| Year |
Citation |
Score |
| 2021 |
Belot I, Sun Y, Vidal D, Votsmeier M, Causse P, Trochu F, Bertrand F. A 3D additive manufacturing approach for the validation of a numerical wall-scale model of catalytic particulate filters Chemical Engineering Journal. 405: 126653. DOI: 10.1016/J.Cej.2020.126653 |
0.358 |
|
| 2020 |
Sun Y, Causse P, Benmokrane B, Trochu F. Permeability Measurement of Granular Porous Materials by a Modified Falling-Head Method Journal of Engineering Mechanics-Asce. 146: 4020101. DOI: 10.1061/(Asce)Em.1943-7889.0001840 |
0.312 |
|
| 2020 |
Huang W, Causse P, Hu H, Belouettar S, Trochu F. Transverse compaction of 2D glass woven fabrics based on material twins – Part II: Tow and fabric deformations Composite Structures. 237: 111963. DOI: 10.1016/J.Compstruct.2020.111963 |
0.412 |
|
| 2020 |
Huang W, Causse P, Hu H, Belouettar S, Trochu F. Transverse compaction of 2D glass woven fabrics based on material twins – Part I: Geometric analysis Composite Structures. 237: 111929. DOI: 10.1016/J.Compstruct.2020.111929 |
0.399 |
|
| 2020 |
Huang W, Causse P, Hu H, Trochu F. Numerical and experimental investigation of saturated transverse permeability of 2D woven glass fabrics based on material twins Polymer Composites. 41: 1341-1355. DOI: 10.1002/Pc.25458 |
0.347 |
|
| 2019 |
Madra A, Causse P, Trochu F, Adrien J, Maire E, Breitkopf P. Stochastic characterization of textile reinforcements in composites based on X-ray microtomographic scans Composite Structures. 224: 111031. DOI: 10.1016/J.Compstruct.2019.111031 |
0.392 |
|
| 2019 |
Huang W, Causse P, Brailovski V, Hu H, Trochu F. Reconstruction of mesostructural material twin models of engineering textiles based on Micro-CT Aided Geometric Modeling Composites Part a: Applied Science and Manufacturing. 124: 105481. DOI: 10.1016/J.Compositesa.2019.105481 |
0.392 |
|
| 2019 |
Huang W, Huang Q, Liu Y, Yang J, Hu H, Trochu F, Causse P. A Fourier based reduced model for wrinkling analysis of circular membranes Computer Methods in Applied Mechanics and Engineering. 345: 1114-1137. DOI: 10.1016/J.Cma.2018.09.012 |
0.358 |
|
| 2019 |
LeBel F, Ruiz É, Trochu F. Void content analysis and processing issues to minimize defects in liquid composite molding Polymer Composites. 40: 109-120. DOI: 10.1002/Pc.24609 |
0.324 |
|
| 2018 |
Karaki M, Hallal A, Younes R, Trochu F, Lafon P. In-plane permeability prediction model for non-crimp and 3D orthogonal fabrics Journal of the Textile Institute. 109: 1110-1126. DOI: 10.1080/00405000.2017.1409327 |
0.405 |
|
| 2018 |
Madra A, Breitkopf P, Raghavan B, Trochu F. Diffuse manifold learning of the geometry of woven reinforcements in composites Comptes Rendus Mecanique. 346: 532-538. DOI: 10.1016/J.Crme.2018.04.008 |
0.332 |
|
| 2017 |
Assaf B, Sobotka V, Trochu F. Measurement of the In-Plane Thermal Conductivity of Long Fiber Composites by Inverse Analysis Open Journal of Composite Materials. 7: 85-98. DOI: 10.4236/Ojcm.2017.72005 |
0.366 |
|
| 2017 |
LeBel F, Ruiz É, Trochu F. Experimental study of saturation by visible light transmission in dual-scale fibrous reinforcements during composite manufacturing: Journal of Reinforced Plastics and Composites. 36: 1693-1711. DOI: 10.1177/0731684417725187 |
0.389 |
|
| 2017 |
Bonnard B, Causse P, Trochu F. Experimental characterization of the pore size distribution in fibrous reinforcements of composite materials Journal of Composite Materials. 51: 3807-3818. DOI: 10.1177/0021998317694424 |
0.388 |
|
| 2017 |
Madra A, Adrien J, Breitkopf P, Maire E, Trochu F. A clustering method for analysis of morphology of short natural fibers in composites based on X-ray microtomography Composites Part a-Applied Science and Manufacturing. 102: 184-195. DOI: 10.1016/J.Compositesa.2017.07.028 |
0.368 |
|
| 2017 |
Madra A, Breitkopf P, Rassineux A, Trochu F. Image-based model reconstruction and meshing of woven reinforcements in composites International Journal For Numerical Methods in Engineering. 112: 1235-1252. DOI: 10.1002/Nme.5555 |
0.399 |
|
| 2016 |
Vernet N, Trochu F. Analysis of mesoscopic pore size in 3D-interlock fabrics and validation of a predictive permeability model Journal of Reinforced Plastics and Composites. 35: 471-486. DOI: 10.1177/0731684415617537 |
0.315 |
|
| 2016 |
Vernet N, Trochu F. In-plane and through-thickness permeability models for three-dimensional Interlock fabrics Journal of Composite Materials. 50: 1951-1969. DOI: 10.1177/0021998315597989 |
0.326 |
|
| 2016 |
Vernet N, Trochu F. Analysis and modeling of 3D Interlock fabric compaction behavior Composites Part a-Applied Science and Manufacturing. 80: 182-193. DOI: 10.1016/J.Compositesa.2015.10.024 |
0.389 |
|
| 2016 |
Fratta CD, Koutsoukis G, Klunker F, Trochu F, Ermanni P. Characterization of anisotropic permeability from flow front angle measurements Polymer Composites. 37: 2037-2052. DOI: 10.1002/Pc.23382 |
0.393 |
|
| 2015 |
Fratta CD, Klunker F, Trochu F, Ermanni P. Characterization of textile permeability as a function of fiber volume content with a single unidirectional injection experiment Composites Part a-Applied Science and Manufacturing. 77: 238-247. DOI: 10.1016/J.Compositesa.2015.05.021 |
0.42 |
|
| 2015 |
Gascón L, García JA, Lebel F, Ruiz E, Trochu F. Numerical prediction of saturation in dual scale fibrous reinforcements during Liquid Composite Molding Composites Part a: Applied Science and Manufacturing. 77: 275-284. DOI: 10.1016/J.Compositesa.2015.05.019 |
0.407 |
|
| 2015 |
Gascón L, García JA, LeBel F, Ruiz E, Trochu F. Erratum to: A two-phase flow model to simulate mold filling and saturation in Resin Transfer Molding International Journal of Material Forming. 9: 241-241. DOI: 10.1007/S12289-015-1232-0 |
0.337 |
|
| 2015 |
Gascón L, García JA, LeBel F, Ruiz E, Trochu F. A two-phase flow model to simulate mold filling and saturation in Resin Transfer Molding International Journal of Material Forming. DOI: 10.1007/S12289-015-1225-Z |
0.377 |
|
| 2014 |
Ravey C, Ruiz E, Trochu F. Determination of the optimal impregnation velocity in Resin Transfer Molding by capillary rise experiments and infrared thermography Composites Science and Technology. 99: 96-102. DOI: 10.1016/J.Compscitech.2014.05.019 |
0.39 |
|
| 2014 |
Vernet N, Ruiz E, Advani S, Alms JB, Aubert M, Barburski M, Barari B, Beraud JM, Berg DC, Correia N, Danzi M, Delavière T, Dickert M, Di Fratta C, Endruweit A, ... ... Trochu F, et al. Experimental determination of the permeability of engineering textiles: Benchmark II Composites Part a: Applied Science and Manufacturing. 61: 172-184. DOI: 10.1016/J.Compositesa.2014.02.010 |
0.318 |
|
| 2014 |
LeBel F, Fanaei AE, Ruiz E, Trochu F. Prediction of optimal flow front velocity to minimize void formation in dual scale fibrous reinforcements International Journal of Material Forming. 7: 93-116. DOI: 10.1007/S12289-012-1111-X |
0.415 |
|
| 2013 |
LeBel F, Fanaei AE, Ruiz E, Trochu F. Experimental characterization by fluorescence of capillary flows in dual-scale engineering fabrics Textile Research Journal. 83: 1634-1659. DOI: 10.1177/0040517512471742 |
0.4 |
|
| 2013 |
Gutiérrez J, Ruiz E, Trochu F. High-frequency vibrations on the compaction of dry fibrous reinforcements Advanced Composite Materials. 22: 13-27. DOI: 10.1080/09243046.2013.764778 |
0.381 |
|
| 2013 |
Gutiérrez J, Ruiz E, Trochu F. Exploring the behavior of glass fiber reinforcements under vibration-assisted compaction Journal of the Textile Institute. 104: 980-993. DOI: 10.1080/00405000.2013.770197 |
0.36 |
|
| 2013 |
Causse P, Ruiz E, Trochu F. Influence of preforming on the quality of curved composite parts manufactured by flexible injection International Journal of Material Forming. 6: 341-362. DOI: 10.1007/S12289-012-1090-Y |
0.428 |
|
| 2012 |
Causse P, Ruiz E, Trochu F. Spring-in behavior of curved composites manufactured by Flexible Injection Composites Part a-Applied Science and Manufacturing. 43: 1901-1913. DOI: 10.1016/J.Compositesa.2012.06.010 |
0.381 |
|
| 2011 |
Bensadoun F, Kchit N, Billotte C, Bickerton S, Trochu F, Ruiz E. A Study of Nanoclay Reinforcement of Biocomposites Made by Liquid Composite Molding International Journal of Polymer Science. 2011: 1-10. DOI: 10.1155/2011/964193 |
0.399 |
|
| 2011 |
Causse P, Ruiz E, Trochu F. Experimental Study of Flexible Injection to Manufacture Parts of Strong Curvature Polymer Composites. 32: 882-895. DOI: 10.1002/Pc.21096 |
0.389 |
|
| 2010 |
García JA, Gascón L, Chinesta F, Ruiz E, Trochu F. An efficient solver of the saturation equation in liquid composite molding processes International Journal of Material Forming. 3: 1295-1302. DOI: 10.1007/S12289-010-0681-8 |
0.411 |
|
| 2009 |
Irhirane EH, Echaabi J, Aboussaleh M, Hattabi M, Trochu F. Matrix and Fibre Stiffness Degradation of a Quasi-isotrope Graphite Epoxy Laminate Under Flexural Bending Test Journal of Reinforced Plastics and Composites. 28: 201-223. DOI: 10.1177/0731684407084213 |
0.362 |
|
| 2008 |
Zebdi O, Boukhili R, Trochu F. Optimum Design of a Composite Helical Spring by Multi-criteria Optimization Journal of Reinforced Plastics and Composites. 28: 1713-1732. DOI: 10.1177/0731684408090370 |
0.348 |
|
| 2007 |
Ruiz E, Achim V, Trochu F. Coupled Non-Conforming Finite Element and Finite Difference Approximation Based on Laminate Extrapolation to Simulate Liquid Composite Molding Processes. Part I: Isothermal Flow Science and Engineering of Composite Materials. 14: 85-112. DOI: 10.1515/Secm.2007.14.2.85 |
0.419 |
|
| 2007 |
Ruiz E, Trochu F. Coupled Non-Conforming Finite Element and Finite Difference Approximation Based on Laminate Extrapolation to Simulate Liquid Composite Molding Processes. Part II: Non-Isothermal Filling and Curing Science and Engineering of Composite Materials. 14: 113-144. DOI: 10.1515/Secm.2007.14.2.113 |
0.385 |
|
| 2007 |
Demaría C, Ruiz E, Trochu F. In‐plane anisotropic permeability characterization of deformed woven fabrics by unidirectional injection. Part II: Prediction model and numerical simulations Polymer Composites. 28: 812-827. DOI: 10.1002/Pc.20108 |
0.444 |
|
| 2007 |
Demaría C, Ruiz E, Trochu F. In‐plane anisotropic permeability characterization of deformed woven fabrics by unidirectional injection. Part I: Experimental results Polymer Composites. 28: 797-811. DOI: 10.1002/Pc.20107 |
0.436 |
|
| 2006 |
Ruiz E, Achim V, Soukane S, Trochu F, Bréard J. Optimization of injection flow rate to minimize micro/macro-voids formation in resin transfer molded composites Composites Science and Technology. 66: 475-486. DOI: 10.1016/J.Compscitech.2005.06.013 |
0.419 |
|
| 2006 |
Soukane S, Trochu F. Application of the level set method to the simulation of resin transfer molding Composites Science and Technology. 66: 1067-1080. DOI: 10.1016/J.Compscitech.2005.03.001 |
0.446 |
|
| 2006 |
Ruiz E, Trochu F. Multi-criteria thermal optimization in liquid composite molding to reduce processing stresses and cycle time Composites Part a-Applied Science and Manufacturing. 37: 913-924. DOI: 10.1016/J.Compositesa.2005.06.010 |
0.36 |
|
| 2006 |
Trochu F, Ruiz E, Achim V, Soukane S. Advanced numerical simulation of liquid composite molding for process analysis and optimization Composites Part a-Applied Science and Manufacturing. 37: 890-902. DOI: 10.1016/J.Compositesa.2005.06.003 |
0.47 |
|
| 2005 |
Carrier J, Aubin CE, Trochu F, Labelle H. Optimization of rib surgery parameters for the correction of scoliotic deformities using approximation models Journal of Biomechanical Engineering. 127: 680-691. PMID 16121539 DOI: 10.1115/1.1933879 |
0.335 |
|
| 2005 |
Assaf B, Menge H, Sobotka V, Trochu F. Development of a Characterization Mold to Measure the Transverse Thermal Conductivity of a Composite Material by Inverse Analysis Journal of Reinforced Plastics and Composites. 24: 1837-1854. DOI: 10.1177/0731684405052808 |
0.386 |
|
| 2005 |
Soukane S, Trochu F. New Remeshing Applications in Resin Transfer Molding Journal of Reinforced Plastics and Composites. 24: 1629-1653. DOI: 10.1177/0731684405050404 |
0.41 |
|
| 2005 |
Charlebois KM, Boukhili R, Zebdi O, Trochu F, Gasmi A. Evaluation of the physical and mechanical properties of braided fabrics and their composites Journal of Reinforced Plastics and Composites. 24: 1539-1554. DOI: 10.1177/0731684405050391 |
0.404 |
|
| 2005 |
Ruiz E, Trochu F. Thermomechanical properties during cure of glass-polyester RTM composites: Elastic and viscoelastic modeling Journal of Composite Materials. 39: 881-916. DOI: 10.1177/0021998305048732 |
0.37 |
|
| 2005 |
Ruiz E, Trochu F. Numerical analysis of cure temperature and internal stresses in thin and thick RTM parts Composites Part a-Applied Science and Manufacturing. 36: 806-826. DOI: 10.1016/J.Compositesa.2004.10.021 |
0.411 |
|
| 2005 |
Ruiz E, Trochu F. Comprehensive thermal optimization of liquid composite molding to reduce cycle time and processing stresses Polymer Composites. 26: 209-230. DOI: 10.1002/Pc.20077 |
0.407 |
|
| 2005 |
Joubaud L, Achim V, Trochu F. Numerical simulation of resin infusion and reinforcement consolidation under flexible cover Polymer Composites. 26: 417-427. DOI: 10.1002/Pc.20069 |
0.425 |
|
| 2004 |
Ruiz E, Trochu F, Gauvin R. Internal Stresses and Warpage of Thin Composite Parts Manufactured by RTM Advanced Composites Letters. 13: 96369350401300. DOI: 10.1177/096369350401300105 |
0.302 |
|
| 2004 |
Shojaei A, Trochu F, Ghaffarian SR, Karimian SMH, Lessard L. An experimental study of saturated and unsaturated permeabilities in Resin transfer molding based on unidirectional flow measurements Journal of Reinforced Plastics and Composites. 23: 1515-1536. DOI: 10.1177/0731684404039787 |
0.401 |
|
| 2004 |
Béchet E, Ruiz E, Trochu F, Cuilliere JC. Re-Meshing Algorithms Applied to Mould Filling Simulations in Resin Transfer Moulding Journal of Reinforced Plastics and Composites. 23: 17-36. DOI: 10.1177/0731684404028699 |
0.412 |
|
| 2003 |
Béchet E, Ruiz E, Trochu F. Adaptive mesh generation for mould filling problems in resin transfer moulding Composites Part a-Applied Science and Manufacturing. 34: 813-834. DOI: 10.1016/S1359-835X(03)00199-4 |
0.426 |
|
| 2003 |
Bréard J, Henzel Y, Trochu F, Gauvin R. Analysis of dynamic flows through porous media. Part II: Deformation of a double-scale fibrous reinforcement Polymer Composites. 24: 409-421. DOI: 10.1002/Pc.10039 |
0.394 |
|
| 2003 |
Bréard J, Henzel Y, Trochu F, Gauvin R. Analysis of dynamic flows through porous media. Part I: Comparison between saturated and unsaturated flows in fibrous reinforcements Polymer Composites. 24: 391-408. DOI: 10.1002/Pc.10038 |
0.398 |
|
| 2002 |
Béchet E, Cuilliere J, Trochu F. Generation of a finite element MESH from stereolithography (STL) files Computer-Aided Design. 34: 1-17. DOI: 10.1016/S0010-4485(00)00146-9 |
0.68 |
|
| 2000 |
Pham X, Trochu F. Analysis of the Consolidation in Flexible Bladder Process for Thin Composite Parts by Finite Element Method Journal of Reinforced Plastics and Composites. 19: 182-218. DOI: 10.1177/073168440001900301 |
0.459 |
|
| 1999 |
Trochu F, Sacépé N, Volkov O, Turenne S. Characterization of NiTi shape memory alloys using dual kriging interpolation Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 273: 395-399. DOI: 10.1016/S0921-5093(99)00305-6 |
0.347 |
|
| 1999 |
Pham X, Trochu F. Simulation of compression resin transfer molding to manufacture thin composite shells Polymer Composites. 20: 436-459. DOI: 10.1002/Pc.10369 |
0.465 |
|
| 1998 |
Remade J-, Breard J, Trochu F. A Natural Way To Simulate Flow DrivenInjections In Liquid Composite Molding Wit Transactions On Engineering Sciences. 21. DOI: 10.2495/Cp980101 |
0.367 |
|
| 1998 |
Pham X-, Trochu F, Remade J-, Gauvin R. Simulation Of Compression Resin Transfer Molding Wit Transactions On Engineering Sciences. 21. DOI: 10.2495/Cp980091 |
0.414 |
|
| 1998 |
Pham X, Trochu F, Gauvin R. Simulation of Compression Resin Transfer Molding with Displacement Control Journal of Reinforced Plastics and Composites. 17: 1525-1556. DOI: 10.1177/073168449801701704 |
0.406 |
|
| 1998 |
Hammami A, Gauvin R, Trochu F, Touret O, Ferland P. Analysis of the Edge Effect on Flow Patterns in Liquid Composites Molding Applied Composite Materials. 5: 161-173. DOI: 10.1023/A:1008887400832 |
0.421 |
|
| 1998 |
Hammami A, Gauvin R, Trochu F. Modeling the edge effect in liquid composites molding Composites Part a-Applied Science and Manufacturing. 29: 603-609. DOI: 10.1016/S1359-835X(97)00120-6 |
0.417 |
|
| 1998 |
Trochu F, Terriault P. Nonlinear modelling of hysteretic material laws by dual kriging and application Computer Methods in Applied Mechanics and Engineering. 151: 545-558. DOI: 10.1016/S0045-7825(97)00165-5 |
0.349 |
|
| 1998 |
Phan A, Trochu F. Application of dual kriging to structural shape optimization based on the boundary contour method Archive of Applied Mechanics. 68: 539-551. DOI: 10.1007/S004190050185 |
0.331 |
|
| 1998 |
Diallo ML, Gauvin R, Trochu F. Experimental analysis and simulation of flow through multi-layer fiber reinforcements in liquid composite molding Polymer Composites. 19: 246-256. DOI: 10.1002/Pc.10097 |
0.412 |
|
| 1998 |
Gauvin R, Trochu F. Key issues in numerical simulation for liquid composite molding processes Polymer Composites. 19: 233-240. DOI: 10.1002/Pc.10095 |
0.421 |
|
| 1997 |
Terriault P, Meunier MA, Trochu F. Application of dual kriging to the construction of a general phenomenological material law for shape memory alloys Journal of Intelligent Material Systems and Structures. 8: 605-618. DOI: 10.1177/1045389X9700800705 |
0.342 |
|
| 1997 |
Echaabi J, Trochu F. Failure mode dependent strength criteria for composite laminates Journal of Reinforced Plastics and Composites. 16: 926-945. DOI: 10.1177/073168449701601004 |
0.311 |
|
| 1997 |
Santis SD, Trochu F, Ostiguy G, Sol H, Berthelot JM. Material and structural characterization of the dynamic behavior of Shape Memory Alloy reinforced composites Journal of Composite Materials. 31: 1985-1998. DOI: 10.1177/002199839703101905 |
0.435 |
|
| 1997 |
Trochu F, Qian Y. Nonlinear finite element simulation of superelastic shape memory alloy parts Computers & Structures. 62: 799-810. DOI: 10.1016/S0045-7949(96)00288-X |
0.406 |
|
| 1996 |
Trochu F, Brailovski V, Meunier MA, Terriault P, Qian YY. Thermomechanical analysis of shape memory devices. Bio-Medical Materials and Engineering. 6: 389-403. PMID 9138650 DOI: 10.3233/Bme-1996-6601 |
0.335 |
|
| 1996 |
André B, Trochu F, Dansereau J. Approach for the smoothing of three-dimensional reconstructions of the human spine using dual Kriging interpolation. Medical & Biological Engineering & Computing. 34: 185-91. PMID 8762824 DOI: 10.1007/Bf02520072 |
0.303 |
|
| 1996 |
Hammami A, Trochu F, Gauvin R, Wirth S. Directional permeability measurement of deformed reinforcement Journal of Reinforced Plastics and Composites. 15: 552-562. DOI: 10.1177/073168449601500601 |
0.392 |
|
| 1996 |
Echaabi J, Trochu F. A Methodology to Derive the Implicit Equation of Failure Criteria for Fibrous Composite Laminates Journal of Composite Materials. 30: 1088-1114. DOI: 10.1177/002199839603001002 |
0.302 |
|
| 1996 |
Trochu F, Abong Y, Balazinski M, Larbrisseau P. Rough machining of free-form surfaces defined by dual kriging International Journal of Production Research. 34: 1603-1623. DOI: 10.1080/00207549608904986 |
0.304 |
|
| 1996 |
Brailovski V, Trochu F, Daigneault G. Temporal characteristics of shape memory linear actuators and their application to circuit breakers Materials and Design. 17: 151-158. DOI: 10.1016/S0261-3069(96)00049-0 |
0.311 |
|
| 1996 |
Trochu F, Hammami A, Benoit Y. Prediction of fibre orientation and net shape definition of complex composite parts Composites Part a-Applied Science and Manufacturing. 27: 319-328. DOI: 10.1016/1359-835X(95)00054-6 |
0.384 |
|
| 1996 |
Ferland P, Guittard D, Trochu F. Concurrent methods for permeability measurement in resin transfer molding Polymer Composites. 17: 149-158. DOI: 10.1002/Pc.10600 |
0.379 |
|
| 1996 |
Gauvin R, Trochu F, Lemenn Y, Diallo L. Permeability measurement and flow simulation through fiber reinforcement Polymer Composites. 17: 34-42. DOI: 10.1002/Pc.10588 |
0.406 |
|
| 1995 |
Echaabi J, Trochu F, Gauvin R. A General Strength Theory for Composite Materials Based on Dual Kriging Interpolation Journal of Reinforced Plastics and Composites. 14: 211-232. DOI: 10.1177/073168449501400302 |
0.393 |
|
| 1995 |
Gao DM, Trochu F, Gauvin R. Heat Transfer Analysis of Non-isothermal Resin Transfer Molding by the Finite Element Method Materials and Manufacturing Processes. 10: 57-64. DOI: 10.1080/10426919508934998 |
0.362 |
|
| 1995 |
Trochu F, Boudreault J-, Gao DM, Gauvin R. Three-Dimensional Flow Simulations for the Resin Transfer Molding Process Materials and Manufacturing Processes. 10: 21-26. DOI: 10.1080/10426919508934995 |
0.417 |
|
| 1995 |
Gillet Y, Meunier M, Brailovski V, Trochu F, Patoor E, Berveiller M. Comparison of Thermomechanical Models for Shape Memory Alloy Springs Journal De Physique Iv. 5: C8-1165-C8-1170. DOI: 10.1051/Jp4/1995581165 |
0.341 |
|
| 1995 |
Limaiem A, Trochu F. Geometric algorithms for the intersection of curves and surfaces Computers & Graphics. 19: 391-403. DOI: 10.1016/0097-8493(95)00009-2 |
0.326 |
|
| 1994 |
Trochu F, Gauvin R, Gao DM, Boudreault J. RTMFLOT: an integrated software environment for the computer simulation of the resin transfer molding process Journal of Reinforced Plastics and Composites. 13: 262-270. DOI: 10.1177/073168449401300306 |
0.373 |
|
| 1994 |
Kamanayo G, Trochu F, Sanschagrin B. Prediction of shrinkage by dual kriging for injection molded polypropylene plaques Advances in Polymer Technology. 13: 305-314. DOI: 10.1002/Adv.1994.060130406 |
0.336 |
|
| 1993 |
Trochu F, Gauvin R, Gao D-. Numerical analysis of the resin transfer molding process by the finite element method Advances in Polymer Technology. 12: 329-342. DOI: 10.1002/Adv.1993.060120401 |
0.469 |
|
| 1992 |
Trochu F, Gauvin R. Limitations of a Boundary-Fitted Finite Difference Method for the Simulation of the Resin Transfer Molding Process Journal of Reinforced Plastics and Composites. 11: 772-786. DOI: 10.1177/073168449201100704 |
0.465 |
|
| Show low-probability matches. |