Year |
Citation |
Score |
2020 |
Pipíška T, Pařil P, Čermák P, Dömény J, Král P, Kamke F. Effect of chemical and thermal modification, and material replacement on strand board properties European Journal of Wood and Wood Products. 78: 565-575. DOI: 10.1007/S00107-020-01527-8 |
0.372 |
|
2019 |
McKinley P, Sinha A, Kamke FA. Understanding the effect of weathering on adhesive bonds for wood composites using digital image correlation (DIC) Holzforschung. 73: 155-164. DOI: 10.1515/Hf-2018-0024 |
0.351 |
|
2018 |
Ching DJ, Kamke FA, Bay BK. Methodology for comparing wood adhesive bond load transfer using digital volume correlation Wood Science and Technology. 52: 1569-1587. DOI: 10.1007/S00226-018-1048-4 |
0.337 |
|
2018 |
Laleicke PF, Kamke FA. A capacitive multi-wavelength sensor for moisture content gradient sensing in wood Wood Science and Technology. 52: 717-732. DOI: 10.1007/S00226-018-0988-Z |
0.741 |
|
2018 |
Liu H, Shang J, Kamke FA, Guo K. Bonding performance and mechanism of thermal-hydro-mechanical modified veneer Wood Science and Technology. 52: 343-363. DOI: 10.1007/S00226-017-0982-X |
0.354 |
|
2017 |
Vnučec D, Žigon J, Mikuljan M, Kamke FA, Šernek M, Kutnar A, Goršek A. Bonding of densified beech wood using adhesives based on thermally modified soy proteins European Journal of Wood and Wood Products. 75: 767-776. DOI: 10.1007/S00107-017-1164-0 |
0.698 |
|
2016 |
Schwarzkopf M, Muszyński L, Paris J, Nairn J, Kamke F. Integrating optical measurement and modelling for quantitative analysis of the micromechanical load transfer in the wood-adhesive bond interphase International Wood Products Journal. 7: 231-234. DOI: 10.1080/20426445.2016.1204515 |
0.619 |
|
2016 |
Kariz M, Kuzman MK, Sernek M, Hughes M, Rautkari L, Kamke FA, Kutnar A. Influence of temperature of thermal treatment on surface densification of spruce European Journal of Wood and Wood Products. 1-11. DOI: 10.1007/S00107-016-1052-Z |
0.692 |
|
2016 |
Dixon PG, Semple KE, Kutnar A, Kamke FA, Smith GD, Gibson LJ. Comparison of the flexural behavior of natural and thermo-hydro-mechanically densified Moso bamboo European Journal of Wood and Wood Products. 1-10. DOI: 10.1007/S00107-016-1047-9 |
0.392 |
|
2015 |
Paris JL, Kamke FA. Quantitative wood-adhesive penetration with X-ray computed tomography International Journal of Adhesion and Adhesives. 61: 71-80. DOI: 10.1016/J.Ijadhadh.2015.05.006 |
0.334 |
|
2015 |
Freitag C, Kamke FA, Morrell JJ. Resistance of resin-impregnated VTC processed hybrid-poplar to fungal attack International Biodeterioration and Biodegradation. 99: 174-176. DOI: 10.1016/J.Ibiod.2014.09.013 |
0.32 |
|
2015 |
Paris JL, Kamke FA, Xiao X. X-ray computed tomography of wood-adhesive bondlines: attenuation and phase-contrast effects Wood Science and Technology. 49: 1185-1208. DOI: 10.1007/S00226-015-0750-8 |
0.304 |
|
2015 |
Semple KE, Vnu?ec D, Kutnar A, Kamke FA, Mikuljan M, Smith GD. Bonding of THM modified Moso bamboo (Phyllostachys pubescens Mazel) using modified soybean protein isolate (SPI) based adhesives European Journal of Wood and Wood Products. DOI: 10.1007/S00107-015-0938-5 |
0.369 |
|
2014 |
Kamke FA, Kutnar A. Comparison of transverse compression creep of Pseudotsuga menziesii and Populus sp. in high-temperature steam environments Wood Material Science and Engineering. 9: 84-91. DOI: 10.1080/17480272.2014.887775 |
0.339 |
|
2014 |
Paris JL, Kamke FA, Mbachu R, Gibson SK. Phenol formaldehyde adhesives formulated for advanced X-ray imaging in wood-composite bondlines Journal of Materials Science. 49: 580-591. DOI: 10.1007/S10853-013-7738-2 |
0.338 |
|
2014 |
Edalat H, Faezipour M, Thole V, Kamke FA. A new quantitative method for evaluation of adhesive penetration pattern in particulate wood-based composites: Elemental counting method Wood Science and Technology. 48: 703-712. DOI: 10.1007/S00226-014-0635-2 |
0.4 |
|
2014 |
Liu H, Shang J, Chen X, Kamke FA, Guo K. The influence of thermal-hydro-mechanical processing on chemical characterization of Tsuga heterophylla Wood Science and Technology. 48: 373-392. DOI: 10.1007/S00226-013-0608-X |
0.34 |
|
2014 |
Antikainen T, Paajanen O, Rautkari L, Kutnar A, Kamke FA, Hughes M. Simultaneous drying and densification of silver birch (Betula pendula L.) veneers: Analysis of morphology, thickness swelling, and density profile Wood Science and Technology. 48: 325-336. DOI: 10.1007/S00226-013-0605-0 |
0.353 |
|
2013 |
Lesar B, Humar M, Kamke FA, Kutnar A. Influence of the thermo-hydro-mechanical treatments of wood on the performance against wood-degrading fungi Wood Science and Technology. 47: 977-992. DOI: 10.1007/S00226-013-0553-8 |
0.356 |
|
2013 |
Standfest G, Kutnar A, Plank B, Petutschnigg A, Kamke FA, Dunky M. Microstructure of viscoelastic thermal compressed (VTC) wood using computed microtomography Wood Science and Technology. 47: 121-139. DOI: 10.1007/S00226-012-0496-5 |
0.324 |
|
2013 |
Ugovšek A, Kamke FA, Sernek M, Kutnar A. Bending performance of 3-layer beech (Fagus sylvativa L.) and Norway spruce (Picea abies (L.) Karst.) VTC composites bonded with phenol-formaldehyde adhesive and liquefied wood European Journal of Wood and Wood Products. 71: 507-514. DOI: 10.1007/S00107-013-0704-5 |
0.705 |
|
2013 |
Kutnar A, Kamke FA. Transverse compression behavior of Douglas-fir (Pseudotsuga menziesii) in saturated steam environment European Journal of Wood and Wood Products. 71: 443-449. DOI: 10.1007/S00107-013-0698-Z |
0.331 |
|
2013 |
Ugovšek A, Kamke FA, Sernek M, Pavlič M, Kutnar A. Erratum to: The wettability and bonding performance of densified VTC beech (Fagus sylvatica L.) and Norway spruce (Picea abies (L.) Karst.) bonded with phenol–formaldehyde adhesive and liquefied wood European Journal of Wood and Wood Products. 71: 371-379. DOI: 10.1007/S00107-013-0681-8 |
0.694 |
|
2013 |
Aleš U, Kamke FA, Sernek M, Pavlič M, Kutnar A. The wettability and bonding performance of densified VTC beech (Fagus sylvatica L.) and Norway spruce (Picea abies (L.) Karst.) bonded with phenol-formaldehyde adhesive and liquefied wood European Journal of Wood and Wood Products. 71: 371-379. DOI: 10.1007/s00107-013-0669-4 |
0.674 |
|
2013 |
Liu H, Kamke FA, Guo K. Integrated drying and thermo-hydro-mechanical modification of western hemlock veneer European Journal of Wood and Wood Products. 71: 173-181. DOI: 10.1007/S00107-012-0660-5 |
0.39 |
|
2012 |
Kutnar A, Kamke FA. Influence of temperature and steam environment on set recovery of compressive deformation of wood Wood Science and Technology. 46: 953-964. DOI: 10.1007/S00226-011-0456-5 |
0.33 |
|
2012 |
Kutnar A, Kamke FA. Compression of wood under saturated steam, superheated steam, and transient conditions at 150°C, 160°C, and 170°C Wood Science and Technology. 46: 73-88. DOI: 10.1007/S00226-010-0380-0 |
0.362 |
|
2011 |
Shu J, Watson LT, Ramakrishnan N, Kamke FA, Deshpande S. Computational steering in the problem solving environment WBCSim Engineering Computations (Swansea, Wales). 28: 888-911. DOI: 10.1108/02644401111165121 |
0.319 |
|
2011 |
Kamke FA, Kutnar A. Influence of stress level on compression deformation of wood in 170°c transient steam conditions Wood Material Science and Engineering. 6: 105-111. DOI: 10.1080/17480272.2010.535907 |
0.323 |
|
2011 |
Deshpande S, Watson LT, Shu J, Kamke FA, Ramakrishnan N. Data driven surrogate-based optimization in the problem solving environment WBCSim Engineering With Computers. 27: 211-223. DOI: 10.1007/S00366-010-0192-8 |
0.301 |
|
2011 |
Rautkari L, Kamke FA, Hughes M. Density profile relation to hardness of viscoelastic thermal compressed (VTC) wood composite Wood Science and Technology. 45: 693-705. DOI: 10.1007/S00226-010-0400-0 |
0.388 |
|
2011 |
Ahmad M, Kamke FA. Properties of parallel strand lumber from Calcutta bamboo (Dendrocalamus strictus) Wood Science and Technology. 45: 63-72. DOI: 10.1007/S00226-010-0308-8 |
0.694 |
|
2011 |
Modzel G, Kamke FA, De Carlo F. Comparative analysis of a wood: Adhesive bondline Wood Science and Technology. 45: 147-158. DOI: 10.1007/S00226-010-0304-Z |
0.313 |
|
2011 |
Kamke FA, Rathi VM. Apparatus for viscoelastic thermal compression of wood European Journal of Wood and Wood Products. 69: 483-487. DOI: 10.1007/S00107-010-0461-7 |
0.338 |
|
2011 |
Kutnar A, Humar M, Kamke FA, Sernek M. Fungal decay of viscoelastic thermal compressed (VTC) wood European Journal of Wood and Wood Products. 69: 325-328. DOI: 10.1007/S00107-010-0432-Z |
0.665 |
|
2011 |
Rautkari L, Kamke FA, Hughes M. Potential error in density profile measurements for wood composites European Journal of Wood and Wood Products. 69: 167-169. DOI: 10.1007/S00107-010-0419-9 |
0.316 |
|
2011 |
Kutnar A, Kamke FA, Sernek M. Densified wood as raw material for polymer composites Encyclopedia of Polymer Composites: Properties,Performance and Applications. 1103-1112. |
0.696 |
|
2010 |
Gabrielli CP, Kamke FA. Phenol-formaldehyde impregnation of densified wood for improved dimensional stability Wood Science and Technology. 44: 95-104. DOI: 10.1007/S00226-009-0253-6 |
0.306 |
|
2010 |
Kutnar A, Kamke FA. Densified wood for green composites Green Composites: Properties, Design and Life Cycle Assessment. 199-206. |
0.306 |
|
2009 |
Kutnar A, Kamke FA, Sernek M. Density profile and morphology of viscoelastic thermal compressed wood Wood Science and Technology. 43: 57-68. DOI: 10.1007/S00226-008-0198-1 |
0.7 |
|
2008 |
Kutnar A, Kamke FA, Petrič M, Sernek M. The influence of viscoelastic thermal compression on the chemistry and surface energetics of wood Colloids and Surfaces a: Physicochemical and Engineering Aspects. 329: 82-86. DOI: 10.1016/J.Colsurfa.2008.06.047 |
0.682 |
|
2008 |
Shu J, Watson LT, Ramakrishnan N, Kamke FA, North CL. Unification of problem solving environment implementation layers with XML-based specifications Advances in Engineering Software. 39: 189-201. DOI: 10.1016/J.Advengsoft.2007.02.005 |
0.342 |
|
2008 |
Kutnar A, Kamke FA, Sernek M. The mechanical properties of densified VTC wood relevant for structural composites Holz Als Roh - Und Werkstoff. 66: 439-446. DOI: 10.1007/S00107-008-0259-Z |
0.717 |
|
2008 |
Kutnar A, Kamke FA, Nairn JA, Sernek M. Mode II fracture behavior of bonded viscoelastic thermal compressed wood Wood and Fiber Science. 40: 362-373. |
0.646 |
|
2007 |
Lee JN, Kamke FA, Watson LT. Simulation of the hot-pressing of a multi-layered wood strand composite Journal of Composite Materials. 41: 879-904. DOI: 10.1177/0021998306067071 |
0.412 |
|
2007 |
Sernek M, Kamke FA. Application of dielectric analysis for monitoring the cure process of phenol formaldehyde adhesive International Journal of Adhesion and Adhesives. 27: 562-567. DOI: 10.1016/J.Ijadhadh.2006.10.004 |
0.701 |
|
2007 |
Kutnar A, Šernek M, Kamke FA. Viscoelastic thermal compression (VTC) of wood 18th International Scientific Conference: New Technologies and Materials in Industries Based On the Forestry Sector, Proceedings. 73-76. |
0.305 |
|
2006 |
Kamke FA. Densified radiata pine for structural composites Maderas: Ciencia Y Tecnologia. 8: 83-92. DOI: 10.4067/S0718-221X2006000200002 |
0.43 |
|
2006 |
Shu J, Watson LT, Zombori BG, Kamke FA. WBCSim: An environment for modeling wood-based composites manufacture Engineering With Computers. 21: 259-271. DOI: 10.1007/S00366-006-0010-5 |
0.76 |
|
2005 |
Ahmad M, Kamke FA. Analysis of Calcutta bamboo for structural composite materials: Physical and mechanical properties Wood Science and Technology. 39: 448-459. DOI: 10.1007/S00226-005-0016-Y |
0.672 |
|
2004 |
Šernek M, Kamke FA, Glasser WG. Comparative analysis of inactivated wood surface Holzforschung. 58: 22-31. DOI: 10.1515/Hf.2004.004 |
0.744 |
|
2004 |
Shu J, Watson LT, Ramakrishnan N, Kamke FA, Zombori BG. An experiment management component for the WBCSim problem solving environment Advances in Engineering Software. 35: 115-123. DOI: 10.1016/J.Advengsoft.2003.09.002 |
0.75 |
|
2004 |
Zombori BG, Kamke FA, Watson LT. Sensitivity analysis of internal mat environment during hot-pressing Wood and Fiber Science. 36: 195-209. |
0.77 |
|
2003 |
Ahmad M, Kamke FA. Analysis of Calcutta bamboo for structural composite materials: Surface characteristics Wood Science and Technology. 37: 233-240. DOI: 10.1007/S00226-003-0172-X |
0.681 |
|
2003 |
Zombori BG, Kamke FA, Watson LT. Simulation of the internal conditions during the hot-pressing process Wood and Fiber Science. 35: 2-23. |
0.769 |
|
2001 |
Zombori BG, Kamke FA, Watson LT. Simulation of the mat formation process Wood and Fiber Science. 33: 564-579. |
0.77 |
|
2001 |
Lenth CA, Kamke FA. Moisture dependent softening behavior of wood Wood and Fiber Science. 33: 492-507. |
0.776 |
|
1999 |
Goel A, Phanouriou C, Kamke FA, Ribbens CJ, Shaffer CA, Watson LT. WBCSim: A prototype problem solving environment for wood-based composites simulations Engineering With Computers. 15: 198-210. DOI: 10.1007/S003660050014 |
0.359 |
|
1999 |
Sernek M, Resnik J, Kamke FA. Penetration of liquid urea-formaldehyde adhesive into beech wood Wood and Fiber Science. 31: 41-48. |
0.659 |
|
1996 |
Lenth CA, Kamke FA. Investigations of flakeboard mat consolidation. Part II. Modeling mat consolidation using theories of cellular materials Wood and Fiber Science. 28: 309-319. |
0.764 |
|
1996 |
Lenth CA, Kamke FA. Investigations of flakeboard mat consolidation. Part I. Characterizing the cellular structure Wood and Fiber Science. 28: 153-167. |
0.76 |
|
1996 |
Kamke FA, Lenth CA, Saunders HG. Measurement of resin and wax distribution on wood flakes Forest Products Journal. 46: 63-68. |
0.765 |
|
1992 |
Johnson SE, Kamke FA. Quantitative Analysis of Gross Adhesive Penetration in Wood Using Fluorescence Microscopy The Journal of Adhesion. 40: 47-61. DOI: 10.1080/00218469208030470 |
0.321 |
|
1991 |
Wang JZ, Dillard DA, Kamke FA. Transient moisture effects in materials Journal of Materials Science. 26: 5113-5126. DOI: 10.1007/Bf01143201 |
0.372 |
|
1991 |
Kamke FA, Wolcott MP. Fundamentals of flakeboard manufacture: wood-moisture relationships Wood Science and Technology. 25: 57-71. DOI: 10.1007/Bf00195557 |
0.594 |
|
1990 |
Wang JZ, Dillard DA, Wolcott MP, Kamke FA, Wilkes GL. Transient Moisture Effects in Fibers and Composite Materials Journal of Composite Materials. 24: 994-1009. DOI: 10.1177/002199839002400906 |
0.357 |
|
1989 |
Wolcott MP, Kasal B, Kamke FA, Dillard DA. Modeling wood as a polymeric foam: an application to wood-based composite manufacture American Society of Mechanical Engineers, Applied Mechanics Division, Amd. 99: 53-60. |
0.595 |
|
Low-probability matches (unlikely to be authored by this person) |
2011 |
Modzel G, Kamke FA, Carlo FD. Erratum to: Comparative analysis of a wood-adhesive bondline Wood Science and Technology. 45: 159-159. DOI: 10.1007/S00226-010-0354-2 |
0.299 |
|
2018 |
Way D, Sinha A, Kamke FA. Laboratory and Outdoor Weathering of Wood-Composite I-Joists Journal of Materials in Civil Engineering. 30: 04018148. DOI: 10.1061/(Asce)Mt.1943-5533.0002327 |
0.298 |
|
2020 |
Bakar BFA, Kamke FA. Comparison of alkali treatments on selected chemical, physical and mechanical properties of grape cane fibers Cellulose. 27: 7371-7387. DOI: 10.1007/S10570-020-03299-Z |
0.285 |
|
1986 |
Kamke FA, Wilson JB. COMPUTER SIMULATION OF A ROTARY DRYER. PART I: RETENTION TIME Aiche Journal. 32: 263-268. DOI: 10.1002/Aic.690320213 |
0.284 |
|
2018 |
Way D, Kamke FA, Sinha A. Influence of specimen size during accelerated weathering of wood-based structural panels Wood Material Science & Engineering. 15: 17-29. DOI: 10.1080/17480272.2018.1459836 |
0.281 |
|
2016 |
Way D, Sinha A, Kamke FA, Fujii JS. Evaluation of a Wood-Strand Molded Core Sandwich Panel Journal of Materials in Civil Engineering. 28: 04016074. DOI: 10.1061/(Asce)Mt.1943-5533.0001589 |
0.28 |
|
1986 |
Kamke FA, Wilson JB. COMPUTER SIMULATION OF A ROTARY DRYER. PART II: HEAT AND MASS TRANSFER Aiche Journal. 32: 269-275. DOI: 10.1002/Aic.690320214 |
0.278 |
|
1994 |
Hartley ID, Peemoeller H, Kamke FA. Absolute Moisture Content Determination of Aspen Wood Below the Fiber Saturation Point using Pulsed NMR Holzforschung. 48: 474-479. DOI: 10.1515/Hfsg.1994.48.6.474 |
0.271 |
|
2020 |
Way D, Kamke FA, Sinha A. Moisture Transport in Wood-Based Structural Panels under Transient Hygroscopic Conditions Forest Products Journal. 70: 283-292. DOI: 10.13073/Fpj-D-20-00012 |
0.27 |
|
1989 |
Kamke FA, Zylkowski SC. Effects of wood-based panel characteristics on thermal conductivity Forest Products Journal. 39: 19-24. |
0.268 |
|
2020 |
Way D, Sinha A, Kamke FA. Performance of Light-Frame Timber Shear Walls Produced with Weathered Sheathing Journal of Architectural Engineering. 26: 4019022. DOI: 10.1061/(Asce)Ae.1943-5568.0000379 |
0.267 |
|
2014 |
Kamke FA, Nairn JA, Muszynski L, Paris JL, Schwarzkopf M, Xiao X. Methodology for micromechanical analysis of wood adhesive bonds using X-ray computed tomography and numerical modeling Wood and Fiber Science. 46: 15-28. |
0.261 |
|
1990 |
Li M, Wolcott MP, Kamke FA, Dillard DA. Small specimen compression testing in a pressurized steam environment Experimental Techniques. 14: 17-19. DOI: 10.1111/J.1747-1567.1990.Tb01094.X |
0.258 |
|
2010 |
Rautkari L, Kutnar A, Hughes M, Kamke FA. Wood surface densification using different methods 11th World Conference On Timber Engineering 2010, Wcte 2010. 4: 3121-3125. |
0.256 |
|
2018 |
McKinley P, Kamke FA, Sinha A, Andrade VD, Jakes JE. Analysis of Adhesive Penetration into Wood using Nano-X-ray Computed Tomography Wood and Fiber Science. 50: 66-76. DOI: 10.22382/Wfs-2018-007 |
0.251 |
|
1992 |
Hartley ID, Kamke FA, Peemoeller H. Cluster theory for water sorption in wood Wood Science and Technology. 26: 83-99. DOI: 10.1007/Bf00194465 |
0.251 |
|
2015 |
Scouse A, Kamke FA, Morrell JJ. Potential for using essential oils to protect viscoelastic thermal compression-treated hybrid poplar Forest Products Journal. 65: 93-99. DOI: 10.13073/Fpj-D-14-00078 |
0.24 |
|
1990 |
Kamke FA, Wolcott MP. Moisture content of wood particles during hot-pressing Proceedings of the Washington State University International Particleboard/Composite Materials Series Symposium. 262-263. |
0.239 |
|
2007 |
Kamke FA, Lee JN. Adhesive penetration in wood - A review Wood and Fiber Science. 39: 205-220. |
0.238 |
|
2006 |
Kamke FA, Watson LT, Lee JN, Shu J. A Web-based problem solving environment for the wood-based composites industry Forest Products Journal. 56: 26-32. |
0.236 |
|
1985 |
Kamke FA, Wilson JB. ANALYSIS OF A ROTARY DRYER: DRYING OF WOOD PARTICLES Forest Products Journal. 35: 32-40. |
0.219 |
|
1988 |
Brady DE, Kamke FA. Effects of hot-pressing parameters on resin penetration Forest Products Journal. 38: 63-68. |
0.217 |
|
2005 |
Hood JP, Kamke FA, Fuller J. Permeability of oriented strandboard mats Forest Products Journal. 55: 194-199. |
0.216 |
|
2010 |
Kamke FA, Kutnar A. Transverse compression behavior of wood in saturated steam at 150-170°C Wood and Fiber Science. 42: 377-387. |
0.213 |
|
1984 |
Kamke FA. MODELING THE ROTARY DRYING PROCESS Annual Meeting - American Institute of Chemical Engineers. |
0.213 |
|
1988 |
Kamke FA, Casey LJ. FUNDAMENTALS OF FLAKEBOARD MANUFACTURE: INTERNAL-MAT CONDITIONS Forest Products Journal. 38: 38-44. |
0.206 |
|
1997 |
Resnik J, Šernek M, Kamke FA. High-frequency heating of wood with moisture content gradient Wood and Fiber Science. 29: 264-271. |
0.196 |
|
2016 |
McKinley PE, Ching DJ, Kamke FA, Zauner M, Xiao X. Micro X-Ray computed tomography of adhesive bonds in wood Wood and Fiber Science. 48: 2-16. |
0.196 |
|
2011 |
Macias N, Knowles C, Kamke F, Kutnar A. Commercialization potential of viscoelastic thermal compressed wood: Insights from the us forest products industry Forest Products Journal. 61: 500-509. |
0.192 |
|
2008 |
Gabrielli C, Kamke FA. Treatment of chemically modified wood with VTC process to improve dimensional stability Forest Products Journal. 58: 82-86. |
0.191 |
|
2010 |
Kutnar A, Rautkari L, Kamke FA. Compressive creep of wood at high strain levels and variable moisture condition 11th World Conference On Timber Engineering 2010, Wcte 2010. 2: 1571-1575. |
0.186 |
|
2006 |
Jennings JD, Zink-Sharp A, Frazier CE, Kamke FA. Properties of compression-densified wood, part II: Surface energy Journal of Adhesion Science and Technology. 20: 335-344. DOI: 10.1163/156856106776381802 |
0.17 |
|
2005 |
Grigsby WJ, Thumm A, Kamke FA. Determination of resin distribution and coverage in MDF by fiber staining Wood and Fiber Science. 37: 258-269. |
0.164 |
|
1988 |
Kamke FA, Casey LJ. GAS PRESSURE AND TEMPERATURE IN THE MAT DURING FLAKEBOARD MANUFACTURE Forest Products Journal. 38: 41-43. |
0.161 |
|
1996 |
Saunders HG, Kamke FA. Quantifying emulsified wax distribution on wood flakes Forest Products Journal. 46: 56-62. |
0.153 |
|
2005 |
Jennings JD, Zink-Sharp A, Kamke FA, Frazier CE. Properties of compression densified wood. Part I: Bond performance Journal of Adhesion Science and Technology. 19: 1249-1261. DOI: 10.1163/156856105774429055 |
0.15 |
|
2021 |
Bakar BFA, Kamke FA. Alkali Concentration and Diluent Effects on Properties of Grape Cane Fiber-Reinforced Polymer Composites. Polymers. 13. PMID 34883559 DOI: 10.3390/polym13234055 |
0.144 |
|
2009 |
Vidrine C, Kamke F, Preston A, Morrell JJ. The effects of copper-based preservative technologies on the resistance of aspen strandboards to biological degradation Wood and Fiber Science. 41: 211-219. |
0.11 |
|
Hide low-probability matches. |