| Year |
Citation |
Score |
| 2018 |
Nguyen-Tri P, Tuduri L, Gauvin C, Triki E, Vu-Khanh T. Swelling behavior of polymeric membranes to metalworking fluids Journal of Applied Polymer Science. 135: 45717. DOI: 10.1002/App.45717 |
0.653 |
|
| 2015 |
Triki E, Nguyen-Tri P, Gauvin C, Azaiez M, Vu-Khanh T. Combined puncture/cutting of elastomer membranes by pointed blades: Characterization of mechanisms Journal of Applied Polymer Science. 132. DOI: 10.1002/App.42150 |
0.642 |
|
| 2014 |
Saboktakin A, Vu-Khanh T. Performance assessment of textile composite using NDE and mechanical testing techniques International Journal of Structural Integrity. 5: 17-29. DOI: 10.1108/Ijsi-04-2013-0007 |
0.32 |
|
| 2014 |
Saboktakin A, Vu-Khanh T, Bonnefon Y. Non-destructive evaluation of stacking sequence in textile composite: Different techniques and experimental verification Assembly Automation. 34: 264-274. DOI: 10.1108/Aa-05-2013-047 |
0.324 |
|
| 2014 |
Nguyen-Tri P, El Aidani R, Leborgne E, Pham T, Vu-Khanh T. Chemical ageingaging of a polyester nonwoven membrane used in aerosol and drainage filter Polymer Degradation and Stability. 101: 71-80. DOI: 10.1016/J.Polymdegradstab.2014.01.001 |
0.746 |
|
| 2014 |
Saboktakin A, Vu-Khanh T. A comparative quality assessment of textile composite using NDT and geometrical inspection techniques Polymer Composites. 35: 1818-1825. DOI: 10.1002/Pc.22836 |
0.33 |
|
| 2013 |
Nguyen CT, Dolez PI, Vu-Khanh T, Gauvin C, Lara J. Effect of protective glove use conditions on their resistance to needle puncture Plastics, Rubber and Composites. 42: 187-193. DOI: 10.1179/1743289811Y.0000000049 |
0.353 |
|
| 2013 |
El Aidani R, Nguyen-Tri P, Malajati Y, Lara J, Vu-Khanh T. Photochemical aging of an e-PTFE/NOMEX® membrane used in firefighter protective clothing Polymer Degradation and Stability. 98: 1300-1310. DOI: 10.1016/J.Polymdegradstab.2013.04.002 |
0.749 |
|
| 2013 |
Arrieta C, Dong Y, Lan A, Vu-Khanh T. Outdoor weathering of polyamide and polyester ropes used in fall arrest equipment Journal of Applied Polymer Science. 130: 3058-3065. DOI: 10.1002/App.39524 |
0.734 |
|
| 2013 |
Nguyen-Tri P, Triki E, Gauvin C, Tuduri L, Azaiez M, Lara J, Vu-Khanh T. The swelling characteristics of protective glove materials to industrial contaminations Engineering Against Failure - Proceedings of the 3rd International Conference of Engineering Against Failure, Iceaf 2013. 568-578. |
0.621 |
|
| 2012 |
Triki E, Vu-Khanh T, Nguyen-Tri P, Boukehili H. Mechanics and mechanisms of tear resistance of woven fabrics Theoretical and Applied Fracture Mechanics. 61: 33-39. DOI: 10.1016/J.Tafmec.2012.08.004 |
0.646 |
|
| 2012 |
Triki E, Nguyen-Tri P, Boukehili H, Vu-Khanh T. Investigation of tearing mechanisms of woven textile Polymer Composites. 33: 1578-1585. DOI: 10.1002/Pc.22294 |
0.649 |
|
| 2012 |
Triki E, Arrieta C, Boukehili H, Vu-Khanh T. Tear behavior of polyester-based coated textiles after thermo-oxidative aging Polymer Composites. 33: 1007-1017. DOI: 10.1002/Pc.22227 |
0.761 |
|
| 2011 |
Arrieta C, David E, Dolez P, Vu-Khanh T. Hydrolytic and photochemical aging studies of a Kevlar®-PBI blend Polymer Degradation and Stability. 96: 1411-1419. DOI: 10.1016/J.Polymdegradstab.2011.05.015 |
0.737 |
|
| 2011 |
Triki E, Dolez P, Vu-Khanh T. Tear resistance of woven textiles - Criterion and mechanisms Composites Part B: Engineering. 42: 1851-1859. DOI: 10.1016/J.Compositesb.2011.06.015 |
0.634 |
|
| 2011 |
Arrieta C, David E, Dolez P, Vu-Khanh T. X-ray diffraction, Raman, and differential thermal analyses of the thermal aging of a Kevlar®-PBI blend fabric Polymer Composites. 32: 362-367. DOI: 10.1002/Pc.21041 |
0.735 |
|
| 2011 |
El Aidani R, Dolez PI, Vu-Khanh T. Effect of thermal aging on the mechanical and barrier properties of an e-PTFE/Nomex® moisture membrane used in firefighters' protective suits Journal of Applied Polymer Science. 121: 3101-3110. DOI: 10.1002/App.33991 |
0.751 |
|
| 2010 |
Dolez PI, Gauvin C, Lara J, Vu-Khanh T. Effect of protective glove exposure to industrial contaminants on their resistance to mechanical risks. International Journal of Occupational Safety and Ergonomics : Jose. 16: 169-83. PMID 20540838 DOI: 10.1080/10803548.2010.11076837 |
0.323 |
|
| 2010 |
Nguyen CT, Dolez PI, Vu-Khanh T, Gauvin C, Lara J. Resistance of protective gloves materials to puncture by medical needles Journal of Astm International. 7. DOI: 10.1520/Jai102923 |
0.365 |
|
| 2010 |
David E, Arrieta C, Dolez P, Vu-Khanh T, Couderc H, Fréchette MF. Dielectric properties of high performance fibers Annual Report - Conference On Electrical Insulation and Dielectric Phenomena, Ceidp. DOI: 10.1109/CEIDP.2010.5724094 |
0.729 |
|
| 2009 |
Dolez PI, Vu-Khanh T. Recent developments and needs in materials used for personal protective equipment and their testing. International Journal of Occupational Safety and Ergonomics : Jose. 15: 347-62. PMID 20003769 DOI: 10.1080/10803548.2009.11076815 |
0.303 |
|
| 2009 |
Vu Thi BN, Vu-Khanh T, Lara J. Mechanics and mechanism of cut resistance of protective materials Theoretical and Applied Fracture Mechanics. 52: 7-13. DOI: 10.1016/J.Tafmec.2009.06.008 |
0.391 |
|
| 2009 |
Vu-Khanh T, El Majdoubi M. Entropy change with yielding and fracture of polypropylene Theoretical and Applied Fracture Mechanics. 51: 111-116. DOI: 10.1016/J.Tafmec.2009.04.002 |
0.421 |
|
| 2009 |
Nguyen CT, Vu-Khanh T. Mechanics and mechanisms of puncture by medical needles Procedia Engineering. 1: 139-142. DOI: 10.1016/J.Proeng.2009.06.032 |
0.38 |
|
| 2009 |
Nguyen CT, Vu-Khanh T, Dolez PI, Lara J. Puncture of elastomer membranes by medical needles. Part II: Mechanics International Journal of Fracture. 155: 83-91. DOI: 10.1007/S10704-009-9325-8 |
0.366 |
|
| 2008 |
Harrabi L, Dolez PI, Vu-Khanh T, Lara J. Evaluation of the flexibility of protective gloves. International Journal of Occupational Safety and Ergonomics : Jose. 14: 61-8. PMID 18394327 DOI: 10.1080/10803548.2008.11076749 |
0.312 |
|
| 2008 |
Dolez PI, Vu-Khanh T, Nguyen CT, Guero G, Gauvin C, Lara J. Influence of medical needle characteristics on the resistance to puncture of protective glove materials Journal of Astm International. 5. DOI: 10.1520/Jai101364 |
0.347 |
|
| 2008 |
Dolez PI, Nohile C, Ha Anh T, Vu-Khanh T, Benoît R, Bellavigna-Ladoux O. Exploring the chemical aspects of truck tire blowouts and explosions Safety Science. 46: 1334-1344. DOI: 10.1016/J.Ssci.2007.10.004 |
0.357 |
|
| 2008 |
Harrabi L, Dolez PI, Vu-Khanh T, Lara J, Tremblay G, Nadeau S, Larivière C. Characterization of protective gloves stiffness: Development of a multidirectional deformation test method Safety Science. 46: 1025-1036. DOI: 10.1016/J.Ssci.2007.04.008 |
0.309 |
|
| 2005 |
Vu TBN, Vu-Khanh T, Lara J. Progress in the characterization of the cutting resistance of protective materials Journal of Astm International. 2: 399-413. DOI: 10.1520/Jai12148 |
0.375 |
|
| 2005 |
Nguyen CT, Vu-Khanh T, Lara J. A study on the puncture resistance of rubber materials used in protective clothing Journal of Astm International. 2: 245-258. DOI: 10.1520/Jai12147 |
0.35 |
|
| 2005 |
Vu Thi BN, Vu-Khanh T, Lara J. Effect of friction on cut resistance of polymers Journal of Thermoplastic Composite Materials. 18: 23-36. DOI: 10.1177/0892705705041157 |
0.35 |
|
| 2005 |
Ha Anh T, Vu-Khanh T. Prediction of mechanical properties of polychloroprene during thermo-oxidative aging 11th International Conference On Fracture 2005, Icf11. 6: 4485-4490. DOI: 10.1016/J.Polymertesting.2005.03.016 |
0.422 |
|
| 2005 |
Anh TH, Vu-Khanh T. Effects of thermal aging on fracture performance of polychloroprene Journal of Materials Science. 40: 5243-5248. DOI: 10.1007/S10853-005-4418-X |
0.411 |
|
| 2004 |
Anh TH, Vu-Khanh T. Thermoxidative aging effects on mechanical performances of polychloroprene Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series a/Chung-Kuo Kung Ch'Eng Hsuch K'An. 27: 753-761. DOI: 10.1080/02533839.2004.9670926 |
0.41 |
|
| 2004 |
Nguyen CT, Vu-Khanh T. Mechanics and mechanisms of puncture of elastomer membranes Journal of Materials Science. 39: 7361-7364. DOI: 10.1023/B:Jmsc.0000048751.55710.44 |
0.386 |
|
| 2004 |
Nguyen CT, Vu-Khanh T, Lara J. Puncture characterization of rubber membranes Theoretical and Applied Fracture Mechanics. 42: 25-33. DOI: 10.1016/J.Tafmec.2004.06.002 |
0.444 |
|
| 2004 |
Ho CH, Vu-Khanh T. Physical aging and time-temperature behavior concerning fracture performance of polycarbonate Theoretical and Applied Fracture Mechanics. 41: 103-114. DOI: 10.1016/J.Tafmec.2003.11.008 |
0.413 |
|
| 2004 |
Vu-Khanh T, Ho HC. Physical aging and rejuvenation of polycabonate Proceedings of the International Conference On Restoration, Recycling and Rejuvenation Technology For Engineering and Architecture Application. 257-264. |
0.308 |
|
| 2003 |
Ho Huu C, Vu-Khanh T. Effects of physical aging on yielding kinetics of polycarbonate Theoretical and Applied Fracture Mechanics. 40: 75-83. DOI: 10.1016/S0167-8442(03)00035-1 |
0.424 |
|
| 2003 |
Elmajdoubi M, Vu-Khanh T. Effect of cooling rate on fracture behavior of polypropylene Theoretical and Applied Fracture Mechanics. 39: 117-126. DOI: 10.1016/S0167-8442(02)00152-0 |
0.355 |
|
| 2003 |
Ho CH, Vu-Khanh T. Effects of time and temperature on physical aging of polycarbonate Theoretical and Applied Fracture Mechanics. 39: 107-116. DOI: 10.1016/S0167-8442(02)00151-9 |
0.408 |
|
| 2001 |
Anh TH, Vu-Khanh T. Fracture and yielding behaviors of polystyrene/ethylene-propylene rubber blends: Effects of interfacial agents Polymer Engineering and Science. 41: 2073-2081. DOI: 10.2495/Dm000201 |
0.337 |
|
| 2001 |
Aboutajeddine A, Vu-Khanh T. Effective mechanical properties of materials with coated inclusions Journal of Thermoplastic Composite Materials. 14: 225-243. DOI: 10.1106/Gjpk-Jud0-4R42-9T8T |
0.33 |
|
| 1999 |
Polizu S, Favis BD, Vu-Khanh T. Morphology-interface-property relationships in polystyrene/ethylene-propylene rubber blends. 2. Influence of areal density and interfacial saturation of diblock and triblock copolymer interfacial modifiers Macromolecules. 32: 3448-3456. DOI: 10.1021/Ma981481Y |
0.33 |
|
| 1999 |
Odje S, Vu-Khanh T, Cigana P, Favis BD. Influence of triblock copolymer interfacial modifiers on fracture behavior of polystyrene/ethylene-propylene rubber blends Polymer Engineering and Science. 39: 1265-1278. DOI: 10.1002/Pen.11514 |
0.304 |
|
| 1998 |
Vu-Khanh T. Time-temperature dependence in fracture behavior of high impact polystyrene Theoretical and Applied Fracture Mechanics. 29: 75-83. DOI: 10.1016/S0167-8442(98)00018-4 |
0.335 |
|
| 1997 |
Cigana P, Favis BD, Albert C, Vu-Khanh T. Morphology-interface-property relationships in polystyrene/ethylene-propylene rubber blends. 1. Influence of triblock copolymer interfacial modifiers Macromolecules. 30: 4163-4169. DOI: 10.1021/Ma960995Z |
0.312 |
|
| 1997 |
Vu-Khanh T, Yu Z. Mechanisms of brittle-ductile transition in toughened thermoplastics Theoretical and Applied Fracture Mechanics. 26: 177-183. DOI: 10.1016/S0167-8442(96)00047-X |
0.324 |
|
| 1997 |
Mamat A, Vu-Khanh T, Cigana P, Favis BD. Impact fracture behavior of nylon-6/ABS blends Journal of Polymer Science, Part B: Polymer Physics. 35: 2583-2592. DOI: 10.1002/(Sici)1099-0488(19971130)35:16<2583::Aid-Polb2>3.0.Co;2-R |
0.343 |
|
| 1996 |
Harras B, Cole KC, Vu-Khanh T. Optimization of the ultrasonic welding of PEEK-carbon composites Journal of Reinforced Plastics and Composites. 15: 174-182. DOI: 10.1177/073168449601500203 |
0.319 |
|
| 1995 |
Wang H, Vu-Khanh T, Le VN. Effects of Large Deflection on Mode II Fracture Test of Composite Materials Journal of Composite Materials. 29: 833-849. DOI: 10.1177/002199839502900608 |
0.312 |
|
| 1995 |
Wang H, vu-Khanh T. Fracture Mechanics and Mechanisms of Impact-Induced Delamination in Laminated Composites Journal of Composite Materials. 29: 156-178. DOI: 10.1177/002199839502900202 |
0.353 |
|
| 1995 |
Vu-Khanh T, Liu B. Prediction of fibre rearrangement and thermal expansion behaviour of deformed woven-fabric laminates Composites Science and Technology. 53: 183-191. DOI: 10.1016/0266-3538(95)00017-8 |
0.365 |
|
| 1994 |
Laroche D, Vu-Khanh T. Forming of Woven Fabric Composites Journal of Composite Materials. 28: 1825-1839. DOI: 10.1177/002199839402801805 |
0.34 |
|
| 1994 |
Wang H, vu-Khanh T. Damage Extension in Carbon Fiber/PEEK Crossply Laminates under Low Velocity Impact Journal of Composite Materials. 28: 684-707. DOI: 10.1177/002199839402800801 |
0.358 |
|
| 1994 |
Vu-Khanh T. Impact fracture characterization of polymer with ductile behavior Theoretical and Applied Fracture Mechanics. 21: 83-90. DOI: 10.1016/0167-8442(94)00027-1 |
0.321 |
|
| 1994 |
Vu-Khanh T, Denault J. Fracture behaviour of long fibre reinforced thermoplastics Journal of Materials Science. 29: 5732-5738. DOI: 10.1007/Bf00349973 |
0.351 |
|
| 1993 |
Xiao XR, vu-Khanh T. Effects of Remolding on Fracture Performance of APC-2 Composites: Mode-I Initiation, Propagation and Arrest Toughness Journal of Thermoplastic Composite Materials. 6: 323-341. DOI: 10.1177/089270579300600405 |
0.387 |
|
| 1993 |
Denault J, vu-Khanh T. Fiber/Matrix Interaction in Carbon/PEEK Composites Journal of Thermoplastic Composite Materials. 6: 190-204. DOI: 10.1177/089270579300600302 |
0.323 |
|
| 1993 |
Vu-Khanh T, Denault J. Effect of Molding Parameters on the Interfacial Strength in PEEK/Carbon Composites Journal of Reinforced Plastics and Composites. 12: 916-931. DOI: 10.1177/073168449301200806 |
0.358 |
|
| 1993 |
Daoust J, Vu-Khanh T, Ahlstrom C, Gérard JF. A finite element model of the fragmentation test for the case of a coated fiber Composites Science and Technology. 48: 143-149. DOI: 10.1016/0266-3538(93)90130-9 |
0.33 |
|
| 1993 |
Vu-Khanh T. Controlling the mechanical performance of composites Macromolecular Symposia. 70: 225-234. DOI: 10.1002/Masy.19930700124 |
0.378 |
|
| 1992 |
Denault J, Vu-Khanh T. Crystallization and fiber/matrix interaction during the molding of PEEK/carbon composites Polymer Composites. 13: 361-371. DOI: 10.1002/Pc.750130505 |
0.343 |
|
| 1991 |
Vu-Khanh T, Denault J, Habib P, Low A. The effects of injection molding on the mechanical behavior of long-fiber reinforced PBT/PET blends Composites Science and Technology. 40: 423-435. DOI: 10.1016/0266-3538(91)90032-K |
0.358 |
|
| 1991 |
Wang H, Vu-Khanh T. Impact-Induced delamination in [05, 905, 05] carbon fiber/polyetheretherketone composite laminates Polymer Engineering and Science. 31: 1301-1309. DOI: 10.1002/Pen.760311804 |
0.346 |
|
| 1991 |
Caramaro L, Chabert B, Chauchard J, Vu-Khanh T. Morphology and mechanical performance of polyphenylenesulfide carbon fiber composite Polymer Engineering and Science. 31: 1279-1285. DOI: 10.1002/Pen.760311708 |
0.343 |
|
| 1990 |
Sanschagrin B, Gauvin R, Fisa B, Vu-Khanh T. Weldlines in injection molded polypropylene: effect of filler shape Journal of Reinforced Plastics and Composites. 9: 194-208. DOI: 10.1177/073168449000900209 |
0.337 |
|
| 1990 |
Vu-Khanh T, Fisa B. Effects of fillers on fracture performance of thermoplastics: Strain energy density criterion Theoretical and Applied Fracture Mechanics. 13: 11-19. DOI: 10.1007/978-94-009-1954-9_3 |
0.327 |
|
| 1989 |
Denault J, Vu-Khanh T, Foster B. Tensile properties of injection molded long fiber thermoplastic composites Polymer Composites. 10: 313-321. DOI: 10.1002/Pc.750100507 |
0.338 |
|
| 1988 |
Fisa B, Vu-Khanh T, Remillard B. Extrusion of Mica Filled Polypropylene Journal of Thermoplastic Composite Materials. 1: 361-370. DOI: 10.1177/089270578800100404 |
0.321 |
|
| 1987 |
Vu-Khanh T. Survey of current status and future trends in reinforced plastics composites Polymer Composites. 8: 363-370. DOI: 10.1002/Pc.750080603 |
0.319 |
|
| 1986 |
Vu-Khanh T. CRACK-ARREST STUDY IN MODE II DELAMINATION IN COMPOSITES Polymer Composites. 8: 331-341. DOI: 10.1002/Pc.750080508 |
0.325 |
|
| 1986 |
Rémillard B, Vu-Khanh T, Fisa B, Naik S. Reaction injection molding of mica reinforced polyurethane Polymer Composites. 7: 395-403. DOI: 10.1002/Pc.750070517 |
0.41 |
|
| 1985 |
Vu-Khanh T, Charentenay FXD. Mechanics and mechanisms of impact fracture in semi‐ductile polymers Polymer Engineering and Science. 25: 841-850. DOI: 10.1002/Pen.760251309 |
0.33 |
|
| 1985 |
Vu-Khanh T, Sanschagrin B, Fisa B. Fracture of mica-reinforced polypropylene: mica concentration effect Polymer Composites. 6: 249-260. DOI: 10.1002/Pc.750060410 |
0.311 |
|
| Show low-probability matches. |