Year |
Citation |
Score |
2019 |
Moradian M, Hu Q, Aboustait M, Ley MT, Hanan JC, Xiao X, Rose V, Winarski R, Scherer GW. Multi-scale observations of structure and chemical composition changes of portland cement systems during hydration Construction and Building Materials. 212: 486-499. DOI: 10.1016/J.Conbuildmat.2019.04.013 |
0.305 |
|
2018 |
Shabafrooz V, Bandla S, Allahkarami M, Hanan JC. Graphene/polyethylene terephthalate nanocomposites with enhanced mechanical and thermal properties Journal of Polymer Research. 25. DOI: 10.1007/S10965-018-1621-4 |
0.75 |
|
2017 |
Moradian M, Hu Q, Aboustait M, Ley MT, Hanan JC, Xiao X, Scherer GW, Zhang Z. Direct observation of void evolution during cement hydration Materials & Design. 136: 137-149. DOI: 10.1016/J.Matdes.2017.09.056 |
0.305 |
|
2017 |
Shabafrooz V, Bandla S, Hanan JC. Graphene dispersion in a surfactant-free, polar solvent Journal of Materials Science. 53: 559-572. DOI: 10.1007/S10853-017-1456-0 |
0.743 |
|
2016 |
Hu Q, Aboustait M, Kim T, Ley MT, Hanan JC, Bullard J, Winarski R, Rose V. Direct three-dimensional observation of the microstructure and chemistry of CS hydration. Cement and Concrete Research. 88: 157-169. PMID 29880979 DOI: 10.1016/J.Cemconres.2016.07.006 |
0.353 |
|
2016 |
Hu Q, Aboustait M, Kim T, Ley MT, Bullard JW, Scherer G, Hanan JC, Rose V, Winarski R, Gelb J. Direct Measurements of 3D Structure, Chemistry and Mass Density During the Induction Period of C3S Hydration. Cement and Concrete Research. 89: 14-26. PMID 28919638 DOI: 10.1016/J.Cemconres.2016.07.008 |
0.316 |
|
2016 |
Benedetti M, Fontanari V, Allahkarami M, Hanan J, Bandini M. On the combination of the critical distance theory with a multiaxial fatigue criterion for predicting the fatigue strength of notched and plain shot-peened parts International Journal of Fatigue. 93: 133-147. DOI: 10.1016/J.Ijfatigue.2016.08.015 |
0.727 |
|
2016 |
Benedetti M, Fontanari V, Winiarski B, Allahkarami M, Hanan JC. Residual stresses reconstruction in shot peened specimens containing sharp and blunt notches by experimental measurements and finite element analysis International Journal of Fatigue. 87: 102-111. DOI: 10.1016/J.Ijfatigue.2016.01.020 |
0.751 |
|
2016 |
Winiarski B, Benedetti M, Fontanari V, Allahkarami M, Hanan JC, Withers PJ. High Spatial Resolution Evaluation of Residual Stresses in Shot Peened Specimens Containing Sharp and Blunt Notches by Micro-hole Drilling, Micro-slot Cutting and Micro-X-ray Diffraction Methods Experimental Mechanics. 1-15. DOI: 10.1007/S11340-016-0182-X |
0.767 |
|
2016 |
Allahkarami M, Bandla S, Hanan JC. Residual stress in injection stretch blow molded PET bottles Conference Proceedings of the Society For Experimental Mechanics Series. 9: 285-290. DOI: 10.1007/978-3-319-21765-9_34 |
0.745 |
|
2016 |
Benedetti M, Fontanari V, Allahkarami M, Hanan JC, Winiarski B, Withers PJ. Modelling the residual stress field ahead of the notch root in shot peened v-notched samples Conference Proceedings of the Society For Experimental Mechanics Series. 9: 249-261. DOI: 10.1007/978-3-319-21765-9_31 |
0.708 |
|
2016 |
Winiarski B, Benedetti M, Fontanari V, Allahkarami M, Hanan JC, Schajer GS, Withers PJ. Comparative analysis of shot-peened residual stresses using micro-hole drilling, micro-slot cutting, X-ray diffraction methods and finite-element modelling Conference Proceedings of the Society For Experimental Mechanics Series. 9: 215-223. DOI: 10.1007/978-3-319-21765-9_27 |
0.726 |
|
2015 |
Benedetti M, Fontanari V, Winiarski B, Withers PJ, Allahkarami M, Hanan JC. Fatigue Behavior of Shot Peened Notched Specimens: Effect of the Residual Stress Field Ahead of the Notch Root Procedia Engineering. 109: 80-88. DOI: 10.1016/J.Proeng.2015.06.210 |
0.746 |
|
2015 |
Allahkarami M, Jayakumar B, Hanan JC. Residual stress of individual aluminum grains from three dimensional X-ray diffraction Conference Proceedings of the Society For Experimental Mechanics Series. 6: 123-130. DOI: 10.1007/978-3-319-06989-0_16 |
0.75 |
|
2015 |
Benedetti M, Fontanari V, Allahkarami M, Hanan JC. Notch fatigue behaviour of shot peened high-strength aluminium alloys: Role of the residual stress field ahead of the notch root Conference Proceedings of the Society For Experimental Mechanics Series. 6: 113-121. DOI: 10.1007/978-3-319-06989-0_15 |
0.716 |
|
2015 |
Jayakumar B, Allahkarami M, Hanan JC. Residual stress response to peening in metallic glass Conference Proceedings of the Society For Experimental Mechanics Series. 6: 99-104. DOI: 10.1007/978-3-319-06989-0_13 |
0.767 |
|
2014 |
Hanan JC. Birefrengent residual stress and improved injection mold design Materials Science Forum. 768: 217-223. DOI: 10.4028/Www.Scientific.Net/Msf.768-769.217 |
0.37 |
|
2014 |
Allahkarami M, Hanan JC. Three-dimensional x-ray diffraction detection and visualization Measurement Science and Technology. 25. DOI: 10.1088/0957-0233/25/5/055604 |
0.711 |
|
2014 |
Allahkarami M, Hanan JC. Residual stress and quantitative phase mapping on complex geometries Powder Diffraction. 29: 176-185. DOI: 10.1017/S0885715614000335 |
0.743 |
|
2014 |
Bandla S, Allahkarami M, Hanan JC. Out-of-plane orientation and crystallinity of biaxially stretched polyethylene terephthalate Powder Diffraction. 29: 123-126. DOI: 10.1017/S0885715614000190 |
0.72 |
|
2014 |
Hu Q, Ley MT, Davis J, Hanan JC, Frazier R, Zhang Y. 3D chemical segmentation of fly ash particles with X-ray computed tomography and electron probe microanalysis Fuel. 116: 229-236. DOI: 10.1016/J.Fuel.2013.07.037 |
0.453 |
|
2014 |
Allahkarami M, Bandla S, Winarski RP, Hanan JC. X-ray nanotomography of a nanofiber: Quantitative measurement of diameter fluctuations Applied Surface Science. 297: 9-15. DOI: 10.1016/J.Apsusc.2013.12.152 |
0.737 |
|
2014 |
Hu Q, Aboustait M, Ley MT, Hanan JC, Rose V, Winarski R. Combined three-dimensional structure and chemistry imaging with nanoscale resolution Acta Materialia. 77: 173-182. DOI: 10.1016/J.Actamat.2014.05.050 |
0.329 |
|
2014 |
Allahkarami M, Hanan JC. Residual stress and phase transformation map for impact fatigued zirconia Conference Proceedings of the Society For Experimental Mechanics Series. 8: 295-301. DOI: 10.1007/978-3-319-00876-9_36 |
0.744 |
|
2013 |
Jayakumar B, Allahkarami M, Hanan JC. Inter-cellular joining for amorphous honeycombs Conference Proceedings of the Society For Experimental Mechanics Series. 7: 25-33. DOI: 10.1007/978-1-4614-4553-1_3 |
0.719 |
|
2013 |
Allahkarami M, Hanan JC. Finite element model generation based on stochastic analysis on AFM images Conference Proceedings of the Society For Experimental Mechanics Series. 3: 417-421. DOI: 10.1007/978-1-4614-4235-6_57 |
0.705 |
|
2013 |
Allahkarami M, Hanan JC. Residual stress and phase transformation in zirconia restoration ceramics Ceramic Engineering and Science Proceedings. 33: 37-47. |
0.741 |
|
2012 |
Bonfante EA, Rafferty BT, Silva NR, Hanan JC, Rekow ED, Thompson VP, Coelho PG. Residual thermal stress simulation in three-dimensional molar crown systems: a finite element analysis. Journal of Prosthodontics : Official Journal of the American College of Prosthodontists. 21: 529-34. PMID 22672470 DOI: 10.1111/J.1532-849X.2012.00866.X |
0.409 |
|
2012 |
Zhang Y, Allahkarami M, Hanan JC. Measuring residual stress in ceramic zirconia-porcelain dental crowns by nanoindentation. Journal of the Mechanical Behavior of Biomedical Materials. 6: 120-7. PMID 22301181 DOI: 10.1016/J.Jmbbm.2011.11.006 |
0.764 |
|
2012 |
Ma J, Hanan JC, Komanduri R, Lu H. Simulation of the deformation mechanisms of bulk metallic glass (BMG) foam using the material point method Cmes - Computer Modeling in Engineering and Sciences. 86: 349-384. DOI: 10.3970/Cmes.2012.086.349 |
0.395 |
|
2012 |
Allahkarami M, Hanan JC. Residual stress delaying phase transformation in Y-TZP bio-restorations Phase Transitions. 85: 169-178. DOI: 10.1080/01411594.2011.625347 |
0.761 |
|
2012 |
Jayakumar B, Hanan JC. Modeling the axial mechanical response of amorphous Fe 45Ni 45Mo 7B 3 honeycombs Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 43: 2669-2675. DOI: 10.1007/S11661-011-0873-Y |
0.76 |
|
2011 |
Allahkarami M, Hanan JC. Mapping the tetragonal to monoclinic phase transformation in zirconia core dental crowns. Dental Materials : Official Publication of the Academy of Dental Materials. 27: 1279-84. PMID 21993015 DOI: 10.1016/J.Dental.2011.09.004 |
0.713 |
|
2011 |
Allahkarami M, Hanan JC. X-ray diffraction mapping on a curved surface Journal of Applied Crystallography. 44: 1211-1216. DOI: 10.1107/S0021889811042221 |
0.715 |
|
2011 |
Fu B, Luo H, Wang F, Churu G, Chu KT, Hanan JC, Sotiriou-Leventis C, Leventis N, Lu H. Simulation of the microstructural evolution of a polymer crosslinked templated silica aerogel under high-strain-rate compression Journal of Non-Crystalline Solids. 357: 2063-2074. DOI: 10.1016/J.Jnoncrysol.2011.02.049 |
0.412 |
|
2011 |
Allahkarami M, Bale HA, Hanan JC. Characterization of non uniform veneer layer thickness distribution on curved substrate zirconia ceramics using X-ray micro-tomography Ceramic Engineering and Science Proceedings. 32: 155-163. |
0.748 |
|
2011 |
Bale HA, Tamura N, Hanan JC. Microbeam X-ray grain averaged residual stress in dental ceramics Ceramic Engineering and Science Proceedings. 32: 49-63. |
0.343 |
|
2011 |
Zhang Y, Hanan JC. Residual stress in ceramic zirconia-porcelain crowns by nanoindentation Ceramic Engineering and Science Proceedings. 32: 67-76. |
0.323 |
|
2010 |
Bale H, Hanan JC. High residual stress between zirconia grains observed with Laue micro-diffraction Asme International Mechanical Engineering Congress and Exposition, Proceedings. 11: 217-218. DOI: 10.1115/IMECE2009-11640 |
0.325 |
|
2010 |
Allahkarami M, Hanan JC, Bale HA. Regeneration of surface roughness by the Langevin equation using stochastic analysis on AFM image of a carbon fiber Applied Surface Science. 257: 857-860. DOI: 10.1016/J.Apsusc.2010.07.081 |
0.713 |
|
2009 |
Bale H, Hanan JC, Smay JE. Thermal interface stresses including 3D microstructures in layered free-form ceramics Ceramic Engineering and Science Proceedings. 29: 3-17. |
0.345 |
|
2009 |
Bale H, Tamura N, Coelho P, Hanan JC. Impact fatigue deformation and residual stress evolution in dental ceramics Society For Experimental Mechanics - Sem Annual Conference and Exposition On Experimental and Applied Mechanics 2009. 2: 1233-1239. |
0.339 |
|
2008 |
Daphalapurkar NP, Hanan JC, Phelps NB, Bale H, Lu H. Tomography and simulation of microstructure evolution of a closed-cell polymer foam in compression Mechanics of Advanced Materials and Structures. 15: 594-611. DOI: 10.1080/15376490802470523 |
0.366 |
|
2008 |
Veazey C, Demetriou MD, Schroers J, Hanan JC, Dunning LA, Kaukler WF, Johnson WL. Foaming of amorphous metals approaches the limit of microgravity foaming Journal of Advanced Materials. 40: 7-11. |
0.679 |
|
2007 |
Demetriou MD, Schramm JP, Veazey C, Johnson WL, Hanan JC, Phelps NB. High porosity metallic glass foam: A powder metallurgy route Applied Physics Letters. 91. DOI: 10.1063/1.2799248 |
0.723 |
|
2007 |
Demetriou MD, Veazey C, Schroers J, Hanan JC, Johnson WL. Expansion evolution during foaming of amorphous metals Materials Science and Engineering A. 448: 863-867. DOI: 10.1016/J.Msea.2006.02.299 |
0.689 |
|
2007 |
Demetriou MD, Veazey C, Schroers J, Hanan JC, Johnson WL. Thermo-plastic expansion of amorphous metallic foam Journal of Alloys and Compounds. 434: 92-96. DOI: 10.1016/J.Jallcom.2006.08.323 |
0.712 |
|
2007 |
Demetriou MD, Hanan JC, Veazey C, Michiel MD, Lenoir N, Üstündag E, Johnson WL. Yielding of metallic glass foam by percolation of an elastic buckling instability Advanced Materials. 19: 1957-1962. DOI: 10.1002/Adma.200602136 |
0.803 |
|
2006 |
Bale HA, Hanan JC, Tamura N. D075 4-D XRD for strain in many grains using triangulation Powder Diffraction. 21: 184-184. DOI: 10.1154/1.2219885 |
0.37 |
|
2006 |
Hanan JC, Bale H, Chu YS, DeCarlo F. D076 Damage and interface stress in dental reconstruction materials from combined tomography and diffraction Powder Diffraction. 21: 179-179. DOI: 10.1154/1.2219857 |
0.382 |
|
2005 |
Bale H, Hanan J, Tamura N, Rogan R, Ustundag E. D044 Microbeam X-ray Strain from Matrix Grains and Fiber of Similar Scale in a Tensile Stressed Composite Powder Diffraction. 20: 180-180. DOI: 10.1154/1.1968296 |
0.812 |
|
2005 |
Hanan J, Veazey C, Demetriou M, DeCarlo F, Choo Y. C12 Microtomography of Amorphous Metallic Foam During Thermo-Plastic Expansion Powder Diffraction. 20: 176-176. DOI: 10.1154/1.1968271 |
0.701 |
|
2005 |
Aydiner CC, Üstündag E, Clausen B, Hanan JC, Winholtz RA, Bourke MAM, Peker A. Residual stresses in a bulk metallic glass-stainless steel composite Materials Science and Engineering A. 399: 107-113. DOI: 10.1016/J.Msea.2005.02.031 |
0.826 |
|
2005 |
Hanan JC, Mahesh S, Üstündag E, Beyerlein IJ, Swift GA, Clausen B, Brown DW, Bourke MAM. Strain evolution after fiber failure in a single-fiber metal matrix composite under cyclic loading Materials Science and Engineering A. 399: 33-42. DOI: 10.1016/J.Msea.2005.02.018 |
0.806 |
|
2004 |
Mahesh S, Hanan JC, Üstündag E, Beyerlein IJ. Shear-lag model for a single fiber metal matrix composite with an elasto-plastic matrix and a slipping interface International Journal of Solids and Structures. 41: 4197-4218. DOI: 10.1016/J.Ijsolstr.2004.02.050 |
0.723 |
|
2003 |
Hanan JC, Üstündag E, Beyerlein IJ, Swift GA, Almer JD, Lienert U, Haeffner DR. Microscale damage evolution and stress redistribution in Ti-SiC fiber composites Acta Materialia. 51: 4239-4250. DOI: 10.1016/S1359-6454(03)00240-4 |
0.82 |
|
2002 |
Hanan JC, Aydiner CC, Üstündag E, Swift GA, Kaldor SK, Noyan IC. Characterization Of Fiber/Matrix Interfaces Using X-Ray Microtopography Materials Science Forum. 919-924. DOI: 10.4028/Www.Scientific.Net/Msf.404-407.919 |
0.798 |
|
2002 |
Hanan JC, Clausen B, Swift GA, Üstündag E, Beyerlein IJ, Almer JD, Lienert U, Haeffner DR. Microscale Residual Strains in Monolayer Unidirectional Fiber Composites Materials Science Forum. 913-918. DOI: 10.4028/Www.Scientific.Net/Msf.404-407.913 |
0.816 |
|
2002 |
Hanan JC, Üstündag E, Clausen B, Sivasambu M, Beyerlein IJ, Brown DW, Bourke MAM. Residual Strain Evolution during the Deformation of Single Fiber Metal Matrix Composites Materials Science Forum. 907-912. DOI: 10.4028/Www.Scientific.Net/Msf.404-407.907 |
0.71 |
|
2002 |
Vogel S, Ustundag E, Hanan JC, Yuan VW, Bourke MAM. In-situ investigation of the reduction of NiO by a neutron transmission method Materials Science and Engineering A. 333: 1-9. DOI: 10.1016/S0921-5093(01)01823-8 |
0.622 |
|
2002 |
Hanan JC, Swift GA, Üstündag E, Beyerlein IJ, Almer JD, Lienert U, Haeffner DR. Microscale elastic strain evolution following damage in Ti-SiC composites Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 33: 3839-3845. DOI: 10.1007/S11661-002-0256-5 |
0.826 |
|
2002 |
Hanan JC, Clausen B, Swift GA, Üstündag E, Beyerlein IJ, Almer JD, Lienert U, Haeffner DR. Microscale residual strains in monolayer unidirectional fiber composites Materials Science Forum. 404: 913-918. |
0.787 |
|
2002 |
Hanan JC, Üstündag E, Clausen B, Sivasambu M, Beyerlein IJ, Brown DW, Bourke MAM. Residual strain evolution during the deformation of single fiber metal matrix composites Materials Science Forum. 404: 907-912. |
0.358 |
|
2002 |
Hanan JC, Swift GA, Üstündag E, Beyerlein IJ, Almer JD, Lienert U, Haeffner DR. Microscale elastic strain evolution following damage in Ti-SiC composites Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 33: 3839-3845. |
0.799 |
|
2002 |
Hanan JC, Can Aydiner C, Üstündag E, Swift GA, Kaldor SK, Noyan IC. Characterization of fiber/matrix interfaces using X-ray microtopography Materials Science Forum. 404: 919-924. |
0.788 |
|
2001 |
Aydiner CC, Üstündag E, Hanan JC. Thermal-tempering analysis of bulk metallic glass plates using an instant-freezing model Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 32: 2709-2715. DOI: 10.1007/S11661-001-1023-8 |
0.778 |
|
1999 |
Ustundag' E, Clausen B, Hanan JC, Bourke MAM, Winholtz A, Peker A. Residual stresses in bulk metallic glasses due to differential cooling or thermal tempering Materials Research Society Symposium - Proceedings. 554: 431-436. |
0.377 |
|
1998 |
Ustundag E, Clausen B, Hanan JC, Bourke MAM, Winholtz A, Pekers A. Residual Stresses In Bulk Metallic Glasses Due To Differential Cooling Or Thermal Tempering Mrs Proceedings. 554: 431. DOI: 10.1557/Proc-554-431 |
0.718 |
|
Show low-probability matches. |