| Year |
Citation |
Score |
| 2004 |
Ruiz E, Trochu F, Gauvin R. Internal Stresses and Warpage of Thin Composite Parts Manufactured by RTM Advanced Composites Letters. 13: 96369350401300. DOI: 10.1177/096369350401300105 |
0.301 |
|
| 2003 |
Bréard J, Henzel Y, Trochu F, Gauvin R. Analysis of dynamic flows through porous media. Part II: Deformation of a double-scale fibrous reinforcement Polymer Composites. 24: 409-421. DOI: 10.1002/Pc.10039 |
0.418 |
|
| 2003 |
Bréard J, Henzel Y, Trochu F, Gauvin R. Analysis of dynamic flows through porous media. Part I: Comparison between saturated and unsaturated flows in fibrous reinforcements Polymer Composites. 24: 391-408. DOI: 10.1002/Pc.10038 |
0.413 |
|
| 1999 |
Robitaille F, Gauvin R. Compaction of textile reinforcements for composites manufacturing. III: Reorganization of the fiber network Polymer Composites. 20: 48-61. DOI: 10.1002/Pc.10334 |
0.414 |
|
| 1998 |
Pham X-, Trochu F, Remade J-, Gauvin R. Simulation Of Compression Resin Transfer Molding Wit Transactions On Engineering Sciences. 21. DOI: 10.2495/Cp980091 |
0.46 |
|
| 1998 |
Pham X, Trochu F, Gauvin R. Simulation of Compression Resin Transfer Molding with Displacement Control Journal of Reinforced Plastics and Composites. 17: 1525-1556. DOI: 10.1177/073168449801701704 |
0.477 |
|
| 1998 |
Wirth S, Gauvin R. Experimental Analysis of Mold Filling in Compression Resin Transfer Molding Journal of Reinforced Plastics and Composites. 17: 1414-1430. DOI: 10.1177/073168449801701602 |
0.438 |
|
| 1998 |
Wirth S, Gauvin R, Kendall K. Experimental Analysis of Core Crushing and Core Movementin RTM and SRIM Foam Cored Composite Parts Journal of Reinforced Plastics and Composites. 17: 964-988. DOI: 10.1177/073168449801701101 |
0.435 |
|
| 1998 |
Hammami A, Gauvin R, Trochu F, Touret O, Ferland P. Analysis of the Edge Effect on Flow Patterns in Liquid Composites Molding Applied Composite Materials. 5: 161-173. DOI: 10.1023/A:1008887400832 |
0.47 |
|
| 1998 |
Hammami A, Gauvin R, Trochu F. Modeling the edge effect in liquid composites molding Composites Part a-Applied Science and Manufacturing. 29: 603-609. DOI: 10.1016/S1359-835X(97)00120-6 |
0.418 |
|
| 1998 |
Robitaille F, Gauvin R. Compaction of textile reinforcements for composites manufacturing. II: Compaction and relaxation of dry and H2O‐saturated woven reinforcements Polymer Composites. 19: 543-557. DOI: 10.1002/Pc.10128 |
0.403 |
|
| 1998 |
Diallo ML, Gauvin R, Trochu F. Experimental analysis and simulation of flow through multi-layer fiber reinforcements in liquid composite molding Polymer Composites. 19: 246-256. DOI: 10.1002/Pc.10097 |
0.449 |
|
| 1998 |
Gauvin R, Trochu F. Key issues in numerical simulation for liquid composite molding processes Polymer Composites. 19: 233-240. DOI: 10.1002/Pc.10095 |
0.46 |
|
| 1998 |
Robitaille F, Gauvin R. Compaction of textile reinforcements for composites manufacturing. I: Review of experimental results Polymer Composites. 19: 198-216. DOI: 10.1002/Pc.10091 |
0.452 |
|
| 1997 |
Trochu F, Ferland P, Gauvin R. Functional Requirements of a Simulation Software for Liquid Molding Processes Science and Engineering of Composite Materials. 6: 209-218. DOI: 10.1515/Secm.1997.6.4.209 |
0.309 |
|
| 1997 |
Amazouz M, Gauvin R. Solving Heat Dissipation Problems in Unidirectional Composite Structure Journal of Reinforced Plastics and Composites. 16: 686-697. DOI: 10.1177/073168449701600802 |
0.365 |
|
| 1996 |
Hammami A, Trochu F, Gauvin R, Wirth S. Directional permeability measurement of deformed reinforcement Journal of Reinforced Plastics and Composites. 15: 552-562. DOI: 10.1177/073168449601500601 |
0.404 |
|
| 1996 |
Lebrun G, Gauvin R, Kendall KN. Experimental investigation of resin temperature and pressure during filling and curring in a flat steel RTM mould Composites Part a-Applied Science and Manufacturing. 27: 347-356. DOI: 10.1016/1359-835X(95)00050-C |
0.35 |
|
| 1996 |
Echaabi J, Trochu F, Gauvin R. Review Of Failure Criteria Of Fibrous Composite Materials Polymer Composites. 17: 786-798. DOI: 10.1002/Pc.10671 |
0.32 |
|
| 1996 |
Gauvin R, Trochu F, Lemenn Y, Diallo L. Permeability measurement and flow simulation through fiber reinforcement Polymer Composites. 17: 34-42. DOI: 10.1002/Pc.10588 |
0.445 |
|
| 1995 |
Lebrun G, Rudd CD, Gauvin R. Laminate Temperature Distributions and Filling Tine Prediction during Non-Isothermal Impregnation of Fibre Preforms Journal of Reinforced Plastics and Composites. 14: 1069-1080. DOI: 10.1177/073168449501401004 |
0.334 |
|
| 1995 |
Echaabi J, Trochu F, Gauvin R. A General Strength Theory for Composite Materials Based on Dual Kriging Interpolation Journal of Reinforced Plastics and Composites. 14: 211-232. DOI: 10.1177/073168449501400302 |
0.381 |
|
| 1995 |
Gao DM, Trochu F, Gauvin R. Heat Transfer Analysis of Non-isothermal Resin Transfer Molding by the Finite Element Method Materials and Manufacturing Processes. 10: 57-64. DOI: 10.1080/10426919508934998 |
0.396 |
|
| 1995 |
Trochu F, Boudreault J-, Gao DM, Gauvin R. Three-Dimensional Flow Simulations for the Resin Transfer Molding Process Materials and Manufacturing Processes. 10: 21-26. DOI: 10.1080/10426919508934995 |
0.448 |
|
| 1994 |
Gauvin R, Kerachni A, Fisa B. Variation of Mat Surface Density and Its Effect on Permeability Evaluation for RTM Modelling Journal of Reinforced Plastics and Composites. 13: 371-383. DOI: 10.1177/073168449401300408 |
0.393 |
|
| 1994 |
Trochu F, Gauvin R, Gao DM, Boudreault J. RTMFLOT: an integrated software environment for the computer simulation of the resin transfer molding process Journal of Reinforced Plastics and Composites. 13: 262-270. DOI: 10.1177/073168449401300306 |
0.389 |
|
| 1994 |
Lakshminarayana H, Boukhili R, Gauvin R. Impact response of laminated composite plates: Prediction and verification Composite Structures. 28: 61-72. DOI: 10.1016/0263-8223(94)90006-X |
0.336 |
|
| 1994 |
Lakshminarayana H, Boukhili R, Gauvin R. Finite element simulation of impact tests of laminated composite plates Composite Structures. 28: 47-59. DOI: 10.1016/0263-8223(94)90005-1 |
0.368 |
|
| 1993 |
Dong S, Gauvin R. Application of dynamic mechanical analysis for the study of the interfacial region in carbon fiber/epoxy composite materials Polymer Composites. 14: 414-420. DOI: 10.1002/Pc.750140508 |
0.398 |
|
| 1992 |
Trochu F, Gauvin R. Limitations of a Boundary-Fitted Finite Difference Method for the Simulation of the Resin Transfer Molding Process Journal of Reinforced Plastics and Composites. 11: 772-786. DOI: 10.1177/073168449201100704 |
0.48 |
|
| 1991 |
Li S, Gauvin R. Numerical Analysis of the Resin Flow in Resin Transfer Molding Journal of Reinforced Plastics and Composites. 10: 314-327. DOI: 10.1177/073168449101000306 |
0.451 |
|
| 1990 |
Sanschagrin B, Gauvin R, Fisa B, Vu-Khanh T. Weldlines in injection molded polypropylene: effect of filler shape Journal of Reinforced Plastics and Composites. 9: 194-208. DOI: 10.1177/073168449000900209 |
0.461 |
|
| 1987 |
Gauvin R. Investigating the Thermoformability of Uhmw-Polyethylene: Journal of Plastic Film and Sheeting. 3: 312-324. DOI: 10.1177/875608798700300408 |
0.384 |
|
| 1987 |
Gauvin R, Chibani M, Lafontaine P. The Modeling of Pressure Distribution in Resin Transfer Molding Journal of Reinforced Plastics and Composites. 6: 367-377. DOI: 10.1177/073168448700600406 |
0.391 |
|
| Show low-probability matches. |