
Goldbaum D, Manimuda P, Kamath G, Descartes S, Klemberg-Sapieha JE, Chromik RR. Tribological behavior of TiN and Ti (Si,C)N coatings on cold sprayed Ti substrates Surface and Coatings Technology. 291: 264-275. DOI: 10.1016/J.Surfcoat.2016.02.044 |
0.375 |
|
2016 |
Gallaugher M, Ding Y, Ghosh P, Chromik RR. Local Scale Microstructural Effects from the Deformation and Recrystallization of Non-Oriented Electrical Steels Metallurgical and Materials Transactions E. 3: 250-263. DOI: 10.1007/S40553-016-0082-0 |
0.341 |
|
2016 |
Zhang Y, Descartes S, Vo P, Chromik RR. Cold-Sprayed Cu-MoS2 and Its Fretting Wear Behavior Journal of Thermal Spray Technology. 25: 473-482. DOI: 10.1007/S11666-015-0372-6 |
0.42 |
|
2016 |
Zhang Y, Michael Shockley J, Vo P, Chromik RR. Tribological Behavior of a Cold-Sprayed Cu-MoS2 Composite Coating during Dry Sliding Wear Tribology Letters. 62. DOI: 10.1007/S11249-016-0646-2 |
0.426 |
|
2015 |
Goldbaum D, Chromik RR, Brodusch N, Gauvin R. Microstructure and Mechanical Properties of Ti Cold-Spray Splats Determined by Electron Channeling Contrast Imaging and Nanoindentation Mapping. Microscopy and Microanalysis : the Official Journal of Microscopy Society of America, Microbeam Analysis Society, Microscopical Society of Canada. 21: 570-81. PMID 25739402 DOI: 10.1017/S1431927615000240 |
0.387 |
|
2015 |
Sorour AA, Chromik RR, Brochu M. Microstructure and densification of gas atomised Fe-Cr-B based alloy powder consolidated by spark plasma sintering Powder Metallurgy. 58: 20-29. DOI: 10.1179/1743290114Y.0000000095 |
0.328 |
|
2015 |
Lee L, Régis É, Descartes S, Chromik RR. Fretting wear behavior of Zn-Ni alloy coatings Wear. 330: 112-121. DOI: 10.1016/J.Wear.2015.02.043 |
0.419 |
|
2015 |
Shockley JM, Descartes S, Vo P, Irissou E, Chromik RR. The influence of Al2O3 particle morphology on the coating formation and dry sliding wear behavior of cold sprayed Al-Al2O3 composites Surface and Coatings Technology. 270: 324-333. DOI: 10.1016/J.Surfcoat.2015.01.057 |
0.304 |
|
2015 |
Qian JC, Zhou ZF, Yan C, Li DJ, Li KY, Descartes S, Chromik R, Zhang WJ, Bello I, Martinu L, Klemberg-Sapieha JE. Tailoring the mechanical and tribological properties of sputtered boron carbide films via the B1-xCx composition Surface and Coatings Technology. 267: 2-7. DOI: 10.1016/J.Surfcoat.2014.10.003 |
0.331 |
|
2014 |
Zhang Y, Brodusch N, Descartes S, Chromik RR, Gauvin R. Microstructure refinement of cold-sprayed copper investigated by electron channeling contrast imaging. Microscopy and Microanalysis : the Official Journal of Microscopy Society of America, Microbeam Analysis Society, Microscopical Society of Canada. 20: 1499-506. PMID 24960434 DOI: 10.1017/S1431927614001664 |
0.359 |
|
2014 |
Ding Y, Gallaugher M, Brodusch N, Gauvin R, Chromik RR. Coating induced residual stress in nonoriented electrical steel laminations Journal of Materials Research. 29: 1737-1746. DOI: 10.1557/Jmr.2014.218 |
0.348 |
|
2014 |
Zhang Y, Brodusch N, Michael Shockley J, Gauvin R, Chromik RR. Sliding-induced microstructure of cold-sprayed copper coating observed by electron channeling contrast imaging Microscopy and Microanalysis. 20: 2104-2105. DOI: 10.1017/S1431927614012252 |
0.327 |
|
2014 |
Ding Y, Gallaugher M, Brodusch N, Gauvin R, Chromik RR. Effect of a coating induced residual stress on magnetic domain structure in non-oriented electrical steels Microscopy and Microanalysis. 20: 894-895. DOI: 10.1017/S1431927614006199 |
0.343 |
|
2014 |
Ghosh P, Chromik RR, Knight AM, Wakade SG. Effect of metallurgical factors on the bulk magnetic properties of non-oriented electrical steels Journal of Magnetism and Magnetic Materials. 356: 42-51. DOI: 10.1016/J.Jmmm.2013.12.052 |
0.306 |
|
2014 |
Kaboli S, Goldbaum D, Chromik RR, Gauvin R. Microstructural Characterization of Mg-0.3Al-0.2Ca Alloy Using Ion Milling Surface Preparation Technique Metallography, Microstructure, and Analysis. 3: 257-262. DOI: 10.1007/S13632-014-0149-1 |
0.316 |
|
2014 |
Shockley JM, Descartes S, Irissou E, Legoux JG, Chromik RR. Third body behavior during dry sliding of cold-sprayed Al-Al 2O3 composites: In situ tribometry and microanalysis Tribology Letters. 54: 191-206. DOI: 10.1007/S11249-014-0326-Z |
0.35 |
|
2013 |
Kaboli S, Goldbaum D, Chromik RR, Gauvin R. Electron channeling contrast imaging of plastic deformation induced by indentation in polycrystalline nickel. Microscopy and Microanalysis : the Official Journal of Microscopy Society of America, Microbeam Analysis Society, Microscopical Society of Canada. 19: 1620-31. PMID 24119314 DOI: 10.1017/S1431927613013469 |
0.321 |
|
2013 |
Milligan J, Shockley JM, Chromik RR, Brochu M. Tribological performance of Al-12Si coatings created via Electrospark Deposition and Spark Plasma Sintering Tribology International. 66: 1-11. DOI: 10.1016/J.Triboint.2013.04.006 |
0.377 |
|
2013 |
Shockley JM, Strauss HW, Chromik RR, Brodusch N, Gauvin R, Irissou E, Legoux JG. In situ tribometry of cold-sprayed Al-Al2O3 composite coatings Surface and Coatings Technology. 215: 350-356. DOI: 10.1016/J.Surfcoat.2012.04.099 |
0.397 |
|
2013 |
Sorour AA, Chromik RR, Gauvin R, Jung IH, Brochu M. Understanding the solidification and microstructure evolution during CSC-MIG welding of Fe-Cr-B-based alloy Materials Characterization. 86: 127-138. DOI: 10.1016/J.Matchar.2013.09.017 |
0.334 |
|
2013 |
Gallaugher M, Peykov D, Brodusch N, Chromik RR, Rodrigue L, Trudeau ML, Gauvin R. Variations in nanomechanical properties of back-end Zr-2.5Nb pressure tube material Journal of Nuclear Materials. 442: 116-123. DOI: 10.1016/J.Jnucmat.2013.08.047 |
0.318 |
|
2013 |
Sorour AA, Chromik RR, Brochu M. Tribology of a Fe-Cr-B-Based Alloy Coating Fabricated by a Controlled Short-Circuit MIG Welding Process Metallography, Microstructure, and Analysis. 2: 223-233. DOI: 10.1007/S13632-013-0081-9 |
0.353 |
|
2012 |
Shariff T, Cao XJ, Chromik R, Baradari JG, Wanjara P, Cuddy J, Birur A. Specific Energy as a Characterizing Parameter for Laser Welded Ti-5Al-5V-5Mo-3Cr Alloy Materials Science Forum. 2931-2936. DOI: 10.4028/Www.Scientific.Net/Msf.706-709.2931 |
0.311 |
|
2012 |
Stoyanov P, Strauss HW, Chromik RR. Scaling effects between micro- and macro-tribology for a Ti-MoS 2 coating Wear. 274: 149-161. DOI: 10.1016/J.Wear.2011.08.021 |
0.345 |
|
2012 |
Sriraman KR, Strauss HW, Brahimi S, Chromik RR, Szpunar JA, Osborne JH, Yue S. Tribological behavior of electrodeposited Zn, Zn-Ni, Cd and Cd-Ti coatings on low carbon steel substrates Tribology International. 56: 107-120. DOI: 10.1016/J.Triboint.2012.06.008 |
0.394 |
|
2012 |
Stoyanov P, Gupta S, Chromik RR, Lince JR. Microtribological performance of Au-MoS 2 nanocomposite and Au/MoS 2 bilayer coatings Tribology International. 52: 144-152. DOI: 10.1016/J.Triboint.2012.03.014 |
0.397 |
|
2012 |
Chromik RR, Strauss HW, Scharf TW. Materials phenomena revealed by in situ tribometry Jom. 64: 35-43. DOI: 10.1007/S11837-011-0229-5 |
0.386 |
|
2012 |
Goldbaum D, Shockley JM, Chromik RR, Rezaeian A, Yue S, Legoux JG, Irissou E. The effect of deposition conditions on adhesion strength of Ti and Ti6Al4V cold spray splats Journal of Thermal Spray Technology. 21: 288-303. DOI: 10.1007/S11666-011-9720-3 |
0.372 |
|
2012 |
Shariff T, Cao X, Chromik RR, Wanjara P, Cuddy J, Birur A. Effect of joint gap on the quality of laser beam welded near-β Ti-5553 alloy with the addition of Ti-6Al-4V filler wire Journal of Materials Science. 47: 866-875. DOI: 10.1007/S10853-011-5866-0 |
0.335 |
|
2011 |
Shariff T, Cao X, Chromik RR, Baradari JG, Wanjara P, Cuddy J, Birur A. Laser welding of Ti-5Al-5V-5Mo-3Cr Canadian Metallurgical Quarterly. 50: 263-272. DOI: 10.1179/1879139511Y.0000000009 |
0.326 |
|
2011 |
Strauss HW, Chromik RR, Hassani S, Klemberg-Sapieha JE. In situ tribology of nanocomposite Ti-Si-C-H coatings prepared by PE-CVD Wear. 272: 133-148. DOI: 10.1016/J.Wear.2011.08.001 |
0.398 |
|
2011 |
Goldbaum D, Ajaja J, Chromik RR, Wong W, Yue S, Irissou E, Legoux JG. Mechanical behavior of Ti cold spray coatings determined by a multi-scale indentation method Materials Science and Engineering A. 530: 253-265. DOI: 10.1016/J.Msea.2011.09.083 |
0.385 |
|
2011 |
Ajaja J, Goldbaum D, Chromik RR. Characterization of Ti cold spray coatings by indentation methods Acta Astronautica. 69: 923-928. DOI: 10.1016/J.Actaastro.2011.06.012 |
0.408 |
|
2011 |
Goldbaum D, Chromik RR, Yue S, Irissou E, Legoux JG. Mechanical property mapping of cold sprayed Ti splats and coatings Journal of Thermal Spray Technology. 20: 486-496. DOI: 10.1007/S11666-010-9546-4 |
0.369 |
|
2011 |
Sorour AA, Strauss HW, Chromik RR, Brochu M. Microstructure and tribology of spark plasma sintered Fe-Cr-B metamorphic alloy powder Tribology Letters. 44: 269-278. DOI: 10.1007/S11249-011-9845-Z |
0.376 |
|
2010 |
Chromik RR, Goldbaum D, Shockley JM, Yue S, Irissou E, Legoux JG, Randall NX. Modified ball bond shear test for determination of adhesion strength of cold spray splats Surface and Coatings Technology. 205: 1409-1414. DOI: 10.1016/J.Surfcoat.2010.07.037 |
0.373 |
|
2010 |
Stoyanov P, Chromik RR, Gupta S, Lince JR. Micro-scale sliding contacts on Au and Au-MoS2 coatings Surface and Coatings Technology. 205: 1449-1454. DOI: 10.1016/J.Surfcoat.2010.07.026 |
0.391 |
|
2010 |
Fukuda H, Szpunar JA, Kondoh K, Chromik R. The influence of carbon nanotubes on the corrosion behaviour of AZ31B magnesium alloy Corrosion Science. 52: 3917-3923. DOI: 10.1016/J.Corsci.2010.08.009 |
0.301 |
|
2010 |
Rebelo De Figueiredo M, Muratore C, Franz R, Chromik RR, Wahl KJ, Voevodin AA, O'Sullivan M, Lechthaler M, Mitterer C. In situ studies of TiC 1-x N x hard coating tribology Tribology Letters. 40: 365-373. DOI: 10.1007/S11249-010-9664-7 |
0.377 |
|
2010 |
Stoyanov P, Chromik RR, Goldbaum D, Lince JR, Zhang X. Microtribological performance of Au-MoS 2 and Ti-MoS 2 coatings with varying contact pressure Tribology Letters. 40: 199-211. DOI: 10.1007/S11249-010-9657-6 |
0.412 |
|
2008 |
Chromik RR, Winfrey AL, Lüning J, Nemanich RJ, Wahl KJ. Run-in behavior of nanocrystalline diamond coatings studied by in situ tribometry Wear. 265: 477-489. DOI: 10.1016/J.Wear.2007.11.023 |
0.375 |
|
2008 |
Stoyanov P, Fishman JZ, Lince JR, Chromik RR. Micro-tribological performance of MoS2 lubricants with varying Au content Surface and Coatings Technology. 203: 761-765. DOI: 10.1016/J.Surfcoat.2008.08.028 |
0.372 |
|
2007 |
Chromik RR, Baker CC, Voevodin AA, Wahl KJ. In situ tribometry of solid lubricant nanocomposite coatings Wear. 262: 1239-1252. DOI: 10.1016/J.Wear.2007.01.001 |
0.369 |
|
2007 |
Lin MT, Chromik RR, Barbosa N, El-Deiry P, Hyun S, Brown WL, Vinci RP, Delph TJ. The influence of vanadium alloying on the elevated-temperature mechanical properties of thin gold films Thin Solid Films. 515: 7919-7925. DOI: 10.1016/J.Tsf.2007.04.025 |
0.379 |
|
2007 |
Baker CC, Chromik RR, Wahl KJ, Hu JJ, Voevodin AA. Preparation of chameleon coatings for space and ambient environments Thin Solid Films. 515: 6737-6743. DOI: 10.1016/J.Tsf.2007.02.005 |
0.358 |
|
2006 |
Chromik RR, Baker CC, Voevodin AA, Wahl KJ. In Situ optical tribometry studies of nanocomposite coatings Materials Research Society Symposium Proceedings. 890: 275-280. DOI: 10.1557/Proc-0890-Y05-05-Nn07-05 |
0.376 |
|
2005 |
Chromik RR, Wang DN, Shugar A, Limata L, Notis MR, Vinci RP. Mechanical properties of intermetallic compounds in the Au-Sn system Journal of Materials Research. 20: 2161-2172. DOI: 10.1557/Jmr.2005.0269 |
0.392 |
|
2004 |
Allen SL, Notis MR, Chromik RR, Vinci RP, Lewis DJ, Schaefer R. Microstructural evolution in lead-free solder alloy: Part II. Directionally solidified Sn-Ag-Cu, Sn-Cu and Sn-Ag Journal of Materials Research. 19: 1425-1431. DOI: 10.1557/Jmr.2004.0191 |
0.372 |
|
2004 |
Allen SL, Notis MR, Chromik RR, Vinci RP. Microstructural evolution in lead-free solder alloys: Part I. Cast Sn-Ag-Cu eutectic Journal of Materials Research. 19: 1417-1424. DOI: 10.1557/Jmr.2004.0190 |
0.367 |
|
2003 |
Chromik RR, Vinci RP, Allen SL, Notis MR. Nanoindentation measurements on Cu-Sn and Ag-Sn intermetallics formed in Pb-free solder joints Journal of Materials Research. 18: 2251-2261. DOI: 10.1557/Jmr.2003.0314 |
0.386 |
|
2003 |
Chromik RR, Vinci RP, Allen SL, Notis MR. Measuring the mechanical properties of Pb-free solder and Sn-based intermetallics by nanoindentation Jom. 55: 66-69. DOI: 10.1007/S11837-003-0144-5 |
0.358 |
|
2002 |
Chromik RR, Zavalij L, Johnson MD, Cotts EJ. Calorimetric investigation of the formation of metastable silicides in Au/a-Si thin film multilayers Journal of Applied Physics. 91: 8992-8998. DOI: 10.1063/1.1432774 |
0.615 |
|
2002 |
Zavalij L, Zribi A, Chromik RR, Pitely S, Zavalij PY, Cotts EJ. Crystal structure of Au1-xNixSn4 intermetallic alloys Journal of Alloys and Compounds. 334: 79-85. DOI: 10.1016/S0925-8388(01)01780-7 |
0.73 |
|
2000 |
Zribi A, Chromik RR, Presthus R, Teed K, Zavalij L, De Vita J, To Va J, Cotts EJ, Clum JA, Erich R, Primavera A, Westby G, Coyle RJ, Wenger GM. Solder metallization interdiffusion in microelectronic interconnects Ieee Transactions On Components and Packaging Technologies. 23: 383-387. DOI: 10.1109/6144.846778 |
0.523 |
|
2000 |
Chromik RR, Neils WK, Cotts EJ. Erratum: “Thermodynamic and kinetic study of solid state reactions in the Cu–Si system” [J. Appl. Phys. 86, 4273 (1999)] Journal of Applied Physics. 87: 4642-4642. DOI: 10.1063/1.373120 |
0.552 |
|
1999 |
Zribi A, Chromik RR, Presthus R, Clum J, Teed K, Zavalij L, De Vita J, Tova J, Cotts EJ. Solder metalization interdiffusion in microelectronic interconnects Proceedings - Electronic Components and Technology Conference. 451-457. DOI: 10.1109/6144.846778 |
0.737 |
|
1999 |
Chromik RR, Neils WK, Cotts EJ. Thermodynamic and kinetic study of solid state reactions in the Cu-Si system Journal of Applied Physics. 86: 4273-4281. DOI: 10.1063/1.371357 |
0.639 |
|
1999 |
Zribi A, Chromik RR, Presthus R, Clum J, Zavalij L, Cotts EJ. Effect of Au-intermetallic compounds on mechanical reliability of Sn-Pb/Au-Ni-Cu joints American Society of Mechanical Engineers, Eep. 26. |
0.618 |
|
1998 |
Chromik RR, Neils WK, Cotts EJ. Formation of Cu3Si from Cu/a-Si multilayers Materials Research Society Symposium - Proceedings. 481: 581-586. DOI: 10.1557/Proc-481-581 |
0.617 |
|
1997 |
Chromik RR, Cotts EJ. Thermodynamic and kinetic study of phase transformations in solder/metal systems Materials Research Society Symposium - Proceedings. 445: 31-36. DOI: 10.1557/Proc-445-31 |
0.605 |
|
1997 |
Jiang N, Clum JA, Chromik RR, Cotts EJ. Thermal expansion of several Sn-based intermetallic compounds Scripta Materialia. 37: 1851-1854. DOI: 10.1016/S1359-6462(97)00355-2 |
0.575 |
|
1996 |
Chromik RR, Cotts EJ. Study of the kinetics and energetics of solid state reactions in Pd/Sn diffusion couples Materials Research Society Symposium - Proceedings. 398: 307-312. DOI: 10.1557/Proc-398-307 |
0.605 |
|
1996 |
Neils WK, Chromik RR, Dreyer KF, Grosman D, Cotts EJ. Calorimetric study of the energetics and kinetics of interdiffusion in Cu/Cu6Sn5 thin film diffusion couples Materials Research Society Symposium - Proceedings. 398: 313-318. DOI: 10.1063/1.114596 |
0.615 |
|
1995 |
Dreyer KF, Neils WK, Chromik RR, Grosman D, Cotts EJ. Calorimetric study of the energetics and kinetics of interdiffusion in Cu/Cu6Sn5 thin-film diffusion couples Applied Physics Letters. 67: 2795. DOI: 10.1557/Proc-398-313 |
0.616 |
|
Low-probability matches (unlikely to be authored by this person) |
2003 |
Chromik RR, Bannuru T, Vinci RP. Internal oxidation and mechanical properties of Pt-IrO 2 thin films Materials Research Society Symposium - Proceedings. 795: 485-490. DOI: 10.1557/Proc-795-U8.13 |
0.299 |
|
2008 |
Wahl KJ, Chromik RR, Lee GY. Quantitative in situ measurement of transfer film thickness by a Newton's rings method Wear. 264: 731-736. DOI: 10.1016/J.Wear.2007.04.009 |
0.296 |
|
2016 |
Mahjoubi H, Buck E, Manimunda P, Farivar R, Chromik R, Murshed M, Cerruti M. Surface phosphonation enhances hydroxyapatite coating adhesion on polyetheretherketone and its osseointegration potential. Acta Biomaterialia. PMID 27717913 DOI: 10.1016/J.Actbio.2016.10.004 |
0.295 |
|
2020 |
Ajaja J, Jomaa W, Bocher P, Chromik R, Brochu M. High cycle fatigue behavior of hard turned 300 M ultra-high strength steel International Journal of Fatigue. 131: 105380. DOI: 10.1016/J.Ijfatigue.2019.105380 |
0.295 |
|
2015 |
Zhang Y, Chromik RR, Descartes S, Regis E, Vo P. Fretting behavior of cold-sprayed Cu and Cu-MoS2 coatings Proceedings of the International Thermal Spray Conference. 1: 420-426. |
0.294 |
|
2014 |
Ghosh P, Chromik RR, Vashegi B, Knight AM. Effect of crystallographic texture on the bulk magnetic properties of non-oriented electrical steels Journal of Magnetism and Magnetic Materials. 365: 14-22. DOI: 10.1016/J.Jmmm.2014.04.051 |
0.294 |
|
2015 |
Gallaugher M, Ghosh P, Knight AM, Chromik RR. The effect of easy axis misorientation on the low induction hysteresis properties of non-oriented electrical steels Journal of Magnetism and Magnetic Materials. 382: 124-133. DOI: 10.1016/J.Jmmm.2015.01.067 |
0.293 |
|
2018 |
Chromik RR, Zhang Y. Nanomechanical testing of third bodies Current Opinion in Solid State and Materials Science. 22: 142-155. DOI: 10.1016/J.Cossms.2018.05.001 |
0.291 |
|
2017 |
Ding Y, Chromik RR. Relationship between indentation plastic zone size and residual stresses in plastically deformed Fe Materials Science and Engineering: A. 696: 1-9. DOI: 10.1016/J.Msea.2017.04.017 |
0.291 |
|
2014 |
Gallaugher M, Brodusch N, Gauvin R, Chromik RR. Magnetic domain structure and crystallographic orientation of electrical steels revealed by a forescatter detector and electron backscatter diffraction. Ultramicroscopy. 142: 40-9. PMID 24769020 DOI: 10.1016/J.Ultramic.2014.03.013 |
0.291 |
|
2015 |
Harrison JM, Goldbaum D, Corkery TC, Barrett CJ, Chromik RR. Nanoindentation studies to separate thermal and optical effects in photo-softening of azo polymers Journal of Materials Chemistry C. 3: 995-1003. DOI: 10.1039/C4Tc02336F |
0.29 |
|
2022 |
Patel P, Roy A, Sharifi N, Stoyanov P, Chromik RR, Moreau C. Tribological Performance of High-Entropy Coatings (HECs): A Review. Materials (Basel, Switzerland). 15. PMID 35629725 DOI: 10.3390/ma15103699 |
0.288 |
|
2017 |
Michael Shockley J, Desrayaud C, Chromik R, Descartes S. Significance of Al 2 O 3 particle morphology in the microstructure evolution of cold-sprayed Al-Al 2 O 3 during unconstrained high-pressure torsion Materials Science and Engineering: A. 684: 510-516. DOI: 10.1016/J.Msea.2016.12.078 |
0.288 |
|
2015 |
Mann P, Miao HY, Gariépy A, Lévesque M, Chromik RR. Residual stress near single shot peening impingements determined by nanoindentation and numerical simulations Journal of Materials Science. 50: 2284-2297. DOI: 10.1007/S10853-014-8792-0 |
0.282 |
|
2004 |
Zeszotarski JC, Chromik RR, Vinci RP, Messmer MC, Michels R, Larsen JW. Imaging and mechanical property measurements of kerogen via nanoindentation Burruss Geochimica Et Cosmochimica Acta. 68: 4113-4119. DOI: 10.1016/J.Gca.2003.11.031 |
0.278 |
|
2016 |
Ghosh A, Arreguin-Zavala J, Aydin H, Goldbaum D, Chromik R, Brochu M. Investigating cube-corner indentation hardness and strength relationship under quasi-static and dynamic testing regimes Materials Science and Engineering: A. 677: 534-539. DOI: 10.1016/J.Msea.2016.08.067 |
0.269 |
|
2017 |
Alatawneh N, Rahman T, Lowther DA, Chromik R. Design and analysis of a toroidal tester for the measurement of core losses under axial compressive stress Journal of Magnetism and Magnetic Materials. 432: 519-526. DOI: 10.1016/J.Jmmm.2017.02.033 |
0.269 |
|
2014 |
Samimi AA, Krause TW, Clapham L, Gallaugher M, Ding Y, Ghosh P, Chromik R, Knight AM. Correlation Between AC Core Loss and Surface Magnetic Barkhausen Noise in Electric Motor Steel Journal of Nondestructive Evaluation. 33: 663-669. DOI: 10.1007/S10921-014-0260-X |
0.264 |
|
2015 |
Gallaugher M, Samimi A, Krause TW, Clapham LC, Chromik RR. Local Magnetic Properties in Non-oriented Electrical Steel and Their Dependence on Magnetic Easy Axis and Misorientation Parameters Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 46: 1262-1276. DOI: 10.1007/S11661-014-2728-9 |
0.256 |
|
2005 |
Chromik RR, Baker CC, Voevodin AA, Wahl KJ. In Situ Optical Tribometry Studies of Nanocomposite Coatings Mrs Proceedings. 890. DOI: 10.1557/PROC-0890-Y05-05-NN07-05 |
0.256 |
|
2012 |
Peykov D, Martin E, Chromik RR, Gauvin R, Trudeau M. Evaluation of strain rate sensitivity by constant load nanoindentation Journal of Materials Science. 47: 7189-7200. DOI: 10.1007/S10853-012-6665-Y |
0.255 |
|
2014 |
Gallaugher M, Brodusch N, Gauvin R, Chromik RR. Magnetic domain structure and crystal orientation revealed by a forescatter detector and electron backscatter diffraction Microscopy and Microanalysis. 20: 1458-1459. DOI: 10.1017/S1431927614009027 |
0.251 |
|
2014 |
Saletes I, Filleter T, Goldbaum D, Chromik RR, Sinclair AN. Reference Specimen for Nondestructive Evaluation: Characterization of the Oxide Layer of a Cold Shot in Inconel 600 Journal of Materials Engineering and Performance. 24: 875-884. DOI: 10.1007/S11665-014-1339-3 |
0.25 |
|
2016 |
Stoyanov P, Shockley JM, Dienwiebel M, Chromik RR. Combining in situ and online approaches to monitor interfacial processes in lubricated sliding contacts Mrs Communications. 6: 301-308. DOI: 10.1557/Mrc.2016.35 |
0.25 |
|
2018 |
Ghorbanian V, Hussain S, Hamidizadeh S, Chromik R, Lowther D. The Role of Temperature-Dependent Material Properties in Optimizing the Design of Permanent Magnet Motors Ieee Transactions On Magnetics. 54: 1-4. DOI: 10.1109/Tmag.2017.2760800 |
0.244 |
|
2013 |
Michael Shockley J, Descartes S, Irissou E, Legoux JG, Chromik RR. Metallic transfer films studied in situ and ex situ: The case of cold-sprayed Al-Al2O3 Tribology and Lubrication Technology. 69: 28-31. |
0.243 |
|
2016 |
Hamidizadeh S, Alatawneh N, Chromik RR, Lowther DA. Comparison of Different Demagnetization Models of Permanent Magnet in Machines for Electric Vehicle Application Ieee Transactions On Magnetics. 52. DOI: 10.1109/Tmag.2015.2513067 |
0.236 |
|
2017 |
Stoyanov P, Chromik RR. Scaling Effects on Materials Tribology: From Macro to Micro Scale. Materials (Basel, Switzerland). 10. PMID 28772909 DOI: 10.3390/Ma10050550 |
0.228 |
|
2018 |
Bianchetti C, Zheng R, Chromik R, Lévesque M, Brochu M. Comparison of small and long fatigue crack growth behavior in AA 7050-T7451 Engineering Fracture Mechanics. 202: 20-32. DOI: 10.1016/J.Engfracmech.2018.09.009 |
0.226 |
|
2013 |
Vapaavuori J, Mahimwalla Z, Chromik RR, Kaivola M, Priimagi A, Barrett CJ. Nanoindentation study of light-induced softening of supramolecular and covalently functionalized azo polymers Journal of Materials Chemistry C. 1: 2806-2810. DOI: 10.1039/C3Tc30246F |
0.221 |
|
2020 |
Alatawneh N, Saleem A, Rahman T, Lowther DA, Chromik R. Modelling and analysis of the effects of cutting of core laminations in electric machines Iet Electric Power Applications. DOI: 10.1049/Iet-Epa.2020.0218 |
0.21 |
|
2015 |
Behera P, Lee L, Chromik RR, Sriraman KR, Brahimi S, Yue S. Hydrogen permeability of Ion vapor deposited (IVD) and electroplated Al coatings by electrochemical permeation cell technique Nace - International Corrosion Conference Series. 2015. |
0.208 |
|
2015 |
Vo P, Goldbaum D, Wong W, Irissou E, Legoux JG, Chromik RR, Yue S. Cold-spray processing of titanium and titanium alloys Titanium Powder Metallurgy: Science, Technology and Applications. 405-423. DOI: 10.1016/B978-0-12-800054-0.00022-8 |
0.207 |
|
2005 |
Chromik RR, Wahl KJ. Friction of microscale contacts on diamond-like carbon nanocomposite coatings Proceedings of the World Tribology Congress Iii - 2005. 829-830. |
0.206 |
|
2017 |
Alatawneh N, Rahman T, Hussain S, Lowther DA, Chromik R. Accuracy of time domain extension formulae of core losses in non-oriented electrical steel laminations under non-sinusoidal excitation Iet Electric Power Applications. 11: 1131-1139. DOI: 10.1049/Iet-Epa.2016.0737 |
0.2 |
|
2015 |
Behera P, Sriraman KR, Lee L, Chromik RR, Yue S, Brahimi S. Corrosion behaviour of Ion Vapor Deposited (IVD) and electroplated al coatings on steel substrates Nace - International Corrosion Conference Series. 2015. |
0.197 |
|
2019 |
Gateman SM, Halimi I, Costa Nascimento AR, Lacasse R, Schulz R, Moreau C, Chromik R, Mauzeroll J. Using macro and micro electrochemical methods to understand the corrosion behavior of stainless steel thermal spray coatings Npj Materials Degradation. 3. DOI: 10.1038/s41529-019-0087-0 |
0.195 |
|
2019 |
Imbriglio SI, Munagala VNV, Schmitt T, Gauvin R, Klemberg-Sapieha JE, Chromik RR. Failure dynamics of spherical and irregular shaped Ti splats deposited on sapphire by cold spray Surface Topography: Metrology and Properties. 7: 045002. DOI: 10.1088/2051-672x/ab3efc |
0.152 |
|
2005 |
Winfrey AL, Reising SE, Bilbro LS, Nemanich RJ, Chromik RR, Wahl KJ. Tribological properties of nanocrystalline diamond films with different nanoscale morphology and bonding characteristics Proceedings of the World Tribology Congress Iii - 2005. 403-404. |
0.148 |
|
2017 |
Behera P, Sriraman KR, Chromik RR, Yue S. Combiningin situtribometry and triboscopy to understand third body behavior of a Cd coating Surface Topography: Metrology and Properties. 5: 014001. DOI: 10.1088/2051-672X/AA5B4E |
0.11 |
|
2006 |
Lin MT, El-Deiry P, Chromik RR, Barbosa N, Brown WL, Delph TJ, Vinci RP. Temperature-dependent microtensile testing of thin film materials for application to microelectromechanical system Microsystem Technologies. 12: 1045-1051. DOI: 10.1007/s00542-006-0129-8 |
0.108 |
|
2000 |
Chromik R, Beck F. A quantitative discrimination between reversible Li+-insertion and irreversible solvent oxidation at a lithium/manganese-spinel electrode Electrochimica Acta. 45: 2175-2185. DOI: 10.1016/S0013-4686(00)00317-0 |
0.025 |
|
Hide low-probability matches. |