Year |
Citation |
Score |
2024 |
Criales LE, Arısoy YM, Lane B, Moylan S, Donmez A, Özel T. Predictive modeling and optimization of multi-track processing for laser powder bed fusion of nickel alloy 625. Additive Manufacturing. 13. PMID 38487077 DOI: 10.1016/j.addma.2016.11.004 |
0.327 |
|
2020 |
Patel K, Liu G, Shah SR, Özel T. Effect of Micro-Textured Tool Parameters on Forces, Stresses, Wear Rate, and Variable Friction in Titanium Alloy Machining Journal of Manufacturing Science and Engineering-Transactions of the Asme. 142. DOI: 10.1115/1.4045554 |
0.545 |
|
2020 |
Özel T, Altay A, Kaftanoğlu B, Leach R, Senin N, Donmez A. Focus Variation Measurement and Prediction of Surface Texture Parameters Using Machine Learning in Laser Powder Bed Fusion Journal of Manufacturing Science and Engineering-Transactions of the Asme. 142. DOI: 10.1115/1.4045415 |
0.419 |
|
2020 |
Yang L, Patel KV, Jarosz K, Özel T. Surface integrity induced in machining additively fabricated nickel alloy Inconel 625 Procedia Cirp. 87: 351-354. DOI: 10.1016/J.Procir.2020.02.104 |
0.509 |
|
2020 |
Abeni A, Loda D, Özel T, Attanasio A. Analytical force modelling for micro milling additively fabricated Inconel 625 Production Engineering. 1-15. DOI: 10.1007/S11740-020-00980-X |
0.52 |
|
2020 |
Liu G, Özel T, Li J, Wang D, Sun S. Optimization and fabrication of curvilinear micro-grooved cutting tools for sustainable machining based on finite element modelling of the cutting process The International Journal of Advanced Manufacturing Technology. 110: 1327-1338. DOI: 10.1007/S00170-020-05906-6 |
0.542 |
|
2019 |
Fei J, Liu G, Patel K, Özel T. Cutting force investigation in face milling of additively fabricated nickel alloy 625 via powder bed fusion International Journal of Mechatronics and Manufacturing Systems. 12: 196. DOI: 10.1504/Ijmms.2019.10025072 |
0.44 |
|
2019 |
Patel K, Kaftanoğlu B, Özel T. Micro textured cutting tool effects on cutting forces, volumetric wear and adhesion in dry turning of titanium alloy International Journal of Mechatronics and Manufacturing Systems. 12: 180. DOI: 10.1504/Ijmms.2019.10025070 |
0.521 |
|
2019 |
Liu G, Shah S, Özel T. Material Ductile Failure Based Finite Element Simulations of Chip Serration in Orthogonal Cutting of Titanium Alloy Ti-6Al-4V Journal of Manufacturing Science and Engineering-Transactions of the Asme. 141: 1-24. DOI: 10.1115/1.4042788 |
0.393 |
|
2019 |
Shah SR, Liu G, Özel T. Finite element simulations of chip serration in titanium alloy cutting by considering material failure Procedia Cirp. 82: 320-325. DOI: 10.1016/J.Procir.2019.04.153 |
0.452 |
|
2019 |
Patel KV, Shah SR, Özel T. Orthogonal cutting of alloy steel 4340 with micro-grooved cutting tools Procedia Cirp. 82: 178-183. DOI: 10.1016/J.Procir.2019.03.276 |
0.533 |
|
2019 |
Arısoy YM, Criales LE, Özel T. Modeling and simulation of thermal field and solidification in laser powder bed fusion of nickel alloy IN625 Optics and Laser Technology. 109: 278-292. DOI: 10.1016/J.Optlastec.2018.08.016 |
0.397 |
|
2019 |
Liu G, Huang C, Su R, Özel T, Liu Y, Xu L. 3D FEM simulation of the turning process of stainless steel 17-4PH with differently texturized cutting tools International Journal of Mechanical Sciences. 155: 417-429. DOI: 10.1016/J.Ijmecsci.2019.03.016 |
0.58 |
|
2019 |
Patel K, Fei J, Liu G, Özel T. Milling investigations and yield strength calculations for nickel alloy Inconel 625 manufactured with laser powder bed fusion process Production Engineering. 13: 693-702. DOI: 10.1007/S11740-019-00922-2 |
0.523 |
|
2019 |
Attanasio A, Abeni A, Özel T, Ceretti E. Finite element simulation of high speed micro milling in the presence of tool run-out with experimental validations The International Journal of Advanced Manufacturing Technology. 100: 25-35. DOI: 10.1007/S00170-018-2678-2 |
0.557 |
|
2018 |
Özel T, Shaurya A, Altay A, Yang L. Process monitoring of meltpool and spatter for temporal-spatial modeling of laser powder bed fusion process Procedia Cirp. 74: 102-106. DOI: 10.1016/J.Procir.2018.08.049 |
0.312 |
|
2018 |
Özel T, Altay A, Donmez A, Leach R. Surface topography investigations on nickel alloy 625 fabricated via laser powder bed fusion The International Journal of Advanced Manufacturing Technology. 94: 4451-4458. DOI: 10.1007/S00170-017-1187-Z |
0.407 |
|
2017 |
Olleak A, Özel T. 3D Finite Element Modeling Based Investigations of Micro-textured Tool Designs in Machining Titanium Alloy Ti-6Al-4V Procedia Manufacturing. 10: 536-545. DOI: 10.1016/J.Promfg.2017.07.042 |
0.604 |
|
2017 |
Criales LE, Arısoy YM, Lane B, Moylan S, Donmez A, Özel T. Laser powder bed fusion of nickel alloy 625: Experimental investigations of effects of process parameters on melt pool size and shape with spatter analysis International Journal of Machine Tools & Manufacture. 121: 22-36. DOI: 10.1016/J.Ijmachtools.2017.03.004 |
0.4 |
|
2017 |
Criales LE, Arısoy YM, Lane B, Moylan S, Donmez A, Özel T. Predictive modeling and optimization of multi-track processing for laser powder bed fusion of nickel alloy 625 Additive Manufacturing. 13: 14-36. DOI: 10.1016/J.Addma.2016.11.004 |
0.435 |
|
2017 |
Özel T, Olleak A, Thepsonthi T. Micro milling of titanium alloy Ti-6Al-4V: 3-D finite element modeling for prediction of chip flow and burr formation Production Engineering. 11: 435-444. DOI: 10.1007/S11740-017-0761-4 |
0.498 |
|
2017 |
Arısoy YM, Criales LE, Özel T, Lane B, Moylan S, Donmez A. Influence of scan strategy and process parameters on microstructure and its optimization in additively manufactured nickel alloy 625 via laser powder bed fusion The International Journal of Advanced Manufacturing Technology. 90: 1393-1417. DOI: 10.1007/S00170-016-9429-Z |
0.402 |
|
2016 |
Özel T, Arısoy YM, Guo C. Identification of Microstructural Model Parameters for 3D Finite Element Simulation of Machining Inconel 100 Alloy Procedia Cirp. 46: 549-554. DOI: 10.1016/J.Procir.2016.04.021 |
0.523 |
|
2016 |
Özel T, Arısoy YM, Criales LE. Computational simulation of thermal and spattering phenomena and microstructure in selective laser melting of inconel 625 Physics Procedia. 83: 1435-1443. DOI: 10.1016/J.Phpro.2016.08.149 |
0.381 |
|
2016 |
Arisoy YM, Guo C, Kaftanoʇlu B, Özel T. Investigations on microstructural changes in machining of Inconel 100 alloy using face turning experiments and 3D finite element simulations International Journal of Mechanical Sciences. 107: 80-92. DOI: 10.1016/J.Ijmecsci.2016.01.009 |
0.533 |
|
2016 |
Thepsonthi T, Özel T. Simulation of serrated chip formation in micro-milling of titanium alloy Ti-6Al-4V using 2D elasto-viscoplastic finite element modeling Production Engineering. 10: 575-586. DOI: 10.1007/S11740-016-0701-8 |
0.494 |
|
2016 |
Criales LE, Arısoy YM, Özel T. Sensitivity analysis of material and process parameters in finite element modeling of selective laser melting of Inconel 625 The International Journal of Advanced Manufacturing Technology. 86: 2653-2666. DOI: 10.1007/S00170-015-8329-Y |
0.397 |
|
2015 |
Criales LE, Orozco PF, Medrano A, Rodŕguez CA, Özel T. Effect of Fluence and Pulse Overlapping on Fabrication of Microchannels in PMMA/PDMS Via UV Laser Micromachining: Modeling and Experimentation Materials and Manufacturing Processes. 30: 890-901. DOI: 10.1080/10426914.2015.1004690 |
0.344 |
|
2015 |
Arisoy YM, Özel T. Machine Learning Based Predictive Modeling of Machining Induced Microhardness and Grain Size in Ti–6Al–4V Alloy Materials and Manufacturing Processes. 30: 425-433. DOI: 10.1080/10426914.2014.961476 |
0.541 |
|
2015 |
Thepsonthi T, Özel T. 3-D finite element process simulation of micro-end milling Ti-6Al-4V titanium alloy: Experimental validations on chip flow and tool wear Journal of Materials Processing Technology. 221: 128-145. DOI: 10.1016/J.Jmatprotec.2015.02.019 |
0.512 |
|
2015 |
Arısoy YM, Özel T. Prediction of machining induced microstructure in Ti–6Al–4V alloy using 3-D FE-based simulations: Effects of tool micro-geometry, coating and cutting conditions Journal of Materials Processing Technology. 220: 1-26. DOI: 10.1016/J.Jmatprotec.2014.11.002 |
0.559 |
|
2014 |
Arrazola PJ, Kortabarria A, Madariaga A, Esnaola JA, Fernandez E, Cappellini C, Ulutan D, Özel T. On the machining induced residual stresses in IN718 nickel-based alloy: Experiments and predictions with finite element simulation Simulation Modelling Practice and Theory. 41: 87-103. DOI: 10.1016/J.Simpat.2013.11.009 |
0.78 |
|
2014 |
Ulutan D, Arisoy YM, Özel T, Mears L. Empirical modeling of residual stress profile in machining nickelbased superalloys using the sinusoidal decay function Procedia Cirp. 13: 365-370. DOI: 10.1016/J.Procir.2014.04.062 |
0.747 |
|
2014 |
Özel T, Arisoy YM. Experimental and Numerical Investigations on Machining Induced Surface Integrity in Inconel-100 Nickel-Base Alloy Procedia Cirp. 13: 302-307. DOI: 10.1016/J.Procir.2014.04.051 |
0.572 |
|
2014 |
Bouzakis KD, Bouzakis E, Kombogiannis S, Makrimallakis S, Skordaris G, Michailidis N, Charalampous P, Paraskevopoulou R, M'Saoubi R, Aurich JC, Barthelmä F, Biermann D, Denkena B, Dimitrov D, Engin S, ... ... Ozel T, et al. Effect of cutting edge preparation of coated tools on their performance in milling various materials Cirp Journal of Manufacturing Science and Technology. 7: 264-273. DOI: 10.1016/J.Cirpj.2014.05.003 |
0.461 |
|
2014 |
Thepsonthi T, Özel T. An integrated toolpath and process parameter optimization for high-performance micro-milling process of Ti–6Al–4V titanium alloy The International Journal of Advanced Manufacturing Technology. 75: 57-75. DOI: 10.1007/S00170-014-6102-2 |
0.556 |
|
2013 |
Ulutan D, Özel T. Multiobjective optimization of experimental and simulated residual stresses in turning of Nickel-Alloy IN100 Materials and Manufacturing Processes. 28: 835-841. DOI: 10.1080/10426914.2012.718474 |
0.753 |
|
2013 |
Teixidor D, Ferrer I, Ciurana J, Özel T. Optimization of process parameters for pulsed laser milling of micro-channels on AISI H13 tool steel Robotics and Computer-Integrated Manufacturing. 29: 209-218. DOI: 10.1016/J.Rcim.2012.05.005 |
0.405 |
|
2013 |
Ulutan D, Özel T. Determination of tool friction in presence of flank wear and stress distribution based validation using finite element simulations in machining of titanium and nickel based alloys Journal of Materials Processing Technology. 213: 2217-2237. DOI: 10.1016/J.Jmatprotec.2013.05.019 |
0.81 |
|
2013 |
Thepsonthi T, Özel T. Experimental and finite element simulation based investigations on micro-milling Ti-6Al-4V titanium alloy: Effects of cBN coating on tool wear Journal of Materials Processing Technology. 213: 532-542. DOI: 10.1016/J.Jmatprotec.2012.11.003 |
0.555 |
|
2013 |
Arrazola PJ, Özel T, Umbrello D, Davies M, Jawahir IS. Recent advances in modelling of metal machining processes Cirp Annals - Manufacturing Technology. 62: 695-718. DOI: 10.1016/J.Cirp.2013.05.006 |
0.514 |
|
2012 |
Özel T, Ulutan D. Prediction of machining induced residual stresses in turning of titanium and nickel based alloys with experiments and finite element simulations Cirp Annals - Manufacturing Technology. 61: 547-550. DOI: 10.1016/J.Cirp.2012.03.100 |
0.797 |
|
2012 |
Thepsonthi T, Özel T. Multi-objective process optimization for micro-end milling of Ti-6Al-4V titanium alloy The International Journal of Advanced Manufacturing Technology. 63: 903-914. DOI: 10.1007/S00170-012-3980-Z |
0.453 |
|
2011 |
Ulutan D, Sima M, Özel T. Prediction of machining induced surface integrity using elastic-viscoplastic simulations and temperature-dependent flow softening material models in titanium and nickel-based alloys Advanced Materials Research. 223: 401-410. DOI: 10.4028/Www.Scientific.Net/Amr.223.401 |
0.798 |
|
2011 |
Ozel T, Llanos I, Soriano J, Arrazola PJ. 3d finite element modelling of chip formation process for machining inconel 718: Comparison of FE software predictions Machining Science and Technology. 15: 21-46. DOI: 10.1080/10910344.2011.557950 |
0.519 |
|
2011 |
Vázquez E, Ciurana J, Rodríguez CA, Thepsonthi T, Özel T. Swarm Intelligent Selection and Optimization of Machining System Parameters for Microchannel Fabrication in Medical Devices Materials and Manufacturing Processes. 26: 403-414. DOI: 10.1080/10426914.2010.520792 |
0.42 |
|
2011 |
Ulutan D, Ozel T. Machining induced surface integrity in titanium and nickel alloys: A review International Journal of Machine Tools and Manufacture. 51: 250-280. DOI: 10.1016/J.Ijmachtools.2010.11.003 |
0.781 |
|
2011 |
Özel T, Thepsonthi T, Ulutan D, Kaftanolu B. Experiments and finite element simulations on micro-milling of Ti-6Al-4V alloy with uncoated and cBN coated micro-tools Cirp Annals - Manufacturing Technology. 60: 85-88. DOI: 10.1016/J.Cirp.2011.03.087 |
0.772 |
|
2011 |
Alberti M, Ciurana J, Rodríguez CA, Özel T. Design of a decision support system for machine tool selection based on machine characteristics and performance tests Journal of Intelligent Manufacturing. 22: 263-277. DOI: 10.1007/S10845-009-0286-6 |
0.467 |
|
2010 |
Arrazola PJ, Özel T. Investigations on the effects of friction modeling in finite element simulation of machining International Journal of Mechanical Sciences. 52: 31-42. DOI: 10.1016/J.Ijmecsci.2009.10.001 |
0.579 |
|
2010 |
Sima M, Özel T. Modified material constitutive models for serrated chip formation simulations and experimental validation in machining of titanium alloy Ti–6Al–4V International Journal of Machine Tools & Manufacture. 50: 943-960. DOI: 10.1016/J.Ijmachtools.2010.08.004 |
0.564 |
|
2010 |
Özel T, Sima M, Srivastava AK, Kaftanoglu B. Investigations on the effects of multi-layered coated inserts in machining Ti–6Al–4V alloy with experiments and finite element simulations Cirp Annals-Manufacturing Technology. 59: 77-82. DOI: 10.1016/J.Cirp.2010.03.055 |
0.487 |
|
2009 |
Lee WH, Ozel T. An experimental method for laser micro-machining of spherical and elliptical 3-D objects International Journal of Nanomanufacturing. 3: 264. DOI: 10.1504/Ijnm.2009.027428 |
0.353 |
|
2009 |
Ozel T, Correia AE, Davim JP. Neural network process modelling for turning of steel parts using conventional and wiper inserts International Journal of Materials & Product Technology. 35: 246. DOI: 10.1504/Ijmpt.2009.025230 |
0.465 |
|
2009 |
Pellicer N, Ciurana J, Ozel T. Influence of process parameters and electrode geometry on feature micro-accuracy in electro discharge machining of tool steel Materials and Manufacturing Processes. 24: 1282-1289. DOI: 10.1080/10426910903130065 |
0.447 |
|
2009 |
Özel T, Liu X. Investigations on Mechanics-Based Process Planning of Micro-End Milling in Machining Mold Cavities Materials and Manufacturing Processes. 24: 1274-1281. DOI: 10.1080/10426910903130008 |
0.53 |
|
2009 |
Ciurana J, Arias G, Ozel T. Neural network modeling and particle swarm optimization (PSO) of process parameters in pulsed laser micromachining of hardened AISI H13 steel Materials and Manufacturing Processes. 24: 358-368. DOI: 10.1080/10426910802679568 |
0.43 |
|
2009 |
Özel T. Computational modelling of 3D turning: Influence of edge micro-geometry on forces, stresses, friction and tool wear in PcBN tooling Journal of Materials Processing Technology. 209: 5167-5177. DOI: 10.1016/J.Jmatprotec.2009.03.002 |
0.554 |
|
2008 |
Dhanorker A, Ozel T. Meso/micro scale milling for micro-manufacturing International Journal of Mechatronics and Manufacturing Systems. 1: 23-42. DOI: 10.1504/Ijmms.2008.018273 |
0.491 |
|
2008 |
Karpat Y, Özel T. Process simulations for 3D turning using uniform and variable microgeometry PCBN tools International Journal of Machining and Machinability of Materials. 4: 26-38. DOI: 10.1504/Ijmmm.2008.020908 |
0.741 |
|
2008 |
Arrazola PJ, Ozel T. Numerical modelling of 3D hard turning using arbitrary Lagrangian Eulerian finite element method International Journal of Machining and Machinability of Materials. 4: 14-25. DOI: 10.1504/Ijmmm.2008.020907 |
0.562 |
|
2008 |
Karpat Y, Özel T. Analytical and thermal modeling of high-speed machining with chamfered tools Journal of Manufacturing Science and Engineering, Transactions of the Asme. 130: 0110011-01100115. DOI: 10.1115/1.2783282 |
0.772 |
|
2008 |
Özel T, Karpat Y, Srivastava A. Hard turning with variable micro-geometry PcBN tools Cirp Annals - Manufacturing Technology. 57: 73-76. DOI: 10.1016/J.Cirp.2008.03.063 |
0.746 |
|
2007 |
Ozel T. Numerical modelling of meso-scale finish machining with finite edge radius tools International Journal of Machining and Machinability of Materials. 2: 451-468. DOI: 10.1504/Ijmmm.2007.015476 |
0.584 |
|
2007 |
Özel T, Karpat Y. Identification of constitutive material model parameters for high-strain rate metal cutting conditions using evolutionary computational algorithms Materials and Manufacturing Processes. 22: 659-667. DOI: 10.1080/10426910701323631 |
0.718 |
|
2007 |
Özel T, Karpat Y, Figueira L, Davim JP. Modelling of surface finish and tool flank wear in turning of AISI D2 steel with ceramic wiper inserts Journal of Materials Processing Technology. 189: 192-198. DOI: 10.1016/J.Jmatprotec.2007.01.021 |
0.752 |
|
2007 |
Özel T, Zeren E. Finite element modeling the influence of edge roundness on the stress and temperature fields induced by high-speed machining. The International Journal of Advanced Manufacturing Technology. 35: 255-267. DOI: 10.1007/S00170-006-0720-2 |
0.589 |
|
2007 |
Karpat Y, Özel T. Multi-objective optimization for turning processes using neural network modeling and dynamic-neighborhood particle swarm optimization International Journal of Advanced Manufacturing Technology. 35: 234-247. DOI: 10.1007/S00170-006-0719-8 |
0.717 |
|
2006 |
Karpat Y, Özel T. Predictive analytical and thermal modeling of orthogonal cutting process-part II: Effect of tool flank wear on tool forces, stresses, and temperature distributions Journal of Manufacturing Science and Engineering, Transactions of the Asme. 128: 445-453. DOI: 10.1115/1.2162591 |
0.773 |
|
2006 |
Karpat Y, Özel T. Predictive analytical and thermal modeling of orthogonal cutting process-part I: Predictions of tool forces, stresses, and temperature distributions Journal of Manufacturing Science and Engineering, Transactions of the Asme. 128: 435-444. DOI: 10.1115/1.2162590 |
0.749 |
|
2006 |
Özel T, Zeren E. A Methodology to Determine Work Material Flow Stress and Tool-Chip Interfacial Friction Properties by Using Analysis of Machining Journal of Manufacturing Science and Engineering-Transactions of the Asme. 128: 119-129. DOI: 10.1115/1.2118767 |
0.543 |
|
2006 |
Özel T. The influence of friction models on finite element simulations of machining International Journal of Machine Tools & Manufacture. 46: 518-530. DOI: 10.1016/J.Ijmachtools.2005.07.001 |
0.566 |
|
2006 |
Özel T. Precision tracking control of a horizontal arm coordinate measuring machine in the presence of dynamic flexibilities The International Journal of Advanced Manufacturing Technology. 27: 960-968. DOI: 10.1007/S00170-004-2292-3 |
0.312 |
|
2005 |
Özel T, Karpat Y. Predictive modeling of surface roughness and tool wear in hard turning using regression and neural networks International Journal of Machine Tools and Manufacture. 45: 467-479. DOI: 10.1016/J.Ijmachtools.2004.09.007 |
0.755 |
|
2005 |
Özel T, Hsu T, Zeren E. Effects of cutting edge geometry, workpiece hardness, feed rate and cutting speed on surface roughness and forces in finish turning of hardened AISI H13 steel The International Journal of Advanced Manufacturing Technology. 25: 262-269. DOI: 10.1007/S00170-003-1878-5 |
0.495 |
|
2004 |
Özel T, Zeren E. Determination of work material flow stress and friction for FEA of machining using orthogonal cutting tests Journal of Materials Processing Technology. 153: 1019-1025. DOI: 10.1016/J.Jmatprotec.2004.04.162 |
0.557 |
|
2003 |
Özel T. Modeling of hard part machining: effect of insert edge preparation in CBN cutting tools Journal of Materials Processing Technology. 141: 284-293. DOI: 10.1016/S0924-0136(03)00278-4 |
0.594 |
|
2002 |
Özel T, Nadgir A. Prediction of flank wear by using back propagation neural network modeling when cutting hardened H-13 steel with chamfered and honed CBN tools International Journal of Machine Tools & Manufacture. 42: 287-297. DOI: 10.1016/S0890-6955(01)00103-1 |
0.516 |
|
2000 |
Fallböhmer P, Rodrı́guez CA, Özel T, Altan T. High-speed machining of cast iron and alloy steels for die and mold manufacturing Journal of Materials Processing Technology. 98: 104-115. DOI: 10.1016/S0924-0136(99)00311-8 |
0.553 |
|
Show low-probability matches. |