Year |
Citation |
Score |
2020 |
Cann JL, Luca AD, Dunand DC, Dye D, Miracle DB, Oh HS, Olivetti EA, Pollock TM, Poole WJ, Yang R, Tasan CC. Sustainability through alloy design: Challenges and opportunities Progress in Materials Science. 100722. DOI: 10.1016/J.Pmatsci.2020.100722 |
0.309 |
|
2020 |
Ansari N, Tran B, Poole WJ, Singh SS, Krishnaswamy H, Jain J. High temperature deformation behavior of Mg-5wt.%Y binary alloy: Constitutive analysis and processing maps Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 777: 139051. DOI: 10.1016/J.Msea.2020.139051 |
0.482 |
|
2020 |
Pérez-Prado M, Bohlen J, Yi S, Letzig D, Al-Samman T, Robson J, Barnett M, Poole W, Mendis C, Agnew S, Stanford N. Emerging Hot Topics and Research Questions in Wrought Magnesium Alloy Development Jom. 72: 2561-2567. DOI: 10.1007/S11837-020-04051-5 |
0.375 |
|
2020 |
Robson JD, Engler O, Sigli C, Deschamps A, Poole WJ. Advances in Microstructural Understanding of Wrought Aluminum Alloys Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 51: 4377-4389. DOI: 10.1007/S11661-020-05908-9 |
0.537 |
|
2019 |
Poole WJ, Wang X, Embury JD, Lloyd DJ. The effect of manganese on the microstructure and tensile response of an Al-Mg-Si alloy Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 755: 307-317. DOI: 10.1016/J.Msea.2019.03.015 |
0.537 |
|
2019 |
Mahmoodkhani Y, Chen J, Wells MA, Poole WJ, Parson NC. The Effect of Die Bearing Geometry on Surface Recrystallization During Extrusion of an Al-Mg-Si-Mn Alloy Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 50: 5324-5335. DOI: 10.1007/S11661-019-05437-0 |
0.494 |
|
2018 |
Lai Q, Sinclair CW, Poole WJ. The anisotropic kinetics of strain aging in a martensitic steel Canadian Metallurgical Quarterly. 57: 20-27. DOI: 10.1080/00084433.2017.1384211 |
0.412 |
|
2018 |
Nayyeri G, Poole WJ, Sinclair CW, Zaefferer S. Measurement of the critical resolved shear stress for basal slip in magnesium alloys using instrumented indentation Scripta Materialia. 156: 37-41. DOI: 10.1016/J.Scriptamat.2018.07.003 |
0.538 |
|
2018 |
Liu CL, Du Q, Parson NC, Poole WJ. The interaction between Mn and Fe on the precipitation of Mn/Fe dispersoids in Al-Mg-Si-Mn-Fe alloys Scripta Materialia. 152: 59-63. DOI: 10.1016/J.Scriptamat.2018.04.012 |
0.366 |
|
2018 |
Vaucorbeil Ad, Sinclair CW, Poole WJ. Atomistic insights into cluster strengthening in aluminum alloys Materialia. 4: 566-574. DOI: 10.1016/J.Mtla.2018.11.020 |
0.398 |
|
2018 |
Chen J, Poole WJ, Parson NC. The effect of through thickness texture variation on the anisotropic mechanical response of an extruded Al-Mn-Fe-Si alloy Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 730: 24-35. DOI: 10.1016/J.Msea.2018.05.105 |
0.487 |
|
2017 |
Liu CL, Azizi-Alizamini H, Parson NC, Poole WJ, Du Q. Microstructure evolution during homogenization of Al-Mg-Si-Mn-Fe alloys: Modelling and experimental results Transactions of Nonferrous Metals Society of China. 27: 747-753. DOI: 10.1016/S1003-6326(17)60085-2 |
0.476 |
|
2017 |
Nayyeri G, Poole WJ, Sinclair CW, Zaefferer S. The role of indenter radius on spherical indentation of high purity magnesium loaded nearly parallel to the c-axis Scripta Materialia. 137: 119-122. DOI: 10.1016/J.Scriptamat.2017.04.039 |
0.373 |
|
2017 |
Couturier L, Deschamps A, Geuser FD, Fazeli F, Poole WJ. An investigation of the strain dependence of dynamic precipitation in an Al-Zn-Mg-Cu alloy Scripta Materialia. 136: 120-123. DOI: 10.1016/J.Scriptamat.2017.04.031 |
0.46 |
|
2016 |
Garcin T, Militzer M, Poole WJ, Collins L. Microstructure model for the heat-affected zone of X80 linepipe steel Materials Science and Technology (United Kingdom). 32: 708-721. DOI: 10.1080/02670836.2016.1142705 |
0.42 |
|
2016 |
Nayyeri G, Poole WJ, Sinclair CW, Zaefferer S, Konijnenberg PJ, Zambaldi C. An instrumented spherical indentation study on high purity magnesium loaded nearly parallel to the c-axis Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 670: 132-145. DOI: 10.1016/J.Msea.2016.05.112 |
0.405 |
|
2015 |
Sohi M, Poole WJ, Sinclair CW, Gallerneault M. Yield strength of twin-belt cast Al–Mg–Sc–Zr alloy after annealing Materials Science and Technology. 31: 460-467. DOI: 10.1179/1743284714Y.0000000629 |
0.591 |
|
2015 |
Jain J, Cizek P, Poole WJ, Barnett MR. The role of back stress caused by precipitates on {101¯2} twinning in a Mg–6Zn alloy Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 647: 66-73. DOI: 10.1016/J.Msea.2015.08.091 |
0.552 |
|
2015 |
Martin G, Sinclair CW, Poole WJ, Azizi-Alizamini H. Local Plastic-Strain Heterogeneities and Their Impact on the Ductility of Mg Jom. DOI: 10.1007/S11837-015-1449-X |
0.442 |
|
2015 |
Mahmoodkhani Y, Wells MA, Poole WJ, Grajales L, Parson N. The Development of Grain Structure During Axisymmetric Extrusion of AA3003 Aluminum Alloys Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. DOI: 10.1007/S11661-015-3168-X |
0.489 |
|
2014 |
Mahmoodkhani Y, Wells M, Parson N, Jowett C, Poole W. Modeling the Formation of Transverse Weld during Billet-on-Billet Extrusion. Materials (Basel, Switzerland). 7: 3470-3480. PMID 28788629 DOI: 10.3390/Ma7053470 |
0.414 |
|
2014 |
Poole WJ, Wells MA, Azizi-Alizamini H, Parson NC. Through process modelling of extrusion for AA3xxx alloys Materials Science Forum. 794: 682-690. DOI: 10.4028/Www.Scientific.Net/Msf.794-796.682 |
0.471 |
|
2014 |
Mahmoodkhani Y, Wells MA, Grajales L, Poole WJ, Parson NC. Material flow and grain deformation during extrusion Materials Science Forum. 794: 664-669. DOI: 10.4028/Www.Scientific.Net/Msf.794-796.664 |
0.461 |
|
2014 |
Vaucorbeil Ad, Poole WJ, Sinclair CW. The effect of obstacle strength distribution on the critical resolved shear stress of engineering alloys Materials Science Forum. 449-454. DOI: 10.4028/Www.Scientific.Net/Msf.794-796.449 |
0.417 |
|
2014 |
Liu CL, Azizi-Alizamini H, Parson NC, Poole WJ. The effect of Mn on microstructure evolution during homogenization of Al-Mg-Si-Mn alloys Materials Science Forum. 794: 1199-1204. DOI: 10.4028/Www.Scientific.Net/Msf.794-796.1199 |
0.521 |
|
2014 |
Chen J, Poole WJ, Parson NC. The effect of homogenization conditions on extrusion texture and microstructure evolution in AA3003 Materials Science Forum. 794: 1127-1132. DOI: 10.4028/Www.Scientific.Net/Msf.794-796.1127 |
0.39 |
|
2014 |
Kulakov M, Poole WJ, Militzer M. A Microstructure Evolution Model for Intercritical Annealing of a Low-carbon Dual-phase Steel Isij International. 54: 2627-2636. DOI: 10.2355/Isijinternational.54.2627 |
0.422 |
|
2014 |
Araki A, Poole WJ, Kobayashi E, Sato T. Twinning induced plasticity and work hardening behavior of aged CuNiSi alloy Materials Transactions. 55: 501-505. DOI: 10.2320/Matertrans.Mbw201326 |
0.53 |
|
2014 |
Colley LJ, Wells MA, Poole WJ. Microstructure-strength models for heat treatment of Al-Si-Mg casting alloys I: Microstructure evolution and precipitation kinetics Canadian Metallurgical Quarterly. 53: 125-137. DOI: 10.1179/1879139513Y.0000000112 |
0.525 |
|
2014 |
Colley LJ, Wells MA, Poole WJ. Microstructure-yield strength models for heat treatment of Al-Si-Mg casting alloys II: Modelling microstructure and yield strength evolution Canadian Metallurgical Quarterly. 53: 138-150. DOI: 10.1179/1879139513Y.0000000111 |
0.527 |
|
2014 |
Mahmoodkhani Y, Wells MA, Parson N, Poole WJ. Numerical modelling of the material flow during extrusion of aluminium alloys and transverse weld formation Journal of Materials Processing Technology. 214: 688-700. DOI: 10.1016/J.Jmatprotec.2013.09.028 |
0.478 |
|
2014 |
Lee S, Wang H, Gharghouri M, Nayyeri G, Woo W, Shin E, Wu P, Poole WJ, Wu W, An K. Deformation behavior of solid-solution-strengthened Mg-9 wt.% Al alloy: In situ neutron diffraction and elastic-viscoplastic self-consistent modeling Acta Materialia. 73: 139-148. DOI: 10.1016/J.Actamat.2014.03.038 |
0.529 |
|
2013 |
Militzer M, Garcin T, Poole WJ. In Situ Measurements of Grain Growth and Recrystallization by Laser Ultrasonics Materials Science Forum. 753: 25-30. DOI: 10.4028/Www.Scientific.Net/Msf.753.25 |
0.395 |
|
2013 |
Vaucorbeil Ad, Sinclair CW, Poole WJ. Dislocation glide through non-randomly distributed point obstacles Philosophical Magazine. 93: 3664-3679. DOI: 10.1080/14786435.2013.820384 |
0.315 |
|
2013 |
Vaucorbeil Ad, Poole WJ, Sinclair CW. The superposition of strengthening contributions in engineering alloys Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 582: 147-154. DOI: 10.1016/J.Msea.2013.06.032 |
0.452 |
|
2013 |
Habibnejad-Korayem M, Mahmudi R, Poole WJ. Work hardening behavior of Mg-based nano-composites strengthened by Al2O3 nano-particles Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 567: 89-94. DOI: 10.1016/J.Msea.2012.12.083 |
0.428 |
|
2013 |
Marceau RKW, Vaucorbeil Ad, Sha G, Ringer SP, Poole WJ. Analysis of strengthening in AA6111 during the early stages of aging: atom probe tomography and yield stress modelling Acta Materialia. 61: 7285-7303. DOI: 10.1016/J.Actamat.2013.08.033 |
0.437 |
|
2013 |
Du Q, Poole WJ, Wells MA, Parson NC. Microstructure evolution during homogenization of Al-Mn-Fe-Si alloys: Modeling and experimental results Acta Materialia. 61: 4961-4973. DOI: 10.1016/J.Actamat.2013.04.050 |
0.496 |
|
2013 |
Jain J, Cizek P, Poole WJ, Barnett MR. Precipitate characteristics and their effect on the prismatic-slip-dominated deformation behaviour of an Mg–6 Zn alloy Acta Materialia. 61: 4091-4102. DOI: 10.1016/J.Actamat.2013.03.033 |
0.583 |
|
2013 |
Kulakov M, Poole WJ, Militzer M. The Effect of the Initial Microstructure on Recrystallization and Austenite Formation in a DP600 Steel Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 44: 3564-3576. DOI: 10.1007/S11661-013-1721-Z |
0.49 |
|
2013 |
Tomlinson P, Azizi-Alizamini H, Poole WJ, Sinclair CW, Gharghouri MA. Biaxial Deformation of the Magnesium Alloy AZ80 Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 44: 2970-2983. DOI: 10.1007/S11661-013-1707-X |
0.459 |
|
2012 |
Raeisinia B, Poole WJ. Modelling the elastic–plastic transition of polycrystalline metals with a distribution of grain sizes Modelling and Simulation in Materials Science and Engineering. 20: 15015. DOI: 10.1088/0965-0393/20/1/015015 |
0.436 |
|
2012 |
Jain J, Poole WJ, Sinclair CW. The deformation behaviour of the magnesium alloy AZ80 at 77 and 293 K Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 547: 128-137. DOI: 10.1016/J.Msea.2012.04.003 |
0.5 |
|
2012 |
Du Q, Poole WJ, Wells MA. A mathematical model coupled to CALPHAD to predict precipitation kinetics for multicomponent aluminum alloys Acta Materialia. 60: 3830-3839. DOI: 10.1016/J.Actamat.2012.02.050 |
0.508 |
|
2012 |
Maalekian M, Radis R, Militzer M, Moreau A, Poole WJ. In situ measurement and modelling of austenite grain growth in a Ti/Nb microalloyed steel Acta Materialia. 60: 1015-1026. DOI: 10.1016/J.Actamat.2011.11.016 |
0.43 |
|
2011 |
Jain J, Zou J, Sinclair CW, Poole WJ. Double tensile twinning in a Mg-8Al-0.5Zn alloy. Journal of Microscopy. 242: 26-36. PMID 21118228 DOI: 10.1111/J.1365-2818.2010.03434.X |
0.663 |
|
2011 |
Azizi-Alizamini H, Militzer M, Poole WJ. Formation of Ultrafine Grained Dual Phase Steels through Rapid Heating Isij International. 51: 958-964. DOI: 10.2355/Isijinternational.51.958 |
0.434 |
|
2011 |
Du Q, Poole WJ, Wells MA, Parson N. Microstructural modeling of the homogenization heat treatment for AA3XXX alloys Jom. 63: 35-39. DOI: 10.1007/S11837-011-0107-1 |
0.475 |
|
2011 |
Azizi-Alizamini H, Militzer M, Poole WJ. Austenite Formation in Plain Low-Carbon Steels Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 42: 1544-1557. DOI: 10.1007/S11661-010-0551-5 |
0.421 |
|
2010 |
Serizawa A, Sato T, Poole WJ. The characterization of dislocation–nanocluster interactions in Al–Mg–Si(–Cu/Ag) alloys Philosophical Magazine Letters. 90: 279-287. DOI: 10.1080/09500831003633231 |
0.492 |
|
2010 |
Habibnejad-Korayem M, Mahmudi R, Ghasemi HM, Poole WJ. Tribological behavior of pure Mg and AZ31 magnesium alloy strengthened by Al2O3 nano-particles Wear. 268: 405-412. DOI: 10.1016/J.Wear.2009.08.031 |
0.494 |
|
2010 |
Jain J, Poole WJ, Sinclair CW, Gharghouri MA. Reducing the tension–compression yield asymmetry in a Mg–8Al–0.5Zn alloy via precipitation Scripta Materialia. 62: 301-304. DOI: 10.1016/J.Scriptamat.2009.11.024 |
0.555 |
|
2009 |
Habibnejad-Korayem M, Mahmudi R, Poole WJ. Enhanced properties of Mg-based nano-composites reinforced with Al2O3 nano-particles Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 519: 198-203. DOI: 10.1016/J.Msea.2009.05.001 |
0.42 |
|
2008 |
Raeisinia B, Sinclair CW, Poole WJ, Tomé CN. On the impact of grain size distribution on the plastic behaviour of polycrystalline metals Modelling and Simulation in Materials Science and Engineering. 16: 25001. DOI: 10.1088/0965-0393/16/2/025001 |
0.394 |
|
2008 |
Proudhon H, Poole WJ, Wang X, Brechet YJ. The role of internal stresses on the plastic deformation of the Al–Mg–Si–Cu alloy AA6111 Philosophical Magazine. 88: 621-640. DOI: 10.1080/14786430801894569 |
0.412 |
|
2008 |
Fazeli F, Poole WJ, Sinclair CW. Modeling the effect of Al3Sc precipitates on the yield stress and work hardening of an Al–Mg–Sc alloy Acta Materialia. 56: 1909-1918. DOI: 10.1016/J.Actamat.2007.12.039 |
0.532 |
|
2008 |
Sarkar S, Moreau A, Militzer M, Poole WJ. Evolution of Austenite Recrystallization and Grain Growth Using Laser Ultrasonics Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 39: 897-907. DOI: 10.1007/S11661-007-9461-6 |
0.467 |
|
2007 |
Liu DS, Militzer M, Poole WJ. Microstructure Model for a Dual-Phase Steel Materials Science Forum. 4391-4396. DOI: 10.4028/Www.Scientific.Net/Msf.539-543.4391 |
0.461 |
|
2007 |
Esmaeili S, Vaumousse D, Zandbergen MW, Poole WJ, Cerezo A, Lloyd DJ. A study on the early-stage decomposition in the Al–Mg–Si–Cu alloy AA6111 by electrical resistivity and three-dimensional atom probe Philosophical Magazine. 87: 3797-3816. DOI: 10.1080/14786430701408312 |
0.707 |
|
2007 |
Azizi-Alizamini H, Militzer M, Poole WJ. A novel technique for developing bimodal grain size distributions in low carbon steels Scripta Materialia. 57: 1065-1068. DOI: 10.1016/J.Scriptamat.2007.08.035 |
0.409 |
|
2007 |
Huang J, Vogel SC, Poole WJ, Militzer M, Jacques P. The study of low-temperature austenite decomposition in a Fe-C-Mn-Si steel using the neutron Bragg edge transmission technique Acta Materialia. 55: 2683-2693. DOI: 10.1016/J.Actamat.2006.11.049 |
0.328 |
|
2007 |
Liu D, Fazeli F, Militzer M, Poole WJ. A Microstructure Evolution Model for Hot Rolling of a Mo-TRIP Steel Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 38: 894-909. DOI: 10.1007/S11661-007-9116-7 |
0.448 |
|
2007 |
Mazinani M, Poole WJ. Effect of martensite plasticity on the deformation behavior of a low-carbon dual-phase steel Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 38: 328-339. DOI: 10.1007/S11661-006-9023-3 |
0.438 |
|
2006 |
Fazeli F, Poole WJ, Sinclair CW. Work Hardening Behaviour of an Al-2.8Mg-0.16Sc Alloy Materials Science Forum. 961-966. DOI: 10.4028/Www.Scientific.Net/Msf.519-521.961 |
0.523 |
|
2006 |
Proudhon H, Poole WJ. The Bauschinger Effect in AA 6111 Materials Science Forum. 913-918. DOI: 10.4028/Www.Scientific.Net/Msf.519-521.913 |
0.38 |
|
2006 |
Embury JD, Poole WJ, Lloyd DJ. The Work Hardening of Single Phase and Multi-Phase Aluminium Alloys Materials Science Forum. 71-78. DOI: 10.4028/Www.Scientific.Net/Msf.519-521.71 |
0.523 |
|
2006 |
Wang X, Poole WJ, Embury JD, Lloyd DJ. Delineating the Role of Second Phase Particles in AA6111 Materials Science Forum. 1913-1918. DOI: 10.4028/Www.Scientific.Net/Msf.519-521.1913 |
0.382 |
|
2006 |
Fabrègue D, Deschamps A, Suéry M, Poole WJ. Mechanical behaviour in the mushy state during isothermal tensile testing Materials Science Forum. 519: 1877-1882. DOI: 10.4028/Www.Scientific.Net/Msf.519-521.1877 |
0.52 |
|
2006 |
Sarkar S, Wells MA, Poole WJ. A Comparative Study on the Softening Behaviour of Cold Rolled Ingot and Continuous Cast AA5754 Materials Science Forum. 1641-1646. DOI: 10.4028/Www.Scientific.Net/Msf.519-521.1641 |
0.446 |
|
2006 |
Raeisinia B, Poole WJ. Electrical Resistivity Measurements: A Sensitive Tool for Studying Aluminium Alloys Materials Science Forum. 1391-1396. DOI: 10.4028/Www.Scientific.Net/Msf.519-521.1391 |
0.462 |
|
2006 |
Mazinani M, Poole WJ. Deformation Behaviour of Martensite in a Low-Carbon Dual-Phase Steel Advanced Materials Research. 774-779. DOI: 10.4028/Www.Scientific.Net/Amr.15-17.774 |
0.496 |
|
2006 |
Azizi-Alizamini H, Militzer M, Poole WJ. Formation of Ultrafine Grained Low Carbon Steels via Martensite Deformation and Annealing Advanced Materials Research. 750-755. DOI: 10.4028/Www.Scientific.Net/Amr.15-17.750 |
0.52 |
|
2006 |
Sinclair CW, Poole WJ, Bréchet Y. A model for the grain size dependent work hardening of copper Scripta Materialia. 55: 739-742. DOI: 10.1016/J.Scriptamat.2006.05.018 |
0.433 |
|
2006 |
Genevois C, Fabrègue D, Deschamps A, Poole WJ. On the coupling between precipitation and plastic deformation in relation with friction stir welding of AA2024 T3 aluminium alloy Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 441: 39-48. DOI: 10.1016/J.Msea.2006.07.151 |
0.54 |
|
2006 |
Sarkar S, Wells MA, Poole WJ. Softening behaviour of cold rolled continuous cast and ingot cast aluminum alloy AA5754 Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 421: 276-285. DOI: 10.1016/J.Msea.2006.01.069 |
0.4 |
|
2006 |
Raeisinia B, Poole WJ, Lloyd DJ. Examination of precipitation in the aluminum alloy AA6111 using electrical resistivity measurements Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 420: 245-249. DOI: 10.1016/J.Msea.2006.01.042 |
0.447 |
|
2006 |
Raeisinia B, Poole WJ, Wang X, Lloyd DJ. A model for predicting the yield stress of AA6111 after multistep heat treatments Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 37: 1183-1190. DOI: 10.1007/S11661-006-1069-8 |
0.418 |
|
2006 |
Fabregue DF, Deschamps A, Suery M, Poole WJ. Rheological behavior of Al-Mg-Si-Cu alloys in the mushy state obtained by partial remelting and partial solidification at high cooling rate Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 37: 1459-1467. DOI: 10.1007/S11661-006-0090-2 |
0.574 |
|
2005 |
Poole WJ, Wang X, Lloyd DJ, Embury JD. The shearable–non-shearable transition in Al–Mg–Si–Cu precipitation hardening alloys: implications on the distribution of slip, work hardening and fracture Philosophical Magazine. 85: 3113-3135. DOI: 10.1080/14786430500154935 |
0.482 |
|
2005 |
Poole WJ, Charras N. An experimental study on the effect of damage on the stress–strain behaviour for Al–Si model composites Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 406: 300-308. DOI: 10.1016/J.Msea.2005.06.041 |
0.375 |
|
2005 |
Cáceres CH, Poole WJ, Bowles AL, Davidson CJ. Section thickness, macrohardness and yield strength in high-pressure diecast magnesium alloy AZ91 Materials Science and Engineering A. 402: 269-277. DOI: 10.1016/J.Msea.2005.04.024 |
0.482 |
|
2005 |
Esmaeili S, Lloyd DJ, Poole WJ. Effect of natural aging on the resistivity evolution during artificial aging of the aluminum alloy AA6111 Materials Letters. 59: 575-577. DOI: 10.1016/J.Matlet.2004.10.052 |
0.695 |
|
2004 |
Huang J, Poole WJ, Militzer M. Austenite formation during intercritical annealing Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 35: 3363-3375. DOI: 10.1007/S11661-004-0173-X |
0.46 |
|
2003 |
Militzer M, Poole WJ, Wells MA. Microstructure Engineering for Continuous Annealing of Steels and Aluminum Alloys Materials Science Forum. 3783-3788. DOI: 10.4028/Www.Scientific.Net/Msf.426-432.3783 |
0.481 |
|
2003 |
Go J, Poole WJ, Militzer M, Wells MA. The Interaction between Precipitation and Recrystallization during Annealing of Cold Rolled AA6111 Materials Science Forum. 291-296. DOI: 10.4028/Www.Scientific.Net/Msf.426-432.291 |
0.378 |
|
2003 |
Deschamps A, Militzer M, Poole WJ. Comparison of Precipitation Kinetics and Strengthening in an Fe-0.8%Cu Alloy and a 0.8%Cu-containing Low-carbon Steel Isij International. 43: 1826-1832. DOI: 10.2355/Isijinternational.43.1826 |
0.506 |
|
2003 |
Poole WJ, Militzer M, Wells MA. Modelling recovery and recrystallisation during annealing of AA 5754 aluminium alloy Materials Science and Technology. 19: 1361-1368. DOI: 10.1179/026708303225005980 |
0.503 |
|
2003 |
Esmaeili S, Lloyd DJ, Poole WJ. Modeling of precipitation hardening for the naturally aged Al-Mg-Si-Cu alloy AA6111 Acta Materialia. 51: 3467-3481. DOI: 10.1016/S1359-6454(03)00167-8 |
0.739 |
|
2003 |
Esmaeili S, Lloyd DJ, Poole WJ. A yield strength model for the Al-Mg-Si-Cu alloy AA6111 Acta Materialia. 51: 2243-2257. DOI: 10.1016/S1359-6454(03)00028-4 |
0.755 |
|
2003 |
Ganguly P, Poole WJ. In situ measurement of reinforcement stress in an aluminum-alumina metal matrix composite under compressive loading Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 352: 46-54. DOI: 10.1016/S0921-5093(02)00450-1 |
0.328 |
|
2003 |
Esmaeili S, Wang X, Lloyd DJ, Poole WJ. On the Precipitation-Hardening Behavior of the Al-Mg-Si-Cu Alloy AA6111 Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 34: 751-763. DOI: 10.1007/S11661-003-1003-2 |
0.744 |
|
2003 |
Wang X, Embury JD, Poole WJ, Esmaeili S, Lloyd DJ. Precipitation strengthening of the aluminum alloy AA6111 Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 34: 2913-2924. DOI: 10.1007/S11661-003-0191-0 |
0.734 |
|
2003 |
Cheng LM, Poole WJ, Embury JD, Lloyd DJ. The Influence of Precipitation on the Work-Hardening Behavior of the Aluminum Alloys AA6111 and AA7030 Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 34: 2473-2481. DOI: 10.1007/S11661-003-0007-2 |
0.53 |
|
2002 |
Cheng LM, Esmaeili S, Poole WJ, Lloyd DJ. The Effect of Precipitation State on the Plastic Deformation Behaviour of AA6111 Aluminum Alloy Materials Science Forum. 1013-1018. DOI: 10.4028/Www.Scientific.Net/Msf.396-402.1013 |
0.746 |
|
2002 |
Guiglionda G, Poole WJ. The role of damage on the deformation and fracture of Al–Si eutectic alloys Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 336: 159-169. DOI: 10.1016/S0921-5093(01)01971-2 |
0.49 |
|
2002 |
Ganguly P, Poole WJ. Characterization of reinforcement distribution inhomogeneity in metal matrix composites Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 332: 301-310. DOI: 10.1016/S0921-5093(01)01757-9 |
0.305 |
|
2002 |
Cáceres CH, Poole WJ. Hardness and flow strength in particulate metal matrix composites Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 332: 311-317. DOI: 10.1016/S0921-5093(01)01744-0 |
0.379 |
|
2001 |
Deschamps A, Militzer M, Poole WJ. Precipitation Kinetics and Strengthening of a Fe-0.8wt%Cu Alloy Isij International. 41: 196-205. DOI: 10.2355/Isijinternational.41.196 |
0.541 |
|
2001 |
Ganguly P, Poole WJ, Lloyd DJ. Deformation and fracture characteristics of AA6061-Al2O3 particle reinforced metal matrix composites at elevated temperatures Scripta Materialia. 44: 1099-1105. DOI: 10.1016/S1359-6462(00)00704-1 |
0.327 |
|
2001 |
Esmaeili S, Cheng LM, Deschamps A, Lloyd DJ, Poole WJ. The deformation behaviour of AA6111 as a function of temperature and precipitation state Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 319: 461-465. DOI: 10.1016/S0921-5093(01)01113-3 |
0.723 |
|
2001 |
Charleux M, Poole WJ, Militzer M, Deschamps A. Precipitation behavior and its effect on strengthening of an HSLA-Nb/ti steel Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 32: 1635-1647. DOI: 10.1007/S11661-001-0142-6 |
0.524 |
|
2000 |
Esmaeili S, Poole WJ, Lloyd DJ. Electrical Resistivity Studies on the Precipitation Behaviour of AA6111 Materials Science Forum. 995-1000. DOI: 10.4028/Www.Scientific.Net/Msf.331-337.995 |
0.676 |
|
2000 |
Deschamps A, Esmaeili S, Poole WJ, Militzer M. Strain hardening rate in relation to microstructure in precipitation hardening materials Journal De Physique Iv. 10. DOI: 10.1051/Jp4:2000626 |
0.734 |
|
2000 |
Poole WJ, Sæter JA, Skjervold S, Waterloo G. A model for predicting the effect of deformation after solution treatment on the subsequent artificial aging behavior of AA7030 and AA7108 alloys Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 31: 2327-2338. DOI: 10.1007/S11661-000-0148-5 |
0.52 |
|
1999 |
Ziv I, Weinberg F, Poole WJ. The shear strength of alumina/aluminum alloy interfaces Scripta Materialia. 40: 1243-1248. DOI: 10.1016/S1359-6462(99)00119-0 |
0.538 |
|
1998 |
Poole WJ, Dowdle EJ. Experimental measurements of damage evolution in Al-Si eutectic alloys Scripta Materialia. 39: 1281-1287. DOI: 10.1016/S1359-6462(98)00326-1 |
0.428 |
|
1998 |
Poole WJ, Weinberg F. Observations of the columnar-to-equiaxed transition in stainless steels Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 29: 855-861. DOI: 10.1007/S11661-998-0276-X |
0.394 |
|
1998 |
Militzer M, Poole WJ, Sun W. Precipitation hardening of HSLA steels Steel Research. 69: 279-285. DOI: 10.1002/Srin.199805550 |
0.507 |
|
1997 |
Poole WJ, Shercliff HR, Castillo T. Process model for two step age hardening of 7475 aluminium alloy Materials Science and Technology. 13: 897-904. DOI: 10.1179/Mst.1997.13.11.897 |
0.538 |
|
1997 |
Poole WJ, Lloyd DJ, Embury JD. The effect of natural ageing on the evolution of yield strength during artificial ageing for Al-Mg-Si-Cu alloys Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 306-309. DOI: 10.1016/S0921-5093(97)00192-5 |
0.463 |
|
1996 |
Poole WJ, Shercliff HR. The Effect of Deformation Prior to Artificial Ageing on the Ageing Characteristics of a 7475 Aluminum Alloy Materials Science Forum. 1287-1292. DOI: 10.4028/Www.Scientific.Net/Msf.217-222.1287 |
0.509 |
|
1996 |
Poole WJ, Ashby MF, Fleck NA. Micro-hardness of annealed and work-hardened copper polycrystals Scripta Materialia. 34: 559-564. DOI: 10.1016/1359-6462(95)00524-2 |
0.434 |
|
1994 |
Poole WJ, Embury JD, Macewen S, Kocks UF. Large strain deformation of a copper-tungsten composite system. II: Applications Philosophical Magazine. 69: 667-687. DOI: 10.1080/01418619408242510 |
0.368 |
|
1994 |
Poole WJ, Embury JD, Macewen S, Kocks UF. Large strain deformation of a copper—tungsten composite system. I. Strain distributions Philosophical Magazine. 69: 645-665. DOI: 10.1080/01418619408242509 |
0.376 |
|
1993 |
Poole WJ, Embury JD. Investigations of High Strain Deformation Using Model Composite Systems Solid State Phenomena. 217-232. DOI: 10.4028/Www.Scientific.Net/Ssp.35-36.217 |
0.367 |
|
1993 |
Poole WJ, Silvetti SP, Embury JD, Kocks UF. On recrystallization in metal matrix composites Materials Science Forum. 551-556. DOI: 10.4028/Www.Scientific.Net/Msf.113-115.551 |
0.388 |
|
Show low-probability matches. |