| Year |
Citation |
Score |
| 2019 |
Sun Y, Bai X, Klenosky D, Trumble K, Johnson D. A Study on Peripheral Grain Structure Evolution of an AA7050 Aluminum Alloy with a Laboratory-Scale Extrusion Setup Journal of Materials Engineering and Performance. 28: 5156-5164. DOI: 10.1007/S11665-019-04208-7 |
0.396 |
|
| 2018 |
Sagapuram D, Viswanathan K, Trumble KP, Chandrasekar S. A common mechanism for evolution of single shear bands in large-strain deformation of metals Philosophical Magazine. 98: 3267-3299. DOI: 10.1080/14786435.2018.1524586 |
0.721 |
|
| 2018 |
Kustas AB, Johnson DR, Trumble KP, Chandrasekar S. Enhancing workability in sheet production of high silicon content electrical steel through large shear deformation Journal of Materials Processing Technology. 257: 155-162. DOI: 10.1016/J.Jmatprotec.2018.02.027 |
0.481 |
|
| 2017 |
Dehestani M, Trumble K, Wang H, Wang H, Stanciu LA. Effects of microstructure and heat treatment on mechanical properties and corrosion behavior of powder metallurgy derived Fe–30Mn alloy Materials Science and Engineering: A. 703: 214-226. DOI: 10.1016/J.Msea.2017.07.054 |
0.402 |
|
| 2017 |
Sun Y, Johnson DR, Trumble KP. Effect of Zr on recrystallization in a directionally solidified AA7050 Materials Science and Engineering: A. 700: 358-365. DOI: 10.1016/J.Msea.2017.06.026 |
0.387 |
|
| 2016 |
Sagapuram D, Viswanathan K, Mahato A, Sundaram NK, M'Saoubi R, Trumble KP, Chandrasekar S. Geometric flow control of shear bands by suppression of viscous sliding. Proceedings. Mathematical, Physical, and Engineering Sciences / the Royal Society. 472: 20160167. PMID 27616920 DOI: 10.1098/Rspa.2016.0167 |
0.71 |
|
| 2016 |
Kustas AB, Chandrasekar S, Trumble KP. Magnetic properties characterization of shear-textured 4 wt% Si electrical steel sheet Journal of Materials Research. 31: 3930-3938. DOI: 10.1557/Jmr.2016.458 |
0.306 |
|
| 2016 |
Sagapuram D, Efe M, Trumble KP, Chandrasekar S. Flow transitions and flow localization in large-strain deformation of magnesium alloy Materials Science and Engineering A. 659: 295-305. DOI: 10.1016/J.Msea.2016.02.054 |
0.731 |
|
| 2016 |
Johnson DR, McCleary C, Krane MJM, Trumble KP. Measuring thermomechanical properties of AA7050 near the solidus temperature International Journal of Metalcasting. 10: 147-156. DOI: 10.1007/S40962-015-0016-0 |
0.369 |
|
| 2016 |
Kustas AB, Sagapuram D, Trumble KP, Chandrasekar S. Texture Development in High-Silicon Iron Sheet Produced by Simple Shear Deformation Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 47: 3095-3108. DOI: 10.1007/S11661-016-3437-3 |
0.77 |
|
| 2016 |
Klenosky DR, Johnson DR, Trumble KP. Application of secondary shear effects in the extrusion machining process to explore recrystallization mechanics during conventional extrusion of 7050 aluminum Tms Light Metals. 2016: 219-224. |
0.323 |
|
| 2015 |
Kustas AB, Sagapuram D, Chandrasekar S, Trumble KP. Deformation and recrystallization texture development in Fe-4%Si subjected to large shear deformation Iop Conference Series: Materials Science and Engineering. 82. DOI: 10.1088/1757-899X/82/1/012054 |
0.744 |
|
| 2015 |
Sagapuram D, Yeung H, Guo Y, Mahato A, M'Saoubi R, Compton WD, Trumble KP, Chandrasekar S. On control of flow instabilities in cutting of metals Cirp Annals - Manufacturing Technology. 64: 49-52. DOI: 10.1016/J.Cirp.2015.04.059 |
0.714 |
|
| 2015 |
Wang Y, Krane MJM, Trumble KP. Thermal stress prediction in AA5182 rectangular ingots Tms Light Metals. 2015: 865-870. DOI: 10.1002/9781119093435.Ch145 |
0.366 |
|
| 2014 |
Guo Y, Sagapuram D, Mahato A, M'Saoubi R, Trumble KP, Chandrasekar S. Understanding deformation on machined surfaces Asme 2014 International Manufacturing Science and Engineering Conference, Msec 2014 Collocated With the Jsme 2014 International Conference On Materials and Processing and the 42nd North American Manufacturing Research Conference. 1. DOI: 10.1115/MSEC2014-4003 |
0.692 |
|
| 2014 |
Sagapuram D, Efe M, Trumble KP, Chandrasekar S. Enabling shear textures and fine-grained structures in Magnesium sheet by machining-based deformation processing Iop Conference Series: Materials Science and Engineering. 63. DOI: 10.1088/1757-899X/63/1/012155 |
0.742 |
|
| 2014 |
Lortrakul P, Trice RW, Trumble KP, Dayananda MA. Investigation of the mechanisms of Type-II hot corrosion of superalloy CMSX-4 Corrosion Science. 80: 408-415. DOI: 10.1016/J.Corsci.2013.11.048 |
0.702 |
|
| 2014 |
Chaput K, Trumble KP. Structure and Properties of Cast Near-Congruent Copper-Manganese Alloys Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 45: 1793-1803. DOI: 10.1007/S11663-014-0080-5 |
0.439 |
|
| 2014 |
Sagapuram D, Efe M, Moscoso W, Chandrasekar S, Trumble KP. Non-Basal Textures in Magnesium Alloy Strips Produced by Extrusion Machining Essential Readings in Magnesium Technology. 395-399. DOI: 10.1002/9781118859803.ch63 |
0.738 |
|
| 2013 |
Swaminathan K, Blendell JE, Trumble KP. Effect of crystallographic orientation on subcritical grain boundary cracking in a conventionally cast polycrystalline nickel-based superalloy. Microscopy and Microanalysis : the Official Journal of Microscopy Society of America, Microbeam Analysis Society, Microscopical Society of Canada. 19: 978-87. PMID 23718929 DOI: 10.1017/S143192761300144X |
0.327 |
|
| 2013 |
Sagapuram D, Efe M, Moscoso W, Chandrasekar S, Trumble KP. Controlling texture in magnesium alloy sheet by shear-based deformation processing Acta Materialia. 61: 6843-6856. DOI: 10.1016/J.Actamat.2013.07.063 |
0.761 |
|
| 2012 |
Sagapuram D, Efe M, Moscoso W, Chandrasekar S, Trumble KP. Deformation temperature effects on microstructure and texture evolution in high strain rate extrusion-machining of Mg-AZ31B Materials Science Forum. 702: 52-55. DOI: 10.4028/Www.Scientific.Net/Msf.702-703.52 |
0.745 |
|
| 2012 |
Guo Y, Efe M, Moscoso W, Sagapuram D, Trumble KP, Chandrasekar S. Deformation field in large-strain extrusion machining and implications for deformation processing Scripta Materialia. 66: 235-238. DOI: 10.1016/J.Scriptamat.2011.10.045 |
0.75 |
|
| 2012 |
Efe M, Moscoso W, Trumble KP, Dale Compton W, Chandrasekar S. Mechanics of large strain extrusion machining and application to deformation processing of magnesium alloys Acta Materialia. 60: 2031-2042. DOI: 10.1016/J.Actamat.2012.01.018 |
0.481 |
|
| 2012 |
Sagapuram D, Efe M, Moscoso W, Chandrasekar S, Trumble KP. Non-Basal Textures in Magnesium Alloy Strips by Extrusion-Machining Magnesium Technology. 121-125. DOI: 10.1002/9781118359228.Ch23 |
0.723 |
|
| 2012 |
Sagapuram D, Efe M, Moscoso W, Chandrasekar S, Trumble KP. Non-basal textures in magnesium alloy strips produced by extrusion-machining Magnesium Technology. 121-125. |
0.736 |
|
| 2011 |
Mann JB, Chandrasekar S, Compton WD, Trumble KP, Saldana C, Swaminathan S, John GE, Moscoso W, Murthy TG. Severe plastic deformation and the production of nanostructured alloys by machining Nanostructured Metals and Alloys: Processing, Microstructure, Mechanical Properties and Applications. 178-210. DOI: 10.1533/9780857091123.1.178 |
0.369 |
|
| 2010 |
Calvert KL, Trumble KP, Webster TJ, Kirkpatrick LA. Characterization of commercial rigid polyurethane foams used as bone analogs for implant testing. Journal of Materials Science. Materials in Medicine. 21: 1453-61. PMID 20162325 DOI: 10.1007/S10856-010-4024-6 |
0.644 |
|
| 2009 |
Saldana C, Yang P, Mann JB, Moscoso W, Gill DD, Chandrasekar S, Trumble KP. Micro-scale components from high-strength nanostructured alloys Materials Science and Engineering A. 503: 172-175. DOI: 10.1016/J.Msea.2008.02.056 |
0.422 |
|
| 2009 |
Brown TL, Saldana C, Murthy TG, Mann JB, Guo Y, Allard LF, King AH, Compton WD, Trumble KP, Chandrasekar S. A study of the interactive effects of strain, strain rate and temperature in severe plastic deformation of copper Acta Materialia. 57: 5491-5500. DOI: 10.1016/J.Actamat.2009.07.052 |
0.426 |
|
| 2008 |
Murthy TG, Huang C, Shankar MR, Chandrasekar S, Trumble KP, Sullivan JP. Temperature field in severe plastic deformation at small strain rates Materials Science Forum. 584: 231-236. DOI: 10.4028/Www.Scientific.Net/Msf.584-586.231 |
0.388 |
|
| 2008 |
Iglesias P, Moscoso W, Mann JB, Saldana C, Shankar MR, Chandrasekar S, Compton WD, Trumble KP. Production analysis of new machining-based deformation processes for nanostructured materials International Journal of Material Forming. 1: 459-462. DOI: 10.1007/S12289-008-0094-0 |
0.456 |
|
| 2007 |
Mann JB, Saldana C, Chandrasekar S, Compton WD, Trumble KP. Metal particulate production by modulation-assisted machining Scripta Materialia. 57: 909-912. DOI: 10.1016/J.Scriptamat.2007.07.025 |
0.403 |
|
| 2007 |
Ravi Shankar M, Verma R, Rao BC, Chandrasekar S, Compton WD, King AH, Trumble KP. Severe plastic deformation of difficult-to-deform materials at near-ambient temperature Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 38: 1899-1905. DOI: 10.1007/S11661-007-9257-8 |
0.49 |
|
| 2007 |
Swaminathan S, Ravi Shankar M, Rao BC, Compton WD, Chandrasekar S, King AH, Trumble KP. Severe plastic deformation (SPD) and nanostructured materials by machining Journal of Materials Science. 42: 1529-1541. DOI: 10.1007/S10853-006-0745-9 |
0.478 |
|
| 2006 |
Swaminathan S, Chandrasekar S, Compton WD, King AH, Trumble KP. Large strain deformation of single-phase copper solid solutions by machining Materials Science Forum. 503: 651-656. DOI: 10.4028/Www.Scientific.Net/Msf.503-504.651 |
0.375 |
|
| 2006 |
Kim HJ, Krane MJM, Trumble KP, Bowman KJ. Analytical fluid flow models for tape casting Journal of the American Ceramic Society. 89: 2769-2775. DOI: 10.1111/J.1551-2916.2006.01163.X |
0.318 |
|
| 2005 |
Kim HJ, Trumble KP, Bowman KJ. Layered boron carbide-aluminum composites with large changes in microstructure Materials Science Forum. 492: 673-678. DOI: 10.4028/Www.Scientific.Net/Msf.492-493.673 |
0.372 |
|
| 2005 |
Swaminathan S, Ravi Shankar M, Rao BC, Brown TL, Chandrasekar S, Dale Compton W, King AH, Trumble KP. Nanostructured materials by machining American Society of Mechanical Engineers, Manufacturing Engineering Division, Med. 16: 981-985. DOI: 10.1115/IMECE2005-81242 |
0.353 |
|
| 2005 |
Swaminathan S, Ravi Shankar M, Lee S, Hwang J, King AH, Kezar RF, Rao BC, Brown TL, Chandrasekar S, Compton WD, Trumble KP. Large strain deformation and ultra-fine grained materials by machining Materials Science and Engineering A. 410: 358-363. DOI: 10.1016/J.Msea.2005.08.139 |
0.45 |
|
| 2005 |
Shao R, Krane MJM, Trumble KP. Infiltration and directional solidification of CMSX-4 through a particulate ceramic preform Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 36: 2461-2469. DOI: 10.1007/S11661-005-0120-5 |
0.609 |
|
| 2004 |
Swaminathan S, Swanson C, Brown TL, Kezar RF, Chandrasekar S, Compton WD, Trumble KP. Microstructural Refinement in Steels by Machining Mrs Proceedings. 821. DOI: 10.1557/Proc-821-P9.5 |
0.353 |
|
| 2004 |
Swaminathan S, Chandrasekar S, Compton WD, Trumble KP, King AH. Microstructural Refinement in Single-Phase Copper Solid Solutions by Machining Mrs Proceedings. 821. DOI: 10.1557/Proc-821-P8.27 |
0.395 |
|
| 2004 |
Swarainathan S, Brown TL, Shankar MR, Rao BC, Trumble KP, Compton WD, Chandrasekar S. Large scale manufacturing of ultra-fine grained materials Ultrafine Grained Materials Iii. 161-166. |
0.358 |
|
| 2004 |
Shao R, Krane MJM, Trumble KP. Directional solidification of a superalloy through a particulate ceramic preform Proceedings of the Tms Fall Extraction and Processing Conference. 2004: 269-275. |
0.537 |
|
| 2004 |
Brown TL, Swaminathan S, Rao BC, Kezar RF, Chandrasekar S, Compton WD, Trumble KP, King AH. Machining as a method for studying effects of very large strain deformation Ultrafine Grained Materials Iii. 167-172. |
0.311 |
|
| 2003 |
Hilden JL, Trumble KP. Numerical analysis of capillarity in packed spheres: planar hexagonal-packed spheres. Journal of Colloid and Interface Science. 267: 463-74. PMID 14583224 DOI: 10.1016/S0021-9797(03)00683-0 |
0.667 |
|
| 2003 |
Zhang F, Trumble KP, Bowman KJ. Functionally graded boron carbide - Aluminum composites Materials Science Forum. 423: 73-76. DOI: 10.4028/Www.Scientific.Net/Msf.423-425.73 |
0.358 |
|
| 2003 |
Agrawal P, Conlon K, Bowman KJ, Sun CT, Cichocki FR, Trumble KP. Thermal residual stresses in co-continuous composites Acta Materialia. 51: 1143-1156. DOI: 10.1016/S1359-6454(02)00519-0 |
0.656 |
|
| 2003 |
Hilden JL, Trumble KP. Capillarity modeling and experiments on investment casting mold filling Modeling of Casting, Welding and Advanced Solidification Processes. 471-478. |
0.676 |
|
| 2002 |
Brown TL, Swaminathan S, Chandrasekar S, Compton WD, King AH, Trumble KP. Low-cost manufacturing process for nanostructured metals and alloys Journal of Materials Research. 17: 2484-2488. DOI: 10.1557/Jmr.2002.0362 |
0.407 |
|
| 2002 |
Moon RJ, Hoffman M, Hilden J, Bowman K, Trumble K, Rödel J. Weight Function Analysis on the R-Curve Behavior of Multilayered Alumina-Zirconia Composites Journal of the American Ceramic Society. 85: 1505-1511. DOI: 10.1111/J.1151-2916.2002.Tb00304.X |
0.684 |
|
| 2002 |
Moon RJ, Hoffman M, Hilden J, Bowman KJ, Trumble KP, Rödel J. R-curve behavior in alumina-zirconia composites with repeating graded layers Engineering Fracture Mechanics. 69: 1647-1665. DOI: 10.1016/S0013-7944(02)00050-4 |
0.694 |
|
| 1999 |
Cichocki FR, Trumble KP. Microstructure-hardness correlation in graded, dual-scale ceramic-metal composites produced via infiltration processing Materials Science Forum. 308: 169-174. DOI: 10.4028/Www.Scientific.Net/Msf.308-311.169 |
0.692 |
|
| 1999 |
Moon RJ, Trumble KP, Bowman KJ. Thermal instability of (Bi,Pb)2Sr2Ca2Cu3Ox in contact with silver Journal of Materials Research. 14: 652-664. DOI: 10.1557/Jmr.1999.0090 |
0.319 |
|
| 1999 |
Drewry EN, Moon RJ, Bowman KJ, Trumble KP, Brehm J. Fracture behavior of centrifugally cast multilayer alumina/alumina composites Scripta Materialia. 41: 749-754. DOI: 10.1016/S1359-6462(99)00212-2 |
0.346 |
|
| 1999 |
Hilden JL, Trumble KP. Spontaneous infiltration of non-cylindrical porosity: large pores Materials Science Forum. 308: 157-162. |
0.703 |
|
| 1998 |
Cichocki FR, Trumble KP, Rödel J. Tailored porosity gradients via colloidal infiltration of compression-molded sponges Journal of the American Ceramic Society. 81: 1661-1664. DOI: 10.1111/J.1151-2916.1998.Tb02528.X |
0.667 |
|
| 1998 |
Rogers KA, Trumble KP. Effect of reduction temperature on internal reduction microstructures Scripta Materialia. 39: 103-108. DOI: 10.1016/S1359-6462(98)00130-4 |
0.308 |
|
| 1998 |
Trumble KP. Spontaneous infiltration of non-cylindrical porosity: Close-packed spheres Acta Materialia. 46: 2363-2367. DOI: 10.1016/S1359-6454(98)80017-7 |
0.355 |
|
| 1997 |
Roeder RK, Trumble KP, Bowman' KJ. Microstructure Development in Al2O3-Platelet-Reinforced Ce-ZrO2/Al2O3 Composites Journal of the American Ceramic Society. 80: 27-36. DOI: 10.1111/J.1151-2916.1997.Tb02787.X |
0.345 |
|
| 1996 |
Steinlage GA, Bowman KJ, Trumble KP. A comparison of three mechanical models for cold roll bonding metal laminates Journal of Adhesion Science and Technology. 10: 199-229. DOI: 10.1163/156856196X00355 |
0.315 |
|
| 1996 |
Gonzalez EJ, Trumble KP. Spontaneous infiltration of alumina by copper-oxygen alloys Journal of the American Ceramic Society. 79: 114-120. DOI: 10.1111/J.1151-2916.1996.Tb07888.X |
0.321 |
|
| 1995 |
Roeder RK, Bowman KJ, Trumble KP. Texture and Microstructure Development in Al2O3-Platelet Reinforced Ce-ZrO2/Al2O3 Laminates Produced by Centrifugal Consolidation Textures and Microstructures. 24: 43-52. DOI: 10.1155/Tsm.24.43 |
0.304 |
|
| 1995 |
Medendorp NW, Bowman KJ, Trumble KP. Processing with colloidal Ag particles in hot forged Ag-coated BSCCO-2223 composites Journal of Electronic Materials. 24: 1903-1905. DOI: 10.1007/Bf02653007 |
0.305 |
|
| 1994 |
Steinlage G, Roeder R, Trumble K, Bowman K, Li S, McElfresh M. Preferred orientation of BSCCO via centrifugal slip casting Journal of Materials Research. 9: 833-836. DOI: 10.1557/Jmr.1994.0833 |
0.33 |
|
| 1994 |
Rogers KA, Trumble KP, Dalgleish BJ, Reimanis IE. Role of Oxygen in Microstructure Development at Solid‐State Diffusion‐Bonded Cu/α‐Al2O3 Interfaces Journal of the American Ceramic Society. 77: 2036-2042. DOI: 10.1111/J.1151-2916.1994.Tb07094.X |
0.318 |
|
| Show low-probability matches. |
