Year |
Citation |
Score |
2016 |
Niaki FA, Feng L, Ulutan D, Mears L. A wavelet-based data-driven modelling for tool wear assessment of difficult to machine materials International Journal of Mechatronics and Manufacturing Systems. 9: 97. DOI: 10.1504/Ijmms.2016.076168 |
0.413 |
|
2016 |
Niaki FA, Ulutan D, Mears L. Parameter inference under uncertainty in end-milling γ'-strengthened difficult-to-machine alloy Journal of Manufacturing Science and Engineering, Transactions of the Asme. 138. DOI: 10.1115/1.4033041 |
0.555 |
|
2015 |
Niaki FA, Ulutan D, Mears L. Stochastic tool wear assessment in milling difficult to machine alloys International Journal of Mechatronics and Manufacturing Systems. DOI: 10.1504/Ijmms.2015.073090 |
0.517 |
|
2015 |
Bardis V, Ulutan D, Niaki FA, Mears L. Investigation of the relationship between vibration data and tool wear during end-milling of gamma-prime strengthened alloys Asme 2015 International Manufacturing Science and Engineering Conference, Msec 2015. 1. DOI: 10.1115/MSEC20159470 |
0.473 |
|
2015 |
Ulutan D, Pleta A, Mears L. Electrically-assisted machining of titanium alloy ti-6al-4V and nickel-based alloy in-738: An investigation Asme 2015 International Manufacturing Science and Engineering Conference, Msec 2015. 1. DOI: 10.1115/MSEC20159465 |
0.444 |
|
2015 |
Niaki FA, Ulutan D, Mears L. Parameter estimation using Markov Chain Monte Carlo method in mechanistic modeling of tool wear during milling Asme 2015 International Manufacturing Science and Engineering Conference, Msec 2015. 2. DOI: 10.1115/MSEC20159357 |
0.447 |
|
2015 |
Skovron JD, Rohan Prasad R, Ulutan D, Mears L, Detwiler D, Paolini D, Baeumler B, Claus L. Effect of Thermal Assistance on the Joint Quality of Al6063-T5A During Flow Drill Screwdriving Journal of Manufacturing Science and Engineering, Transactions of the Asme. 137. DOI: 10.1115/1.4031242 |
0.347 |
|
2015 |
Niaki FA, Ulutan D, Mears L. Wavelet based sensor fusion for tool condition monitoring of hard to machine materials Ieee International Conference On Multisensor Fusion and Integration For Intelligent Systems. 2015: 271-276. DOI: 10.1109/MFI.2015.7295820 |
0.355 |
|
2015 |
Pleta A, Ulutan D, Mears L. An Investigation of Alternative Path Planning Strategies for Machining of Nickel-Based Superalloys Procedia Manufacturing. 1: 556-566. DOI: 10.1016/J.Promfg.2015.09.032 |
0.542 |
|
2015 |
Ulutan D, Pleta A, Henderson A, Mears L. Comparison and Cost Optimization of Solid Tool Life in End Milling Nickel-Based Superalloy Procedia Manufacturing. 1: 522-533. DOI: 10.1016/J.Promfg.2015.09.024 |
0.517 |
|
2015 |
Niaki FA, Ulutan D, Mears L. In-Process Tool Flank Wear Estimation in Machining Gamma-Prime Strengthened Alloys Using Kalman Filter Procedia Manufacturing. 1: 696-707. DOI: 10.1016/J.Promfg.2015.09.018 |
0.554 |
|
2014 |
Skovron J, Mears L, Ulutan D, Detwiler D, Paolini D, Baeumler B, Claus L. Characterization of flow drill screwdriving process parameters on joint quality Sae International Journal of Materials and Manufacturing. 8: 35-44. DOI: 10.4271/2014-01-2241 |
0.36 |
|
2014 |
Özel T, Ulutan D. Effects of machining parameters and tool geometry on serrated chip formation, specific forces and energies in orthogonal cutting of nickel-based super alloy Inconel 100 Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 228: 673-686. DOI: 10.1177/0954405413510291 |
0.469 |
|
2014 |
Pleta A, Ulutan D, Mears L. Investigation of trochoidal milling in nickel-based superalloy inconel 738 and comparison with end milling Asme 2014 International Manufacturing Science and Engineering Conference, Msec 2014 Collocated With the Jsme 2014 International Conference On Materials and Processing and the 42nd North American Manufacturing Research Conference. 2. DOI: 10.1115/MSEC2014-4151 |
0.448 |
|
2014 |
Ulutan D, Pleta A, Mears L. Multi-objective particle swarm optimization of machining parameters for end milling titanium alloy TI-6AL-4V Asme 2014 International Manufacturing Science and Engineering Conference, Msec 2014 Collocated With the Jsme 2014 International Conference On Materials and Processing and the 42nd North American Manufacturing Research Conference. 1. DOI: 10.1115/MSEC2014-4145 |
0.38 |
|
2014 |
Stanley C, Ulutan D, Mears L. Prediction of tool wear based on cutting forces when end milling titanium alloy TI-6AL-4V Asme 2014 International Manufacturing Science and Engineering Conference, Msec 2014 Collocated With the Jsme 2014 International Conference On Materials and Processing and the 42nd North American Manufacturing Research Conference. 1. DOI: 10.1115/MSEC2014-4140 |
0.506 |
|
2014 |
Arrazola PJ, Kortabarria A, Madariaga A, Esnaola JA, Fernandez E, Cappellini C, Ulutan D, Özel T. On the machining induced residual stresses in IN718 nickel-based alloy: Experiments and predictions with finite element simulation Simulation Modelling Practice and Theory. 41: 87-103. DOI: 10.1016/J.Simpat.2013.11.009 |
0.728 |
|
2014 |
Ulutan D, Arisoy YM, Özel T, Mears L. Empirical modeling of residual stress profile in machining nickelbased superalloys using the sinusoidal decay function Procedia Cirp. 13: 365-370. DOI: 10.1016/J.Procir.2014.04.062 |
0.674 |
|
2013 |
Ulutan D, Özel T. Multiobjective optimization of experimental and simulated residual stresses in turning of Nickel-Alloy IN100 Materials and Manufacturing Processes. 28: 835-841. DOI: 10.1080/10426914.2012.718474 |
0.658 |
|
2013 |
Ulutan D, Özel T. Determination of tool friction in presence of flank wear and stress distribution based validation using finite element simulations in machining of titanium and nickel based alloys Journal of Materials Processing Technology. 213: 2217-2237. DOI: 10.1016/J.Jmatprotec.2013.05.019 |
0.737 |
|
2013 |
Ulutan D, Özel T. Determination of constitutive material model parameters in FE-based machining simulations of Ti-6Al-4V and in-100 alloys: An inverse methodology Transactions of the North American Manufacturing Research Institution of Sme. 41: 368-373. |
0.458 |
|
2012 |
Ulutan D, Özel T. Methodology to determine friction in orthogonal cutting with application to machining titanium and nickel based alloys Asme 2012 International Manufacturing Science and Engineering Conference Collocated With the 40th North American Manufacturing Research Conference and in Participation With the Int. Conf., Msec 2012. 327-334. DOI: 10.1115/MSEC2012-7275 |
0.573 |
|
2012 |
Özel T, Ulutan D. Prediction of machining induced residual stresses in turning of titanium and nickel based alloys with experiments and finite element simulations Cirp Annals - Manufacturing Technology. 61: 547-550. DOI: 10.1016/J.Cirp.2012.03.100 |
0.747 |
|
2011 |
Ulutan D, Sima M, Özel T. Prediction of machining induced surface integrity using elastic-viscoplastic simulations and temperature-dependent flow softening material models in titanium and nickel-based alloys Advanced Materials Research. 223: 401-410. DOI: 10.4028/Www.Scientific.Net/Amr.223.401 |
0.73 |
|
2011 |
Ulutan D, Ozel T. Machining induced surface integrity in titanium and nickel alloys: A review International Journal of Machine Tools and Manufacture. 51: 250-280. DOI: 10.1016/J.Ijmachtools.2010.11.003 |
0.692 |
|
2011 |
Özel T, Thepsonthi T, Ulutan D, Kaftanolu B. Experiments and finite element simulations on micro-milling of Ti-6Al-4V alloy with uncoated and cBN coated micro-tools Cirp Annals - Manufacturing Technology. 60: 85-88. DOI: 10.1016/J.Cirp.2011.03.087 |
0.662 |
|
2011 |
Sima M, Ulutan D, Özel T. Effects of tool micro-geometry and coatings in turning of Ti-6Al-4V titanium alloy Transactions of the North American Manufacturing Research Institution of Sme. 39: 395-402. |
0.392 |
|
2009 |
Ulutan D, Lazoglu I, Dinc C. Three-dimensional temperature predictions in machining processes using finite difference method Journal of Materials Processing Technology. 209: 1111-1121. DOI: 10.1016/J.Jmatprotec.2008.03.020 |
0.576 |
|
2008 |
Lazoglu I, Ulutan D, Alaca BE, Engin S. Erratum to “An enhanced analytical model for residual stress prediction in machining” [CIRP Ann. 57 (1) (2008) 81–84] Cirp Annals-Manufacturing Technology. 57: 770. DOI: 10.1016/J.Cirp.2008.06.001 |
0.482 |
|
2008 |
Lazoglu I, Ulutan D, Alaca BE, Engin S, Kaftanoglu B. An enhanced analytical model for residual stress prediction in machining Cirp Annals - Manufacturing Technology. 57: 81-84. DOI: 10.1016/J.Cirp.2008.03.060 |
0.582 |
|
2007 |
Ulutan D, Erdem Alaca B, Lazoglu I. Analytical modelling of residual stresses in machining Journal of Materials Processing Technology. 183: 77-87. DOI: 10.1016/J.Jmatprotec.2006.09.032 |
0.579 |
|
Show low-probability matches. |