Year |
Citation |
Score |
2020 |
Persenot T, Burr A, Dendievel R, Buffière J, Maire E, Lachambre J, Martin G. Fatigue performances of chemically etched thin struts built by selective electron beam melting: Experiments and predictions Materialia. 9: 100589. DOI: 10.1016/J.Mtla.2020.100589 |
0.357 |
|
2020 |
Dessolier T, Lhuissier P, Roussel-Dherbey F, Charlot F, Josserond C, Blandin J, Martin G. Effect of temperature on deformation mechanisms of AZ31 Mg-alloy under tensile loading Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 775: 138957. DOI: 10.1016/J.Msea.2020.138957 |
0.418 |
|
2019 |
Lechartier A, Meyer N, Estevez R, Mantel M, Martin G, Parry G, Veron M, Deschamps A. Deformation behavior of lean duplex stainless steels with strain induced martensitic transformation: Role of deformation mechanisms, alloy chemistry and predeformation Materialia. 5: 100190. DOI: 10.1016/J.Mtla.2018.100190 |
0.686 |
|
2019 |
Plancher E, Héraud L, Lhuissier P, Dendievel R, Fabrègue D, Blandin J, Martin G. Towards behavior by design: A case study on corrugated architectures Materials & Design. 166: 107604. DOI: 10.1016/J.Matdes.2019.107604 |
0.425 |
|
2019 |
Persenot T, Burr A, Martin G, Buffiere J, Dendievel R, Maire E. Effect of build orientation on the fatigue properties of as-built Electron Beam Melted Ti-6Al-4V alloy International Journal of Fatigue. 118: 65-76. DOI: 10.1016/J.Ijfatigue.2018.08.006 |
0.41 |
|
2019 |
Persenot T, Burr A, Plancher E, Buffière J, Dendievel R, Martin G. Effect of ultrasonic shot peening on the surface defects of thin struts built by electron beam melting: Consequences on fatigue resistance Additive Manufacturing. 28: 821-830. DOI: 10.1016/J.Addma.2019.06.014 |
0.316 |
|
2019 |
Plancher E, Gravier P, Chauvet E, Blandin J, Boller E, Martin G, Salvo L, Lhuissier P. Tracking pores during solidification of a Ni-based superalloy using 4D synchrotron microtomography. Acta Materialia. 181: 1-9. DOI: 10.1016/J.Actamat.2019.09.040 |
0.333 |
|
2019 |
Kontis P, Chauvet E, Peng Z, He J, Silva AKd, Raabe D, Tassin C, Blandin J, Abed S, Dendievel R, Gault B, Martin G. Atomic-scale grain boundary engineering to overcome hot-cracking in additively-manufactured superalloys Acta Materialia. 177: 209-221. DOI: 10.1016/J.Actamat.2019.07.041 |
0.377 |
|
2019 |
Formanoir Cd, Martin G, Prima F, Allain SYP, Dessolier T, Sun F, Vivès S, Hary B, Bréchet Y, Godet S. Micromechanical behavior and thermal stability of a dual-phase α+α’ titanium alloy produced by additive manufacturing Acta Materialia. 162: 149-162. DOI: 10.1016/J.Actamat.2018.09.050 |
0.597 |
|
2018 |
Persenot T, Martin G, Dendievel R, Buffiére J, Maire E. Enhancing the tensile properties of EBM as-built thin parts: Effect of HIP and chemical etching Materials Characterization. 143: 82-93. DOI: 10.1016/J.Matchar.2018.01.035 |
0.378 |
|
2018 |
Chauvet E, Kontis P, Jägle EA, Gault B, Raabe D, Tassin C, Blandin J, Dendievel R, Vayre B, Abed S, Martin G. Hot cracking mechanism affecting a non-weldable Ni-based superalloy produced by selective electron Beam Melting Acta Materialia. 142: 82-94. DOI: 10.1016/J.Actamat.2017.09.047 |
0.35 |
|
2017 |
Formanoir Cd, Brulard A, Vivès S, Martin G, Prima F, Michotte S, Rivière E, Dolimont A, Godet S. A strategy to improve the work-hardening behavior of Ti–6Al–4V parts produced by additive manufacturing Materials Research Letters. 5: 201-208. DOI: 10.1080/21663831.2016.1245681 |
0.325 |
|
2017 |
Persenot T, Buffiere J, Maire E, Dendievel R, Martin G. Fatigue properties of EBM as-built and chemically etched thin parts Procedia Structural Integrity. 7: 158-165. DOI: 10.1016/J.Prostr.2017.11.073 |
0.337 |
|
2017 |
Deschamps A, Martin G, Dendievel R, Van Landeghem HP. Lighter structures for transports: The role of innovation in metallurgy Comptes Rendus Physique. 18: 445-452. DOI: 10.1016/J.Crhy.2017.09.006 |
0.567 |
|
2017 |
Lechartier A, Martin G, Comby S, Roussel-Dherbey F, Deschamps A, Mantel M, Meyer N, Verdier M, Veron M. Influence of the Martensitic Transformation on the Microscale Plastic Strain Heterogeneities in a Duplex Stainless Steel Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 48: 20-25. DOI: 10.1007/S11661-016-3858-Z |
0.668 |
|
2016 |
Dancette S, Browet A, Martin G, Willemet M, Delannay L. Automatic processing of an orientation map into a finite element mesh that conforms to grain boundaries Modelling and Simulation in Materials Science and Engineering. 24. DOI: 10.1088/0965-0393/24/5/055014 |
0.363 |
|
2016 |
Martin G, Fabrègue D, Mercier F, Chafino-Aixa JA, Dendievel R, Blandin JJ. Coupling electron beam melting and spark plasma sintering: A new processing route for achieving titanium architectured microstructures Scripta Materialia. 122: 5-9. DOI: 10.1016/J.Scriptamat.2016.05.001 |
0.392 |
|
2016 |
Mas F, Martin G, Lhuissier P, Bréchet Y, Tassin C, Roch F, Todeschini P, Simar A. Heterogeneities in local plastic flow behavior in a dissimilar weld between low-alloy steel and stainless steel Materials Science and Engineering A. 667: 156-170. DOI: 10.1016/J.Msea.2016.04.082 |
0.69 |
|
2016 |
Lhuissier P, de Formanoir C, Martin G, Dendievel R, Godet S. Geometrical control of lattice structures produced by EBM through chemical etching: Investigations at the scale of individual struts Materials and Design. 110: 485-493. DOI: 10.1016/J.Matdes.2016.08.029 |
0.327 |
|
2016 |
de Formanoir C, Suard M, Dendievel R, Martin G, Godet S. Improving the mechanical efficiency of electron beam melted titanium lattice structures by chemical etching Additive Manufacturing. 11: 71-76. DOI: 10.1016/J.Addma.2016.05.001 |
0.341 |
|
2015 |
Sinclair CW, Martin G, Lebensohn RA. Factors contributing to plastic strain amplification in slip dominated deformation of magnesium alloys Modelling and Simulation in Materials Science and Engineering. 23. DOI: 10.1088/0965-0393/23/8/085002 |
0.447 |
|
2015 |
Suard M, Martin G, Lhuissier P, Dendievel R, Vignat F, Blandin JJ, Villeneuve F. Mechanical equivalent diameter of single struts for the stiffness prediction of lattice structures produced by Electron Beam Melting Additive Manufacturing. 8: 124-131. DOI: 10.1016/J.Addma.2015.10.002 |
0.322 |
|
2015 |
Martin G, Sinclair CW, Poole WJ, Azizi-Alizamini H. Local Plastic-Strain Heterogeneities and Their Impact on the Ductility of Mg Jom. DOI: 10.1007/S11837-015-1449-X |
0.419 |
|
2014 |
Sinclair CW, Martin G, Lebensohn RA. Combined Use of DIC, EBSD and Simulation to Understand the Microscale Plastic Strain Distribution in Mg Alloys Microscopy and Microanalysis. 20: 1462-1463. DOI: 10.1017/S1431927614009040 |
0.405 |
|
2014 |
Martin G, Sinclair CW, Lebensohn RA. Microscale plastic strain heterogeneity in slip dominated deformation of magnesium alloy containing rare earth Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 603: 37-51. DOI: 10.1016/J.Msea.2014.01.102 |
0.463 |
|
2013 |
Martin G, Veron M, Brechet Y, Chehab B, Fourmentin R, Mithieux J, Yerra SK, Delannay L, Pardoen T. Characterization of the hot cracking resistance using the Essential Work of Fracture (EWF): application to duplex stainless steels Rem-Revista Escola De Minas. 66: 145-151. DOI: 10.1590/S0370-44672013000200002 |
0.554 |
|
2013 |
Martin G, Sinclair CW, Schmitt J. Plastic strain heterogeneities in an Mg–1Zn–0.5Nd alloy Scripta Materialia. 68: 695-698. DOI: 10.1016/J.Scriptamat.2013.01.017 |
0.436 |
|
2013 |
Sampath KY, Martin G, Véron M, Bréchet Y, Mithieux JD, Delannay L, Pardoen T. Ductile fracture initiated by interface nucleation in two-phase elastoplastic systems Engineering Fracture Mechanics. 102: 77-100. DOI: 10.1016/J.Engfracmech.2013.02.028 |
0.577 |
|
2013 |
Martin G, Caldemaison D, Bornert M, Pinna C, Bréchet Y, Véron M, Mithieux JD, Pardoen T. Characterization of the High Temperature Strain Partitioning in Duplex Steels Experimental Mechanics. 53: 205-215. DOI: 10.1007/S11340-012-9628-Y |
0.461 |
|
2012 |
Martin G, Yerra SK, Bréchet Y, Véron M, Mithieux J, Chéhab B, Delannay L, Pardoen T. A macro- and micromechanics investigation of hot cracking in duplex steels Acta Materialia. 60: 4646-4660. DOI: 10.1016/J.Actamat.2012.03.040 |
0.608 |
|
Show low-probability matches. |